QU40822 1-1/16" Cap Axle Universal Joint, Greaseable

QU40822 Greaseable Small Axle Universal Joint for Vintage Dana Spicer Open Knuckle Front Axles is a greaseable, front axle u-joint for late 1960s to early 1970s vintage Chevy, Dodge, Ford, GMC, IHC 1/2 ton and 3/4 ton light duty 4x4s with Dana 44 open knuckle front drive axles. Also fits Ford Bronco, IHC Scout, and Jeep CJ 4x4s with Dana 30 front axles. QU40822 is cross-drilled and one cap is drilled and tapped for the included flush-type grease fitting. 1310 series. 

Also See QU40792 Non-Greaseable Small Axle Universal Joint

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
U-Joint Specs
Matching Parts
Applications

Tech Note 1: U-Joint Specs
QU40822 is a greaseable, internal c-clip retained, axle universal joint with a cup diameter of 1-1/16". The inside span between your axle shaft yoke ears should be 2-3/16". This greaseable u-joint is adequate for smaller 4x4s like Jeeps and Broncos with 4 or 6 cylinder engines, but I do not recommend it be used in larger trucks or high performance vehicles with V-8 engines due to the small physical size of 1310 series u-joints. I installed a set of these in my wife's 1978 6-cyl CJ-7 in the early 1980's. They are still in the Jeep which is now owned by our nephew. If installed in the right vehicle and with regular greasing, these greaseable axle u-joints may out last you.

Tech Note 2: Matching Parts
Matching Parts for Axle U-Joints:
QK4734 Spindle Axle Shaft Bearing
QU40232 Bronze Spindle Thrust Washer for Early Production Vehicles
QU40043 2" ID Spindle Seal for Early Production Axles
QU40228 Spindle Seal and Bearing Kit for Later Production Axles (Large Seal ID is 2-1/4")

Applications

Chevy/GMC
Blazer with Open Knuckle Front Axle: 1969
GM 4x4 Dana 44 Open Knuckle Axle in Suburban, K10, K15, K20, K25: 1970, 1971, 1972.5

Dodge
W100, W200 with Dana 44 Open Knuckle Front Axle and small u-joint: 1970, 1971, 1972

Ford
Bronco Dana 30 Open Knuckle Axle: 1966, 1967, 1968, 1969, 1970, 1971, 1972
F-100 Dana 44 Open Knuckle Axle: 1967, 1968, 1969, 1970, 1971, 1972

International
Scout with Dana 30 Open Knuckle Front Axles: 1972, 1973, 1974, 1975, 1976, 1977
1/2 Ton Truck: 1971.5, 1972, 1973.5
Scout with Dana 44 Front Axle: 1973

Jeep
CJ Series: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986
Partial XJ with Dana 30: 1987, 1988, 1989, 1990, 1991, 1992