{"title":"Spindles 1977-1991 GM 10 Bolt","description":"\u003cp\u003eShop now for Spindles and Spindle Parts for 1977-1991 Chevy and GMC GM 10 Bolt Front Axles. Great selection. In stock. Quick Shipping. \u003c\/p\u003e\n\u003cp\u003e1977-1991 GM 10 Bolt Front Axles use a double spindle nut set with a lockwasher for front wheel bearing adjustment and retention. The inner and outer nuts are the same for all years, but the Lockwasher was changed in 1982 when automatic locking hubs were introduced. The Inner Nut has a pin that engages with one of the holes in the lockwasher. The Outer Nut is a jam nut.\u003c\/p\u003e","products":[{"product_id":"4770-qk4770-front-4x4-spindle-nut-and-washer-set","title":"QK4770 Front 4x4 Spindle Nut and Washer Set","description":"\u003cp\u003e\u003cstrong\u003e QK4770 Front 4x4 Spindle Nut and Washer Set \u003c\/strong\u003eincludes genuine original equipment parts for Dana 44 (Dodge, Ford), GM 10 Bolt (Chevy\/GMC) front drive axles. This Set was used on many SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings. GM used the \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Tabbed Lockwasher from 1982 to 1991, Ford Dana 44IFS axles had \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e off and on from 1981 to 1996. Dodge used it from 1980-1984. QK4770 Kit includes one of each: QU40004, QU40031, QU40429. USA Made. \u003cspan style=\"color: #ff0000\"\u003eLimited supply.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003eAvailable While Supplies Last: \u003cstrong\u003e\u003ca href=\"\/products\/554770-qk4770u-used-front-4x4-spindle-nut-and-washer-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4770U\u003c\/a\u003e Used Front 4x4 Spindle Nut and Washer Set\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut Kit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eAutomatic Locking Hubs\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eFits 1-5\/8” Thread Dia.\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003ePin\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAutomatic Locking Hubs\u003c\/strong\u003e\u003cbr\u003eQK4770 was mainly used on vehicles with available automatic locking hubs. The four tabs on \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Washer engaged 4 slots in the automatic hub body.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits 1-5\/8” Thread Dia.\u003c\/strong\u003e\u003cbr\u003eQK4770 fits spindles with thread diameters of 1-5\/8\". The component parts are: \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" rel=\"noopener\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut, \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Spindle Nut Lock Washer, and \u003ca href=\"\/products\/40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread\" rel=\"noopener\" target=\"_blank\"\u003eQU40031\u003c\/a\u003e Outer Spindle Nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePin\u003c\/strong\u003e\u003cbr\u003eThe pin that protrudes from the outboard face of \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" rel=\"noopener\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut is an anti-rotation device that engages with one of the holes in \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e Dana 44 SUVs, ½ ton and ¾ ton, and GM 10 Bolt \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDodge: \u003c\/strong\u003e1980, 1981, 1982, 1983, 1984\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e Off and on from 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy, GM:\u003c\/strong\u003e 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656276254797,"sku":"4770","price":89.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4770_clean__60726.1721236791.1280.1280.png?v=1742479752"},{"product_id":"4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts","title":"QK4727 Dana 30 \u0026 Dana 44 Front Spindle Nut Kit with Round 4-Slot \u0026 1-5\/8\" Thread Nuts","description":"\u003cp\u003e\u003cstrong\u003eQK4727 4 Slot Dana 30, Dana 44, GM 10 Bolt Front Spindle Nut Kit \u003c\/strong\u003eincludes one each genuine original equipment \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut, \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e Spindle Nut Lock Washer, and \u003ca href=\"\/products\/40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread\" target=\"_blank\"\u003eQU40031\u003c\/a\u003e Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC), and 1974-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This nut was used as the inner spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974. Jeep J-series full size 4x4s also used these parts from 1973-1989. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/554727-qa4727u-good-used-4-slot-front-spindle-nut-kit\" target=\"_blank\"\u003eQA4727U\u003c\/a\u003e Used Front Spindle Nut Kit available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFitment\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eTool\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eQK4727 Spindle Nut Kit fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThe pin that protrudes from the outboard face of \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut is an anti-rotation device that engages with one of the holes in \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003cbr\u003e\u003c\/strong\u003e1\/2 ton and 3\/4 ton trucks with Dana 44 or GM 10 Bolt front axles with serviceable wheel bearings: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton ton trucks with Dana 44 front axle and serviceable wheel bearings: 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e:\u003cbr\u003eBroncos with Dana 30 front axle: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eF150, F250, Bronco with Dana 44 Front Axle: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF100, F150, F250 1\/2 ton and 3\/4 ton trucks with standard Dana 44 front axle and serviceable wheel bearings: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF250 Crew Cab Dana 60 Front Axle: 1974, 1975, 1976, 1977\u003cbr\u003eF150, Bronco with Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with Dana 44IFS Front Axle, Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton 1100 and 1110 series 4x4: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series Full Size 4x4s:\u003c\/strong\u003e\u003cbr\u003eWagoneer, Cherokee, Cherokee Chief, J10, J20 Dana 44 front axles: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656760729677,"sku":"4727","price":29.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QK4727_0474_clean__53543_19646__09429.1707849699.1280.1280.png?v=1742500652"},{"product_id":"4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles","title":"QK4734 Pair of Spindle Bearings for Dana 30, Dana 44, GM 10 Bolt Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQK4734 Front Axle Shaft Spindle Bearing Set\u003c\/strong\u003e fits late 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles, plus 1976-1977 Ford F-250 crew Cab Dana 60 axles. One bearing is pressed into each spindle to support the outer axle shaft. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eLittle Bearing, Big Job\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSeals and Thru\u003c\/a\u003est Washers\u003cbr\u003e\u003ca href=\"#note3\"\u003eBearing Depth\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eChevy\/GMC Exploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eDodge\/Plymouth\/Ram Exploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eFord Exploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note7\"\u003eInternational Exploded Views\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eJeep Exploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLittle Bearing, Big Job\u003c\/strong\u003e\u003cbr\u003eThese little bearings carry almost all the weight of your heavy axle shafts. The only support point inside the axle housing is the differential itself, there are no bearings or bushings in the axle tubes except on the disconnect side of 1989-1993 Dodge Dana 44 axles with vacuum controlled central axle disconnect systems.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeals and Thrust Washers\u003c\/strong\u003e\u003cbr\u003eOver the years, several seal and thrust washer configurations were used to protect this bearing. For mid 1970's and later, all applications will use either \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003e\u003cspan\u003eQU40056\u003c\/span\u003e \u003c\/a\u003eSmall V-Seal or \u003ca href=\"\/products\/40556-qu40556-spindle-seal-thrust-washer-1993-97-ford-d44-ifs\" target=\"_blank\"\u003e\u003cspan\u003eQU40556\u003c\/span\u003e \u003c\/a\u003eUnitized Seal\/Thrust Washer. QK4734 Spindle Bearings must be installed deep enough that the thrust washer will seat against the spindle face. For ALL applications, care must be taken not to seat the bearing too deep as it will bind if pressed beyond the machined bore.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBearing Depth\u003c\/strong\u003e\u003cbr\u003eEarly production Dana 30 and Dana 44 open knuckle axles that used these bearings (generally prior to 1975) did not use \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003e\u003cspan\u003eQU40056\u003c\/span\u003e\u003c\/a\u003e Small Spindle V-Seal between the spindle bearing and axle shaft thrust washer. Spindles from these early axles are not bored deep enough to install both a spindle bearing and a seal. Circa 1975 and later axles do have deeper spindle bearing bores. For these axles, use optional \u003ca href=\"\/products\/1134-qt1134-spindle-bearing-installer-tool-for-dana-30-35ifs-44-44ifs-early-ford-dana-60-and-gm-10-bolt-front-axles\" target=\"_blank\"\u003e\u003cspan\u003eQT1134\u003c\/span\u003e \u003c\/a\u003eSpindle Bearing Installer to seat your new QK4734 Spindle Bearings to the correct depth below the spindle face to permit the installation of \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003e\u003cspan\u003eQU40056\u003c\/span\u003e \u003c\/a\u003eSmall spindle V-Seal\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e =\"color: #ff0000\"\u0026gt;\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e Chevy\/GMC Exploded Views\u003cbr\u003e\u003c\/strong\u003eLinks to our FREE, application specific \u003ca href=\"\/collections\/chevy-and-gmc-4x4-front-axle-exploded-views\" target=\"_blank\"\u003e\u003cspan\u003eexploded views for Chevy or GMC\u003c\/span\u003e\u003c\/a\u003e 4x4 fro \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e nt axles that use QK4734 Spindle Bearings\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cs style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e f0000\"\u0026gt;\u003ca name=\"note5\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge\/Plymouth\/Ram Exploded Views\u003c\/strong\u003e\u003cbr\u003e\u003c\/s\u003e\u003c\/strong\u003eLinks to our FREE, application specific \u003ca href=\"\/collections\/dodge-ram-front-axle-exploded-views\" target=\"_blank\" style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e \u0026gt;\u003cspan\u003eexploded views for Dodge, Plymouth, or Ram\u003c\/span\u003e\u003c\/a\u003e 4x4 front axles tha\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e  Bearings\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFord Exploded Views\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eLinks to our FREE, applica \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e tion specific \u003ca href=\"\/collections\/ford-4x4-front-axle-exploded-views\" target=\"_blank\"\u003e\u003cspan\u003eexplode\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e an\u0026gt;\u003c\/span\u003e\u003c\/a\u003e 4x4 front axles that use QK4734 Spindle Bearings\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInternational Exploded Views\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eLinks to our FREE, application specific \u003ca href=\"\/collections\/international-front-axle-exploded-views\" targ style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e ploded views for IHC\u003c\/a\u003e 4x4 front axles that use QK4734 Spindle Bearings\u003cbr\u003eUnder Construction!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eJeep Exploded Views\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eLinks to our FREE, application specific \u003ca href=\"\/collections\/jeep-front-axle-exploded-views\" target=\"_blank\"\u003e\u003cspan\u003eexploded views for Jeep\u003c\/span\u003e\u003c\/a\u003e 4x4 front axles that use QK4734 Spindle Bearings\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cp\u003e\u003cstrong\u003eSolid Axles:\u003c\/strong\u003e\u003cbr\u003eLate 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles\u003cbr\u003eFord F-250 crew Cab Dana 60 axles: 1976,1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIFS Axles:\u003c\/strong\u003e\u003cbr\u003e1980-1996 Ford Bronco and F150 Dana 44IFS Front Axles\u003cbr\u003e1990-1997 Ford Expedition and Ranger Dana 35IFS Front Axles\u003cbr\u003e1994-1997 Ford Ranger Dana 28IFS Front Axles\u003c\/p\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656762040397,"sku":"4734","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4734_clean__91883.1721236243.1280.1280.png?v=1742500776"},{"product_id":"4739-qk4739-4x4-front-spindle-seal-and-thrust-washer-kit","title":"QK4739 4x4 Front Spindle Seal and Thrust Washer Kit","description":"\u003cp\u003e\u003cstrong\u003eQK4739 4x4 Front Spindle Seal and Thrust Washer Kit\u003c\/strong\u003e contains genuine original equipment spindle seals and thrust washers to service \u003cstrong\u003eboth\u003c\/strong\u003e sides of your front axle on your 4x4 truck. Fits most Mid 1970's to 1993 SUV, 1\/2, and standard 3\/4 ton Model 30, 44, 44IFS, and GM 10 bolt open knuckle front 4x4 drive axles. These inexpensive parts should be replaced \u003cem\u003e\u003cstrong\u003eanytime\u003c\/strong\u003e\u003c\/em\u003e the spindle is removed. Thrust Washers USA Made, Seals imported.