{"title":"Closed Knuckle Parts 67-75 F250 Dana 44HD","description":"\u003cp\u003eShop now for Closed Knuckle Parts to fit 1967-1975 Ford F-250 12 Bolt Dana 44HD Front Axles. Great selection. In stock. Quick shipping.\u003c\/p\u003e\n\u003cp\u003eWe stock the regular service closed knuckle parts for your 1967-1975 Regular Cab Ford F-250 4x4 with a closed knuckle Dana 44 Heavy Duty front axle which will have 12 bolt Knuckle Ball Hemisphere Seals. With a Closed Knuckle axle, the axle universal joints and king pin bearings are lubricated by very heavy oil or a viscous grease that will flow when the axle shafts rotate. A large multi-piece seal is bolted to the backside of the steering knuckle to keep lubricant in and water out. On poorly maintained closed knuckle axles or axles equipped with lockout hubs that are rarely used in 4x4, the upper king pin bearing and axle universal joint can suffer from lack of lubrication. The Ball Seals will usually weep some lubricant especially when standard gear oils are used as a lubricant. Submersion of the axle under water or condensation from temperature changes can cause moisture to build up inside the enclosed ball and lead to corrosion damage and part failures.\u003c\/p\u003e","products":[{"product_id":"4765-qa4765-11-piece-king-pin-shim-kit-dana-44hd-dana-60-dana-70-axles","title":"QA4765 11 Piece King Pin Shim Kit - Dana 44HD, Dana 60, Dana 70 Axles","description":"\u003cp\u003e\u003cstrong\u003e QA4765 Dana 44HD, Dana 60, Dana 70 Closed Knuckle Shim Kit\u003c\/strong\u003e for 3\/4 ton to 1-1\/2 ton 4x4 trucks with Dana 44HD, Dana 60, or Dana 70 closed knuckle front axles with 12 Bolt Ball Seals. Kit includes 11 shims total, actual mix may vary, but typically, this Kit has (2) .003\", (4) .005\", (4) .010\", and (1) .030\" shims. Thicknesses are approximate. USA Made. Order 2 Kits per axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUsing Shims\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eBefore Installing\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUsing Shims\u003c\/strong\u003e\u003cbr\u003e Shims are used between the King Pin Caps and Steering Knuckles to set your Knuckle Bearing\/Bushing turning preload. More shims decreases preload, less shims increases preload.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003e King Pin Caps are shimmed to put the specified turning preload on the bearings. The amount of turning preload varies by vehicle and year, but the value is measured by a beam or dial type torque wrench (refer to the vehicle manufacturer Service Manual for your specific model specification). Too loose can cause poor steering or \"Death Wobble\", too tight will lead to rapid bearing failure, broken parts, and possible steering loss.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevrolet\/GMC:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003e K20\/K25: 1963, 1964, 1965, 1966, 1967, 1968, 1969 \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003e W200: 1969, 1970 \u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e W300: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e W600: 1974, 1975, 1976, 1977, 1978 \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003eF-250 with Heavy-Duty Model 44 Front Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e F-250 Crew Cab: 1974, 1975 \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e200, 1200 with Heavy-Duty Model 44 Front Axle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e300, 1300: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e1600: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1984, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep:\u003cbr\u003e Closed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e M715, M725, M726 Military 1-1\/4 ton: 1967, 1968, 1969\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656275042381,"sku":"4765","price":54.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4765_2__83438_7387__52612.1707826919.1280.1280.jpg?v=1778716695"},{"product_id":"4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles","title":"QA4936 12 Bolt Knuckle Ball Seal Kit for Dana 44HD, 60, 70 Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQA4936 Replacement 12 Bolt Knuckle Ball Seal Kit for Dana Spicer Front Axles\u003c\/strong\u003e is for the heavy-duty Dana closed knuckle front axles in 1958-1979 3\/4 ton through 1-1\/2 ton 4x4s with Dana Spicer Model 44HD, Model 60, or Model 70 front drive axles with the large diameter knuckle ball. Kit includes split metal backed ball seal, felt wiper seal, upgraded stainless steel metal backing plates and 12 new serrated, flange head cap screws. Sold individually. \u003cstrong\u003eTwo kits required to service both sides\u003c\/strong\u003e of your front axle assembly. USA Made replacement parts.\u003c\/p\u003e \u003cp\u003e\u003cem\u003eNOTE: QA4936 replaces QU40189 100% Dana Ball Seal Kit which is out of production and no longer available. So far, we have been able to provide this kit for the now, at least, 40 year old vehicles.... \u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info?