{"title":"Small Parts 1967-1969 GM Dana 44","description":"\u003cp\u003eShop now for Small Parts for 1967-1969 GM standard Dana 44 and 1967-1969 Dana 44HD Closed Knuckle Front Axles. Great selection. In stock. Quick shipping. \u003c\/p\u003e\n\u003cp\u003eSometimes, you just need one or two small parts to get back on the road. Between the small parts listed in this section and many others listed under part specific headings elsewhere on the page, we probably have that pesky little part you have to have but just can't find anywhere else.\u003c\/p\u003e","products":[{"product_id":"40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles","title":"QU40002 Outer Pinion Bearing Slinger Dana 25, 27, 30, 44, 50, 53 Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40002 Outer Pinion Bearing Slinger\u003c\/strong\u003e for Dana-Spicer Model 25, Model 27, Model 30, Model 44, Model 50, and Model 53 Drive Axles (front or rear). QU40002 is a genuine Dana-Spicer flat, stamped steel Slinger that fits most Model 53 and smaller Spicer drive axles except for the Model 35. This Slinger is installed between the outer pinion bearing and pinion yoke. USA Made.\u003c\/p\u003e \u003cp\u003eInteractive Exploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010DT 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWhen to Replace\u003c\/a\u003e \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWhen to Replace\u003c\/strong\u003e\u003cbr\u003eQU40002 should be replaced if it is bent, or if the pinion yoke has worn a groove in it.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 CJ Dana 30\u003cbr\u003e1986 CJ Dana 44\u003cbr\u003e1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Wrangler (YJ) Dana 30 and Dana 44\u003cbr\u003e1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Wrangler (TJ) Dana 30 and Dana 44\u003cbr\u003e1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Cherokee (XJ) Dana 30\u003cbr\u003e1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 Cherokee (XJ) Dana 44\u003cbr\u003e1993, 1994, 1995, 1996, 1997, 1998 Grand Cherokee (ZJ) Dana 30\u003cbr\u003e1999, 2000, 2001, 2002, 2003, 2004 Grand Cherokee (WJ) Dana 30\u003cbr\u003e1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 SJ and J Series Dana 44\u003cbr\u003e1986, 1987, 1988, 1989, 1990, 1991, 1992, -1993 Comanche (MJ) Dana 44\u003cbr\u003e1995, 1996, 1997 Dana 50IFS\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656928206925,"sku":"40002","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40002_1200__15438_18839__10986.1707860616.1280.1280.png?v=1786723411"},{"product_id":"40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles","title":"QU40009 OEM Dana Pinion Lock Nut for Dana 25, 27, 30, 44, 50, 53 Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40009 Dana Axle Pinion Lock Nut\u003c\/strong\u003e is a genuine Dana-Spicer original equipment replacement part that fits most Dana-Spicer Model 25, Model 27, Model 28, Model 30, Model 44, Model 50, and Model 53 front or rear drive axles. All metal nut is plated for corrosion protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eLocking Ability\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLocking Ability\u003c\/strong\u003e\u003cbr\u003eThese lock nuts are designed to be used only once. The locking ability of the nut is at its maximum on the initial installation. When setting up an axle, I use the old nut until the pinion depth and pinion preload is set. I then apply medium strength Threadlocker (see \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e, \u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003eS24200\u003c\/a\u003e) to a new nut and install it with a 1-1\/8\" socket. See my color illustrated Technical Manual \u003cem\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service on Dana-Spicer Monobeam Axles\u003c\/em\u003e or your Factory Shop Manual for the correct torque or tightening procedure.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eInteractive Exploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010DT 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/441975-d441975-drive-gear\"\u003eD441975\u003c\/a\u003e D30, D44 Ring Gear Bolts, Pinion Nut, and Pinion Washer Set\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Washer, \u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311\u003c\/a\u003e Dana 44 Bearing Kit (most 1993 and prior)\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Dana 44 Front Axle Diff Bearing and Seal Kit\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #800080;\"\u003eAll Blazer, Jimmy, 1\/2 Ton, and 3\/4 Ton Dana 44 Front Axles:\u003c\/span\u003e 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge\/Plymouth:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #003366;\"\u003eAll Ramcharger, Trailduster, W100, W150, W200, W250 with Dana 44 Front Axle:\u003c\/span\u003e 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cspan style=\"color: #008080;\"\u003eRam 1500:\u003c\/span\u003e 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003eRam 2500 Dana 44 Front Axles:\u003c\/span\u003e 1994, 1995, 1996, 1997\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #993300;\"\u003eAll Dana 44, Dana 44IFS Front Axles Bronco, F100, F150, F250:\u003c\/span\u003e 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003e\u003cspan style=\"color: #808000;\"\u003eFord Bronco Dana 30 Front Axle:\u003c\/span\u003e 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cspan style=\"color: #003366;\"\u003eBronco II, Ranger with Dana 28 IFS Front Axle:\u003c\/span\u003e 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003e\u003cspan style=\"color: #ff00ff;\"\u003eF250 with Dana 50IFS Front Axle:\u003c\/span\u003e 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003e\u003cspan style=\"color: #008000;\"\u003eF350 with Dana 50 Front Axle:\u003c\/span\u003e 1980, 1981, 1982, 1983, 1984, 1985\u003cbr\u003e\u003cspan style=\"color: #333399;\"\u003eFord Super Duty F250, F350 with Dana 50 Axle:\u003c\/span\u003e 1999, 2000, 2001, 2002\u003cbr\u003e\u003cspan style=\"color: #ff6600;\"\u003eExcursion:\u003c\/span\u003e 2000, 2001, 2002\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #800080;\"\u003eScout Front and Rear Axles:\u003c\/span\u003e 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003e\u003cspan style=\"color: #800000;\"\u003eAll Dana 44 Front and Rear Axles in 1\/2 ton and 3\/4 ton trucks:\u003c\/span\u003e 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003eAll Civilian and 1\/4 ton Military Dana 25, 27, 30, 44 Front Axles:\u003c\/span\u003e 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003cbr\u003e\u003cspan style=\"color: #008080;\"\u003eAll Dana 25, 27, 30, 44, and 53 Rear Axles:\u003c\/span\u003e 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003cbr\u003e\u003cspan style=\"color: #ff6600;\"\u003eSome Dana 30 and Dana 44 Axles:\u003c\/span\u003e 1999-up\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656931647565,"sku":"40009","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40009clean__80733_10535__96563.1707860672.1280.1280.jpg?v=1786095537"},{"product_id":"40010-qu40010-dana-axle-pinion-washer","title":"QU40010 Dana Axle Pinion Washer","description":"\u003cp\u003e\u003cstrong\u003eQU40010 Dana Axle Pinion Washer\u003c\/strong\u003e is a genuine Dana-Spicer flat washer that fits between the pinion nut and pinion yoke on most Dana 25, Dana 27, Dana 30, Dana 44, Dana 50, and Dana 53 Drive Axles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWhen to Replace\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWhen to Replace\u003c\/strong\u003e\u003cbr\u003eReplace your Pinion Washer if it is bent, gouged, or damaged in any way.