{"title":"Wheel Hubs 1980-1996 Ford F150 and Bronco Dana 44IFS Front","description":"\u003cp\u003eShop now for Wheel Hubs for 1980-1996 Ford F150 and Bronco with Dana 44IFS front axles.\u003c\/p\u003e","products":[{"product_id":"20026-qu20026-hublock-retaining-clip-for-1987-1988-ford-bronco-f150","title":"QU20026 Hublock Retaining Clip for 1987-1988 Ford Bronco, F150","description":"\u003cp\u003e\u003cstrong\u003eQU20026 1987-1988 Ford Bronco, F150 Hublock Retaining Clip\u003c\/strong\u003e for 1987-1988 Ford Bronco and F150 with flange mount Auto or Manual hublocks. These clips hold your flange type hublock against the wheel hub when you remove the wheels so that sealing o-ring between the hublock and wheel hub will maintain in contact with both. Flanged or Top Hat type external mount Hublocks are exclusive to 1987 and 1988 model year trucks with \"pancake\" wheel hubs that have two closely spaced wheel bearings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUse\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eHublock\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003e1987-1988\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse\u003c\/strong\u003e\u003cbr\u003eUse three to five QU20026 Clips for each Hublock.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHublock\u003c\/strong\u003e\u003cbr\u003eIf you need to remove a hublock, your QU20026 Clips will usually have to be replaced. These clips a vital for keeping the hublock o-ring in place and in full contact with the hublock and wheel hub anytime the wheel is off. I saw a lot of wrecked wheel bearings and rusted up hublocks on these vehicles. The cause was almost always the clips were missing allowing the o-ring to move out of place during tire rotation or brake service. This would allow water and crud to enter and BINGO you have expensive problems.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1987-1988\u003c\/strong\u003e\u003cbr\u003eFord only used the pancake wheel hub\/flanged hublock setup on the Bronco and F150 on many 1987 and 1988 model year 4x4s. This was an upsized version of what the small 4x4 Ranger Pickup and Bronco II used. As you can expect, many front end parts specific to these two years are getting pretty hard to find. Keeping the hublock o-ring in place is essential to keeping prolonging the life of these vehicles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003eFord:\u003c\/strong\u003e \u003cbr\u003eBronco and F150 with Pancake Type Wheel Hub: 1987, 1988\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656775245901,"sku":"20026","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20026_2__94256_8240__92423.1707850983.1280.1280.jpg?v=1742501731"},{"product_id":"20348-qu20348-new-splined-front-disc-brake-wheel-hub","title":"QU20348 New Splined Front Disc Brake Wheel Hub","description":"\u003cp\u003e\u003cstrong\u003eQU20348 1976-1992 F150, Bronco Splined Front Disc Brake Wheel Hub \u003c\/strong\u003e is a brand new internally splined front wheel hub with studs and factory installed wheel bearing cups that fits all 1976-1986, most 1987-1988 and all 1989-1992 Ford F100, F150 and full size Bronco 4x4s. \u003cbr\u003e\u003cbr\u003eAlso see \u003ca href=\"\/products\/21069-qu21069-hub-brake-rotor-assembly-for-1976-1993-f100-f150-bronco\"\u003eQU21069\u003c\/a\u003e Hub and Rotor Assembly.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003e1987-1988\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eIncludes\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#safety\"\u003eNever Reuse Wheel Bolts\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eUse New Bearings with New Bearing Cups\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eAfter Assembly\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1987-1988\u003c\/strong\u003e\u003cbr\u003eFor the 1987 and 1988 model year vehicles built to March 1988 (on some models to May 1988), Ford Broncos and F150 4x4s with factory manual hubs have a unique, one piece \"pancake\" hub\/rotor with two large diameter, close set wheel bearings. The lockout hub is a flange mount type that fits over the wheel studs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003eQU20348 includes:\u003cbr\u003e5 Bolt Wheel Hub\u003cbr\u003e5 Wheel Bolts\u003cbr\u003eInner and Outer Wheel Bearing Cups\u003c\/p\u003e \u003cp\u003e\u003ca name=\"safety\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eSafety Notes:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNever Reuse Wheel Bolts\u003c\/strong\u003e\u003cbr\u003eFor safety reasons, never reuse wheel bolts (studs). New wheel bolts are included with this Kit.