S24026 6 ml Tube Permatex High Strength Threadlocker Gel

S24026 6 ml Tube Permatex High Strength Threadlocker Gel is perfect for those bigger jobs requiring a high level of fastener retention. OEM specified. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S- 46163A, Type I, Grade K)

For smaller jobs, see: S9979 High Strength Threadlocker Packet.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Threadlocker and Anti-Seize, When to Use
Directions
Parts Not Clean?
California Proposition 65
Safety Data Sheets
Applications

Tech Note 1: Threadlocker and Anti-Seize, When to Use
Shop manuals may or may not specify the use of a Threadlocking compound. Most older manuals do not make any reference to any thread treatment, but most recent ones do. With the exception of wheel lug nuts, most threaded fasteners used in automotive drivetrains could be candidates for either a Threadlocker or anti-seize compound. If your service manual gives no guidance, you need to base your decision on both environmental conditions (corrosive and/or wet) and the consequences that may occur if a fastener backs off. As a basic rule, I apply Threadlocker to most fasteners such as spindle bolts that could cause severe consequences if they loosened up. For things like crossmember bolts that usually do not come loose, but are subject to corrosion, I use anti-seize..

Tech Note 2: Directions
1. Clean and dry parts using Permatex^® Surface Prep^™ activator, 24163
2. Shake tube of High Strength Threadlocker well before each use.
3. Open tube.
4. Apply to threaded areas and assemble parts.

Tech Note 3: Parts Not Clean?
Sometimes threads can't be cleaned of oil residue or other contaminants. For these applications, consider a Surface Insensitive Threadlocker.

Tech Note 4: California Proposition 65
This product does not contain any Proposition 65 chemicals.
source: MSDS Version 2; Revision Date 23-Mar-2016.

Tech Note 5: Safety Data Sheets
SDS.

Applications:
Universal