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eInteractive Exploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Dana 44 Front Axle Diff Bearing and Seal Kit\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ Dana 30: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eCJ Dana 44: 1986\u003cbr\u003eWrangler (YJ) Dana 30 and Dana 44: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995\u003cbr\u003eWrangler (TJ) Dana 30 and Dana 44: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006\u003cbr\u003eCherokee (XJ) Dana 30: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003eCherokee (XJ) Dana 44: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003cbr\u003eGrand Cherokee (ZJ) Dana 30: 1993, 1994, 1995, 1996, 1997, 1998\u003cbr\u003eGrand Cherokee (WJ) Dana 30: 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003eSJ and J Series Dana 44: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eComanche (MJ) Dana 44: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003e\u003c\/strong\u003eF150, F250, Bronco, Dana 44: 1978, 1979\u003cbr\u003eDana 50IFS: 1995, 1996, 1997\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41656932008013,"sku":"40010","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40010_clean_1280__29837.1728499041.1280.1280.jpg?v=1786092420"},{"product_id":"40311-qu40311-dana-44-differential-and-pinion-shim-kit","title":"QU40311 Dana 44 Differential and Pinion Shim Kit","description":"\u003cp\u003e\u003cstrong\u003eQU40311 Dana 44 Differential and Pinion Shim Kit \u003c\/strong\u003efor 1950s to 1993 Dana-Spicer Model 44 Front or Rear Axles that use shims to set pinion bearing preload. Genuine Dana-Spicer Shim Kit includes pinion depth shims, pinion preload shims, differential adjusting shims, pinion nut, pinion washer, and differential cover pan gasket. Several shims are included of each type and thickness so you can precisely set your axle up for optimum performance. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eTech Help\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eShims\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eKit Components\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTech Help\u003c\/strong\u003e\u003cbr\u003ePinion Depth must be set before calculating the differential shim pack thicknesses. Use a dial indicator and \u003cspan\u003e\u003ca href=\"\/products\/1097-qt1097-differential-master-bearings-for-dana-44-axles\" target=\"_blank\"\u003e\u003cspan\u003eQT1097 \u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003eMaster Bearings to determine the amount of shims required to get the correct gear lash and differential bearing preload. See \u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003e\u003cspan\u003eTM4400\u003c\/span\u003e \u003c\/a\u003e\u003cem\u003ePinion and Differential Bearing Service On Dana-Spicer Monobeam Axles\u003c\/em\u003e for the correct differential bearing adjustment service procedures.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eShims\u003c\/strong\u003e\u003cbr\u003eTypically, QU40311 Shim Kit has a selection of 0.003\", 0.005\", 0.010\", and 0.030\" thicknesses shims for both pinion preload and differential adjustment. Pinion depth shim thicknesses are 0.003\", 0.005\", and 0.010\". With these shim sizes, building precise shim packs is easy.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003e\u003cspan\u003eQU40009\u003c\/span\u003e \u003c\/a\u003ePinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003e\u003cspan\u003eQU40010\u003c\/span\u003e \u003c\/a\u003ePinion Washer\u003cbr\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003e\u003cspan\u003eQU40214\u003c\/span\u003e \u003c\/a\u003eDifferential Cover Gasket\u003cbr\u003ePinion Depth Shims\u003cbr\u003ePinion Preload Shims\u003cbr\u003eDifferential Side Bearing Shims\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003e\u003cspan\u003eQU40002\u003c\/span\u003e \u003c\/a\u003eOuter Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003e\u003cspan\u003eQU50576\u003c\/span\u003e \u003c\/a\u003eDana 44 Front Axle Diff Bearing and Seal Kit \u003cbr\u003e\u003ca href=\"\/products\/40209-qu40209-dana-44-ring-gear-bolt\" target=\"_blank\"\u003e\u003cspan\u003eQU40209\u003c\/span\u003e \u003c\/a\u003eRing Gear Bolt \u003cbr\u003e\u003ca href=\"\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle\" target=\"_blank\"\u003e\u003cspan\u003eQU40448\u003c\/span\u003e \u003c\/a\u003eInner Pinion Cup Oil Baffle\u003cbr\u003e\u003ca href=\"\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger\" target=\"_blank\"\u003e\u003cspan\u003eQU40028\u003c\/span\u003e \u003c\/a\u003eInner Pinion Bearing Slinger\u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003e\u003cspan\u003eQU40215\u003c\/span\u003e \u003c\/a\u003eDana 44 Pinion Seal \u003cbr\u003eFront Inner Axle Seals will vary by year\/model\u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003e\u003cspan\u003eQT1044\u003c\/span\u003e \u003c\/a\u003eInner Pinion Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003e\u003cspan\u003eQT1812\u003c\/span\u003e \u003c\/a\u003eOuter Pinion Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1818-qt1818-taper-bearing-cup-installer\" target=\"_blank\"\u003e\u003cspan\u003eQT1818\u003c\/span\u003e \u003c\/a\u003eInner Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1097-qt1097-differential-master-bearings-for-dana-44-axles\" target=\"_blank\"\u003e\u003cspan\u003eQT1097\u003c\/span\u003e \u003c\/a\u003eDifferential Master Bearings\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003e\u003cspan\u003eQT1032\u003c\/span\u003e \u003c\/a\u003eDifferential Case Spreader\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eDana-Spicer Model 44 Front or Rear Axles that use shims to set pinion bearing preload: 1950s to 1993\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657562792013,"sku":"40311","price":74.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40311_Clean_1280__40065.1713984453.1280.1280.jpg?v=1787902428"},{"product_id":"40343-qu40343-bolt-differential-bearing-cap-dana-44-50-60-61-70-70hd-80-axles","title":"QU40343 Bolt, Differential Bearing Cap Dana 44, 50, 60, 61, 70, 70HD, 80 Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40343 Differential Cap Bolt\u003c\/strong\u003e with 3\/4\" hex head for almost all Dana 44, 50, 60, 61, 70, 70HD, and 80 Front and Rear Drive Axles. Long shoulder, hardened, Grade 8 bolt is a genuine Dana-Spicer original equipment part. Use to replace any broken, stretched, dinged or damaged differential bolt from your Dana-Spicer diff. Also use as an upgrade on older axles to replace original Grade 5 bolts. Sold individually, but requires 4 total bolts per axle. Country of origin unknown, but head markings indicate U.S.A.