\u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003eUse\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eInitial Lubrication\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eLubricant\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eInstalling Seal Ring\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eInstalling Felt Wiper\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40421-qu40421-knuckle-seal-for-12-bolt-steering-knuckles\"\u003eQU40421\u003c\/a\u003e Knuckle Seal\u003cbr\u003e\u003ca href=\"\/products\/40425-qu40425-outer-felt-wiper-seal-for-12-bolt-steering-knuckles\"\u003eQU40425\u003c\/a\u003e Felt Wiper Seal\u003cbr\u003e(2) \u003ca href=\"\/products\/40426-tk40426-seal-retainer-half-for-12-bolt-closed-knuckle-front-axles\"\u003eTK40426\u003c\/a\u003e Seal Retainer Half\u003cbr\u003e(12) \u003ca href=\"\/products\/40695-qu40695-knuckle-seal-bolt\"\u003eQU40695\u003c\/a\u003e Knuckle Seal Bolt\u003cbr\u003e\u003ca href=\"\/products\/994936-qa4936-qu40188-instructions\"\u003eQA4936 Instructions\u003c\/a\u003e (optional)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse\u003c\/strong\u003e\u003cbr\u003eDana Spicer axles were built with 2 sizes of closed steering knuckles. All Model 25. Model 27, and Model 30 closed knuckle axles use \u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e 8 Bolt Knuckle Seal as did standard duty Model 44 axles. Heavy-duty Model 44 axles have the bigger Knuckle Ball and use QU40189 or QA4936 12 Bolt Seal. All Dana Spicer Model 60 and Model 70 closed knuckle axles use QU40189 or QA4936.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInitial Lubrication\u003c\/strong\u003e\u003cbr\u003eBefore installing your new QU40189 or QA4936 Knuckle Seal, apply a thin coat of grease to the knuckle ball to provide initial lubrication for the Seal. I also like to put a little SAE 250 weight gear lube around the inner circumference of the felt wiper so after it soaks in it will reduce friction between the felt and ball.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubricant\u003c\/strong\u003e\u003cbr\u003eThe lubricant used in steering knuckles must be fairly thick, but still be able to flow a little bit. Straight gear lube will seep past the seal! We recommend our \u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eClosed Knuckle Lube\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstalling Seal Ring\u003c\/strong\u003e\u003cbr\u003eThe metal\/rubber seal ring is split so you can twist it open to clear the axle tube during installation. When you install the seal on the knuckle, place the split joint at the 12:00 o'clock position.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstalling Felt Wiper\u003c\/strong\u003e\u003cbr\u003eThe felt wiper needs to be cut before installation. Locate the cut at what will be the the 12:00 o'clock position when installed.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/4765-qa4765-11-piece-king-pin-shim-kit-dana-44hd-dana-60-dana-70-axles\" rel=\"noopener\" target=\"_blank\"\u003eQA4765\u003c\/a\u003e King Pin Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/4618-qk4618-dana-44hd-dana-60-dana-70-large-closed-knuckle-bearing-kit\" rel=\"noopener\" target=\"_blank\"\u003eQK4618\u003c\/a\u003e\/\u003ca href=\"\/products\/50785-tk50785-large-king-pin-timken-bearing-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK50785\u003c\/a\u003e Knuckle Bearing Kits for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/4616-qk4616-dana-44-60-70-large-closed-knuckle-bearing-and-bushing-kit\" rel=\"noopener\" target=\"_blank\"\u003eQK4616\u003c\/a\u003e Knuckle Bearing and Bushing Kit for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" rel=\"noopener\" target=\"_blank\"\u003eQU50601\u003c\/a\u003e King Pin Bearing Cup for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50600\u003c\/a\u003e King Pin Bearing for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e Keyed Upper King Pin Bushing for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" rel=\"noopener\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e 6 Bolt Inner Metal Hub Gasket for 3\/4 ton trucks with Dana Plastic Dial Factory Lockouts\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e 6 Bolt Hub Gasket for Chevy, Dodge, Ford and GM with External Mount Lockouts\u003cbr\u003e\u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eClosed Knuckle Lube\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" rel=\"noopener\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" rel=\"noopener\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" rel=\"noopener\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" rel=\"noopener\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevrolet\/GM:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003eK20\/K25: 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003eW200: 1963, 1964, 1665, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003eW300: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eW600: 1974, 1975, 1976, 1977, 1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003eF-250 with Heavy-Duty Model 44 Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003eF-250 Crew Cab: 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e200, 1200, 1210 with Heavy-Duty Model 44 Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e300, 1300, 1310, 200: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e1600: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep \u003cbr\u003eClosed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003eM715, M725, M726 Military 1-1\/4 ton: 1967, 1968, 1969\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41656303353933,"sku":"4936","price":189.