Description
QU40902 NV4500 Transmission 1410 Series Rear Output Yoke is an original equipment replacement Rear Output Yoke for 1992-2002 GM GMT-455 and C3500HD models using 4x2 New Venture NV4500 5 speed manual transmissions equipped with cast iron tailshaft housings and a transmission mounted parking brake.
Also see QU51179 Replacement Yoke for Conversion Applications
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Product Note
U-Joint Specs
NV4500 Tools
Matching Parts
Applications
Tech Note 1: Product Note
We have been unable to find the correct u-joint strap and bolt kit for QU40902 yoke. The center to center bolt hole dimension is about 1-7/8" instead of 1-21/32" that is typical for a 1410 series u-joint. Customers that have purchased this yoke have either made new straps or modified the straps from QU40814 Kit and supplied their own 5/16" SAE short shoulder, socket head bolts.
Tech Note 2: U-Joints Specs
QU40902 is made to accept universal joints made to Spicer 1410 series dimensional specifications. U-Joint cup diameter is 1-3/16". Overall width of installed universal joint is 4-3/16". Use with TK40705 or QU40789 universal joints.
Tech Note 3: NV4500 Tools
Need Exploded Views, Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.
You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.
TOOLS for SPECIFIC NV4500 MODELS |
||||||
| Component | 23 Spline Dodge 4x4 NV4500LD |
29 Spline Dodge 4x4 NV4500HD |
30 Spline Dodge 4x2 NV4500LD |
31 Spline Dodge 4x2 NV4500HD |
32 Spline GM 4x4 |
35 Spline GM 4x2 |
| Mainshaft Nut | QT2002 | QT2001 QT2036 |
QT2002 | QT2001 QT2036 |
QT2002 QT2028 |
1-1/2" Hex Socket |
| Mainshaft Holding | NLA | QT2000 | NLA | QT2011 | N/A | N/A |
| 5th Gear Nut Torx® Cross Bolt |
N/A | QT9205 | N/A | QT9205 | N/A | N/A |
| Output Seal Installer | N/A | QT1801 | N/A | QT2058 CALL |
Not Used | Not Used |
| Tailshaft Bushing Remover and Installer | Not Used | Not Used | Not Used | QT2044 | Not Used | Not Used |
TOOLS For ALL NV4500 MODELS |
||||||
| Countershaft Front Bearing Cup Installer |
QT1802 | Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal | ||||
| Countershaft Front Bearing Installer | QT2004 | Can also use to press 3-4 Synchro Hub on original equipment mainshafts | ||||
| Input Bearing & Countershaft Rear Bearing Installer | QT2005 | Can also use to install Input Seal | ||||
| Input Bearing Cup Installer | QT1801 | Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle. | ||||
| Countershaft Support | QT2006 | Use to support front of countersahft when installing countershaft rear bearing | ||||
| 1-2 Synchronizer Support | QT2008 | Use to support 1-2 synchronizer hub during synchronizer assembly | ||||
| 10mm 1/2" Drive 12 Point Socket | QT1020 | USA Made Impact Socket for Factory Tailshaft Housing Bolts | ||||
| Long Shank Punch for Shift Lug | QT9300 | 3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin | ||||
Tech Note 4: Matching Parts
Matching Parts for QU40902 Yoke:
QU50204 Oil Seal
QU30009 Spline Seal
QU10181 Yoke Nut
QU30095 Yoke Flat Washer
QU50155 Rear Output Needle Bearing
QU10319 Snap Ring, Rear Output Needle Bearing
QU10217 Cast Iron Rear Output Housing
Applications
Chevy and GMC:
C3500HD with NV4500 5 Speed transmission and mounted parking brake: 1992-2002
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
