QU11082 NV271, NV273 Fixed Yoke Type Transfer Case Rear Extension Housing

QU11082 2005-2012 New Venture NV271, NV273 Dodge & Ford Fixed Yoke Type BARE Transfer Case Rear Extension Housing is a genuine original equipment New Venture/New Process Tailshaft Housing for 2007 to 2012 Dodge Ram 3500, Ram 4500, and Ram 5500 4x4 cab and chassis trucks with New Process/New Venture NV271D Manual Shift or NV273D Electric Shift Transfer Cases with fixed rear output yokes. QU11082 ALSO fits 2005 Ford Excursion and 2005-2007 Ford Super Duty® F-250, F-350, F-450, F-550 4x4 trucks with New Process/New Venture NV271F Manual Shift or NV273F Electric Shift Transfer Cases with fixed rear output yokes. USA Made or Mexico.

NOTE: This housing Does NOT include QU20215 Rear Output Needle Bearing and QU80048 Rear Output Seal which must be ordered separately!

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Sealant
Matching Parts
Older vs. Newer Housings
NPG-NVG-MPT
Applications

Tech Note 1: Sealant
Use QU90005 or QU90006 RTV Sealant to Seal between the extension housing and rear case half.

Tech Note 2: Matching Parts
QU11015 Rear Case Half
QU90005 or QU90006 RTV Sealant

Tech Note 3: Older vs. Newer Housings
QU11082 and QU20189 1999-2004 Extension Housing use the same casting (25443), but have different rated rear output needle bearings. The needle bearing in the QU11082 is a caged needle bearing capable of higher operating speeds.

Tech Note 4: NPG-NVG-MPT
The 271F and 273F transfer cases were built at Chrysler's New Process Gear plant in Syracuse, New York until that plant closed in 2010 and assembly was shifted to Mexico. When production of these transfer cases began in mid 2002, the New Process plant was operated by New Venture Gear, hence the NV prefix. New Venture, which was a joint venture between Chrysler and General Motors folded a short time later. The NV prefix continued to be used even after New Process was sold to Canadian owned Magna, but you may find later models referred to NP instead of NV models. For a specific assembly number, the Transfer Case and all the component parts are the same, regardless if it is identified as an NP or NV assembly.

Applications:
Dodge NV271D, NV273D:
Ram 3500, Ram 4500, Ram 5500 4x4 Cab & Chassis Trucks with Fixed Rear Output Yokes: 2007, 2008, 2009, 2010, 2011, 2012

Ford NV271F, NV273F:
Ford Excursion 4x4s with Fixed Rear Output Yokes: 2005
Ford Super Duty® F-250, F-350, F-450, F-550 4x4 trucks with Fixed Rear Output Yokes: 2005, 2006, 2007