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QA4936_095824_clean__41462.1715194750.1280.1280.png?v=1742481433"},{"product_id":"4618-qk4618-dana-44hd-dana-60-dana-70-large-closed-knuckle-bearing-kit","title":"QK4618 Dana 44HD, Dana 60, Dana 70 Large Closed Knuckle Bearing Kit","description":"\u003cp\u003e\u003cstrong\u003eQK4618 Dana 44HD, Dana 60, Dana 70 Large Closed Knuckle Front Axle Bearing Kit\u003c\/strong\u003e is a direct replacement for Ford Dana 44HD and Dana 60 Closed Knuckle Front Axles, but it will also work on Chevy, Dodge, GMC, International, and Jeep (See Tech Note 3). QK4618 has the parts you need to replace the Knuckle Bearings on both sides of vintage, heavy-duty 4x4 truck with a Dana 44HD, Dana 60, or Dana 70 closed knuckle axle with 12 bolt knuckle ball seals. Kit includes 4 \u003ca href=\"\/products\/50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles\" target=\"_blank\"\u003eQU50600\u003c\/a\u003e Timken® Knuckle Bearings, 4 \u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" target=\"_blank\"\u003eQU50601\u003c\/a\u003e Timken® Knuckle Bearing Cups, and 2 \u003ca href=\"\/products\/4765-qa4765-11-piece-king-pin-shim-kit-dana-44hd-dana-60-dana-70-axles\" target=\"_blank\"\u003eQA4765\u003c\/a\u003e shim kits. QK4618 kit is for both sides of axle. USA Made.\u003c\/p\u003e \u003cp\u003eAlso available: \u003ca href=\"\/products\/50785-tk50785-large-king-pin-timken-bearing-kit\" target=\"_blank\"\u003eTK50785\u003c\/a\u003e \u003cem\u003eTorque King\u003c\/em\u003e® Bearing Only Kit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eMaintenance\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eShims\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eReplacing Upper Bronze Bushings with Bearings\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eDoes NOT Fit Standard Dana 44 and Smaller Axles\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMaintenance\u003c\/strong\u003e\u003cbr\u003eWith a Closed Knuckle axle, the axle universal joints and king pin bearings are lubricated by very heavy oil or a viscous grease that will flow when the axle shafts rotate. A large multi-piece seal is bolted to the backside of the steering knuckle to keep lubricant in and water out. On poorly maintained closed knuckle axles or axles equipped with lockout hubs that are rarely used in 4x4, the upper king pin bearing and axle universal joint can suffer from lack of lubrication. The Ball Seals will usually weep some lubricant especially when standard gear oils are used as a lubricant. Submersion of the axle under water or condensation from temperature changes can cause moisture to build up inside the enclosed ball and lead to corrosion damage and part failures.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eShims\u003c\/strong\u003e\u003cbr\u003eShims are used between the King Pin Caps and Steering Knuckles to set your Knuckle Bearing\/Bushing turning preload. More shims decreases preload, less shims increases preload. King Pin Caps are shimmed to put the specified turning preload on the bearings. The amount of turning preload varies by vehicle and year but the value is measured by a beam or dial type torque wrench (refer to the vehicle manufacturer Service Manual for your specific model specification). Too loose can cause poor steering or \"Death Wobble\", too tight will lead to rapid bearing failure, broken parts, and possible steering loss.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eReplacing Upper Bronze Bushings with Bearings\u003c\/strong\u003e\u003cbr\u003eChevy, Dodge, Ford, GMC, IHC, and Jeep all used Dana 12 bolt closed knuckle axles. These axles, which except for Ford, originally used \u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e Bronze Upper King Pin Bushing instead of \u003ca href=\"\/products\/50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles\" target=\"_blank\"\u003eQU50600\u003c\/a\u003e Bearing, can use this Kit if the Knuckle turning preload is set at 9-15 Lb. Ft. (12-20 Nm) without \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e Ball Seal or steering rods installed on knuckle. Also See \u003ca href=\"\/products\/4616-qk4616-dana-44-60-70-large-closed-knuckle-bearing-and-bushing-kit\" target=\"_blank\"\u003eQK4616\u003c\/a\u003e for our King Pin Bushing and Bearing Kit which includes two \u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e Bushings.