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse New Bearings with New Bearing Cups\u003c\/strong\u003e\u003cbr\u003eA used bearing should not be mated to a new bearing cup. For maximum wheel bearing life, it is imperative that new wheel bearings be used with the factory installed bearing cups in your new wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAfter Assembly\u003c\/strong\u003e\u003cbr\u003eIt is relatively unusual for a big 4x4 brake rotor to have less than the maximum allowable runout and rotor thickness variation once it is assembled to a wheel hub. This is due to manufacturing tolerances of the parts and the pressures exerted on the hub and rotor when pressing in the wheel studs. After assembling your brake rotor to the new hub, the rotor should be checked for thickness variation (0.001\" {0.025 mm} maximum) and runout (0.005\" {0.127 mm} maximum with 0.003\" or less preferred). A rotor that is out of tolerance should be machined with an on-the-vehicle brake lathe if possible or on an accurate bench type brake lathe.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching parts and tools for QU20348 Hub are:\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU90001 \u003c\/a\u003eWheel Seal \u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken® Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50578-qu50578-timken-tapered-wheel-or-diff-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50578 \u003c\/a\u003eTimken® Inner Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Round Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4770 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Tanged Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/40106-qu40106-ratchet-type-spindle-nut-for-1985-1992-ford-dana-44ifs\" rel=\"noopener\" target=\"_blank\"\u003eQU40106 \u003c\/a\u003eRatchet Type Spindle Nut (1985-1992)\u003cbr\u003e\u003ca href=\"\/products\/40192-qu40192-front-spindle-kit-for-1976-1979-ford-dana-44\" rel=\"noopener\" target=\"_blank\"\u003eQU40192 \u003c\/a\u003eSpindle for 1976-1979\u003cbr\u003e\u003ca href=\"\/products\/40309-qu40309-spindle-for-1980-1992-dana-44ifs\" rel=\"noopener\" target=\"_blank\"\u003eQU40309 \u003c\/a\u003eSpindle for 1980-1992 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" rel=\"noopener\" target=\"_blank\"\u003eQU56018 \u003c\/a\u003eWarn Manual Lockout Hub Set \u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" rel=\"noopener\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" rel=\"noopener\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/QU40657U Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40427 \u003c\/a\u003eChrome Hub Cap for use with Splined Hub Gear\u003cbr\u003e\u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQT1012i \u003c\/a\u003e4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003eProtection Plus Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/1504-qt1504-dana-30-dana-44-and-gm-10-bolt-front-wheel-seal-installer\" rel=\"noopener\" target=\"_blank\"\u003eQT1504 \u003c\/a\u003eWheel Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003eBronco, F100, F150: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eBronco, F150 with Axle Tag Numbers 610268 or 610310: 1988\u003cbr\u003eBronco and F150: 1989, 1990, 1991, 1992\u003cbr\u003e\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657217515597,"sku":"20348","price":124.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20348_0662_1600__80360_19747__02804.1707872972.1280.1280.png?v=1742518953"},{"product_id":"20349-qu20349-front-wheel-hub-with-studs-for-1993-1995-5-bronco-f150","title":"QU20349 Front Wheel Hub with Studs for 1993-1995.5 Bronco, F150","description":"\u003cp\u003e\u003cstrong\u003eQU20349 New Front Wheel Hub with Studs\u003c\/strong\u003e for 1993-1995.5 Ford Bronco and F150 built before May 1, 1995.