Description
QK4680 2005-current Ford F-250, F-350, F-450, F-550 Super Duty Knuckle and Hub Seal Kit includes the original equipment seals, o-rings, and gaskets that MUST be replaced anytime the axle shafts are removed from your Super Duty front axle. QK4680 includes: 2 QU20052 Knuckle Seals, 2 QU20045 wheel hub-to-knuckle O-Rings, 6 QU20046SC special hub screws, 2 QU20046HG hub gaskets, and 2 QU20181 lockout hub O-Rings.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Must Replace
To Install
2017-current Installation Spacer
Applications
Tech Note 1: Must Replace
Seal, Gasket, and O-Ring replacement is required anytime the axle shaft is removed to prevent vacuum leaks and or water infiltration.
Tech Note 2: To Install
2005 and newer Ford F250 to F550 Super Duty® axle shaft to knuckle seals are of a complicated unitized design that is easily damaged without the correct installer. To function with any longevity, QU20052 Seal must be installed with TS1530 (F250, F350) or TS1531 (F450, F550) Installer to a specific depth on both the axle shaft and in the knuckle. An improperly installed or damaged seal will allow water to enter and vacuum to escape.
Tech Note 3: 2017-current Installation Spacer
2017 and newer Super Duty also requires QT1551 Installation Spacer be placed between QU20052 Seal and QT1531 Installer Head which will seat the Seal approximately 0.030" deeper in the Knuckle as called for in 2017 and newer Ford Service Manuals.
Applications
Ford:
Ford F-250, F-350, F-450, F-550 Super Duty® 4x4 with Dana Super 60 Front Axles: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017*, 2018*, 2019*, 2020*
*See Tech Note 3
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.