QU10893 Transfer Case 0.094" Input Shaft Snap Ring

QU10893 0.094" Input Shaft Snap Ring for 50mm New Process and New Venture Transfer Case Input Shafts fits many New Process and New Venture Transfer Case Input Shafts from 1973 to current. For the NP205, QU10893 is one of 4 Selective Fit Input shaft Snap Rings  Chevy/GMC 32 spline, Dodge 29 spline, and Ford 31 spline NP205 Transfer Case input shafts. For all other applications QU10893 is THE correct thickness snap ring for popular models with 50mm diameter Input Shafts including NP231, NP241, NP246, NP233, NP242, and many more. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Thickness Tolerance
Limited Availability
For NP205, Measure Thickness Needed
Tech Manual
GM NP246 Assemblies
Matching Parts for 1994-2002 NP241DHD Transfer Cases
Matching Parts for 1994-2002 NP241DLD Transfer Cases
Matching Parts-Saved for Future Use
Matching Parts-Saved for Future Use
Applications

Tech Note 1: Thickness Tolerance
Thickness tolerance is +/-0.0015".

Tech Note 2: Limited Availability
Most original equipment Replacement Parts for the NP205 Transfer Cases have been out of production since 1993. Our inventory of selective fit Lock Rings diminishes almost daily. If you see your desired Snap Ring is Sold Out, order the next smallest available size.

Tech Note 3: For NP205, Measure Thickness Needed
In most cases, the input ball bearing can be pushed into place on an NP205 input shaft. Before assembling the input shaft into the transfer case, temporarily install the bearing on the shaft and measure the exposed groove thickness. To minimize input shaft end-play, the thickest Snap Ring that will naturally fit in the input shaft snap ring groove and against the installed input bearing is desired. New Process offered four Snap Ring widths (0.088" QU10599, 0.091" QU10891, 0.094" QU10893, 0.097" QU10892) for the big input versions of the NP205.

Tech Note 4: Tech Manual
Need Tech Help on rebuilding your NP205? Get my TM2000 New Process NP205 Transfer Case Service Manual. A Complete NP205 shop Manual with over 375 color photographs is your indispensable NP205 resource for Repair Procedures and Parts Identification. Complete coverage of Disassembly, Inspection, and Reassembly Procedures. Also, Shop Notes, Tool Recommendations, Complete Parts Guide, and full color Exploded Views (includes all of TM2002), including Right Drop and Left Drop Models, plus GM Specific Parts. Covers New Process NP205 Transfer Cases found in Chevrolet, Dodge, Ford, GMC, and International Harvester (IHC) 4x4 vehicles from 1969-1993.
Or my TM2002 for the Exploded Views and Parts Guide only. Fully Illustrated with dozens of crisp color photographs for EASY Parts Identification! This Manual includes 10 page Parts Identification Guide with full color Exploded Views.

Tech Note 5: GM NP246 Assemblies
The QU10893 Snap Ring was used on the Input Shaft and Front Output Shaft Front on these GM NP246 assemblies:
15753790
24240015
24240016
(list not complete)

Tech Note 6: Matching Parts for 1994-2002 NP241DHD Transfer Cases
Exploded View XV4000 1994-1996.5 Dodge Ram NP241DHD Transfer Case
Exploded View XV4001 1996.5-1997 Dodge Ram NP241DHD Transfer Case
Exploded View XV4003 1998-2002 Dodge Ram NP241DHD Transfer Case
QU11039 Planetary Lock Plate
QU50873 Input Ball Bearing, 15/16" Thick
QU10814 Snap Ring, Input to Planetary
QU10857 Input Seal
QU10572 Input Shaft to Planet Thrust Washer (uses 2)
QU50494 Planetary Assembly, most 1994-1996 NP241DHD and all 1997-2002
QU50150 Range Sliding Sleeve

Tech Note 7: Matching Parts for 1994-2002 NP241DLD Transfer Cases
Exploded View XV4002 1994-1997 Dodge Ram NP241DLD Transfer Case
Exploded View XV4004 1998-2002 Dodge Ram NP241DLD Transfer Case
QU11039 Planetary Lock Plate
QU50873 Input Ball Bearing, 15/16" Thick
QU10814 Snap Ring, Input to Planetary
QU10857 Input Seal
QU10572 Input Shaft to Planet Thrust Washer (uses 2)
QU50153 Planetary Assembly, most 1994-1996 NP241DLD and all 1997-2002
QU50152 Range Sliding Sleeve

Tech Note 8: Matching Parts
Saved for Future Use

Tech Note 9: Matching Parts
Saved for Future Use

Applications
(Partial Listing)

Chevy and GMC:
NP203, NP205 (32 Spline Input), NP231C, NP241C Left Drop, NP246

Dodge:
NP203, NP205 (29 Spline Input), NP231D, NP241D, NP241DLD, NP241DHD

Ford:
NP203 Direct Mount