{"title":"Hubs 1976-1979 F-Series \u0026 Bronco Dana 44F","description":"\u003cp\u003eShop now for Hubs, Hub and Wheel Parts to fit 1976-1979 Ford Bronco, F-100, and F-150 Trucks with Dana 44 Open Knuckle Front Axles.\u003c\/p\u003e\n\u003cp\u003eDrum brakes were used by Ford on the Dana 44 up to 1975. 1976 to 1979 4x4s all have front disc brakes. The wheel hubs are not interchangeable between disc and drum brakes. Most 1966-1973 era Ford 4x4s were delivered with lockout hubs as are all the 1974-1979 vehicles with part time transfer cases. Solid, splined hub gears were used on bone stock 1966-1973 models and all 1974-1979 units with the NP203 full time transfer case. Over the years, just about all the splined hub drive gears have been replaced with lockout hubs.\u003c\/p\u003e","products":[{"product_id":"4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set","title":"QK4918 Hub Service Kit for QU56018 Warn Manual Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQK4918 Hub Service Kit\u003c\/strong\u003e for \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Manual Hub Set.\u003c\/p\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":41656299847757,"sku":"4918","price":66.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4918_1600__41065.1721237300.1280.1280.png?v=1742481179"},{"product_id":"4954-qk4954-hub-service-kit-for-qu51181-warn-premium-manual-hub-set","title":"QK4954 Hub Service Kit for QU51181 Warn Premium Manual Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQK4954 Hub Service Kit\u003c\/strong\u003e for \u003ca href=\"\/products\/51181-qu51181-warn-20990-premium-hub-set-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU51181\u003c\/a\u003e Warn Premium Manual Hub Set on Dana 44 and GM 10 bolt front axles.\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656307384397,"sku":"4954","price":60.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4954_clean__10221_7430__40608.1707828865.1280.1280.jpg?v=1742481730"},{"product_id":"40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs","title":"QU40035 Hub Spring Plate or Spring Cup for Splined 4x4 Wheel Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40035 Hub Spring Plate or Spring Cup for Splined 4x4 Wheel Hubs\u003c\/strong\u003e fits between the \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e hub spring and the outer wheel bearing cup on SUV's, and pickups with Dana Spicer Model 30, Model 44 or GM 10 Bolt front drive axles equipped with internal mount, Spicer factory lock out hubs or full time drive gears. These Spring Plates were used on most of the late 1960's to mid 1980's Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with internal splined front wheel hubs. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5540035-qu40035u-used-hub-spring-plate\" target=\"_blank\"\u003eQU40035U\u003c\/a\u003e Used Hub Spring Plate or Spring Cup available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eFactory Hub Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpicer ONLY Spring Plate\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThese 2.89\" diameter, cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring! Properly installed, the large diameter end of QU40035 Spring Plate will fit against the outer bearing cup on the inboard side. The function of this part is to protect the outer wheel bearing from the spring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFactory Hub Parts\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and QU40035 Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer ONLY Spring Plate\u003c\/strong\u003e\u003cbr\u003eQU40035 Spring Plate is NOT used with Warn or any other aftermarket hub-lock. QU40035 is only used with Spicer factory plastic dial hubs or with full time splined hub drive gears that are held under tension by \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e spring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMatching Parts for QU40035 Hub Plate:\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears \u003cbr\u003e\u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Ring \u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Hub Spring \u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Outer Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e(part will fit these models but may not have been original equipment for all years)\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW150, W250 with Dana 44 axle: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW100: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco (Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3330 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979\u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41656945639501,"sku":"40035","price":11.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40035_1200_clean__44057_11651__75894.1707861021.1280.1280.jpg?v=1742509960"},{"product_id":"40044-qu40044-o-ring-spicer-lockout-hub-dial-dana-30-dana-44-gm-10b","title":"QU40044 O-Ring, Spicer Lockout Hub Dial Dana 30, Dana 44, GM 10B","description":"\u003cp\u003e\u003cstrong\u003eQU40044 Spicer Hub Dial O-Ring\u003c\/strong\u003e for Dana-Spicer original equipment plastic dial, spline mount factory hubs used on Dana 30, Dana 44 and GM 10 bolt front axles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installing\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003eCoat O-Ring with a thin film of petroleum jelly before installing it on the dial.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears \u003cbr\u003e\u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Ring \u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Hub Spring \u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/30266-qu30266u-used-splined-spicer-hub-lock-with-gold-or-yellow-dial\" target=\"_blank\"\u003eQU30266U\u003c\/a\u003e Used Spicer Hub Lock for Chevy\/GMC\u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Outer Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eK10, K15 GMC Jimmy with Dana 44 Front Axles and Internally Splined Wheel Hubs: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20, K25 with Dana 44 Front Axles and Internally Splined Wheel Hubs: 1977.5, 1978, 1979, 1980\u003cbr\u003eK10, K15, K20, K25 with GM 10 Bolt Front Axles and Internally Splined Wheel Hubs: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eBronco with Dana 30 Front Axles and Internally Splined Wheel Hubs: 1968, 1969, 1970, 1971\u003cbr\u003eF-250 with Dana 44 Front Axles and Internally Splined Wheel Hubs: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1977.5, 1978, 1979\u003cbr\u003eF-100, F-150 with Dana 44 Front Axles and Internally Splined Wheel Hubs: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eBronco with Dana 44 Front Axles and Internally Splined Wheel Hubs: 1978, 1979\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41656948916301,"sku":"40044","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40044__59619_9024__72599.1707861180.1280.1280.jpg?v=1742510088"},{"product_id":"40045-qu40045-o-ring-spicer-lockout-hub-cap-to-wheel-hub-d30-d44-gm-10b","title":"QU40045 O-Ring, Spicer Lockout Hub Cap to Wheel Hub D30, D44, GM 10B","description":"\u003cp\u003e\u003cstrong\u003eQU40045 Hub Cap (Hub Body) O-Ring\u003c\/strong\u003e for Spicer Internal Mount, Plastic Dial Hubs on Ford and GM 4x4's with Dana 30, Dana 44 or GM 10 bolt front axles.\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41656949309517,"sku":"40045","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40045_clean__86669_9025__78044.1707861190.1280.1280.jpg?v=1742510105"},{"product_id":"40046-qu40046-hub-screw-for-dana-plastic-dial-internal-spline-mount-hubs","title":"QU40046 Hub Screw for Dana Plastic Dial Internal Spline Mount Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40046 Hub Screw\u003c\/strong\u003e for Dana plastic dial internal spline mount Dana 30 and Dana 44 hubs. Ford F150, Bronco, Dana 44 1978-1979\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656949866573,"sku":"40046","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40046_clean__23907_18775__76481.1707861210.1280.1280.jpg?v=1742510121"},{"product_id":"40047-qu40047-copper-hub-sealing-washer-for-spicer-spline-mount-hub-locks","title":"QU40047 Copper Hub Sealing Washer for Spicer Spline Mount Hub Locks","description":"\u003cp\u003e\u003cstrong\u003eQU40047 Copper Hub Sealing Washer for Spicer Spline Mount, Plastic Dial Locking Hubs\u003c\/strong\u003e used on many 1968-1981 Chevy or GMC and 1968-1979 Ford 4x4 Front Axles. QU40047 seals water out and lubricant in your Spicer plastic dial hubs. Often lost or overlooked, these little guys do a big job. QU40047 fits Spicer spline mount factory hubs on Ford Dana 30, GM Dana 44, GM 10 Bolt, Ford Dana 44, GM Dana 60, and Ford Dana 60 front axles with Spicer Hubs. VERY Limited Supply, When They are Gone, They Will Be Gone Forever! Sold individually.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eParts Availability\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eLubrication\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts for Small Hubs (Dana 30, Dana 44, GM 10 Bolt)\u003c\/strong\u003e \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eParts Availability\u003c\/strong\u003e\u003cbr\u003eSpicer Dana plastic dial hub parts production ended in 1980-1981 so most parts stocks are now nearly exhausted.  While Spicer hub locks were durable, by now, most 1968-1981 trucks have either been crushed or have had the original Spicer Hubs replaced by Warn 9790 (M248) for Dana 30\/44\/GM 10 Bolt axles or Warn 11690 (M256) for Dana 60 axles or by aftermarket hubs.  Check the torqueking.com web site for current parts availability.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubrication\u003c\/strong\u003e\u003cbr\u003eTo insure proper hub operation and also protect against corrosion, apply a very THIN film of a quality grease to the internal hub components. Spicer recommended Moly XL hi-speed grease for the internals and Parker \"O\" Ring Lube (now O-Lube) for the o-rings. Since I did not have ready access to either product, I always used the same grease type as the wheel bearings. The specific grease is probably not as important as the proper quantity. Not enough grease will will lead to both corrosion and metal to metal wear. Too much grease will hinder the locking function of the hubs especially in cold climates.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for Small Hubs (Dana 30, Dana 44, GM 10 Bolt)\u003c\/strong\u003e\u003cbr\u003eUnder Construction\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for Large Hubs (Dana 60)\u003c\/strong\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" rel=\"noopener\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/4962-tka4962-splined-4x4-front-wheel-hub-for-srw-dana-60-chevy-dodge-gmc\" rel=\"noopener\" target=\"_blank\"\u003eTKA4962\u003c\/a\u003e Front Wheel Hub for GM\u003cbr\u003e\u003ca href=\"\/products\/40330-qu40330-dana-60-outer-axle-shaft-for-1975-1993-dodge-1977-1991-gm\" rel=\"noopener\" target=\"_blank\"\u003eQU40330\u003c\/a\u003e 30 Spline Outer Axle Shaft for GM\u003cbr\u003e\u003ca href=\"\/products\/20332-tka20332-new-torque-king-front-wheel-hub-for-1978-1994-f250-f350\" rel=\"noopener\" target=\"_blank\"\u003eTKA20332\u003c\/a\u003e Front Wheel Hub for Ford\u003cbr\u003e\u003ca href=\"\/products\/40486-qu40486-30-spline-outer-axle-shaft-for-1978-1988-5-ford-dana-60-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40486\u003c\/a\u003e 30 Spline Outer Axle Shaft for Ford\u003cbr\u003e\u003ca href=\"\/products\/56011-qu56011-warn-11690-dana-50-dana-60-internal-spline-mount-hub-locks\" rel=\"noopener\" target=\"_blank\"\u003eQU56011\u003c\/a\u003e Warn M256 Hub Set\u003cbr\u003e\u003ca href=\"\/products\/56111-qu56111-mile-marker-449ss-dana-50-dana-60-stainless-hublock-set\" rel=\"noopener\" target=\"_blank\"\u003eQU56111\u003c\/a\u003e Mile Marker Stainless Steel Hub Set\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eK5, K10, K15, K1500 Blazer, Jimmy, Suburban, or Truck: 1968 (late), 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK20, K25, K2500 Suburban or Truck: 1977, 1978, 1979, 1980\u003cbr\u003eK30, K35: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003e\u003c\/strong\u003eF150, Bronco, Dana 44 1978-1979\u003cbr\u003eF250 with Dana 44 3300 Pound rated Closed Knuckle Front Axle: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 with Dana 44 Open Knuckle Front Axle: 1977 (Late), 1978, 1979\u003cbr\u003eF250 with optional Dana 60 front Axle: 1978, 1979\u003cbr\u003eF350: 1979\u003c\/p\u003e","brand":"Spicer","offers":[{"title":"Default Title","offer_id":41656950882381,"sku":"40047","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40047-1.png?v=1771946253"},{"product_id":"40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles","title":"QU40050 Spicer Hub Spring for Dana 30, Dana 44, GM 10 Bolt Axles","description":"\u003cp\u003e\u003cstrong\u003e QU40050 Spicer Tapered Hub Spring\u003c\/strong\u003e for SUV's, and pickups with Dana Spicer Model 30, Model 44 or GM 10 Bolt front drive axles equipped with internal mount, Spicer lock out hubs or full time drive gears. These springs were used on most of the late 1960's to mid 1980's Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with internal splined front wheel hubs. USA Made.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAlso Available While Supplies Last: \u003cstrong\u003e\u003ca href=\"\/products\/5540050-qu40050u-used-spicer-hub-spring-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050U\u003c\/a\u003e Used Spicer Tapered Hub Spring\u003c\/strong\u003e.