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMatching Slinger\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eKit Contents\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eDead Spindle Design\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003e1985-1993 Dodge\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note5\"\u003eFord\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note6\"\u003e1983.5-1996 Ford\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note7\"\u003eJeep\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003eMatching Parts\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Slinger\u003c\/strong\u003e\u003cbr\u003eThe matching Axle Shaft Slinger is \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Contents\u003c\/strong\u003e\u003cbr\u003eQK4739 includes two each of these genuine original equipment component parts: \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003eQU40056\u003c\/a\u003e Small V-Seal, \u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" target=\"_blank\"\u003eQU40070\u003c\/a\u003e Axle Shaft Thrust Washer, and \u003ca href=\"\/products\/40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b\" target=\"_blank\"\u003eQU40071\u003c\/a\u003e Large V-Seal.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDead Spindle Design\u003c\/strong\u003e\u003cbr\u003eThe dead spindle design on many early open knuckle front axles use a needle bearing to support the outer axle shaft. To protect the bearing and control axial thrust, a 4 piece set consisting of an Axle Shaft Slinger, Large V-Seal, Small V-Seal, and Thrust Washer was used. We have Kits and individual exact replacement Dana-Spicer Spindle small parts for your hard-working 4x4s.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1985-1993 Dodge\u003c\/strong\u003e\u003cbr\u003eThe dead spindle design of the 1985-1993 Dodge Dana 44 CAD front axle uses a needle bearing to support the right outer axle shaft and on 1988-1993 left outer axle shafts. On 1985-1987 trucks, no spindle bearing is used on the LEFT side as the left inner axle shaft is supported next to the yoke by \u003ca href=\"\/products\/50155-qu50155-front-axle-transmission-and-transfer-case-roller-bearing\" target=\"_blank\"\u003eQU50155\u003c\/a\u003e Bearing. To protect the spindle bearing and control axial thrust, a 4 piece set consisting of an Axle Shaft Slinger, Large V-Seal, Small V-Seal, and Thrust Washer was used. We have both Kits and individual exact replacement Dana-Spicer Spindle small parts for your hard-working 1985-1993 Dodge 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eFord used a single, 2\" ID metal shell Spindle Seal up to 1972. These axles also have a bronze outer axle shaft thrust washer. For most 1973 and newer axles, these parts were replaced by a larger diameter single rubber V-Seal and a plastic trust washer, however Ford does catalog a 2\" ID Rubber V-Seal for some 1973-1976 axles. In 1974, an additional V-Seal was added next to the spindle bearing on most axles. To accommodate the new part, the spindle had to be bored a bit deeper so the spindle bearing could be installed to a slightly greater depth. The 1974 design was used on all subsequent Ford Dana 44 axles through 1979.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1983.5-1996 Ford\u003c\/strong\u003e\u003cbr\u003eThe dead, hollow spindle design of the 1983.5-1996 era Ford Dana 44 IFS axles uses one QK4734.5 needle bearing to support the outer axle shaft. Ford used two different Spindle Seal types for 1983.5-1996 Dana 44IFS Front Axles. A two part Spindle Seal and Thrust Washer design was new for 1993, replacing the earlier four piece set-up used on most trucks from 1983.5-1992. Personally, I prefer the older Seal design which can be retrofitted to 1993-1996 trucks if you order (2) \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Slingers and (1) \u003ca href=\"\/products\/4739-qk4739-4x4-front-spindle-seal-and-thrust-washer-kit\" target=\"_blank\"\u003eQK4739\u003c\/a\u003e Seal and Thrust Washer Set.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eJeep\u003c\/strong\u003e\u003cbr\u003eAlthough Jeep Parts Books show a 2\" ID V-Seal for 1974-1979, I can not recall seeing any of Jeeps with the 2\" Seal, all had the 2-1\/4\" ID Seal. In the early 1980's, we did get some Spindle Kits for 1974-1976 drum brake Cherokees on a closeout deal from Jeep that did include the 2\" Seal so we sell this and the small Slinger in case you need one for an early production axle, but most if not all 1974-1976 and ALL 1977 and newer J-Series axles have the 2-1\/4\" Seal and Thrust Washer set-up.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Slinger\u003cbr\u003e\u003ca href=\"\/products\/4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQK4734\u003c\/a\u003e Spindle Bearing Set\u003cbr\u003e\u003ca href=\"\/products\/40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt\" target=\"_blank\"\u003eQU40228\u003c\/a\u003e Spindle Bearing and Seal Kit for 1 side\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GM:\u003c\/strong\u003e\u003cbr\u003e10 Bolt Open Knuckle 4x4 Front Drive Axles: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eRamcharger, W-150, W-250 4x4s with Dana 44 Open Knuckle front axle: 1980, 1981, 1982, 1983, 1984\u003cbr\u003eRamcharger, W-100, W-150, W-200, W-250 4x4x with Dana 44 open knuckle front axle: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003ePlymouth Traildusters with Dana 44 Open Knuckle front axles: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco, F-100, F-150, with Dana 44 front axle with 2nd design V-Seal: 1974, 1975, 1976\u003cbr\u003eBronco, F-100, F-150, with Dana 44 front axle: All 1977, 1978, 1979\u003cbr\u003eF-250 4x4s with Dana 44 open knuckle front axle: 1976, 1977, 1978, 1979\u003cbr\u003eBronco, F-150, F-250 4x4s with Dana 44IFS Twin Traction Beam front axle: 1983.5, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, J10, J20, Wagoneer with Dana 44 open knuckle front axle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656762433613,"sku":"4739","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QK4739-1.png?v=1772222850"},{"product_id":"40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8","title":"QU40004 4x4 Front 4 Slot Inner Spindle Nut with Pin Thread Size 1-5\/8\"","description":"\u003cp\u003e\u003cstrong\u003eQU40004 4x4 Front, 4 Slot Inner Spindle Nut with Pin\u003c\/strong\u003e is a genuine original equipment part for many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 closed knuckle front drive axles. This nut was used as the inner spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1980 to 1993, Jeep J-series full size 4x4s had it from 1973-1989. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eThread Diameter\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003ePin Engagement\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSocket\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThread Diameter\u003c\/strong\u003e\u003cbr\u003eQU40004 Spindle Nut fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePin Engagement\u003c\/strong\u003e\u003cbr\u003eThe pin that protrudes from the outboard face is an anti-rotation device that engages with one of the holes in either \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e or \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Spindle Lock Washers. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSocket\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMost SUVs\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC GM:\u003cbr\u003e\u003c\/strong\u003e1\/2 Ton \u0026amp; 3\/4 Ton Pickups with Dana 44 Front Axles\u003cbr\u003eGM 10 Bolt Front Axle\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge Dana 44 Front Axles:\u003c\/strong\u003e\u003cbr\u003e1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003e1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003e\u003c\/strong\u003eFord Bronco, Many Dana 30 1978-1979\u003cbr\u003eDana 44 Front Axles 1978-1979\u003cbr\u003eF-150, F-250 Crew Cab Dana 60 Closed Knuckle Front Drive Axles: 1973, 1974, 1975, 1976, 1977, 1978-1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series Full Size 4x4s with Dana 44 Front Axles:\u003c\/strong\u003e\u003cbr\u003e1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656929779789,"sku":"40004","price":19.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40004_clean__38386.1728498941.1280.1280.png?v=1742509568"},{"product_id":"40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread","title":"QU40031 4x4 Front Outer Spindle Nut with 4 Slots and 1-5\/8\" Thread","description":"\u003cp\u003e\u003cstrong\u003eQU40031 Outer 4 Slot 4x4 Front Spindle Nut\u003c\/strong\u003e is a genuine Dana-Spicer original equipment part for Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This 1-5\/8\" thread nut was used as the outer spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1980 to 1993, Jeep J-series full-size 4x4s had it from 1973-1989. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e and \u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e Spindle Nut Kits\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540031-qu40031u-used-outer-4-slot-4x4-front-spindle-nut\" target=\"_blank\"\u003eQU40031U\u003c\/a\u003e Used Outer 4 Slot Spindle Nut available while supply lasts\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eSpindle Nut Sockets\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eQU40031 Spindle Nut fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Nut Sockets\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eMost SUV's, 1\/2 ton, and 3\/4 ton with serviceable wheel bearings (late 1950's to early 1990's)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e:\u003cbr\u003eDana 30 (Ford Bronco) and Dana 44 (all makes)\u003cbr\u003eF-250 Crew Cab (Dana 60 front drive axles): 1973, 1974, 1975, 1976, 1977\u003cbr\u003eF150, F250, Bronco, Dana 44 1978-1979 \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e:\u003cbr\u003eGM 10 Bolt\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e:\u003cbr\u003e1\/2 ton and 3\/4 ton: 1969, 1970, 1971, 1972, 1973, 1974, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e:\u003cbr\u003eJ-series full size 4x4s: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656940298317,"sku":"40031","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40031_clean__56182.1728499195.1280.1280.png?v=1742509884"},{"product_id":"40054-qu40054-3-8-sae-x-1-1-2-long-front-spindle-to-knuckle-bolt","title":"QU40054 3\/8\" SAE x 1-1\/2\" Long Front Spindle to Knuckle Bolt","description":"\u003cp\u003e\u003cstrong\u003eQU40054 3\/8\" SAE x 1-1\/2\" Long Front Spindle to Knuckle Bolt \u003c\/strong\u003e is a genuine original equipment Dana Knuckle Bolt that fits many 1970's to 1990's Chevy, GMC, and Jeep front axles with disc brakes. A flat on the bolt head provides clearance for the spindle to fit into the knuckle. Serrated shank resists spinning when removing or installing the spindle retaining nut. QU40054 is used on many Chevy, GMC, and Jeep Dana 44 and GM 10 Bolt Front Axles front axles. Use with \u003ca href=\"\/products\/95035-qu95035-3-8-fine-thread-class-c-lock-nut\" target=\"_blank\"\u003eQU95035\u003c\/a\u003e 3\/8\" Grade 8 SAE Lock Nut. Sold individually.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eLength\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eVerify Old Bolt\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLength\u003c\/strong\u003e\u003cbr\u003eUsable length is approximately 1.468\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eVerify Old Bolt\u003c\/strong\u003e\u003cbr\u003eAlways verify the length of your old bolt before ordering new ones. The application information we provide is as accurate as we can make it from catalog data and shop experience, but several different bolt lengths were used over the years so you need to double check your original part measures the same as our new replacements.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eBlazer, Jimmy, Suburban, K10, K15, K1500, K20, K25, K2500 Trucks: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBlazer, Jimmy, V1500 Suburban, V2500 Suburban: 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eWagoneer: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10, J20: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656953897037,"sku":"40054","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40054_2798_1600__48242_21361__98943.1707861396.1280.1280.png?v=1742510261"},{"product_id":"40056-qu40056-small-spindle-to-axle-shaft-v-seal","title":"QU40056 Small Spindle to Axle Shaft V-Seal","description":"\u003cp\u003e\u003cstrong\u003eQU40056 Small Spindle to Axle Shaft V-Seal\u003c\/strong\u003e is a genuine original equipment 1-5\/16\" ID Rubber V-Seal that is installed in your spindle between \u003ca href=\"\/products\/4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQK4734\u003c\/a\u003e Spindle Bearing and \u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" target=\"_blank\"\u003eQU40070\u003c\/a\u003e Spindle Thrust Washer. Fits most Mid 1970's to 1993 SUV, 1\/2, and standard 3\/4 ton Model 30, 44, 44IFS, and GM 10 bolt open knuckle front 4x4 drive axles, plus F150, F250, Bronco, Dana 44, 1976-1977 F-250 Crew Cab Dana 60 front axle. Imported.\u003c\/p\u003e \u003cdiv class=\"col-md-8\"\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt\" target=\"_blank\"\u003eQU40228\u003c\/a\u003e Small Spindle Bearing and Seal Kit and \u003ca href=\"\/products\/4739-qk4739-4x4-front-spindle-seal-and-thrust-washer-kit\" target=\"_blank\"\u003eQK4739\u003c\/a\u003e Front Spindle Seal and Thrust Washer Kit.\u003c\/p\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSlinger\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSlinger\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" target=\"_blank\"\u003eQU40070\u003c\/a\u003e is made to fit axle shafts with \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Axle Shaft Slinger.