{"title":"1976-1977.5 Ford F250 Dana 44 Front Axle","description":"\u003cp\u003eShop now for Parts, Tools, and Manuals to fit 1976-1977.5 Ford F250 4x4 Trucks with Dana 44 Open Knuckle Front Axles. Great selection. In stock. Quick shipping.\u003c\/p\u003e\n\u003cp\u003eWe have a wide selection of parts for 1976 to 1979 Ford F-250 Dana 44 open knuckle front driving axles. Starting with the 1976 model year, Ford F-250 4x4 trucks were built with an open knuckle, disc brake, Dana 44 monobeam axles which replaced the drum brake, closed knuckle design Dana 44 which had been used since 1959. Initially, Ford retained the remote mount transfer case, high-boy chassis but with a Dana 44 open knuckle front axles instead of a closed knuckle axle used through 1975. The 1976-1977-1\/2 axles can be identified by the type of wheel hub used. These 1976-1977-1\/2 axles have disc brakes and a wheel hub that is drilled and tapped on its outboard face in order to bolt on either a solid drive flange (full time) or external mount plastic dial Spicer hub lock (part time). 1977.5-1979 F-250 trucks are low riders with direct mount transfer cases. All 1977.5-1979 Dana 44 axles used an internal spline type wheel hub. Heavy-duty trucks could be ordered with an available 4500-pound capacity Dana 60 front axle for 1978 and 1979. 1979 was the last year Ford used a beam type Dana 44 front axle in the F-250 series. From 1980 through 1997, all 4x4 F-250 trucks used an Independent Front Suspension (IFS) drive axle.\u003c\/p\u003e","products":[{"product_id":"1024-qt1024-4x4-triple-metric-and-standard-thread-spindle-puller-usa-made","title":"QT1024 4x4 Triple Metric and Standard Thread Spindle Puller, USA Made","description":"\u003cp\u003e\u003cstrong\u003eQT1024 4x4 Triple Metric and Standard Thread Spindle Puller\u003c\/strong\u003e fits any 5\/8\" Slide Hammer to quickly and easily remove those rusted in front wheel bearing spindles on your 4x4 without damage! Essential for servicing axle u-joints, ball joints, spindle bearings, inner axle seals, and differentials on any domestic 4x4 with serviceable wheel bearings. The business end of this tool is threaded with 3 different thread sizes so you can pull easily spindles on most Ford 4x4s and full size Chevy, Dodge, GMC, IHC, and Jeep 4x4 vehicles. The 38mm metric thread fits Ford Ranger and Bronco II, the midsize 1-5\/8\" thread fits almost all Dana 35 and Dana 44 front axles plus GM 10 bolt front axles. Use the large 2\" thread to pull spindles on the big boys with Dana 50IFS, Dana 60, and Dana 61 front axles. USA Made.\u003c\/p\u003e\n\u003cp\u003eAlso See: \u003ca href=\"\/products\/881024-qt1024i-4x4-triple-metric-and-standard-thread-spindle-puller-imported\" target=\"_blank\"\u003eQT1024i\u003c\/a\u003e 4x4 Triple Metric and Standard Thread Spindle Puller, Imported.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eRusted Spindles Removing rusted in 4x4 Front Sp\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRusted Spindles \u003c\/strong\u003e\u003cbr\u003eRemoving rusted in 4x4 Front Spindles can be a bear, but I have never had one I could not pull with one of our spindle pullers and either \u003ca href=\"\/products\/9302-qt9302-5-pound-slide-hammer\" target=\"_blank\"\u003e\u003cspan\u003eQT9302\u003c\/span\u003e \u003c\/a\u003e5 lb. or \u003ca href=\"\/products\/9303-qt9303-10-pound-slide-hammer\" target=\"_blank\"\u003e\u003cspan\u003eQT9303\u003c\/span\u003e \u003c\/a\u003e10 lb. slide hammer. I have seen a lot of spindles with mashed threads or egg shaped bearing surfaces that were ruined by folks who had a big hammer, but not much common sense.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFits Ford Ranger and Bronco II with metric 38mm x 1.5 pitch spindle threads. 1 5\/8\" for SUV's, 1\/2 ton and most 3\/4 trucks plus 1974, 1975, 1976, 1977 Ford Dana 60, and 2\" for heavy 3\/4 and 1 ton trucks.\u003c\/p\u003e\n\u003cp\u003eApplications include: \u003cbr\u003e\u003cbr\u003eChevy Blazer, GMC Jimmy and GM 1\/2 to 1 ton models 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e\u003cbr\u003eDodge Ram Charger and W100-350 trucks 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cbr\u003eFord Bronco and F-100-F350 trucks 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003e\u003cbr\u003eIHC 1\/2 to 1 ton trucks to 1975 except 1974-1975 100 and 150. 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e\n\u003cp\u003eJeep J-Series J10, J20, Wagoneer, Cherokee, Cherokee Chief: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 \u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655848927309,"sku":"1024","price":160.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT1024_A1-clean-1200-webp-mf__57745.1712352882.1280.1280.jpg?v=1742469579"},{"product_id":"1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket","title":"QT1025 Universal 4 Lug \u0026 6 Lug Spindle Hub Nut Socket","description":"\u003cp\u003e\u003cstrong\u003eQT1025 Universal 4 Lug\/6 Lug Front or Rear Spindle Nut Socket \u003c\/strong\u003e fits all 6 slot Dana Spicer 50\/Model 60 front axles and most 4 slot Dana Spicer Model 30\/Model 44 or GM 10 bolt front spindle nuts on Chevy, Dodge, Ford, GMC, IHC, and Jeep front axles. Also fits 1946-1972 GM H052, H072 Rear Axles, 1973 to 2010 GM 14 Bolt full float rear axles with 6 hole\/slot rear spindle nuts and 2003 to 2018 Dodge Ram 2500 and 3500 trucks which are equipped with AAM 10.50\", 11.50\" or 11.8\" rear axles. Will not work on '85-'96 Ford 1\/2 ton models with ratchet type spindle nut. 1\/2\" drive socket has 4 internal lugs for the lighter axles and 6 external lugs for heavier axles. USA Made. \u003cspan style=\"color: #ff0000\"\u003e\u003cem\u003eNot for impact use. Always Wear safety eye protection!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003ca href=\"#note1\"\u003e\u003cstrong\u003eNut Torque\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eDrive Lugs\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNut Torque \u003c\/strong\u003e\u003cbr\u003e The spindle nut torque will vary with year and model, refer to the factory shop manual for your vehicle for spindle nut adjustment procedures.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Drive Lugs\u003c\/strong\u003e\u003cbr\u003e This socket has 2 sets of drive lugs. The inner 4 lug set fit front axles with 1-5\/8\" thread, 4 slot double spindle net sets (\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e, \u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e) typically found on Dana 44 and GM 10 Bolt front axles. The 6 outside drive lugs fit 2\" thread, 6 slot double spindle nut sets (\u003ca href=\"\/products\/4728-qk4728-4-piece-spindle-nut-kit-for-dana-60-front-gm-14-bolt-rear-axles\" target=\"_blank\"\u003eQK4728\u003c\/a\u003e) found on some 1977 to 1984 Dana 60 and Dana 50IFS front axles and many 1946 and later GM or AAM full float rear axles with either single or double rear spindle nuts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Matching Parts\u003cbr\u003e\u003c\/strong\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy\/GMC 1 Ton Dana 60 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1009-1980-1983-5-ford-dana-50ifs-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1009 1980-1983.5 Ford Dana 50IFS Front Axle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e 3 Piece Front Spindle Nut Kit with 4 Slot Nuts, 1-5\/8\" Thread for Full Time and Manual Hubs\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e 3 Piece Front Spindle Nut Kit with 4 Slot Nuts, 1-5\/8\" Thread and Tabbed Lock Washer for Auto Hubs\u003cbr\u003e\u003ca href=\"\/products\/4728-qk4728-4-piece-spindle-nut-kit-for-dana-60-front-gm-14-bolt-rear-axles\" target=\"_blank\"\u003eQK4728\u003c\/a\u003e 4 Piece, Round, 6 Notch 1977-1984 Front or 1946-1981 Rear Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/10846-qu10846-dodge-aam-spindle-nut\" target=\"_blank\"\u003eQU10846\u003c\/a\u003e Spindle Nut for 2003-2018 Ram AAM 1050, 1150, 1180 Rear Axles\u003cbr\u003e\u003ca href=\"\/products\/10845-qu10845-locking-key-for-spindle-nut\" target=\"_blank\"\u003eQU10845\u003c\/a\u003e Spindle Nut Lock Key for 2003-2018 Ram AAM 1050, 1150, 1180 Rear Axles\u003cbr\u003e\u003ca href=\"\/products\/10866-qu10866-spindle-nut-lock-ring\" target=\"_blank\"\u003eQU10866\u003c\/a\u003e Spindle Nut Lock Ring for 2003-2018 Ram AAM 1050, 1150, 1180 Rear Axles\u003cbr\u003e\u003ca href=\"\/products\/30111-qu30111-rear-hub-spindle-nut-for-aam-gm-full-floating-rear-axles\" target=\"_blank\"\u003eQU30111\u003c\/a\u003e Spindle Nut for 1982-2010 GM and AAM 14 Bolt Full-Floating Rear Axles in Chevy and GMC Trucks\u003cbr\u003e\u003ca href=\"\/products\/30110-qu30110-spindle-nut-lock-key-for-gm-and-aam-full-floating-rear-axles\" target=\"_blank\"\u003eQU30110\u003c\/a\u003e Spindle Nut Lock Key for 1982-2010 GM and AAM 14 Bolt Full-Floating Rear Axles in Chevy and GMC Trucks\u003cbr\u003e\u003ca href=\"\/products\/30109-qu30109-rear-spindle-nut-retainer-ring-for-gm-aam-14-bolt-rear-axles\" target=\"_blank\"\u003eQU30109\u003c\/a\u003e Spindle Nut Retainer Ring for 1982-2010 GM and AAM 14 Bolt Full-Floating Rear Axles in Chevy and GMC Trucks\u003cbr\u003e\u003ca href=\"\/products\/1016-qt1016i-6-lug-spindle-nut-socket-for-front-and-rear-axle-applications\" target=\"_blank\"\u003eQT1016i\u003c\/a\u003e 6 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003cbr\u003e\u003c\/strong\u003eFront Axle Applications:\u003cbr\u003eK5, K10, K1000, K15, K1500, V1500, K20, K25, K2500, V2500 Dana 44 or GM 10 Bolt Front Axles: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 \u003cbr\u003eK30, K35 Dana 60 Front Axle: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003eRear Axle Applications:\u003cbr\u003eGM 3\/4 ton or 1 ton H052 and H072 Full Floating Rear Axles: 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eGM or AAM 10.5\" 14 Bolt Full Floating Rear Axle in C20, K20, C25, K25, C2500, K2500, C30, K30, C35, K35, C3500, K3500, R3500, V3500, Sierra HD 2500\/3500, Silverado HD 2500\/3500: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010\u003cbr\u003eAAM 11.5\" 14 Bolt Full Floating Rear Axle in Sierra HD 2500\/3500, Silverado HD 2500\/3500: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Ram\u003c\/strong\u003e\u003cbr\u003eFront Axle Applications:\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250, Ramcharger Dana 44 Front Axles: 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cbr\u003eRear Axle Applications: \u003cbr\u003e Full Float Model 60 or Model 70 Rear Axles equipped with TK4000 Spindle Nut Upgrade Kit: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eRam 1500 Mega Cab AAM 10.5\" Rear Axle: 2004, 2005, 2006, 2007, 2008, 2009, 2010\u003cbr\u003eRam 2500, Ram 3500 AAM 10.5\", 11.5\", Chassis Cab 12\" Rear Axles: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150, F250 Dana 44, Dana 44HD Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, F250, Bronco Dana 44IFS Front Axle with Double Spindle Nut: 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 Crew Cab Dana 60 Front Axle: 1974, 1975, 1976, 1977 \u003cbr\u003eF250, F350 Dana 60 Front Axle: 1978, 1979\u003cbr\u003eF250, F350 Dana 50IFS Front Axle: 1980, 1981 1982, 1983, 1984 (Dana only lists for 1980, Ford lists to 1984, My shop experience indicates Ford is correct.)