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eTo Install\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpring Length\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpicer Factory Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Install\u003c\/strong\u003e\u003cbr\u003e The large, inboard end of QU40050 Spring rests against \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate. If the plate is damaged, replace it at the same time you replace the spring. \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring Length\u003c\/strong\u003e\u003cbr\u003e The free length of these new springs is about 3-11\/16\" (+\/- 1\/8\"). Most used Springs are shorter as they have weakened over time.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Factory Hubs\u003c\/strong\u003e\u003cbr\u003e Spicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, QU40050 Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e (part will fit these models but may not have been original equipment for all years)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC\u003c\/strong\u003e: \u003cbr\u003e K5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 19067, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003e K20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003e W100: 1969, 1970, 1971, 1972, 1973, 1974 \u003cbr\u003e W150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e F100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003e Bronco (Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003e F150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989 \u003cbr\u003e F150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003e F250 with 3330 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003e F250 (Dana 44): 1978, 1979 \u003cbr\u003e F250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e 1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e Cherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 \u003cbr\u003e J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 \u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656951767117,"sku":"40050","price":14.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40050__04915_9028__84612.1707861302.1280.1280.jpg?v=1742510187"},{"product_id":"20348-qu20348-new-splined-front-disc-brake-wheel-hub","title":"QU20348 New Splined Front Disc Brake Wheel Hub","description":"\u003cp\u003e\u003cstrong\u003eQU20348 1976-1992 F150, Bronco Splined Front Disc Brake Wheel Hub \u003c\/strong\u003e is a brand new internally splined front wheel hub with studs and factory installed wheel bearing cups that fits all 1976-1986, most 1987-1988 and all 1989-1992 Ford F100, F150 and full size Bronco 4x4s. \u003cbr\u003e\u003cbr\u003eAlso see \u003ca href=\"\/products\/21069-qu21069-hub-brake-rotor-assembly-for-1976-1993-f100-f150-bronco\"\u003eQU21069\u003c\/a\u003e Hub and Rotor Assembly.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003e1987-1988\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eIncludes\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#safety\"\u003eNever Reuse Wheel Bolts\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eUse New Bearings with New Bearing Cups\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eAfter Assembly\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1987-1988\u003c\/strong\u003e\u003cbr\u003eFor the 1987 and 1988 model year vehicles built to March 1988 (on some models to May 1988), Ford Broncos and F150 4x4s with factory manual hubs have a unique, one piece \"pancake\" hub\/rotor with two large diameter, close set wheel bearings. The lockout hub is a flange mount type that fits over the wheel studs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003eQU20348 includes:\u003cbr\u003e5 Bolt Wheel Hub\u003cbr\u003e5 Wheel Bolts\u003cbr\u003eInner and Outer Wheel Bearing Cups\u003c\/p\u003e \u003cp\u003e\u003ca name=\"safety\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eSafety Notes:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNever Reuse Wheel Bolts\u003c\/strong\u003e\u003cbr\u003eFor safety reasons, never reuse wheel bolts (studs). New wheel bolts are included with this Kit.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse New Bearings with New Bearing Cups\u003c\/strong\u003e\u003cbr\u003eA used bearing should not be mated to a new bearing cup. For maximum wheel bearing life, it is imperative that new wheel bearings be used with the factory installed bearing cups in your new wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAfter Assembly\u003c\/strong\u003e\u003cbr\u003eIt is relatively unusual for a big 4x4 brake rotor to have less than the maximum allowable runout and rotor thickness variation once it is assembled to a wheel hub. This is due to manufacturing tolerances of the parts and the pressures exerted on the hub and rotor when pressing in the wheel studs. After assembling your brake rotor to the new hub, the rotor should be checked for thickness variation (0.001\" {0.025 mm} maximum) and runout (0.005\" {0.127 mm} maximum with 0.003\" or less preferred). A rotor that is out of tolerance should be machined with an on-the-vehicle brake lathe if possible or on an accurate bench type brake lathe.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching parts and tools for QU20348 Hub are:\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU90001 \u003c\/a\u003eWheel Seal \u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken® Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50578-qu50578-timken-tapered-wheel-or-diff-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50578 \u003c\/a\u003eTimken® Inner Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" rel=\"noopener\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Round Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4770 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Tanged Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/40106-qu40106-ratchet-type-spindle-nut-for-1985-1992-ford-dana-44ifs\" rel=\"noopener\" target=\"_blank\"\u003eQU40106 \u003c\/a\u003eRatchet Type Spindle Nut (1985-1992)\u003cbr\u003e\u003ca href=\"\/products\/40192-qu40192-front-spindle-kit-for-1976-1979-ford-dana-44\" rel=\"noopener\" target=\"_blank\"\u003eQU40192 \u003c\/a\u003eSpindle for 1976-1979\u003cbr\u003e\u003ca href=\"\/products\/40309-qu40309-spindle-for-1980-1992-dana-44ifs\" rel=\"noopener\" target=\"_blank\"\u003eQU40309 \u003c\/a\u003eSpindle for 1980-1992 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" rel=\"noopener\" target=\"_blank\"\u003eQU56018 \u003c\/a\u003eWarn Manual Lockout Hub Set \u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" rel=\"noopener\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" rel=\"noopener\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/QU40657U Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40427 \u003c\/a\u003eChrome Hub Cap for use with Splined Hub Gear\u003cbr\u003e\u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" rel=\"noopener\" target=\"_blank\"\u003eQT1012i \u003c\/a\u003e4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" rel=\"noopener\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003eProtection Plus Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/1504-qt1504-dana-30-dana-44-and-gm-10-bolt-front-wheel-seal-installer\" rel=\"noopener\" target=\"_blank\"\u003eQT1504 \u003c\/a\u003eWheel Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" rel=\"noopener\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003eBronco, F100, F150: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eBronco, F150 with Axle Tag Numbers 610268 or 610310: 1988\u003cbr\u003eBronco and F150: 1989, 1990, 1991, 1992\u003cbr\u003e\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657217515597,"sku":"20348","price":124.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20348_0662_1600__80360_19747__02804.1707872972.1280.1280.png?v=1742518953"},{"product_id":"20389-qu20389u-one-functional-used-dana-factory-lockout-hub-and-red-dial","title":"QU20389U One Functional Used Dana Factory Lockout Hub and Red Dial","description":"\u003cp\u003e\u003cstrong\u003eQU20389U One Functional Used Dana Factory Lockout Hub and Red Dial\u003c\/strong\u003e fits 1959-1996 Ford Bronco, F100, F150, and F250 with Dana 30 or Dana 44 front axles with splined wheel hubs. Available while supplies last.\u003c\/p\u003e \u003cp\u003eComplete except for \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate which must be ordered separately.\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41657233440845,"sku":"5520389","price":99.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20389uclean__34221_8512__47945.1707873498.1280.1280.jpg?v=1742519361"},{"product_id":"20471-qu20471-1-2-front-wheel-stud-or-bolt-for-1976-1977-5-ford-f250-4x4s-76-96-f150-bronco","title":"QU20471 1\/2\" Front Wheel Stud or Bolt for 1976-1977.5 Ford F250 4x4s, 76-96 F150  \u0026 Bronco","description":"\u003cp\u003e\u003cstrong\u003eQU20471 Front Wheel Stud or Bolt\u003c\/strong\u003e, 1\/2\", for 1976-1977.5 Ford F250 4x4 trucks. 76-77 F100, 78-96 Bronco, F150, Dana 44 1978-1979.\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657365954637,"sku":"20471","price":4.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20471_1200_clean__13752_12980__60906.1707878246.1280.1280.jpg?v=1742522964"},{"product_id":"40598-qu40598-1-1-4-wide-stepped-hub-drive-gear","title":"QU40598 1-1\/4\" Wide Stepped Hub Drive Gear","description":"\u003cp\u003e\u003cstrong\u003eQU40598 1-1\/4\" Wide Stepped Gear\u003c\/strong\u003e for Dana 30, Dana 44, and GM 10 Bolt Front Axles. QU40598 was the original design. Outside spline that engages wheel hub is 27\/32\" wide. These gears are stepped on the outboard side to aid in removal and to space the gear back from the hub cap. QU40598 gears were usually used with \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate. The back edge of the snap ring groove is approximately 5\/16\" from the end. Obsolete part, available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5540598-qu40598u-used-1-1-4-wide-stepped-hub-gear\" target=\"_blank\"\u003eQU40598U\u003c\/a\u003e Used 1-1\/4\" Wide Stepped Gear available while supplies last\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e Used 7\/8\" Wide Single Width Gear available while supplies last\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Used 7\/8\" Wide Stepped Gear available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSplined Hub Gears\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eProduct Note\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eHistory\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSplined Hub Gears\u003c\/strong\u003e\u003cbr\u003eQU40598\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Front Hub Gears for Dana 30, Dana 44, and GM 10 Bolt Front Axles were used on 4x4s without lockout hubs from 1959 to 1993. These one piece, solid steel splined hub gears provide the strongest connection between your axle shaft and wheel hub. At least five different gears of were used on various vehicles over the years. QU40598\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e are the most common variants.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eQU40598 stepped hub drive gears were mounted outboard of \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate and \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring. The spring pushes the gear against the axle shaft snap ring providing outward tension on the axle shaft, which keeps the axle shaft engaged against the spindle thrust washer. On open knuckle axles, the spring tension also keeps the axle shaft fully seated with the spindle seal(s). The inner edge of the axle shaft snap ring is about 5\/16\" from the end.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHistory\u003c\/strong\u003e\u003cbr\u003eUp until the early 1970s, splined hub gears were the \"stock\" equipment on most lighter 4x4s. If you wanted lockouts, you paid extra. With the advent of full time transfer cases in 1973, splined hub gears were used instead of lockouts on trucks with internally spined wheel hubs. When the full time transfer case fad died out after 1979, splined hub gears were pretty much dropped as factory equipment until Jeep (1982-1984) and Dodge (1985-1993) introduced Dana 44 front axles with vacuum controlled central axle disconnect. Today, splined hub gears are rare and out of production, but still in high demand for competition and severe off road use as they are by far, the strongest choice available for connecting the axle shaft to the wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Plate\u003c\/strong\u003e\u003cbr\u003eThe large, inboard end of \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring rests against \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate. If the plate is damaged, replace it at the same time you replace the spring. \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for Splined Hub Gears:\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427\u003c\/a\u003e Chrome Hub Cap\u003cbr\u003e\u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/40389-qu40389-1980-1993-dodge-dana-44-outer-axle-shaft\" target=\"_blank\"\u003eQU40389\u003c\/a\u003e Outer Axle Shaft for 1980-1993 Dodge Dana 44 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications for QU40598\/QU40428\/QU40657 Splined Hub Gears:\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(part will fit these models but may not have been original equipment for all years):\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3300 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979\u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657408421965,"sku":"40598","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40598_1_1200_clean__87611_16428__74932.1707880683.1280.1280.jpg?v=1742524984"},{"product_id":"40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring","title":"QU40614 Inverted Lug Outer Axle Shaft Snap Ring","description":"\u003cp\u003e\u003cstrong\u003eQU40614 Inverted Lug Outer Axle Shaft Snap Ring\u003c\/strong\u003e is a genuine original equipment Dana part for 1970's to mid 1990's Chevy, Dodge, Ford, GMC, International, and Jeep 4x4s with 19 Spline Outer Axle Shafts. One of these snap rings is used on each outer axle shaft. QU40614 snap rings were used on many later model Dana 44 and GM 10 Bolt Front axles. QU40614 Inverted Lug Axle Shaft Snap Ring is interchangeable with \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e External Lug Snap Rings for most applications (See Tech Note 2).