QT1115 Dana 44 Differential Side Bearing Installer

QT1115 Dana 44 Differential Side Bearing Installer for all Dana-Spicer Model 44 front or rear axles. QT1115 features a raised internal ring that contacts the bearing inner face so you can press or drive your diff bearings on without damaging the cage. 5/8" center hole accepts our QT1100 or QT1116 Driver Handles or any other driver with a 5/8" pilot. Made in Montana, U.S.A.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Tool Benefits
Applications

Tech Note 1: Tool Benefits
Over the years, I have seen a lot of diff bearings installed with makeshift methods that failed prematurely. The soft cage and both the hardened rollers and races are easily damaged from rough handling. Bearings are kind of like eggs, they can take tremendous pressures in certain directions, but are easily wrecked by applying impact force in the wrong place. The big difference is a bearing that fails can cause an accident that injures or kills you, while crushing an egg just means you get some shell bits in your omelette! With the QT1115, your installation force is applied entirely to the inner race face, thereby preventing you from harming the cage, races, or rollers.

Applications:
Most 1965-1999 Dana 44 Front or Rear Axles