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657217974349,"sku":"20349","price":128.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20349_clean__39255_8493__60900.1707873003.1280.1280.jpg?v=1742518966"},{"product_id":"20350-qu20350-new-front-hub-with-studs-for-1995-1996-ford-f150-bronco","title":"QU20350 New Front Hub with Studs for 1995-1996 Ford F150, Bronco","description":"\u003cp\u003eThis part has superseded to QU20621 Hub and Rotor\u003c\/p\u003e \u003cdiv class=\"col-md-8\"\u003e \u003cp\u003e\u003cstrong\u003eQU20350 New Front Hub with Studs \u003c\/strong\u003efor 1995 and 1996 Ford F150 and Full Size Bronco.\u003c\/p\u003e \u003cp\u003eAlso See: QU20350U Used Front Hub for 1995 and 1996 Ford F150 and full size Bronco available while supplies last\u003c\/p\u003e \u003c\/div\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657218302029,"sku":"20350","price":128.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/3505241514232084479-49963__78579_2862__12265.1707873013.1280.1280.jpg?v=1742518977"},{"product_id":"20351-qu20351-1977-5-1987-5-f250-8-bolt-hub-and-rotor-with-1-2-studs","title":"QU20351 1977.5-1987.5 F250 8 Bolt Hub and Rotor with 1\/2\" Studs","description":"\u003cp\u003e\u003cstrong\u003eQU20351 1977.5-1987.5 F250 8 Bolt Hub and Rotor with 1\/2\" Studs\u003c\/strong\u003e is a brand new hub and rotor assembly with eight 1\/2\" wheel studs. QU20351 fits 1977.5-1979 F250 trucks with Dana 44 solid beam front axles and 1980-1987.5 F250 4x4 trucks with Dana 44IFS front axles. QU20351 includes factory installed inner and outer bearing cups.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eIncludes Cups\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e1977 Design Change\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e1978-1979 F-250\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003e1980-1987 F-250\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003ePack Bearings\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eSeal Installer\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIncludes Cups\u003c\/strong\u003e\u003cbr\u003eQU20351 includes new Timken® wheel bearing cups. Do not use your old wheel bearings with this hub. Order and install Install new \u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken® Outer Wheel Bearing, \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412 \u003c\/a\u003eTimken® Inner Wheel Bearing, and \u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" target=\"_blank\"\u003eQU90001 \u003c\/a\u003eWheel Seal.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1977 Design Change\u003c\/strong\u003e\u003cbr\u003eThe Ford F250 underwent a major, mid-year model change in 1977 effective with serial number Y20001. Regular Cab F250 4x4s built before serial number Y20001 are \"high boy\" models with remote mount transfer cases and Dana 44 front axles with bolt-on type hub locks or drive flanges. 1977 regular cab 4x4s built after serial number Y20000 are \"low boy\" models with direct mount transfer cases and Dana 44 front axles with internal spline mount hub locks or drive gears.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1978-1979 F-250\u003c\/strong\u003e\u003cbr\u003eThe standard front axle on 1978-1979 Ford F-250 3\/4 ton 4x4 trucks is a 3800 pound rated Dana 44 solid beam type front axle with internally splined wheel hubs. The end of the wheel hub measures about 3-5\/8\" in diameter and the spindle thread is 1-5\/8\". A 4500 pound rated Dana 60 was optional on 1978-1979 F-250 models. The optional Dana 60 will have a front wheel hub that measures about 4-1\/8\" at the outer end and a 2\" spindle thread.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1980-1987 F-250\u003c\/strong\u003e\u003cbr\u003eThe standard front axle on 1980-1987 Ford F-250 3\/4 ton 4x4 trucks is a 3800\/3850 pound rated Dana 44 Independent Front Suspension (IFS) front axle with internally splined wheel hubs. The end of the wheel hub measures about 3-5\/8\" in diameter and the spindle thread is 1-5\/8\". A 4600 pound rated Dana 50IFS axle was optional for the F250. The optional Dana 50 will have a front wheel hub that measures about 4-1\/8\" at the outer end and the spindle will have 2\" threads.