QU11165 NLA Inner Spindle Thrust Washer Dana 44 Front Axles

DISCONTINUED

QU11165 Spindle Thrust Washer for Dodge, International, and Jeep Dana 44 Front Axles fits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3/4" hex spindle nuts and external mount wheel hubs. One of these washers is used on each side between the outer wheel bearing and inner spindle nut. Sold individually.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Fits
Tab
1.750" Thread Spindle
Matching Parts
Applications

Tech Note 1: Fits
This Thrust Washer fits 1957-1974 Dodge, 1956-1975 International, and 1968-1973 Jeep trucks with front spindles that have 1-3/4' threads and wheel hubs that are drilled and tapped with 6 3/8" holes in a 3-3/4" bolt circle to mount an external drive flange or lockout hub. QU10576 washer is NOT used on 1964-1975 International 1/2 ton 4x4s or 1969-1974 Dodge W-100 4x4 trucks with 3-3/8" diameter internally splined wheel hubs.

Tech Note 2: Tab
QU11165 Spindle Thrust Washer has an internal tab that fits a 1/4" spindle key slot. It is not uncommon to find a spindle with slightly mashed threads at the outboard end which will reduce the slot width. If present, this condition will need to be fixed before you can install the thrust washer.

Tech Note 3: 1.750" Thread Spindle
International and Jeep truck year and model application information is often difficult to precisely list due to the relatively low production numbers and the fact that both manufacturers often built special purpose vehicles for government and vocational applications. Regardless of the application information, if you have a front spindle with 1.750" thread, QU11165 is the correct part for your 4x4.

Tech Note 4: Matching Parts
Matching Parts for QU11165 Spindle Nut Thrust Washer:
QU11164 Hex Spindle Nut with 1-3/4" Thread
QU10576 Spindle Lock Washer (goes between outer and and inner spindle nuts)
TK40573 Gasket for Lockout Hub or Drive Flange
QU50704 Front Wheel Seal
QU50701 Wheel Bearing Cup
QU50702 Wheel Bearing 1-3/4" ID
QU50703 Wheel Bearing 1-13/16" ID
TK4924 Front Wheel Bearing Kit 1957-1968 Dodge and 1956-1971.5 IHC
TK4926 Front Wheel Bearing Kit 1969-1974 Dodge, IHC, and 1968-1973 Jeep
QT1013 2-1/2" Hex Spindle Nut Socket

Applications

Dodge:
W100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974

International:
100, 1100 1/2 ton with 6 bolt, external mount hub with 3-3/4" bolt circle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963
120, 1200 3/4 ton: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975

Jeep:
J4000 with 8000 pound GVW including Camper Special: 1968, 1969, 1970
J4800 with 8000 pound GVW including Camper Special: 1971, 1972, 1973