Name: QU10047 1998-2002 Dodge NV4500 Shift Tower
Brand: New Venture-MPT
SKU: 10047
Price: 173.98 USD
Rating: 5 (1 reviews)

Description
Warranty
Delivery & Returns
Product Reviews

Description

QU10047 1998-2002 Dodge NV4500 Shift Tower is a direct replacement for 1998-2002 Dodge Ram 2500, and 3500 trucks with the NV4500 Transmission. Also replaces discontinued QU10714 Shift Tower for 2003-2005 Dodge. 14mm coarse thread shifter connection.

Also see QK1127 Dodge Shift Tower Kit

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Will Also Fit
New Venture/Aftermarket Suppliers
Early and Late Shift Towers
NV4500 Tools
Matching Parts
Applications

Tech Note 1: Will Also Fit
QU10047 Shift Tower will fit all 1998 to 2005 Dodge NV4500 series 5 speed manual transmissions. The exact replacement tower for 2003-05 Ram trucks is no longer available, but you can use QU10047 on the 2003-2005 transmissions because the only difference is the threaded stub on QU10047 1998-2002 tower is longer compared to now discontinued QU10714 2003-2005 tower. Except for the stub length difference the two towers are identical.

Tech Note 2: New Venture/Aftermarket Suppliers
New Venture purchased complete shift towers from another vendor. New Venture never offered individual shift tower replacement parts and rubber seals nor have any aftermarket suppliers.

Tech Note 3: Early and Late Shift Towers
All 1998-2005 Dodge with 14mm coarse thread shift stub and 1995-2000 GM with 16mm fine thread shift stub NV4500 Shift Towers are physically interchangeable on the covers. In 2001 GM introduced the GMT 800 2500HD and 3500HD Chevy Silverado and GMC Sierra trucks. Vehicle Identification Number based (VIN) GM electronic parts books show two shift covers and towers for 2001-2002. The difference is the height of the cover shift tower base and length of the shift tower stub. The early cover as used for year 2000 and prior plus some 2001-2002 has a shift tower base that is about 3/4" high and it uses a short shift stub. The 2001 and later cover has a base that is approximately 1" high, accepts towers with a longer stub and it was used on all the 2003-2007 Silverado and Sierra trucks. The Dodge and early GM towers are not interchangeable with late GM shift towers.

Tech Note 4: NV4500 Tools
Need Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.

You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.

TOOLS for SPECIFIC NV4500 MODELS
Component	23 Spline Dodge 4x4 NV4500LD	29 Spline Dodge 4x4 NV4500HD	30 Spline Dodge 4x2 NV4500LD	31 Spline Dodge 4x2 NV4500HD	32 Spline GM 4x4	35 Spline GM 4x2
Mainshaft Nut	QT2002	QT2001 QT2036	QT2002	QT2001 QT2036	QT2002 QT2028	1-1/2" Hex Socket
Mainshaft Holding	NLA	QT2000	NLA	QT2011	N/A	N/A
5th Gear Nut Torx® Cross Bolt	N/A	QT9205	N/A	QT9205	N/A	N/A
Output Seal Installer	N/A	QT1801	N/A	QT2058 CALL	Not Used	Not Used
Tailshaft Bushing Remover and Installer	Not Used	Not Used	Not Used	QT2044	Not Used	Not Used
TOOLS For ALL NV4500 MODELS
Countershaft Front Bearing Cup Installer	QT1802	Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal
Countershaft Front Bearing Installer	QT2004	Can also use to press 3-4 Synchro Hub on original equipment mainshafts
Input Bearing & Countershaft Rear Bearing Installer	QT2005	Can also use to install Input Seal
Input Bearing Cup Installer	QT1801	Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle.
Countershaft Support	QT2006	Use to support front of countersahft when installing countershaft rear bearing
1-2 Synchronizer Support	QT2008	Use to support 1-2 synchronizer hub during synchronizer assembly
10mm 1/2" Drive 12 Point Socket	QT1020	USA Made Impact Socket for Factory Tailshaft Housing Bolts
Long Shank Punch for Shift Lug	QT9300	3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin

Tech Note 5: Matching Parts
The Matching Parts for QU10047 Dodge NV4500 Shift Tower are:
QK1127 Shift Tower Kit
QK1025 Shift Lever Kit
(4) QU10155 Spacer/Bushing
(4) QU10156 Bolt
QU10157 Metal/Rubber Tower Spacer Plate
QU90005 RTV Sealant
QU10706 Shift Cover Assembly

Applications:

Dodge:
Direct Replacement for Ram 2500, Ram 3500 with NV4500 5 Speed: 1998, 1999, 2000, 2001, 2002
Optional Replacement Ram 2500, Ram 3500 with NV4500 5 Speed: 2003, 2004, 2005

Warranty

Tools, New Parts, and Torque King® products in a kit or sold individually are warranted to the original purchaser to be free from defects in materials and workmanship for a period of one year from the date of sale. Certain Products, such as Warn® Hubs may be covered by additional manufacturer's warranties. THERE ARE NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE EXCLUSIVE REMEDIES FOR A WARRANTY CLAIM HEREUNDER IS RETURN OF THE GOODS TO TORQUE KING 4X4 FOR REPAIR, REPLACEMENT, OR REPAYMENT OF THE PURCHASE PRICE. ALL CLAIMS FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES ARE HEREBY EXCLUDED FROM THIS LIMITED WARRANTY.