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003ePurpose\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eInterchangeable with QU40032\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePurpose\u003c\/strong\u003e\u003cbr\u003eThis Snap Ring keeps the outer axle shaft engaged with the seal(s) or bushing face in the back of of your spindle. In full time and Central Axle Disconnect (CAD) applications, it keeps the splined hub drive gear from blowing out of the wheel hub. This little guy has a big job, so always replace any bent or twisted Snap Ring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInterchangeable with QU40032\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e and QU40614 Axle Shaft Snap Rings are functionally interchangeable for most applications. \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e External Lug Snap Ring has higher profile lugs (the \"ears\" with the holes in them) compared to QU40614 which has inverted lugs. Some lockout hub designs such as \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn plastic dial units have minimal clearance around the snap ring groove and require QU40614 Snap Ring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40614 Axle Shaft Snap Ring:\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eChevy, Dodge, Ford, GMC, International, and Jeep 4x4's with 19 Spline Outer Axle Shafts from the 1970's to mid 1990's\u003cbr\u003eUsed on many later model Dana 44 and GM 10 Bolt Front Axles\u003cbr\u003e\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657410060365,"sku":"40614","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40614_2__59200_9365__71997.1707881044.1280.1280.jpg?v=1742525281"},{"product_id":"40699-qu40699-large-hub-plate-to-wheel-hub-snap-ring","title":"QU40699 Large Hub Plate to Wheel Hub Snap Ring","description":"\u003cp\u003e\u003cstrong\u003eQU40699 Large Hub Plate to Wheel Hub Snap Ring\u003c\/strong\u003e for Dana Internal Mount plastic dial hubs.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNo Longer Available.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003eSee \u003ca href=\"\/products\/20441-qu20441-front-wheel-hub-to-axle-shaft-support-bearing-snap-ring\"\u003eQU20441\u003c\/a\u003e for a stout solution to those older snap rings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eChevy Blazer, K10, K15, and GMC Jimmy, 1\/2 tons with Dana 44 front axles with internally splined wheel hubs: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eChevy K20 and GMC K25 3\/4 ton Dana 44 front axles with internally splined wheel hubs: 1977.5, 1978, 1979, 1980\u003cbr\u003eChevy Blazer, K10, K15 and GMC Jimmy, K20, K25 GM 10 Bolt front axles with internally splined wheel hubs: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco Dana 30 front axles with internally splined wheel hubs: 1968, 1969, 1970, 1971\u003cbr\u003eStandard duty F-250 Dana 44 front axles with internally splined wheel hubs: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF-100, F-150 Dana 44 front axles with internally splined wheel hubs: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eFord Bronco Dana 44 front axles with internally splined wheel hubs: 1978, 1979\u003cbr\u003eFord F-250 Dana 44 front axles with internally splined wheel hubs: 1977.5, 1978, 1979\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657443287117,"sku":"40699","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40699clean__21681_9435__20620.1707882820.1280.1280.jpg?v=1742526831"},{"product_id":"56018-qu56018-warn-9790-standard-lockout-hub-set","title":"QU56018 WARN 9790 Standard Lockout Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU56018 WARN 9790 Standard Lockout Hub Set\u003c\/strong\u003e is a reliable, original equipment quality 4x4 Free-Wheel Hub Set with rugged, time proven plastic dials for internally splined front wheel hubs on 1957-1994 Ford, 1969-1993 Dodge, 1969-1991 Chevy, 1969-1991 GMC, 1964-1973 IHC, and 1974-1991 Jeep 4x4 vehicles. Warn 9790 Lockout Hub Set was used on many original equipment axles from 1980-1992. Perfect for replacement or upgrade, 9790 Hub Set fits most Dana 30, Dana 44, Dana 44HD, Dana 44IFS, and GM 10 bolt Front Drive Axles equipped with splined front wheel hubs. QU56018 Warn 9790 Hub Set includes 2 M248 Hubs with Hardware.\u003c\/p\u003e \u003cp\u003eWARN 9790 Standard Hubs are the ideal choice for OEM hub replacement. These are the same basic hubs Warn Industries has supplied to OEMs around the world. WARN standard hubs share many features with our premium hubs such as a 4140 steel clutch ring and inner drive gear and a precision cast hub body. Warn 9790 hubs are covered by a lifetime limited warranty.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5556018-qu56018u-used-warn-internal-spline-mount-manual-hub-set\" target=\"_blank\"\u003eQU56018U\u003c\/a\u003e Used Hub Set available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHub Service Kit\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eBefore Installation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpindle Nuts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Spring Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Service Kit\u003c\/strong\u003e\u003cbr\u003eFor QU56018 Hub Service Kit, See: \u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eLightly coat the axle shaft and wheel hub splines with grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Nuts\u003c\/strong\u003e\u003cbr\u003eFord models originally equipped with automatic hubs and a single spindle nut will require replacing the original spindle nuts with two \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Sets.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Spring Plate\u003c\/strong\u003e\u003cbr\u003eIf you are replacing a Spicer factory hub set or Spicer\/GM full time drive gear, you DO NOT reuse the original \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003cbr\u003eSome original axle shafts had an axle shaft snap ring located back by the spindle. Typically, these snap rings retained either a one-piece or three-piece thrust washer against the spindle. On most of these later model applications, the inner thrust washer(s) and snap ring are NOT used with this hub!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU56018 Hub Set:\u003cbr\u003e\u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e Hub Service Kit\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Set\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eBlazer, Jimmy, 1\/2 ton Pickup and Suburban: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e3\/4 ton Pickup and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eRamcharger, Trailduster, W100, W200 (with Dana 44 Axle): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150 (except 1987-1989 with flange mount hub-locks): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF250 with standard Dana 44 closed knuckle axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eBronco (except 1987-1989 with flange mount hub-locks): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF-250 with Dana 44 or Dana 44IFS Front Axles: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton with internally splined wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eFull Size Wagoneer, Cherokee, Grand Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10 Pickup: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20 Pickup: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":41657643401293,"sku":"56018","price":178.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU56018_Hub_clean__07485_18854__68200.1707889507.1280.1280.jpg?v=1742532621"},{"product_id":"56019-qu56019-1-side-warn-internal-spline-mount-manual-hub-set","title":"QU56019 1 Side Warn Internal Spline Mount Manual Hub Set","description":"\u003cp\u003eTHIS PART HAS BEEN SUPERSEDED BY \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e (does both sides).\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQU56019 1 Side Warn Original Equipment Type Internal Spline Mount Manual Hub Set\u003c\/strong\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657649430605,"sku":"56019","price":85.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/4302553067024381695-49963__20528_3588__94823.1707889517.1280.1280.jpg?v=1742532631"},{"product_id":"40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs","title":"QU40558R Recon 10 Tooth Axle Shaft Gear for 2nd Design Spicer Plastic Dial Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40558R Reconditioned 10 Tooth Axle Shaft Gear for Spicer Plastic Dial Hubs\u003c\/strong\u003e these are good used reconditioned gears with a Black Oxide coating for corrosion protection. This is the later design, coarse tooth gear with 19 internal splines used by Ford in 1978-1979 and by GM for 1979-1980 (and perhaps a year or two later). Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40558-qu40558-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558\u003c\/a\u003e New 10 Tooth Axle Shaft Gear (Limited Supply)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installation\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpicer Factory Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eCoat the gear with a thin film of quality grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Factory Hubs\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, QU40558R, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axle: 1979, 1980\u003cbr\u003e10 Bolt Solid Beam Front Axle\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eBronco, F-100, F-150, F-250 Standard Duty, Dana 44 Front Axle: 1978, 1979\u003c\/p\u003e","brand":"Reconditioned","offers":[{"title":"Default Title","offer_id":41657715392589,"sku":"40403","price":48.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40558r__43220_9317__71234.1707891006.1280.1280.jpg?v=1742534027"},{"product_id":"40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs","title":"QU40559R Recon 10 Tooth Hub Drive Gear for 2nd Design Spicer Plastic Dial Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40559R Reconditioned 10 Tooth Hub Drive Gear for Spicer Plastic Dial Hubs\u003c\/strong\u003e these are good used reconditioned gears with a Black Oxide coating for corrosion protection. This is the later design, coarse tooth gear with 10 internal gear teeth used by Ford in 1978-1979 and by GM for 1979-1980 (and perhaps a year or two later). Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40559-qu40559-10-tooth-hub-drive-gear-for-2nd-design-spicer-platsic-dial-hubs\" target=\"_blank\"\u003eQU40559\u003c\/a\u003e New 10 Tooth Hub Drive Gear (Limited Supply)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installation\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpicer Factory Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eCoat the gear with a thin film of quality grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Factory Hubs\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, QU40559R, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axle: 1979, 1980\u003cbr\u003e10 Bolt Solid Beam Front Axle\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eBronco, F-100, F-150, F-250 Standard Duty, Dana 44 Front Axle: 1978, 1979\u003c\/p\u003e","brand":"Reconditioned","offers":[{"title":"Default Title","offer_id":41657716801613,"sku":"40404","price":52.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40559r_1_1200_clean__04673_16562__41030.1707891067.1280.1280.jpg?v=1742534070"},{"product_id":"40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles","title":"QU40427 New Front Hub Cap for Dana 44 and GM 10 Bolt Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40427 GM 10 Bolt and Dana 44 Full Time Front End Hub Cap \u003c\/strong\u003eis a genuine Dana replacement part for 1959-1993 Chevy, Dodge, Ford, GMC, and Jeep 4x4 SUVs and trucks with Dana 44 or GM 10 bolt front axles. These steel Caps are the redesigned cap that was introduced in the 1980's and it is the final production Dana replacement part for QU40427 early model cap that was made from a little heavier gauge of steel. Cap is no longer chrome!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eNo Lockouts\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eInstallation and Sealing\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eDesign Change \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNo Lockouts \u003c\/strong\u003e\u003cbr\u003eQU40427 Dana 44 Hub Cap fits the open end of internally splined Dana 44 front wheel hubs that do NOT have locking hubs including 1973-1979 Chevy, Ford, GMC, and Jeep models with full time Dana 44 or GM 10 bolt front axles. Also fits mid 1980s to 1990s Dodge and Jeep 4x4s with vacuum controlled Central Axle Disconnect (CAD) Dana 44 front axles.