QT3000 Seal and Wear Sleeve Installer Plate for Cummins Diesel

QT3000 Seal and Wear Sleeve Installer Plate for 1989-2018 Cummins Diesel (See Tech Note 2 for 2019-up Ram). Use with QT9700A Handle. QT3000 is included in QK6000 Seal and Tool Kit and TS6000 Tool Set. QT3000 replaces Cummins Tool# 3824078

Instead of just purchasing the Installer, we recommend you order QK6000 Kit which includes:
1 QU10556 Teflon lip Crank Seal with plastic seal starter and centering guide
1 QT3000 CNC machined Aluminum Installer Tool
1 QT9700A Tool Handle and Hardware
2 Guide Studs and Hardware
2 Self-Tapping Screws
1 Drill Bit
2 Threadlocker (MSDS)
1 Anti Sieze (MSDS)
1 QT9404 Application Brush
TSB6000 Cummins Rear Crank Seal Replacement Tech Bulletin

WARNING: Items in this kit can expose you to chemicals including titanium dioxide, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Just need the tools? See TS6000 Rear Crankshaft Installation Tool Kit.
Already have the Tools? Order QU10556 Crank Seal with pilot and centering rings separately.
Need Instructions or Torque Specs? See TSB6000 Cummins Rear Crank Seal Replacement Tech Bulletin. The TSB6000 is now included in every QK6000 kit!

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Centering Ring
2019 and newer 6.7L Ram Trucks
Seal Installer
Seal Starter
Will not work on Ford
Matching Parts
QT3000 vs QT6050
Applications
Cummins Rear Crank Seal Replacement Video

Tech Note 1: Centering Ring
With the QK6000 Kit there is absolutely no need to remove the flywheel housing and rear seal adapter. However, if for any reason, you do need to remove the rear seal adapter from the back of the block, we do include a Cummins supplied stamped steel centering ring to center the rear seal adapter. The centering ring is required to center the seal retainer plate because Cummins did not dowel the seal retainer to the block so it can be installed off center unless you use the line up ring. The Seal Retainer Plate is gasketed to both the back of the block and the top of the oil pan.

Tech Note 2: 2019 and newer 6.7L Ram Trucks
Effective with the 2019 model year, Ram trucks with the 6.7L Cummins engine have crankshafts with a 10 hole flywheel bolt pattern instead of the 8 bolt pattern used for 2018 and prior years. The bolt circle and bolt thread is the same same so our QT3000 Installer and QU10556 Seal will still work on 2019 and newer engines, however Cummins also increased the seal installation depth and used a narrower seal so we are recommending you use our new QT6050 Installer and TK11895 Seal for 2019 and newer engines. QT6050 Installer and TK11895 seal are included in QK6020 Kit. TS6020 Tool Set includes QT6050 Installer.

Tech Note 3: Seal Installer
Our Aluminum Crank Seal Installer will install both replacement seals and QU11101 seals with wear sleeves to the correct depth on Cummins 4BT and 6BT Diesel engines. This includes Dodge trucks and most industrial, ag, marine, and automotive engines with 4BT and 6BT diesel engines. Replaces Cummins crank seal installer tool 3824078.

Tech Note 4: Seal Starter
The thin plastic disposable Seal Starter is pre-installed in the Seal. The Seal Starter is flared slightly to fit over the end of the crank. Once the Seal is slid over the Starter and onto the crank, remove and discard the Seal Starter.

Tech Note 5: Will not work on Ford!
Our installer does not install the rear crank seal on most Ford Cummins 5.9L Diesel engines!

Tech Note 6: Matching Parts
Related Parts and Tools for QT3000 Cummins Diesel Rear Crankshaft Seal Installer:
QU11101 Rear Crankshaft Seal with wear sleeve for Dodge Cummins
QU10523 Clutch Release Fork for 1989-1993 Cummins Diesel
QU10565 Clutch Release Fork for 1994-up Cummins Diesel
QU51002 Clutch Release Bearing Assembly for 1989-up Cummins Diesel
QU10558 Stock Needle Pilot Bearing for 1994-up Cummins Diesel
QU51010 Upgrade Ball Pilot Bearing for 1989-up Cummins Diesel
QK6007 Clutch Pivot Ball Kit for 1989-1993 Cummins Diesel
QK6005 Clutch Pivot Ball Kit for 1994-up Cummins Diesel
QK6008 Clutch Cover Bolt Kit for 1989-1993 with Sachs 13" original equipment type clutch
QK6010 Clutch Cover Bolt Kit for 1994-2004 5 Speed and 1999-2000 6 Speed (12.4" Clutch)
QK6015 Clutch Cover Bolt Kit for 2001-2005 6 Speed NV5600 Transmission (13" Clutch)
QK6009 Flywheel Bolt and Washer Kit for 1989-2005.5
QT3004 1-1/4"-10 Spline Clutch Alignment Tool for Dodge Diesel 5 Speed and 1999-2000 6 speed
QT3016 1-3/8"-10 Spline Clutch Alignment Tool for 2001-up 6 Speed
QT3001 Barring Tool for Dodge Cummins Diesel
Dodge & Ram Shop Manuals

Tech Note 7: Differences: QT3000 vs QT6050
Both our original QT3000 (incl. in QK6000 and TS6000 Kits) and our new QT6050 (incl. in QK6020 and TS6020 Kits) Crank Seal Installation Tools will work to install the rear crankshaft seal on all 1989 and up Dodge Ram Cummins Diesel engines. There are three differences between the 2 tools. QT6050 was designed to install the narrow shell 2019-up type seal which gets installed a bit deeper in the seal housing compared to the wider seal used on 2018 and prior models. The deeper depth is important when using a flywheel with a wide guide ring that fits over the end of the crank. QT6050 is just a seal installer, it cannot be used to install a wear sleeve on the crankshaft. QT3000 on the other hand can be used to install both plain seals and seals with a wear sleeve because the shallower seal installation depth allows us to step the tool to install a wear sleeve. However, there may be interference problems between the wear sleeve and some 2019-up flywheels with a wide guide ring. QT3000 has 2 holes for guide studs. QT6050 has 8 holes for guide studs. Four each for the 1989-2018 8 bolt and 2019-up 10 bolt crankshafts. With the exception of the number of guide studs used, the seal replacement procedure is the same for both tools. Although you can use either tool for all years, we recommend you use QT3000 Installer for 1989-2007 5.9L engines and QT6050 Installer for 2019-up 6.7L engines and either tool for 2007-2018 6.7L engines.

Applications:
Cummins:
4BT and 6BT Diesels

Dodge:
D250, W250, D350, W350 with the 5.9L Cummins Diesel: 1989, 1990, 1991, 1992, 1993
Ram 2500, Ram 3500 with the 5.9L Cummins Diesel: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2007.5
Ram 2500, Ram 3500 with the 6.7L Cummins Diesel: 2007.5-2018
Ram 4500, Ram 5500 with the 6.7L Cummins Diesel: 2008-2018

Cummins Rear Crank Seal Replacement Video