Description
QK1058 1992-2007 NV4500 1-2 Synchronizer Assembly Without Shift Interlock is a New Venture Gear 1st-2nd Synchronizer Assembly for 1992-2005 Dodge and 1995-2007 GM NV4500 5 speed manual transmissions. QK1058 is factory assembled and it includes QU10038 Hub, QU10081 Clutch Ring, and QK1100 Synchro Strut Kit. NOTE: The shift Interlock feature was usually not used on transmissions with 5.61:1 1st gear ratio. Synchronizer assemblies do not include synchro rings.
Also see QU10215 1-2 Synchro Assembly with Shift Interlock for 1992-1994 GM
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Synchro Assemblies
Synchro Rings
NV4500 Tools
Matching Mainshaft Parts
Matching Synchronizer Parts
Lubricants, Sealants, Threadlockers
Matching Parts
Applications
Tech Note 1: Synchro Assemblies
QK1058 and QU10215 1-2 Synchronizer Assemblies for New Venture NV4500 5 speed manual transmissions are physically interchangeable. The interlock feature, which was used on 1992-1994 GM transmissions with 6.34: 1st gear ratio, was designed to prevent high speed down shifting in 1st and 2nd gear. To accomplish this, four sliding blocks and two springs are added to the synchro hub. When the mainshaft is rotating at high speeds, centrifugal force pushes the blocks against the sliding clutch ring and locks it in place. The early synchro hubs were slotted for the four blocks, plus there was four holes in it for the spring hooks. Once the interlock feature was abandoned after 1994/1995, the synchro hub was redesigned to eliminate the hub slots and holes. If you have the early QU10215 Synchronizer with interlock, you can convert it to a non-interlock unit simply by removing the four flyweight blocks and two c-shaped springs. The sliding hub plus the synchro springs and rectangular struts are the same for all years and models.
Tech Note 2: Synchro Rings
All New Venture NV4500 transmissions use three synchronizer rings for 1st gear and for 2nd gear. The inner and outer rings are made of steel, while the center ring is faced with carbon fiber on both sides.
Tech Note 3: NV4500 Tools
Need Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.
You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.
TOOLS for SPECIFIC NV4500 MODELS |
||||||
Component | 23 Spline Dodge 4x4 NV4500LD |
29 Spline Dodge 4x4 NV4500HD |
30 Spline Dodge 4x2 NV4500LD |
31 Spline Dodge 4x2 NV4500HD |
32 Spline GM 4x4 |
35 Spline GM 4x2 |
Mainshaft Nut | QT2002 | QT2001 QT2036 |
QT2002 | QT2001 QT2036 |
QT2002 QT2028 |
1-1/2" Hex Socket |
Mainshaft Holding | NLA | QT2000 | NLA | QT2011 | N/A | N/A |
5th Gear Nut Torx® Cross Bolt |
N/A | QT9205 | N/A | QT9205 | N/A | N/A |
Output Seal Installer | N/A | QT1801 | N/A | QT2058 CALL |
Not Used | Not Used |
Tailshaft Bushing Remover and Installer | Not Used | Not Used | Not Used | QT2044 | Not Used | Not Used |
TOOLS For ALL NV4500 MODELS |
||||||
Countershaft Front Bearing Cup Installer |
QT1802 | Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal | ||||
Countershaft Front Bearing Installer | QT2004 | Can also use to press 3-4 Synchro Hub on original equipment mainshafts | ||||
Input Bearing & Countershaft Rear Bearing Installer | QT2005 | Can also use to install Input Seal | ||||
Input Bearing Cup Installer | QT1801 | Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle. | ||||
Countershaft Support | QT2006 | Use to support front of countersahft when installing countershaft rear bearing | ||||
1-2 Synchronizer Support | QT2008 | Use to support 1-2 synchronizer hub during synchronizer assembly | ||||
10mm 1/2" Drive 12 Point Socket | QT1020 | USA Made Impact Socket for Factory Tailshaft Housing Bolts | ||||
Long Shank Punch for Shift Lug | QT9300 | 3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin |
Tech Note 4: Matching Mainshaft Parts
Matching Popular Mainshaft Part Numbers for QK1058 1st-2nd Synchro are:
Application | Mainshaft | Engine | Output Spline |
1992-1993 Dodge 4x4 1994-2005 Dodge NV4500LD |
QU10214 | Gas V8 | 23 |
1994-2004 Dodge 4x4 NV4500HD | QA1045 or QU10011 |
Diesel or V10 | 29 |
1995-2004 Dodge 4x2 NV4500HD | QU10013 | Diesel or V10 | 31 |
1992-2007 GM 4x4 | QU10098 | All | 32 |
1997-2007 GM C-Series 4x2 | QU10719 | All | 35 |
Tech Note 5: Matching Synchronizer Parts
NV4500 Transmissions have 3 1st Gear Synchronizer Rings. Matching Synchronizer Parts are:
Gear | Synchronizer Assembly |
Synchronizer Hub |
Synchronizer Slider |
Strut Kit |
Synchronizer Ring |
1992-1993 Dodge |
QK1058 | Not Available | QU10081 | QK1100 | QU10002** |
1992-1995 GM |
QU10215* | Not Available | QU10081 | QK1100 | QU10002** |
1994-1995 Dodge | QK1058 | QU10038 | QU10081 | QK1100 | QU10002** |
1996-2007 All | QK1058 | QU10038 | QU10081 | QK1100 | QU10002** |
*QU10215 1-2 Synchronizer Assembly with Shift Interlock can be replaced by QK1058 if desired. The Shift Interlock was intended to prevent down-shifting at high speeds.