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDoes NOT Fit Standard Dana 44 and Smaller Axles\u003c\/strong\u003e\u003cbr\u003eIf you have a Dana 25, Dana 27, Dana 30, or Dana 44 front axle with 8 bolt ball seals, see \u003ca href=\"\/products\/4617-qk4617-dana-axle-small-knuckle-bearing-and-shim-kit\" target=\"_blank\"\u003eQK4617\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003cbr\u003e\u003c\/strong\u003eK20, K25 3\/4 ton trucks with the optional Dana 44HD closed knuckle front axle and 12 bolt ball seals: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW200 Power Wagon with the optional Dana 44HD closed knuckle front axle and 12 bolt ball seals: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eW300 Power Wagon 4x4s with Dana 70 closed knuckle front axle and 12 bolt ball seals: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003eW600 Power Wagon 4x4s with Dana 70 closed knuckle front axle and 12 bolt ball seals: 1974, 1975, 1976, 1977, 1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 44HD and 12 bolt ball seals\u003c\/strong\u003e:\u003cbr\u003eF-250 with Heavy-Duty Model 44HD Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 60 and 12 bolt ball seals:\u003c\/strong\u003e\u003cbr\u003eF-250 Crew Cab: 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e3\/4 ton 4x4s with the optional Dana 44HD closed knuckle front axle and 12 bolt ball seals: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e4x4s with Dana 70 closed knuckle front axle and 12 bolt ball seals: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eM715, M725, M726 Military 4x4s with Dana 60 closed knuckle front axle and 12 bolt ball seals: 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003eFor Jeep M series trucks there may be a different lower bearing needed. You will need to check your lower bearing size to be certain that this is the bearing kit you need. Please call to check the size against what we have before ordering.\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656724422733,"sku":"4618","price":364.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QK4618-1.png?v=1772642801"},{"product_id":"40695-qu40695-knuckle-seal-bolt","title":"QU40695 Knuckle Seal Bolt","description":"\u003cp\u003e\u003cstrong\u003eQU40695 5\/16\"x1\/2\" Flange Head Bolt\u003c\/strong\u003e for 8 and 12 bolt knuckle ball seals.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657442861133,"sku":"40695","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40695_2clean__79388_9431__89274.1707882737.1280.1280.jpg?v=1742526759"},{"product_id":"40421-qu40421-knuckle-seal-for-12-bolt-steering-knuckles","title":"QU40421 Knuckle Seal for 12 Bolt Steering Knuckles","description":"\u003cp\u003e\u003cstrong\u003eQU40421 Knuckle Seal\u003c\/strong\u003e for 12 bolt steering knuckles on Dana 44HD, Dana 60, and Dana 70 Closed Knuckle front axles.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657740591181,"sku":"40421","price":59.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40421clean__78083_9250__47370.1707891553.1280.1280.jpg?v=1742534597"},{"product_id":"40426-tk40426-seal-retainer-half-for-12-bolt-closed-knuckle-front-axles","title":"TK40426 Seal Retainer Half for 12 Bolt Closed Knuckle Front Axles","description":"\u003cp\u003e\u003cstrong\u003eTK40426 Torque King Replacement 12 Bolt Knuckle Seal Retainer Half\u003c\/strong\u003e is thicker than OE, stainless steel, and a corrosion resistant replacement to the existing seal retainer on the Dana Spicer Model 44HD, Model 60 and Model 70 closed knuckle front axles with the large diameter knuckle ball. Made in USA. Sold individually. Order 2 per side.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e Replacement 12 Bolt Knuckle Ball Seal Kit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eUse\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eLubricant\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse\u003c\/strong\u003e\u003cbr\u003eDana Spicer axles were built with 2 sizes of closed steering knuckles. All Model 25. Model 27, and Model 30 closed knuckle axles use \u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e 8 Bolt Knuckle Seal as did standard duty Model 44 axles. Heavy-duty Model 44 axles have the bigger Knuckle Ball and use QU40189 or \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Seal. All Dana Spicer Model 60 and Model 70 closed knuckle axles use QU40189 or \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubricant\u003c\/strong\u003e\u003cbr\u003eThe lubricant used in steering knuckles must be fairly thick, but still be able to flow a little bit. Straight gear lube will seep past the seal! We recommend our \u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eClosed Knuckle Lube\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/4765-qa4765-11-piece-king-pin-shim-kit-dana-44hd-dana-60-dana-70-axles\" rel=\"noopener\" target=\"_blank\"\u003eQA4765\u003c\/a\u003e King Pin Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/4618-qk4618-dana-44hd-dana-60-dana-70-large-closed-knuckle-bearing-kit\" rel=\"noopener\" target=\"_blank\"\u003eQK4618\u003c\/a\u003e\/\u003ca