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5540343-qu40343u-used-differential-cap-bolt-for-dana-axles\" target=\"_blank\"\u003eQU40343U\u003c\/a\u003e Used Differential Cap Bolt available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eThreadlocker\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eExploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThreadlocker\u003c\/strong\u003e\u003cbr\u003e Apply medium strength blue threadlocker (\u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003eS24200\u003c\/a\u003e, \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e) to the threads before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eExploded Views\u003c\/strong\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003c\/a\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e \u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv2011-dana-80-rear-axle-exploded-view-2000-2002-dodge-ram-2500-ram-3500\" target=\"_blank\"\u003eXV2011 2000-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axle\u003c\/a\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevrolet:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 60, 70, 70HD, and 80 Axles 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003e All Dana 44, 60, 70, 70HD, and 80 Axles 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 50, 60, 61, 70, 70HD, and 80 Axles 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e GMC:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 60, 70, 70HD, and 80 Axles 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e International:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 60, 61, 70, and 70HD Axles 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Jeep:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 53, 60, and 70 Axles 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657580191821,"sku":"40343","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40343_front_1200_clean__15306_14226__37462.1707888028.1280.1280.jpg?v=1787902494"},{"product_id":"40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle","title":"QU40448 Dana 44 Inner Pinion Bearing Oil Baffle","description":"\u003cp\u003e\u003cstrong\u003eQU40448 Dana 44 Inner Pinion Bearing Oil Baffle\u003c\/strong\u003e is a genuine Dana original equipment stepped, stamped steel Oil Baffle primarily found on front axle applications. QU40448 fits between your Dana 44 axle's inner pinion bearing cup and the axle housing. The baffle slows the flow of oil from the outer pinion bearing ensuring it is properly lubricated. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eOnly Use with Originally Equipped\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003ePinion Depth\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOnly Use with Originally Equipped\u003c\/strong\u003e\u003cbr\u003eQU40448 is not used on all Dana 44 axles. It is primarily found on front axle applications, but it should not be used unless your axle was originally equipped with one.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePinion Depth\u003c\/strong\u003e\u003cbr\u003eSince QU40448 fits between the inner pinion bearing cup and axle housing inner pinion bore face, you MUST include the thickness of the Baffle when calculating your pinion depth shim pack. Typically axles that use this Baffle will have deeper inner pinion bearing bores compared to axles that do not use the Baffle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40448 Dana 44 Inner Pinion Bearing Cup Baffle:\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003e\u003cspan\u003eQU40009\u003c\/span\u003e \u003c\/a\u003ePinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003e\u003cspan\u003eQU40010\u003c\/span\u003e \u003c\/a\u003ePinion Washer \u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003e\u003cspan\u003eQU40002\u003c\/span\u003e \u003c\/a\u003eOuter Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003e\u003cspan\u003eQU40311\u003c\/span\u003e \u003c\/a\u003eComplete Differential and Pinion Shim Kit \u003cbr\u003e\u003ca href=\"\/products\/40209-qu40209-dana-44-ring-gear-bolt\" target=\"_blank\"\u003e\u003cspan\u003eQU40209\u003c\/span\u003e \u003c\/a\u003eRing Gear Bolt \u003cbr\u003e\u003ca href=\"\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger\" target=\"_blank\"\u003e\u003cspan\u003eQU40028\u003c\/span\u003e \u003c\/a\u003eInner Pinion Cup Oil Slinger\u003cbr\u003e\u003ca href=\"\/products\/50535-qu50535-dana-25-dana-44-inner-timken-pinion-bearing-cup\" target=\"_blank\"\u003e\u003cspan\u003eQU50535\u003c\/span\u003e \u003c\/a\u003eInner Pinion Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50536-qu50536-dana-25-dana-44-inner-timken-pinion-bearing\" target=\"_blank\"\u003e\u003cspan\u003eQU50536\u003c\/span\u003e \u003c\/a\u003eInner Pinion Bearing\u003cbr\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003e\u003cspan\u003eQU40214\u003c\/span\u003e \u003c\/a\u003eDifferential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003e\u003cspan\u003eQU50576\u003c\/span\u003e \u003c\/a\u003eDana 44 Front Axle Diff Bearing and Seal Kit (most 1967-1993 beam type front axles) \u003cbr\u003e Inner Axle Seals will vary by year\/model, see axle specific main page below \u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003e\u003cspan\u003eQT1044\u003c\/span\u003e \u003c\/a\u003eInner Pinion Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003e\u003cspan\u003eQT1812\u003c\/span\u003e \u003c\/a\u003eOuter Pinion Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1818-qt1818-taper-bearing-cup-installer\" target=\"_blank\"\u003e\u003cspan\u003eQT1818\u003c\/span\u003e \u003c\/a\u003eInner Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1097-qt1097-differential-master-bearings-for-dana-44-axles\" target=\"_blank\"\u003e\u003cspan\u003eQT1097\u003c\/span\u003e \u003c\/a\u003eDifferential Master Bearings\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003e\u003cspan\u003eQT1032\u003c\/span\u003e \u003c\/a\u003eDifferential Case Spreader\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eK10, K20, K15, K25 Dana 44 Front Axles: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK20, K25 Dana 44HD Front Axles: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\/Plymouth:\u003c\/strong\u003e\u003cbr\u003eRamcharger, W100, W150, W200, W250, Traildusters with Dana 44 Front Axles: 1975, 1976, 1977, 1978, 1979\u003cbr\u003eTrailduster, Ramcharger, W150, W250 with Dana 44 Front Axles: 1980, 1981, 1982, 1983, 1984\u003cbr\u003eRamcharger, W100, W150, W200, W250, Traildusters with Dana 44 Front Axles: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100\/F150 with Dana 44 Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF250 with Dana 44 or Dana 44HD Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eBronco with Dana 44 Front Axles: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eForward Control (FC) Series Trucks with Dana 44 Front Axles: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eWagoneer\/Cherokee with Dana 44 Front Axles: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983\u003cbr\u003eGrand Wagoneer with Dana 44 Front Axles: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ-10\/J-20 with Dana 44 Front Axles: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657751535693,"sku":"40448","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40448__21269_9265__47482.1707892260.1280.1280.jpg?v=1787904647"},{"product_id":"51050-qu51050-dana-44-basic-pinion-depth-shim-kit","title":"QU51050 Dana 44 Basic Pinion Depth Shim Kit","description":"\u003cp\u003e\u003cstrong\u003eQU51050 Basic Pinion Depth Shim Kit for Dana 44 Axles\u003c\/strong\u003e includes 5 total shims in 4 sizes that can be combined to equal the total pinion depth shim pack required for vintage Dana 44 and Spicer Model 44 axles that use pinion depth shims located between the inner pinion bearing cup and axle housing. QU51050 is a low-cost option for those who just need pinion depth shims for their Dana 44 axle. If you need a complete Dana 44 Pinion and Differential Shim Kit that includes Pinion Depth, Pinion Preload, and Differential Shims, see \u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311.