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePack Bearings\u003c\/strong\u003e\u003cbr\u003eBefore installing your new wheel bearings, pack them with \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003ePyroplex® grease or other quality, disc brake rated, NLGI Grade 2 wheel bearing grease. I recommend you use \u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer to pack the bearings, but however you pack the bearings, your grease has to be clean and it MUST fill all the air spaces under the cage and between the bearing rollers.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeal Installer\u003c\/strong\u003e\u003cbr\u003eFor best results, install a new wheel seal (\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" target=\"_blank\"\u003eQU90001\u003c\/a\u003e) with \u003ca href=\"\/products\/1502-qt1502-front-and-rear-wheel-seal-installer-for-ford-and-dodge\" target=\"_blank\"\u003eQT1502 \u003c\/a\u003eSeal Installer. \u003ca href=\"\/products\/1502-qt1502-front-and-rear-wheel-seal-installer-for-ford-and-dodge\" target=\"_blank\"\u003eQT1502 \u003c\/a\u003einstaller will not damage, ding, or bend the wheel seal and it keeps tension on the seal garter spring so the spring does not jump off the lip (a very common problem with makeshift seal installation methods).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts and Tools\u003c\/strong\u003e\u003cbr\u003eMatching Parts and Tools for QU20351 Front Wheel Hub:\u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken® Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412 \u003c\/a\u003eTimken® Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" target=\"_blank\"\u003eQU90001 \u003c\/a\u003eWheel Seal\u003cbr\u003e\u003ca href=\"\/products\/40594-qu40594-1977-5-1979-ford-f250-dana-44-front-spindle-kit\" target=\"_blank\"\u003eQU40594 \u003c\/a\u003eSpindle for 1977.5-1979 F250\u003cbr\u003e\u003ca href=\"\/products\/42005-tk42005-8-bolt-front-spindle-for-1980-1992-f250-with-dana-44ifs-front-axle\"\u003eTK42005\u003c\/a\u003e Spindle for 1980-1987 F250 \u003cbr\u003e\u003ca href=\"\/products\/20352-qu20352-new-8-bolt-front-wheel-hub-with-9-16-studs\" target=\"_blank\"\u003eQU20352 \u003c\/a\u003eHub for 1987.5-1994 F250 with 9\/16\" Studs\u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018 \u003c\/a\u003eManual Hub Set \u003cbr\u003e\u003ca href=\"\/products\/50655-qu50655-warn-m248-lockout-hub-cap-o-ring\" target=\"_blank\"\u003eQU50655 \u003c\/a\u003eCap O-Ring for Warn Hub\u003cbr\u003e\u003ca href=\"\/products\/50240-qu50240-o-ring-for-warn-plastic-hub-dials\" target=\"_blank\"\u003eQU50240 \u003c\/a\u003eDial O-Ring for Warn Hub \u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003eRound, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770 \u003c\/a\u003eRound, 4 Slot Spindle Nut Kit for 1981-1994 with Auto Hubs with 5 Screws in the Cap \u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003eProtection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i \u003c\/a\u003e4 Lug Spindle Nut Socket for full time or manual hubs with ratchet or double spindle nuts\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003eF250 After Serial Number Y20000: 1977\u003cbr\u003eF250 with Dana 44 Front Axle: 1978, 1979\u003cbr\u003eF250 with Dana 44IFS Front Axle (with 1\/2\" wheel studs): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987.5\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657218367565,"sku":"20351","price":400.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU20351_clean_1200_mf__61106_19251__39201.1707873034.1280.1280.jpg?v=1742518994"},{"product_id":"20352-qu20352-new-8-bolt-front-wheel-hub-with-9-16-studs","title":"QU20352 New 8 Bolt Front Wheel Hub with 9\/16\" Studs","description":"\u003cp\u003e\u003cstrong\u003eQU20352 New 8 Bolt Front Wheel Hub\u003c\/strong\u003e with 9\/16\" Studs for 1987-1994 Ford F250 with Dana 44 front axle.\u003c\/p\u003e \u003cdiv class=\"col-md-8\"\u003e \u003cp\u003eAlso Available While Supplies Last: \u003ca href=\"\/products\/5520352-qu20352u-used-8-bolt-front-wheel-hub-with-9-16-studs\" target=\"_blank\"\u003eQU20352U \u003c\/a\u003eUsed 8 Bolt Front Wheel Hub\u003c\/p\u003e \u003c\/div\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657218531405,"sku":"20352","price":401.