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching parts for applications using QU40056 Small V-Seal are: \u003ca href=\"\/products\/4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQK4734\u003c\/a\u003e Spindle Bearing, \u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" target=\"_blank\"\u003eQU40070\u003c\/a\u003e Axle Shaft Thrust Washer, and \u003ca href=\"\/products\/40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b\" target=\"_blank\"\u003eQU40071\u003c\/a\u003e Large V-Seal.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eInstall QU40056 V-Seal with the flat face towards the Spindle Bearing. Lubricate the Seal with \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex Plus® synthetic NLGI #2 grease or other suitable water resistant grease.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eFits most Mid 1970's-1993 SUV, 1\/2, and standard 3\/4 ton Model 30, 44, 44IFS, and GM 10 bolt open knuckle front 4x4 drive axles, plus 1976-1977 F-250 Crew Cab Dana 60 front axles\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eDana 35IFS with BOM numbers: 610300, 610365, 610366, 610436, 610437\u003cbr\u003eF150, F250, Bronco, Dana 44, 1978-1979\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656954945613,"sku":"40056","price":11.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40056__82558_9031__32119.1707861436.1280.1280.jpg?v=1742510305"},{"product_id":"40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt","title":"QU40058 2-1\/4\" 4x4 Outer Axle Shaft Slinger for Dana 30, Dana 44, GM 10 Bolt","description":"\u003cp\u003e\u003cstrong\u003eQU40058 2-1\/4\" 4x4 Outer Axle Shaft Slinger\u003c\/strong\u003e for Dana 30, Dana 44, and GM 10 Bolt Front Axles acts as both a dirt deflector and a sealing surface on open knuckle axles. Replace anytime they are dinged, bent, or badly corroded. QU40058 is a genuine original equipment part that was used on most SUVs and 4x4 trucks up through 3\/4 ton rating starting in 1972 and to stretching all the way to 1993. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eDimensions and Matching Seal\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThese Slingers will have to be pressed or driven onto your outer axle shafts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDimensions and Matching Seal\u003c\/strong\u003e\u003cbr\u003eApproximate Dimensions of QU40058: 3-3\/8\" Flange Outside Diameter, 2-1\/4\" Outside Diameter for Seal, 2-1\/8\" Inside Diameter. Matching V-Seal is \u003ca href=\"\/products\/40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b\" target=\"_blank\"\u003eQU40071\u003c\/a\u003e which is part of \u003ca href=\"\/products\/40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt\" target=\"_blank\"\u003eQU40228\u003c\/a\u003e Spindle Bearing and Seal Kit.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eGM 10 Bolt Solid Beam Front Axle: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eDana 44 Front Axle: 1972.5, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge 4x4s with Dana 44 Open Knuckle Front Axle:\u003c\/strong\u003e\u003cbr\u003eRamcharger, W-150, W-250, Plymouth Trailduster: 1980, 1981, 1982, 1983, 1984\u003cbr\u003eRamcharger, W-100, W-150, W-200, W-250, Plymouth Trailduster: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF-100, F-150, Bronco with Dana 44 Front Axle: Most 1973, 1974, 1975, 1976, 1978, 1979\u003cbr\u003eF-100, F-150, Bronco with Dana 44 Open Knuckle Front Axle: All 1977, 1978, 1979\u003cbr\u003e1976, 1977, 1978, 1979 F-250 with Dana 44 Open Knuckle Front Axle\u003cbr\u003eF-250 Crew Cab with Dana 60 Open Knuckle Front Axle: 1976, 1977\u003cbr\u003eBronco, F-150, F-250 4x4s with Dana 44 IFS Twin Traction Beam Front Axles: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eDana 35IFS BOM numbers: 610300, 610365, 610366, 610436, 610437\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003eScout II with Dana 44 Front Axles and Disc Brakes: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep \u003cstrong\u003e 4x4s with Dana 44 Open Knuckle Front Axle:\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003eCherokee, J10, J20, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656956321869,"sku":"40058","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40058_1200_clean__79776_12404__39952.1707861488.1280.1280.jpg?v=1742510341"},{"product_id":"40060-qu40060-round-spindle-lock-washer","title":"QU40060 Round Spindle Lock Washer","description":"\u003cp\u003e\u003cstrong\u003eQU40060 Round Spindle Lock Washer\u003c\/strong\u003e for Dana 28IFS, Dana 30, Dana 35IFS, Dana 44 (All Makes), Dana 44IFS, 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles, and GM 10 (Chevy\/GM) Bolt Front Axles. This washer was used between the inner and outer spindle nuts on most SUVs, 1\/2 ton and 3\/4 ton Chevy, Ford, and GM trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1985 to 1993, Jeep J-series full size 4x4s had it from 1974-1991. USA Made.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut Kit.\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540060-qu40060u-good-used-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060U\u003c\/a\u003e Used Round Spindle Lock Washer available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eOlder Ford Tabs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eSize\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOlder Ford Tabs\u003c\/strong\u003e\u003cbr\u003eQU40060 has the correct ID and OD to fit 1971 and prior Ford Broncos with Dana 30 front axles, but the tab that engages the spindle slot is wider than the one on the no longer available washer used by Ford.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003eQU40060 Spindle Washer fits spindles with thread diameters of 1-5\/8\" or 38mm.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/4769-qa4769-spindle-nut-kit-for-dana-28ifs-dana-35ifs-front-axles\" target=\"_blank\"\u003eQA4769\u003c\/a\u003e 1990-1997 Ford Dana 28IFS, 35IFS\u003cbr\u003e\u003ca href=\"\/products\/40108-qu40108-outer-spindle-nut-without-pin-for-dana-35-front-axles\" target=\"_blank\"\u003eQU40108\u003c\/a\u003e Dana 28IFS, Outer Spindle Nut\u003cbr\u003e\u003ca href=\"\/products\/40123-qu40123-inner-spindle-wheel-bearing-nut-with-pin-for-dana-35ifs-front-axles\" target=\"_blank\"\u003eQU40123\u003c\/a\u003e Dana 28IFS Inner Spindle Nut with Pin\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Dana 30, 44, 44HD\u003cbr\u003e\u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Dana 30, 44 Inner Spindle Nut\u003cbr\u003e\u003ca href=\"\/products\/40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread\" target=\"_blank\"\u003eQU40031\u003c\/a\u003e Dana 30, 44 Outer Spindle Nut\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GM:\u003c\/strong\u003e\u003cbr\u003eK10, K20, K15, K25, Standard Dana 44: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eDana 44 HD Closed Knuckle which uses a 3 piece double nut \u0026amp; washer set to adjust \u0026amp; retain wheel bearings: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eBlazer, Jimmy, 1\/2 ton, 3\/4 ton 4x4s Dana 44 Open Knuckle: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eGM 10 Bolt 8.5\" Front Axle: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW-100 Dana 44 4x4s: 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eRamcharger, W-100, W-150, W-200, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord Front Axle:\u003c\/strong\u003e\u003cbr\u003eRanger Pickup Dana 28IFS with 27 Spline Manual Lock Hubs: 1993, 1994, 1995, 1996, 1997\u003cbr\u003eBronco Dana 30: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eRanger Pickup, Bronco II, Explorer with Dana 35IFS \u0026amp; 27 Spline Manual Lock Hubs: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003eBronco, F-100, F-150 F-250, Dana 44: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF-100 1\/2 ton 4x4s Regular Cab trucks with Standard Dana 44 Closed Knuckle: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF-250 3\/4 ton 4x4s Regular Cab trucks with Standard Dana 44 Closed Knuckle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF-250 3\/4 ton 4x4s with Dana 44 Open Knuckle: 1976, 1977, 1978, 1979\u003cbr\u003eF-250 3\/4 ton Dana 44HD: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eBronco, F-100, F-150, F-250 4x4s with Dana 44IFS Front Axles with Manual Hub-Locks: 1983.5, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF-250 Crew Cab Dana 60 Front Axles: 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e1100 Dana 44: 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series:\u003c\/strong\u003e\u003cbr\u003eJ-Series Full-Size 4x4s: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656957599821,"sku":"40060","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40060_1_1200_clean__43163_13998__76512.1707861557.1280.1280.jpg?v=1742510383"},{"product_id":"40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer","title":"QU40070 Plastic Front Axle Shaft to Spindle Thrust Washer","description":"\u003cp\u003e\u003cstrong\u003e QU40070 Axle Shaft to Spindle Thrust Washer\u003c\/strong\u003e is a genuine original equipment plastic thrust washer that controls axial thrust between your outer axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1\/2, and standard 3\/4 ton Model 30, 44, 44IFS, and GM 10 bolt open knuckle front 4x4 drive axles, plus F150, F250, Bronco Dana 44, 1978-1979, 1976-1977 F-250 Crew Cab Dana 60 front axle. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5540070-qu40070u-used-axle-shaft-to-spindle-thrust-washer\" target=\"_blank\"\u003eQU40070U\u003c\/a\u003e Used Thrust Washer available while supplies last.\u003cbr\u003eAlso see \u003ca href=\"\/products\/40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt\" target=\"_blank\"\u003eQU40228\u003c\/a\u003e Small Spindle Bearing and Seal Kit and \u003ca href=\"\/products\/4739-qk4739-4x4-front-spindle-seal-and-thrust-washer-kit\" target=\"_blank\"\u003eQK4739\u003c\/a\u003e Front Spindle Seal and Thrust Washer Kit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eTo Install\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eQU40070 is made to fit axle shafts with \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Axle Shaft Slinger and 1-5\/16\" bearing diameters.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eFor applications using QU40070 Thrust Washer are: \u003cbr\u003e\u003ca href=\"\/products\/4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQK4734\u003c\/a\u003e Spindle Bearing\u003cbr\u003e \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003eQU40056\u003c\/a\u003e Small V-Seal\u003cbr\u003e\u003ca href=\"\/products\/40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b\" target=\"_blank\"\u003eQU40071\u003c\/a\u003e Large V-Seal\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Install\u003c\/strong\u003e\u003cbr\u003eInstall QU40070 Thrust Washer with the chamfered side against the axle shaft face (flat side towards the Spindle). Lubricate the Thrust Washer with \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex Plus® synthetic NLGI #2 grease or other suitable water resistant grease.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003emost Mid 1970's to 1993 SUV, 1\/2, and standard 3\/4 ton Model 30, 44, 44IFS, and GM 10 bolt open knuckle front 4x4 drive axles\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eF-250 Crew Cab Dana 60 front axle: 1976, 1977\u003cbr\u003eF150, F250, Bronco, Dana 44, 1978-1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656971264077,"sku":"40070","price":4.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40070_3557_1600__47020_21580__81797.1707861798.1280.1280.png?v=1742510563"},{"product_id":"40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b","title":"QU40071 Large Outer Axle Shaft to Spindle V-Seal Dana 30, 44, GM 10B","description":"\u003cp\u003e\u003cstrong\u003e QU40071 Large Axle Shaft to Spindle V-Seal\u003c\/strong\u003e is a genuine original equipment 2.25\" ID Rubber V-Seal that seals between your axle shaft and spindle. Fits most Mid 1970's to 1993 SUV, 1\/2, and standard 3\/4 ton Model 30, 44, 44IFS, and GM 10 bolt open knuckle front 4x4 drive axles, plus F150, F250, Bronco Dana 44 1978-1979, 1976-1977 F-250 Crew Cab Dana 60 front axle. USA Made.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt\" target=\"_blank\"\u003eQU40228\u003c\/a\u003e Small Spindle Bearing and Seal Kit and \u003ca href=\"\/products\/4739-qk4739-4x4-front-spindle-seal-and-thrust-washer-kit\" target=\"_blank\"\u003eQK4739\u003c\/a\u003e Front Spindle Seal and Thrust Washer Kit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eInstalling\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e QU40071 is made to fit axle shafts with \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Axle Shaft Slinger.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQK4734\u003c\/a\u003e Spindle Bearing Kit\u003cbr\u003e \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003eQU40056\u003c\/a\u003e Small V-Seal\u003cbr\u003e\u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" target=\"_blank\"\u003eQU40070\u003c\/a\u003e Axle Shaft Thrust Washer\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstalling\u003c\/strong\u003e\u003cbr\u003e Install QU40071 V-Seal on \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Axle Shaft Slinger with the flexible lip towards the Spindle. Lubricate the Seal Lip with \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex Plus® synthetic NLGI #2 grease or other suitable water resistant grease.