Description
Y100003 Yukon Spin Free® Front Locking Hub Conversion Kit for 2012-2018 Dodge Ram 3500 Dual Rear Wheel 4x4s fits 2012-2018 AAM 9-1/4" front axles in Dual Rear Wheel (DRW) Ram 3500 4x4s. The Yukon worry free, Spin Free® Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new ABS compatible wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, low-profile Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation. Imported.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Conversion Kits
Included Components
To Install
Allow Clearance
Recommend
Ball Joints
Before Installing
Matching Parts 2012-2013.5
Matching Parts 2013.5-2017
Applications
2012-2018 Dodge Ram AAM 9-1/4" Front Axle | |||
| Hub Lock Choices | Conversion | Torque King Premium Kits with Parts, Axle U-Joints, Tools, and More for 2012-2017 Ram 2500, Ram 3500 with Single Rear Wheels | Conversion |
| With Milemarker® Stainless Hub Locks GOOD | TK11298 includes Dynatrac CR60-3X1104-K Kit with Mile Marker® instead of Warn® Hubs | TK4960 | QU42073 Arrowcraft Adapter Set for DRW Ram 3500 |
| With YUKON® Hub Locks BETTER (Import) | Y100014 Yukon YAWU-13 Spin-Free® Kit with Yukon Hubs | N/A | Y100003 |
| With WARN® Premium Hub Locks BETTER (USA) | TK11255 includes Full Dynatrac CR60-3X1104-K Kit with Warn® Hubs | TK4945 includes: TK11255 Dynatrac Kit QK4964 Install Kit 2 TK50253 Axle U-joints QT1025 Nut Socket Threadlocker | QU42073 Arrowcraft Adapter Set for DRW Ram 3500 |
| With DYNALOC™ Hub Locks BEST | TK11256 includes Full Dynatrac CR60-3X1104-L Kit with Dynaloc™ Hubs | TK4953 includes: TK11256 Dynatrac Kit QK4964 Install Kit 2 TK50253 Axle Joints QT1025 Nut Socket Threadlocker | QU42073 Arrowcraft Adapter Set for DRW Ram 3500 |
| Dynaloc is a Trademark of Dynatrac Products Inc. Free-Spin is a Trademark of Dynatrac Products Inc. Mile Marker is a Registered Trademark of Mile Marker Incorporated Spin Free is a Registered Trade Mark of Ring & Pinion Service Inc. Torque King is a Registered Trade Mark of 4x4 Tech Inc. Yukon is a Registered Trade Mark of Ring & Pinion Service Inc. | |||
Tech Note 2: Included Components
Included Components for | |||
| Component | Dynatrac Free-Spin™ USA Made | Torque King USA Made (includes Dynatrac Free-Spin™) | Yukon Spin Free® Import |
| Wheel Hub, for SRW Applications | √ | √ | √ |
| Wheel Hub for DRW Option | *** | *** | √ * |
| Timken Wheel Bearings | √ | √ | √ |
| Timken Wheel Bearing Cups installed in Hubs | √ | √ | √ |
| Wheel Seals | √ | √ | √ |
| Spindle | √ | √ | √ |
| Spindle Bearings/Seals | √ | √ | √ |
| Locking Hubs | √ 3 Choices** | √ 3 Choices** | √ Yukon |
| ABS Compatible (2000-up only) | √ | √ | √ |
| Spindle Nut Set | √ | √ | √ |
| Outer Axle Shaft, 1-1/2" 35 Spline | √ | √ | √ |
| Axle U-Joint 1994-2002 Greaseable USA | √ | ||
| Axle U-Joint 2003-2009 Non-Greaseable USA | √ | ||
| Axle U-Joint 2010-up Non-Greaseable Mexico | √ | ||
| Wheel Studs | √ | √ | √ |
| Inner Axle Shaft Dust seal 2000-2002 Only | √ | ||
| Spindle Nut Socket | √ | ||
| Wheel Seal Installer with Handle | √ | ||
| Wheel Bearing Packer with Cover 1# Capacity | √ | ||
| Synthetic Waterproof Grease, 2 14 oz. Tubes | √ | ||
| Threadlocker | √ | ||
| Anti-Seize Compound with Brush | √ | ||
| *Direct Fit Yukon Wheel Hubs Not Available for 1994-1999 DRW. Optional Wheel Adapter Set Required for 1994-1999 Dual Rear Wheel applications ** Available with Dynaloc™, Mile Marker®, or Warn® Lockout Hubs ***Dynatrac does not offer Direct Fit Wheel Hubs for DRW trucks. Optional Wheel Adapter Set Required | |||
Tech Note 3: To Install
To install Y100003 Kit, you need to remove the original hubs and axle shafts. Depending upon age, mileage, and use, your truck may also need inner axle shaft oil seals, ball joints, brake parts, or pinion seal. Inspect the axle before disassembly for worn or damaged parts and order those extra parts/tools you desire for a first class job.
