QU30187UBJ Used Right Steering Knuckle for 1975-1976.5 GM trucks

QU30187UBJ 1975-1976.5 Used Right Steering Knuckle for 1975-1976.6 Chevy and GMC K5 Blazer/Jimmy, K10/15, and K20/25 Suburbans and trucks with a tie rod located above the knuckle steering arm. This good used right Steering Knuckle was taken from an axle assembly our Research and Development Department had for part verification and tool design purposes. Available while supplies last.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
GM Steering Knuckles
Matching Parts
Applications

Tech Note 1: GM Steering Knuckles
GM used several different steering knuckles in 1973-1981 Dana 44 and 1977-1991 GM 10 Bolt front axles. The differences are in the length of the spindle studs, how the tie rod mounts and whether or not there is a tapped hole that takes a small bolt used to stabilize the brake shield. The ball joint and spindle holes machined in the knuckles are the same for all years.

Tech Note 2: Matching Parts
Matching parts for QU30186UBJ Left Steering Knuckle with New Ball Joints:
QU95035 All-Metal Lock Nut for Spindle Mounting Studs
QU40054 New Spindle Mounting Stud
QU40596 Spindle for 1975-1976.5 K5, K10/K15
QU40323GM Spindle for 1975-1976.5 K20/K25 (Wheel hub uses bolt-on lockout hub)
QU30159U Hub 1975-1976.5 K20/K25 (Wheel hub uses bolt-on lockout hub)
QU30164U Caliper Anchor Plate/Brake Shield Assembly

Applications
Chevy and GMC:
K5 Full Size Blazer/Jimmy: 1975, 1976.5
K10/K15/ 1/2 ton Suburban and Truck: 1975, 1976.5
K20/K25 3/4 ton Suburban and Truck: 1975, 1976.5