{"title":"Pinion Yokes \u0026 Seals 1962-1973 Jeep Dana 44","description":"\u003cp\u003eShop now for Pinion Yokes and Pinion Seals to fit 1962-1973 Jeep J-Series 4x4 Trucks with Dana 44 Closed Knuckle Front Axles. Great selection. In stock. Quick shipping.\u003c\/p\u003e\n\u003cp\u003eJeep used both 10 spline and 26 spline Pinion Yokes on 1957-1973 Dana 44 Closed Knuckle Front Axles depending upon the year and universal joint. The only yoke currently available is the 26 spline QU40849 which was used on the J-Series models.\u003c\/p\u003e","products":[{"product_id":"40849-qu40849-26-spline-1310-series-pinion-yoke","title":"QU40849 26 Spline 1310 Series Pinion Yoke","description":"\u003cp\u003e\u003cstrong\u003eQU40849 1310 Series Pinion Yoke for Dana 30, Dana 44, Dana 44IFS, and Dana 50IFS Axles\u003c\/strong\u003e is a USA Made, 26 spline replacement, u-bolt style pinion yoke for front or rear Dana axles from the 1960s to the 1980s. Use with \u003ca href=\"\/products\/40768-qu40768-1310-1330-driveshaft-u-bolt-kit\" target=\"_blank\"\u003eQU40768\u003c\/a\u003e U-Bolt Kit. Includes pinion slinger made to match \u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal. USA Made.\u003cbr\u003e \u003cbr\u003eAlso available while supplies last: \u003ca href=\"\/products\/5540849-qu40849u-used-26-spline-1310-series-pinion-yoke\" target=\"_blank\"\u003eQU40849U\u003c\/a\u003e Used Yoke \u003cbr\u003e \u003cbr\u003eAlso see \u003ca href=\"\/products\/40734-qu40734-s-b-type-1310-pinion-yoke-for-26-spline-pinion-shafts\" target=\"_blank\"\u003eQU40734\u003c\/a\u003e Strap and Bolt Style Yoke\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eU-Joint Specs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eAnti-Seize, Threadlocker\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eBefore Installation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003ePinion Bearing Preload\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eU-Joint Specs\u003c\/strong\u003e\u003cbr\u003eQU40849 takes external snap ring universal joints made to Spicer 1310 series dimensional specifications. The u-joint cup diameter is 1-1\/16\". The overall width is 3-7\/32\". For matching u-joints, see \u003ca href=\"\/products\/40720-tk40720-torque-king-premium-1310-driveshaft-u-joint\" target=\"_blank\"\u003eTK40720\u003c\/a\u003e Torque King® premium non-greaseable universal joint or \u003ca href=\"\/products\/40784-qu40784-greaseable-1310-series-universal-joint\" target=\"_blank\"\u003eQU40784\u003c\/a\u003e greaseable u-joint with metal backed seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAnti-Seize, Threadlocker\u003c\/strong\u003e\u003cbr\u003eTo keep the u-bolts from becoming rust frozen in your new pinion yoke, apply \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" target=\"_blank\"\u003eS9975\u003c\/a\u003e Anti-Seize to the unthreaded portion of the legs. Put some \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e Threadlocker on the nut threads before installing the nuts on the u-bolts. This is such a minor step, but you will be glad you did!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eGrease the seal lip and pinion yoke seal surface to provide initial lubrication prior to installing the yoke on the axle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Pinion Bearing Preload\u003c\/strong\u003e\u003cbr\u003ePinion bearing preload on axles that would have had this pinion yoke as original equipment was set by shims.