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1100, 1110 Series 1\/2 Ton Dana 44 Front Axle: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, Cherokee Chief Dana 44 Front Axle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 1982, 1983\u003cbr\u003eJ10, J20 Truck Dana 44 Front Axle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eWagoneer, Grand Wagoneer: Dana 44 Front Axle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41655849943117,"sku":"1025","price":52.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1025_1600-1__27005_27012__18354.1708621726.1280.1280.png?v=1742469598"},{"product_id":"1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made","title":"QT1032 Differential Case Spreader for Dana 25 to Dana 80 Axles USA Made","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1032 USA Made Dana 25-Dana 80 Differential Case Spreader \u003c\/strong\u003efor Dana-Spicer Axles Dana Axles are designed to have a differential bearing preload of .010\"-.015\". With our Case Spreader, removing and installing front and rear differentials on your 4x4 is much easier and will help prevent damage to those expensive differential components. Simply insert the attachment pins into the holes in your differential casting, mount a dial indicator to measure the amount of spread, and turn the adjuster with a wrench to spread your housing up to .020\" depending upon model. This Case Spreader will work on Dana 25, Dana 27, Dana 30, Dana 35, Dana 44, Dana 44HD, Dana 50, Dana 60, Dana 61, Dana 70, Dana 70HD, and Dana 80 front or rear beam axles. Also works on 8.8 Ford and GM 10-12 Bolt Differentials. This Spreader was designed before the advent of the Model 80 axle, so when used on the 80, some bar deflection may occur at the maximum spread. Made in Montana, U.S.A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv2011-dana-80-rear-axle-exploded-view-2000-2002-dodge-ram-2500-ram-3500\" target=\"_blank\"\u003eXV2011 2000-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axle\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eNecessary?\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eMatching Parts-Dana 70HD Rear Axles\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eMatching Parts-Dodge Dana 80 Rear Axles\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eMatching Parts-Ford Dana 80 Rear Axles \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts-Chevy \u0026amp; GMC Dana 80 Rear Axles\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNecessary?\u003c\/strong\u003e\u003cbr\u003eIs a Case Spreader really necessary? Considering that at least 95% of Dana differentials are removed and installed without a Case Spreader the answer must be no. But, if we change your question to: \"Is a Case Spreader really necessary to prevent damage to my parts or myself?\" Then the answer is an unqualified yes. Using a Spreader to relieve the differential bearing preload means it will be much easier to get the diff in and out and there is much less chance of injuring yourself or wrecking parts by using the what we call \"cowboy\" methods. Axles, differentials, and case spreaders are all really heavy if they fall on any portion of your body. Use care and common sense, if you don't know how to safely work on your vehicle, find someone who does!\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Matching Parts-Dana 70HD Rear Axles\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402\u003c\/a\u003e Timken Differential Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Axle Shaft Flange Gasket, most Dodge and Ford\u003cbr\u003e\u003ca href=\"\/products\/30010-qu30010-rear-axle-shaft-flange-gasket-1947-1991-gm-rear-axles\" target=\"_blank\"\u003eQU30010\u003c\/a\u003e Axle Shaft Flange Gasket, Chevy and GMC\u003cbr\u003e\u003ca href=\"\/products\/40577-qu40577-7-16-id-tapered-lock-wedge-or-cone-for-dana-rear-axles\" target=\"_blank\"\u003eQU40577\u003c\/a\u003e Locking Bushing Cone for Vintage Rear Axle Shafts\u003cbr\u003e\u003ca href=\"\/products\/90008-qu90008-gear-marking-compound\" target=\"_blank\"\u003eQU90008\u003c\/a\u003e Gear Marking Compound\u003cbr\u003e\u003ca href=\"\/products\/40367-qu40367-dana-60-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU40367\u003c\/a\u003e Dana 70 Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/42030-qu42030-reusable-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU42030\u003c\/a\u003e Reusable Dana 70 Differential Gasket\u003cbr\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service Manual for Dana Monobeam Axles\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403\u003c\/a\u003e Timken Taper Bearing\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Matchiing Parts-Dodge Dana 80 Rear Axles\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402\u003c\/a\u003e Timken Differential Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/134889-tk4889-dana-80-differential-and-pinion-bearing-only-kit\" target=\"_blank\"\u003eTK4889\u003c\/a\u003e Premium Differential Bearing Kit only 1994-2002\u003cbr\u003e\u003ca href=\"\/products\/4659-tk4659-94-99-dodge-dana-80-diff-bearing-seal-overhaul-kit-with-shims\" target=\"_blank\"\u003eTK4659\u003c\/a\u003e Premium Master Differential Bearing and Seal Kit 1994-1999\u003cbr\u003e\u003ca href=\"\/products\/4778-tk4778-premium-dana-80-rear-diff-overhaul-kit-for-2000-2002-dodge-ram\" target=\"_blank\"\u003eTK4778\u003c\/a\u003e Premium Master Differential Bearing and Seal Kit 2000-2002\u003cbr\u003e\u003ca href=\"\/products\/50437-qu50437-standard-differential-bearing-and-seal-kit-dana-80-rear-axles\" target=\"_blank\"\u003eQU50437\u003c\/a\u003e Standard Differential Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/40213-qu40213-dana-80-differential-shim-kit-for-dodge-and-ford-rear-axles\" target=\"_blank\"\u003eQU40213\u003c\/a\u003e Dana 80 Differential Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/6640260-tk40260-dana-80-outboard-differential-bearing-spacer-set\" target=\"_blank\"\u003eTK40260\u003c\/a\u003e Outboard Differential Bearing Spacer Set\u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Axle Shaft Flange Gasket, most Dodge\u003cbr\u003e\u003ca href=\"\/products\/40491-qu40491-dana-80-bare-fast-ratio-open-differential-case\" target=\"_blank\"\u003eQU40491\u003c\/a\u003e Bare Differential Case for 3.54 Ratio\u003cbr\u003e\u003ca href=\"\/products\/40490-qu40490-dana-80-bare-slow-ratio-open-differential-case\" target=\"_blank\"\u003eQU40490\u003c\/a\u003e Bare Differential Case for 4.10 Ratio\u003cbr\u003e\u003ca href=\"\/products\/42031-qu42031-dana-80-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42031\u003c\/a\u003e Reusable Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service Manual for Dana Monobeam Axles\u003cbr\u003e\u003ca href=\"\/products\/90008-qu90008-gear-marking-compound\" target=\"_blank\"\u003eQU90008\u003c\/a\u003e Gear Marking Compound\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403\u003c\/a\u003e Timken Taper Bearing\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts-Ford Dana 80 Rear Axles\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402\u003c\/a\u003e Timken Differential Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50437-qu50437-standard-differential-bearing-and-seal-kit-dana-80-rear-axles\" target=\"_blank\"\u003eQU50437\u003c\/a\u003e Differential Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/40213-qu40213-dana-80-differential-shim-kit-for-dodge-and-ford-rear-axles\" target=\"_blank\"\u003eQU40213\u003c\/a\u003e Dana 80 Differential Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Axle Shaft Flange Gasket for E350 and E450 Vans\u003cbr\u003e\u003ca href=\"\/products\/40241-qu40241-steel-hub-gasket\" target=\"_blank\"\u003eQU40241\u003c\/a\u003e Axle Shaft Flange Gasket for 1988-1991 F350 and 1995-1998 F450 \u003cbr\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service Manual for Dana Monobeam Axles\u003cbr\u003e\u003ca href=\"\/products\/90008-qu90008-gear-marking-compound\" target=\"_blank\"\u003eQU90008\u003c\/a\u003e Gear Marking Compound\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403\u003c\/a\u003e Timken Taper Bearing\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eMatching Parts-Chevy \u0026amp; GMC Dana 80 Rear Axles\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402\u003c\/a\u003e Timken Differential Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50437-qu50437-standard-differential-bearing-and-seal-kit-dana-80-rear-axles\" target=\"_blank\"\u003eQU50437\u003c\/a\u003e Differential Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/40213-qu40213-dana-80-differential-shim-kit-for-dodge-and-ford-rear-axles\" target=\"_blank\"\u003eQU40213\u003c\/a\u003e Dana 80 Differential Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service Manual for Dana Monobeam Axles\u003cbr\u003e\u003ca href=\"\/products\/90008-qu90008-gear-marking-compound\" target=\"_blank\"\u003eQU90008\u003c\/a\u003e Gear Marking Compound\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403\u003c\/a\u003e Timken Taper Bearing\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eWorks on the following Dana-Spicer Solid Beam Axle Models:\u003cbr\u003eModel 25, Model 27, Model 30, Model 35, Model 44, Model 50, Model 60, Model 61, Model 70, Model 70HD, Model 80\u003c\/p\u003e\n\u003cp\u003eCorporate Axles:\u003cbr\u003e8.8 Ford\u003cbr\u003e10-12 Bolt GM\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655854039117,"sku":"1032","price":304.