Bearings & Seals 1967-1972 GM NP435, NP445

TK50357 Torque King® Rear Output Shaft Needle Roller Bearing for all NP205 Transfer Cases or NP435 4 speed transmission countershafts. TK50357 is an original equipment spec, open end, full complement, Torrington® Needle Bearing that provides...

QA2173 Transmission Gasket and Seal Kit for New Process NP435 4 speed manual transmissions in Ford, Dodge, GM, and IHC trucks. Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily...

QU50539 Timken® Pinion Bearing Cup is used as for the inner pinion bearing cup on many Dana-Spicer Model 27, 30, 44, and 50 axles plus as an outer bearing cup for AAM/GM 9.25" and 9.5" axles. This is a First Class, original equipment quality bearing...

QU51120 Reverse Idler Gear Needle Roller Bearings For New Process NP435 4 Speed Manual Transmissions and other vintage models. QU51120 includes 52 rollers so you need to order two packages for your transmission which has 104 needle rollers supporting the...

QU50540 Timken® Pinion Bearing is used as the Inner Pinion Bearing on many Dana-Spicer Model 27, 30, 44, and 50 axles, and as an Outer Bearing Cup for AAM/GM 9.25" and 9.5" axles. This is a First Class, original equipment quality Bearing that meets...

QU51127 Input Seal for 1964-1972 GM 1/2 Ton to 1 Ton trucks with New Process NP435 and 1948-1967 SM420 Muncie 4 speed manual transmissions.

QU51158 Countershaft Rear Thrust Bearing For New Process NP435 and NP445 4 speed manual transmissions in Chevy, Dodge, Ford, GMC, and IHC trucks.

QU51156 Input to Mainshaft Pilot Needle Roller Bearings For New Process NP435 and NP445 4 speed manual transmissions in Chevy, Dodge, Ford, GMC, and IHC trucks. QU51156 includes 14 loose needle roller bearings enough for one transmission.

QU51093 Deep Groove Type Input or NP435 Output Ball Bearing was used by Dodge for 1988-1991 transmissions and 1948-1967 SM420 4 Speed Manual Transmission. It is dimensionally interchangeable with QU51112. It can handle higher thrust loads due to its deep...

QU51157 Input to 3-4 Synchro Hub Thrust Bearing For New Process NP435 with tapered input bearings and NP445 4 speed manual transmissions in Chevy, Dodge, Ford, GMC, and IHC trucks. Applications:NP435 4 Speed Transmission Input to Mainshaft Thrust...

QU51159 Input Seal for most medium duty trucks with NP435 4 speed manual transmissions.

QU50815 Countershaft Front Bearing for NP435 4 speed manual transmissions. This is a USA Made Part supplied by New Process.