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eThe matching parts for QU40849 yoke are: \u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Washer\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40768-qu40768-1310-1330-driveshaft-u-bolt-kit\" target=\"_blank\"\u003eQU40768\u003c\/a\u003e U-Bolt Kit\u003cbr\u003e\u003ca href=\"\/products\/40720-tk40720-torque-king-premium-1310-driveshaft-u-joint\" target=\"_blank\"\u003eTK40720\u003c\/a\u003e or \u003ca href=\"\/products\/40784-qu40784-greaseable-1310-series-universal-joint\" target=\"_blank\"\u003eQU40784\u003c\/a\u003e U-Joints\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll K5 Blazer\/Jimmy, K10\/K15\/K1500 and K20\/K25\/K2500 with 26 spline Dana 44 Front Axle: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eFront Dana 44 converted to 1310 U-Joint: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eRamcharger, W100, and W200 with Spicer front CV driveshaft: 1974, 1975.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco and F100\/F150 with Dana Front Axle and 1310 U-Joint: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF250 with Full Time Transfer Case and 1310 U-Joint: 1973, 1974, 1975, 1976, 1977, 1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003eScout with Dana 30 or Dana 44 Front and\/or Rear Axles and 1310 U-Joints: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Models with Dana 30 or Dana 44 Front and\/or Rear Axles and 1310 U-Joints: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41657344983117,"sku":"40849","price":154.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40849_side_1200_clean__15692_13073__57829.1707877811.1280.1280.jpg?v=1742522652"},{"product_id":"40215-qu40215-dana-axle-pinion-seal","title":"QU40215 Dana Axle Pinion Seal","description":"\u003cp\u003e\u003cstrong\u003eQU40215 Dana Axle Pinion Seal\u003c\/strong\u003e is an original equipment spec pinion double lip pinion yoke seal manufactured by the Dana supplier for this seal since the 1970's. Fits most 1940s to early 1990s Dana 25, Dana 27, Dana 30, or Dana 44 front or rear axles. The inboard face of the seal shell has a bead of pliable factory applied sealant. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eGrease\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eOriginal Equipment\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSeal without Deflector \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGrease\u003c\/strong\u003e\u003cbr\u003eThe seal lip is pre-greased. Lightly grease the pinion yoke seal surface to provide initial lubrication prior to installing the yoke on the axle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOriginal Equipment\u003c\/strong\u003e\u003cbr\u003eQU40215 was original equipment on older axles in which the pinion bearing preload was set by shims.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeal without Deflector\u003c\/strong\u003e\u003cbr\u003eQU40215 features a deflector that matches a groove in the pinion slinger used on older axles. Dana has consolidated Pinion Seal numbers and is now replacing QU40215 Seal with lower cost \u003ca href=\"\/products\/40461-qu40461-dana-30-44-50ifs-oem-pinion-seal\" target=\"_blank\"\u003eQU40461\u003c\/a\u003e Seal which does not have the deflector. I believe the QU40215 deflector provides better protection for the seal lip so we do not use \u003ca href=\"\/products\/40461-qu40461-dana-30-44-50ifs-oem-pinion-seal\" target=\"_blank\"\u003eQU40461\u003c\/a\u003e in place of QU40215 in our Kits but you can do so if you wish.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eThe matching axle parts for QU40215 seal are:\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Washer\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Dana 44 Front Axle Diff Bearing and Seal Kit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eFits most 1940s to early 1990s Dana 25, Dana 27, Dana 30, or Dana 44 Front or Rear Axles\u003cbr\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657453215821,"sku":"40215","price":29.