Description
YY F100606 10.50 Ford Rear Axle Pinion Companion Flange Yoke replacement pinion flange for 10.5" Ford Sterling Rear Axles in 1999-early 2007 Ford F250, F350 Super Duty Single Rear Wheel trucks and 2000-2005 Ford Excursion.
Also See: QU20313 Genuine OE Dana Spicer Pinion Flange Yoke
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Always Replace
Pinion Crush Sleeve and Nut
Matching Parts
Applications
Tech Note 1: Always Replace
Always replace the pinion nut and crush sleeve when changing the pinion flange or seal. See QU20002 Nut and QU20000 Crush Sleeve.
Tech Note 2: Pinion Crush Sleeve and Nut
It will take A LOT of force to initiate the compression of a new pinion crush sleeve. Once it starts to collapse, the required torque will be reduced, but still high. You must tighten the pinion nut until all end-play is gone and you have reached the desired rotating preload. From too loose to too tight can take just a fraction of a turn! If you go over the maximum turning preload, you have to start over with a new QU20000. Never loosen the nut to get back to the desired setting!!!!!!
Tech Note 3: Matching Parts
QU20050 Pinion Seal
QU40887 1410 Series Drive Shaft Flange Yoke
QU20103 Driveshaft Attaching Bolt
QU20000 Crush Sleeve
QU20002 Pinion Nut
QU20003 Outer Pinion Slinger (fits between outer pinion bearing and Companion Flange)
Applications
Ford:
F250, F350 with Sterling 10-1/2" Rear Axle: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, to early 2007
Excursion: 2000, 2001, 2002, 2003, 2004, 2005
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