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/3505203340453705727-49963__94034_2864__25625.1707873044.1280.1280.jpg?v=1742519016"},{"product_id":"20621-qu20621-new-front-abs-hub-and-rotor-assembly-for-1995-1996-bronco","title":"QU20621 New Front ABS Hub and Rotor Assembly for 1995-1996 Bronco","description":"\u003cp\u003e\u003cstrong\u003eQU20621 New Front Hub and Rotor Assembly\u003c\/strong\u003e for 1995-1996 Ford Bronco with 4 wheel ABS brakes.  Includes bearing cups and tone ring.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657249398861,"sku":"20621","price":128.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20621_side_1200_clean__96385_13047__83041.1707873977.1280.1280.jpg?v=1742519750"},{"product_id":"42176-tk42176-srw-to-drw-front-adapter-set-for-85-97-f250-f350","title":"TK42176 SRW to DRW Front Adapter Set for 85-97 F250, F350","description":"\u003cp\u003e\u003cstrong\u003eTK42176 Single Rear Wheel to Dual Rear Wheel Front Adapter Set \u003c\/strong\u003efor 1984-1997 Ford F250, F350 trucks are precision machined in USA from solid steel. TK42176 includes 9\/16\" nuts to attach the adapter to your wheel hub plus studs and nuts to hold your dual wheel to the adapter. Quickly and easily convert your Ford SRW into a dually truck! Our adapters are designed to mount directly to your existing axle studs and require no modifications to your vehicle. Each adapter is machined specifically to your vehicle’s wheel mounting configuration for a perfect fit every time. TK42176 fits 1984-1997 type Ford original equipment type hub centric wheels. If you are using wheels from any other application, contact us!\u003c\/p\u003e \u003ctable style=\"border: 1px solid #000000\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center\"\u003e\u003cstrong\u003eFactory Wheel Stud Size\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003cstrong\u003eFront Adapter\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003cstrong\u003eRear Adapter\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e9\/16\" F250, F350, 84-97\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42176-tk42176-srw-to-drw-front-adapter-set-for-85-97-f250-f350\" rel=\"noopener\" target=\"_blank\"\u003eTK42176\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/21017-tk21017-9-16-srw-to-5-8-drw-rear-adapter-set-for-85-97-f250-f350\" rel=\"noopener\" target=\"_blank\"\u003eTK21017\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003eFits 9\/16\" Studs on SRW hubs. Includes studs to wheel\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e","brand":"Arrowcraft","offers":[{"title":"Default Title","offer_id":41658551894093,"sku":"42176","price":554.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/TK42176_1_clean__30729.1738355605.1280.1280.png?v=1779173063"},{"product_id":"5520348-qu20348u-used-splined-front-disc-brake-wheel-hub","title":"QU20348U USED Splined Front Disc Brake Wheel Hub","description":"\u003cp\u003e\u003cstrong\u003eQU20348U USED 1976-1992 F150, Bronco Splined Front Disc Brake Wheel Hub \u003c\/strong\u003e is a used internally splined front wheel hub that fits all 1976-1986, most 1987-1988 and all 1989-1992 Ford F100, F150 and full size Bronco 4x4s. Available while supplies last. Studs sold separately.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003e1987-1988\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#safety\"\u003eNever Reuse Wheel Bolts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eAfter Assembly\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1987-1988\u003c\/strong\u003e\u003cbr\u003eFor the 1987 and 1988 model year vehicles built to March 1988 (on some models to May 1988), Ford Broncos and F150 4x4s with factory manual hubs have a unique, one piece \"pancake\" hub\/rotor with two large diameter, close set wheel bearings. The lockout hub is a flange mount type that fits over the wheel studs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"safety\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eSafety Notes:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNever Reuse Wheel Bolts\u003c\/strong\u003e\u003cbr\u003eFor safety reasons, never reuse wheel bolts (studs).