href=\"\/products\/50785-tk50785-large-king-pin-timken-bearing-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK50785\u003c\/a\u003e Knuckle Bearing Kits for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/4616-qk4616-dana-44-60-70-large-closed-knuckle-bearing-and-bushing-kit\" rel=\"noopener\" target=\"_blank\"\u003eQK4616\u003c\/a\u003e Knuckle Bearing and Bushing Kit for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" rel=\"noopener\" target=\"_blank\"\u003eQU50601\u003c\/a\u003e King Pin Bearing Cup for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50600\u003c\/a\u003e King Pin Bearing for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e Keyed Upper King Pin Bushing for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" rel=\"noopener\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e 6 Bolt Inner Metal Hub Gasket for 3\/4 ton trucks with Dana Plastic Dial Factory Lockouts\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e 6 Bolt Hub Gasket for Chevy, Dodge, Ford and GM with External Mount Lockouts\u003cbr\u003e\u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eClosed Knuckle Lube\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" rel=\"noopener\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" rel=\"noopener\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" rel=\"noopener\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" rel=\"noopener\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevrolet\/GM:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003eK20\/K25: 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003eW200: 1963, 1964, 1665, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003eW300: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eW600: 1974, 1975, 1976, 1977, 1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003eF-250 with Heavy-Duty Model 44 Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003eF-250 Crew Cab: 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e200, 1200, 1210 with Heavy-Duty Model 44 Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e300, 1300, 1310, 200: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e1600: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep \u003cbr\u003eClosed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003eM715, M725, M726 Military 1-1\/4 ton: 1967, 1968, 1969\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657742426189,"sku":"40426","price":69.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40426-cropped-1280__51776.1733794098.1280.1280.jpg?v=1742534765"},{"product_id":"50785-tk50785-large-king-pin-timken-bearing-kit","title":"TK50785 Large King Pin Timken® Bearing Kit","description":"\u003cp\u003e\u003cstrong\u003eTK50785 Torque King® Large Closed Knuckle King Pin \u003cstrong\u003eTimken®\u003c\/strong\u003e Bearing Kit \u003c\/strong\u003efor Dana 44HD, Dana 60, and Dana 70 Closed Knuckle Front Axles (with 12 bolt knuckle seals). Replace the Large Knuckle Bearings on both sides of your Dana 44HD, Dana 60, or Dana 70 closed knuckle axle (12 bolt knuckle seals) with these new Timken® Bearings and Cups. USA made.\u003c\/p\u003e \u003cp\u003eTK50785 Kit includes (4) \u003ca href=\"\/products\/50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles\" target=\"_blank\"\u003eQU50600 \u003c\/a\u003eTimken® Knuckle Bearings and (4) \u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" target=\"_blank\"\u003eQU50601 \u003c\/a\u003eTimken® Knuckle Bearing Cups.\u003c\/p\u003e \u003cp\u003eNote: If you have 8 bolt knuckle seals, use TK50784 Small King Pin Bearing Kit or \u003ca href=\"\/products\/4617-qk4617-dana-axle-small-knuckle-bearing-and-shim-kit\" target=\"_blank\"\u003eQK4617 \u003c\/a\u003eKit with Shims \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #000000\"\u003eAlso some M seris Jeeps use a different lower bearing and this kit will not fit. You will need to check your lower bearing size to be certain that this is the bearing you need. Please call to check the size against what we have before ordering.\u003c\/span\u003e\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41658451853389,"sku":"50785","price":254.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk50785_2__63095_8975__83267.1707901031.1280.1280.jpg?v=1742552125"},{"product_id":"50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles","title":"QU50600 Timken King Pin or Knuckle Bearing for Dana 44HD, 60, 70 Axles","description":"\u003cp\u003e\u003cstrong\u003eQU50600 Timken® Large King Pin or Knuckle Bearing for Dana 44HD, Dana 60, Dana 70, and Dodge Power Wagon Heavy Duty Front Axles\u003c\/strong\u003e This is a First Class, original equipment quality Bearing that meets or exceeds all vehicle manufacturer specifications making it the top choice for 1943 to 1993 heavy-duty front axle steering knuckle applications like yours equipped with Dana Spicer Model 44HD, Model 60, or Model 70 closed knuckle plus Model 60 and Model 61 open knuckle front axles. Country of origin may vary as Timken® produces Bearings in plants located around the globe, however, QU50600 is almost always made in either Canada or the United States.