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eMost SUV, 1\/2 and standard 3\/4 ton Model 30, 44, 44IFS: Most mid 1970’s (1973, 1974, 1975, 1976, 1977) 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 19090, 1991, 1992, 1993 including:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e:\u003cbr\u003eWith GM 10 Bolt solid beam front axle: 1977, 1978, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e:\u003cbr\u003eRamcharger, Plymouth Trailduster, W100, W150, W200, W250 with Dana 44 Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Ford\u003c\/strong\u003e:\u003cbr\u003eF-250 Crew Cab with Dana 60 front axle: 1976, 1977\u003cbr\u003eF100, F150, F250, Bronco with Dana 44 Front Axle\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003eScout II with Disc Brakes and Dana 44 Front Axles: 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Jeep\u003c\/strong\u003e:\u003cbr\u003eCherokee, J10, J20, Wagoneer with Dana 44 Front Axle: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656972771405,"sku":"40071","price":12.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40071_A1_cropped_1280__85660.1728508498.1280.1280.jpg?v=1742510580"},{"product_id":"40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt","title":"QU40228 Spindle Bearing and Seal Kit for Dana 30, 44, 44IFS, GM 10 Bolt","description":"\u003cp\u003e\u003cstrong\u003e QU40228 Spindle Bearing and Seal Kit for Dana 30, Dana 44, Dana 44IFS, and GM 10 Bolt Open Knuckle Front Axles\u003c\/strong\u003e includes genuine original equipment spindle bearing, spindle seals, and axle shaft thrust washer to service \u003cem\u003eONE\u003c\/em\u003e Spindle. QU40228 fits most Mid 1970's to 1993 SUV, 1\/2, and standard 3\/4 ton Model 30, 44, 44IFS, and GM 10 bolt open knuckle front axles. Bearing and thrust washer Made in U.S.A., seals imported.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/4739-qk4739-4x4-front-spindle-seal-and-thrust-washer-kit\" target=\"_blank\"\u003eQK4739\u003c\/a\u003e Thrust Washer and Seal Kit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMatching Slinger\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eKit Includes\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpindle Bearing\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eThrust Washer\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Slinger\u003c\/strong\u003e\u003cbr\u003e The matching Axle Shaft Slinger is \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Includes\u003c\/strong\u003e\u003cbr\u003e QU40228 includes one each of these genuine original equipment component parts: \u003cbr\u003eQK4734.5 Spindle Bearing\u003cbr\u003e\u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003eQU40056\u003c\/a\u003e Small V-Seal\u003cbr\u003e\u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" target=\"_blank\"\u003eQU40070\u003c\/a\u003e Axle Shaft Thrust Washer\u003cbr\u003e\u003ca href=\"\/products\/40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b\" target=\"_blank\"\u003eQU40071\u003c\/a\u003e Large V-Seal\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Bearing\u003c\/strong\u003e\u003cbr\u003e For all applications that use this Kit, QK4734.5 Spindle Bearing will be installed so \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003eQU40056\u003c\/a\u003e Small V-Seal will be even with or slightly below the face of the spindle when installed after the bearing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThrust Washer\u003c\/strong\u003e\u003cbr\u003e Install \u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" target=\"_blank\"\u003eQU40070\u003c\/a\u003e Thrust Washer with the chamfered side against the axle shaft face (flat side towards the Spindle). Install \u003ca href=\"\/products\/40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b\" target=\"_blank\"\u003eQU40071\u003c\/a\u003e V-Seal on \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Axle Shaft Slinger with the flexible lip towards the Spindle. Install \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003eQU40056\u003c\/a\u003e V-Seal with the flat face towards the Spindle Bearing. Lubricate the parts with \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex Plus® synthetic NLGI #2 grease or other suitable water resistant grease.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40228 Spindle Bearing and Seal Kit:\u003cbr\u003e\u003ca href=\"\/products\/4739-qk4739-4x4-front-spindle-seal-and-thrust-washer-kit\" target=\"_blank\"\u003eQK4739\u003c\/a\u003e Thrust Washer and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Axle Shaft Slinger\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex Plus® Synthetic NLGI #2 Grease\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003e Suburban Full Size Blazer and Jimmy: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 \u003cbr\u003e K10\/K15\/K1500\/V1500 1\/2 Ton 4x4 Truck: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987 \u003cbr\u003e K20\/K25\/K2500\/V2500 3\/ 4 Ton 4x4 Truck: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003e Ramcharger, Trailduster, W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991. 1992, 1993 \u003cbr\u003e W250 with Dana 44 Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991. 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e Bronco, F100, F150: 1976, 1977, 1978, 1979 \u003cbr\u003e F250 with Dana 44 Front Axle: 1976, 1977, 1978, 1979 \u003cbr\u003e F-150 and Full Size Bronco: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 \u003cbr\u003e F-250 with Dana 44IFS Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e Scout: 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e CJ: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 \u003cbr\u003e Cherokee: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983 \u003cbr\u003e Wagoneer, Grand Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 \u003cbr\u003e J10, J20 Truck: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657467338829,"sku":"40228","price":34.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40228_1_1200_clean__67657_16007__79160.1707884083.1280.1280.jpg?v=1742527880"},{"product_id":"40313-qu40313-dana-44-front-spindle-for-chevy-gmc-dodge-jeep","title":"QU40313 Dana 44 Front Spindle for Chevy, GMC, Dodge, Jeep","description":"\u003cp\u003e\u003cstrong\u003eQU40313 Dana 44 Front Spindle for GM, Dodge, Jeep Dana 44\u003c\/strong\u003e in SUVs, 1\/2 ton, and 3\/4 ton with Dana 44 front axles. Kit includes Spindle, spindle bearing (installed), \u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" rel=\"noopener\" target=\"_blank\"\u003eQU40070\u003c\/a\u003e spindle thrust washer, \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" rel=\"noopener\" target=\"_blank\"\u003eQU40056\u003c\/a\u003e small spindle seal, and \u003ca href=\"\/products\/40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b\" rel=\"noopener\" target=\"_blank\"\u003eQU40071\u003c\/a\u003e large spindle seal. Extend the life of your older truck by replacing your worn or bent spindle while they are still available! See Tech Note 2 for Dodge 1985-1987 Left side Spindle Info. USA Made., except seals are imported.\u003c\/p\u003e \u003cp\u003eAlso Available While Supplies Last: \u003ca href=\"\/products\/5540313-qu40313u-good-used-bare-front-spindle-for-dana-44\" rel=\"noopener\" target=\"_blank\"\u003eQU40313U\u003c\/a\u003e Used Front Spindle\u003c\/p\u003e \u003cp\u003eSee \u003ca href=\"\/products\/440313-y440313-yukon-replacement-dana-44-front-spindle-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eY440313\u003c\/a\u003e Replacement Dana 44 Front Spindle for Dana 44 front axles for a low cost, yet high quality replacement part. Imported.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info?\u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installing\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eDodge 1985-1987\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eGM and Jeep Wheel Bearings\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e1977.5-Earlier\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eDodge Wheel Seals and Wheel Hubs\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eGM Tech Help\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eDodge Standard 44 Dimensions\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eMatching Parts for GM\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003eBefore installing your new spindle, lube the bearing, seals, and thrust washer with \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex® grease. Also, apply some \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" rel=\"noopener\" target=\"_blank\"\u003eS9975\u003c\/a\u003e or \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" rel=\"noopener\" target=\"_blank\"\u003eS81343\u003c\/a\u003e Anti-Seize Compound to the mating surfaces between the spindle and steering knuckle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge 1985-1987\u003c\/strong\u003e\u003cbr\u003eThe dead spindle design of the 1985-1987 Dodge Dana 44 CAD front axle uses a needle bearing to support the right outer axle shaft. On 1985-1987 trucks, no spindle bearing is used on the LEFT side as the left inner axle shaft is supported next to the yoke by \u003ca href=\"\/products\/50155-qu50155-front-axle-transmission-and-transfer-case-roller-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50155\u003c\/a\u003e Bearing. Instead of a bearing, a Seal Retainer (which is no longer available) is installed in the left spindle. The Spindle itself is the same. If you need to replace the left spindle on your 1985-1987 truck, remove the needle bearing from your new spindle and install the Seal retainer from your old spindle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGM and Jeep Wheel Bearings\u003c\/strong\u003e\u003cbr\u003eSome early 1977 1\/2 ton GM and Jeep 4x4s with Dana 44 front axles used \u003ca href=\"\/products\/9940593-qa40593-dana-44-front-spindle-kit-for-gm-jeep-1971-1977-5\" rel=\"noopener\" target=\"_blank\"\u003eQA40593\u003c\/a\u003e spindle that takes smaller inner wheel bearings. QU40313 spindle is made for \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e inner wheel bearing which has an inside diameter of 2.00\". For the 1971-1977.5 GM 1\/2 ton spindle, see \u003ca href=\"\/products\/9940593-qa40593-dana-44-front-spindle-kit-for-gm-jeep-1971-1977-5\" rel=\"noopener\" target=\"_blank\"\u003eQA40593\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1977.5-Earlier\u003c\/strong\u003e\u003cbr\u003eSome early 1977 3\/4 ton GM and Jeep J20 4x4s with Dana 44 front axles may have had a wheel hub that used six 3\/8\" diameter bolts to secure the lockout hub or drive flange to the wheel hub. QU40313 Spindle WILL NOT fit those early 1977 and prior 3\/4 tons with the external mount hub! For the 1971-1977.5 GM and Jeep 3\/4 ton spindle, see \u003ca href=\"\/products\/40323-qu40323-3-4-ton-dana-44-front-spindle-assembly\" rel=\"noopener\" target=\"_blank\"\u003eQU40323\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge Wheel Seals and Wheel Hubs\u003c\/strong\u003e\u003cbr\u003eDodge used the same wheel bearings and same base spindle for all 1980-1993 Dana 44 front axles. However, different wheel seals and wheel hubs are used. 1980-1984 hubs have a 3-1\/4\" seal bore diameter, 1985-1993 hubs have a 3-5\/16\" seal bore diameter.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGM Tech Help\u003c\/strong\u003e\u003cbr\u003eNeed Tech Help for servicing your wheel bearings? Get my tech publication: \u003ca href=\"\/products\/774715-tsb4715-front-wheel-bearing-service-for-1977-1991-gm\" rel=\"noopener\" target=\"_blank\"\u003eTSB4715\u003c\/a\u003e \u003cem\u003eFront Wheel Bearing Service for 1977½-1991 GM Full Size SUV's, 1\/2 Ton, and 3\/4 Ton Trucks with Manual Locking Hubs\u003c\/em\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge Standard 44 Dimensions\u003c\/strong\u003e\u003cbr\u003eThe standard front axle on 1985-1993 Dodge W-250 3\/4 ton 4x4 trucks with gasoline engines is a Dana 44 beam type front axle with Gross Axle Weight Rating (GAWR) of 3500 pounds. The end of the wheel hub measures about 3-5\/8\" in diameter and the spindle thread is 1-5\/8\". Standard on the diesel W-250 and optional on the gas W-250 was the 4500 pound rated Dana 60 front axle which has a front wheel hub that measures about 4-1\/8\" at the outer end and a 2\" spindle thread.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for GM\u003c\/strong\u003e\u003cbr\u003eMatching Parts and Tools for QU40313 Front Spindle Kit:\u003cbr\u003e\u003ca href=\"\/products\/40054-qu40054-3-8-sae-x-1-1-2-long-front-spindle-to-knuckle-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40054\u003c\/a\u003e Spindle Mounting Stud 1973-1991 \u003cbr\u003e\u003ca href=\"\/products\/30191-qu30191-1-2-ton-4x4-front-wheel-hub-for-1977-5-91-chevy-gm-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU30191\u003c\/a\u003e New 6 Bolt Wheel Hub for 1977.5-1991 Blazer, Jimmy, 1\/2 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/30194-qu30194-3-4-ton-4x4-front-wheel-hub-for-1977-5-91-chevy-gm-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU30194\u003c\/a\u003e New 8 Bolt Wheel Hub for 1977.5-1991 3\/4 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/50834-qu50834-1977-5-1991-3-4-ton-hub-and-rotor-for-gm-or-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU50834\u003c\/a\u003e New 8 Bolt Hub and Rotor Assembly for 1977.5-1991 3\/4 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/664715-tk4715-torque-king-master-wheel-bearing-parts-and-tools-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK4715\u003c\/a\u003e\/\u003ca href=\"\/products\/270-tk4743-torque-king-wheel-bearing-parts-kits-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eTK4743\u003c\/a\u003e Wheel Bearing Kits with Timken® Bearings\u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Timken® Outer Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Timken® Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50446\u003c\/a\u003e Timken® Inner Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e Timken® Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" rel=\"noopener\" target=\"_blank\"\u003eQU50091\u003c\/a\u003e Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e Round 4 Slot Spindle Nut Kit for vehicles with Automatic Hubs\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft \u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" rel=\"noopener\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/774715-tsb4715-front-wheel-bearing-service-for-1977-1991-gm\" rel=\"noopener\" target=\"_blank\"\u003eTSB4715\u003c\/a\u003e Front Wheel Bearing Tech Service Bulletin\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" rel=\"noopener\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for Dodge\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/5511205-qu11205u-used-5-bolt-front-wheel-hub-for-1985-1993-dodge-plymouth-1-2-ton\" rel=\"noopener\" target=\"_blank\"\u003eQU11205U\u003c\/a\u003e Used 5 Bolt Wheel Hub for 1985-1993 Ramcharger, Trailduster, W150\u003cbr\u003e\u003ca href=\"\/products\/5511197-qu11197u-used-1985-1993-8-bolt-front-wheel-hub-for-dodge-3-4-ton\" rel=\"noopener\" target=\"_blank\"\u003eQU11197U\u003c\/a\u003e Used 8 Bolt Wheel Hub for 1985-1993 W250\u003cbr\u003e\u003ca href=\"\/products\/664715-tk4715-torque-king-master-wheel-bearing-parts-and-tools-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK4715\u003c\/a\u003e\/\u003ca href=\"\/products\/270-tk4743-torque-king-wheel-bearing-parts-kits-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eTK4743\u003c\/a\u003e 1980-1984 Wheel Bearing Kits\u003cbr\u003e\u003ca href=\"\/products\/4709-tk4709d-master-wheel-bearing-kit-with-tools-for-1985-1993-dodge\" rel=\"noopener\" target=\"_blank\"\u003eTK4709D\u003c\/a\u003e\/\u003ca href=\"\/products\/4752-tk4752-dana-44-front-wheel-bearing-and-seal-kit-for-dodge-and-ford\" rel=\"noopener\" target=\"_blank\"\u003eTK4752\u003c\/a\u003e 1985-1993 Wheel Bearing Kits\u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Timken® Outer Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Timken® Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50446\u003c\/a\u003e Timken® Inner Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e Timken® Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" rel=\"noopener\" target=\"_blank\"\u003eQU50091\u003c\/a\u003e 1980-1984 Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU90001\u003c\/a\u003e 1985-1993 Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" rel=\"noopener\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" rel=\"noopener\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003cbr\u003e\u003c\/strong\u003e1\/2 and 3\/4 ton truck plus Blazer, Jimmy, and Suburban: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBlazer, Jimmy, plus 1\/2 and 3\/4 ton Suburban: 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eRamcharger, Trailduster, W100, W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW-250 with Dana 44 Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJeep J-Series Cherokee, Wagoneer, and Truck: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657565151309,"sku":"40313","price":333.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40313__98861_9200__95144.1707887341.1280.1280.jpg?v=1742530323"},{"product_id":"40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt","title":"QU40429 Tabbed Spindle Nut Lockwasher for Dana 44 and GM 10 Bolt","description":"\u003cp\u003e\u003cstrong\u003e QU40429 Tabbed Spindle Lock Washer\u003c\/strong\u003e is a genuine original equipment part for Dana 44 (Dodge, Ford), GM 10 Bolt (Chevy\/GMC) front drive axles. This washer was used between the inner and outer spindle nuts on many SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings. GM used QU40429 from 1982 to 1991, Ford Dana 44IFS axles had QU40429 off and on from 1981 to 1996. Dodge used it from 1980-1984. USA Made. Sold individually. \u003cspan style=\"color: #ff0000\"\u003eLimited Supply.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e Spindle Nut Kit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eHubs\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eFits 1-5\/8” Thread Dia.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHubs\u003c\/strong\u003e\u003cbr\u003eQU40429 was mainly used on vehicles with available automatic locking hubs. The four tabs engaged 4 slots in the automatic hub body. For trucks with manual locking hubs, QU40429 is interchangeable with \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" rel=\"noopener\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits 1-5\/8” Thread Dia.\u003c\/strong\u003e\u003cbr\u003eQU40429 Spindle Washer fits spindles with thread diameters of 1-5\/8”.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e \u003cbr\u003eDana 44 SUVs, ½ ton and ¾ ton, and GM 10 Bolt: \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge: \u003c\/strong\u003e1980, 1981, 1982, 1983, 1984\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e 1981, 1982, 1983, 1984\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy, GM: \u003c\/strong\u003e1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657742786637,"sku":"40429","price":49.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40429_1600__96725.1728683938.1280.1280.png?v=1742534864"},{"product_id":"50750-qu50750-dana-front-spindle-to-knuckle-bolt","title":"QU50750 Dana Front Spindle to Knuckle Bolt","description":"\u003cp\u003e\u003cstrong\u003eQU50750 Dana Front Spindle to Knuckle Bolt \u003c\/strong\u003e is a genuine original equipment Dana Knuckle Bolt that fits many 1970's to 1990's Chevy, Dodge, GMC, IHC, and Jeep front axles with disc brakes. A flat on the bolt head provides clearance for the spindle to fit into the knuckle. Serrated shank resists spinning when removing or installing the spindle retaining nut. QU50750 is used on both Dana 30 (Scout, Jeep CJ) and Dana 44 (Chevy, Dodge, GMC) front axles. Sold individually.\u003c\/p\u003e \u003cp\u003eNOTE: QU50750 is out of production. We have a limited supply of this part. When this is out of stock, \u003ca href=\"\/products\/40054-qu40054-3-8-sae-x-1-1-2-long-front-spindle-to-knuckle-bolt\" target=\"_blank\"\u003eQU40054\u003c\/a\u003e Spindle Bolt is still available. It is a little over 1\/8\" longer than QU50750. \u003ca href=\"\/products\/40054-qu40054-3-8-sae-x-1-1-2-long-front-spindle-to-knuckle-bolt\" target=\"_blank\"\u003eQU40054\u003c\/a\u003e could be used to replace QU50750 if you shorten the threaded end.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBolt Specs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eIf Too Short\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBolt Specs\u003c\/strong\u003e\u003cbr\u003eQU50750 has 3\/8\" SAE threads. The usable length from inside face of head to end of threads is approximately 1-5\/16\". Overall length is 1-17\/32\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIf Too Short\u003c\/strong\u003e\u003cbr\u003eIf QU50750 is too short for your application, see \u003ca href=\"\/products\/40054-qu40054-3-8-sae-x-1-1-2-long-front-spindle-to-knuckle-bolt\" target=\"_blank\"\u003eQU40054\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eBlazer, Jimmy, K10, K15, K20, K25: 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\/Plymouth Dana 44 Front Axles:\u003c\/strong\u003e\u003cbr\u003eW150, Ramcharger, Trailduster: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW250 with gasoline engine: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e Specific year\/models not verified\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ-5: 1979, 1980, 1981, 1982, 1983\u003cbr\u003eCJ-6: 1979, 1980, 1981\u003cbr\u003eCJ-7: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eScrambler: 1981, 1982, 1983, 1984, 1985, 1986\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41658313015373,"sku":"50750","price":6.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu50750__07153_10289__84678.1707899775.1280.1280.jpg?v=1742546520"},{"product_id":"440313-y440313-yukon-replacement-dana-44-front-spindle-for-chevy-gmc-dodge-jeep","title":"Y440313 Yukon Replacement Dana 44 Front Spindle for Chevy, GMC, Dodge, Jeep","description":"\u003cp\u003e\u003cstrong\u003eY440313 Yukon Replacement Dana 44 Front Spindle for GM, Dodge, Jeep Dana 44\u003c\/strong\u003e in SUVs, 1\/2 ton, and 3\/4 ton with Dana 44 front axles. Kit includes Spindle, spindle bearing (installed), spindle thrust washer, small spindle seal, and large spindle seal. Extend the life of your older truck by replacing your worn or bent spindle! See Tech Note 2 for Dodge 1985-1987 Left side Spindle Info. Imported.\u003c\/p\u003e \u003cp\u003eAlso Available While Supplies Last: \u003ca href=\"\/products\/5540313-qu40313u-good-used-bare-front-spindle-for-dana-44\" rel=\"noopener\" target=\"_blank\"\u003eQU40313U\u003c\/a\u003e Used Front Spindle\u003c\/p\u003e \u003cp\u003e\u003cem\u003eNote: \u003ca href=\"\/products\/40313-qu40313-dana-44-front-spindle-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU40313\u003c\/a\u003e New OE Spindle is sold out and no longer available.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info?\u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installing\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eDodge 1985-1987\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eGM and Jeep Wheel Bearings\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e1977.5-Earlier\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eDodge Wheel Seals and Wheel Hubs\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eGM Tech Help\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eDodge Standard 44 Dimensions\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eMatching Parts for GM\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003eBefore installing your new spindle, lube the bearing, seals, and thrust washer with \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex® grease. Also, apply some \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" rel=\"noopener\" target=\"_blank\"\u003eS9975\u003c\/a\u003e or \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" rel=\"noopener\" target=\"_blank\"\u003eS81343\u003c\/a\u003e Anti-Seize Compound to the mating surfaces between the spindle and steering knuckle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge 1985-1987\u003c\/strong\u003e\u003cbr\u003eThe dead spindle design of the 1985-1987 Dodge Dana 44 CAD front axle uses a needle bearing to support the right outer axle shaft. On 1985-1987 trucks, no spindle bearing is used on the LEFT side as the left inner axle shaft is supported next to the yoke by \u003ca href=\"\/products\/50155-qu50155-front-axle-transmission-and-transfer-case-roller-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50155\u003c\/a\u003e Bearing. Instead of a bearing, a Seal Retainer (which is no longer available) is installed in the left spindle. The Spindle itself is the same. If you need to replace the left spindle on your 1985-1987 truck, remove the needle bearing from your new spindle and install the Seal retainer from your old spindle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGM and Jeep Wheel Bearings\u003c\/strong\u003e\u003cbr\u003eSome early 1977 1\/2 ton GM and Jeep 4x4s with Dana 44 front axles used \u003ca href=\"\/products\/9940593-qa40593-dana-44-front-spindle-kit-for-gm-jeep-1971-1977-5\" rel=\"noopener\" target=\"_blank\"\u003eQA40593\u003c\/a\u003e spindle that takes smaller inner wheel bearings. Y440313 spindle is made for \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e inner wheel bearing which has an inside diameter of 2.00\". For the 1971-1977.5 GM 1\/2 ton spindle, see \u003ca href=\"\/products\/9940593-qa40593-dana-44-front-spindle-kit-for-gm-jeep-1971-1977-5\" rel=\"noopener\" target=\"_blank\"\u003eQA40593\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1977.5-Earlier\u003c\/strong\u003e\u003cbr\u003eSome early 1977 3\/4 ton GM and Jeep J20 4x4s with Dana 44 front axles may have had a wheel hub that used six 3\/8\" diameter bolts to secure the lockout hub or drive flange to the wheel hub. Y440313 Spindle WILL NOT fit those early 1977 and prior 3\/4 tons with the external mount hub! For the 1971-1977.5 GM and Jeep 3\/4 ton spindle, see \u003ca href=\"\/products\/40323-qu40323-3-4-ton-dana-44-front-spindle-assembly\" rel=\"noopener\" target=\"_blank\"\u003eQU40323\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge Wheel Seals and Wheel Hubs\u003c\/strong\u003e\u003cbr\u003eDodge used the same wheel bearings and same base spindle for all 1980-1993 Dana 44 front axles. However, different wheel seals and wheel hubs are used. 1980-1984 hubs have a 3-1\/4\" seal bore diameter, 1985-1993 hubs have a 3-5\/16\" seal bore diameter.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGM Tech Help\u003c\/strong\u003e\u003cbr\u003eNeed Tech Help for servicing your wheel bearings? Get my tech publication: \u003ca href=\"\/products\/774715-tsb4715-front-wheel-bearing-service-for-1977-1991-gm\" rel=\"noopener\" target=\"_blank\"\u003eTSB4715\u003c\/a\u003e \u003cem\u003eFront Wheel Bearing Service for 1977½-1991 GM Full Size SUV's, 1\/2 Ton, and 3\/4 Ton Trucks with Manual Locking Hubs\u003c\/em\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge Standard 44 Dimensions\u003c\/strong\u003e\u003cbr\u003eThe standard front axle on 1985-1993 Dodge W-250 3\/4 ton 4x4 trucks with gasoline engines is a Dana 44 beam type front axle with Gross Axle Weight Rating (GAWR) of 3500 pounds. The end of the wheel hub measures about 3-5\/8\" in diameter and the spindle thread is 1-5\/8\". Standard on the diesel W-250 and optional on the gas W-250 was the 4500 pound rated Dana 60 front axle which has a front wheel hub that measures about 4-1\/8\" at the outer end and a 2\" spindle thread.