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40215_3294_1600__12404_21496__76922.1707883505.1280.1280.png?v=1742527437"},{"product_id":"40734-qu40734-s-b-type-1310-pinion-yoke-for-26-spline-pinion-shafts","title":"QU40734 S\u0026B Type 1310 Pinion Yoke for 26 Spline Pinion Shafts","description":"\u003cp\u003e\u003cstrong\u003eQU40734 Strap and Bolt Type 1310 Pinion Yoke\u003c\/strong\u003e for 26 spline pinion shafts on Dana 30, Dana 44, Dana 50 front axles.\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41657469927501,"sku":"40734","price":129.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40734__88785_9449__15077.1707884184.1280.1280.jpg?v=1742527961"},{"product_id":"40768-qu40768-1310-1330-driveshaft-u-bolt-kit","title":"QU40768 1310, 1330 Driveshaft U-Bolt Kit","description":"\u003cp\u003e\u003cstrong\u003eQU40768 1210, 1310, 1330 Driveshaft U-Bolt Kit \u003c\/strong\u003efits many vintage axle, transfer case, and transmission yokes including \u003ca href=\"\/products\/40823-qu40823-1330-series-rear-output-yoke-32-spline-for-np205\" target=\"_blank\"\u003eQU40823\u003c\/a\u003e NP205 and NP208 Transfer Case Output Yoke. From the mid-1940's to the mid-1980's the majority of Chevy, Ford, GMC, and Jeep 4x2 and 4x4 vehicles up to 3\/4 ton size used u-bolt style yokes for Spicer series 1210, 1310 or 1330 series universal joints. This u-bolt kit fits a great many of those yokes. Use this Kit to replace broken or stripped original u-bolts. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eU-Bolt Specs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eApply Threadlocker\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eTech Manuals\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eU-Bolt Specs\u003c\/strong\u003e\u003cbr\u003eQU40768 U-Bolt is made to fit standard yokes for Spicer series 1210, 1310, 1330 series universal joints. The u-joint cup size is 1-1\/16\". The u-bolts have 5\/16\" shanks and the legs measure 1.406\" from center to center. These u-bolts will NOT fit Ford yokes made for the 1330F universal joint with 1-1\/8\" cups. Use \u003ca href=\"\/products\/40841-qu40841-driveshaft-u-bolt-kit-for-ford-1330f-driveshaft-u-joints\" target=\"_blank\"\u003eQU40841\u003c\/a\u003e for those Ford applications.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eApply Threadlocker\u003c\/strong\u003e\u003cbr\u003eTo keep the u-bolts from becoming rust frozen in the yokes, apply \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" target=\"_blank\"\u003eS9975\u003c\/a\u003e or \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" target=\"_blank\"\u003eS81343\u003c\/a\u003e Anti-Seize to the unthreaded portion of the legs. Put some \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e or \u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003eS24200\u003c\/a\u003e Threadlocker on the nut threads before installing the nuts on the u-bolts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTech Manuals\u003c\/strong\u003e\u003cbr\u003eTorque the nuts to the specification listed in your factory Shop Manual or my \u003ca href=\"\/products\/773000-tm3000-driveshaft-and-universal-joint-service-manual\"\u003e\u003cem\u003eTM3000 Driveshaft and Universal Joint Manual\u003c\/em\u003e\u003c\/a\u003e or \u003cem\u003e\u003ca href=\"\/products\/3510-tsb3510-vibration-balance-angles-ratings-run-out-torque-specs-service-bulletin\"\u003eTSB3510 Driveshaft Tech: Vibration, Balance, Angles, Runout and Torque Specifications\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40768 U-Bolt Kit:\u003cbr\u003e\u003ca