TKA11732 Single Rear Wheel Hub for 1987-1993 Dodge Dana 70 Rear Axles

TKA11732 SRW Hub and Bearing Cup Assembly for 1987-1993 Dodge 3/4 and 1 Ton trucks with Dana 70 Rear Axles and 1/2" Wheel Studs is a Premium, Brand New rear wheel hub complete with Wheel Studs and Timken bearing cups for 1987-1993 D/W 250 3/4 ton and D/W350 1 ton trucks with Single Rear Wheels (SRW), rear drum brakes and 1/2" Wheel Studs. TKA11732 is new USA made, Heavy-Duty Steel rear wheel hub for your 1987-1993 Ram 3/4 ton or 1 Ton Single Rear Wheel Dana 70 Rear Axle. TKA11732 is CNC machined from a solid billet of high strength steel for maximum strength and durability under the toughest conditions. TKA11732 replaces discontinued Chrysler Dodge Mopar 4383429, 53007767, and 3496574 OEM Hubs.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
SRW Only 
Hub Assembly
Wheel Bearing Adjustment 
Lubrication 
Axle Vent 
Grease Deflector or Slinger
Matching Parts
Safety Note
Applications

Tech Note 1: SRW Only 
We often get requests about converting a Single Rear Wheel (SRW) Rear Axle to a Dual Rear Wheel (DRW). TKA11732 ONLY fits 1987-1993 Single Rear Wheel Rear Axles with 1/2" Wheel Studs. The drum offset, spindle length and inner wheel bearing/wheel seal diameters are different between the SRW and DRW rear axles!

Tech Note 2: Hub Assembly
TKA11732 is a Hub Assembly that includes (8) QU80034 1/2" Wheel Bolts and installed Timken Bearing Cups. The wheel bolts or studs are shipped loose because the brake drum must be installed on the hub before you press the studs in.

Tech Note 3: Wheel Bearing Adjustment
Under Construction

Tech Note 4: Lubrication
The Rear Wheel Bearings and Bearings need to be packed with grease to provide initial lubrication before you install the hub assembly on the rear axle spindle.

Tech Note 5: Axle Vent
Always check to make sure the axle vent system is clear. A plugged vent will cause axle pressure to build up which can blow out new wheel seals in a hurry.

Tech Note 6: Grease Deflector or Slinger
Dodge used TK11735 stamped steel Grease Deflector or Slinger to help protect the brake shoes from oil contamination in the case of a wheel seal leak. TK11735 Slinger is no longer available. Like your original hub, TKA11732 Hubs are sized to accept the slingers if they are in good shape and the ID of the matching drum is also sized accurately. The slingers were always a very tight fit between the drum and hub. If the slinger is thickened from being pressed together during the original installation, damaged/rusty or the drum bore is either dirty or slightly under size it may be impossible to install and reuse the slinger. In that case, you will have to install the drum without the slinger.

Tech Note 7: Matching Parts
QU50414 Inner Wheel Bearing
QU50413 Inner Wheel Bearing Cup (included with Hub)
QU50411 Outer Wheel Bearing Cup (included with Hub)
QU50412 Outer Wheel Bearing
QU40450 Rear Wheel Seal
QU40078 Axle Shaft Flange Gasket
QU80000 12" Rear Brake Drum
QU40077 Spindle Nut
QU40089 Spindle Nut Lock Key
QU40535 Axle Shaft Bolt for 1991-1993
QU42238 Rear Hub Stud and Cone Kit for 1972-1990
TK40478 32 Spline Axle Shaft for 1991-1993 SRW
TK40584 35 Spline Rear Axle Shaft for 1987-1990 SRW Pickup
QT1009i Spindle Nut Socket
QU90018 Pyroplex Plus Synthetic Grease
QU90021 Spicer Premium Synthetic Grease

Exploded View: Available Soon!

Safety Note:
Stock Elastic Stop Spindle Nuts and Lock Wedges used on 1979-1993 Dodge Ram Dana 60 and Dana 70 rear axles are designed to be installed once and only once! For safety reasons, you must discard both the nut and wedge if they are removed from the spindle for any reason. Both parts lose a percentage of their resistance of coming off when they are removed. You may hear of cases where this type of factory nut has come off while the truck was being driven. Invariably, these failures involve nuts and wedges that have been reused or improperly installed. NEVER REUSE FACTORY ELASTIC STOP SPINDLE NUTS and LOCK WEDGES!!!!!

Applications
Dodge:
D350, W350 with Single Rear Wheels and 1/2" Wheel Bolts: 1987, 1988, 1989, 1990, 1991, 1992, 1993