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for GM\u003c\/strong\u003e\u003cbr\u003eMatching Parts and Tools for Y440313 Front Spindle Kit:\u003cbr\u003e\u003ca href=\"\/products\/40054-qu40054-3-8-sae-x-1-1-2-long-front-spindle-to-knuckle-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40054\u003c\/a\u003e Spindle Mounting Stud 1973-1991 \u003cbr\u003e\u003ca href=\"\/products\/30191-qu30191-1-2-ton-4x4-front-wheel-hub-for-1977-5-91-chevy-gm-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU30191\u003c\/a\u003e New 6 Bolt Wheel Hub for 1977.5-1991 Blazer, Jimmy, 1\/2 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/30194-qu30194-3-4-ton-4x4-front-wheel-hub-for-1977-5-91-chevy-gm-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU30194\u003c\/a\u003e New 8 Bolt Wheel Hub for 1977.5-1991 3\/4 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/50834-qu50834-1977-5-1991-3-4-ton-hub-and-rotor-for-gm-or-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU50834\u003c\/a\u003e New 8 Bolt Hub and Rotor Assembly for 1977.5-1991 3\/4 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/664715-tk4715-torque-king-master-wheel-bearing-parts-and-tools-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK4715\u003c\/a\u003e\/\u003ca href=\"\/products\/270-tk4743-torque-king-wheel-bearing-parts-kits-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eTK4743\u003c\/a\u003e Wheel Bearing Kits with Timken® Bearings\u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Timken® Outer Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Timken® Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50446\u003c\/a\u003e Timken® Inner Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e Timken® Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" rel=\"noopener\" target=\"_blank\"\u003eQU50091\u003c\/a\u003e Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e Round 4 Slot Spindle Nut Kit for vehicles with Automatic Hubs\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft \u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" rel=\"noopener\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/774715-tsb4715-front-wheel-bearing-service-for-1977-1991-gm\" rel=\"noopener\" target=\"_blank\"\u003eTSB4715\u003c\/a\u003e Front Wheel Bearing Tech Service Bulletin\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" rel=\"noopener\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for Dodge\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/5511205-qu11205u-used-5-bolt-front-wheel-hub-for-1985-1993-dodge-plymouth-1-2-ton\" rel=\"noopener\" target=\"_blank\"\u003eQU11205U\u003c\/a\u003e Used 5 Bolt Wheel Hub for 1985-1993 Ramcharger, Trailduster, W150\u003cbr\u003e\u003ca href=\"\/products\/5511197-qu11197u-used-1985-1993-8-bolt-front-wheel-hub-for-dodge-3-4-ton\" rel=\"noopener\" target=\"_blank\"\u003eQU11197U\u003c\/a\u003e Used 8 Bolt Wheel Hub for 1985-1993 W250\u003cbr\u003e\u003ca href=\"\/products\/664715-tk4715-torque-king-master-wheel-bearing-parts-and-tools-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK4715\u003c\/a\u003e\/\u003ca href=\"\/products\/270-tk4743-torque-king-wheel-bearing-parts-kits-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eTK4743\u003c\/a\u003e 1980-1984 Wheel Bearing Kits\u003cbr\u003e\u003ca href=\"\/products\/4709-tk4709d-master-wheel-bearing-kit-with-tools-for-1985-1993-dodge\" rel=\"noopener\" target=\"_blank\"\u003eTK4709D\u003c\/a\u003e\/\u003ca href=\"\/products\/4752-tk4752-dana-44-front-wheel-bearing-and-seal-kit-for-dodge-and-ford\" rel=\"noopener\" target=\"_blank\"\u003eTK4752\u003c\/a\u003e 1985-1993 Wheel Bearing Kits\u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Timken® Outer Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Timken® Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50446\u003c\/a\u003e Timken® Inner Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e Timken® Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" rel=\"noopener\" target=\"_blank\"\u003eQU50091\u003c\/a\u003e 1980-1984 Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU90001\u003c\/a\u003e 1985-1993 Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" rel=\"noopener\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" rel=\"noopener\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003cbr\u003e\u003c\/strong\u003e1\/2 and 3\/4 ton truck plus Blazer, Jimmy, and Suburban: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBlazer, Jimmy, plus 1\/2 and 3\/4 ton Suburban: 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eRamcharger, Trailduster, W100, W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW-250 with Dana 44 Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJeep J-Series Cherokee, Wagoneer, and Truck: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Randys R P","offers":[{"title":"Default Title","offer_id":41658833076301,"sku":"440313","price":406.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/y440313_1_1200_clean__25046_14662__13333.1707908063.1280.1280.jpg?v=1778715325"},{"product_id":"554727-qa4727u-good-used-4-slot-front-spindle-nut-kit","title":"QA4727U Good Used 4 Slot Front Spindle Nut Kit","description":"\u003cp\u003e\u003cstrong\u003eQA4727U Good Used 4 Slot Front Spindle Nut Kit \u003c\/strong\u003eincludes one each \u003ca href=\"\/products\/5540004-qu40004u-good-used-4x4-front-inner-spindle-nut-with-pin\" target=\"_blank\"\u003eQU40004U\u003c\/a\u003e Inner Spindle Nut, \u003ca href=\"\/products\/5540060-qu40060u-good-used-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060U\u003c\/a\u003e Spindle Nut Lock Washer, and \u003ca href=\"\/products\/5540031-qu40031u-used-outer-4-slot-4x4-front-spindle-nut\" target=\"_blank\"\u003eQU40031U\u003c\/a\u003e Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC), and 1974-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This nut was used as the inner spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974. Jeep J-series full size 4x4s also used these parts from 1973-1989. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e New 4 Slot Front Spindle Nut Kit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFitment\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eTool\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eQA4727U Spindle Nut Kit fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThe pin that protrudes from the outboard face of \u003ca href=\"\/products\/5540004-qu40004u-good-used-4x4-front-inner-spindle-nut-with-pin\" target=\"_blank\"\u003eQU40004U\u003c\/a\u003e Inner Spindle Nut is an anti-rotation device that engages with one of the holes in \u003ca href=\"\/products\/5540060-qu40060u-good-used-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060U\u003c\/a\u003e Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton and 3\/4 ton trucks with Dana 44 or GM 10 Bolt front axles with serviceable wheel bearings: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton ton trucks with Dana 44 front axle and serviceable wheel bearings: 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e:\u003cbr\u003eBroncos with Dana 30 front axle : 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eBronco with Dana 44 Front Axle: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF100, F150, F250 1\/2 ton and 3\/4 ton trucks with standard Dana 44 front axle and serviceable wheel bearings: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF250 Crew Cab Dana 60 Front Axle: 1974, 1975, 1976, 1977\u003cbr\u003eF150, Bronco with Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with Dana 44IFS Front Axle, Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton 1100 and 1110 series 4x4: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series Full Size 4x4s:\u003c\/strong\u003e\u003cbr\u003eWagoneer, Cherokee, Cherokee Chief, J10, J20 Dana 44 front axles: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41659665547341,"sku":"554727","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qa4727clean__52180_7273__62350.1707918634.1280.1280.jpg?v=1742633035"},{"product_id":"554770-qk4770u-used-front-4x4-spindle-nut-and-washer-set","title":"QK4770U Used Front 4x4 Spindle Nut and Washer Set","description":"\u003cp\u003e\u003cstrong\u003e QK4770U Used Front 4x4 Spindle Nut and Washer Set\u003c\/strong\u003e for Dana 44 (Dodge, Ford), GM 10 Bolt (Chevy\/GMC) front drive axles. This Set was used on many SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings. GM used \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e from 1982 to 1991, Ford Dana 44IFS axles had \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e off and on from 1981 to 1996. Dodge used it from 1980-1984. Available While Supplies Last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAlso See: \u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e New Front 4x4 Spindle Nut and Washer Set\u003c\/strong\u003e USA Made\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut Kit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eAutomatic Locking Hubs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eFits 1-5\/8” Thread Dia.\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003ePin\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAutomatic Locking Hubs\u003c\/strong\u003e\u003cbr\u003e QK4770 was mainly used on vehicles with available automatic locking hubs. The four tabs on \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Washer engaged 4 slots in the automatic hub body.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits 1-5\/8” Thread Dia.\u003c\/strong\u003e\u003cbr\u003e QK4770U fits spindles with thread diameters of 1-5\/8\". The component parts are: \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut, \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Spindle Nut Lock Washer, and \u003ca href=\"\/products\/40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread\" target=\"_blank\"\u003eQU40031\u003c\/a\u003e Outer Spindle Nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePin\u003c\/strong\u003e\u003cbr\u003e The pin that protrudes from the outboard face of \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut is an anti-rotation device that engages with one of the holes in \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e Dana 44 SUVs, ½ ton and ¾ ton, and GM 10 Bolt \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDodge: \u003c\/strong\u003e1980, 1981, 1982, 1983, 1984\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e Off and on from 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy, GM\u003c\/strong\u003e 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41659671445581,"sku":"554770","price":45.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4770u_1_1200_clean__81115_16457__65834.1707918786.1280.1280.jpg?v=1742633353"},{"product_id":"9840313-qu40313gm-dana-44-gm-10-bolt-front-spindle","title":"QU40313GM Dana 44 \u0026 GM 10 Bolt Front Spindle","description":"\u003cp\u003eThis part has superseded to \u003ca href=\"\/products\/40313-qu40313-dana-44-front-spindle-for-chevy-gmc-dodge-jeep\"\u003eQU40313\u003c\/a\u003e\u003c\/p\u003e \u003cdiv class=\"col-md-8\"\u003e \u003cp\u003e\u003cstrong\u003eQU40313GM Dana 44 \u0026amp; GM 10 Bolt Front Spindle for 1977.5-1991 Chevy, GMC full size 4x4s \u003c\/strong\u003eis a genuine original equipment replacement part for Blazer, Jimmy, K10, K15, K1500, V1500, K20, K25, K2500, V2500 4x4s with internally splined front wheel hubs. Kit includes Spindle, \u003ca href=\"\/products\/4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQK4734.5 \u003c\/a\u003espindle bearing (installed), \u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" rel=\"noopener\" target=\"_blank\"\u003eQU40070 \u003c\/a\u003espindle thrust washer, \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" rel=\"noopener\" target=\"_blank\"\u003eQU40056 \u003c\/a\u003esmall spindle seal, and \u003ca href=\"\/products\/40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b\" rel=\"noopener\" target=\"_blank\"\u003eQU40071 \u003c\/a\u003elarge spindle seal.  Extend the life of your classic GM 4x4 by replacing your worn or bent spindle while they are still available!  Made in U.S.A., except seals are imported.\u003c\/p\u003e \u003cp\u003eAlso Available While Supplies Last: QU4013GMU Used 4x4 Front Spindle\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/440313-y440313-yukon-replacement-dana-44-front-spindle-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eY440313\u003c\/a\u003e Replacement Front Spindle for 1977.5-1991 Chevy, GMC full size 4x4's is a low cost, yet high quality replacement part. Imported.