QK1029 NV4500 6 Piece Synchronizer Friction Ring Set

QK1029 NV4500 6 Piece NVG Premium Synchronizer Friction Ring Set for NV4500 Transmissions with synchronized reverse gear. QK1029 Premium 6 Piece Original Equipment Type New Venture 4500 Synchronizer Ring Kit includes 6 smooth shifting, original equipment type carbon fiber lined friction rings. Fits all 1992-2005 Dodge and 1999-2007 GM NV4500 transmissions. Assembled in USA with USA made and imported parts.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Includes
Oil
Synchro Rings
Tech Help
Matching Parts
Lubricants, Sealants, Threadlockers
NV4500 Tools
Applications

Tech Note 1: Includes
QK1029 6 Piece Synchro Ring Kit is for New Venture NV4500 5 speed manual transmissions with a synchronized reverse gear. All Dodge and 1999-2007 GM models have a synchronized reverse gear. 1992-1998 GM units have an unsynchronized reverse gear and use 5 piece Kit QK1030. QK1029 includes these original equipment type NV4500 Synchro Rings:
(2) QU10004 3-4 Rings
(2) QU10002 1-2 Center Friction Rings
(2) QU10003 5th Gear Ring

Tech Note 2: Oil
Typically, NV4500 transmissions with stock type synchronizer rings are easy to shift, with a smooth positive feel. This is largely due to the advanced carbon fiber coatings on the rings and the use of compatible lubricants like Castrol Syntorq LT® or QU90020 NV4500 Manual Transmission 75w85w GL-4 synthetic gear lubricants. If you are experiencing shift difficulties with your NV4500, the most likely causes are: wrong or dirty lubricant, clutch issues, excessive mainshaft bearing end-play, or aftermarket brass synchro rings were installed when the transmission was rebuilt. Sometimes, changing the oil will help, but typically, by the time you get around to fixing the problem, the damage is already done.

Tech Note 3: Synchro Rings
The New Venture NV4500 5 speed transmission uses a triple cone synchronizer design for 1st and 2nd gears. It is advisable, but not required you replace QU10014 Inner Steel Rings and QU10015 Outer Steel Rings at the same time you replace QU10002 Center Friction Rings. To reuse QU10014 and QU10015 Rings, the condition of the friction surfaces on those rings must be good. If the polished steel finish is pitted, scored, or heat discolored (bluish color), you should replace them.

Tech Note 4: Tech Help
Soak your synchronizer rings in QU90020 75w85w GL-4 Synthetic Manual Transmission Fluid for New Venture NV4500 transmissions. For more information on rebuilding your NV4500 transmission, order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.

Tech Note 5: Matching Parts
Other Matching Parts for QK1029 Synchronizer Ring Kit:
QU10014 Inner Steel 1-2 Ring
QU10015 Outer Steel 1-2 Ring
QU10038 1-2 Synchro Hub
QU10081 1-2 Synchro Slider
QK1100 1-2 Synchro Strut Kit
QK1103 Snap Ring Kit, 1-2 Synchro
QU10075 39 Tooth Mainshaft 1st Gear
QU10035 37 Tooth Mainshaft 2nd Gear
QU10203 6.22" Diameter 5th Gear 1992-2005 Dodge, 1995-2007 GM
QU10729 6.46" Diameter 5th Gear 1992-1994 GM
QK1099 Synchro Strut Set use for 3-4-5-R
QU10039 5th Gear Synchronizer Sleeve or Slider
QU10202 5th Gear Clutch
QU10122 3-4 Synchro Hub
QU10021 or QU10206 3-4 Synchronizer Sliding Sleeve
QU10732 3-4 Synchronizer Assembly
QU10049 or QU10702 4th Gear Clutch
QU10099 28 Tooth Mainshaft 3rd Gear 1992-1994 GM
QU10201 29 Tooth Mainshaft 3rd Gear 1992-2005 Dodge, 1995-2007 GM
QU90020 NV4500 Manual Transmission Oil
TM1003 NV4500 Shop Manual
V1003DVD NV4500 Overhaul Video

Tech Note 6: Lubricants, Sealants, Threadlockers
Early production NV4500 Transmissions used an anaerobic sealant (QU90003) to seal between the main case and input bearing retainer, top cover, and rear housing. Mid-production units used anaerobic sealant just on the input retainer and RTV for everything else. Later production transmissions used black RTV Sealant (QU90006 or QU90005) for everything. Either type of sealant works fine (except the PTO covers ALWAYS should be sealed with RTV), but I prefer RTV for all components. Regardless of which sealant you use, make sure excess sealant does not block the lube access hole at the top of input retainer pilot that fits into the transmission case! Also, the threaded holes in the main case for the four retainer bolts and 12 PTO bolts are open ended, so you must use new bolts with factory applied threadlocker or apply Threadlocker (S24200) to your existing bolts to prevent oil seepage past the bolt threads. See my TM1003 NV4500 Shop Manual or VSG1003DVD NV4500 Overhaul Video for more information.

Lubricant and Chemical List for NV4500 Transmissions:
QU90020 NV4500 Manual Transmission Oil
QU90003 Anaerobic Sealant
QU90006 3.35 oz Ultra Black RTV Sealant
QU90005 0.5 oz Ultra Black RTV Sealant
S24200 6ml Medium Strength Blue Threadlocker
S9978 1 gram Medium Strength Blue Threadlocker
S9979 1 gram High Strength Red Threadlocker
S24026 High Temperature Threadlocker for Mainshaft Nut

Tech Note 7: NV4500 Tools
Need Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.

You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.

Applications

Chevy and GMC:
New Venture NV4500 5 Speed Manual Transmissions: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

Dodge:
New Venture NV4500 5 Speed Manual Transmissions: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005