href=\"\/products\/40720-tk40720-torque-king-premium-1310-driveshaft-u-joint\" target=\"_blank\"\u003eTK40720\u003c\/a\u003e Torque King® 1310 series premium non-greaseable u- joint (1-1\/16\" cup x 3-7\/32\" Wide)\u003cbr\u003e\u003ca href=\"\/products\/40784-qu40784-greaseable-1310-series-universal-joint\" target=\"_blank\"\u003eQU40784\u003c\/a\u003e 1310 Series USA Made Greaseable U-Joint (1-1\/16\" cup x 3-7\/32\" Wide)\u003cbr\u003e\u003ca href=\"\/products\/40721-tk40721-torque-king-premium-1330-series-u-joint-cold-forged-cross\" target=\"_blank\"\u003eTK40721\u003c\/a\u003e Torque King® 1330 series premium non-greaseable u-joint (1-1\/16\" cup x 3-5\/8\" Wide)\u003cbr\u003e\u003ca href=\"\/products\/40774-qu40774-hot-forged-greaseable-1330-series-u-joint\" target=\"_blank\"\u003eQU40774\u003c\/a\u003e 1330 Series USA Made Greaseable U-Joint (1-1\/16\" cup x 3-5\/8\" Wide)\u003cbr\u003e\u003ca href=\"\/products\/40772-qu40772-greaseable-1310-x-1330-series-unequal-length-cross-u-joint\" target=\"_blank\"\u003eQU40772\u003c\/a\u003e 1310 x 1330 Series USA Made Greaseable U-Joint (1-1\/16\" cup x 3-7\/32\" x 3-5\/8\")\u003cbr\u003e\u003ca href=\"\/products\/40735-qu40735-universal-joint-strap-bolt-kit-spicer-type-1310-1330-yokes\" target=\"_blank\"\u003eQU40735\u003c\/a\u003e Strap and Bolt Kit for most current production yokes\u003cbr\u003e\u003ca href=\"\/products\/40849-qu40849-26-spline-1310-series-pinion-yoke\" target=\"_blank\"\u003eQU40849\u003c\/a\u003e 26 Spline Dana 30, Dana 44, Dana 50 Pinion Yoke (U-Bolt Style)\u003cbr\u003e\u003ca href=\"\/products\/40847-qu40847-1310-series-29-spline-dana-60-dana-70-pinion-yoke\" target=\"_blank\"\u003eQU40847\u003c\/a\u003e 29 Spline Dana 60 Pinion Yoke (U-Bolt Style)\u003cbr\u003e\u003ca href=\"\/products\/40785-qu40785-1310-x-6-x-1-3-8-16-spline-greaseable-slip-yoke\" target=\"_blank\"\u003eQU40785\u003c\/a\u003e 6\" Long x 16 Spline 1310 Series Slip Yoke\u003cbr\u003e\u003ca href=\"\/products\/40753-qu40753-6-7-8-x-1310-greaseable-slip-yoke-and-press-on-seal\" target=\"_blank\"\u003eQU40753\u003c\/a\u003e 6-7\/8\" x 16 Spline 1310 Series Slip Yoke\u003cbr\u003e\u003ca href=\"\/products\/40927-qu40927-1310-x-7-7-8-x-1-3-8-16-spline-greaseable-slip-yoke\" target=\"_blank\"\u003eQU40927\u003c\/a\u003e 8-7\/8\" Long x 16 Spline 1310 Series Slip Yoke\u003cbr\u003e\u003ca href=\"\/products\/40823-qu40823-1330-series-rear-output-yoke-32-spline-for-np205\" target=\"_blank\"\u003eQU40823\u003c\/a\u003e 1330 Series 32 Spline NP205 Transfer Case Yoke (U-Bolt Type)\u003cbr\u003e\u003ca href=\"\/products\/40928-qu40928-1330-x-6-x-1-3-8-15-16-spline-greaseable-slip-yoke\" target=\"_blank\"\u003eQU40928\u003c\/a\u003e 6\" Long x 16 Spline 1330 Series Slip Yoke\u003cbr\u003e\u003ca href=\"\/products\/40845-qu40845-greaseable-long-reach-1330-series-16-spline-slip-yoke\" target=\"_blank\"\u003eQU40845\u003c\/a\u003e 7-1\/2\" Long x 16 Spline 1330 Series Slip Yoke\u003cbr\u003e\u003ca href=\"\/products\/40881-qu40881-1-3-8-1310-32-spline-slip-yoke-for-gm\" target=\"_blank\"\u003eQU40881\u003c\/a\u003e 31 spline based on 32 Spline Slip Yoke for Chevy and GMC\u003cbr\u003e\u003ca href=\"\/products\/2084-qk2084-1330-series-rear-output-yoke-kit-with-32-spline-yoke-np205\" target=\"_blank\"\u003eQK2084\u003c\/a\u003e 1330 Series NP205F Yoke Kit\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex® Plus Synthetic Grease\u003cbr\u003eFor U-Joint Service Tools, See our \u003ca href=\"\/collections\/u-joint-and-driveshaft-tools\" target=\"_blank\"\u003eU-Joint Tools\u003c\/a\u003e Web Page.\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eToo numerous to list by vehicle. Verify dimensions of your original u-bolts match those given above in the Tech Notes\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657512525901,"sku":"40768","price":14.