**QU10002 is the Center Friction Ring. QU10014 is the Inner Steel Ring. QU10015 is the Outer Steel Ring.
Tech Note 6: Lubricants, Sealants, Threadlockers
Early production NV4500 Transmissions used an anaerobic sealant (QU90003) to seal between the main case and input bearing retainer, top cover, and rear housing. Mid-production units used anaerobic sealant just on the input retainer and RTV for everything else. Later production transmissions used black RTV Sealant (QU90006 or QU90005) for everything. Either type of sealant works fine (except the PTO covers ALWAYS should be sealed with RTV), but I prefer RTV for all components. Regardless of which sealant you use, make sure excess sealant does not block the lube access hole at the top of input retainer pilot that fits into the transmission case! Also, the threaded holes in the main case for the four retainer bolts and 12 PTO bolts are open ended, so you must use new bolts with factory applied threadlocker or apply Threadlocker (S24200) to your existing bolts to prevent oil seepage past the bolt threads. See my TM1003 NV4500 Shop Manual or VSG1003DVD NV4500 Overhaul Video for more information.
Lubricant and Chemical List for NV4500 Transmissions:
QU90020 NV4500 Manual Transmission Oil
QU90003 Anaerobic Sealant
QU90006 3.35 oz Ultra Black RTV Sealant
QU90005 0.5 oz Ultra Black RTV Sealant
S24200 6ml Medium Strength Blue Threadlocker
S9978 1 gram Medium Strength Blue Threadlocker
S9979 1 gram High Strength Red Threadlocker
S24026 High Temperature Threadlocker for Mainshaft Nut
Tech Note 7: Matching Parts
Other Matching Parts for QK1058 1st-2nd Synchro:
QU10002 Synchronizer Ring, Center Friction
QU10014 Synchronizer Ring, Inner Steel
QU10015 Synchronizer Ring, Outer Steel
QK1103 Snap Ring Kit, 1-2 Synchro
QU10075 39 Tooth Mainshaft 1st Gear
QU10035 37 Tooth Mainshaft 2nd Gear
QU10052 1-2 Shift Fork
QU10001 Premium Bearing and Seal Kit 1992-1996 Dodge
QU10005 Premium Bearing and Seal Kit 1997-2005 Dodge
QU10061 Premium Bearing and Seal Kit 1992-1995 GM 4x4
QU10062 Premium Bearing and Seal Kit 1996-2005 GM 4x4
QU10063 Premium Bearing and Seal Kit 1992-1995 GM 4x2
QU10064 Premium Bearing and Seal Kit 1996-2007 GM 4x2
QU90020 NV4500 Manual Transmission Oil
TM1003 NV4500 Shop Manual
VSG1003DVD NV4500 Overhaul Video
Chevy & GMC Shop Manuals
Dodge & Ram Shop Manuals
Applications
Chevy and GMC:
C1500, K1500, C2500, K2500, C3500, C3500HD, K3500 with NV4500 5 Speed: 1995, 1996, 1997, 1998, 1999
C2500, K2500, C3500, K3500 Standard and HD Pickup based models with NV4500 5 Speed: 2000, 2001, 2002, 2003, 2004, 2005, 2006
C3500HD 15,000 Lb. GCVW Cab and Chassis with NV4500 5 Speed: 2000, 2001, 2002
C2500, K2500 Silverado Classic and Sierra Classic with NV4500 5 Speed: 2007
Dodge and Ram:
D250, W250, D350, W350 with Cummins Diesel AND our NV4500 Transmission Retrofit Kit: 1989, 1990, 1991, 1992, 1993
Ramcharger, D150, W150 with NV4500 5 Speed: 1992, 1993
D250, W250, D350, W350 with Gas Engine and NV4500 5 Speed: 1992, 1993
Ram 2500, Ram 3500 with V10 and NV4500HD 5 Speed: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Ram 2500, Ram 3500 with Cummins Diesel and NV4500HD 5 Speed: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Ram 2500, Ram 3500 with gas V8 and NV4500LD 5 Speed: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.