\u003c\/p\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eWheel Bearings\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e1977.5-Earlier\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eBefore Installing\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eTech Help\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWheel Bearings\u003c\/strong\u003e\u003cbr\u003eSome early 1977 1\/2 ton GM 4x4s with Dana 44 front axles used \u003ca href=\"\/products\/9940593-qa40593-dana-44-front-spindle-kit-for-gm-jeep-1971-1977-5\" rel=\"noopener\" target=\"_blank\"\u003eQA40593\u003c\/a\u003e spindle that takes smaller inner wheel bearings. \u003ca href=\"\/products\/40313-qu40313-dana-44-front-spindle-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU40313\u003c\/a\u003e spindle is made for \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e inner wheel bearing which has an inside diameter of 2.00\". For the 1971-1977.5 1\/2 ton spindle, see \u003ca href=\"\/products\/9940593-qa40593-dana-44-front-spindle-kit-for-gm-jeep-1971-1977-5\" rel=\"noopener\" target=\"_blank\"\u003eQA40593\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1977.5-Earlier\u003c\/strong\u003e\u003cbr\u003eSome early 1977 3\/4 ton GM 4x4s with Dana 44 front axles may have had a wheel hub that used six 3\/8\" diameter bolts to secure the lockout hub or drive flange to the wheel hub. QU40313GM Spindle WILL NOT fit those early 1977 and prior 3\/4 tons with the external mount hub! For the 1971-1977.5 3\/4 ton spindle, see \u003ca href=\"\/products\/40323-qu40323-3-4-ton-dana-44-front-spindle-assembly\" rel=\"noopener\" target=\"_blank\"\u003eQU40323\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003eBefore installing your new spindle, lube the bearing, seals, and thrust washer with \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex® grease. Also, apply some Anti-Seize Compound to the mating surfaces between the spindle and steering knuckle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTech Help\u003c\/strong\u003e\u003cbr\u003eNeed Tech Help for servicing your wheel bearings? Get my tech publication: \u003ca href=\"\/products\/774715-tsb4715-front-wheel-bearing-service-for-1977-1991-gm\" rel=\"noopener\" target=\"_blank\"\u003eTSB4715 \u003c\/a\u003e\u003cem\u003eFront Wheel Bearing Service for 1977½-1991 GM Full Size SUV's, 1\/2 Ton, and 3\/4 Ton Trucks with Manual Locking Hubs\u003c\/em\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts and Tools for QU40313 Front Spindle Kit:\u003cbr\u003e\u003ca href=\"\/products\/40054-qu40054-3-8-sae-x-1-1-2-long-front-spindle-to-knuckle-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40054 \u003c\/a\u003eSpindle Mounting Stud 1973-1991 \u003cbr\u003e\u003ca href=\"\/products\/30191-qu30191-1-2-ton-4x4-front-wheel-hub-for-1977-5-91-chevy-gm-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU30191 \u003c\/a\u003eNew 6 Bolt Wheel Hub for 1977.5-1991 Blazer, Jimmy, 1\/2 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/30194-qu30194-3-4-ton-4x4-front-wheel-hub-for-1977-5-91-chevy-gm-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU30194 \u003c\/a\u003eNew 8 Bolt Wheel Hub for 1977.5-1991 3\/4 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/50834-qu50834-1977-5-1991-3-4-ton-hub-and-rotor-for-gm-or-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU50834 \u003c\/a\u003eNew 8 Bolt Hub and Rotor Assembly for 1977.5-1991 3\/4 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/664715-tk4715-torque-king-master-wheel-bearing-parts-and-tools-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK4715\u003c\/a\u003e\/\u003ca href=\"\/products\/270-tk4743-torque-king-wheel-bearing-parts-kits-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eTK4743 \u003c\/a\u003eWheel Bearing Kits with Timken® Bearings\u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50447 \u003c\/a\u003eTimken® Outer Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken® Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50446 \u003c\/a\u003eTimken® Inner Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412 \u003c\/a\u003eTimken® Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" rel=\"noopener\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eWheel Seal\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003eRound, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4770 \u003c\/a\u003eRound 4 Slot Spindle Nut Kit for vehicles with Automatic Hubs\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40221 \u003c\/a\u003eOuter Axle Shaft \u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003eProtection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" rel=\"noopener\" target=\"_blank\"\u003eQT1025 \u003c\/a\u003e4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/774715-tsb4715-front-wheel-bearing-service-for-1977-1991-gm\" rel=\"noopener\" target=\"_blank\"\u003eTSB4715 \u003c\/a\u003eFront Wheel Bearing Tech Service Bulletin\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications:\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003e1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987 1\/2 and 3\/4 ton truck plus Blazer, Jimmy, and Suburban\u003cbr\u003e1988, 1989, 1990, 1991 Blazer, Jimmy, plus 1\/2 and 3\/4 ton Suburban\u003cbr\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41660226306125,"sku":"9840313","price":260.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40313gm__38941_9201__41084.1707925149.1280.1280.jpg?v=1742668169"},{"product_id":"991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt","title":"Dana 30\/44 4-Lug 4x4 Front Spindle Nut Socket QT1012i","description":"\u003cp\u003e\u003cstrong\u003eQT1012i Value 4 Lug 4x4 Front Spindle Nut Socket\u003c\/strong\u003e is a durable, 1\/2\" drive special socket that fits 4 slot spindle nuts used on many axles from the late 1950's to 1996 including Dana 28IFS, Dana 30, Dana 35IFS, Dana 44, Dana 44IFS, Dana 60, and GM 10 Bolt front axles. Services both double nut and Ford ratchet type single nut configurations. Imported.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eTool Options\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool Options\u003c\/strong\u003e\u003cbr\u003eIf you do 4x4 front axle service that includes 1985 to 1992 Ford F-150 and full-size Bronco with 1-5\/8\" thread ratchet type spindle nuts, this is the socket you need. For all other applications that have either 38mm or 1-5\/8\" spindle threads with 4 slot nuts that measure approximately 2-3\/16\" to 2-1\/4\" in diameter, you can also use \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Universal Spindle Nut Socket. For 1980 and newer Dana 50IFS and Dana 60 front axles with 2\" spindle threads and 4 slot spindle nuts, see \u003ca href=\"\/products\/1018-qt1018-usa-made-4-lug-spindle-nut-socket-dana-50ifs-dana-60-axles\" target=\"_blank\"\u003eQT1018\u003c\/a\u003e or \u003ca href=\"\/products\/1110-qt1110-usa-made-4-lug-spindle-nut-socket-dana-50-dana-60-front-axles\" target=\"_blank\"\u003eQT1110\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003e Blazer, Jimmy, Suburban, K10\/15, and K20\/25 All with either Dana 44 or GM 10 Bolt Front Axles\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003e Bronco II, Ranger Pickup, Explorer (manual hubs only)\u003cbr\u003e Bronco\u003cbr\u003eF100, F150, and F250 with Dana 44 or Dana 44IFS axles (does not fit most auto hub applications)\u003cbr\u003e F-250 Crew Cab with Dana 60: 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eRamcharger, W150, W250 (except diesel): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003eFull Size Wagoneer, Cherokee, J10 and J20: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e 1100\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41660316975181,"sku":"991012","price":21.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1012i_1_1200_clean__52235_15675__64180.1707927162.1280.1280.jpg?v=1742674905"},{"product_id":"5540004-qu40004u-good-used-4x4-front-inner-spindle-nut-with-pin","title":"QU40004U Good Used 4x4 Front Inner Spindle Nut with Pin","description":"\u003cp\u003e\u003cstrong\u003eQU40004U Good Used 4x4 Front Inner Spindle Nut with Pin\u003c\/strong\u003e is a good used genuine original equipment part for many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 closed knuckle front drive axles. This nut was used as the inner spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1980 to 1993, Jeep J-series full size 4x4s had it from 1973-1989. Available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eThread Diameter\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003ePin Engagement\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSocket\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThread Diameter\u003c\/strong\u003e\u003cbr\u003eQU40004U Used Spindle Nut fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePin Engagement\u003c\/strong\u003e\u003cbr\u003eThe pin that protrudes from the outboard face is an anti-rotation device that engages with one of the holes in either \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e or \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Spindle Lock Washers. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSocket\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMost SUVs\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC GM:\u003cbr\u003e\u003c\/strong\u003e1\/2 Ton \u0026amp; 3\/4 Ton Pickups with Dana 44 Front Axles\u003cbr\u003eGM 10 Bolt Front Axle\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge Dana 44 Front Axles:\u003c\/strong\u003e\u003cbr\u003e1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003e1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003e\u003c\/strong\u003eFord Bronco, Many Dana 30\u003cbr\u003eDana 44 Front Axles\u003cbr\u003eF-250 Crew Cab Dana 60 Closed Knuckle Front Drive Axles: 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series Full Size 4x4s with Dana 44 Front Axles:\u003c\/strong\u003e\u003cbr\u003e1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660419309645,"sku":"5540004","price":6.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40004u_2_1200_clean__92643_16393__25631.1707933971.1280.1280.jpg?v=1742682854"},{"product_id":"5540031-qu40031u-used-outer-4-slot-4x4-front-spindle-nut","title":"QU40031U USED Outer 4 Slot 4x4 Front Spindle Nut","description":"\u003cp\u003e\u003cstrong\u003eQU40031U USED Outer 4 Slot 4x4 Front Spindle Nut\u003c\/strong\u003e is a used part for Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This 1-5\/8\" thread nut was used as the outer spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1980 to 1993, Jeep J-series full-size 4x4s had it from 1973-1989.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e and \u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e Spindle Nut Kits\u003cbr\u003eAlso See: \u003ca href=\"\/products\/40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread\" target=\"_blank\"\u003eQU40031\u003c\/a\u003e New Outer 4 Slot Spindle Nut\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eSpindle Nut Sockets\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eQU40031U Spindle Nut fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Nut Sockets\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eMost SUV's, 1\/2 ton, and 3\/4 ton with serviceable wheel bearings (late 1950's to early 1990's)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e:\u003cbr\u003eDana 30 (Ford Bronco) and Dana 44 (all makes)\u003cbr\u003eF-250 Crew Cab (Dana 60 front drive axles): 1973, 1974, 1975, 1976, 1977\u003cbr\u003eF-150, F250, Bronco, Dana 44 1978-1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e:\u003cbr\u003eGM 10 Bolt\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e:\u003cbr\u003e1\/2 ton and 3\/4 ton: 1969, 1970, 1971, 1972, 1973, 1974, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e:\u003cbr\u003eJ-series full size 4x4s: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660419768397,"sku":"5540031","price":7.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40031uclean__69761_9015__33093.1707934046.1280.1280.jpg?v=1742682945"},{"product_id":"5540060-qu40060u-good-used-round-spindle-lock-washer","title":"QU40060U Good Used Round Spindle Lock Washer","description":"\u003cp\u003e\u003cstrong\u003eQU40060U Good Used Round Spindle Lock Washer\u003c\/strong\u003e for Dana 28IFS, Dana 30, Dana 35IFS, Dana 44 (All Makes), Dana 44IFS, 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles, and GM 10 (Chevy\/GM) Bolt Front Axles. This washer was used between the inner and outer spindle nuts on most SUVs, 1\/2 ton and 3\/4 ton Chevy, Ford, and GM trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1985 to 1993, Jeep J-series full size 4x4s had it from 1974-1991. USA Made. Available while supply lasts.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/554727-qa4727u-good-used-4-slot-front-spindle-nut-kit\" target=\"_blank\"\u003eQA4727U\u003c\/a\u003e Used Spindle Nut Kit.\u003cbr\u003eAlso See: \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e New Round Spindle Lock Washer\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eOlder Ford Tabs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eSize\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOlder Ford Tabs\u003c\/strong\u003e\u003cbr\u003eQU40060U has the correct ID and OD to fit 1971 and prior Ford Broncos with Dana 30 front axles, but the tab that engages the spindle slot is wider than the one on the no longer available washer used by Ford.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003eQU40060U Used Spindle Washer fits spindles with thread diameters of 1-5\/8\" or 38mm.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/4769-qa4769-spindle-nut-kit-for-dana-28ifs-dana-35ifs-front-axles\" target=\"_blank\"\u003eQA4769\u003c\/a\u003e 1990-1997 Ford Dana 28IFS, 35IFS\u003cbr\u003e\u003ca href=\"\/products\/40108-qu40108-outer-spindle-nut-without-pin-for-dana-35-front-axles\" target=\"_blank\"\u003eQU40108\u003c\/a\u003e Dana 28IFS, Outer Spindle Nut\u003cbr\u003e\u003ca href=\"\/products\/40123-qu40123-inner-spindle-wheel-bearing-nut-with-pin-for-dana-35ifs-front-axles\" target=\"_blank\"\u003eQU40123\u003c\/a\u003e Dana 28IFS Inner Spindle Nut with Pin\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Dana 30, 44, 44HD\u003cbr\u003e\u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Dana 30, 44 Inner Spindle Nut\u003cbr\u003e\u003ca href=\"\/products\/40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread\" target=\"_blank\"\u003eQU40031\u003c\/a\u003e Dana 30, 44 Outer Spindle Nut\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GM:\u003c\/strong\u003e\u003cbr\u003eK10, K20, K15, K25, Standard Dana 44: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eDana 44 HD Closed Knuckle which uses a 3 piece double nut \u0026amp; washer set to adjust \u0026amp; retain wheel bearings: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eBlazer, Jimmy, 1\/2 ton, 3\/4 ton 4x4s Dana 44 Open Knuckle: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eGM 10 Bolt 8.5\" Front Axle: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW-100 Dana 44 4x4s: 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eRamcharger, W-100, W-150, W-200, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord Front Axle:\u003c\/strong\u003e\u003cbr\u003eRanger Pickup Dana 28IFS with 27 Spline Manual Lock Hubs: 1993, 1994, 1995, 1996, 1997\u003cbr\u003eBronco Dana 30: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eRanger Pickup, Bronco II, Explorer with Dana 35IFS \u0026amp; 27 Spline Manual Lock Hubs: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003eBronco, F-100, F-150 Dana 44: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF-100 1\/2 ton 4x4s Regular Cab trucks with Standard Dana 44 Closed Knuckle: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF-250 3\/4 ton 4x4s Regular Cab trucks with Standard Dana 44 Closed Knuckle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF-250 3\/4 ton 4x4s with Dana 44 Open Knuckle: 1976, 1977, 1978, 1979\u003cbr\u003eF-250 3\/4 ton Dana 44HD: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eBronco, F-100, F-150, F-250 4x4s with Dana 44IFS Front Axles with Manual Hub-Locks: 1983.5, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF-250 Crew Cab Dana 60 Front Axles: 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e1100 Dana 44: 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series:\u003c\/strong\u003e\u003cbr\u003eJ-Series Full-Size 4x4s: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660421406797,"sku":"5540060","price":2.