QU10829 0.096" Snap Ring for NPG Transfer Cases & Manual Transmissions

QU10829 0.096" Thick Shaft Snap Ring for New Process Transfer Cases and Manual Transmissions 0.096" (+/- 0.0015") Selective input shaft Snap Ring is used to secure small bore input ball bearings to Chevy/GMC 10 or 27 spline and Dodge 23 spline NP205 Transfer Case input shafts. To minimize input shaft end-play, the thickest Snap ring that will naturally fit in the input shaft snap ring groove and against the installed input bearing is desired. New Process offered four Snap Ring widths (QU10826) 0.087", (QU10816) 0.090", (QU10828) 0.093", (QU10829) 0.096" for the small input versions of the NP205. This Snap Ring is for Input or Rear Output Applications. Also Fits NP435, NP535, and NV2500 Manual Transmissions. These Snap Rings ALSO fit 1980-1991 GM Slip Yoke Type Rear Output Shafts. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Thickness Tolerance
Limited Availability
Before Assembly
Matching Parts
Applications

Tech Note 1: Thickness Tolerance
Thickness tolerance is +/-0.0015".

Tech Note 2: Limited Availability
Most original equipment Replacement Parts for the NP205 Transfer Cases have been out of production since 1993. Our inventory of selective fit Lock Rings diminishes almost daily. If you see your desired Snap Ring is Sold Out, order the next smallest available size.

Tech Note 3: Before Assembly
In most cases, the input ball bearing can be pushed into place on a NP205 input shaft. Before assembling the input shaft into the transfer case, temporarily install the bearing on the shaft and measure the exposed groove thickness.

Tech Note 4: Matching Parts
Exploded View XV4005 1980-1993 Dodge NP205 Transfer Case
QU10816 0.090" Snap Ring
QU10826 0.087" Snap Ring
QU10828 0.093" Snap Ring

Applications
(Incomplete List)

Chevy/GMC:
New Process NP205 Transfer Case
New Process NP241C Transfer Case
New Process NP246C Transfer Case
Slip Yoke Type Rear Output Shafts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991

Dodge:
New Process NP205 Transfer Case
New Process NP241DLD Transfer Case: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002