QU40756 1330 Series Greaseable CV Centering Yoke

QU40756 Greaseable CV Centering Yoke is used on many late 1970's to early 1990's, Ford 4x4s with Spicer type 1330 series Double-Cardan Front Constant Velocity driveshafts. USA Made except CV Ball Seal is imported.

The matching universal joints are QU40774 and TK40721. If needed, order QU40338 for the steel deflector ring on the Ball Stud Tube Yoke that protects the CV centering assembly. The center yoke is QU40759.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Tech Help
U-Joint Specs
Inspect Stud
Applications

Tech Note 1: Tech Help
For Constant Velocity service procedures, see my TM3000 Driveshaft and Universal Joint Service Manual or TSB3503 Spicer Style External Snap Ring Constant Velocity Service Bulletin.

Tech Note 2: U-Joint Specs
This yoke is drilled and tapped for 5/16" SAE bolts. Your u-joint cup size should be 1-1/16" and the width of the universal joint should be 3-5/8".

Tech Note 3: Inspect Stud
The 1/2" diameter stud that this Centering Yoke rides on MUST be in good condition. You must replace the Ball Stud Tube Yoke welded to your driveshaft if the stud is worn, grooved or otherwise chewed. Inspection details can be found in my TM3000 Driveshaft and Universal Joint Service Manual or TSB3503 Spicer Style External Snap Ring Constant Velocity Service Bulletin.

Applications
Ford Bronco and F-Series Truck 4x4's with Spicer type 1330 series Double-Cardan Front Constant Velocity Driveshafts: late 1970's - early 1990's