TK40979 2" x 0.120" Premium DOM Driveshaft Tubing, Sold by the Inch

TK40979 2" x 0.120" Premium Seamless Drawn Over Mandrel (DOM) Steel Driveshaft Tubing is used to replace damaged tubing or to lengthen any driveshaft made with 2" outside diameter x 0.120" wall thickness driveshaft tubing. Most commonly found on the original equipment Saginaw Double Cardan Front Constant Velocity Driveshafts used on 1977½ to 1991 full size square body style Chevy/GMC 4x4s and 1975½ to 1993 Dodge and Plymouth full size 4x4s. Also fits 1978-1979 Ford Bronco with 2" OD Original Equipment front CV shafts. USA Made. SOLD BY THE INCH.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Driveshaft Fabrication
Applications

Tech Note 1: Driveshaft Fabrication
Requires welding and machine shop skills. Driveshaft fabrication can be done by any competent machinest, but best results are usually obtained from dedicated driveshaft specialists who can both assemble and balance the finished shaft. For information on driveshaft runout and balance, see my TM3000 Driveshaft and Universal Joint Service Manual or TM3000 Excerpt TSB3510 Vibration, Balance, Angles, Ratings, Run Out, Torque Specs.

Applications:

Chevy/GMC:
Full Size GM 4x4s with Saginaw Front Double Cardan CV Driveshafts: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991

Dodge:
Full Size Dodge and Plymouth 4x4s with Saginaw Front Double Cardan CV Driveshafts: 1975.5, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

Ford:
Bronco with 2" OD Original Equipment Front CV Driveshafts: 1978, 1979