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAfter Assembly\u003c\/strong\u003e\u003cbr\u003eIt is relatively unusual for a big 4x4 brake rotor to have less than the maximum allowable runout and rotor thickness variation once it is assembled to a wheel hub. This is due to manufacturing tolerances of the parts and the pressures exerted on the hub and rotor when pressing in the wheel studs. After assembling your brake rotor to the new hub, the rotor should be checked for thickness variation (0.001\" {0.025 mm} maximum) and runout (0.005\" {0.127 mm} maximum with 0.003\" or less preferred). A rotor that is out of tolerance should be machined with an on-the-vehicle brake lathe if possible or on an accurate bench type brake lathe.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching parts and tools for QU20348U Hub are:\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" target=\"_blank\"\u003eQU90001 \u003c\/a\u003eWheel Seal \u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken® Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50578-qu50578-timken-tapered-wheel-or-diff-bearing\" target=\"_blank\"\u003eQU50578 \u003c\/a\u003eTimken® Inner Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Round Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Tanged Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/40106-qu40106-ratchet-type-spindle-nut-for-1985-1992-ford-dana-44ifs\" target=\"_blank\"\u003eQU40106 \u003c\/a\u003eRatchet Type Spindle Nut (1985-1992)\u003cbr\u003e\u003ca href=\"\/products\/40192-qu40192-front-spindle-kit-for-1976-1979-ford-dana-44\" target=\"_blank\"\u003eQU40192 \u003c\/a\u003eSpindle for 1976-1979\u003cbr\u003e\u003ca href=\"\/products\/40309-qu40309-spindle-for-1980-1992-dana-44ifs\" target=\"_blank\"\u003eQU40309 \u003c\/a\u003eSpindle for 1980-1992 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018 \u003c\/a\u003eWarn Manual Lockout Hub Set \u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U \u003c\/a\u003eSplined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427 \u003c\/a\u003eChrome Hub Cap for use with Splined Hub Gear\u003cbr\u003e\u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i \u003c\/a\u003e4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003eProtection Plus Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/1504-qt1504-dana-30-dana-44-and-gm-10-bolt-front-wheel-seal-installer\" target=\"_blank\"\u003eQT1504 \u003c\/a\u003eWheel Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003eBronco, F100, F150: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eBronco, F150 with Axle Tag Numbers 610268 or 610310: 1988\u003cbr\u003eBronco and F150: 1989, 1990, 1991, 1992\u003cbr\u003e\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660348956749,"sku":"5520348","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20348uclean_2__67473_8492__47832.1707930253.1280.1280.jpg?v=1742678376"},{"product_id":"5520350-qu20350u-used-front-hub-with-studs-for-1995-1996-f150-bronco","title":"QU20350U Used Front Hub with Studs for 1995-1996 F150, Bronco","description":"\u003cp\u003e\u003cstrong\u003eQU20350U Used Front Hub with Studs\u003c\/strong\u003e for 1995 and 1996 Ford F150 and full size Bronco. Available while supplies last.\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660349186125,"sku":"5520350","price":99.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20350u_clean__09595_8494__90023.1707930260.1280.1280.jpg?v=1742678392"},{"product_id":"5520352-qu20352u-used-8-bolt-front-wheel-hub-with-9-16-studs","title":"QU20352U Used 8 Bolt Front Wheel Hub with 9\/16\" Studs","description":"\u003cp\u003e\u003cstrong\u003eQU20352U Used 8 Bolt Front Wheel Hub\u003c\/strong\u003e with 9\/16\" Studs for 1987-1994 Ford F250 with Dana 44 front axle. Available while supplies last.