YG D50R-456R 4.56 Ratio Yukon Dana 50 Performance Ring & Pinion Set

YG D50R-456R 4.56 Ratio High performance Dana 50 Yukon Ring & Pinion Gear Set for Dana 50 Reverse rotation axles in 1980-1997 Ford F250 Dana 50IFS, 1980-1985 Ford F350 Dana 50IFS, 1999-2002 Ford F250, F350 Dana 50 Monobeam, and 2000-2005 Ford Excursion Dana 50 Monobeam 4x4 front axles. Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon Engineers use state-of-the art design & testing processes, backed by 2 in-house quality labs to ensure each item manufactured meets exacting specifications & quality standards. Yukon designed gear tooth surface finish reduces both friction & heat for long races & high torque conditions. We use high grade steel in both the ring & pinion, with fitment designed to OEM specs. Go ahead, add loads of horsepower & go big on tires because Yukon offers the widest selection of gear ratios to choose from. You’ll know that your gear choice was the right one, because you chose Yukon.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Ford Only
Dana 50 vs Dana 60
1980-1997 IFF Axle
Matching Part 1999-2005 Monobeam Axle 
Applications

Tech Note 1: Ford Only
Ford is the only vehicle manufacturer to use Dana 50 front axles. Dana 50 axles were introduced for the 1980 model year as an independent front suspension axle for F250 heavy-duty (1980-1997) and F350 (1980-1985.5). The Dana 50IFS axle was built for the North American market through the 1997 model year. I believe, it was also used on overseas built F250s to 1998. The Dana 50 monobeam axle debuted in 1999 model year F250 and F350 4x4s followed by the Excursion in 2000. The monobeam axles had a relatively short production life of 6 years with production ending in 2005 when Ford axed the Excursion (Although some 2005 Excursions were sold as 2006 models in Mexico).

Tech Note 2:  Dana 50 vs Dana 60
The physical size of Dana 50 gear sets is about the same as the Dana 44. Although it was intended to replace the bigger Dana 60 in Ford's 1 ton and heavy 3/4 ton models, It never really compared well strength wise with the Dana 60s installed in Dodge and GM 1 tons. Ford replaced the Dana 50IFS with a Dana 60 monobeam front axle in midway through the 1985 model year. The single rear wheel version of the F350 again got a Dana 50 in 1999, but it was quickly replaced by a Dana 60. However, the Dana 50 did hold up well in 3/4 tons and Excursions which generally see easier service conditions than the F350.
Dana 50 Ring Gear Diameter is 9". Pinion Spline is 1-1/8" x 26 spline. Ring Gear Bolt Count is 10.
Dana 60 Ring Gear Diameter is 9-3/4". Pinion Spline is 1-1/4" x 29 spline. Ring Gear Bolt Count is 12.

Tech Note 3:  Matching Parts 1980-1997 D50IFF
TK4885 Torque King® Dana 50 Differential and Pinion Bearing Only Kit
QU50581 Dana 50 Differential Bearing and Seal Kit
QU20240U Used Dana 50 Loaded Differential Case
QU40578 Dana OE Pinion Seal (1980-1997)
QU40009 Dana OE Pinion Nut 
QU40010 Dana OE Pinion Yoke Washer
QU40002 Dana OE Outer Pinion Bearing Slinger (fits between bearing and yoke)
QU40527 Dana OE Inner Pinion Oil Baffle (fits between inner cup and housing)
QU40441 Dana OE Ring Gear Bolts (Ring Gear Bolts should NOT be reused)
QU40534 Right Diff Output Bearing and Seal Kit (for 1983-1997 right axle output shaft)
QU40576 Dana OE Pinion and Differential Shim Kit (1980-1997)
QU40087 Dana OE Left Axle Shaft Seal (1983-1997)
QU40088 Dana OE Right Axle Shaft Seal (1983-1997) 
QT1815 Inner Pinion Bearing Cup Installer
QT1812 Outer Pinion Bearing Cup Installer
QT1100 Driver Handle
QT1044 Inner Pinion Bearing Installer
TS4511 Ball Joint Press Set 
QU90009 Universal Axle Service Pack(Threadlocker, RTV Sealant, Gear Marking Compound, & Brush)
S24200 Medium Strength Threadlocker
QU90008 Gear Marking Compound
S82194 Ultra Gray RTV Sealant
QT9404 Brush for Gear Marking Compound

Tech Note 4: Matching Parts 1999-2005 D50 Monobeam
TK4885 Torque King® Dana 50 Differential and Pinion Bearing Only Kit
QU50581 Dana 50 Differential Bearing and Seal Kit
QU20240U Used Dana 50 Loaded Differential Case
QU40570 Dana OE Pinion Seal (1999-2000.5)
QU40411 Dana OE Flanged, Deep Shell Pinion Seal (2000.5-2005)
QU40405 Dana OE Pinion Outer Wiper V-Seal (1999-2005)
QU40009 Dana OE Pinion Nut
QU40010 Dana OE Pinion Yoke Washer
QU40002 Dana OE Outer Pinion Bearing Slinger (fits between bearing and yoke)
QU40527 Dana OE Inner Pinion Oil Baffle (fits between inner cup and housing)
QU40441 Dana OE Ring Gear Bolts (Ring Gear Bolts should NOT be reused)
QU40390 Dana OE Pinion Depth and Differential Shim Kit (1999-2005)
QU40208 Dana OE Pinion Crush Sleeve (Preload Spacer 1999-2005)
QU40244 Dana OE Axle Shaft Seals (requires 2 1999-2005)
QK4643 and QK4808 Inner Axle Seal and Tool Kits (1999-2005)
QU20039 Dana OE Inner Axle Shaft Guide (1999-2005)
QT1815 Inner Pinion Bearing Cup Installer
QT1812 Outer Pinion Bearing Cup Installer
QT1100 Driver Handle
QT1044 Inner Pinion Bearing Installer
TS4511 Ball Joint Press Set
QU90009 Universal Axle Service Pack(Threadlocker, RTV Sealant, Gear Marking Compound, & Brush)
S24200 Medium Strength Threadlocker
QU90008 Gear Marking Compound
S82194 Ultra Gray RTV Sealant
QT9404 Brush for Gear Marking Compound

Applications:  
Ford:
F-250 Dana 50IFS Twin Traction Beam: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
F-350 Dana 50IFS Twin Traction Beam: 1980, 1981, 1982, 1983, 1984, -1985.5
F250 Super Duty Dana 50 Monobeam: 1999, 2000, 2001, 2002
F350 Super Duty SRW Dana 50 Monobeam: 1999, 2000, 2001
Excursion Dana 50 Monobeam: 2000, 2001, 2002, 2003, 2004, 2005