QU10857 Transfer Case Input Seal for Many NPG and NVG Transfer Cases

QU10857 Genuine New Process/New Venture Input Seal for 1989-2002 Dodge and 1991-2006 Jeep fits New Process and New Venture chain drive transfer cases in many 1989-2006 Dodge and 1991-2006 Jeep 4x4 applications with 50mm outside diameter Input Shafts. QU10857 features raised rubber outer sealing ring to seal against retainer chamfer and high-temp resistant Viton seal lip with outer wiper. This genuine New Process part is Made in Taiwan.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Seal Lubrication
Seal Features
Matching Input Shafts for 1994-2002 Dodge NP241 Series
Matching Parts for 1994-2002 Dodge NP241DHD
Matching Parts for 1994-2002 Dodge NP241DLD
Matching Parts-Saved for Future Use
Matching Parts-Saved for Future Use
Applications

Tech Note 1: Seal Lubrication 
These seals come with the seal lip pregreased from the factory. Seals of this type ALWAYS need to be pre-lubricated before they are put in service. If you drop the seal on the ground and the factory grease gets dirty, you must carefully clean off the contaminated lubricant and replace it with fresh clean grease.

Tech Note 2: Seal Features
QU10857 has a viton seal lip that can withstand higher operating temperatures without failing compared to conventional seals. QU10857 is intended for applications that have a separate transmission output seal. If you have an older application that requires a 2-way seal, order TK10517. Install QU10857 so the open side of the seal with the visible garter spring is towards the inside of the transfer case.

Tech Note 3: Matching Input Shafts for 1994-2002 Dodge NP241 Series
QU50501 Input Bearing Retainer
QU10179 1999.5-2002 Ram 23 Spline x 4-5/16" Transfer Case Input Shaft for Auto Transmission
QU10699 1994-1999.5 Ram 29 Spline Transfer Case Input Shaft for Narrow Bearing
QU10889 1999.5-2002 Ram 29 Spline Transfer Case Input Shaft for Wide Bearing
QU50638 1994-1999 Ram 23 Spline x 5-3/64" Input Shaft for Gas V8/Manual Transmission
QU50477 Replacement 29 Spline Input Shaft

Tech Note 4: Matching Parts for 1994-2002 Dodge NP241DHD
Exploded View XV4000 1994-1996.5 Dodge Ram NP241DHD Transfer Case
Exploded View XV4001 1996.5-1997 Dodge Ram NP241DHD Transfer Case
Exploded View XV4003 1998-2002 Dodge Ram NP241DHD Transfer Case
QU10569 Switch (with CAD)
QU11050 Switch (no CAD)
QU10800 O-Ring
QU70005 PTO Cover
QU52264 Front Retainer Bolt
QU50501 Input Bearing Retainer
QU10535 Nut
QU10971 Mounting Stud
QU10893 Input Shaft Snap Ring
QU11143 Front Case Half
QU10899 Annulus Gear Snap Ring
QU11092 Breather Vent
QU11488 Spring Hose Clamp
QU10801 Front Output Seal with Wiper
QU50875 Ball Bearing
QU10874 Snap Ring, Front Output Shaft Bearing to Front Case
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 3-1/4 Quarts to Fill

Tech Note 5: Matching Parts for 1994-2002 Dodge NP241DLD
Exploded View XV4002 1994-1997 Dodge Ram NP241DLD Transfer Case
Exploded View XV4004 1998-2002 Dodge Ram NP241DLD Transfer Case
QU10893 Input Shaft Snap Ring
QU50874 5/8" Wide Input Bearing
QU50873 15/16" Wide Input Bearing
QU10814 Input Shaft to Planetary Snap Ring
QU11039 Planetary Lock or Thrust Plate
QU10572 Input Shaft to Planetary Thrust Washer
QU50114/X10000 Pilot Bearings
QU50153 6 Pinion Planetary Carrier
QU50152 Range Sleeve, 2-way Input Teeth
QU50898 Range Sleeve, 1-way Input Teeth
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 2.31 Quarts to Fill

Tech Note 6: Matching Parts
Saved for Future Use

Tech Note 7: Matching Parts
Saved for Future Use

Applications
(Partial Listing)

Chevy/GM:
NP241C Transfer Cases

Dodge:
Dakota with NP231D Series Transfer Cases : 1989, 1990, 1991, 1992, 1993,1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Dakota with NP242D Transfer Case: 1998, 1999, 2000
Durango with NP231D or NP242D Transfer Cases: 1998, 1999, 2000
Ram 1500 with NP241DHD Transfer Case: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Ram 2500, Ram 3500 with NP241DLD and NP241DHD Transfer Cases: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002

Jeep:
Cherokee XJ with NP231J Transfer Case: 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Cherokee XJ with NP242J Transfer Case: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Comanche with NP231J Transfer Case: 1991, 1992
Grand Cherokee ZJ with NP231J, NP242J, NP249J Transfer Cases: 1993,1994, 1995, 1996, 1997, 1998
Wrangler YJ with NP231J Transfer Case: 1991, 1992, 1994, 1995, 1996
Wrangler TJ with NP231J Transfer Case: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Wrangler Rubicon TJ with NP241J Transfer Case: 2003, 2004, 2005, 2006