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1032_2_1200_clean__67005_13812__50856.1707817298.1280.1280.jpg?v=1742469699"},{"product_id":"1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles","title":"QT1041 Inner Axle Shaft Seal Installer with Depth Stop for Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"mimlogo.png\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.png\" title=\"mimlogo.png\" width=\"50\"\u003e\u003cbr\u003eQT1041 Inner Front Axle Shaft Oil Seal Installer for Dana 44 Front Axles \u003c\/strong\u003e installs the \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e current design original equipment CR made seal in many older 4x4 trucks with Dana-Spicer Model 44 axles. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time. Our custom, CNC Precision Machined, solid steel Seal Installer support these difficult to install seals in 3 locations so the seal cannot cock or get crushed during installation. (Also see \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e). Included in \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Kit and \u003ca href=\"\/products\/4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set\" target=\"_blank\"\u003eTS4871\u003c\/a\u003e Tool Set. Made in U.S.A. by Us Here in Montana.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*Important Note: Our custom Tool is made specifically for the \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e current design original equipment CR made seal. It most likely will NOT fit other make seals! We make our Tool EXACT so it will fit the seal and install super easy \u0026amp; perfectly in the axle housing. We like a professional installation in super quick time with no 'do overs'.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003ePrep\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003eBenefit of Custom Tool\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eFixed Depth Installer\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePrep:\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace the axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBenefit of Custom Tool:\u003c\/strong\u003e\u003cbr\u003eInstalling Dana 44 Inner Axle Shaft Oil Seals without damaging the seal, your axle housing, or your fingers can be difficult UNLESS you have the correct tools for the job. Combine this seal installer with our \u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Press Screw Assembly and \u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Thrust Plate, and you will quickly and easily install those pesky oil seals without mashing your fingers or cussing a blue streak! Plus the Seal will be installed right the first time, with no warranty comebacks!!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFixed Depth Installer:\u003c\/strong\u003e\u003cbr\u003eWe make two types of Seal Installers: Adjustable Depth and Fixed Depth. The QT1041 Installer on this page is a Fixed Depth Installer that will firmly stop at a preset depth (no measuring involved). Choose this Fixed Depth Installer if you want quick, fool-proof seal installation. Choose our \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Adjustable Depth Seal Installer if you want the flexibility to offset the seals to miss grooves worn in your axle shafts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seal\u003cbr\u003e\u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Inner Axle Seal Kit (includes 2 Seals, 1 for each side)\u003cbr\u003e\u003ca href=\"\/products\/4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set\" target=\"_blank\"\u003eTS4871\u003c\/a\u003e Inner Axle Seal Tool Set (no seals)\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications with Dana 44 Front Axle:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972.5, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250: 1967, 1968, 1969\u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC: \u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971.5, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655860854861,"sku":"1041","price":72.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1041_1200_clean__29660_12042__53623.1707817440.1280.1280.jpg?v=1742469822"},{"product_id":"1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings","title":"QT1044 Inner Pinion Bearing Installer for 1-5\/16\"-1-3\/8\" ID Bearings","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1044 1-5\/16\"-1-3\/8\" Inner Pinion Bearing Installer\u003c\/strong\u003e for Ford 9\"rear axle, Dana 25, Dana 27, Dana 30, Dana 44, Dana 44IFS, Dana 50, and Dana 50IFS front\/rear drive axles or other applications that require installing bearings with 1-5\/16\" to 1-3\/8\" inside diameters on long shafts. Made of steel construction with Black Oxide finish. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUsing\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUsing\u003c\/strong\u003e\u003cbr\u003eWith this tool, you can easily drive on or press on your inner pinion bearing. Using a press is preferred, but regardless of the installation method, be sure to place a piece of stiff cardboard between the pinion and table. Doing so will protect the pinion teeth from getting chipped or damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e Dana 25, Dana 27, Dana 30, Dana 44, Dana 44IFS, Dana 50, and Dana 50IFS\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655862493261,"sku":"1044","price":43.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1044_1200_clean__26998_22003__66828.1707817543.1280.1280.jpg?v=1742469871"},{"product_id":"90018-qu90018-pyroplex-protection-es-2-synthetic-grease","title":"QU90018 Pyroplex Protection ES 2 Synthetic Grease","description":"\u003cp\u003e\u003cstrong\u003eQU90018 Pyroplex® Protection ES Synthetic Grease\u003c\/strong\u003e provides extended service protection for all chassis, driveshaft, u-joint, and wheel bearing applications under the harshest on and off road conditions! This NLGI #2 GC-LB grease is Hydro-Activated™ to become tackier when exposed to moisture. Offers superior corrosion and wear protection in a variety of environments. Provides excellent low and high-temperature performance. Enhanced extreme pressure performance for greater load carrying ability. This is the grease we use in our shop. Made in U.S.A. 14 oz. tube fits all standard grease guns. (\u003cem\u003eCannot be Air Shipped.)\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003eAlso See Our \u003ca href=\"\/collections\/specialized-lubricants\" target=\"_blank\"\u003eLubricants Web Page\u003c\/a\u003e for Our Complete Selection of Greases\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSynthetic Formula\u003c\/a\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSynthetic Formula \u003c\/strong\u003e\u003cbr\u003eThis is my favorite grease to use on almost all automotive and agricultural applications. It resists water washout better than any automotive grease I have ever used, plus the synthetic formula provides long-lasting, high-quality lubrication for both high and low-speed bearings, shafts, and bushings.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eUniversal for most 4x4 chassis and power train components calling for a NLGI #2 EP Grease\u003c\/p\u003e \u003cp\u003e* For a NON-synthetic grease of similar performance, use \u003ca href=\"\/products\/90033-qu90033-lubriplate-high-performance-wheel-bearing-grease-16-oz\" target=\"_blank\"\u003eQU90033\u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Castrol","offers":[{"title":"Default Title","offer_id":41655875371085,"sku":"90018","price":18.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu90018_1200_clean__97521_12233__55944.1707817975.1280.1280.jpg?v=1742470299"},{"product_id":"5540547-qu40547u-used-spicer-splined-hub-body","title":"QU40547U Used Spicer Splined Hub Body","description":"\u003cp\u003e\u003cstrong\u003eQU40547U Good Used Spicer Splined Hub Body\u003c\/strong\u003e for Chevy, Ford, and GMC Dana 44 or closed knuckle Ford Dana 60 front drive axles with external mount plastic dial Spicer factory hubs that mount to the wheel hub with 6 long 3\/8\" Allen Head Bolts. Available while supplies last.\u003c\/p\u003e \u003cp\u003eSee \u003ca href=\"\/products\/40547-qu40547-spicer-splined-hub-body\" target=\"_blank\"\u003eQU40547\u003c\/a\u003e for New Spicer Splined Hub Body\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eOriginal Equipment Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOriginal Equipment Parts\u003c\/strong\u003e\u003cbr\u003eSpicer made external mount Plastic Dial free-wheel Hub-Locks from the late 1960's to the mid 1970's. These Hubs were the factory original equipment parts for both to Ford and GM 3\/4 ton 4x4 trucks with Dana 44 front axles. They were also used on Ford F-250 Crew Cab trucks with Dana 60 closed knuckle front axles from 1974-1975. Most parts for these hubs have been out of production for decades so parts availability is becoming quite limited.