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation and Sealing\u003c\/strong\u003e\u003cbr\u003eQU40427 is an interference fit part so it needs to be tapped into position with a soft-faced hammer. To provide maximum sealing, I apply a thin bead of RTV sealant around the outside part of the cap that will fit against the wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDesign Change\u003c\/strong\u003e\u003cbr\u003eQU40427 is a NEW medium gauge cap, it is functionally interchangeable with heavy gauge production caps used in 1960s and 1970s era 4x4s.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40427 Hub Cap:\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e and \u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Rings for manual hubs.\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003cbr\u003e\u003ca href=\"\/products\/90005-qu90005-small-0-5-ounce-tube-ultra-black-rtv-sealant\" target=\"_blank\"\u003eQU90005\u003c\/a\u003e RTV Sealant\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC\u003c\/strong\u003e: \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco (Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3330 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979 \u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657742491725,"sku":"40427","price":27.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40427_114008_1600__89356.1728658099.1280.1280.png?v=1742534805"},{"product_id":"40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs","title":"QU40560R Recon 18T Axle Shaft Gear for 1st Design Spicer Plastic Dial Internal Mount Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40560R Reconditioned 18 Tooth Axle Shaft Gear for Spicer Plastic Dial Internal Mount Hubs Only\u003c\/strong\u003e is the 1st design, square tooth axle shaft driven gear with 18 square cut teeth 19 internal splines used in Ford and GM Dana 44 and GM 10 bolt front axles until 1981. Available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installation\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpicer Factory Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eCoat the gear with a thin film of quality grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Factory Hubs\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, QU40560R, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eInternal Mounted Hubs With Spicer Plastic Hub Dials: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eInternal Mounted Hubs With Spicer Plastic Hub Dials: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e","brand":"Reconditioned","offers":[{"title":"Default Title","offer_id":41657878675533,"sku":"40560","price":70.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40560u__51588_9319__46824.1707896434.1280.1280.jpg?v=1742540641"},{"product_id":"40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs","title":"QU40561R Recon 18T Hub Drive Gear for 1st Design Spicer Plastic Dial Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40561R Reconditioned 18 Tooth Hub Drive Gear with Pressed in Bushing for Spicer Plastic Dial Hubs\u003c\/strong\u003e is a used Spicer 1st design, square tooth gear with 19 internal splines used by Ford and GM up to 1977-1978. Available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installation\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpicer Factory Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eCoat the gear with a thin film of quality grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Factory Hubs\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, QU40561R (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eWith Spicer Plastic Dial Hubs up to 1977-1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eWith Spicer Plastic Dial Hubs up to 1977-1978\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41657879330893,"sku":"5540561","price":52.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40561u__89698_9320__49896.1707896462.1280.1280.jpg?v=1742540681"},{"product_id":"40565-qu40565u-used-chrome-hub-cap-for-spicer-plastic-dial-hubs","title":"QU40565U Used Chrome Hub Cap for Spicer Plastic Dial Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40565U Used Chrome Hub Cap for Spicer Plastic Dial Hubs\u003c\/strong\u003e is a good used part for factory Spicer lockout hubs used on Dana 44 and GM 10 Bolt front axles until 1981. There will be some signs of use on these caps such as external dings, but they are perfectly functional.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eFactory Hub Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eFactory Hub Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFactory Hub Parts\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/5540154-qu40154u-used-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\"\u003eQU40154U\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\"\u003eQU40374U\u003c\/a\u003e Blue Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\"\u003eQU40050\u003c\/a\u003e Spring, \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\"\u003eQU40035\u003c\/a\u003e Spring Plate, and \u003ca href=\"\/products\/40045-qu40045-o-ring-spicer-lockout-hub-cap-to-wheel-hub-d30-d44-gm-10b\"\u003eQU40045\u003c\/a\u003e Hub Body O-Ring.\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41657888014413,"sku":"5540565","price":41.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40565u__51150_9322__84789.1707896573.1280.1280.jpg?v=1742540858"},{"product_id":"40566-qu40566r-reconditioned-hub-plate-for-spicer-plastic-dial-hubs","title":"QU40566R Reconditioned Hub Plate for Spicer Plastic Dial Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40566R Reconditioned Hub Plate for Spicer Plastic Dial Hubs\u003c\/strong\u003e is a good used Cam Plate with a Black Oxide coating for corrosion protection. Fits factory Spicer lockout hubs used on Dana 44 and GM 10 Bolt front axles with internally splined wheel hubs until 1981. Available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHub Parts\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Parts\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, QU40559R, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, QU40561R (Hub Gears), QU40374U Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eBlazer, Jimmy, K10, K15, K1500, K20, K25, K2500: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco, F100, F150: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF-250 with 3000 or 3300 Pound Capacity Dana 44 Front Axle: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e","brand":"Reconditioned","offers":[{"title":"Default Title","offer_id":41657889030221,"sku":"5540566","price":15.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40566r__21906_9324__48469.1707896635.1280.1280.jpg?v=1742540922"},{"product_id":"51181-qu51181-warn-20990-premium-hub-set-for-dana-30-dana-44-gm-10-bolt","title":"QU51181 Warn 20990 Premium Hub Set for Dana 30, Dana 44, GM 10 Bolt","description":"\u003cp\u003e\u003cstrong\u003eQU51181 Warn 20990 Premium Hub Set\u003c\/strong\u003e for Dana 44, GM 10 Bolt, and Ford Bronco Dana 30 Front Axles with internally splined front wheel hubs. Reliable and good looking. QU51181 Fits Chevy and GMC Dana 44 front axles 1970-1991, GM 10 Bolt Front Axles 1977-1991, Dodge 1\/2 ton Dana 44 1969-1974, Dodge Dana 44 1980-1993, Ford Dana 30 1966-1972, most Ford Dana 44 1959-1996, International 1\/2 tons 1968-1975, and Jeep J-Series Full Size 1974-1991.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMatching Parts\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eFor QU51181 Hub Service Kit, See: \u003ca href=\"\/products\/4954-qk4954-hub-service-kit-for-qu51181-warn-premium-manual-hub-set\" target=\"_blank\"\u003eQK4954\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e \u003cbr\u003eChevy and GMC 1\/2 tons with Dana 44 front axles with internally splined wheel hubs: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eGM 10 Bolt Front Axles: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003e1\/2 ton Dana 44 Closed Knuckle with 8 Bolt Ball Seal: 1969, 1970, 1971\u003cbr\u003e1\/2 ton Dana 44 Open Knuckle: 1972, 1973, 1974\u003cbr\u003e1\/2 ton Dana 44 Open Knuckle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC\/Jeep:\u003c\/strong\u003e \u003cbr\u003eInternational 1\/2 tons: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003emost Jeep J-Series with Dana 44: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eBronco Dana 30: 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003emost Dana 44 front axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003emost Dana 44IFS front axles: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":41658703446093,"sku":"51181","price":239.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu51181_1200_clean__50058_15984__51063.1707905018.1280.1280.jpg?v=1742563803"},{"product_id":"56106-qu56106-hub-service-kit-for-qu56109-milemarker-spline-mount-hub-set","title":"QU56106 Hub Service Kit for QU56109 MileMarker Spline Mount Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU56106 Hub Service Kit\u003c\/strong\u003e for MileMarker \u003ca href=\"\/products\/56109-qu56109-mile-marker-1-2-ton-light-3-4-ton-spline-stainless-steel-hub-set\" target=\"_blank\"\u003eQU56109 \u003c\/a\u003e1\/2 Ton \u0026amp; Light 3\/4 Ton Spline Stainless Steel Hub Set. This kit includes 12 screws, 2 axle shaft snap rings, 2 hub snap rings \u0026amp; 2 axle shaft o-rings.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\u003cstrong\u003e with Dana 44 Front Axle\u003c\/strong\u003e:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBlazer:\u003c\/strong\u003e 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e\u003cstrong\u003eSuburban:\u003c\/strong\u003e 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e\u003cstrong\u003eJimmy:\u003c\/strong\u003e 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e\u003cstrong\u003eK10 1\/2 Ton:\u003c\/strong\u003e 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003e\u003cstrong\u003eLight Duty 3\/4 Ton:\u003c\/strong\u003e 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003cstrong\u003e with Dana 44 Front Axle\u003c\/strong\u003e:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eRam Charger:\u003c\/strong\u003e 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cstrong\u003eTrail Duster:\u003c\/strong\u003e 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cstrong\u003eW100 1\/2 Ton:\u003c\/strong\u003e 1969, 1970, 1971, 1972, 1973, 1974 and 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003cstrong\u003e with Dana 44 Front Axle\u003c\/strong\u003e:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBronco:\u003c\/strong\u003e 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987 and 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003e\u003cstrong\u003eF150 1\/2 Ton:\u003c\/strong\u003e 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987 and 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003e\u003cstrong\u003eF250 3\/4 Ton Light Duty with spline wheel hub set:\u003c\/strong\u003e 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987 and 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational\u003cstrong\u003e with Dana 44 Front Axle\u003c\/strong\u003e:\u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003e1\/2 Ton Pickup:\u003c\/strong\u003e 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003cbr\u003e\u003cstrong\u003eTravel-All:\u003c\/strong\u003e 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeeps with Dana 44 Front Axle:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eJ10:\u003c\/strong\u003e 1974, 1975, 1976, 1977, 1978,1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003e\u003cstrong\u003eJ20:\u003c\/strong\u003e 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003e\u003cstrong\u003eWagoneer:\u003c\/strong\u003e 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983\u003cbr\u003e\u003cstrong\u003eGrand Wagoneer:\u003c\/strong\u003e 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e\u003cstrong\u003eCherokee, Cherokee Chief:\u003c\/strong\u003e 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983\u003c\/p\u003e ","brand":"Mile Marker","offers":[{"title":"Default Title","offer_id":41658714980429,"sku":"56106","price":51.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu56106clean__93633_10036__70301.1707906000.1280.1280.jpg?v=1742565000"},{"product_id":"56109-qu56109-mile-marker-1-2-ton-light-3-4-ton-spline-stainless-steel-hub-set","title":"QU56109 Mile Marker® 1\/2 Ton Light 3\/4 Ton Spline Stainless Steel Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU56109 Mile Marker® 1\/2 Ton Light 3\/4 Ton Spline Stainless Steel Hub Set\u003c\/strong\u003e for Dana 44 1974-1980 J10, 1978-1990 J20, 1974-1987 Wagoneer, Cherokee and Gladiator, 1969-1991 Blazer, Suburban, and Jimmy, 1969-1987 1\/2 ton K10, 1978-1987 3\/4 ton Chevy, 1980-1993 Ram Charger and Trail Duster, 1969-1974, 1980-1993 1\/2 ton W100, 1966-1987, 1990-1996 Bronco, 1959-1987, 1990-1996 Ford 1\/2 ton, 3\/4 ton Ford pickup with spline wheel hub set, 1967-1976 1\/2 ton International Pickup and Travel-All.\u003c\/p\u003e \u003cp\u003eSee \u003ca href=\"\/products\/56152-qu56152-mile-marker-dana-44-plastic-dial-hub-set\" target=\"_blank\"\u003eQU56152 \u003c\/a\u003efor Plastic Dial Hub Set\u003c\/p\u003e","brand":"Mile Marker","offers":[{"title":"Default Title","offer_id":41658720583757,"sku":"56109","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu56109assembledclean__78139_10033__53808.1707906123.1280.1280.jpg?v=1742565111"},{"product_id":"5540657-qu40657u-used-7-8-wide-hub-gear-with-step","title":"QU40657U Used 7\/8\" Wide Hub Gear with Step","description":"\u003cp\u003e\u003cstrong\u003eQU40657U Used 7\/8\" Wide Stepped Gear\u003c\/strong\u003e for Dana 30, Dana 44, and GM 10 Bolt Front Axles. QU40657 was the most common type splined hub gear from the the late 1970's to the late 1980s. Outside spline that engages wheel hub is a little under 5\/8\" wide. These gears are stepped on the outboard side to aid in removal and to space the gear back from the hub cap. QU40657 gears were usually used with \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate in the 1970s or \u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer in the 1980s and 1990s. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e New 1-1\/4\" Wide Stepped Gear available while supplies last\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e Used 7\/8\" Wide Single Width Gear available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSplined Hub Gears\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eProduct Note\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eHistory\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSplined Hub Gears\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/QU40657U Splined Front Hub Gears for Dana 30, Dana 44, and GM 10 Bolt Front Axles were used on 4x4s without lockout hubs from 1959 to 1993. These one piece, solid steel splined hub gears provide the strongest connection between your axle shaft and wheel hub. At least five different gears of were used on various vehicles over the years. \u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/QU40657U are the most common variants.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eQU40657 7\/8\" Wide Single Stepped Gear was used with with three different configurations. Many later production axles with axle shafts having a back edge of a snap ring groove located about 5\/8\" from the end use QU40657 Gear paired with \u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer. When used with \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate, the back face of the axle shaft snap ring was usually about 5\/16\" from the end, however some applications use an inset snap ring (back edge about 5\/8\" from the end) which spaces the gear farther back in the hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHistory\u003c\/strong\u003e\u003cbr\u003eUp until the early 1970s, splined hub gears were the \"stock\" equipment on most lighter 4x4s. If you wanted lockouts, you paid extra. With the advent of full time transfer cases in 1973, splined hub gears were used instead of lockouts on trucks with internally spined wheel hubs. When the full time transfer case fad died out after 1979, splined hub gears were pretty much dropped as factory equipment until Jeep (1982-1984) and Dodge (1985-1993) introduced Dana 44 front axles with vacuum controlled central axle disconnect. Today, splined hub gears are rare and out of production, but still in high demand for competition and severe off road use as they are by far, the strongest choice available for connecting the axle shaft to the wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Plate\u003c\/strong\u003e\u003cbr\u003eThe large, inboard end of \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring rests against \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate. If the plate is damaged, replace it at the same time you replace the spring. \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for Splined Hub Gears:\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427\u003c\/a\u003e Chrome Hub Cap\u003cbr\u003e\u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/40389-qu40389-1980-1993-dodge-dana-44-outer-axle-shaft\" target=\"_blank\"\u003eQU40389\u003c\/a\u003e Outer Axle Shaft for 1980-1993 Dodge Dana 44 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications for QU40598\/QU40428\/QU40657 Splined Hub Gears:\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(part will fit these models but may not have been original equipment for all years):\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3300 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979\u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660053684301,"sku":"5540657","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40657uclean__76139_9406__44296.1707922476.1280.1280.jpg?v=1742659746"},{"product_id":"5540694-qu40694u-used-red-plastic-hub-dial-for-1st-design-spicer-plastic-dial-hubs","title":"QU40694U Used Red Plastic Hub Dial for 1st Design Spicer Plastic Dial Hubs","description":"\u003cp\u003e\u003cstrong\u003eThis part has been superseded to \u003ca href=\"\/products\/3340374-tk40374-blue-aluminum-hub-dial-for-1st-design-spicer-hubs\"\u003eTK40374\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQU40694U Weathered but Usable Used Red Plastic Hub Dial\u003c\/strong\u003e for 1968-1978.5 Ford Dana 44 front axles with Spicer factory lockout hubs.\u003c\/p\u003e\n\u003cp\u003eNote: for 1978.5-1979 with 10 tooth gears, use \u003ca href=\"\/products\/20930-qu20930-red-plastic-hub-dial-for-2nd-design-spicer-1978-5-1979-ford-dana-44\" target=\"_blank\"\u003eQU20930\u003c\/a\u003e\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660069511245,"sku":"5540694","price":29.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40694u_1_1200_clean__22988_16411__43729.1707922774.1280.1280.jpg?v=1742660020"},{"product_id":"5551181-qu51181u-used-warn-20990-premium-hub-set","title":"QU51181U USED Warn 20990 Premium Hub Set","description":"\u003cp\u003eThis part has superseded to \u003ca href=\"\/products\/51181-qu51181-warn-20990-premium-hub-set-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU51181\u003c\/a\u003e NEW\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQU51181U USED Warn 20990 Premium Hub Set\u003c\/strong\u003e for Dana 44, GM 10 Bolt, and Ford Bronco Dana 30 Front Axles with internally splined front wheel hubs. Fits Chevy and GMC Dana 44 front axles 1970-1991, GM 10 Bolt Front Axles 1977-1991, Dodge 1\/2 ton Dana 44 1969-1974, Dodge Dana 44 1980-1993, Ford Dana 30 1966-1972, most Ford Dana 44 1959-1996, International 1\/2 tons 1968-1975, and Jeep J-Series Full Size 1974-1991.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMatching Parts\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eFor QU51181U Hub Service Kit, See: \u003ca href=\"\/products\/4954-qk4954-hub-service-kit-for-qu51181-warn-premium-manual-hub-set\" target=\"_blank\"\u003eQK4954\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e \u003cbr\u003eChevy and GMC 1\/2 tons with Dana 44 front axles with internally splined wheel hubs: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eGM 10 Bolt Front Axles: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003e1\/2 ton Dana 44 Closed Knuckle with 8 Bolt Ball Seal: 1969, 1970, 1971\u003cbr\u003e1\/2 ton Dana 44 Open Knuckle: 1972, 1973, 1974\u003cbr\u003e1\/2 ton Dana 44 Open Knuckle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC\/Jeep:\u003c\/strong\u003e \u003cbr\u003eInternational 1\/2 tons: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003emost Jeep J-Series with Dana 44: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eBronco Dana 30: 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003emost Dana 44 front axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003emost Dana 44IFS front axles: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660154118221,"sku":"5551181","price":99.98,"currency_code":"USD","in_stock":false}]},{"product_id":"5556018-qu56018u-used-warn-internal-spline-mount-manual-hub-set","title":"QU56018U Used Warn Internal Spline Mount Manual Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU56018U Used Warn Original Equipment Type Internal Spline Mount Manual Hub Set\u003c\/strong\u003e for internally splined front wheel hubs on 1957-1994 Ford, 1969-1993 Dodge, 1969-1991 Chevy, 1969-1991 GMC, 1964-1973 IHC, and 1974-1991 Jeep 4x4 vehicles. Warn 9790 Lockout Hub Set was used on many original equipment axles from 1980-1992. Perfect for replacement or upgrade, 9790 Hub Set fits most Dana 30, Dana 44, Dana 44HD, Dana 44IFS, and GM 10 bolt Front Drive Axles equipped with splined front wheel hubs. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e New Hub Set\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHub Service Kit\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eBefore Installation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpindle Nuts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Spring Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Service Kit\u003c\/strong\u003e\u003cbr\u003eFor QU56018 Hub Service Kit, See: \u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eLightly coat the axle shaft and wheel hub splines with grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Nuts\u003c\/strong\u003e\u003cbr\u003eFord models originally equipped with automatic hubs and a single spindle nut will require replacing the original spindle nuts with two \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Sets.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Spring Plate\u003c\/strong\u003e\u003cbr\u003eIf you are replacing a Spicer factory hub set or Spicer\/GM full time drive gear, you DO NOT reuse the original \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003cbr\u003eSome original axle shafts had an axle shaft snap ring located back by the spindle. Typically, these snap rings retained either a one-piece or three-piece thrust washer against the spindle. On most of these later model applications, the inner thrust washer(s) and snap ring are NOT used with this hub!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU56018U Hub Set:\u003cbr\u003e\u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e Hub Service Kit\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Set\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eBlazer, Jimmy, 1\/2 ton Pickup and Suburban: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e3\/4 ton Pickup and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eRamcharger, Trailduster, W100, W200 (with Dana 44 Axle): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150 (except 1987-1989 with flange mount hub-locks): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF250 with standard Dana 44 closed knuckle axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eBronco (except 1987-1989 with flange mount hub-locks): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF-250 with Dana 44 or Dana 44IFS Front Axles: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton with internally splined wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eFull Size Wagoneer, Cherokee, Grand Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10 Pickup: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20 Pickup: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660159033421,"sku":"5556018","price":55.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu56018u_1200_clean__12879_11002__77547.1707924192.1280.1280.jpg?v=1742664580"},{"product_id":"5556109-qu56109u-used-mile-marker-1-2-ton-light-3-4-ton-spline-stainless-steel-hub-set","title":"QU56109U Used Mile Marker® 1\/2 Ton Light 3\/4 Ton Spline Stainless Steel Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU56109U Used Mile Marker® 1\/2 Ton Light 3\/4 Ton Spline Stainless Steel Hub Set\u003c\/strong\u003e for Dana 44 1974-1980 J10, 1978-1990 J20, 1974-1987 Wagoneer, Cherokee and Gladiator, 1969-1991 Blazer, Suburban, and Jimmy, 1969-1987 1\/2 ton K10, 1978-1987 3\/4 ton Chevy, 1980-1993 Ram Charger and Trail Duster, 1969-1974, 1980-1993 1\/2 ton W100, 1966-1987, 1990-1996 Bronco, 1959-1987, 1990-1996 Ford 1\/2 ton, 3\/4 ton Ford pickup with spline wheel hub set, 1967-1976 1\/2 ton International Pickup and Travel-All. Available while supplies last.\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660169420877,"sku":"5556109","price":49.98,"currency_code":"USD","in_stock":false}]},{"product_id":"9940566-qu40566-hub-plate-for-spicer-plastic-dial-hubs","title":"QU40566 Hub Plate for Spicer Plastic Dial Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40566 Hub Plate for Spicer Plastic Dial Hubs\u003c\/strong\u003e fits factory Spicer lockout hubs used on Dana 44 and GM 10 Bolt front axles with internally splined wheel hubs until 1981.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHub Parts\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Parts\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558\u003c\/a\u003eR, QU40559R, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, QU40561R (Hub Gears), QU40374U Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032 \u003c\/a\u003eAxle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050 \u003c\/a\u003eSpring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035 \u003c\/a\u003eSpring Plate.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eBlazer, Jimmy, K10, K15, K1500, K20, K25, K2500: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco, F100, F150, Dana 44 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF-250 with 3000 or 3300 Pound Capacity Dana 44 Front Axle: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e","brand":"Spicer","offers":[{"title":"Default Title","offer_id":41660287647821,"sku":"9940566","price":21.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40566clean__05665_9323__15612.1707926595.1280.1280.jpg?v=1742672947"},{"product_id":"55560185-qu56018-5u-used-warn-manual-hub-for-one-side","title":"QU56018.5U Used Warn Manual Hub for One Side","description":"\u003cp\u003e\u003cstrong\u003eQU56018.5U Used Warn Original Equipment Type Internal Spline Mount Manual Hub for One Side\u003c\/strong\u003e for internally splined front wheel hubs on 1957-1994 Ford, 1969-1993 Dodge, 1969-1991 Chevy, 1969-1991 GMC, 1964-1973 IHC, and 1974-1991 Jeep 4x4 vehicles. Warn 9790 Lockout Hub Set was used on many original equipment axles from 1980-1992. Perfect for replacement or upgrade, 9790 Hub Set fits most Dana 30, Dana 44, Dana 44HD, Dana 44IFS, and GM 10 bolt Front Drive Axles equipped with splined front wheel hubs. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e New Hub Set\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHub Service Kit\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eBefore Installation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpindle Nuts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Spring Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Service Kit\u003c\/strong\u003e\u003cbr\u003eFor QU56018 Hub Service Kit, See: \u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eLightly coat the axle shaft and wheel hub splines with grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Nuts\u003c\/strong\u003e\u003cbr\u003eFord models originally equipped with automatic hubs and a single spindle nut will require replacing the original spindle nuts with two \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Sets.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Spring Plate\u003c\/strong\u003e\u003cbr\u003eIf you are replacing a Spicer factory hub set or Spicer\/GM full time drive gear, you DO NOT reuse the original \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003cbr\u003eSome original axle shafts had an axle shaft snap ring located back by the spindle. Typically, these snap rings retained either a one-piece or three-piece thrust washer against the spindle. On most of these later model applications, the inner thrust washer(s) and snap ring are NOT used with this hub!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU56018.5U Hub Set:\u003cbr\u003e\u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e Hub Service Kit\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Set\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eBlazer, Jimmy, 1\/2 ton Pickup and Suburban: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e3\/4 ton Pickup and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eRamcharger, Trailduster, W100, W200 (with Dana 44 Axle): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150 (except 1987-1989 with flange mount hub-locks): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF250 with standard Dana 44 closed knuckle axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eBronco (except 1987-1989 with flange mount hub-locks): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF-250 with Dana 44 or Dana 44IFS Front Axles: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton with internally splined wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eFull Size Wagoneer, Cherokee, Grand Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10 Pickup: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20 Pickup: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660313043021,"sku":"55560185","price":49.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu56018clean__68029_10192__67329.1707927015.1280.1280.jpg?v=1742674616"},{"product_id":"5520348-qu20348u-used-splined-front-disc-brake-wheel-hub","title":"QU20348U USED Splined Front Disc Brake Wheel Hub","description":"\u003cp\u003e\u003cstrong\u003eQU20348U USED 1976-1992 F150, Bronco Splined Front Disc Brake Wheel Hub \u003c\/strong\u003e is a used internally splined front wheel hub that fits all 1976-1986, most 1987-1988 and all 1989-1992 Ford F100, F150 and full size Bronco 4x4s. Available while supplies last. Studs sold separately.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003e1987-1988\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#safety\"\u003eNever Reuse Wheel Bolts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eAfter Assembly\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1987-1988\u003c\/strong\u003e\u003cbr\u003eFor the 1987 and 1988 model year vehicles built to March 1988 (on some models to May 1988), Ford Broncos and F150 4x4s with factory manual hubs have a unique, one piece \"pancake\" hub\/rotor with two large diameter, close set wheel bearings. The lockout hub is a flange mount type that fits over the wheel studs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"safety\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eSafety Notes:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNever Reuse Wheel Bolts\u003c\/strong\u003e\u003cbr\u003eFor safety reasons, never reuse wheel bolts (studs).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAfter Assembly\u003c\/strong\u003e\u003cbr\u003eIt is relatively unusual for a big 4x4 brake rotor to have less than the maximum allowable runout and rotor thickness variation once it is assembled to a wheel hub. This is due to manufacturing tolerances of the parts and the pressures exerted on the hub and rotor when pressing in the wheel studs. After assembling your brake rotor to the new hub, the rotor should be checked for thickness variation (0.001\" {0.025 mm} maximum) and runout (0.005\" {0.127 mm} maximum with 0.003\" or less preferred). A rotor that is out of tolerance should be machined with an on-the-vehicle brake lathe if possible or on an accurate bench type brake lathe.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching parts and tools for QU20348U Hub are:\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" target=\"_blank\"\u003eQU90001 \u003c\/a\u003eWheel Seal \u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken® Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50578-qu50578-timken-tapered-wheel-or-diff-bearing\" target=\"_blank\"\u003eQU50578 \u003c\/a\u003eTimken® Inner Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Round Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770 \u003c\/a\u003e3 Piece Round, 4 Slot Spindle Nut Kit with Tanged Lockwasher\u003cbr\u003e\u003ca href=\"\/products\/40106-qu40106-ratchet-type-spindle-nut-for-1985-1992-ford-dana-44ifs\" target=\"_blank\"\u003eQU40106 \u003c\/a\u003eRatchet Type Spindle Nut (1985-1992)\u003cbr\u003e\u003ca href=\"\/products\/40192-qu40192-front-spindle-kit-for-1976-1979-ford-dana-44\" target=\"_blank\"\u003eQU40192 \u003c\/a\u003eSpindle for 1976-1979\u003cbr\u003e\u003ca href=\"\/products\/40309-qu40309-spindle-for-1980-1992-dana-44ifs\" target=\"_blank\"\u003eQU40309 \u003c\/a\u003eSpindle for 1980-1992 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018 \u003c\/a\u003eWarn Manual Lockout Hub Set \u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U \u003c\/a\u003eSplined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427 \u003c\/a\u003eChrome Hub Cap for use with Splined Hub Gear\u003cbr\u003e\u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i \u003c\/a\u003e4 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003eProtection Plus Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/1504-qt1504-dana-30-dana-44-and-gm-10-bolt-front-wheel-seal-installer\" target=\"_blank\"\u003eQT1504 \u003c\/a\u003eWheel Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003eBronco, F100, F150: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eBronco, F150 with Axle Tag Numbers 610268 or 610310: 1988\u003cbr\u003eBronco and F150: 1989, 1990, 1991, 1992\u003cbr\u003e\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660348956749,"sku":"5520348","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20348uclean_2__67473_8492__47832.1707930253.1280.1280.jpg?v=1742678376"},{"product_id":"5540035-qu40035u-used-hub-spring-plate","title":"QU40035U USED Hub Spring Plate","description":"\u003cp\u003e\u003cstrong\u003eQU40035U USED Hub Spring Plate\u003c\/strong\u003e fits between the \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e hub spring and the outer wheel bearing cup on SUV's, and pickups with Dana Spicer Model 30, Model 44 or GM 10 Bolt front drive axles equipped with internal mount, Spicer factory lock out hubs or full time drive gears. These Spring Plates were used on most of the late 1960's to mid 1980's Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with internal splined front wheel hubs. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e New\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eFactory Hub Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpicer ONLY Spring Plate\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThese 2.89\" diameter, cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring! Properly installed, the large diameter end of QU40035U Spring Plate will fit against the outer bearing cup on the inboard side. The function of this part is to protect the outer wheel bearing from the spring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFactory Hub Parts\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and QU40035U Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer ONLY Spring Plate\u003c\/strong\u003e\u003cbr\u003eQU40035U Spring Plate is NOT used with Warn or any other aftermarket hub-lock. QU40035U is only used with Spicer factory plastic dial hubs or with full time splined hub drive gears that are held under tension by \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e spring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMatching Parts for QU40035U Hub Plate:\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears \u003cbr\u003e\u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Ring \u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Hub Spring \u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Outer Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e (part will fit these models but may not have been original equipment for all years)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco (Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3330 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979\u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660419833933,"sku":"5540035","price":3.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40035uclean__59949_9019__96530.1707934067.1280.1280.jpg?v=1742682963"},{"product_id":"5540050-qu40050u-used-spicer-hub-spring-dana-30-dana-44-gm-10-bolt-axles","title":"QU40050U Used Spicer Hub Spring - Dana 30, Dana 44, GM 10 Bolt Axles","description":"\u003cp\u003e\u003cstrong\u003e QU40050U Good USED Spicer Tapered Hub Spring QU40050 Spicer Tapered Hub Spring\u003c\/strong\u003e for SUV's, and pickups with Dana Spicer Model 30, Model 44 or GM 10 Bolt front drive axles equipped with internal mount, Spicer lock out hubs or full time drive gears. These springs were used on most of the late 1960's to mid 1980's Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with internal splined front wheel hubs. \u003cstrong\u003eWhile supplies last.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eAlso available new: \u003cstrong\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spicer Tapered Hub Spring \u003c\/strong\u003eLIMITED SUPPLY.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eTo Install\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpring Length\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpicer Factory Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Install\u003c\/strong\u003e\u003cbr\u003e The large, inboard end of QU40050 Spring rests against \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate. If the plate is damaged, replace it at the same time you replace the spring. \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring Length\u003c\/strong\u003e\u003cbr\u003e The free length of these new springs is about 3-11\/16\" (+\/- 1\/8\"). Most used Springs are shorter as they have weakened over time.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Factory Hubs\u003c\/strong\u003e\u003cbr\u003e Spicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, QU40050 Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e (part will fit these models but may not have been original equipment for all years)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC\u003c\/strong\u003e: \u003cbr\u003e K5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 19067, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003e K20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003e W100: 1969, 1970, 1971, 1972, 1973, 1974 \u003cbr\u003e W150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e F100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003e Bronco (Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003e F150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989 \u003cbr\u003e F150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003e F250 with 3330 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003e F250 (Dana 44): 1978, 1979 \u003cbr\u003e F250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e 1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e Cherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 \u003cbr\u003e J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 \u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660420915277,"sku":"5540050","price":9.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/2889286321296209663-49963__97927_6059__32111.1707934128.1280.1280.jpg?v=1742683049"},{"product_id":"5540427-qu40427u-used-gm-10-bolt-and-dana-44-full-time-front-end-hub-cap","title":"QU40427U USED GM 10 Bolt and Dana 44 Full Time Front End Hub Cap","description":"\u003cp\u003e\u003cstrong\u003eQU40427U USED GM 10 Bolt and Dana 44 Full Time Front End Hub Cap\u003c\/strong\u003e for 1959-1993 Chevy, Dodge, Ford, GMC, and Jeep 4x4 SUVs and trucks with Dana 44 or GM 10 bolt front axles. These chromed steel Caps are the redesigned cap that was introduced in the 1980's and it is the final production Dana replacement part for \u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427 \u003c\/a\u003eearly model cap that was made from a little heavier gauge of steel.