D471367 Detroit 7260 x Spicer 1330 Conversion U-Joint

D471367 Detroit 7260 x Spicer 1330 Conversion U-Joint is a special sized greaseable universal joint specifically made for conversion applications. The unequal length cross design allows you to couple a Detroit Universal 7260 series yoke to a Dana Spicer 1330 series yoke. The most common application is to couple QU40701 driveshaft slip yoke to a 1993 or older Dodge Axle or transmission end yoke. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joint Specs
No Direct OE Applications
Angles
Matching Parts
Applications

Tech Note 1: U-Joint Specs
One span of D471367 is made to Spicer 1330 series specification, 3-5/8" wide, external snap ring universal joint with 1-1/16" cups. The other span is Detroit Universal 7260 series internal snap ring with 1.078" diameter cups and fit yokes that measure 2-1/8" between the inside of the yoke ears.

Tech Note 2: No Direct OE Applications
To the best of my knowledge this universal joint does not have any direct original equipment applications. When using a conversion joint.

Tech Note 3: Angles
When using this conversion joint, your torque and driveshaft angles must be compatible with the smaller of the two u-joint sizes.

Tech Note 4: Matching Parts
Matching Parts for D471367 U-Joint:
QU40701 1330 Series 29 Spline based on 30 Spline Slip Yoke
QU40728 7260 Series 1-1/4" x 16 Spline Slip Yoke
QU40770 7260 Series 1-3/8" x 16 Spline Slip Yoke
QU90018 Pyroplex® Plus Synthetic Grease

Applications
Dodge:
1993 and prior conversion applications to adapt Spicer 1330 yoke to a Detroit Universal 7260 yoke