\u003c\/p\u003e \u003cdiv class=\"col-md-8\"\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/20352-qu20352-new-8-bolt-front-wheel-hub-with-9-16-studs\" target=\"_blank\"\u003eQU20352 \u003c\/a\u003eNew 8 Bolt Front Wheel Hub\u003c\/p\u003e \u003c\/div\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660349448269,"sku":"5520352","price":200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20352uclean__18243_8495__84408.1707930281.1280.1280.jpg?v=1742678411"},{"product_id":"5520367-qu20367u-used-manual-hublock-for-1987-1988-bronco-f150-pancake-hubs","title":"QU20367U Used Manual Hublock for 1987-1988 Bronco, F150 Pancake Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU20367U 1987-1988 Used Manual Hublock\u003c\/strong\u003e For 1987-1988 Ford Bronco and F150 with \"pancake\" type front wheel hubs. Available while supplies last. Priced individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eBronco, F-150 with 'pancake' type front wheel hubs: 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660350660685,"sku":"5520367","price":124.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20367u__44480_8505__30680.1707930356.1280.1280.jpg?v=1742678504"},{"product_id":"20753-qu20753-front-hub-rotor-assembly-for-1987-1988-5-ford-f150-bronco","title":"QU20753 Front Hub \u0026 Rotor Assembly for 1987-1988.5 Ford F150 \u0026 Bronco","description":"\u003cp\u003e\u003cstrong\u003eQU20753 Pancake Style 4x4 Front Wheel Hub and Rotor Assembly\u003c\/strong\u003e for 1987-19887.5 Ford F150 and Bronco with Manual Hubs\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41660644851789,"sku":"20753","price":128.98,"currency_code":"USD","in_stock":true}]},{"product_id":"5520753-qu20753u-1987-1988-5-pancake-style-hub-f150-bronco","title":"QU20753U 1987-1988.5 Pancake Style Hub, F150, Bronco","description":"\u003cp\u003e\u003cstrong\u003eQU20753U Used Pancake Style 4x4 Front Wheel Hub and Rotor Assembly\u003c\/strong\u003e for 1987-1988.5 Ford F150 and Bronco with Manual Hubs. Limited to stock on hand!\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660655566925,"sku":"5520753","price":33.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20753u_top_1200_clean__23914_13100__50360.1707945919.1280.1280.jpg?v=1742699072"},{"product_id":"42268-tk42268-9-16-srw-to-9-16-drw-front-adapter-set-for-85-97-f250-f350","title":"TK42268 9\/16\" SRW to 9\/16\" DRW Front Adapter Set for 85-97 F250, F350","description":"\u003cp\u003e\u003cstrong\u003eTK42268 9\/16\" Single Rear Wheel to 9\/16\" Dual Rear Wheel Front Adapter Set \u003c\/strong\u003efor 1984-1997 Ford F250, F350 trucks are precision machined in USA from solid steel. TK42268 includes 9\/16\" nuts to attach the adapter to your wheel hub plus 9\/16\" studs. You will need to provide your own lug nuts to hold your dual wheel to the adapter. Quickly and easily convert your Ford SRW into a dually truck! Our adapters are designed to mount directly to your existing axle studs and require no modifications to your vehicle. Each adapter is machined specifically to your vehicle’s wheel mounting configuration for a perfect fit every time. TK42268 fits 1984-1997 type Ford original equipment type hub centric wheels. If you are using wheels from any other application, contact us!\u003c\/p\u003e","brand":"Arrowcraft","offers":[{"title":"Default Title","offer_id":41661127852109,"sku":"42268","price":499.98,"currency_code":"USD","in_stock":true}]},{"product_id":"5521060-qu21060u-used-1977-5-1986-dana","title":"QU21060U Used 1977.5-1986 F250 Dana 44 Wheel Hub","description":"\u003cp\u003eQU21060U Good used Internally Splined Front Wheel Hub for 1977.5-1986 Ford F250 4x4s with Dana 44 and Dana 44IFS Front Axles\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661204168781,"sku":"5521060","price":262.5,"currency_code":"USD","in_stock":false}]},{"product_id":"21069-qu21069-hub-brake-rotor-assembly-for-1976-1993-f100-f150-bronco","title":"QU21069 Hub \u0026 Brake Rotor Assembly for 1976-1993 F100, F150, Bronco","description":"\u003cp\u003e\u003cstrong\u003eQU21069 4x4 Hub and Brake Rotor Assembly for 1976-1992 Ford F150 and Bronco\u003c\/strong\u003e is a brand new internally splined front wheel hub with factory installed rotor, studs, and wheel bearing cups that fits all 1976-1986, most 1987-1988 and all 1989-1992 Ford F100, F150 and full size Bronco 4x4s.