Description
QU10936 Oil Pump for 1996-2002 Dodge 31 Spline Rear Output NP241DHD is a replacement part for all Dodge Ram 2500, Ram 3500 with 31 Spline Rear Output in New Process NP241DHD Transfer Cases. Pre-assembled, 31 spline pump includes QU50177 Oil Pump Seal. Order QU10802 O-ring, and QU10823 Oil Pump Feed Tube separately.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Prime Pump!!
Standard Issue
Matching Parts for 1996.5-1997 NP241DHD
Matching Parts for 1998-2002 NP241DHD
Applications
Tech Note 1: Prime Pump!!
Your new Oil Pump is shipped dry. You must prime pump with Drone® automatic transmission fluid by squirting some fluid through the inlet hole as you rotate the center drive plate. These pumps lubricate the whole input and output shaft setup. You will not like the results if you fail to prime the pump!
Tech Note 2: Standard Issue
NP241DHD Transfer Cases were standard on Dodge Ram 3500 trucks and optional on Ram 2500 trucks. Early versions of the NP241DHD had a two piece extension housing and a small 32 spline output shaft and use oil pump QU50423. Later versions, (possibly a few 1996 trucks and most 1997, plus all 1998-2002) have a one piece rear housing, 31 spline rear output shaft and use this pump.
Tech Note 3: Matching Parts for 1996.5-1997 NP241DHD
Exploded View XV4001 1996.5-1997 Dodge Ram NP241DHD Transfer Case
QU10872 Synchro Hub to Mainshaft Snap Ring
QU10820 Synchro Strut Tension Spring
QU11166 Synchro Hub
QU10821 Synchro Strut
QU50354 Synchro Sleeve
QU10819 Synchro Ring
QU50000 Drive Chain
QU10921 Upper Chain Drive Sprocket
QU50177 Oil Pump Seal
QU10802 O-Ring
QU10823 Oil Pump Feed Tube
QU10673 Oil Pump Pickup Hose
QU10674 Oil Pump Screen
QU50191 Chip Magnet
QU10817 Rear Output Shaft to Rear Bearing Snap Ring
QU50207 Rear Output Bearing
QU10815 Rear Output Bearing to Case Snap Ring
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 3-1/4 Quarts to Fill
Tech Note 4: Matching Parts for 1998-2002 NP241DHD
Exploded View XV4003 1998-2002 Dodge Ram NP241DHD Transfer Case
QU10872 Synchro Hub to Mainshaft Snap Ring
QU10820 Synchro Strut Tension Spring
QU11166 Synchro Hub
QU10821 Synchro Strut
QU50354 Synchro Sleeve
QU10819 Synchro Ring
QU50000 Drive Chain
QU10921 Upper Chain Drive Sprocket
QU50523 Rear Output Mainshaft
QU50177 Oil Pump Seal
QU10802 O-Ring
QU10823 Oil Pump Feed Tube
QU10673 Oil Pump Pickup Hose
QU10674 Oil Pump Screen
QU50191 Chip Magnet
QU10817 Rear Output Shaft to Rear Bearing Snap Ring
QU50207 Rear Output Bearing
QU10815 Rear Output Bearing to Case Snap Ring
QU40354 Rear Output Slip Yoke
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 3-1/4 Quarts to Fill
Applications
Dodge Ram 2500, 3500:
Only those models with 31 spine rear output NP241DHD Transfer Cases: 1996, 1997
NP241DHD Transfer Case: All 1998, 1999, 2000, 2001, 2002
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
