QU40472 Transfer Case Rear Output Slip Yoke 1994-1997 Ram NP241

QU40472 Transfer Case Rear Output Slip Yoke is a genuine original equipment part for coupling your rear driveshaft to New Process NP241DLD and early NP241DHD transfer cases with 32 spline rear output shafts in 1994-1997 Dodge Ram 4x4 trucks. This slip yoke replaces production yokes with (QU40498) or without vibration dampers. Matching universal joint is TK40705. Matching Rear Output Seal is QU10610, Matching Support Bushing is QU10130. USA Made.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Lubricate
Tech Help
U-Joint Specs
31 or 32 Spline
Matching Parts for 1994-1996.5 NP241DHD
Matching Parts for 1994-1997 NP241DLD
Applications

Tech Note 1: Lubricate
Lubricate the seal lip and yoke shaft with clean grease or petroleum jelly to provide initial lubrication.

Tech Note 2: Tech Help
More driveshaft yokes are wrecked by slam-bang methods of u-joint replacement than by any other cause. Refer to TM3000 Driveshaft and Universal Joint Manual or TSB3502 External Snap Ring Single-Cardan U-Joint Service.

Tech Note 3: U-Joint Specs
This 32 spline transfer case rear output yoke takes universal joints made to Spicer 1410 series dimensional specifications. The u-joint cup diameter is 1-3/16", the overall u-joint width must be 4-3/16".

Tech Note 4: 31 or 32 Spline
This Slip Yoke has one double width spline so it will fit shafts made with 32 narrow splines or shafts with 31 narrow splines and one double width spline (what is called a 31 spline based on 32 spline).

Tech Note 5: Matching Parts for 1994-1996.5 NP241DHD
Exploded View XV4000 1994-1996.5 Dodge Ram NP241DHD Transfer Case
QU11138 Case and Extension Bolt
QU50344 Rear Case Half
QU50423 Oil Pump
QU10873 Speedo Gear Retaining Snap Ring
QU10923 13-Tooth Speedo Drive Gear
QU50207 Rear Output Bearing
QU50502 Front Output Rear Needle Bearing
QU11044 Drain or Fill Plug
QU11140 Long Case Bolt
QU50419 Rear Output Bearing Retainer
QU50875 Rear Output Ball Bearing
QU10816 Snap Ring
QU11054 Rear Extension Assembly
QU10130 Rear Output Bushing
QU10610 Booted Rear Output Seal
QU11141 Extension Housing Bolt
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 3-1/4 Quarts to Fill

Tech Note 6: Matching Parts for 1994-1997 NP241DLD
Exploded View XV4002 1994-1997 Dodge Ram NP241DLD Transfer Case
QU11138 Case or Extension Housing Bolt
QU50344 Rear Case Half
QU50423 Oil Pump
TK10586 Rear Housing Shim Gasket, 1997
QU50502 Front Output Rear Needle Bearing
QU10873 Speedo Gear Retaining Snap Ring
QU10923 13-Tooth Speedo Drive Gear
QU11044 Fill or Drain Plug
QU10939 Fill or Drain Plug (Some 1997)
QU11140 Long Case Bolt
QU50419 Rear Bearing Housing
QU11141 Rear Bearing Housing Bolt
QU50875 Ball Bearing
QU10816 Snap Ring
QU11054 Rear Extension Assembly
QU10130 Rear Output Bushing
QU10610 Booted Rear Output Seal
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 2.31 Quarts to Fill

Applications
Dodge Ram:
Ram 2500 4x4 trucks with New Process NP241DLD Transfer Cases: 1994, 1995, 1996, 1997
Ram 2500 and Ram 3500 4x4 Trucks with New Process NP241DHD Transfer Cases with 32 spline rear output shafts: 1994, 1995, most 1996 (Transfer Case Assembly Numbers with "5209" Prefix)