QU10990 1st Design 29 Spline NV271D, NV273D Transfer Case Input Shaft

QU10990 1st Design 29 Spline NV271D, NV273D Transfer Case Input Shaft for Dodge/Ram Ram 2500, Ram 3500 4x4 Trucks is a genuine New Process Input Gear that includes QU10904 Single Row Input to Mainshaft Pilot Bearing. Use on 2003-2012 NV271D and NV273D transfer cases behind most Dodge Ram 2500, Ram 3500 trucks with manual transmissions or some 2007-up pickups having Aisin automatics with 29 spline output shafts. USA Made.

Also See: QU10990U Used 29 Spline Input Shaft available while supplies last.
See Tech Note 2 for Assembly Numbers.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Conversions
Assembly Numbers
Matching Parts
New Venture/New Process/Magna
Applications

Tech Note 1: Conversions
NV271 and NV273 Transfer Cases are often used in conversion applications. All the Input Shafts from both Dodge and Ford models will interchange in the planetary. Besides spline size/count, Input Shaft length differences and transmission output seal size must be taken into consideration.

Tech Note 2: Assembly Numbers
QU10990 Input Shaft is used in these Transfer Case Assembly Base Numbers:
NV271D: 52105649, 52853061
NV273D: 52105651, 52123025
If you have base assembly numbers 52123155 or 52123156, see QU11083

Tech Note 3: Matching Parts
Matching Parts for QU10990 29 Spline Input Shaft are:
QU11001 Planetary Assembly
QU10900 Outer Planetary Thrust Washer
QU10572 Inner Planetary Thrust Washer
QU50667 Planetary Lock Plate (Outer Metal Thrust Washer)
QU10814 Plantary Snap Ring
QU50250 Input Bearing
QU10952 Input Bearing to Input Shaft Snap Ring
QU50254 Input Seal
Dodge & Ram Shop Manuals

Tech Note 4: New Venture/New Process/Magna
When Ford (1999 models) and Dodge (2003 models) first used NV271 and NV273 transfer cases, New Process Gear (NPG) of East Syracuse N.Y was part of New Venture Gear (NVG). When NVG dissolved, NPG continued on under Chrysler. Chrysler subsequently sold the production rights to Magna, a Canadian automotive parts company. All these name changes are confusing, but the important thing to know is a specific assembly number for any 271F, 271D, 273D, and 273F transfer case is the same and uses the same replacement parts regardless of it was built by New Venture, New Process, or Magna.

Applications
Dodge Ram NV271 and NV273 Transfer Cases. See Tech Note 2 for Assembly Numbers.