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/9920109-qu20109-spicer-hub-axle-shaft-drive-gear-for-external-mount-hubs\" target=\"_blank\"\u003eQU20109\u003c\/a\u003e Axle Shaft Gear\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40546-qu40546uas-used-spicer-external-mount-lockout-hub-chrome-cap\" target=\"_blank\"\u003eQU40546UAS\u003c\/a\u003e Outer Chrome Cap\u003cbr\u003e\u003ca href=\"\/products\/20114-qu20114-spicer-hub-clutch-gear\" target=\"_blank\"\u003eQU20114\u003c\/a\u003e Hub Gear\u003cbr\u003e\u003ca href=\"\/products\/40256-tk40256-red-torque-king-heavy-duty-replacement-hub-dial\" target=\"_blank\"\u003eTK40256\u003c\/a\u003e Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/40471-tk40471-hub-dial-o-ring-spicer-plastic-hub-dials-in-ford-gm-3-4-tons\" target=\"_blank\"\u003eTK40471\u003c\/a\u003e Dial Sealing Ring \u003cbr\u003e\u003ca href=\"\/products\/9940406-qu40406-spicer-hub-cam-for-external-mount-front-hubs-on-ford-gm\" target=\"_blank\"\u003eQU40406\u003c\/a\u003e Hub Cam \u003cbr\u003e\u003ca href=\"\/products\/40257-qu40257-allen-head-hub-bolt\" target=\"_blank\"\u003eQU40257\u003c\/a\u003e Hub Bolt\u003cbr\u003e\u003ca href=\"\/products\/40231-qu40231-spicer-hub-sealing-lock-washer\" target=\"_blank\"\u003eQU40231\u003c\/a\u003e Sealing Washer \u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Metal Inner Hub Gasket\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Outer Fiber Hub Gasket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC 3\/4 ton 4x4\u003c\/strong\u003e\u003cbr\u003eK20, K25: 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord F-250 3\/4 ton 4x4:\u003c\/strong\u003e\u003cbr\u003eClosed Knuckle Dana 44HD 3500# Axle: 1972, 1973, 1974, 1975\u003cbr\u003eOpen Knuckle Dana 44 Axle with 6 Bolt External Mount Spicer Hub: 1976, 1977, 1977.5\u003cbr\u003eCrew Cab with Dana 60 Closed Knuckle Axle: 1973, 1974, 1975\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41655943430221,"sku":"5540547","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40547u_1200_clean__48112_11934__17135.1707818853.1280.1280.jpg?v=1742471344"},{"product_id":"473-vsg4550-axle-u-joint-with-internal-c-clip-service-dvd-video","title":"VSG4550 Axle U-Joint with Internal C-Clip Service DVD Video","description":"\u003cp\u003e\u003cstrong\u003eVSG4550 Axle U-Joint with Internal C-Clip Service DVD Video\u003c\/strong\u003e featuring both greaseable and non-greaseable u-joints.\u003c\/p\u003e","brand":"Dan the Gear Man","offers":[{"title":"Default Title","offer_id":41655951949901,"sku":"473","price":10.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/1891133873358730495-49963__77192_159__60016.1707819037.1280.1280.jpg?v=1742471565"},{"product_id":"707-qu90017-1-pound-tub-pennzoil-707l-wheel-bearing-and-chassis-grease","title":"QU90017 1 Pound Tub Pennzoil 707L Wheel Bearing and Chassis Grease","description":"\u003cp\u003e\u003cstrong\u003eQU90017 Pennzoil 707L 1 Pound Tub Premium Red Wheel bearing Grease\u003c\/strong\u003e is a premium, extreme pressure, high performance wheel bearing and chassis grease with special additives providing excellent rust protection and high resistance to water washout. QU90017 is a high quality, non-synthetic grease suitable for all 4x4 and light truck disc and drum brake wheel bearing applications, plus it is an ideal grease for chassis lubrication. NLGI rating: #2 GC-LB Made in U.S.A. 16 oz resealable container. (Cannot be Air Shipped.)\u003c\/p\u003e\n\u003cp\u003eAlso available in 14oz tube: \u003cstrong\u003e\u003ca href=\"\/products\/90013-qu90013-14oz-tube-pennzoil-707l-wheel-bearing-and-chassis-grease\"\u003eQU90013 \u003c\/a\u003eTube Red Grease\u003c\/strong\u003e 14 oz tube fits all standard grease guns.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/Pennzoil_707L.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/Pennzoil_707L_MSDS.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Pennzoil","offers":[{"title":"Default Title","offer_id":41656025514061,"sku":"707","price":9.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/707tubclean__26484_10536__80714.1707820017.1280.1280.jpg?v=1742473089"},{"product_id":"1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip","title":"QT1100 1\" X 8\" Driver Handle for Installers \u0026 Removers with 5\/8\" Tip","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1100 1\" x 8\" Standard Duty Installer Driver Handle with 5\/8\" Tip \u003c\/strong\u003eand knurled hand grip is used with \u003ca href=\"\/collections\/wheel-bearing-and-hub-tools\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eQT15XX\u003c\/span\u003e\u003c\/a\u003e series Seal Installers and \u003ca href=\"\/collections\/bearing-cup-installers\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eQT18XX\u003c\/span\u003e\u003c\/a\u003e series Bearing Cup Installers with 5\/8\" center holes. QT1100 will become one of the most used tools in your shop as it fits almost all our time saving seal and bearing cup installers. Give up those part wrecking, time wasting, hand smashing jury-rig installers and do the job quickly and efficiently with QT1100 and the correct seal and cup installers for your application! Black Oxide finish\u003cem\u003e.\u003c\/em\u003e 1\" diameter x 8\" usable length for general purpose use. Made in Montana, U.S.A.\u003c\/p\u003e\n\u003cp\u003eSee \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116 for the Pro-Duty\u003c\/a\u003e 1-1\/4\"x 8\" Driver Handle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eFor 5\/8\" Center Hole\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eFront Wheel Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eFront Wheel Seal Installers\u003c\/strong\u003e \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eFront Spindle and Axle Shaft Seal, Bearing, Bushing Installers\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eRear Wheel Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eRear Wheel Bearing Seal Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eSemi-Float Rear Axle Wheel Bearing Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003ePinion Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eDifferential Side Bearing Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note10\"\u003e\u003cstrong\u003eTransmission Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note11\"\u003e\u003cstrong\u003eTransmission Seal Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note12\"\u003e\u003cstrong\u003eTransfer Case Bearing Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note13\"\u003e\u003cstrong\u003eTransfer Case Seal Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note14\"\u003e\u003cstrong\u003eSteering Gear Bearing and Seal Installers\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFor 5\/8\" Center Hole\u003c\/strong\u003e\u003cbr\u003eMade for QUAD 4x4 Bearing and Seal installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e 8\", \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e 14\" and 1-1\/4\" diameter for professional use (\u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e 8\", \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e 14\").\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFront Wheel Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy\/GMC 1 Ton Dana 60 Front Axle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e Installs \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e and \u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50446\u003c\/a\u003e or Timken Bearing Cups JLM104910 and LM104911\u003cbr\u003e\u003ca href=\"\/products\/1804-qt1804-bearing-cup-installer-3-13-16-approximate-outside-diameter\" target=\"_blank\"\u003eQT1804\u003c\/a\u003e Installs \u003ca href=\"\/products\/50396-qu50396-timken-3-13-16-od-taper-wheel-or-diff-bearing-cup\" target=\"_blank\"\u003eQU50396\u003c\/a\u003e and \u003ca href=\"\/products\/50413-qu50413-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50413\u003c\/a\u003e or Timken Bearing Cups 382A and 28622\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFront Wheel Seal Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy\/GMC 1 Ton Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFront Spindle and Axle Shaft Seal, Bearing, Bushing Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRear Wheel Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xvd284-2019-up-ram-4500-5500-drw-rear-hub-aam-12-exploded-view\"\u003eXVD284 2019-up Ram 4500, 5500 DRW Hub\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e Installs \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e and \u003ca href=\"\/products\/50732-qu50732-timken-high-performance-outer-wheel-bearing-cup\" target=\"_blank\"\u003eQU50732\u003c\/a\u003e,or Timken Bearing Cups LM104911 and NP913325\u003cbr\u003e\u003ca href=\"\/products\/1804-qt1804-bearing-cup-installer-3-13-16-approximate-outside-diameter\" target=\"_blank\"\u003eQT1804\u003c\/a\u003e Installs \u003ca href=\"\/products\/50396-qu50396-timken-3-13-16-od-taper-wheel-or-diff-bearing-cup\" target=\"_blank\"\u003eQU50396\u003c\/a\u003e, \u003ca href=\"\/products\/50413-qu50413-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50413\u003c\/a\u003e, \u003ca href=\"\/products\/50623-qu50623-inner-rear-wheel-bearing-cup-for-ford-sterling-10-5-rear-axles\" target=\"_blank\"\u003eQU50623\u003c\/a\u003e, and \u003ca href=\"\/products\/50735-qu50735-timken-high-performance-inner-wheel-bearing\" target=\"_blank\"\u003eQU50735\u003c\/a\u003e or Timken Bearing Cups 382A, 28622, NP064306, and NP706218\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRear Wheel Bearing Seal Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSemi-Float Rear Axle Wheel Bearing Installers \u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePinion Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e Installs \u003ca href=\"\/products\/50404-qu50404-timken-inner-or-outer-pinion-bearing-cup\" target=\"_blank\"\u003eQU50404\u003c\/a\u003e or Timken Bearing Cup M802011\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDifferential Side Bearing Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note10\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 10:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransmission Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e installs \u003ca href=\"\/products\/10125-qu10125-timken-nv4500-input-bearing-cup\" target=\"_blank\"\u003eQU10125\u003c\/a\u003e (NV4500) \u003ca href=\"\/products\/10137-qu10137-timken-special-1996-2007-gm-nv4500-input-bearing-cup\" target=\"_blank\"\u003eQU10137\u003c\/a\u003e (NV4500), and \u003ca href=\"\/products\/12051-qu12051-timken-countershaft-center-bearing-cup-for-nv5600-6-speed\" target=\"_blank\"\u003eQU12051\u003c\/a\u003e (NV5600) or Timken Bearing Cups M802011AP, NP728109, NP882000\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note11\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 11:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransmission Seal Installers \u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note12\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 12:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransfer Case Bearing Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note13\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 13:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransfer Case Seal Installers \u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note14\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 14:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e \u003cstrong\u003eSteering Gear Bearing and Seal Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656049827917,"sku":"1100","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT1100_094348_1600__42281_29740__36096.1708621796.1280.1280.png?v=1742473547"},{"product_id":"1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks","title":"QT1812 Inner\/Outer Bearing Cup Installer for Chevy, Dodge, Ford, GMC, and Jeep SUVs \u0026 Trucks","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1812 Outer Pinion Bearing Cup Installer\u003c\/strong\u003e is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep SUV's, 1\/2, 3\/4 and 1 ton trucks from 1942 to current. QT1812 fits our \u003ca href=\"\/products\/50400-qu50400-timken-outer-pinion-bearing-cup-for-dana-60-61-70-70hd-axles\" target=\"_blank\"\u003eQU50400\u003c\/a\u003e (Dana Axle Outer Pinion), \u003ca href=\"\/products\/50539-qu50539-timken-pinion-bearing-cup\" target=\"_blank\"\u003eQU50539\u003c\/a\u003e (Inner or Outer Axle Pinion), \u003ca href=\"\/products\/50533-qu50533-timken-outer-pinion-bearing-cup\" target=\"_blank\"\u003eQU50533\u003c\/a\u003e (Dana Axle Outer Pinion), and \u003ca href=\"\/products\/50574-qu50574-timken-bearing-cup-for-jeep-rear-wheel-applications\" target=\"_blank\"\u003eQU50574\u003c\/a\u003e (Dana 20, 21, 300 Transfer Cases) bearing cups. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5\/8\" tip. USA Made. Be sure to read Tech Notes below!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eCup Installer\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eDriver Handle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eRedesigned\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCup Installer \u003c\/strong\u003e\u003cbr\u003eUsing a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Driver Handle\u003c\/strong\u003e\u003cbr\u003eI recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for most applications and a 14\" handle (\u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e) for deep set inner pinion, rear hub and transmission bearing cups.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e Redesigned\u003c\/strong\u003e\u003cbr\u003eAs of May 1, 2011, QT1812 was redesigned to fit more applications. The current QT1812 replaces our previous QT1812 and QT1815 tools. The new QT1812 Installer is made to install all these Timken® Taper Bearing Cup numbers: 02820, 25821, HM88510, and HM88610. QT1812 Installers sold before that date only work on 02820, 25821, and HM88510.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eTransfer Case Rear Output Shaft Front Bearing Applications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e Bronco Dana 20 Transfer Case: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F100 with 3 speed transmission and Dana 20 Transfer Case 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F100 with 4 speed transmission and single speed Dana 21 Transfer Case\u003cbr\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e All Scout with Dana 20 Transfer Case\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e All 1972, 1973\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e All models with manual transmissions 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #993366;\"\u003e\u003cstrong\u003eDana Axle Models 25, 27, 30, 44, 50, 53\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e 1942 to Present\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #333300;\"\u003e\u003cstrong\u003eHeavy-Duty Outer Pinion Bearing Cup Applications\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDana Axle:\u003c\/strong\u003e Models 60, 61 and 70 1954-present. These axle models are found in many heavy 1\/2 ton, 3\/4 ton, and 1 ton front and rear axles used by Chevy\/GMC, Dodge, Ford, IHC, and Jeep. The Dana 70 was also used by Dodge and International as a front axle on 1-1\/2 ton trucks. \u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e 1500HD \u0026amp; 2500 with 14 bolt 9.5\" Ring Gear 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #800080;\"\u003e\u003cstrong\u003eFront Outer Pinion Bearing Cup Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e K2500 \u0026amp; K3500 9.25\" Ring Gear IFS Axle 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #993300;\"\u003eFront Inner Pinion Bearing Applications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAMC:\u003c\/strong\u003e Eagle\u003cbr\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e 1500 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F250 with 4600 lb. Dana Model 50 Twin Traction Beam IFS Axle 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F250 All 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F350 with Dana Model 50 Twin Traction Beam IFS Axle 1980, 1981, 1982, 1983, 1984 \u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e Bronco, F-150 Model 44 IFS Axle 1992.5, 1993, 1994, 1995, 1996\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F250, F350 Single Rear Wheel Dana Model 50 Monobeam Axle 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e All CJ, TJ, WJ, XJ, YJ, ZJ with Model 30 Front Axles 1972-up\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative;\"\u003e\u003ciframe width=\"320\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" height=\"240\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656052056141,"sku":"1812","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1812-clean-1280__13790.1723838131.1280.1280.jpg?v=1742473588"},{"product_id":"1805-qt1805-bearing-cup-installer-3-1-2-approximate-outside-diameter","title":"QT1805 Bearing Cup Installer 3-1\/2\" Approximate Outside Diameter","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1805 3-1\/2\" \u003c\/strong\u003e\u003cstrong\u003eWheel and Pinion Bearing Cup Installer \u003c\/strong\u003eis used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, International, and Jeep 3\/4 and 1 ton trucks from 1954 to current. Use QT1805 for \u003ca href=\"\/products\/50406-qu50406-timken-inner-pinion-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50406\u003c\/a\u003e, \u003ca href=\"\/products\/50570-qu50570-timken-inner-pinion-bearing-cup-for-1968-5-2000-dodge-rear-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50570\u003c\/a\u003e, \u003ca href=\"\/products\/50606-qu50606-timken-inner-pinion-bearing-cup-for-2000-2010-dodge-9-25r\" rel=\"noopener\" target=\"_blank\"\u003eQU50606\u003c\/a\u003e, (inner pinion), and \u003ca href=\"\/products\/50568-qu50568-timken-tapered-inner-wheel-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50568\u003c\/a\u003e (wheel bearing) bearing cups. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5\/8\" tip. Outside diameter is approximately 3.5\". USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eSave Time\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eHandle Size\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eTimken\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSave Time \u003c\/strong\u003e\u003cbr\u003eUsing a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Handle Size\u003c\/strong\u003e\u003cbr\u003eI recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" rel=\"noopener\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" rel=\"noopener\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for most applications and a 14\" handle (\u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" rel=\"noopener\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" rel=\"noopener\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e) for deep set inner pinion, rear hub and transmission bearing cups.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Timken\u003c\/strong\u003e\u003cbr\u003eQT1805 Installer is made to install all these Timken® Taper Bearing Cup numbers: 362A, HM803110, M804010, and NP912904.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eUse QT1805 Cup Installer for These 4x4 Front Inner Wheel Bearing Cup Applications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eK20, K25, 3\/4 Ton (External 6 bolt hub or drive flange): 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1977.5\u003cbr\u003eK20, K25, and K2500 3\/4 ton Pickup 1977.5, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord\u003c\/strong\u003e:\u003cbr\u003eF250 Heavy Duty Models (External 6 bolt hub or drive flange): 1959, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, early 1977\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e:\u003cbr\u003e(External 6 bolt hub or drive flange): 3\/4 ton J4800, J20 1974, 1975, 1976, 1977\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative;\"\u003e\u003ciframe height=\"240\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" width=\"320\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656072667213,"sku":"1805","price":49.