\u003c\/a\u003e \u003cbr\u003eShim Sizes Included:\u003cbr\u003e(1) 0.10\"\u003cbr\u003e(2) 0.012\"\u003cbr\u003e(1) 0.015\"\u003cbr\u003e(1) 0.020\"\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657950830669,"sku":"51050","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu51050clean__13731_10296__90177.1707898231.1280.1280.jpg?v=1787903718"},{"product_id":"95104-qu95104-1-2-grade-8-split-lock-washer-usa-made","title":"QU95104 1\/2\" Grade 8 Split Lock Washer USA Made","description":"\u003cp\u003e\u003cstrong\u003eQU95104 1\/2\" USA MADE Grade 8 Zinc Plated Lock Washer\u003c\/strong\u003e is a high quality, USA made hardened Lock Washer featuring:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eYellow zinc plated for corrosion resistance\u003c\/li\u003e \u003cli\u003eExceeds all ASA physical requirements\u003c\/li\u003e \u003cli\u003eRockwell hardness: C38-46\u003c\/li\u003e \u003cli\u003eMeets ASME \u0026amp; ANSI B18.21.1-1990\u003c\/li\u003e \u003cli\u003eRetains basic strength up to 800°F\u003c\/li\u003e \u003cli\u003eResists loosening caused by vibration\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#xv\"\u003eExploded Views\u003c\/a\u003e \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"xv\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eExploded Views:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e \u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1015-exploded-view-1985-1991-ford-f350-dana-60-front-axle\" target=\"_blank\"\u003eXV1015 1985-1991 Ford F350 Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eDana 44HD, Dana 60, and Dana 70 Closed Knuckle Front Axles in GM, Dodge, IHC, and Jeep\u003c\/p\u003e","brand":"USA Made Hardware","offers":[{"title":"Default Title","offer_id":41658158514253,"sku":"95104","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu95104_1_1200_clean__36095_15738__00275.1707899163.1280.1280.jpg?v=1787132499"},{"product_id":"441957-d441957-dana-44-differential-shims","title":"D441957 Dana 44 Differential Shims","description":"\u003cp\u003eD441957 Dana 44 Differential Shim Kit.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41658634207309,"sku":"441957","price":12.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/d441957_3429_1600__16031_21728__89712.1707902205.1280.1280.png?v=1787902764"},{"product_id":"441967-d441967-seal-slinger-amp","title":"D441967 Dana 44 Pinion Seal, Slinger, and Baffle Kit","description":"\u003cp\u003e\u003cstrong\u003eD441967 Differential Pinion Seal, Slinger, and Baffle Kit\u003c\/strong\u003e is a genuine Dana original equipment parts to fit many vintage Chevy, Dodge, Ford, and Jeep applications with Dana 44 front axles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles?_pos=2\u0026amp;_psq=qu40002\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Bearing Slinger for Dana 25, 27, 30, 44, 50, 53\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger?_pos=2\u0026amp;_psq=qu40028\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eQU40028\u003c\/a\u003e Inner Pinion Bearing Slinger\/Spacer for Dana 44, 50\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40215-qu40215-dana-axle-pinion-seal?_pos=1\u0026amp;_sid=b8b259416\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal for Dana 25, 27, 30, 44\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle?_pos=1\u0026amp;_psq=qu40448\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003eQU40448\u003c\/a\u003e Inner Pinion Bearing Oil Baffle for Dana 44\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41658644136013,"sku":"441967","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/D441967_2__92312.1742407605.1280.1280.png?v=1787907392"},{"product_id":"442047-d442047-dana-44-differential-shim-set","title":"D442047 Dana 44 Differential Shim Set","description":"\u003cp\u003e\u003cstrong\u003eD442047 Dana 44 Differential Adjuster Shim Ki\u003c\/strong\u003et is a complete, genuine Dana Spicer Differential Adjusting Shim Kit for most Dan Model 44 front or rear axles from the mid 1960's up to about 2005. D442047 includes a generous assortment of different thickness shims for precise adjustment of ring gear backlash and differential bearing preload.  Made in U.S.A.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311\u003c\/a\u003e Master Diff and Pinion Shim Kit\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41659091779661,"sku":"442047","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/d442047_1200__07763_18998__95298.1707912222.1280.1280.png?v=1787906961"},{"product_id":"453396-yspsr-005-outer-stub-snap-ring","title":"YSPSR-005 Outer Stub Snap Ring","description":"\u003cp\u003e\u003cstrong\u003eYSPSR-005 Outer Stub Snap Ring\u003c\/strong\u003e (inside locking hub) for Dana 28, Dana 30, Dana 44, and Dana 50.\u003c\/p\u003e","brand":"Randys R P","offers":[{"title":"Default Title","offer_id":41659535130701,"sku":"453396","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/YSPSR005__94593_16352__43859.1707916572.1280.1280.jpg?v=1786726572"},{"product_id":"5542009-qu42009u-used-7-16-id-tapered-locking-bushing-cone","title":"QU42009U Used 7\/16\" ID Tapered Locking Bushing Cone","description":"\u003cp\u003e\u003cstrong\u003eQU42009U Used 7\/16\" ID Tapered Locking Bushing Cone\u003c\/strong\u003e for Dana Rear Axles and Dana 44 Front Steering Arms fits 1990 and earlier Dana 60, Dana 60HD or Dana 70 full floating rear axle shafts with tapered holes in the drive flange as found in many older Dodge, International, and Jeep trucks plus some vintage Ford 1 ton Dana 70 rear axles. QU42009U also fits the steering arms on 1975 and prior standard Dana 44 closed knuckle front axles with a trapezoid steering arm to steering knuckle bolt pattern. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/42009-qu42009-7-16-oe-taper-lock-wedge-dana-rear-axle-shafts-steering-arms\" target=\"_blank\"\u003eQU42009\u003c\/a\u003e New Tapered Locking Bushing Cone\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eProduct Note\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eSplit in Bushing\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eAdapter\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note10\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note11\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eQU42009U is a original equipment Dana Tapered Bushing part number for both Dana 60\/70 rear axle shafts and Dana 44 closed knuckle front steering arms retained by 7\/16\" studs. Length is is about 4\/10\" long. For rear axle shafts, 5\/16\" long \u003ca href=\"\/products\/40577-qu40577-7-16-id-tapered-lock-wedge-or-cone-for-dana-rear-axles\" target=\"_blank\"\u003eQU40577\u003c\/a\u003e is available at a lower cost. \u003ca href=\"\/products\/40577-qu40577-7-16-id-tapered-lock-wedge-or-cone-for-dana-rear-axles\" target=\"_blank\"\u003eQU40577\u003c\/a\u003e can NOT be used in place of QU42009U for steering arms because the steering arms used on standard Dana 44 closed knuckle front axles have a deeper bore compared to rear axle shafts.\u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note10\"\u003e\u003cstrong\u003eTech Note 10:\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSplit in Bushing\u003c\/strong\u003e\u003cbr\u003eThe idea of using a split taper bushing is to eliminate all axle shaft to fastener air gaps thereby minimizing the chance the fasteners loosen up and shear the studs under high load situations. Tapered Axle Shaft Bushings are ONLY used with studs as the split allows the wedge to compress around the shank.