null

QU10610 New Process NP241 Booted Rear Output Seal for 32 Spline Rear Outputs

New Venture-MPT
No reviews yet Write a Review
$21.98
SKU:
10610
UPC:
198345390730
Condition:
New
Shipping:
Calculated at Checkout
In Stock & Ready To Ship!
Availability: Stocking Item-Usually ships within 1-2 business days
Current Stock:Only left:

Description

QU10610 New Process NP241 Booted Rear Output Seal for 32 spline rear output shafts is a genuine USA made New Process part for all 1994.5-1999 GM New Process NP241 Left Drop Transfer Cases and 1994-2002 Dodge New Process NP241DLD Transfer Cases. Also fits 1994-1996.5 Dodge New Process NP241DHD transfer cases with a slip yoke that is approximately 1-7/8" in diameter. Integral boot protects the oil seal from road debris. Boot has a weep hole that should point towards ground on an installed seal. USA Made.

Dodge Product Note: Most 1996 NP241DHD Transfer Cases had two-piece tailshaft housings, a small 32 spline output shaft and use QU10610 Seal. Most 1997 and all 1998-2002 NP241DHD Transfer Cases have a 31 spline output shaft, one piece tailshaft housings, and use QU10896 seal.

Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!

Dan the Gear Man® Tech Notes:
Pre-Lubed
Matching Parts for 1994.5-1999 Chevy/GMC NP241
Matching Parts for 1994-1996.5 Dodge NP241DHD
Matching Parts for 1994-1997 Dodge NP241DLD
Matching Parts for 1998-2002 Dodge NP241DLD
Applications

Tech Note 1: Pre-Lubed
These seals come with pre-lubricated seal lips. If the grease gets contaminated before installation, clean it off and replace with fresh grease. The grease provides initial lubrication until oil splashes against the inside of the seal when driving.

Tech Note 2: Matching Parts for 1994.5-1999 Chevy/GMC NP241
Exploded View XV4031 1996-1999 Chevy/GMC NP241 Transfer Case
QU50344 Rear Case Half
QU50423 Oil Pump
QU10873 Speedo Gear Retaining Snap Ring
QU10130 Rear Output Bushing
QU11141 Extension Housing Bolt
QU11054 Rear Extension Assembly

Tech Note 3: Matching Parts for 1994-1996.5 Dodge NP241DHD
Exploded View XV4000 1994-1996.5 Dodge Ram NP241DHD Transfer Case
QU11138 Case and Extension Bolt
QU50344 Rear Case Half
QU50423 Oil Pump
QU10873 Speedo Gear Retaining Snap Ring
QU10923 13-Tooth Speedo Drive Gear
QU50207 Rear Output Bearing
QU50502 Front Output Rear Needle Bearing
QU11044 Drain or Fill Plug
QU11140 Long Case Bolt
QU50419 Rear Output Bearing Retainer
QU50875 Rear Output Ball Bearing
QU10816 Snap Ring
QU11054 Rear Extension Assembly
QU10130 Rear Output Bushing
QU11141 Extension Housing Bolt
QU40472 Rear Output Slip Yoke
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 3-1/4 Quarts to Fill

Tech Note 4: Matching Parts for 1994-1997 Dodge NP241DLD
Exploded View XV4002 1994-1997 Dodge Ram NP241DLD Transfer Case
QU11138 Case or Extension Housing Bolt
QU50344 Rear Case Half
QU50423 Oil Pump
TK10586 Rear Housing Shim Gasket, 1997
QU50502 Front Output Rear Needle Bearing
QU10873 Speedo Gear Retaining Snap Ring
QU10923 13-Tooth Speedo Drive Gear
QU11044 Fill or Drain Plug
QU10939 Fill or Drain Plug (Some 1997)
QU11140 Long Case Bolt
QU50419 Rear Bearing Housing
QU11141 Rear Bearing Housing Bolt
QU50875 Ball Bearing
QU10816 Snap Ring
QU11054 Rear Extension Assembly
QU10130 Rear Output Bushing
QU40472 Rear Output Slip Yoke
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 2.31 Quarts to Fill

Tech Note 5: Matching Parts for 1998-2002 Dodge NP241DLD
Exploded View XV4004 1998-2002 Dodge Ram NP241DLD Transfer Case
QU50344 Rear Case Half
QU11138 Case or Extension Housing Bolt
QU50423 Oil Pump
TK10586 Rear Housing Shim Gasket
QU50502 Front Output Rear Needle Bearing
QU10939 Fill or Drain Plug
QU11140 Long Case Bolt
QU11049 Rear Bearing Housing
QU11141 Rear Bearing Housing Bolt
QU50875 Ball Bearing
QU10816 Snap Ring
QU11054 Rear Extension Assembly
QU10130 Rear Output Bushing
QU40813 Rear Output Slip Yoke
Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 2.31 Quarts to Fill

Applications

Chevy/GMC:
NP241 Left Drop Transfer Case: 1994.5, 1995, 1996, 1997, 1998, 1999

Dodge:
Ram 2500 with New Process 241DLD Transfer Case: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
NP241DHD with 1-7/8" slip yoke: 1994, 1995, 1996.5

Warranty

Tools, New Parts, and Torque King® products in a kit or sold individually are warranted to the original purchaser to be free from defects in materials and workmanship for a period of one year from the date of sale. Certain Products, such as Warn® Hubs may be covered by additional manufacturer's warranties. THERE ARE NO OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE EXCLUSIVE REMEDIES FOR A WARRANTY CLAIM HEREUNDER IS RETURN OF THE GOODS TO TORQUE KING 4X4 FOR REPAIR, REPLACEMENT, OR REPAYMENT OF THE PURCHASE PRICE. ALL CLAIMS FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES ARE HEREBY EXCLUDED FROM THIS LIMITED WARRANTY.

Product Reviews

No reviews yet Write a Review

Delivery & Returns

Shipping times are estimated in your cart.

 

More info can be found at the link below.