QK4013 Stock Rear Spindle Nut Kit with Socket for 1979-1993 Dodge

QK4013 1979-1993 Dodge Stock Rear Spindle Nut Kit with Socket fits 1979-1993 3/4 and 1-ton Dodge 3/4 ton and 1 ton trucks with Dana-Spicer 60 or Dana-Spicer 70 full float rear axles. Each QUADKIT™ includes 2 QU40118 Stock Spindle Nuts, 2 QU40089 Spindle Nut Lock Wedges, 2 QU40078 axle shaft Gaskets, QT1009i 1/2" drive Spindle Nut Socket, & 2 S9978 Threadlocker. Parts USA Made. Socket imported.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Single Use Parts
Seal Leaks
Matching Parts
Safety Note
Applications

Tech Note 1: Single Use Parts
QU40118 Spindle Nuts and QU40089 Spindle Nut Lock Wedges are "Single Use", genuine Dana Spicer original equipment components. These parts are designed to be installed once and only once! For safety reasons, you must discard both the nut and wedge if they are removed from the spindle for any reason. Both parts lose a percentage of their resistance to coming off when they are removed. You may hear of cases where this type of factory nut has come off while the truck was being driven. Invariably, these failures involve nuts and wedges that have been reused. I am not aware of a single instance of a properly installed new nut and wedge coming off like that. In my opinion, the original equipment nut design is as safe to use as our double nut sets as long as you follow the rules.

Tech Note 2: Seal Leaks
Many wheel seal leaks are caused by improper wheel bearing adjustment (For Dodge, See TSB4008).

Tech Note 3: Matching Parts
QU50414 Inner Wheel Bearing
QU50411 Outer Wheel Bearing Cup
QU50412 Outer Wheel Bearing
QU40450 Rear Wheel Seal
QU40449 Optional Flanged Rear Wheel Seal for 1994-2002
QU40078 Steel Axle Shaft Flange Gasket
QU15002 Spindle Lock Washer for 1972-1979.5
QU50413 Outer Wheel Bearing Cup
QU40089 Spindle Nut Lock Wedge for 1979.5-1993
QU40115 Spindle Nut Lock Wedge for 1994-2002
QU40577 Tapered Locking Bushing Cone for Axle Shaft Drive Studs
QU90018 Pyroplex Synthethic Grease
QU40367 Dana 70 Differential Cover Gasket
QU42030 Dana 70 Reuseable Differential Cover Gasket
QT1500 Wheel Seal Installer for QU40450 Seal 1979-1993
QT1510 Rear Wheel Seal Installer for QU40450 Seal 1994-2002
QT1503 Rear Wheel seal Installer for QU40449 Seal 1994-2002
QT1009i Spindle Nut Socket for 1979.5-2002
QT5500 Wheel Bearing Packer
Dodge & Ram Shop Manuals

Safety Note:
Stock Elastic Stop Spindle Nuts and Lock Wedges are designed to be installed once and only once! For safety reasons, you must discard both the nut and wedge if they are removed from the spindle for any reason. Both parts lose a percentage of their resistance of coming off when they are removed. You may hear of cases where this type of factory nut has come off while the truck was being driven. Invariably, these failures involve nuts and wedges that have been reused or improperly installed. NEVER REUSE FACTORY ELASTIC STOP SPINDLE NUTS and LOCK WEDGES!!!!!

Applications:
Dodge or Ram:
D200, W200, D300, W300: 1979, 1980 built after January 8, 1979
D250, W250, D350, W350 with Dana-Spicer Model 60 and Model 70 full float rear axles: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993