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003e1987-1988\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eIncludes\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eUse New Bearings with New Bearing Cups\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1987-1988\u003c\/strong\u003e\u003cbr\u003eFor the 1987 and 1988 model year vehicles built to March 1988 (on some models to May 1988), Ford Broncos and F150 4x4s with factory manual hubs have a unique, one piece \"pancake\" hub\/rotor with two large diameter, close set wheel bearings. The lockout hub is a flange mount type that fits over the wheel studs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003eQU21069 includes:\u003cbr\u003e\u003ca href=\"\/products\/20348-qu20348-new-splined-front-disc-brake-wheel-hub\"\u003eQU20348\u003c\/a\u003e 5 Bolt Wheel Hub\u003cbr\u003e5 Wheel Bolts\u003cbr\u003eInner and Outer Wheel Bearing Cups\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse New Bearings with New Bearing Cups\u003c\/strong\u003e\u003cbr\u003eA used bearing should not be mated to a new bearing cup. For maximum wheel bearing life, it is imperative that new wheel bearings be used with the factory installed bearing cups in your new wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching parts and tools for QU21069 Hub and Rotor are:\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU90001 \u003c\/a\u003eWheel Seal \u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken® Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50578-qu50578-timken-tapered-wheel-or-diff-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50578 \u003c\/a\u003eTimken® Inner Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Round Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4770 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Tanged Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/40106-qu40106-ratchet-type-spindle-nut-for-1985-1992-ford-dana-44ifs\" rel=\"noopener\" target=\"_blank\"\u003eQU40106 \u003c\/a\u003eRatchet Type Spindle Nut (1985-1992)\u003cbr\u003e\u003ca href=\"\/products\/40192-qu40192-front-spindle-kit-for-1976-1979-ford-dana-44\" rel=\"noopener\" target=\"_blank\"\u003eQU40192 \u003c\/a\u003eSpindle for 1976-1979\u003cbr\u003e\u003ca href=\"\/products\/40309-qu40309-spindle-for-1980-1992-dana-44ifs\" rel=\"noopener\" target=\"_blank\"\u003eQU40309 \u003c\/a\u003eSpindle for 1980-1992 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" rel=\"noopener\" target=\"_blank\"\u003eQU56018 \u003c\/a\u003eWarn Manual Lockout Hub Set \u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" rel=\"noopener\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" rel=\"noopener\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/QU40657U Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40427 \u003c\/a\u003eChrome Hub Cap for use with Splined Hub Gear\u003cbr\u003e\u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQT1012i \u003c\/a\u003e4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003eProtection Plus Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/1504-qt1504-dana-30-dana-44-and-gm-10-bolt-front-wheel-seal-installer\" rel=\"noopener\" target=\"_blank\"\u003eQT1504 \u003c\/a\u003eWheel Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003eFord:\u003cbr\u003e\u003c\/strong\u003eBronco, F100, F150: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eBronco, F150 with Axle Tag Numbers 610268 or 610310: 1988\u003cbr\u003eBronco and F150: 1989, 1990, 1991, 1992\u003c\/p\u003e ","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661221306445,"sku":"21069","price":139.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu21069_3052_1600__64845_21430__52791.1707967266.1280.1280.png?v=1742737822"},{"product_id":"21277-qu21277-9-16-wheel-lug-nut-with-1-1-16-hex","title":"QU21277 9\/16\" Wheel Lug Nut with 1-1\/16\" Hex","description":"\u003cp\u003eQU21277 9\/16\" - 18 Right Hand Steel Thread Wheel Lug Nut with 1-1\/16\" Hex. 60 degree taper cone seat for stock type Ford Wheels\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661431349325,"sku":"21277","price":7.98,"currency_code":"USD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/wheel_20hubs__64529_d0e91953-eb1a-4cf2-a969-5a51d47c0e06.jpg?v=1773182475","url":"https:\/\/torqueking.com\/collections\/wheel-hubs-1980-1996-ford-f150-and-bronco-dana-44ifs-front.oembed","provider":"Torque King 4x4","version":"1.0","type":"link"}