Description
QU40174 Dana 50/60 Original Equipment Nongreaseable Ball Joint Set for Ford Mono Beam Axles services one side of the Dana 50 or Dana 60 4x4 front axle in your 1999-2004 Super Duty F250, F350, F450, F550, or 2000-2005 Ford Excursion. Also fits 1992-1997 Ford Dana 60 F350. Set includes genuine Dana-Spicer original equipment replacement Upper Ball Joint, Lower Ball Joint, and Ball Joint Hardware. A quality Ball Joint Set that typically lasts for years under most conditions. Works on trucks with either single or dual rear wheels. Ball Joints Made in Canada, small parts Made in U.S.A.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes:
Ford F-350
Ball Joint Press Set
Applications
Tech Note 1: Ford F-350
For the F-350 Dana 60 Front Axle, Ford switched from King Pins to Ball Joints starting with the 1992 Model Year. Ball Joints are a wear item that will require replacement sooner or later. Here in Montana, the factory Ball Joints had an average life of somewhere between 7-10 years in ranch and contractor vehicles. Not bad, but nowhere near the life expectancy of the King Pin parts the earlier trucks used.
Tech Note 2: Ball Joint Press Set
Using our TS4511 Ball Joint Press Set is the easiest and safest way to press out your old Ball Joints and install the new ones but it is not the only way. Other methods can be used, but you have to be careful for safety reasons and to prevent breaking your steering knuckles.
Applications:
Ford:
F-350 4x4: 1992, 1993, 1994, 1995, 1996, 1997
F-250, F-350, F-450, F-550: 1999, 2000, 2001, 2002, 2003, 2004
Excursion: 2000, 2001, 2002, 2003, 2004, 2005
Warranty
Product Reviews
Delivery & Returns
Shipping times are estimated in your cart.
More info can be found at the link below.
