QT1186 Dana 30 and GM 10 Bolt Front Axle Seal Installer Thrust Plate

QT1186 Seal Installer Thrust Plate for Dana 30 and GM 10 Bolt Front Axles is used with QTA1133 (1977-1991 GM 10 Bolt) or QT1189 (1972-current Dana 30) Press Screw and the correct Seal Installer for your axle to install the inner axle shaft oil seals in solid beam 4x4 front axles without vacuum controlled Central Axle Disconnect. 5/8" USS internal threaded hole allows you to adjust the thrust plate in for Dana 30 axles and out for GM 10 bolt front axles. Made in U.S.A. by Us Here in Montana.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Must Be Removed
Fits
Matching Parts
Applications
CAD Drawing

Tech Note 1: Must Be Removed
Your brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace the axle shaft seals.

Tech Note 2: Fits
Thrust Plate fits against Differential Bore Face when pressing in opposite axle seal. (Thrust Plate has 5/8" threaded center hole.)

Tech Note 3: Matching Parts
Matching Parts/Tools for QT1186 Thrust Plate:
QT1139 Seal Installer for QU40307 Seal in 1972-2006 Jeep Dana 30 Front Axles without Vacuum Disconnect
QT1165 Seal Installer for QU40055 Seal in 1977-1991 GM 10 Bolt Front Beam Drive Axle
QT1203 Seal Installer for QU40812 Seal in 2007-2017 Jeep Dana Super 30 Front Axles

Applications
(Incomplete)

Chevy/GMC:
Blazer, Jimmy, Suburban with GM 10 Bolt: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
K10/15/1500, V1500 with GM 10 Bolt: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987
K20/25/2500, V2500 with GM 10 Bolt: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987

Jeep:
CJ Series (includes CJ-5, CJ-6, CJ-7, and CJ-8 Scrambler): 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986
Commando: 1972, 1973
XJ without Vacuum Controlled Central Axle Disconnect (includes Cherokee, Small Wagoneer, and Comanche): 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Left Side Jeep XJ with vacuum CAD: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
YJ Wrangler (Jeep and Dana websites list the YJ up to the 1996 model year. Most online histories state there was "Jeep did not offer a 1996 YJ"): 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
ZJ Grand Cherokee (The ZJ was introduced in early 1992 as a 1993 model year vehicle): 1993, 1994, 1995, 1996, 1997, 1998
TJ Wrangler with the Dana 30 Front Axle: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
WJ Grand Cherokee: 1999, 2000, 2001, 2002, 2003, 2004
JK Wrangler with the Dana 30 Front Axle: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

CAD Drawing is Large File that may take Longer to Load. Click HERE if CAD file is not visible.