- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
QU40037 2" ID Bent Tab Spindle Lock Washer for Chevy, Ford, and GMC
9940037$5.98QU40037 Bent Tab Spindle Lock Washer for Chevy, Ford, and GMC Axles is a essential replacement part for front and rear hub or axle service. QU40037 fits 1978-1984 Ford and 1977-1981 GM front Dana 60 axles AND 1946-1981 GM full-floating H052,... -
QU95036 7/16" Fine Thread All Metal Class C USA Made Lock Nut
95036$1.98QU95036 7/16" Fine Thread Class C Lock Nut for Front Spindle and Universal Applications is an American Made, high-strength, All-Metal locknut compatible with Grade 8 bolts. QU95036 is most commonly used with QU40539, QU40540 to secure the front axle... -
QK4729 1981-1997 Dana 50, 60 3-Piece, Round Front Spindle Nut Kit
4729$57.98QK4729 1981-1997 Dana 50, Dana 60 3-Piece, Round Front Spindle Nut Kit with 4 Slot Spindle Nuts includes one each of these genuine Dana Spicer parts: QU40163 Outer Spindle Nut, QU40164 Spindle Lock Washer, and QU40166 Inner Spindle Nut with Pin. This nut... -
QU40038 2" ID Flat Spindle Thrust Washer for Chevy, Ford, GMC
9940038$6.98QU40038 2" ID Flat Spindle Thrust Washer for Front or Rear Axles is the reusable, service replacement Inner Spindle Thrust Washer for 1978-1984 Ford and 1977-1981 GM front Dana 60 axles AND 1946-1981 GM full-floating H052, H072, and GM 14 Bolt rear... -
QA40168 Dana 50/60 Spindle Bearing and Seal Kit
40168$32.98QA40168 Dana 50/60 Spindle Bearing and Seal Kit has genuine Dana Spicer original equipment components. This Kit replaces your worn original equipment parts on 1975-1993 3/4 ton and 1 ton Chevy, Dodge, Ford, GMC, and IHC 4x4 trucks equipped with Dana... -
QU40064 Outer Axle Shaft Slinger
40064$6.98QU40064 Outer Axle Shaft Slinger is a genuine Dana Spicer part that press fits on the outer axle shafts of Model 50 IFS, Model 60, and Model 61 open knuckle front drive axles equipped with serviceable front wheel bearings. QU40064 deflects road splash... -
QT1018i 4 Lug Spindle Nut Socket for Dana 50IFS & Dana 60 Front Axles
881018$25.98QT1018i 4x4 Dana 50, Dana 60 Front Axle Large 4 Lug Spindle Nut Socket fits Dana 50 and Dana 60 front axles with 4 slot spindle nuts and serviceable wheel bearings from 1982-1997. Thick wall design, ½" drive socket. Imported. Also available:... -
QU40166 Dana 50, Dana 60 4 Slot Front Inner Spindle Nut with Pin
40166$27.98QU40166 Dana 50, Dana 60 4 Slot Front Inner Spindle Nut with Pin is a genuine Dana Spicer part that fit 1980s and 1990s Dana Spicer Model 50IFS, Model 60, and Model 61 front drive axles using 4 slot, round spindle nuts. USA Made. Also see QU40166U... -
QU40066 Dana 50/60 Outer Axle Shaft to Spindle Thrust Washer
40066$5.98QU40066 Dana 50/60 Outer Axle Shaft to Spindle Thrust Washer is a genuine Dana Spicer part that fits on your outer axle shaft to control thrust between the axle shaft and spindle. USA Made. Need More Info? Use the handy Links below to access over 40... -
QU40065 Large Spindle to Axle Shaft V-Seal Dana 50IFS, Dana 60/61 Axles
40065$8.98QU40065 Large Spindle V-Seal is a genuine Dana Spicer part that fits between the spindle and QU40064 outer axle shaft slinger on Dana Spicer Model 50 IFS, Model 60, and Model 61 open knuckle front drive axles equipped with serviceable front wheel... -
QU40540 Spindle-to-Knuckle Bolt or Stud for Ford
40540$11.98QU40540 Spindle-to-Knuckle Bolt or Stud Six of these press-in special bolts fit each steering knuckle on 1976-1979 Ford F250 Dana 44, plus 1978-1979 and 1985-1991 Ford Dana 60 Front Axles. They are used along with QU95036 Locknut to retain your spindles... -
QT1110i High-Torque, 4 Prong Spindle Nut Wrench
881110$24.98QT1110i Heavy Duty, High-Torque, 4 Lug Spindle Nut Wrench for Dana 50 and Dana 60 Front Axles fits Dana Spicer 50, 60, and 61 front drive axles with 4 slot double spindle nuts (QK4729) and serviceable wheel bearings from 1981-1997. Reinforced,...