null

TK2501 Torque King® Master Overhaul Kit for 1994-1995 Dodge NP241DLD

Torque King Rebuild Kits
1 review Write a Review
$394.98
SKU:
2501
UPC:
198345084578
Condition:
New
Shipping:
Calculated at Checkout
In Stock & Ready To Ship!
Current Stock:Only left:

Description

TK2501 1994-1995 Dodge NP241DLD Transfer Case Torque King® Master Overhaul Kit is absolutely the highest quality and most complete NP241DLD transfer case overhaul kit available for your 1994-1995 Dodge Ram 2500 4x4 241DLD gas/Diesel Auto 94-96 wide bearing DLD for assembly numbers: 52098503, 52098530, 52098675, 52099035 and 52099041. Kit includes Genuine New Process and/or U.S.A. made ball bearings, genuine OEM Morse® Drive Chain, Torrington straight roller bearings, OEM quality Input/Output Seals and o-rings, plus all these Genuine OEM Small Parts: planetary thrust washers, all snap rings, shift fork pads, tailshaft housing bushing, oil pump hose, oil pump screen oil pump seal, front output spline seal, and front output lock nut. Also includes RTV sealant, and threadlocker. Each kit is custom tailored for your specific NP241DLD transfer case from original equipment parts lists. Mostly Made in U.S.A. Some components imported.

Also see TK2514 for 1994-1997 Dodge Ram 2500 with assembly numbers 52098151, 52098504, 52105335, 52105336, 52105368, 52105369 and 52105370.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Kit Components
Quality Parts
Transfer Case Savers
Oil

Housings
Drive Chain
No PTO
Matching Parts
Applications

Tech Note 1: Kit Components
TK2501 Kit Includes:
Bearings: QU50114, QU10879, QU50875, QU50873, QU50875
Bushing: QU10130
Chain: QU50071
Nut: QU10512
Oil Pump Parts: QU50177, QU10674, QU10673
O-Rings: (2) QU10800, QU10802, QU10825, QU10678
Mode Fork Pads: (2) QU10164, QU10574 (Mode Fork QU10929)
Range Fork Pads:
(2) QU10164, QU10875 (Range Fork QU50078 or QU50144AM)
Shift Link Grommet: (2) QU10589
Seals: QU10610, QU40366, TK10513, QU10824, QU10857
Snap Rings: QU10893, QU10814, QU10872, QU10818, QU10874, QU10816, (2) QU10873
Springs & Struts: (2) QU10820, (3) QU10821
Thrust Washers: (2) QU10572
Sealants: QU90006, S24200

Tech Note 2: Quality Parts
There are not any real "upgrade" parts for the NP241DLD series Transfer Cases. It is a pretty good transfer case for all gas and stock or mildly upgraded Cummins Diesel Dodge trucks when correctly assembled using original equipment quality parts. I rebuilt an awful lot of these things before I retired and I can tell you that I never saw any aftermarket rebuild kits that even comes close to the quality and completeness of our Master Overhaul Kits. If you want to do a first-class, long-lasting rebuild, these Kits are the only way to go.

Tech Note 3: Transfer Case Savers
Typically, the NP241 series transfer cases are usually the second longest lasting drivetrain component on a 1994-1997 Dodge Diesel truck (the Cummins is #1). Average life is in excess of 250,000 miles with recommended fluid changes. Other than just getting worn out, the only somewhat frequent failure area is the rear output shaft snap ring. It is not really all that common, but the snap ring has been known to fail, which allows the mainshaft to move forward. This will cause shift issues and almost always destroy the range fork. I personally believe most snap ring failures are related to overstretching the ring during installation, but you can eliminate this problem entirely by replacing the snap ring with one of our QK2069 Transfer Case Savers.

Tech Note 4: Oil
One way to kill your transfer case is to run it out of oil or with either wrong or dirty oil. My 1997 Dodge Shop Manual recommends 5.0 pints of Dexron II in the NP241DLD. I always use the synthetic version of the most current Dexron formula. The transfer case fluid should be changed every 36,000 miles to meet the Dodge maintenance schedule. Check your Dodge Ram truck owners manual for the specific lubrication recommendations for your year and model. Excessive horsepower is another way to murder your Transfer Case. From what I have seen, reliability starts to really suffer when input torque exceeds 700 lb.-ft.

Tech Note 5: Housings
Cracked or broken housings are usually a result of:
Accident Damage: A good whack on the front axle will push the axle and driveshaft backwards.
High Centered: Off-Roading or sliding into a ditch without a skid plate.
Loose Mounting Nuts: Make sure the six mounting nuts are tight.
Stretched Chain: Not real common, but a loose chain will wear through the bottom of the case.
Run Out of Oil. If the bearings seize, your Transfer Case is toast.

Tech Note 6: Drive Chain
Contrary to popular belief, the Drive Chain can not cause a clunk or contribute to "slack" in the drive train in 4x2 mode. The chain is only under power in 4x4 mode. You should always replace the chain when doing major transfer case service, plus you should inspect the sprockets for wear on the teeth. If you can feel teeth wear with your fingernail REPLACE BOTH the SPROCKETS and CHAIN!

Tech Note 7: No PTO
All 1994-1997 NP241DLD Transfer Cases will have a 32 slip yoke rear output with mechanical speedometer drive, left side chain driven front output, front CV flange and manual shift engagement. All 1994-1997 NP241DLD transfer cases will also have a 6-gear planetary 2.72:1 ratio low range, and a transfer case mounted vacuum switch, which controls the front axle disconnect system. The NP241DLD uses a 1-1/4" wide drive chain and does not have a provision to mount a Power Take Off (PTO). The NP241DLD was only used on Ram 2500 trucks.

Tech Note 8: Matching Parts
QK2069 Transfer Case Saver
TK2520 Bearing and Seal Kit
QU10942 Vacuum Hose Harness
QU10929 Mode Fork
QU50078 Aluminum Range Fork
QU50144AM Cast Iron Range Fork
QK2006 Front Output Flange Kit
QU50153 6 Pinion Planetary Assembly
QU10923 Speedo Drive Gear
QU50355 Upper Chain Sprocket
QU50513 Lower Chain Sprocket
QU11166 NP241 Synchronizer Hub
QT2050 Rear Output Bushing Remover/Installer
Dodge & Ram Shop Manuals

Applications:
Dodge:
Ram 2500 4x4: 1994, 1995 with NP241DLD with these Assembly Numbers: 52098503, 52098530, 52098675, 52098676, 52099035, 52099041

Warranty

Tools, New Parts, and Torque King® products in a kit or sold individually are warranted to the original purchaser to be free from defects in materials and workmanship for a period of one year from the date of sale. Certain Products, such as Warn® Hubs may be covered by additional manufacturer's warranties. THERE ARE NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE EXCLUSIVE REMEDIES FOR A WARRANTY CLAIM HEREUNDER IS RETURN OF THE GOODS TO TORQUE KING 4X4 FOR REPAIR, REPLACEMENT, OR REPAYMENT OF THE PURCHASE PRICE. ALL CLAIMS FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES ARE HEREBY EXCLUDED FROM THIS LIMITED WARRANTY.

Product Reviews

  • 5

    NP 241 overhaul kit

    Cody on Apr 20, 2022

    Comes with everything you need and looks like quality parts!

Delivery & Returns

Shipping times are estimated in your cart.

 

More info can be found at the link below.