QU40321 Small Spindle Axle Shaft Bushing (1-1/4"ID)

QU40321 Small Spindle Axle Shaft Bushing (1-1/4” ID) for Dana Spicer Closed Knuckle Axles is a flanged Bronze Bushing that is found inside the spindles of Dana Spicer Model 25, Model 27, Model 30, and Model 44 closed knuckle front axles in 1941 to 1973 Jeeps and 1961 to 1971 International Scouts, QU40025 supports the outer axle shaft and controls axial thrust. Order 2 Bushings per vehicle.

QU40321U Used Small Spindle Axle Shaft Bushing for Dana Spicer Closed Knuckle Axles while supplies last.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Worn Bushings?
Before Installing
Size
Applications

Tech Note 1: Worn Bushings?
Both the inside diameter and thrust face of the Bushings are subject to wear. Replace any installed bushing that is a loose fit to the axle shaft, that has visible wear, or is not a press-fit in the spindle. Worn out Bushings will cause the axle shaft to hit the King Pins.

Tech Note 2: Before Installing
Pre-Lube the inside of the bushing with some clean grease before installing the spindle to provide initial lubrication.

Tech Note 3: Size
QU40321 has a nominal inside diameter of 1-1/4”.

Applications:
IHC:
Scout: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970
Scout II, Scout Terra, Scout Traveler: 1971, 1872, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980

Jeep:
Dana 25, Dana 27, Dana 30, and Dana 44 closed knuckle front axles: 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973
International Scouts with Dana 25, Dana 27, Dana 30, and Dana 44 closed knuckle front axles: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971