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eTo remove the wedges, they must first be loosened up by vibration so they can expand slightly. Typically, you take off the locking nuts (and washers if present). An air hammer or large hammer\/punch combination is then used to apply impact force to the noncritical open areas of the axle shaft flange. Sooner or later, the impact vibration will loosen the tapered wedges which can then be removed with \u003ca href=\"\/products\/1060-qt1060-taper-wedge-remover\" target=\"_blank\"\u003eQT1060\u003c\/a\u003e or other suitable tool. Never apply impact force to the stud, bushing or lathe center hole of the axle shaft!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAdapter\u003c\/strong\u003e\u003cbr\u003eQU42009U is referred to as an Adapter in most original equipment vehicle parts books.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts\/Tools for QU42009U 7\/16\" Taper Split Wedge (aka: Adapter): \u003cbr\u003e\u003ca href=\"\/products\/40577-qu40577-7-16-id-tapered-lock-wedge-or-cone-for-dana-rear-axles\" target=\"_blank\"\u003eQU40577\u003c\/a\u003e Replacement Split Taper Wedge Bushing for Rear Axle Shafts \u003cbr\u003e\u003ca href=\"\/products\/95036-qu95036-7-16-fine-thread-all-metal-class-c-usa-made-lock-nut\" target=\"_blank\"\u003eQU95036\u003c\/a\u003e 7\/16\" All Steel USA Made Lock Nut \u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Steel Axle Shaft Flange Gasket for most Ford and Dodge Dana 60, Dana 70 Axles \u003cbr\u003e\u003ca href=\"\/products\/15003-qu15003-8-bolt-rear-axle-flange-gasket-for-vintage-dana-60-dana-70\" target=\"_blank\"\u003eQU15003\u003c\/a\u003e Paper Axle Shaft Flange Gasket for Jeep M715 and some IHC and early Dodge Axles \u003cbr\u003e\u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e Knuckle Ball Seal Kit for Dana 44 Closed Knuckle Front Axles \u003ca href=\"\/products\/4617-qk4617-dana-axle-small-knuckle-bearing-and-shim-kit\" target=\"_blank\"\u003eQK4617\u003c\/a\u003e Knuckle Bearing Kit for Dana 44 Closed Knuckle Front Axles \u003cbr\u003e\u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e\/\u003ca href=\"\/products\/20092-qu20092-drivers-side-upper-king-pin-0-010-trapezoid-knuckle-shim\" target=\"_blank\"\u003eQU20092\u003c\/a\u003e Trapezoid Knuckle Shims \u003cbr\u003e\u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e King Pin Bearing Cup for Dana 44 Closed Knuckle Front Axles \u003cbr\u003e\u003ca href=\"\/products\/8950628-qu50628-king-pin-or-knuckle-bearing-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU50628\u003c\/a\u003e King Pin Bearing for Dana 44 Closed Knuckle Front Axles \u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e 6 Bolt Inner Metal Hub Gasket for GM 3\/4 ton trucks with Dana Plastic Dial Factory Lockouts \u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e 6 Bolt Hub Gasket for Chevy, Dodge, and GMC with External Mount Lockouts \u003cbr\u003e\u003ca href=\"\/products\/1060-qt1060-taper-wedge-remover\" target=\"_blank\"\u003eQT1060\u003c\/a\u003e Taper Wedge Remover Tool\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note10\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 10:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note11\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 11:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC: \u003cbr\u003e\u003c\/strong\u003e1\/2 ton and 3\/4 ton 4x4s with Closed Knuckle Dana 44 Front Axles and 7\/16\" Steering Arm Studs: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eDana 44 Closed Knuckle Front Axle with 7\/16\" Steering Arm Studs: 1960.5, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eW100, D200, W200 Dana 60 Rear Axle Shaft: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003eD200, W200 Dana 60 Rear Axle up to approx 4-1-1976 build date: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003cbr\u003eD\/W200, D\/W250 series with 6200 pound capacity Dana 60 Rear Axle: 4-2-1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 up to 11-12-1990 build date\u003cbr\u003eD\/W300, D\/W350 with standard Dana 70 Rear Axle: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 up to 11-12-1990 build date\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eDana 60 Rear Axle: 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eThose Dana 60 Rear Axle with 7\/16\" Hub to Axle Shaft Studs: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003eThose Dana 70 Rear Axle with 7\/16\" Hub to Axle Shaft Studs: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003eF100 4x4 Closed Knuckle Dana 44 Front Axle with 7\/16\" Steering Arm Studs: 1960.5, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF250 4x4 Closed Knuckle Dana 44 Front Axle with 7\/16\" Steering Arm Studs: 1960.5, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100, 1200 with Closed Knuckle Dana 44 Front Axles and 7\/16\" Steering Arm Studs: 1969, 1970, 1971\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003eFC170 with Dual Rear Wheels: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967\u003cbr\u003eJ-Series with Dual Rear Wheels: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eM715, M725, M726 Military 1-1\/4 Ton Trucks: 1967, 1968, 1969\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660081143885,"sku":"5542009","price":9.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu42009uclean__32107_9575__96306.1707922891.1280.1280.jpg?v=1787129013"},{"product_id":"42009-qu42009-7-16-oe-taper-lock-wedge-dana-rear-axle-shafts-steering-arms","title":"QU42009 7\/16\" OE Taper Lock Wedge Dana Rear Steering Arms \u0026 Axle Shafts","description":"\u003cp\u003e\u003cstrong\u003eQU42009 Original Equipment 7\/16\" ID Tapered Locking Bushing Cone\u003c\/strong\u003e for Dana Full-Floating Rear Axles and Dana 44 Front Steering Arms fits 1990 and earlier Dana 60, Dana 60HD or Dana 70 full floating rear axle shafts with tapered holes in the drive flange as found in many older Dodge, International, and Jeep trucks plus some vintage Ford 1 ton Dana 70 rear axles. QU42009 also fits the steering arms on 1975 and prior standard Dana 44 closed knuckle front axles with a trapezoid steering arm to steering knuckle bolt pattern.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5542009-qu42009u-used-7-16-id-tapered-locking-bushing-cone\" target=\"_blank\"\u003eQU42009U\u003c\/a\u003e Used Tapered Locking Bushing Cone available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eProduct Note\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eSplit in Bushing\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eAdapter\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note10\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note11\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eQU42009 is a original equipment Dana Tapered Bushing part number for both Dana 60\/70 rear axle shafts and Dana 44 closed knuckle front steering arms retained by 7\/16\" studs. Length is is about 4\/10\" long. For rear axle shafts, 5\/16\" long \u003ca href=\"\/products\/40577-qu40577-7-16-id-tapered-lock-wedge-or-cone-for-dana-rear-axles\" target=\"_blank\"\u003eQU40577\u003c\/a\u003e is available at a lower cost. \u003ca href=\"\/products\/40577-qu40577-7-16-id-tapered-lock-wedge-or-cone-for-dana-rear-axles\" target=\"_blank\"\u003eQU40577\u003c\/a\u003e can NOT be used in place of QU42009 for steering arms because the steering arms used on standard Dana 44 closed knuckle front axles have a deeper bore compared to rear axle shafts.\u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note10\"\u003e\u003cstrong\u003eTech Note 10:\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSplit in Bushing\u003c\/strong\u003e\u003cbr\u003eThe idea of using a split taper bushing is to eliminate all axle shaft to fastener air gaps thereby minimizing the chance the fasteners loosen up and shear the studs under high load situations. Tapered Axle Shaft Bushings are ONLY used with studs as the split allows the wedge to compress around the shank.