TK8324 Master Rear Wheel Bearing and Seal Kit for Ram Dana 80 DRW

TK8324 Torque King® Master Rear Wheel Bearing and Seal Kit for 1994-2002 Dodge Ram Dana 80 Dual Rear Wheel Axles features premium Timken® bearings and original equipment quality wheel seals because when it comes to rear wheel bearings and seals, only the best will do to safely support the heavy loads your truck hauls. Kit includes Timken® Inner and outer wheel bearings/bearing cups, inner wheel seals, steel axle shaft flange gaskets, and Threadlocker for the axle shaft flange bolts. This Kit fits 1994 to 2002 Dodge Ram 4x2 and 4x4 3500 series trucks with DUAL Rear Wheel Dana 80 full float Rear Drive Axles.

For a Master Kit with Tools, see TK8307. Also available TK4892 Wheel Bearing Kit only.

Available Spindle Nut Options: (Do Not Reuse Your 1994-2002 Original Spindle Nuts, Below!)
Stock Spindle Nut Kits: QK4008/QK4009
Double Spindle Nut Kit: TK4011/TK4012

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Kit Components
Available Tools
SAFETY NOTE
Applications

Tech Note 1: Kit Components
TK8324 Rear Wheel Bearing Kit Includes These Components:
2 each Timken ® Wheel Bearings/Cups: QU50411, QU50412, QU50377, QU50376
2 Dana Inner Wheel Seals: QU50075
2 Dana 80 Axle Shaft Flange Gasket: QU40078
Plus S24200 Medium strength blue Threadlocker for the axle shaft flange bolts

Tech Note 2: Available Tools
Available Individual Tools:
QT1801 Outer Wheel Bearing Cup Installer
QT1806 Inner Wheel Bearing Cup Installer
QT1538 Inner Wheel Seal Installer
QT1100 1" x 8" Driver Handle OR QT1116 1-1/4" x 8" Driver Handle
QT1009 1/2" Drive Rounded Hex Spindle Nut Socket for Stock Spindle Nuts

Tech Note 3: SAFETY NOTE
Stock Elastic Stop Spindle Nuts and Lock Wedges used on 1994 to 2002 Dodge Ram Dana 80 full floating rear axles are designed to be installed once and only once! For safety reasons, you must discard both the nut and wedge if they are removed from the spindle for any reason. Both parts lose a percentage of their resistance of coming off when they are removed. You may hear of cases where this type of factory nut has come off while the truck was being driven. Invariably, these failures involve nuts and wedges that have been reused or improperly installed. NEVER REUSE FACTORY ELASTIC STOP SPINDLE NUTS or LOCK WEDGES!!!!!

Applications
Dodge:
Ram 3500 series, 4x2 or 4x4 trucks with DUAL Rear Wheel Dana 80 full float rear drive axles: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002