Description
QU10817 Rear Output Shaft Snap to Rear Output Bearing Snap Ring Two of these Snap Rings are used to center QU50207 Rear Output Bearing to the Mainshaft for most New Process NP241DHD Transfer Cases. Two more (for a total of 4) are used to secure the speedometer drive gear on 1996 and 1997 model year units. This Ring fits ALL 1998 to 2002 NP241DHD models and those 1996 and 1997 NP241DHD transfer cases with the 31 Spline Rear Output Shafts and 2.200" diameter rear slip yokes. NP241DHD transfer cases were optional on the Ram 2500 and standard on the Ram 3500. USA Made.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
When Ordering
Matching Parts for 1996.5-1997 NP241DHD
Matching Parts for 1998-2002 NP241DHD
Applications
Tech Note 1: When Ordering
Ordering parts for 1996 and 1997 NP241DHD transfer cases can be confusing because there were 2 versions being used by Dodge for those years. Most 1996 transfer cases will have a two piece tailshaft housing, have a 32 spline output shaft, and use a driveshaft slip yoke with an outside diameter of approximately 1-13/16". As far as I have seen, these small output cases all have 8 digit assembly numbers that begin with 5209. You will also find a few 1996 trucks and most 1997 ones that have a NP241DHD using a large bore, one piece tailshaft housing. The output shaft has 31 splines, slip yoke diameter is just a bit over 2-3/16" and all the 8 digit assembly numbers I have seen start with 5210.
Tech Note 2: Matching Parts for 1996.5-1997 NP241DHD
Exploded View XV4001 1996.5-1997 Dodge Ram NP241DHD Transfer Case
QU10872 Synchro Hub to Mainshaft Snap Ring
QU10820 Synchro Strut Tension Spring
QU11166 Synchro Hub
QU10821 Synchro Strut
QU50354 Synchro Sleeve
QU10819 Synchro Ring
QU50000 Drive Chain
QU10921 Upper Chain Drive Sprocket
QU50177 Oil Pump Seal
QU10936 Oil Pump
QU50207 Rear Output Bearing
QU10815 Rear Output Bearing to Case Snap Ring
Tech Note 3: Matching Parts for 1998-2002 NP241DHD
Exploded View XV4003 1998-2002 Dodge Ram NP241DHD Transfer Case
QU10872 Synchro Hub to Mainshaft Snap Ring
QU10820 Synchro Strut Tension Spring
QU11166 Synchro Hub
QU10821 Synchro Strut
QU50354 Synchro Sleeve
QU10819 Synchro Ring
QU50000 Drive Chain
QU10921 Upper Chain Drive Sprocket
QU50523 Rear Output Mainshaft
QU50177 Oil Pump Seal
QU10936 Oil Pump
QU50207 Rear Output Bearing
QU10815 Rear Output Bearing to Case Snap Ring
QU40354 Rear Output Slip Yoke
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 3-1/4 Quarts to Fill
Applications
Dodge Ram 2500 and Ram 3500 4x4:
With large bore NP241DHD Transfer Cases (Use 4 QU10817 Rings): 1996.5, 1997
Dodge NP241DHD Transfer Cases (Use 2 QU10817 Rings) All: 1998, 1999, 2000, 2001, 2002
Warranty
Product Reviews
-
Snap Ring
Worked perfect, fast shipping.
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.