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40060uclean__33958_9034__79984.1707934169.1280.1280.jpg?v=1742683112"},{"product_id":"5540313-qu40313u-good-used-bare-front-spindle-for-dana-44","title":"QU40313U Good Used Bare Front Spindle for Dana 44","description":"\u003cp\u003e\u003cstrong\u003eQU40313U Good Used Bare Front Spindle for 1980-1993 4x4 Dodge Dana 44\u003c\/strong\u003e in SUVs, 1\/2 ton, and 3\/4 ton with Dana 44 front axles. This Spindle is a good used genuine original equipment replacement part we took off axles for R\u0026amp;D. Fits 1980-1993 Dodge Ramcharger, Plymouth Trailduster, Dodge W150, and Dana 44 equipped W250 4x4s. This is a Bare Spindle, you need to order separately \u003ca href=\"\/products\/40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40228\u003c\/a\u003e spindle bearing and seal kit. See Tech Note 2 for 1985-1987 Left side Spindle Info. USA Made.\u003c\/p\u003e \u003cp\u003eSee: \u003ca href=\"\/products\/40313-qu40313-dana-44-front-spindle-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU40313\u003c\/a\u003e for New Front Spindle for Dodge Dana 44\u003c\/p\u003e \u003cp\u003eSee \u003ca href=\"\/products\/440313-y440313-yukon-replacement-dana-44-front-spindle-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eY440313\u003c\/a\u003e Replacement Dana 44 Front Spindle for 1980-1993 Dodge with Dana 44 front axles for a low cost, yet high quality replacement part. Imported.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info?\u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installing\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eDodge 1985-1987\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eGM and Jeep Wheel Bearings\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e1977.5-Earlier\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eDodge Wheel Seals and Wheel Hubs\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eGM Tech Help\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eDodge Standard 44 Dimensions\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eMatching Parts for GM\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003eBefore installing your new spindle, lube the bearing, seals, and thrust washer with \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex® grease. Also, apply some \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" rel=\"noopener\" target=\"_blank\"\u003eS9975\u003c\/a\u003e or \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" rel=\"noopener\" target=\"_blank\"\u003eS81343\u003c\/a\u003e Anti-Seize Compound to the mating surfaces between the spindle and steering knuckle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge 1985-1987\u003c\/strong\u003e\u003cbr\u003eThe dead spindle design of the 1985-1987 Dodge Dana 44 CAD front axle uses a needle bearing to support the right outer axle shaft. On 1985-1987 trucks, no spindle bearing is used on the LEFT side as the left inner axle shaft is supported next to the yoke by \u003ca href=\"\/products\/50155-qu50155-front-axle-transmission-and-transfer-case-roller-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50155\u003c\/a\u003e Bearing. Instead of a bearing, a Seal Retainer (which is no longer available) is installed in the left spindle. The Spindle itself is the same. If you need to replace the left spindle on your 1985-1987 truck, remove the needle bearing from your new spindle and install the Seal retainer from your old spindle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGM and Jeep Wheel Bearings\u003c\/strong\u003e\u003cbr\u003eSome early 1977 1\/2 ton GM and Jeep 4x4s with Dana 44 front axles used \u003ca href=\"\/products\/9940593-qa40593-dana-44-front-spindle-kit-for-gm-jeep-1971-1977-5\" rel=\"noopener\" target=\"_blank\"\u003eQA40593\u003c\/a\u003e spindle that takes smaller inner wheel bearings. QU40313 spindle is made for \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e inner wheel bearing which has an inside diameter of 2.00\". For the 1971-1977.5 GM 1\/2 ton spindle, see \u003ca href=\"\/products\/9940593-qa40593-dana-44-front-spindle-kit-for-gm-jeep-1971-1977-5\" rel=\"noopener\" target=\"_blank\"\u003eQA40593\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1977.5-Earlier\u003c\/strong\u003e\u003cbr\u003eSome early 1977 3\/4 ton GM and Jeep J20 4x4s with Dana 44 front axles may have had a wheel hub that used six 3\/8\" diameter bolts to secure the lockout hub or drive flange to the wheel hub. QU40313 Spindle WILL NOT fit those early 1977 and prior 3\/4 tons with the external mount hub! For the 1971-1977.5 GM and Jeep 3\/4 ton spindle, see \u003ca href=\"\/products\/40323-qu40323-3-4-ton-dana-44-front-spindle-assembly\" rel=\"noopener\" target=\"_blank\"\u003eQU40323\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge Wheel Seals and Wheel Hubs\u003c\/strong\u003e\u003cbr\u003eDodge used the same wheel bearings and same base spindle for all 1980-1993 Dana 44 front axles. However, different wheel seals and wheel hubs are used. 1980-1984 hubs have a 3-1\/4\" seal bore diameter, 1985-1993 hubs have a 3-5\/16\" seal bore diameter.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGM Tech Help\u003c\/strong\u003e\u003cbr\u003eNeed Tech Help for servicing your wheel bearings? Get my tech publication: \u003ca href=\"\/products\/774715-tsb4715-front-wheel-bearing-service-for-1977-1991-gm\" rel=\"noopener\" target=\"_blank\"\u003eTSB4715\u003c\/a\u003e \u003cem\u003eFront Wheel Bearing Service for 1977½-1991 GM Full Size SUV's, 1\/2 Ton, and 3\/4 Ton Trucks with Manual Locking Hubs\u003c\/em\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge Standard 44 Dimensions\u003c\/strong\u003e\u003cbr\u003eThe standard front axle on 1985-1993 Dodge W-250 3\/4 ton 4x4 trucks with gasoline engines is a Dana 44 beam type front axle with Gross Axle Weight Rating (GAWR) of 3500 pounds. The end of the wheel hub measures about 3-5\/8\" in diameter and the spindle thread is 1-5\/8\". Standard on the diesel W-250 and optional on the gas W-250 was the 4500 pound rated Dana 60 front axle which has a front wheel hub that measures about 4-1\/8\" at the outer end and a 2\" spindle thread.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for GM\u003c\/strong\u003e\u003cbr\u003eMatching Parts and Tools for QU40313U Front Spindle Kit:\u003cbr\u003e\u003ca href=\"\/products\/40054-qu40054-3-8-sae-x-1-1-2-long-front-spindle-to-knuckle-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40054\u003c\/a\u003e Spindle Mounting Stud 1973-1991 \u003cbr\u003e\u003ca href=\"\/products\/30191-qu30191-1-2-ton-4x4-front-wheel-hub-for-1977-5-91-chevy-gm-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU30191\u003c\/a\u003e New 6 Bolt Wheel Hub for 1977.5-1991 Blazer, Jimmy, 1\/2 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/30194-qu30194-3-4-ton-4x4-front-wheel-hub-for-1977-5-91-chevy-gm-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU30194\u003c\/a\u003e New 8 Bolt Wheel Hub for 1977.5-1991 3\/4 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/50834-qu50834-1977-5-1991-3-4-ton-hub-and-rotor-for-gm-or-jeep\" rel=\"noopener\" target=\"_blank\"\u003eQU50834\u003c\/a\u003e New 8 Bolt Hub and Rotor Assembly for 1977.5-1991 3\/4 ton Suburban and truck\u003cbr\u003e\u003ca href=\"\/products\/664715-tk4715-torque-king-master-wheel-bearing-parts-and-tools-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK4715\u003c\/a\u003e\/\u003ca href=\"\/products\/270-tk4743-torque-king-wheel-bearing-parts-kits-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eTK4743\u003c\/a\u003e Wheel Bearing Kits with Timken® Bearings\u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Timken® Outer Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Timken® Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50446\u003c\/a\u003e Timken® Inner Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e Timken® Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" rel=\"noopener\" target=\"_blank\"\u003eQU50091\u003c\/a\u003e Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e Round 4 Slot Spindle Nut Kit for vehicles with Automatic Hubs\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft \u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" rel=\"noopener\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/774715-tsb4715-front-wheel-bearing-service-for-1977-1991-gm\" rel=\"noopener\" target=\"_blank\"\u003eTSB4715\u003c\/a\u003e Front Wheel Bearing Tech Service Bulletin\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" rel=\"noopener\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for Dodge\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/5511205-qu11205u-used-5-bolt-front-wheel-hub-for-1985-1993-dodge-plymouth-1-2-ton\" rel=\"noopener\" target=\"_blank\"\u003eQU11205U\u003c\/a\u003e Used 5 Bolt Wheel Hub for 1985-1993 Ramcharger, Trailduster, W150\u003cbr\u003e\u003ca href=\"\/products\/5511197-qu11197u-used-1985-1993-8-bolt-front-wheel-hub-for-dodge-3-4-ton\" rel=\"noopener\" target=\"_blank\"\u003eQU11197U\u003c\/a\u003e Used 8 Bolt Wheel Hub for 1985-1993 W250\u003cbr\u003e\u003ca href=\"\/products\/664715-tk4715-torque-king-master-wheel-bearing-parts-and-tools-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK4715\u003c\/a\u003e\/\u003ca href=\"\/products\/270-tk4743-torque-king-wheel-bearing-parts-kits-for-chevy-gmc-dodge-jeep\" rel=\"noopener\" target=\"_blank\"\u003eTK4743\u003c\/a\u003e 1980-1984 Wheel Bearing Kits\u003cbr\u003e\u003ca href=\"\/products\/4709-tk4709d-master-wheel-bearing-kit-with-tools-for-1985-1993-dodge\" rel=\"noopener\" target=\"_blank\"\u003eTK4709D\u003c\/a\u003e\/\u003ca href=\"\/products\/4752-tk4752-dana-44-front-wheel-bearing-and-seal-kit-for-dodge-and-ford\" rel=\"noopener\" target=\"_blank\"\u003eTK4752\u003c\/a\u003e 1985-1993 Wheel Bearing Kits\u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Timken® Outer Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Timken® Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50446\u003c\/a\u003e Timken® Inner Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e Timken® Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" rel=\"noopener\" target=\"_blank\"\u003eQU50091\u003c\/a\u003e 1980-1984 Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU90001\u003c\/a\u003e 1985-1993 Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit for vehicles with solid drive gears or manual hubs\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" rel=\"noopener\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" rel=\"noopener\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003cbr\u003e\u003c\/strong\u003e1\/2 and 3\/4 ton truck plus Blazer, Jimmy, and Suburban: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBlazer, Jimmy, plus 1\/2 and 3\/4 ton Suburban: 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eRamcharger, Trailduster, W100, W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW-250 with Dana 44 Front Axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJeep J-Series Cherokee, Wagoneer, and Truck: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660435726413,"sku":"5540313","price":175.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40313uclean__73453_9203__54140.1707934669.1280.1280.jpg?v=1742683670"},{"product_id":"5540429-qu40429u-used-tabbed-spindle-lock-washer-for-dana-44-and-gm-10-bolt","title":"QU40429U Used Tabbed Spindle Lock Washer for Dana 44 and GM 10 Bolt","description":"\u003cp\u003e\u003cstrong\u003eQU40429U Used Tabbed Spindle Lock Washer\u003c\/strong\u003e for Dana 44 (Dodge, Ford), GM 10 Bolt (Chevy\/GMC) front drive axles. This washer was used between the inner and outer spindle nuts on many SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings. GM used QU40429 from 1982 to 1991, Ford Dana 44IFS axles had QU40429 off and on from 1981 to 1996. Dodge used it from 1980-1984.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e New\u003cbr\u003eAlso see \u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e Spindle Nut Kit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHubs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eFits 1-5\/8” Thread Dia.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHubs\u003c\/strong\u003e\u003cbr\u003e QU40429U was mainly used on vehicles with available automatic locking hubs. The four tabs engaged 4 slots in the automatic hub body. For trucks with manual locking hubs, QU40429U is interchangeable with \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits 1-5\/8” Thread Dia.\u003c\/strong\u003e\u003cbr\u003e QU40429U Spindle Washer fits spindles with thread diameters of 1-5\/8”.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e \u003cbr\u003eDana 44 SUVs, ½ ton and ¾ ton, and GM 10 Bolt: \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge: \u003c\/strong\u003e1980, 1981, 1982, 1983, 1984\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e 1981, 1982, 1983, 1984\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy, GM: \u003c\/strong\u003e1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660960800845,"sku":"5540429","price":25.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40429u__26258.1718819548.1280.1280.jpg?v=1742720707"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/gm_10_bolt_spindle_parts__02733_4cacc8d8-a2cb-4e71-8045-a7f4b50e66d6.jpg?v=1774365934","url":"https:\/\/torqueking.com\/collections\/spindles-1977-1991-gm-10-bolt.oembed","provider":"Torque King 4x4","version":"1.0","type":"link"}