Description
**This part has superseded to TK10513**
QU50125 32 Spline Rubber Yoke Seal for 32 Spline Front Output CV Flange Yokes is approximately 0.130" -0.140" thick with 32 splines and is the best fit for most NP205 32 spline front output shafts with CV flanges or yokes that use a one piece nut and washer. USA Made.
Superseded by TK10513
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Alternative Seal
Applications
Tech Note 1: Alternative Seal
New Process lists TK10513 0.182" thick Spline Seal for all 32 spline NP205 front output applications. However, we have found this 0.182" Seal is too thick for most CV front output flanges and yokes that are retained by the factory flanged nut (TK10512). Friction from the nut as it is tightened will often cause the Spline Seal to get squeezed between the nut and CV flange/yoke instead of compressing into the yoke. We have found 0.130"-0.140" thick QU50125 Spline Seal shown here or two stacked QU50666 0.070" thick seals will compress into the yoke bore without being squeezed out.
Applications:
New Process NP205 Transfer Case 32 Spline Front Output Shafts with CV Flanges or Yokes that use a one piece nut and washer
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