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eNo Lockouts\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eInstallation and Sealing\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eDesign Change \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNo Lockouts \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427 \u003c\/a\u003eDana 44 Hub Cap fits the open end of internally splined Dana 44 front wheel hubs that do NOT have locking hubs including 1973-1979 Chevy, Ford, GMC, and Jeep models with full time Dana 44 or GM 10 bolt front axles. Also fits mid 1980s to 1990s Dodge and Jeep 4x4s with vacuum controlled Central Axle Disconnect (CAD) Dana 44 front axles.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation and Sealing\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427 \u003c\/a\u003eis an interference fit part so it needs to be tapped into position with a soft-faced hammer. To provide maximum sealing, I apply a thin bead of RTV sealant around the outside part of the cap that will fit against the wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDesign Change\u003c\/strong\u003e\u003cbr\u003eQU40427U is a USED, heavy gauge cap that is in good, useable condition but not perfect. It is functionally interchangeable with heavy gauge production caps used in 1960s and 1970s era 4x4s.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40427U Chrome Hub Cap:\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e and \u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Rings for manual hubs.\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003cbr\u003e\u003ca href=\"\/products\/90005-qu90005-small-0-5-ounce-tube-ultra-black-rtv-sealant\" target=\"_blank\"\u003eQU90005\u003c\/a\u003e RTV Sealant\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC\u003c\/strong\u003e: \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco (Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3330 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979 \u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660448276557,"sku":"5540427","price":6.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40427ufaceclean600__45238_8518__68585.1707935190.1280.1280.jpg?v=1742684396"},{"product_id":"5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear","title":"QU40428U Used 7\/8\" Wide Single Width Hub Drive Gear","description":"\u003cp\u003e\u003cstrong\u003eQU40428U Used 7\/8\" Wide Single Width Gear\u003c\/strong\u003e for Dana 30, Dana 44, and GM 10 Bolt Front Axles. QU40428 has full length ID and OD splines. These gears have 2 to 10 holes in them to reduce the weight and provide a way to remove them with a hook. QU40428 gears were generally used with \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate in the 1970s or \u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer in the 1980s and 1990s. To use this gear, your axle shaft has to have the back edge of a snap ring groove located about 5\/8\" from the end. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e New 1-1\/4\" Wide Stepped Gear available while supplies last\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Used 7\/8\" Wide Stepped Gear available while supplies last \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSplined Hub Gears\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eProduct Note\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eHistory\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSplined Hub Gears\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/QU40428U\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Front Hub Gears for Dana 30, Dana 44, and GM 10 Bolt Front Axles were used on 4x4s without lockout hubs from 1959 to 1993. These one piece, solid steel splined hub gears provide the strongest connection between your axle shaft and wheel hub. At least five different gears of were used on various vehicles over the years. \u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/QU40428U\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e are the most common variants.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eQU40428 7\/8\" Wide Single Width Gear can only be used with an axle shaft that has the back edge of a snap ring groove located about 5\/8\" from the end. The inboard groove location is required so the OD gear splines will clear the hub cap. QU40428 is most commonly found in applications that also use \u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer, but was also used with on late 1970s axles with \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHistory\u003c\/strong\u003e\u003cbr\u003eUp until the early 1970s, splined hub gears were the \"stock\" equipment on most lighter 4x4s. If you wanted lockouts, you paid extra. With the advent of full time transfer cases in 1973, splined hub gears were used instead of lockouts on trucks with internally spined wheel hubs. When the full time transfer case fad died out after 1979, splined hub gears were pretty much dropped as factory equipment until Jeep (1982-1984) and Dodge (1985-1993) introduced Dana 44 front axles with vacuum controlled central axle disconnect. Today, splined hub gears are rare and out of production, but still in high demand for competition and severe off road use as they are by far, the strongest choice available for connecting the axle shaft to the wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Plate\u003c\/strong\u003e\u003cbr\u003eThe large, inboard end of \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring rests against \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate. If the plate is damaged, replace it at the same time you replace the spring. \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for Splined Hub Gears:\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427\u003c\/a\u003e Chrome Hub Cap\u003cbr\u003e\u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/40389-qu40389-1980-1993-dodge-dana-44-outer-axle-shaft\" target=\"_blank\"\u003eQU40389\u003c\/a\u003e Outer Axle Shaft for 1980-1993 Dodge Dana 44 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications for QU40598\/QU40428\/QU40657 Splined Hub Gears:\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(part will fit these models but may not have been original equipment for all years):\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3300 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979\u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660448440397,"sku":"5540428","price":59.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40428u_1200_clean__13118_11606__57937.1707935231.1280.1280.jpg?v=1742684431"},{"product_id":"5540598-qu40598u-used-1-1-4-wide-stepped-hub-gear","title":"QU40598U Used 1-1\/4\" Wide Stepped Hub Gear","description":"\u003cp\u003e\u003cstrong\u003eQU40598U Used 1-1\/4\" Wide Stepped Gear\u003c\/strong\u003e for Dana 30, Dana 44, and GM 10 Bolt Front Axles. QU40598 was the original design. Outside spline that engages wheel hub is 27\/32\" wide. These gears are stepped on the outboard side to aid in removal and to space the gear back from the hub cap. QU40598 gears were usually used with \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate. The back edge of the snap ring groove is approximately 5\/16\" from the end. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e New 1-1\/4\" Wide Stepped Gear available while supplies last\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e Used 7\/8\" Wide Single Width Gear available while supplies last\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Used 7\/8\" Wide Stepped Gear available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSplined Hub Gears\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eProduct Note\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eHistory\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSplined Hub Gears\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Front Hub Gears for Dana 30, Dana 44, and GM 10 Bolt Front Axles were used on 4x4s without lockout hubs from 1959 to 1993. These one piece, solid steel splined hub gears provide the strongest connection between your axle shaft and wheel hub. At least five different gears of were used on various vehicles over the years. \u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e are the most common variants.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eQU40598 stepped hub drive gears were mounted outboard of \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate and \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring. The spring pushes the gear against the axle shaft snap ring providing outward tension on the axle shaft, which keeps the axle shaft engaged against the spindle thrust washer. On open knuckle axles, the spring tension also keeps the axle shaft fully seated with the spindle seal(s). The inner edge of the axle shaft snap ring is about 5\/16\" from the end.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHistory\u003c\/strong\u003e\u003cbr\u003eUp until the early 1970s, splined hub gears were the \"stock\" equipment on most lighter 4x4s. If you wanted lockouts, you paid extra. With the advent of full time transfer cases in 1973, splined hub gears were used instead of lockouts on trucks with internally spined wheel hubs. When the full time transfer case fad died out after 1979, splined hub gears were pretty much dropped as factory equipment until Jeep (1982-1984) and Dodge (1985-1993) introduced Dana 44 front axles with vacuum controlled central axle disconnect. Today, splined hub gears are rare and out of production, but still in high demand for competition and severe off road use as they are by far, the strongest choice available for connecting the axle shaft to the wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Plate\u003c\/strong\u003e\u003cbr\u003eThe large, inboard end of \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring rests against \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate. If the plate is damaged, replace it at the same time you replace the spring. \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for Splined Hub Gears:\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427\u003c\/a\u003e Chrome Hub Cap\u003cbr\u003e\u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/40389-qu40389-1980-1993-dodge-dana-44-outer-axle-shaft\" target=\"_blank\"\u003eQU40389\u003c\/a\u003e Outer Axle Shaft for 1980-1993 Dodge Dana 44 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications for QU40598\/QU40428\/QU40657 Splined Hub Gears:\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(part will fit these models but may not have been original equipment for all years):\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3300 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979\u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660452962381,"sku":"5540598","price":70.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40598u__53012_9349__73455.1707935892.1280.1280.jpg?v=1742685153"},{"product_id":"40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs","title":"QU40154 Hub Cam Body for Spicer Plastic Dial Internal Mount Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40154 Hub Cam Body for Spicer Plastic Dial Internal Mount Hubs\u003c\/strong\u003e is a new old stock (NOS) genuine Spicer replacement part for original equipment Spicer Lockout Hubs used on 4x4 Chevy, Dodge, Ford, and GMC SUVs and trucks with Dana 30 or Dana 44 front axles with internally splined wheel hubs. Spicer supplied these hubs to the vehicle manufacturers from the late 1960s to the early 1980s. USA Made. \u003cem\u003eLimited Supply.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5540154-qu40154u-used-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154U\u003c\/a\u003e Used Hub Cam Body available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eCommon Issues\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eHub Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCommon Issues\u003c\/strong\u003e\u003cbr\u003eThe most common issues with these hub cams is wear and cracking where the ears attach to the round ring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Parts\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: QU40154 Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eReplacement part for OEM Spicer Lockout Hubs on 4x4 Chevy, Dodge, Ford, and GMC SUV's and Trucks with Dana 30 or Dana 44 Front Axles with Internally Splined Wheel Hubs\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F150, Bronco, Dana 44 1978-1979\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41660461088845,"sku":"40154","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40154__16444_9104__99828.1707936594.1280.1280.jpg?v=1742685935"},{"product_id":"5540154-qu40154u-used-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs","title":"QU40154U Used Hub Cam Body for Spicer Plastic Dial Internal Mount Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40154U Used Hub Cam Body for Spicer Plastic Dial Internal Mount Hubs \u003c\/strong\u003eis used on 4x4 Chevy, Dodge, Ford, and GMC SUVs and trucks with Dana 30 or Dana 44 front axles with internally splined wheel hubs. Spicer supplied these hubs to the vehicle manufacturers from the late 1960s to the early 1980s. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e New Hub Cam Body (Limited Supply)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eCommon Issues\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eHub Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCommon Issues\u003c\/strong\u003e\u003cbr\u003eThe most common issues with these hub cams is wear and cracking where the ears attach to the round ring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Parts\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: QU40154 Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eReplacement part for OEM Spicer Lockout Hubs on 4x4 Chevy, Dodge, Ford, and GMC SUV's and Trucks with Dana 30 or Dana 44 Front Axles with Internally Splined Wheel Hubs\u003cbr\u003e\u003cstrong\u003eFord: \u003c\/strong\u003eF150, Bronco, Dana 44 1978-1979\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660542877773,"sku":"5540154","price":15.