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eTo remove the wedges, they must first be loosened up by vibration so they can expand slightly. Typically, you take off the locking nuts (and washers if present). An air hammer or large hammer\/punch combination is then used to apply impact force to the noncritical open areas of the axle shaft flange. Sooner or later, the impact vibration will loosen the tapered wedges which can then be removed with \u003ca href=\"\/products\/1060-qt1060-taper-wedge-remover\" target=\"_blank\"\u003eQT1060\u003c\/a\u003e or other suitable tool. Never apply impact force to the stud, bushing or lathe center hole of the axle shaft!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAdapter\u003c\/strong\u003e\u003cbr\u003eQU42009 is referred to as an Adapter in most original equipment vehicle parts books.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts\/Tools for QU42009 7\/16\" Taper Split Wedge (aka: Adapter): \u003cbr\u003e\u003ca href=\"\/products\/40577-qu40577-7-16-id-tapered-lock-wedge-or-cone-for-dana-rear-axles\" target=\"_blank\"\u003eQU40577\u003c\/a\u003e Replacement Split Taper Wedge Bushing for Rear Axle Shafts \u003cbr\u003e\u003ca href=\"\/products\/95036-qu95036-7-16-fine-thread-all-metal-class-c-usa-made-lock-nut\" target=\"_blank\"\u003eQU95036\u003c\/a\u003e 7\/16\" All Steel USA Made Lock Nut \u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Steel Axle Shaft Flange Gasket for most Ford and Dodge Dana 60, Dana 70 Axles \u003cbr\u003e\u003ca href=\"\/products\/15003-qu15003-8-bolt-rear-axle-flange-gasket-for-vintage-dana-60-dana-70\" target=\"_blank\"\u003eQU15003\u003c\/a\u003e Paper Axle Shaft Flange Gasket for Jeep M715 and some IHC and early Dodge Axles \u003cbr\u003e\u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e Knuckle Ball Seal Kit for Dana 44 Closed Knuckle Front Axles \u003ca href=\"\/products\/4617-qk4617-dana-axle-small-knuckle-bearing-and-shim-kit\" target=\"_blank\"\u003eQK4617\u003c\/a\u003e Knuckle Bearing Kit for Dana 44 Closed Knuckle Front Axles \u003cbr\u003e\u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e\/\u003ca href=\"\/products\/20092-qu20092-drivers-side-upper-king-pin-0-010-trapezoid-knuckle-shim\" target=\"_blank\"\u003eQU20092\u003c\/a\u003e Trapezoid Knuckle Shims \u003cbr\u003e\u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e King Pin Bearing Cup for Dana 44 Closed Knuckle Front Axles \u003cbr\u003e\u003ca href=\"\/products\/8950628-qu50628-king-pin-or-knuckle-bearing-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU50628\u003c\/a\u003e King Pin Bearing for Dana 44 Closed Knuckle Front Axles \u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e 6 Bolt Inner Metal Hub Gasket for GM 3\/4 ton trucks with Dana Plastic Dial Factory Lockouts \u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e 6 Bolt Hub Gasket for Chevy, Dodge, and GMC with External Mount Lockouts \u003cbr\u003e\u003ca href=\"\/products\/1060-qt1060-taper-wedge-remover\" target=\"_blank\"\u003eQT1060\u003c\/a\u003e Taper Wedge Remover Tool\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note10\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 10:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note11\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 11:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eSaved for Future Use\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC: \u003cbr\u003e\u003c\/strong\u003e1\/2 ton and 3\/4 ton 4x4s with Closed Knuckle Dana 44 Front Axles and 7\/16\" Steering Arm Studs: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eDana 44 Closed Knuckle Front Axle with 7\/16\" Steering Arm Studs: 1960.5, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eW100, D200, W200 Dana 60 Rear Axle Shaft: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003eD200, W200 Dana 60 Rear Axle up to approx 4-1-1976 build date: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003cbr\u003eD\/W200, D\/W250 series with 6200 pound capacity Dana 60 Rear Axle: 4-2-1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 up to 11-12-1990 build date\u003cbr\u003eD\/W300, D\/W350 with standard Dana 70 Rear Axle: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 up to 11-12-1990 build date\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eDana 60 Rear Axle: 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eThose Dana 60 Rear Axle with 7\/16\" Hub to Axle Shaft Studs: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003eThose Dana 70 Rear Axle with 7\/16\" Hub to Axle Shaft Studs: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003eF100 4x4 Closed Knuckle Dana 44 Front Axle with 7\/16\" Steering Arm Studs: 1960.5, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF250 4x4 Closed Knuckle Dana 44 Front Axle with 7\/16\" Steering Arm Studs: 1960.5, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100, 1200 with Closed Knuckle Dana 44 Front Axles and 7\/16\" Steering Arm Studs: 1969, 1970, 1971\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003eFC170 with Dual Rear Wheels: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967\u003cbr\u003eJ-Series with Dual Rear Wheels: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eM715, M725, M726 Military 1-1\/4 Ton Trucks: 1967, 1968, 1969\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41660495331405,"sku":"42009","price":19.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu42009clean_2__26202_9574__71013.1707937721.1280.1280.jpg?v=1787904245"},{"product_id":"80063-qu80063-1-2-rh-thread-x-3-4-steering-arm-cone-nut-for-dana-44hd-60-70","title":"QU80063 1\/2\" RH Thread x 3\/4\" Steering Arm Cone Nut for Dana 44HD, 60, 70","description":"\u003cp\u003e\u003cstrong\u003eQU80063 1\/2\" Right Hand Thread x 3\/4\" Dana 44HD, Dana 60, Dana 70 Steering Arm Cone Nut\u003c\/strong\u003e with Angle Seat for Chevy, Dodge, Ford, GMC, IHC, and Jeep. Plated for Corrosion Resistance. QU80063 fits multiple applications including 1960-1975 Dana 44HD closed knuckle axles, 1967-1975 Dana 60 closed knuckle axles, 1957-1979 Dana 70 closed knuckle front axles, and 1975-1993 Dana 60 open knuckle front axles. For the 1975-1993 Dana 60 open knuckle axles, \u003ca href=\"\/products\/30064-qu30064-dana-60-steering-arm-stud\" target=\"_blank\" title=\"QU30064 Steering Arm Stud\"\u003eQU30064\u003c\/a\u003e is matching stud. Open knuckle applications are 1975-1993 Dodge, 1977-1991 Chevy\/GMC, and 1978-1979 plus 1985-1997 Dana 60 Front Axle Steering Arm that also functions as the Left Upper King Pin Cap. Sold individually. Order 4-8 Nuts per vehicle.