QK6000 Cummins Rear Crankshaft Seal Kit Quickly & easily replace that leaky rear crankshaft seal on your 1989-Current Dodge or Ram Cummins 5.9L or 6.7L Diesel engine without damaging the new seal! No need to remove the flywheel housing or seal adapter! Includes CNC machined aluminum installer tool, guide studs, self tapping screws, drill bit, new Teflon lip seal with plastic seal starter, Threadlocker, anti-seize, and seal adapter centering guide. In addition to setting the seal square and to the correct depth, the installer can be used to press on crankshaft wear sleeves! Made in U.S.A.. Instructions and Torque Specs TSB6000 Cummins Rear Crank Seal Replacement Tech Bulletin are included with every kit.
Just need the tools? See TS6000 Rear Crankshaft Installation Tool Kit.
Already have the Tools? Order QU10556 Crank Seal with pilot and centering rings below.
Need Instructions or Torque Specs? See TSB6000 Cummins Rear Crank Seal Replacement Tech Bulletin. The TSB6000 is now included in every QK6000 kit!
With the QK6000 Kit there is absolutely no need to remove the flywheel housing and rear seal adapter. However if for any reason, you do need to remove the rear seal adapter from the back of the block, we do include a Cummins supplied stamped steel centering ring to center the rear seal adapter. The centering ring is required to center the seal adapter because Cummins did not dowel the seal retainer to the block so it can be installed off center unless you use the line up ring.
The thin plastic disposable Seal Starter is pre-installed in the Seal. The Seal Starter is flared slightly to fit over the end of the crank. Once the Seal is slid over the Starter and onto the crank, remove and discard the Seal Starter.
Our Aluminum Crank Seal Installer will install both replacement seals and QU11101 seals with wear sleeves to the correct depth on Cummins Dodge Ram 5.7L and 6.7L Diesels plus most 4BT and 6BT Diesel engines. This includes Dodge trucks and most industrial, ag, marine, and automotive engines with 4BT and 6BT diesel engines. Our installer does NOT install the rear crank seal on Ford Cummins 5.9L Diesel engines. TS6000 Replaces Cummins crank seal installer tool 3824078.
If you decide you HAVE to remove the rear crank seal adapter/retainer from the back of the Cummins block, be advised it is gasketed to both the back of the block and the top of the oil pan.
4BT and 6BT Diesels
1989-1993 D250, W250, D350, W350 with the 5.9L Cummins Diesel
1994-2007.5 Ram 2500, Ram 3500 with the 5.9L Cummins Diesel
2007.5-up Ram 2500, Ram 3500 with the 6.7L Cummins Diesel
2008-up Ram 4500, Ram 5500 with the 6.7L Cummins Diesel