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40768_1200_clean__41307_12007__83558.1707885677.1280.1280.jpg?v=1742529075"},{"product_id":"40391-qu40391-1350-dana-30-44-50-heavy-duty-pinion-yoke","title":"QU40391 1350 Dana 30\/44\/50 Heavy Duty Pinion Yoke","description":"\u003cp\u003e\u003cstrong\u003eQU40391 Heavy-Duty Pinon Yoke\u003c\/strong\u003e for 1960's-up Dana 30, Dana 44, and Dana 50 axles. 26 Spline, 1350 Series. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMatching Parts\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40709-qu40709-universal-joint-strap-and-bolt-kit-for-spicer-1350-or-1410-yokes\" target=\"_blank\"\u003eQU40709\u003c\/a\u003e U-Joint Strap and Bolt Kit\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e1960's-up Dana 30, Dana 44, and Dana 50 Axles\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657699532877,"sku":"40391","price":196.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40391clean__10642_9233__56321.1707890622.1280.1280.jpg?v=1742533736"},{"product_id":"452456-yms5778-yukon-replacement-pinion-seal-for-dana-25-27-30-36-44-50","title":"YMS5778 Yukon Replacement Pinion Seal for Dana 25\/27\/30\/36\/44\/50","description":"\u003cp\u003e\u003cstrong\u003eYMS5778 Yukon Replacement Pinion Seal for\u003c\/strong\u003e Dana 25 \/ 27 \/ 30 \/ 36 \/ 44 \/ 50 axles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eChevrolet \/ Chevy Blazer (1969-1974)\u003cbr\u003eChevrolet \/ Chevy Suburban 1\/2 Ton (1960-1980)\u003cbr\u003eChevrolet \/ Chevy Suburban 3\/4 Ton (1960-1978)\u003cbr\u003eChevrolet \/ Chevy K5 Blazer (4WD) (1975-1980)\u003cbr\u003eChevrolet \/ Chevy K20\/K2500 3\/4 Ton (4WD) (1962-1978)\u003cbr\u003eChevrolet \/ Chevy K30\/ K3500 1 Ton (4WD) (1968-1974)\u003cbr\u003eChevrolet \/ Chevy C10 1\/2 Ton (2WD) (1967-1968)\u003cbr\u003eChevrolet \/ Chevy Corvette (1984-1996)\u003cbr\u003eChevrolet \/ Chevy C\/K 1500 (1961-1980)\u003c\/p\u003e \u003cp\u003eGMC K15\/ K1500 1\/2 Ton (4WD) (1966-1980)\u003cbr\u003eGMC K25\/ K2500 3\/4 Ton (4WD) (1967-1980)\u003cbr\u003eGMC Suburban 1\/2 Ton (1963-1980)\u003cbr\u003eGMC C15\/ C1500 1\/2 Ton (2WD) (1967-1968)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\/Ram:\u003c\/strong\u003e\u003cbr\u003eDodge Ram 1500 1\/2 Ton (1994-2001)\u003cbr\u003eDodge W150 1\/2 Ton 4x4 (1977-1993)\u003cbr\u003eDodge Ram 2500 3\/4 Ton (1994-2002)\u003cbr\u003eDodge Ram Charger (1974-1994)\u003cbr\u003eDodge W100 1\/2 Ton 4x4 (1968-1989)\u003cbr\u003eDodge W200 3\/4 Ton 4x4 (1960-1980)\u003cbr\u003eDodge W250 3\/4 Ton 4x4 (1981-1993)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eFord F-150 1\/2 Ton (1975-1996)\u003cbr\u003eFord Bronco (1966-1996)\u003cbr\u003eFord F-250 3\/4 Ton (1966-1998)\u003cbr\u003eFord Aerostar (1987-1989)\u003cbr\u003eFord F-100 1\/2 Ton (1966-1979)\u003cbr\u003eFord F-350 1 Ton (1980-1985)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003eInternational Scout 800 (1966-1971)\u003cbr\u003eInternational Scout 80 (1961-1965)\u003cbr\u003eInternational Scout II (1971-1980)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJeep CJ5 (1959-1983)\u003cbr\u003eJeep Grand Cherokee (1993-1998)\u003cbr\u003eJeep Wrangler YJ (1987-1995)\u003cbr\u003eJeep J10 (1974-1988)\u003cbr\u003eJeep CJ8 (1981-1985)\u003cbr\u003eJeep Wrangler TJ non-Rubicon (1997-2006)\u003cbr\u003eJeep Commando (1966-1973)\u003cbr\u003eJeep CJ6 (1959-1975)\u003cbr\u003eJeep Cherokee XJ Sport (1984-1998)\u003cbr\u003eJeep Wagoneer (1963-1990)\u003cbr\u003eJeep Comanche (1986-1992)\u003cbr\u003eJeep CJ7 (1976-1986)\u003cbr\u003eJeep Cherokee XJ (1984-1998)\u003cbr\u003eJeep Grand Wagoneer (1984-1993)\u003c\/p\u003e","brand":"Randys R P","offers":[{"title":"Default Title","offer_id":41659501969485,"sku":"452456","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/YMS5778__65153_22471__12673.1707916378.1280.1280.jpg?v=1778717267"},{"product_id":"5540849-qu40849u-used-26-spline-1310-series-pinion-yoke","title":"QU40849U Used 26 Spline 1310 Series Pinion Yoke","description":"\u003cp\u003e\u003cstrong\u003eQU40849U Good Used 1310 Series Pinion Yoke for Dana 30, Dana 44, Dana 44IFS, and Dana 50IFS Axles\u003c\/strong\u003e is a good used, USA Made, u-bolt style pinion yoke for front or rear Dana axles with 26 spline pinions on vehicles from the 1960s to the 1990s. Use with \u003ca href=\"\/products\/40768-qu40768-1310-1330-driveshaft-u-bolt-kit\" target=\"_blank\"\u003eQU40768\u003c\/a\u003e U-Bolt Kit. Includes pinion slinger made to match \u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal. Available while supply lasts!\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40849-qu40849-26-spline-1310-series-pinion-yoke\" target=\"_blank\"\u003eQU40849\u003c\/a\u003e New 1310 Series Pinion Yoke\u003cbr\u003eAlso See: \u003ca href=\"\/products\/40734-qu40734-s-b-type-1310-pinion-yoke-for-26-spline-pinion-shafts\" target=\"_blank\"\u003eQU40734\u003c\/a\u003e Strap and Bolt Style Yoke\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eExternal SR U-Joints\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eApply Threadlocker\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eGrease\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note5\"\u003eShims\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003eAlternative Parts\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eExternal SR U-Joints\u003c\/strong\u003e\u003cbr\u003eQU40849U takes external snap ring universal joints made to Spicer 1310 series dimensional specifications. The u-joint cup diameter is 1-1\/16\". The overall width is 3-7\/32\". For matching u-joints, see \u003ca href=\"\/products\/40720-tk40720-torque-king-premium-1310-driveshaft-u-joint\" target=\"_blank\"\u003eTK40720\u003c\/a\u003e Torque King® premium non-greaseable universal joint or \u003ca href=\"\/products\/40784-qu40784-greaseable-1310-series-universal-joint\" target=\"_blank\"\u003eQU40784\u003c\/a\u003e greaseable u-joint with flexible nitrile rubber seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eApply Threadlocker\u003c\/strong\u003e\u003cbr\u003eTo keep the u-bolts from becoming rust frozen in your new pinion yoke, apply \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" target=\"_blank\"\u003eS9975\u003c\/a\u003e Anti-Seize to the unthreaded portion of the legs. Put some \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e Threadlocker on the nut threads before installing the nuts on the u-bolts. This is such a minor step, but you will be glad you did!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGrease\u003c\/strong\u003e\u003cbr\u003eGrease the seal lip and pinion yoke seal surface to provide initial lubrication prior to installing the yoke on the axle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Washer\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40768-qu40768-1310-1330-driveshaft-u-bolt-kit\" target=\"_blank\"\u003eQU40768\u003c\/a\u003e U-Bolt Kit\u003cbr\u003e\u003ca href=\"\/products\/40720-tk40720-torque-king-premium-1310-driveshaft-u-joint\" target=\"_blank\"\u003eTK40720\u003c\/a\u003e or \u003ca href=\"\/products\/40784-qu40784-greaseable-1310-series-universal-joint\" target=\"_blank\"\u003eQU40784\u003c\/a\u003e U-Joints\u003cbr\u003e\u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" target=\"_blank\"\u003eS9975\u003c\/a\u003e Anti-Seize\u003cbr\u003e\u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e Threadlocker\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eShims\u003c\/strong\u003e\u003cbr\u003ePinion bearing pre-load on axles that would have had this pinion yoke as original equipment was set by shims.