QU20207 Hub Body to Wheel Hub Snap Ring Dana 50, Dana 60 1977-1997

QU20207 Dana 50, Dana 60 Hub Body to Wheel Hub Retaining Ring fits 1970s to 1990s heavy duty 3/4 ton and 1 ton 4x4s with Dana 50IFS, Dana 60, and Dana 61 front drive axles using Dana-Spicer or Warn® internal spline mount hubs. It also fits first generation Warn® QU56011 aftermarket replacement hub sets. This Ring expands into a groove machined in the wheel hub and it keeps the lockout hub body in place inside the wheel hub. QU20207 ALSO FITS 1995-1997 Ford F250, F350 Manual or Auto Hub-Locks and it is a genuine original equipment replacement wheel hub to hub-lock body Snap Ring for factory 3 Bolt Cap manual or automatic hub equipped 1995, 1996, 1997 Ford F-250 with Dana 50 front axles and 1995, 1996, 1997 Ford F-350 with Dana 60 front axles. Sold individually. Order two Snap Rings per vehicle.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Removal
Warn 11690 (M256) Snap Ring Design Change
Matching Parts for Warn 11690 (M256) Hubs
Matching Parts 1995-1997 F250
Matching Part 1995-1997 F350 
Applications

Tech Note 1: Removal: 
QU20207 Snap Ring fits in a groove machined in the inside of your wheel hub. We frequently have customers contact us for Tech Help in removing their lock out hub body. In most cases the problem is simply QU40150 hub snap ring is covered with grease so it can't be seen. Once the hub cap is off, you should be able to see the ring located in the wheel hub groove, if not, wipe away any grease. The ring ends are undercut, so once you locate the ring, it is easy to remove with a small screwdriver or pick.

Tech Note 2: Warn 11690 (M256) Snap Ring Design Change
Until around 2002, this Ring was supplied in Warn® plastic and brass dial aftermarket replacement hub sets for the Dana 50/60/61 axles. At that time, the body was redesigned and QU56017 Spiral Retaining Ring replaced this part. In most cases, the new Spiral Ring can not be used with older hub bodies unless the hub ID has a machined chamfer as there is insufficient clearance between the hub body shoulder and wheel hub to feed in the new ring.

Tech Note 3: Matching Parts for Warn 11690 (M256) Hubs
Exploded View XV106 Warn M256 11690 Dana 50/60 Manual Hub
QU56012 Hub Screw
QU40113 Torx® Type Upgrade Hub Screws
QU56017 2nd Design Spiral Type Hub Body Snap Ring
QU40068 Axle Shaft Snap Ring for Chevy. Dodge, and GMC
QU40155 Axle Shaft Snap Ring for Ford 
QU50116 Square Cross Section Cap to Wheel Hub O-Ring
QU56016 Round Cross Section Cap to Wheel Hub O-Ring
QU56013 Cap and Dial Assembly 
QU50186 Inner Hub Body 
QU56015 Hub Dial Decal Set
QU50240 Hub Dial O-Ring

Tech Note 4: Matching Parts 1977-1995

Exploded View XV1006 1977-1991 Chevy/GMC 1 Ton Dana 60 Front Axle
Exploded View XV1004 1990-1993 Dodge W250, W350 Dana 60/61 Front Axle
Exploded View XV1009 1980-1983.5 Ford Dana 50IFS Front Axle
Exploded View XV1014 1983.5-1994 Ford Dana 50IFS Front Axle
Exploded View XV1010 1995-1997 Ford Dana 50IFS Front Axle
Exploded View XV1015 1985-1991 Ford F350 Dana 60 Front Axle
TKA4962 Front Wheel Hub for Chevy, Dodge, GMC
TKA20332 Front Wheel Hub for Ford
QU56011 Warn M256 Hub Set
QU56111 Mile Marker Stainless Steel Hub Set

Tech Note 5: Matching Parts 1995-1997 F250
Matching parts for QU20207 Snap Ring in 1980-1997 Ford F250 and 1980-1985 Ford F350 Dana 50IFS Front Axles.
Exploded View XV102 1995, 1996, 1997 F250 Dana 50IFS Front Wheel Hub with hot links
Interactive XV1010 Exploded View, 1995-1997 Ford F250 Dana 50IFS Front Axle
QU20087 Auto Hub Service Kit
QU20208 Axle Shaft Snap Ring
QU20085 3 Piece Axle Shaft to Spindle Thrust Washer Set
QU52262 1995-1997 Hub Cap to Dial O-Ring
TK20739 Manual Hub Body Assembly
TKA4923 New Front Wheel Hub for 1995-1997
QK4729 4 Slot Spindle Nut Set 1995-1997 Except Auto Hubs with 3 Bolt Caps
QU20200 Rounded Hex Spindle Nut for 1995-1997 with 3 Bolt Cap Type Auto Hubs
QU20201 Spindle Nut Lock for 1995-1997 Ford with Auto Hubs
QU90018 Pyroplex Synthetic Grease
QT1110i or QT1018i 4 Lug Spindle Nut Sockets
QT1058i Rounded Hex Spindle Nut Socket For 1995-1997 Ford with Auto Hubs

Tech Note 6: Matching Parts 1995-1997 F350
Matching parts for QU20207 Snap Ring in 1978-1979 Ford F250, 1979 F350 and 1985-1997 F350 Dana 60 Front Axles
Exploded View 1995, 1996, 1997 F350 Dana 60 Front Wheel Hub with hot links
QU20087 Auto Hub Service Kit
QU20208 Axle Shaft Snap Ring
QU20085 3 Piece Axle Shaft to Spindle Thrust Washer Set
QU52262 1995-1997 Hub Cap to Dial O-Ring
TK20739 Manual Hub Body Assembly
TKA4923 New Front Wheel Hub for 1995-1997 SRW
QK4729 4 Slot Spindle Nut Set 1995-1997 Except Auto Hubs with 3 Bolt Caps
QU20200 Rounded Hex Spindle Nut for 1995-1997 with 3 Bolt Cap Type Auto Hubs
QU20201 Spindle Nut Lock for 1995-1997 Ford with Auto Hubs
QU90018 Pyroplex Synthetic Grease
QT1110i or QT1018i 4 Lug Spindle Nut Sockets
QT1058i Rounded Hex Spindle Nut Socket For 1995-1997 Ford with Auto Hubs

Applications:  

Chevrolet Dana 60:
K30, K3500: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987
K3500/V3500 1 Ton (square cab models): 1988, 1989, 1990, 1991

Dodge Dana 60, 61 with Internal Spline Type Wheel Hub:
W-350 1 Ton: 1990, 1991, 1992, 1993
W-250 all with Cummins Diesel: 1990, 1991, 1992, 1993

Ford Dana 50IFS 1980-1994 with Manuel Hubs:
F-250 with 4600 pound front axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
F-350: 1980, 1981, 1982, 1983, 1984, 1985, 1985.5

Ford Dana 60 1978-1994 with Manuel Hubs:
Heavy-Duty F-250, F-350: 1978, 1979
F-350: 1985.5 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994

Ford 1995-1997 F250, F350:
F250, F350 with 3 Bolt Cap Factory Auto or Manual Hubs: 1995, 1996, 1997

GMC Dana 60:
K35, K3500: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
K3500/V3500 1 Ton (square cab models): 1988, 1989, 1990, 1991