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSubstitute\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eAlways\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eBearing Cup\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eAvailable Kits\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSubstitute\u003c\/strong\u003e\u003cbr\u003e For the upper king pins on closed knuckle axles, Dodge, GM, International, and Jeep Dana Spicer Model 44HD, Model 60 and Model 70 front axles typically had \u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e keyed Bronze Bushings instead of QU50600 Bearing. Ford used QU50600 Bearing. You can substitute QU50600 Bearing for \u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e if desired or when stocks of \u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e are exhausted. All vehicle manufacturers used QU50600 Bearing for the lower king pin in both closed knuckle and open knuckle Model 60, Model 61, and Model 70 front drive axles. QU50600 is also found in Dana 44HD closed knuckle axles.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAlways\u003c\/strong\u003e\u003cbr\u003e Always replace the cup and cone at the same time.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBearing Cup\u003c\/strong\u003e\u003cbr\u003e The matching Bearing Cup is \u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" target=\"_blank\"\u003eQU50601\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAvailable Kits\u003c\/strong\u003e\u003cbr\u003e Also see Kits \u003ca href=\"\/products\/40191-qu40191-dana-60-lower-king-pin-bearing-and-seal-kit\" target=\"_blank\"\u003eQU40191\u003c\/a\u003e, \u003ca href=\"\/products\/4512-qk4512-dana-60-front-king-pin-kit\" target=\"_blank\"\u003eQK4512 \u003c\/a\u003e(open knuckle), \u003ca href=\"\/products\/4616-qk4616-dana-44-60-70-large-closed-knuckle-bearing-and-bushing-kit\" target=\"_blank\"\u003eQK4616\u003c\/a\u003e and \u003ca href=\"\/products\/4618-qk4618-dana-44hd-dana-60-dana-70-large-closed-knuckle-bearing-kit\" target=\"_blank\"\u003eQK4618\u003c\/a\u003e (closed knuckle) and \u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" target=\"_blank\"\u003eQU50601\u003c\/a\u003e Bearing Cup (all applications).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy\/GMC 1 Ton Dana 60 Front Axle\u003c\/a\u003e\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1015-exploded-view-1985-1991-ford-f350-dana-60-front-axle\" target=\"_blank\"\u003eXV1015 1985-1991 Ford F350 Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevrolet\/GMC:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eK20\/K25: 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e(Lower only, upper uses \u003ca href=\"\/products\/40093-qu40093-1975-1993-dana-60-plastic-upper-king-pin-bushing\" target=\"_blank\"\u003eQU40093\u003c\/a\u003e Bushing)\u003cbr\u003eK30, K3500: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eK3500\/V3500 1 Ton (square cab models): 1988, 1989, 1990, 1991\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003ePower Wagon 8-3\/4\" and 9-5\/8\" Front Axles\u003cbr\u003e\u003c\/strong\u003e1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cstrong\u003e\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eW200: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eW300: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW600: 1974, 1975, 1976, 1977, 1978\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 60, 61:\u003c\/strong\u003e\u003cbr\u003e(Lower only, upper uses \u003ca href=\"\/products\/40093-qu40093-1975-1993-dana-60-plastic-upper-king-pin-bushing\" target=\"_blank\"\u003eQU40093\u003c\/a\u003e Bushing)\u003cbr\u003eW-350 1 Ton*: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW-250 all with Cummins Diesel: 1989, 1990, 1991, 1992, 1993\u003cbr\u003e*For some reason, a few mid 1980's W-350 single rear wheel trucks have a wimpy Model 44 axle!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eF-250 with Heavy-Duty Model 44 Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 60:\u003cbr\u003e\u003c\/strong\u003e (uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eF-250 Crew Cab: 1974, 1975\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e(Lower only, upper uses \u003ca href=\"\/products\/40093-qu40093-1975-1993-dana-60-plastic-upper-king-pin-bushing\" target=\"_blank\"\u003eQU40093\u003c\/a\u003e Bushing)\u003cbr\u003eHeavy-Duty F-250, F-350: 1978, 1979\u003cbr\u003eF-350: 1985-1\/2, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eW200, 1200 with Heavy-Duty Model 44 Front Axle: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e(Lower only, upper uses \u003ca href=\"\/products\/40093-qu40093-1975-1993-dana-60-plastic-upper-king-pin-bushing\" target=\"_blank\"\u003eQU40093\u003c\/a\u003e Bushing)\u003cbr\u003e1300 Camper Special: 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003e300, 1300: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e1600: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep \u003cbr\u003e Closed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e (uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eM715, M725, M726 Military 1-1\/4 ton: 1967, 1968, 1969\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":41659024801869,"sku":"50600","price":48.