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1805_clean_1280__83897.1723837954.1280.1280.jpg?v=1778825904"},{"product_id":"1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip","title":"QT1101 1\" X 14\" Driver Handle for Installers and Removers. 5\/8\" Tip","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1101 14\" Standard Duty Installer Driver Handle\u003c\/strong\u003e with knurled hand grip are used with \u003ca rel=\"noopener\" href=\"\/collections\/wheel-bearing-and-hub-tools\" target=\"_blank\"\u003e\u003cspan\u003eQT15XX\u003c\/span\u003e \u003c\/a\u003eseries Seal Installers and \u003ca rel=\"noopener\" href=\"\/collections\/bearing-cup-installers\" target=\"_blank\"\u003e\u003cspan\u003eQT18XX\u003c\/span\u003e \u003c\/a\u003eseries Bearing Cup Installers with 5\/8'\" center holes. 1\" diameter x 14\" usable length for deep seated seals and bearings. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eInstallers with 5\/8” Center Hole\u003c\/strong\u003e\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallers With 5\/8” Center Hole \u003c\/strong\u003e\u003cbr\u003eMade for installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003cspan style=\"color: #333333;\"\u003eQT1101\u003c\/span\u003e) and 1-1\/4\" diameter for professional use (\u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656078270541,"sku":"1101","price":42.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1101_1600__60448_29744__44278.1708621800.1280.1280.png?v=1742473932"},{"product_id":"1802-qt1802-bearing-cup-installer-2-7-8-approximate-outside-diameter","title":"QT1802 Bearing Cup Installer 2-7\/8\" Approximate Outside Diameter","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e QT1802 Bearing Cup Installer \u003c\/strong\u003eis specifically machined to fit QU10142, QU10145, QU50447, QU50629, and QU50653 bearing cups commonly used in axle, transmission and wheel applications. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5\/8\" tip. Made in Montana, U.S.A.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUsing Installer\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eAvailable Handles\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"#note3\"\u003eCompatible with Timken\u003c\/a\u003e\u003c\/strong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUsing Installer\u003c\/strong\u003e\u003cbr\u003e Using a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools. See \u003ca href=\"#video\"\u003eVideo\u003c\/a\u003e below.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAvailable Handles\u003c\/strong\u003e\u003cbr\u003e I recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for most applications and a 14\" handle (\u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e) for deep set inner pinion, rear hub and transmission bearing cups.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCompatible with Timken Numbers\u003c\/strong\u003e\u003cbr\u003e QT1802 is compatible with these Timken or industry standard bearing cups: LM102910, LM102910P, LM501310, LM501310P, and LM501314\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e \u003cspan style=\"color: #ff6600\"\u003eUse QT1802 Cup Installer for These Transmission Countershaft Front Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll with NV4500 5 Speed Manual Transmission (MW3, MT8 codes): 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e:\u003cbr\u003e All Ram 2500, Ram 3500 with NV4500 and NV4500HD 5 Speed Manual Transmission: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff00ff\"\u003eUse QT1802 Cup Installer for These Front Inner Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eIHC\u003c\/strong\u003e:\u003cbr\u003eScout: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e:\u003cbr\u003eCJ5, CJ6, CJ, CJ7, CJ8: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e All Jeepster Commando and Scrambler \u003cbr\u003e J Series Light Duty: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #008000\"\u003eUse QT1802 Cup Installer for These Front Outer Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e: \u003cbr\u003e Full Size Blazer\/ Jimmy and Suburban: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e 1\/2 Ton K10\/15\/K1500\/V1500: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003e 3\/4 Ton K20\/25\/2500\/V2500: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e: \u003cbr\u003e Bronco: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e F100, F150: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e F250 Model 44 Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003e W100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003e W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e W250 (Gas): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC\u003c\/strong\u003e: \u003cbr\u003e Scout: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e: \u003cbr\u003e CJ5, CJ6, CJ7, CJ8: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e All Jeepster Commando and Scrambler \u003cbr\u003e J-Series Full Size Cherokee, Wagoneer, Pickup, FC150: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eToyota\u003c\/strong\u003e:\u003cbr\u003eLandcruiser, 4 Runner and Pickup: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff\"\u003eUse QT1802 Cup Installer for These Rear Outer Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eToyota:\u003c\/strong\u003e\u003cbr\u003e Landcruiser with full float rear axle: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 192, 1993, 1994, 1995, 1996, 1997\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative\"\u003e\u003ciframe allowfullscreen=\"\" height=\"240\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" width=\"320\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e \u003cscript src=\"https:\/\/player.vimeo.com\/api\/player.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656081743949,"sku":"1802","price":32.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1802_1_1200_clean__63711_16535__19685.1707821136.1280.1280.jpg?v=1742474029"},{"product_id":"1818-qt1818-taper-bearing-cup-installer","title":"QT1818 Taper Bearing Cup Installer","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1818 Taper Bearing Cup Installer\u003c\/strong\u003e for installing \u003ca href=\"\/products\/50535-qu50535-dana-25-dana-44-inner-timken-pinion-bearing-cup\" target=\"_blank\"\u003eQU50535\u003c\/a\u003e (Inner Pinion Bearing Cup), and \u003ca href=\"\/products\/50558-qu50558-timken-pinion-bearing-cup-for-corporate-rear-axles\" target=\"_blank\"\u003eQU50558\u003c\/a\u003e (Outer Pinion Bearing Cup), \u003ca href=\"\/products\/50346-tk50346-torque-king-idler-shaft-tapered-roller-bearing-cup\" target=\"_blank\"\u003eTK50346\u003c\/a\u003e (NP200, NP201, NP205 Transfer Cases) bearing cups in many 4x4 applications. QT1818 is also used to install \u003ca href=\"\/products\/52364-qu52364-timken-front-inner-wheel-bearing-cup-for-mahindra-roxor-and-early-jeep-trucks\"\u003eQU52364\u003c\/a\u003e Roxor Front Inner Wheel Bearing Cups. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5\/8\" tip. USA Made.\u003c\/p\u003e\n\u003cp\u003eNote: QT1818 replaces QT1830.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eInstalls without Damage\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eTool Handles\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstalls without Damage\u003c\/strong\u003e\u003cbr\u003eUsing a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e \u003cstrong\u003eTool Handles\u003c\/strong\u003e\u003cbr\u003eI recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for most applications and a 14\" handle (\u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e) for deep set inner pinion, rear hub and transmission bearing cups.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #ff00ff;\"\u003e\u003cstrong\u003eUse QT1818 Cup Installer for These Inner Pinion Bearing Cup Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC: \u003cbr\u003e\u003c\/strong\u003eHO33 Rear Axle: 1953, 1954, 1955, 1956\u003cbr\u003eHO35: 1961, 1962, 1963, 1964 \u003cbr\u003eHO35 8-7\/8\" Rear Axle: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDana-Spicer:\u003c\/strong\u003e\u003cbr\u003eAll Model 44: 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eJeep 1956-current\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord: \u003c\/strong\u003e\u003cbr\u003e9\" Heavy Duty: 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e:\u003cbr\u003eAll with Dana 25 Front Axle: 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eDana 25 Rear Axle: 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #800080;\"\u003e\u003cstrong\u003eUse QT1818 Cup Installer for These Rear Outer Pinion Bearing Cup Applications\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eFord:\u003c\/strong\u003e\u003cbr\u003e1\/2 and 3\/4 Ton Rockwell A150 Axles: 1953, 1954, 1955\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #3366ff;\"\u003e\u003cstrong\u003eUse QT1818 Cup Installer for These Transfer Case Bearing Cup Applications\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eNew Process Gear:\u003c\/strong\u003e\u003cbr\u003eNP200 Idler Gear\u003cbr\u003eNP201 Idler Gear\u003cbr\u003eNP205 Idler Gear 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #003300;\"\u003eUse QT1818 for These Front Inner Wheel Bearing Cup Applications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMahindra:\u003c\/strong\u003e\u003cbr\u003eRoxor: 2018, 2019, 2020, 2021, 2022, 2023\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative;\"\u003e\u003ciframe height=\"240\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" width=\"320\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656085348429,"sku":"1818","price":31.