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#xv\"\u003eExploded Views\u003c\/a\u003e \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"xv\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eExploded Views:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e \u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1015-exploded-view-1985-1991-ford-f350-dana-60-front-axle\" target=\"_blank\"\u003eXV1015 1985-1991 Ford F350 Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eK20\/K25\/K2500 with optional Dana 44HD Closed Knuckle Front Axle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK30\/K35\/K3500 with Dana 60 Open Knuckle Front Axle: 1977, 1978, 1979, 1980, 1981, 1982, 19832, 1984, 1985, 1986, 1987\u003cbr\u003eV3500 with Dana 60 Open Knuckle Front Axle: 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW200 with optional Dana 44HD: 1963, 1964, 1965, 1966, 1967, 1968,1969, 1970, 1971\u003cbr\u003eW300 with Dana 70: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW200 with optional Dana 60 Open Knuckle Front Axle 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eW250 with optional Dana 60 Open Knuckle Front Axle: 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW300 with Dana 60 Open Knuckle Front Axle 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eW350 with Dana 60 Open Knuckle Front Axle: 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF250 Regular Cab with optional Dana 44HD Closed Knuckle Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 Crew Cab with Dana 60 Closed Knuckle Axle: 1973, 1974, 1975\u003cbr\u003eF250 with optional Dana 60 Open Knuckle Front Axle: 1978, 1979\u003cbr\u003eF350 with Dana 60 Open Knuckle Front Axle: 1979, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e3\/4 ton 200\/1200 Series with Optional Dana 44HD FA18 Closed Knuckle Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003e1 ton 300,1300\/200 Series with Dana 70 Closed Knuckle Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e160, 1600 Loadstar 1-1\/2 Ton with Dana 70 Closed Knuckle Front Axle: 1962, 1963, 1964, 1965, 1966, 1967, 1968,1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eM715, M725, M726 Military 1-1\/4 ton with Dana 60 Closed Knuckle Front Axle: 1967, 1968, 1969\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41660686336077,"sku":"80063","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu80063_bottom_1200_clean__43959_18557__08228.1707947136.1280.1280.jpg?v=1787131623"},{"product_id":"8096523-qu8096523-1-2-20-x-1-1-4-unf-grade-8-fine-thread-hex-head-bolt","title":"QU8096523 1\/2-20 x 1 1\/4 UNF Grade 8 Fine Thread Hex Head Bolt","description":"\u003cp\u003e\u003cstrong\u003eQU8096523 1\/2-20 x 1 1\/4 USA Made Grade 8 Fine Thread Hex Head Bolt\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMade of heat treated alloy steel\u003c\/li\u003e \u003cli\u003eTensile strength: minimum 150,000 psi\u003c\/li\u003e \u003cli\u003eCold rolled, Class 2A threads, washer faced, machine pointed\u003c\/li\u003e \u003cli\u003eRockwell hardness: C32-38\u003c\/li\u003e \u003cli\u003eMeets SAE J429 Grade 8, ASTM A354 and ANSI B18.2.1 specifications\u003c\/li\u003e \u003cli\u003eYellow zinc plated for corrosion resistance\u003c\/li\u003e \u003cli\u003eMil Spec Equiv.: UNF - NASM 90727\u003c\/li\u003e \u003cli\u003eSize: 1\/2-20 x 1 1\/4\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#xv\"\u003eExploded Views\u003c\/a\u003e \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"xv\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eExploded Views:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1015-exploded-view-1985-1991-ford-f350-dana-60-front-axle\" target=\"_blank\"\u003eXV1015 1985-1991 Ford F350 Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eAll Dana 44HD, Dana 60, Dana 70 Closed Knuckle Axles in GM, Dodge, IHC, and Jeep\u003c\/p\u003e","brand":"USA Made Hardware","offers":[{"title":"Default Title","offer_id":41660810559565,"sku":"8096523","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu8096523_1_1200_clean__71196_15741__06832.1707953476.1280.1280.jpg?v=1786094897"},{"product_id":"5540343-qu40343u-used-differential-cap-bolt-for-dana-axles","title":"QU40343U Used Differential Cap Bolt for Dana Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40343U Used Differential Cap Bolt\u003c\/strong\u003e with 3\/4\" hex head for almost all Dana 44, 50, 60, 61, 70, 70HD, and 80 Front and Rear Drive Axles. Long shoulder, hardened, Grade 8 bolt is used to replace any broken, stretched, dinged or damaged differential bolt from your Dana-Spicer diff. Also use as an upgrade on older axles to replace original Grade 5 bolts. Sold individually, but requires 4 total bolts per axle. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40343-qu40343-bolt-differential-bearing-cap-dana-44-50-60-61-70-70hd-80-axles\" target=\"_blank\"\u003eQU40343\u003c\/a\u003e New Differential Cap Bolt\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eThreadlocker\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eExploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThreadlocker\u003c\/strong\u003e\u003cbr\u003e Apply medium strength blue threadlocker (\u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003eS24200\u003c\/a\u003e, \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e) to the threads before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eExploded Views\u003c\/strong\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003c\/a\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e \u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevrolet:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 60, 70, 70HD, and 80 Axles 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003e All Dana 44, 60, 70, 70HD, and 80 Axles 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 50, 60, 61, 70, 70HD, and 80 Axles 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e GMC:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 60, 70, 70HD, and 80 Axles 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e International:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 60, 61, 70, and 70HD Axles 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Jeep:\u003c\/strong\u003e\u003cbr\u003e All Dana 44, 53, 60, and 70 Axles 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660971876429,"sku":"5540343","price":1.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40343u_2_1200_clean__73729_16322__13156.1707958145.1280.1280.jpg?v=1787128175"},{"product_id":"5540010-qu40010u-used-pinion-washer","title":"QU40010U Used Pinion Washer","description":"\u003cp\u003e\u003cstrong\u003eQU40010U Used Dan Axle Pinion Washer\u003c\/strong\u003e fits between the pinion nut and pinion yoke on most Dana 25, Dana 27, Dana 30, Dana 44, Dana 50, and Dana 53 Drive Axles. Available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWhen to Replace\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWhen to Replace\u003c\/strong\u003e\u003cbr\u003eReplace your Pinion Washer if it is bent, gouged, or damaged in any way.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eInteractive Exploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010DT 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Dana 44 Front Axle Diff Bearing and Seal Kit\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ Dana 30: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eCJ Dana 44: 1986\u003cbr\u003eWrangler (YJ) Dana 30 and Dana 44: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995\u003cbr\u003eWrangler (TJ) Dana 30 and Dana 44: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006\u003cbr\u003eCherokee (XJ) Dana 30: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003eCherokee (XJ) Dana 44: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003cbr\u003eGrand Cherokee (ZJ) Dana 30: 1993, 1994, 1995, 1996, 1997, 1998\u003cbr\u003eGrand Cherokee (WJ) Dana 30: 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003eSJ and J Series Dana 44: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eComanche (MJ) Dana 44: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDana 50IFS:\u003c\/strong\u003e\u003cbr\u003e1995, 1996, 1997\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660987015245,"sku":"5540010","price":1.