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40154u_1_1200_clean__43725_14125__56275.1707939688.1280.1280.jpg?v=1742690999"},{"product_id":"824-qu56018-5-1-side-manual-hub-set","title":"QU56018.5 1 Side Manual Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU56018.5 1 Side WARN Original Equipment Type Internal Spline Mount Manual Hub\u003c\/strong\u003e is a reliable, original equipment quality 4x4 Free-Wheel Hub with rugged, time proven plastic dial for internally splined front wheel hubs on 1957-1994 Ford, 1969-1993 Dodge, 1969-1991 Chevy, 1969-1991 GMC, 1964-1973 IHC, and 1974-1991 Jeep 4x4 vehicles. Warn 9790 Lockout Hub was used on many original equipment axles from 1980-1992. Perfect for replacement or upgrade, 9790 Hub fits most Dana 30, Dana 44, Dana 44HD, Dana 44IFS, and GM 10 bolt Front Drive Axles equipped with splined front wheel hubs.\u003c\/p\u003e \u003cp\u003eWARN 9790 Standard Hubs are the ideal choice for OEM hub replacement. These are the same basic hubs Warn Industries has supplied to OEMs around the world. WARN standard hubs share many features with our premium hubs such as a 4140 steel clutch ring and inner drive gear and a precision cast hub body. Warn 9790 hubs are covered by a lifetime limited warranty.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Both Sides Hub Set\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHub Service Kit\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eBefore Installation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpindle Nuts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Spring Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Service Kit\u003c\/strong\u003e\u003cbr\u003eFor QU56018 Hub Service Kit, See: \u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eLightly coat the axle shaft and wheel hub splines with grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Nuts\u003c\/strong\u003e\u003cbr\u003eFord models originally equipped with automatic hubs and a single spindle nut will require replacing the original spindle nuts with two \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Sets.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Spring Plate\u003c\/strong\u003e\u003cbr\u003eIf you are replacing a Spicer factory hub set or Spicer\/GM full time drive gear, you DO NOT reuse the original \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003cbr\u003eSome original axle shafts had an axle shaft snap ring located back by the spindle. Typically, these snap rings retained either a one-piece or three-piece thrust washer against the spindle. On most of these later model applications, the inner thrust washer(s) and snap ring are NOT used with this hub!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU56018.5 Hub Set:\u003cbr\u003e\u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e Hub Service Kit\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Set\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eBlazer, Jimmy, 1\/2 ton Pickup and Suburban: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e3\/4 ton Pickup and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eRamcharger, Trailduster, W100, W200 (with Dana 44 Axle): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150 (except 1987-1989 with flange mount hub-locks): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF250 with standard Dana 44 closed knuckle axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eBronco (except 1987-1989 with flange mount hub-locks): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF-250 with Dana 44 or Dana 44IFS Front Axles: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton with internally splined wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eFull Size Wagoneer, Cherokee, Grand Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10 Pickup: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20 Pickup: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":41660589572173,"sku":"824","price":99.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu56018.5_1200_clean__33412_12095__43298.1707942162.1280.1280.jpg?v=1742694057"},{"product_id":"55511815-qu51181-5u-used-1-side-warn-20990-premium-manual-hub","title":"QU51181.5U Used 1 Side Warn 20990 Premium Manual Hub","description":"\u003cp\u003e\u003cstrong\u003eQU51181.5U Used 1 Side Warn 20990 Premium Internal Spline Mount Brass Dial Manual Hub\u003c\/strong\u003e for Dana 44, GM 10 Bolt, and Ford Bronco Dana 30 Front Axles with internally splined front wheel hubs. Fits Chevy and GMC Dana 44 front axles 1970-1991, GM 10 Bolt Front Axles 1977-1991, Dodge 1\/2 ton Dana 44 1969-1974, Dodge Dana 44 1980-1993, Ford Dana 30 1966-1972, most Ford Dana 44 1959-1996, International 1\/2 tons 1968-1975, and Jeep J-Series Full Size 1974-1991. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See \u003ca href=\"\/products\/51181-qu51181-warn-20990-premium-hub-set-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU51181\u003c\/a\u003e New Hub Set\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMatching Parts\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eFor QU51181 Hub Service Kit, See: \u003ca href=\"\/products\/4954-qk4954-hub-service-kit-for-qu51181-warn-premium-manual-hub-set\" target=\"_blank\"\u003eQK4954\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e \u003cbr\u003eChevy and GMC 1\/2 tons with Dana 44 front axles with internally splined wheel hubs: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eGM 10 Bolt Front Axles: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003e1\/2 ton Dana 44 Closed Knuckle with 8 Bolt Ball Seal: 1969, 1970, 1971\u003cbr\u003e1\/2 ton Dana 44 Open Knuckle: 1972, 1973, 1974\u003cbr\u003e1\/2 ton Dana 44 Open Knuckle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC\/Jeep:\u003c\/strong\u003e \u003cbr\u003eInternational 1\/2 tons: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003emost Jeep J-Series with Dana 44: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eBronco Dana 30: 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003emost Dana 44 front axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003emost Dana 44IFS front axles: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660590325837,"sku":"55511815","price":69.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu51181.5u_1200_clean__66031_10967__81749.1707942174.1280.1280.jpg?v=1742694074"},{"product_id":"5552271-qu52271u-used-dana-44-warn-hub-spring","title":"QU52271U Used Dana 44 Warn Hub Spring","description":"\u003cp\u003e\u003cstrong\u003eQU52271U Used Dana 44 Hub Gear Spring\u003c\/strong\u003e for 9790 Standard Lockout Hub Set used in 1957-1994 Ford, 1969-1993 Dodge, 1969-1991 Chevy, 1969-1991 GMC, 1964-1973 IHC, and 1974-1991 Jeep 4x4 vehicles. Warn 9790 Lockout Hub Set was used on many original equipment axles from 1980-1992. 9790 Hub Set fits most Dana 30, Dana 44, Dana 44HD, Dana 44IFS, and GM 10 bolt Front Drive Axles equipped with splined front wheel hubs. Available while supplies last.\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660735291469,"sku":"5552271","price":19.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu52271u_1_1200_clean__07508_14352__64800.1707948550.1280.1280.jpg?v=1742703073"},{"product_id":"40558-qu40558-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs","title":"QU40558 10 Tooth Axle Shaft Gear for 2nd Design Spicer Plastic Dial Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40558 New Old Stock 10 Tooth Axle Shaft Gear\u003c\/strong\u003e for Spicer Plastic Dial Hubs This is the later design, coarse tooth gear with 19 internal splines used by Ford in 1978-1979 and by GM for 1979-1980 (and perhaps a year or two later). \u003cem\u003eLimited Supply.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e Reconditioned 10 Tooth Axle Shaft Gear available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installation\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpicer Factory Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eCoat the gear with a thin film of quality grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Factory Hubs\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axle: 1979, 1980\u003cbr\u003e10 Bolt Solid Beam Front Axle\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eBronco, F-100, F-150, F-250 Standard Duty, Dana 44 Front Axle: 1978, 1979\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41660775891021,"sku":"40558","price":139.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40558_1_1200_clean__76936_14155__07338.1707952251.1280.1280.jpg?v=1742708107"},{"product_id":"40559-qu40559-10-tooth-hub-drive-gear-for-2nd-design-spicer-platsic-dial-hubs","title":"QU40559 10 Tooth Hub Drive Gear for 2nd Design Spicer Platsic Dial Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40559 New Old Stock 10 Tooth Hub Drive Gear\u003c\/strong\u003e for Spicer Plastic Dial Hubs. This is the later design, coarse tooth gear with 10 internal gear teeth used by Ford in 1978-1979 and by GM for 1979-1980 (and perhaps a year or two later). \u003cem\u003eLimited Supply.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e Reconditioned 10 Tooth Hub Drive Gear available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installation\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpicer Factory Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eCoat the gear with a thin film of quality grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Factory Hubs\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e Hub Gear, 10 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e Hub Gear, 18 Tooth\u003cbr\u003e\u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axle: 1979, 1980\u003cbr\u003e10 Bolt Solid Beam Front Axle\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eBronco, F-100, F-150, F-250 Standard Duty, Dana 44 Front Axle: 1978, 1979\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41660775923789,"sku":"40559","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40559_1_1200_clean__98020_14338__59077.1707952274.1280.1280.jpg?v=1742708131"},{"product_id":"20930-qu20930-red-plastic-hub-dial-for-2nd-design-spicer-1978-5-1979-ford-dana-44","title":"QU20930 Red Plastic Hub Dial for 2nd Design Spicer 1978.5-1979 Ford Dana 44","description":"\u003cp\u003e\u003cstrong\u003eQU20930 Red Plastic Hub Dial\u003c\/strong\u003e for 2nd design Spicer small internal mount hub locks in 1978.5-1979 Ford Bronco, F150, and F250 with Dana 44 front axles. Limited supply.\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41660775956557,"sku":"20930","price":79.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20930_1_1200_clean__61296_14159__63545.1707952291.1280.1280.jpg?v=1742708149"},{"product_id":"52291-tk52291-dana-44-30-spline-locking-hub-gear-upgrade","title":"TK52291 Dana 44 30 Spline Locking Hub Gear Upgrade","description":"\u003cp\u003e\u003cstrong\u003eTK52291 30 Spline Locking Hub Gear Upgrade\u003c\/strong\u003e for Dana 44 front axles with Premium Warn Locking Hubs. Made from 300M alloy steel to replace the OEM Dana hub gear for extra strength.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41660895494221,"sku":"52291","price":164.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk52291a-4-web-mf__95706_25565__70703.1707955280.1280.1280.jpg?v=1742717958"},{"product_id":"55561095-qu56109-5u-used-1-side-mile-marker-stainless-steel-hub","title":"QU56109.5U Used 1 Side Mile Marker® Stainless Steel Hub","description":"\u003cp\u003e\u003cstrong\u003eQU56109.5U Used 1 Side Mile Marker® 1\/2 Ton Light 3\/4 Ton Spline Stainless Steel Hub\u003c\/strong\u003e for Dana 44 1974-1980 J10, 1978-1990 J20, 1974-1987 Wagoneer, Cherokee and Gladiator, 1969-1991 Blazer, Suburban, and Jimmy, 1969-1987 1\/2 ton K10, 1978-1987 3\/4 ton Chevy, 1980-1993 Ram Charger and Trail Duster, 1969-1974, 1980-1993 1\/2 ton W100, 1966-1987, 1990-1996 Bronco, 1959-1987, 1990-1996 Ford 1\/2 ton, 3\/4 ton Ford pickup with spline wheel hub set, 1967-1976 1\/2 ton International Pickup and Travel-All.\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41660961062989,"sku":"55561095","price":24.98,"currency_code":"USD","in_stock":true}]},{"product_id":"56152-qu56152-mile-marker-dana-44-plastic-dial-hub-set","title":"QU56152 Mile Marker® Dana 44 Plastic Dial Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU56152 Mile Marker® 1\/2 Ton Light 3\/4 Ton Spline Plastic Dial Hub Set\u003c\/strong\u003e for Dana 44 1974-1980 J10, 1978-1990 J20, 1974-1987 Wagoneer, Cherokee and Gladiator, 1969-1991 Blazer, Suburban, and Jimmy, 1969-1987 1\/2 ton K10, 1978-1987 3\/4 ton Chevy, 1980-1993 Ram Charger and Trail Duster, 1969-1974, 1980-1993 1\/2 ton W100, 1966-1987, 1990-1996 Bronco, 1959-1987, 1990-1996 Ford 1\/2 ton, 3\/4 ton Ford pickup with spline wheel hub set, 1967-1976 1\/2 ton International Pickup and Travel-All.\u003c\/p\u003e \u003cp\u003eSee \u003ca href=\"\/products\/56109-qu56109-mile-marker-1-2-ton-light-3-4-ton-spline-stainless-steel-hub-set\" target=\"_blank\"\u003eQU56109\u003c\/a\u003e for Stainless Steel Dial Hub Set\u003c\/p\u003e","brand":"Mile Marker","offers":[{"title":"Default Title","offer_id":41660987310157,"sku":"56152","price":179.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu56152_1_1200_clean__93244_16671__32970.1707959003.1280.1280.jpg?v=1742723702"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/hubs__81433_f26b6bbb-1a75-4327-a29c-6a4032417026.jpg?v=1773182481","url":"https:\/\/torqueking.com\/collections\/hubs-1976-1979-f-series-bronco-dana-44f.oembed?page=3","provider":"Torque King 4x4","version":"1.0","type":"link"}