TK2113 Premium Gasket and Seal Kit for 1973-1984 32 Spline GM NP205

TK2113 Torque King® Premium Quality Complete Gasket and Seal Kit for 1973-1984 Chevy and GMC New Process NP205 gear drive transfer cases with 32 spline input shaft feature Original Equipment Spec Precision-Thickness Gaskets, Genuine New Process Rear Output Yoke Spline Seal, and North American Made Original Equipment Quality Input/Output/Shift Rail Seals. Our Torque King® Premium quality Complete Gasket and Seal Sets are assembled with highest quality components for your specific NP205 application and are the most complete application specific NP205 Gasket and Seal Sets you can buy. Competitive Kits are assembled for generic applications so they rarely include all components required for your exact application, plus these generic kits use parts that do not even come close to meeting original equipment specifications to achieve a lower price when compared to original equipment parts such as those found in Torque King® Premium Gasket/Seal Kits for your Chevy or GM 4x4.

Also See Our TK2107 NP205 Master Overhaul Kit

TK2113 Fits:
1973-1984 32 Spline Female Input mates to Turbo 400, 700R4
8 Bolt, Figure 8 Adapter to Transfer Case Bolt Pattern
32 Spline Turbo 700R4 (4L60) See Tech Note 1.2
32 Spline Turbo 400: See Tech Note 1.3

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
1969-1991 Options
GM NP205
Rear Output Seal
RTV Sealant
Applications

Tech Note 1: 1969-1991 Options
1969-1991 GM Kit Options:

1. QU30034 Hourglass Gasket with Oil Channel Cutout for Muncie SM465 4 Speed Manual Transmission Main Transmission Case to the FRONT side of the Transmission to Transfer Case Adapter (also known as the Transmission Rear Extension Housing).
2. TK30046 Square cross-section O-Ring for 27 Spline Turbo 350 and 700R4 (4L60) Automatic Transmission Main Transmission Case to the FRONT side of the Transmission to Transfer Case Adapter (also known as Transmission Rear Extension or Bearing Housing).
3. TK30047 6 Bolt Gasket for Turbo 400 Transmission Main Case to the FRONT side of the Transmission to Transfer Case Adapter (also known as Transmission Rear Extension or Bearing Housing) to 1984. Can be used instead of TK30061 O-Ring in 1985-1990 vehicles with Turbo 400 Transmissions.
4. TK30061 square cross-section O-Ring for 1985-1990 Turbo 400 and 1991 4L80E Transmission Main Case to to the FRONT side of the Transmission to Transfer Case Adapter (also known as Transmission Rear Extension or Bearing Housing.
5. QU50435 Ball Bearing for the Turbo 350 Transmission Extension Housing in 1970-1972 GM 4x4s.

Tech Note 2: GM NP205
General Motors used direct mount New Process NP205 Transfer Cases from 1969 to 1991. The 205 was available on all full size 4x4 body styles up to 1980. From 1981 through 1991 the 205 was the only available in 1 ton K and V series square body style 4x4s.

Tech Note 3: Rear Output Seal
For maximum sealing of your fixed rear output yoke or remote mount input and front output yokes with 2-1/8" hubs, order a pair of our optional TK50092 Special Rear Output Seal which can be doubled for 2-1/8" input/output yoke applications.

Tech Note 4: RTV Sealant
Except for the PTO cover on later production models, NO RTV sealant was used on the NP205 Transfer Case or adapter. All shaft, coupler, and bearing clearances were designed for specific thickness cut paper gaskets. RTV sealant SHOULD NOT be used to replace any other NP205 gasket, however, you can use a VERY thin film on one side of a gasket to hold it in place during assembly or to fill in gouges in mating surfaces.

Applications
Chevy/GMC with NP205 Transfer Cases:
32 Spline Female Input mates to Turbo 400, 700R4: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984