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40010u_A1__37736.1718819189.1280.1280.jpg?v=1787138766"},{"product_id":"5540448-qu40448u-used-dana-44-inner-pinion-bearing-oil-baffle","title":"QU40448U Used Dana 44 Inner Pinion Bearing Oil Baffle","description":"\u003cp\u003e\u003cstrong\u003eQU40448U Used Dana 44 Inner Pinion Bearing Oil Baffle\u003c\/strong\u003e is a stepped, stamped steel Oil Baffle primarily found on front axle applications. QU40448U fits between your Dana 44 axle's inner pinion bearing cup and the axle housing. The baffle slows the flow of oil from the outer pinion bearing ensuring it is properly lubricated. Available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eOnly Use with Originally Equipped\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003ePinion Depth\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOnly Use with Originally Equipped\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle\" target=\"_blank\"\u003eQU40448 \u003c\/a\u003eis not used on all Dana 44 axles. It is primarily found on front axle applications, but it should not be used unless your axle was originally equipped with one.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePinion Depth\u003c\/strong\u003e\u003cbr\u003eSince QU40448U fits between the inner pinion bearing cup and axle housing inner pinion bore face, you MUST include the thickness of the Baffle when calculating your pinion depth shim pack. Typically axles that use this Baffle will have deeper inner pinion bearing bores compared to axles that do not use the Baffle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40448U Dana 44 Inner Pinion Bearing Cup Baffle:\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009 \u003c\/a\u003ePinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010 \u003c\/a\u003ePinion Washer \u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002 \u003c\/a\u003eOuter Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311 \u003c\/a\u003eComplete Differential and Pinion Shim Kit \u003cbr\u003e\u003ca href=\"\/products\/40209-qu40209-dana-44-ring-gear-bolt\" target=\"_blank\"\u003eQU40209 \u003c\/a\u003eRing Gear Bolt \u003cbr\u003e\u003ca href=\"\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger\"\u003eQU40028 \u003c\/a\u003eInner Pinion Cup Oil Slinger\u003cbr\u003e\u003ca href=\"\/products\/50535-qu50535-dana-25-dana-44-inner-timken-pinion-bearing-cup\" target=\"_blank\"\u003eQU50535 \u003c\/a\u003eInner Pinion Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50536-qu50536-dana-25-dana-44-inner-timken-pinion-bearing\" target=\"_blank\"\u003eQU50536 \u003c\/a\u003eInner Pinion Bearing\u003cbr\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003eQU40214 \u003c\/a\u003eDifferential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576 \u003c\/a\u003eDana 44 Front Axle Diff Bearing and Seal Kit (most 1967-1993 beam type front axles) \u003cbr\u003e Inner Axle Seals will vary by year\/model, see axle specific main page below \u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044 \u003c\/a\u003eInner Pinion Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812 \u003c\/a\u003eOuter Pinion Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1818-qt1818-taper-bearing-cup-installer\" target=\"_blank\"\u003eQT1818 \u003c\/a\u003eInner Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1097-qt1097-differential-master-bearings-for-dana-44-axles\" target=\"_blank\"\u003eQT1097 \u003c\/a\u003eDifferential Master Bearings (DISCONTINUED, REFERENCE ONLY)\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032 \u003c\/a\u003eDifferential Case Spreader\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eK10, K20, K15, K25 Dana 44 Front Axles: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK20, K25 Dana 44HD Front Axles: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\/Plymouth:\u003c\/strong\u003e\u003cbr\u003eRamcharger, W100, W150, W200, W250, Traildusters with Dana 44 Front Axles: 1975, 1976, 1977, 1978, 1979\u003cbr\u003eTrailduster, Ramcharger, W150, W250 with Dana 44 Front Axles: 1980, 1981, 1982, 1983, 1984\u003cbr\u003eRamcharger, W100, W150, W200, W250, Traildusters with Dana 44 Front Axles: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100\/F150 with Dana 44 Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF250 with Dana 44 or Dana 44HD Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eBronco with Dana 44 Front Axles: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eForward Control (FC) Series Trucks with Dana 44 Front Axles: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eWagoneer\/Cherokee with Dana 44 Front Axles: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983\u003cbr\u003eGrand Wagoneer with Dana 44 Front Axles: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ-10\/J-20 with Dana 44 Front Axles: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660987048013,"sku":"5540448","price":1.98,"currency_code":"USD","in_stock":false}]},{"product_id":"42234-tk42234-1-2-fine-thread-dana-44hd-dana-60-dana-70-steering-arm-stud","title":"TK42234 1\/2\" Fine Thread Dana 44HD, Dana 60, Dana 70 Steering Arm Stud","description":"\u003cp\u003e\u003cstrong\u003eTK42234 1\/2\" SAE Fine Thread Knuckle to Steering Arm Stud\u003c\/strong\u003e for Dana 44HD, Dana 60, and Dana 70 Front Axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/42235-tk42235-long-steering-arm-stud-for-ford-f250-dana-44hd-and-dana-60-axles\" target=\"_blank\"\u003eTK42235\u003c\/a\u003e Long Length Steering Arm for Closed Knuckle Stud for Ford F250 Dana 44HD, Dana 60 Axles\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eAll Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles in GM, Dodge, IHC, and Jeep\u003c\/p\u003e","brand":"USA Made Hardware","offers":[{"title":"Default Title","offer_id":41661053927501,"sku":"42234","price":34.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk42234_thmb__74521_23746__70573.1707961494.1280.1280.png?v=1787139352"},{"product_id":"30552-tk30552-pin-steering-arm","title":"TK30552 Pin, Steering Arm","description":"\u003cp\u003eTK30552 Pin, Steering Arm\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661206790221,"sku":"30552","price":3.67,"currency_code":"USD","in_stock":false}]},{"product_id":"30557-qu30557-right-tie-rod-end-1967","title":"QU30557 Right Tie Rod End 1967-","description":"\u003cp\u003eQU30557 Right Tie Rod End 1967-1972 GM\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661207674957,"sku":"30557","price":149.98,"currency_code":"USD","in_stock":false}]},{"product_id":"30558-qu30558-left-tie-rod-end-1967-1","title":"QU30558 Left Tie Rod End 1967-1","description":"\u003cp\u003eQU30558 Left Tie Rod End 1967-1972 GM\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661207740493,"sku":"30558","price":118.98,"currency_code":"USD","in_stock":false}]},{"product_id":"30559-qu30559-tie-rod-tube-1969-only","title":"QU30559 Tie Rod Tube, 1969 only","description":"\u003cp\u003eQU30559 Tie Rod Tube, 1969 only\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661207838797,"sku":"30559","price":0.0,"currency_code":"USD","in_stock":false}]},{"product_id":"30560-qu30560-clamp-tie-rod-tube","title":"QU30560 Clamp, Tie Rod Tube","description":"\u003cp\u003eQU30560 Clamp, Tie Rod Tube\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661208035405,"sku":"30560","price":0.0,"currency_code":"USD","in_stock":false}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/60-69_gm_d44_front_small_parts__08916_3db28ae3-7014-469f-aba8-4996ecc80cf2.jpg?v=1774365939","url":"https:\/\/torqueking.com\/collections\/small-parts-1967-1969-gm-dana-44.oembed?page=2","provider":"Torque King 4x4","version":"1.0","type":"link"}