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu50600_1719_1600__80131_21106__32224.1707910156.1280.1280.png?v=1742582784"},{"product_id":"50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70","title":"QU50601 Timken King Pin or Knuckle Bearing Cup for Dana 44HD, 60, 70","description":"\u003cp\u003e\u003cstrong\u003eQU50601 Timken® King Pin or Knuckle Bearing Cup for Dana 44HD, Dana 60, Dana 70, and Dodge Power Wagon Front Axles \u003c\/strong\u003eThis is a First Class, original equipment quality Bearing that meets or exceeds all vehicle manufacturer specifications making it the top choice for 1943 to 1993 heavy-duty front axle steering knuckle applications like yours equipped with Dana Spicer Model 44HD, Model 60, or Model 70 closed knuckle plus Dana 60 and Dana 61 open knuckle front axles. Country of origin may vary as Timken® produces Bearings in plants located around the globe, however, QU50601 is almost always made in either Canada or the United States.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eAlways Replace\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eAvailable Kits\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAlways Replace\u003c\/strong\u003e\u003cbr\u003eAlways replace the cup and cone at the same time.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Matching Parts\u003c\/strong\u003e\u003cbr\u003eThe matching bearing cone for Dana Model 44HD (closed) 60, 61, and 70 closed or open knuckle front axle lower king pins and for Ford upper closed knuckle applications is \u003ca href=\"\/products\/50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles\" target=\"_blank\"\u003eQU50600\u003c\/a\u003e. Dodge, GM, International, and Jeep used \u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e Bronze Bushing for the upper king pins on closed knuckle Dana Model 60 and Model 70 front axles.\u003c\/p\u003e \u003cp\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1015-exploded-view-1985-1991-ford-f350-dana-60-front-axle\" target=\"_blank\"\u003eXV1015 1985-1991 Ford F350 Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Installer \u003c\/strong\u003e\u003cbr\u003eNeed the Installer Plate to seat this bearing cup in your housing? Order \u003ca href=\"\/products\/1813-qt1813-knuckle-bearing-or-king-pin-bearing-cup-installer-for-dana-44hd-60-70\" target=\"_blank\"\u003eQT1813\u003c\/a\u003e Bearing Cup Installer separately.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eAvailable Kits\u003c\/strong\u003e\u003cbr\u003eAlso see Kits \u003ca href=\"\/products\/40191-qu40191-dana-60-lower-king-pin-bearing-and-seal-kit\" target=\"_blank\"\u003eQU40191\u003c\/a\u003e, \u003ca href=\"\/products\/4512-qk4512-dana-60-front-king-pin-kit\" target=\"_blank\"\u003eQK4512\u003c\/a\u003e (open knuckle), \u003ca href=\"\/products\/4616-qk4616-dana-44-60-70-large-closed-knuckle-bearing-and-bushing-kit\" target=\"_blank\"\u003eQK4616\u003c\/a\u003e and \u003ca href=\"\/products\/4618-qk4618-dana-44hd-dana-60-dana-70-large-closed-knuckle-bearing-kit\" target=\"_blank\"\u003eQK4618\u003c\/a\u003e (closed knuckle) and \u003ca href=\"\/products\/50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles\" target=\"_blank\"\u003eQU50600\u003c\/a\u003e Bearing (all applications).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevrolet\/GMC:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eK20\/K25: 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e(Lower only, upper uses \u003ca href=\"\/products\/40093-qu40093-1975-1993-dana-60-plastic-upper-king-pin-bushing\" target=\"_blank\"\u003eQU40093\u003c\/a\u003e Bushing)\u003cbr\u003eK30, K3500: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eK3500\/V3500 1 Ton (square cab models): 1988, 1989, 1990, 1991\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003ePower Wagon 8-3\/4\" and 9-5\/8\" Front Axle\u003cbr\u003e\u003c\/strong\u003e1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cstrong\u003e\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e1943-1971\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eW200: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eW300: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW600: 1974, 1975, 1976, 1977, 1978\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 60, 61:\u003c\/strong\u003e\u003cbr\u003e(Lower only, upper uses \u003ca href=\"\/products\/40093-qu40093-1975-1993-dana-60-plastic-upper-king-pin-bushing\" target=\"_blank\"\u003eQU40093\u003c\/a\u003e Bushing)\u003cbr\u003eW-350 1 Ton*: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW-250 all with Cummins Diesel: 1989, 1990, 1991, 1992, 1993\u003cbr\u003e*For some reason, a few mid 1980's W-350 single rear wheel trucks have a wimpy Model 44 axle!