Tech Note 4: Allow Clearance
To allow clearance for your new wheel hubs, your front wheels must have center holes that are at least 4-1/4" in diameter.
Tech Note 5: Recommend
I strongly recommend you also order QT1025 Spindle Nut Socket and QK4964 Tool and Lube Kit which has the extras you need for a pro-quality installation. All the components are also available separately. QK4964 includes:
QT1505 Wheel Seal Installer
QT1100 Drive Handle for Seal Installer
(2) QU90018 14 oz. Tubes Pyroplex Plus Synthetic Grease (One is used to fill the Bearing Packer)
S9975 Anti-Seize (Use between the spindle and knuckle and on the brake shield mating surfaces)
QT9404 Brush for applying anti-seize
QT5500 Bearing Packer with Cover
Tech Note 6: Ball Joints
We also stock TK42058 Dynatrac, Heavy-Duty greaseable/rebuildable Ball Joints and TK11266 Carli Extreme Duty greaseable Ball Joints for 2012 and early 2013 Ram 2500, Ram 3500 with the 4 trailing arm type front suspension. Later 2013, and 2014-up with radius arm front axle suspension use different ball joints.
Tech Note 7: Before Installing
Unless it is less than 1 year old, the first time a 2012-2017 Ram 2500, Ram 3500 AAM 9-1/4" front axle has to comes apart, it is usually an absolute WITCH to separate the factory wheel hub assemblies from the steering knuckle as AAM did not use any anti-corrosion compound between the wheel hub flange and steering knuckle. The good news is since you are replacing the original hubs, you do not have to worry about them separating or getting damaged during the removal process.
Tech Note 8: Matching Parts 2012-2013.5
With 4 short control arm type front axle suspension:
TK50253 Axle U-Joint
QT1025 Spindle Nut Socket
TK42058 Dynatrac, Heavy-Duty greaseable and rebuildable Ball Joints for 2012-2013.5
TK11266 Carli Extreme Duty Ball Joints 2012-2013.5
QK4586 AAM OEM Ball Joint Kit for 2012-2013.5
QK4964 Tool and Lube Kit
QU10861 Steering Knuckle to Wheel Hub Bolt
QU10965 Differential Cover Gasket for 2012-2013.5
QU11103 Differential Cover Bolts
QU50823 Left (short side) Inner Axle Shaft 2012-2013.5 Discontinued
QU50824 Right (long side) Inner Axle Shaft 2012-2013.5
QT1008i Axle Shaft Nut Socket for removing your original nut
QK4685 Inner Axle Shaft Seal and Installer Tool Kit
TS4965 Ball Joint Press Set for Dynatrac Ball Joints
QT1109 Hub Bolt Socket
QT1103 Driver Handle or QT1073 (NLA)Air Hammer Attachment
QT9216 Hex Bit Socket
QT1072 Hub Puller
Tech Note 9: Matching Parts 2013.5-2018
With 2 long radius arm type front suspension:
TK50253 Axle U-Joint
QT1025 Spindle Nut Socket
QU11302 AAM OEM Ball Joint Kit 2013-5-2018
QK4964 Tool and Lube Kit
QU10861 Steering Knuckle to Wheel Hub Bolt
QT1008i Axle Shaft Nut Socket for removing your original nut
QK4685 Inner Axle Shaft Seal and Installer Tool Kit
QT1109 Hub Bolt Socket
QT1103 Driver Handle or QT1073 (NLA) Air Hammer Attachment
QT1072 Hub Puller
Applications:
Dodge and Ram:
Ram 2500, Ram 3500: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