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1818-clean-1280__46505.1723838385.1280.1280.jpg?v=1742474096"},{"product_id":"1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle","title":"QT1116 1-1\/4\" x 8\" Pro Duty Installer Driver Handle","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1116 8\" Pro Duty Installer Driver Handle\u003c\/strong\u003e with knurled hand grip are used with \u003ca href=\"\/collections\/wheel-bearing-and-hub-tools\" target=\"_blank\" rel=\"noopener\"\u003eQT15XX \u003c\/a\u003eseries Seal Installers and \u003ca href=\"\/collections\/bearing-cup-installers\" target=\"_blank\" rel=\"noopener\"\u003eQT18XX \u003c\/a\u003eseries Bearing Cup Installers with 5\/8'\" center holes. Black Oxide finish. 1.25\" diameter x 8\" usable length for general purpose use. Black Oxide Finish. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eFor 5\/8” Center Hole\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFor 5\/8” Center Hole\u003c\/strong\u003e\u003cbr\u003eMade for installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e) and 1-1\/4” diameter for professional use (QT1116, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656098881613,"sku":"1116","price":39.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1116_clean__59047_29750__09256.1708621816.1280.1280.png?v=1742474250"},{"product_id":"1504-qt1504-dana-30-dana-44-and-gm-10-bolt-front-wheel-seal-installer","title":"QT1504 Dana 30, Dana 44 and GM 10 Bolt Front Wheel Seal Installer","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-md-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eQT1504 Dana 30, Dana 44 and GM 10 Bolt Front Wheel Seal Installer \u003c\/strong\u003e is specifically made to install \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eand \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003einner wheel grease seals to the correct depth without damaging the seal. Applications include many 1960 to early 1990s Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s up to 3\/4 ton class. A relief groove in the installer allows adequate clearance for the outer seal lip on \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091\u003c\/a\u003e, thereby preventing one of the most common causes of premature seal failure. Aluminum Installer is Made in U.S.A. by us here in Roberts, Montana.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eLubricate\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eDriver Handles\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eRedesign\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubricate\u003c\/strong\u003e\u003cbr\u003eAfter the seal is installed, lubricate the seal lip with clean wheel bearing grease.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDriver Handles\u003c\/strong\u003e\u003cbr\u003eQT1504 has a 5\/8\" center hole for attaching Installer to \u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e, or \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119 \u003c\/a\u003eDriver Handles.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e \u003cstrong\u003eRedesign\u003c\/strong\u003e\u003cbr\u003eQT1504 was redesigned in June of 2013 to replace QT1507 and the previous version of QT1504. QT1504 can now be used to install both \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003esingle lip inner wheel grease seal without a garter spring and \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003edouble lip inner wheel grease with a garter spring. \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003ewas used in 1960 to early 1970's hubs with shallow depth seal bores. \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eis used in disc brake hubs with deep seal bores. Although the two seals share the same ID and OD they are not interchangeable due to performance and depth differences.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(Partial List)\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003cbr\u003e\u003c\/strong\u003eBlazer, Jimmy, K10, K15 pickups and Suburbans with Dana 44 Front Axles: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK20, K25 pickups and Suburbans with Dana 44 Front Axles: 1977.5, 1978, 1979, 1980, 1981\u003cbr\u003eBlazer, Jimmy, K10, K15, K1500, K20, K25, K2500 pickups and Suburbans with GM 10 Bolt Front Axles: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100 1\/2 ton 4x4 trucks with Dana 44 Drum Brake front axles: 1969, 1970, 1971\u003cbr\u003eRamcharger, Trailduster, W150, and W250 4x4s with Dana 44 Front Axles: 1980, 1981, 1982, 1983, 1984\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF150 with Dana 44 Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF250 with Dana 44 Front Axles up to Serial Number F70000: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1969.5\u003cbr\u003eF250 with Dana 44HD Front Axles: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eFord F150 and Bronco with Dana 44 Front Axles up to Serial Number F70000: 1966, 1967, 1968, 1969, 1969.5\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656118476877,"sku":"1504","price":26.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1504_1600-1__47684.1721681828.1280.1280.png?v=1742474734"},{"product_id":"1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle","title":"QT1119 1-1\/4\" x 14\" Pro Duty Installer Driver Handle","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1119 14\" Pro Duty Installer Driver Handle\u003c\/strong\u003e with knurled hand grip are used with \u003ca rel=\"noopener\" href=\"\/collections\/wheel-bearing-and-hub-tools\" target=\"_blank\"\u003eQT15XX \u003c\/a\u003eseries Seal Installers and \u003ca rel=\"noopener\" href=\"\/collections\/bearing-cup-installers\" target=\"_blank\"\u003eQT18XX \u003c\/a\u003eseries Bearing Cup Installers with 5\/8'\" center holes. 1.25\" diameter x 14\" usable length for deep seated seals and bearings. Made in Montana, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eInstallers with 5\/8” Center Hole Made for insta\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallers with 5\/8” Center Hole\u003c\/strong\u003e\u003cbr\u003eMade for installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e) and 1-1\/4\" diameter for professional use (\u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e, QT1119).\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656122081357,"sku":"1119","price":47.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1119_1_clean-cropped-webp__70723_29782__81086.1708621880.1280.1280.jpg?v=1742474911"},{"product_id":"1115-qt1115-dana-44-differential-side-bearing-installer","title":"QT1115 Dana 44 Differential Side Bearing Installer","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1115 Dana 44 Differential Side Bearing Installer \u003c\/strong\u003efor all Dana-Spicer Model 44 front or rear axles. QT1115 features a raised internal ring that contacts the bearing inner face so you can press or drive your diff bearings on without damaging the cage. 5\/8\" center hole accepts our \u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100 \u003c\/a\u003eor \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116 \u003c\/a\u003eDriver Handles or any other driver with a 5\/8\" pilot. Made in Montana, U.S.A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eTool Benefits\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool Benefits\u003c\/strong\u003e\u003cbr\u003eOver the years, I have seen a lot of diff bearings installed with makeshift methods that failed prematurely. The soft cage and both the hardened rollers and races are easily damaged from rough handling. Bearings are kind of like eggs, they can take tremendous pressures in certain directions, but are easily wrecked by applying impact force in the wrong place. The big difference is a bearing that fails can cause an accident that injures or kills you, while crushing an egg just means you get some shell bits in your omelette! With the QT1115, your installation force is applied entirely to the inner race face, thereby preventing you from harming the cage, races, or rollers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eMost 1965-1999 Dana 44 Front or Rear Axles\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656123752525,"sku":"1115","price":30.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1115__84403_7523__20671.1707822451.1280.1280.jpg?v=1742474957"},{"product_id":"636-tmf77usb-1977-ford-factory-shop-manual-on-usb-for-truck","title":"TMF77USB 1977 Ford Factory Shop Manual on USB for Truck","description":"\u003cp\u003e\u003cstrong\u003eTMF77USB 1977 Ford Complete Factory Shop Manual on USB for Truck Body, Chassis, and Electrical Service\u003c\/strong\u003e Our Complete Ford Factory Shop Manuals on USB are your source for complete service, maintenance, and overhaul information for your 1977 Ford truck. Our Ford authorized reproduction Factory Shop Manuals cover almost everything you may need to service on your your 1977 Ford from alternator testing to wheel bearing replacement. Ford Factory Manuals include hundreds of black and white illustrations, service procedures, torque specifications, and troubleshooting charts. 1977 Ford Factory Shop Manuals include coverage of axles, body, brakes, clutch, drive shaft, engine, electrical, exhaust, frame, transfer case, transmission, steering, and suspension. All pages are available to print out as an instant reference while working in the garage, away from the computer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Ford Motor Company did not include wiring diagrams in its shop manuals, and therefore are not included on this USB.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTMF77USB supersedes TMF77CD 1977 Ford Complete Factory Shop Manual on CD\u003c\/em\u003e\u003c\/p\u003e","brand":"OEM Shop Manual","offers":[{"title":"Default Title","offer_id":41656147837005,"sku":"636","price":44.