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eF-250 with Heavy-Duty Model 44 Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 60:\u003cbr\u003e\u003c\/strong\u003e (uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eF-250 Crew Cab: 1974, 1975\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e(Lower only, upper uses \u003ca href=\"\/products\/40093-qu40093-1975-1993-dana-60-plastic-upper-king-pin-bushing\" target=\"_blank\"\u003eQU40093\u003c\/a\u003e Bushing)\u003cbr\u003eHeavy-Duty F-250, F-350: 1978, 1979\u003cbr\u003eF-350: 1985.5, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eW200, 1200 with Heavy-Duty Model 44 Front Axle: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e(Lower only, upper uses \u003ca href=\"\/products\/40093-qu40093-1975-1993-dana-60-plastic-upper-king-pin-bushing\" target=\"_blank\"\u003eQU40093\u003c\/a\u003e Bushing)\u003cbr\u003e1300 Camper Special: 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e(uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003e300, 1300: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e1600: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep: \u003cbr\u003e Closed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e (uses \u003ca href=\"\/products\/4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles\" target=\"_blank\"\u003eQA4936\u003c\/a\u003e 12 Bolt Knuckle Ball Seal)\u003cbr\u003eM715, M725, M726 Military 1-1\/4 ton: 1967, 1968, 1969\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":41659024834637,"sku":"50601","price":31.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu50601_side_1200_clean__96800_13187__37217.1707910184.1280.1280.jpg?v=1742582801"},{"product_id":"42234-tk42234-1-2-fine-thread-dana-44hd-dana-60-dana-70-steering-arm-stud","title":"TK42234 1\/2\" Fine Thread Dana 44HD, Dana 60, Dana 70 Steering Arm Stud","description":"\u003cp\u003e\u003cstrong\u003eTK42234 1\/2\" SAE Fine Thread Knuckle to Steering Arm Stud\u003c\/strong\u003e for Dana 44HD, Dana 60, and Dana 70 Front Axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/42235-tk42235-long-steering-arm-stud-for-ford-f250-dana-44hd-and-dana-60-axles\" target=\"_blank\"\u003eTK42235\u003c\/a\u003e Long Length Steering Arm for Closed Knuckle Stud for Ford F250 Dana 44HD, Dana 60 Axles\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eAll Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles in GM, Dodge, IHC, and Jeep\u003c\/p\u003e","brand":"USA Made Hardware","offers":[{"title":"Default Title","offer_id":41661053927501,"sku":"42234","price":34.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk42234_thmb__74521_23746__70573.1707961494.1280.1280.png?v=1779430983"},{"product_id":"42241-tk42241-long-left-knuckle-stud","title":"TK42241 Long Left Knuckle Stud","description":"\u003cp\u003e\u003cstrong\u003eTK42241 Long 1\/2\" x 1\/2\" Fine Thread Left Steering Arm Stud\u003c\/strong\u003e for Ford F250 Dana 44HD and Dana 60 Closed Knuckle Front Axles. These studs have the length for the brake hose bracket to mount above the cone nuts. Use 2 per axle. Note: these Studs have a larger diameter unthreaded area and are made to fit the LEFT side only! Use TK42235 for the right bearing cap!\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661069492301,"sku":"42241","price":25.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk42241_thmb__39295_23752__44067.1707962458.1280.1280.png?v=1779430903"},{"product_id":"42240-tk42240-1-2-sae-knuckle-stud","title":"TK42240 1\/2\" SAE Knuckle Stud","description":"\u003cp\u003e\u003cstrong\u003eTK42240 1\/2\" x 1\/2\" fine Thread Steering Arm Stud\u003c\/strong\u003e for Dana 44HD, Dana 60, and Dana 70 Closed Knuckle Front Axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep trucks. Note: these Studs have a larger diameter unthreaded area and are made to fit Steering Arms! For Plain Bearing Caps, use TK42234!\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661069525069,"sku":"42240","price":21.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk42240_thmb__55750_23750__19404.1707962470.1280.1280.png?v=1779431015"},{"product_id":"15188-qu15188-universal-steering-knuckle-d44hd-60-70","title":"QU15188 Universal Steering Knuckle D44HD, 60, 70","description":"\u003cp\u003e\u003cstrong\u003eQU15188 Universal Steering Knuckle\u003c\/strong\u003e for D44HD, 60, 70 Closed Knuckle Front Axles. Fits left or right side. Specific to Dana 60 front axles in 1967-1969 Jeep M715, M725, M726 4x4 military trucks but will also fit Dana 44HD and Dana 70 front axles if an appropriate Steering Arm is fabricated.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41661241983053,"sku":"15188","price":219.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15188_clean1__74687.1722462503.1280.1280.png?v=1742740422"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/closed_20knuckle_20parts_20hd__86224_5edc8fa9-7f09-4f78-9da4-fe51569fb237.jpg?v=1773182340","url":"https:\/\/torqueking.com\/collections\/closed-knuckle-parts-67-75-f250-dana-44hd.oembed","provider":"Torque King 4x4","version":"1.0","type":"link"}