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAlternative Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40849-qu40849-26-spline-1310-series-pinion-yoke\" target=\"_blank\"\u003eQU40849\u003c\/a\u003e New 1310 Series Pinion Yoke, U-Bolt Style\u003cbr\u003e\u003ca href=\"\/products\/40734-qu40734-s-b-type-1310-pinion-yoke-for-26-spline-pinion-shafts\" target=\"_blank\"\u003eQU40734\u003c\/a\u003e New 1310 Series Pinion Yoke, Strap \u0026amp; Bolt Style\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll K5 Blazer\/Jimmy, K10\/K15\/K1500 and K20\/K25\/K2500 with 26 spline Dana 44 Front Axle: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eFront Dana 44 converted to 1310 U-Joint: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eRamcharger, W100, and W200 with Spicer front CV driveshaft: 1974, 1975, 1975.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco and F100\/F150 with Dana Front Axle and 1310 U-Joint: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF250 with Full Time Transfer Case and 1310 U-Joint: 1973, 1974, 1975, 1976, 1977, 1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003eScout with Dana 30 or Dana 44 Front and\/or Rear Axles and 1310 U-Joints: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Models with Dana 30 or Dana 44 Front and\/or Rear Axles and 1310 U-Joints: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660075147341,"sku":"5540849","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40849u__05785_9478__11874.1707922857.1280.1280.jpg?v=1742660131"},{"product_id":"40934-qu40934-26-spline-1350-series-u-bolt-pinion-yoke-for-dana-44-50-axles","title":"QU40934 26 Spline 1350 Series U-Bolt Pinion Yoke for Dana 44, 50 Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40934 U-Bolt Pinion Yoke\u003c\/strong\u003e for Dana 44 and Dana 50 axles. 26 Spline, 1350 Series.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41660472066125,"sku":"40934","price":209.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40934_A4__27359.1718819712.1280.1280.jpg?v=1742686500"},{"product_id":"40958-qu40958-1310-yoke-for-gm","title":"QU40958 1310 Yoke for GM","description":"\u003cp\u003e\u003cstrong\u003eQU40958 1310 Yoke for GM\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFor Strap \u0026amp; Bolt Kit, See \u003ca href=\"\/products\/40960-qu40960-1310-1330-strap-and-bolt-kit-for-qu40958\" target=\"_blank\"\u003eQU40960\u003c\/a\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41660474261581,"sku":"40958","price":142.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40958side_lg_cleanD__87526_9537__67094.1707937397.1280.1280.jpg?v=1742686869"},{"product_id":"5540734-qu40734u-strap-and-bolt-type-26-spl-1310-pinion-yoke","title":"QU40734U Strap and Bolt Type 26 Spl 1310 Pinion Yoke","description":"\u003cp\u003e\u003cstrong\u003eQU40734U Used Strap and Bolt Type 1310 Pinion Yoke\u003c\/strong\u003e for 26 spline pinion shafts on Dana 30, Dana 44, Dana 50 front axles.\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41661505634381,"sku":"5540734","price":45.0,"currency_code":"USD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/pinion_20yokes_20and_20pinion_20seals__40453_36668d6e-beee-4485-b74d-5b4fdfe7545c.jpg?v=1773182288","url":"https:\/\/torqueking.com\/collections\/pinion-yokes-seals-1962-1973-jeep-dana-44.oembed","provider":"Torque King 4x4","version":"1.0","type":"link"}