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/TMF77USB-1.png?v=1775109129"},{"product_id":"637-tmf76usb-1976-ford-factory-shop-manual-on-usb-for-truck","title":"TMF76USB 1976 Ford Factory Shop Manual on USB for Truck","description":"\u003cp\u003e\u003cstrong\u003eTMF76USB 1976 Ford Complete Factory Shop Manual on USB for Truck Body, Chassis, and Electrical Service\u003c\/strong\u003e Our Complete Ford Factory Shop Manuals on USB are your source for complete service, maintenance, and overhaul information for your 1976 Ford truck. Our Ford authorized reproduction Factory Shop Manuals cover almost everything you may need to service on your your 1976 Ford from alternator testing to wheel bearing replacement. Ford Factory Manuals include hundreds of black and white illustrations, service procedures, torque specifications, and troubleshooting charts. 1976 Ford Factory Shop Manuals include coverage of axles, body, brakes, clutch, drive shaft, engine, electrical, exhaust, frame, transfer case, transmission, steering, and suspension. All pages are available to print out as an instant reference while working in the garage, away from the computer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Ford Motor Company did not include wiring diagrams in its shop manuals, and therefore are not included on this USB.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTMF76USB supersedes TMF76CD 1976 Ford Complete Factory Shop Manual on CD\u003c\/em\u003e\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656148525133,"sku":"637","price":44.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/TMF76USB-2.png?v=1775109118"},{"product_id":"1075-qt1075-1-2-drive-ball-joint-adjuster-sleeve-socket-for-dana-30-dana-44-gm-10-bolt-roxor","title":"QT1075 1\/2\" Drive Ball Joint Adjuster Sleeve Socket for Dana 30, Dana 44, GM 10 Bolt, Roxor","description":"\u003cp\u003e\u003cstrong\u003eQT1075 1\/2\" Drive Ball Joint Adjuster Sleeve Socket\u003c\/strong\u003e for a host of domestic 4x4s from 1969 to 1993. QT1075 also fits 2018 and newer Mahindra Roxor 4x4s. Chevy, Dodge, Ford, GMC, International, Jeep all used the \u003ca href=\"\/products\/40187-qu40187-original-equipment-ball-joint-set-for-4x4-front-axles\" target=\"_blank\"\u003eQU40187\u003c\/a\u003e Ball joints on just about every 4x4 they sold with Dana 30, Dana 44, or GM 10 Bolt solid beam axles with serviceable wheel bearings. The USA Made 1\/2\" Drive design of the QT1075 attaches directly to your ratchet or breaker bar making it the easiest to use and most effective Ball Joint Spanner Socket on the market. Cheaper, competitive sockets with a hex body means you have to add a hex socket to drive the ball joint socket. Sounds OK, but the added link makes it very difficult to put direct downward pressure on the socket as you try to turn it. When servicing your vintage 4x4, use the same 1\/2\" Drive socket design Dan the Gear Man has relied upon for over 45 years! Not for Impact Use.\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eUpper Ball Joint Stud\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eLocation\u003c\/strong\u003e\u003c\/a\u003eng\u0026gt;Location The Ball Joints are pressed into the steerin\u003ca href=\"#note3\"\u003e\u003cstrong\u003eQU40187 Includes\u003c\/strong\u003e\u003c\/a\u003eint Set Inc\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eThreaded Adjuster\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed Mor\u003ca href=\"#note4\"\u003e\u003cstrong\u003eThreaded Adjuster\u003c\/strong\u003e\u003c\/a\u003epecific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUpper Ball Joint Stud\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eLocation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eQU40187 Includes\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Upper Ball Joint Stud\u003c\/strong\u003e\u003cbr\u003eFor removal, the upper ball joint stud needs to be driven down to free it BEFORE you try to loosen the adjuster with QT1075 special 1\/2\" drive spanner socket.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLocation\u003c\/strong\u003e\u003cbr\u003eThe Ball Joints are pressed into the steering knuckle so the knuckle needs to be removed from the vehicle in order to replace the Ball Joints.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eQU40187 Includes\u003c\/strong\u003e\u003cbr\u003eEach \u003ca href=\"\/products\/40187-qu40187-original-equipment-ball-joint-set-for-4x4-front-axles\" target=\"_blank\"\u003eQU40187\u003c\/a\u003e Ball Joint Set Includes 1 Each:\u003cbr\u003e Upper Ball Joint, Upper Ball Joint Threaded Adjuster, Upper Ball Joint Nut, Cotter Key for Upper Ball Joint\u003cbr\u003e Lower Ball Joint, Lower Ball Joint Lock Nut, Lower Ball Joint Snap Ring\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThreaded Adjuster\u003c\/strong\u003e\u003cbr\u003eThe Threaded Adjuster is installed in the Axle Yoke AFTER the Lower Ball Joint Nut is tightened. Apply \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" target=\"_blank\"\u003eS9975\u003c\/a\u003e or \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" target=\"_blank\"\u003eS81343\u003c\/a\u003e Anti-Seize Compound to the Adjuster Threads. Torque the Adjuster to 50 lb.-ft. with QT1075 special 1\/2\" drive spanner socket.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(partial listing)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll K5 Blazer, Jimmy, K10, K15, K1500, V1500, K20, K25, K2500, V2500 with Dana 44 or GM 10 Bolt: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eAll Ramcharger, Trailduster, W100, W150, W200, W250 with open knuckle Dana 44 Axles: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco, F-100, F150: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF-250 with open knuckle Dana 44 Axles: 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1100, 1200 with Dana 44 open knuckle front axles: 1971, 1972, 1973, 1974, 1975\u003cbr\u003eScout and Scout Based Vehicles: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ-5, CJ-6, CJ-7, Scrambler: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003cbr\u003eJ-Series Full Size Cherokee, Cherokee Chief, Grand Wagoneer, 1\/2 ton \u0026amp; 3\/4 ton Trucks, Wagoneer: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMahindra:\u003c\/strong\u003e\u003cbr\u003eRoxor 4x4: 2018, 2019, 2020, 2021, 2022, 2023\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656222285901,"sku":"1075","price":94.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/clean_1__65791.1721678534.1280.1280.png?v=1742477506"},{"product_id":"1200-qt1200i-tie-rod-separator","title":"QT1200i Tie Rod Separator","description":"\u003cp\u003e\u003cstrong\u003eQT1200 Tie Rod Separator\u003c\/strong\u003e separates most tie rods, drag links, \u0026amp; track bars without damaging the stud or seal with this rugged puller. Way better than a \"pickle fork\", A real time saver! Made in Taiwan. \u003cstrong\u003eNOT FOR IMPACT USE!\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWill Not Damage \u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eLate 1970’s F-250 and F-350\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#safety\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWill Not Damage \u003c\/strong\u003e\u003cbr\u003e Ball Joint and King Pin service almost always includes separating the tie rods and\/or drag link from the steering knuckle. Traditionally, this was done with a wedge shaped \"pickle fork\" type tool that is driven between the steering arm and linkage end. Invariably, these tools tear or destroy the seal on the tie rod or drag link, and as often as not, damage the tie rod itself. On the other hand, as long as there is room to engage the puller jaws on the steering arm, our QT1200 will not damage either the seal or linkage end because the force is applied directly to the tip of the linkage stud. The long and short of the story is this tool will save you money in the long run on the parts you won't have to buy, plus you won't be driving around with steering linkage screwed up by a pickle fork!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Late 1970's F-250 and F-350\u003c\/strong\u003e\u003cbr\u003eThere are a few vehicle models with metal covered compression seals which will call for some ingenuity to use this tool. Included would be some late 1970's F-250 and F-350 4x4's, some of the full size Jeep J-series models, and 1998-1999 Dodge Ram 2500 and 3500 4x4s. On these models, you will need to force the jaw tips between the steering arm and steel seal plate and hold them in place as you tighten the press screw (I use a welding clamp to hold the jaws together). Yes, this will distort the plate, but it is still going to be a lot less damaging than using a pickle fork.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"safety\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eSafety Notes:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cspan style=\"color: #ff0000\"\u003eUsing any puller can be dangerous due to force applied to the tool and parts. \u003cstrong\u003eWearing eye protection is a must.\u003c\/strong\u003e You also need to be aware that both the tool and steering linkage may go flying when the linkage suddenly separates from the steering arm. You can attach a piece of wire between the frame and linkage to keep the linkage from dropping. As for the tool, it is usually not feasible to tie something to it, but keeping your body and face well clear should keep you out of the way as the tool drops to the floor.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eCan be used on auto and truck steering linkages with flexible seals up through 1-1\/2 ton models. \u003cbr\u003e This tool may be difficult but not impossible to use on some vehicles with stacked disc type seals utilizing a steel outer protector. Examples would be 1999, 2000 Dodge Ram 2500 and 3500 trucks and some late 1970's Ford F-250 and F-350 4x4's\u003cbr\u003eF-250 Dana 50IFS: 1995, 1996, 1997\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656247255117,"sku":"1200","price":74.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1200i_1_1200_clean__86672_15807__55378.1707825423.1280.1280.jpg?v=1779173791"},{"product_id":"1229-qt1229-hd-differential-bearing-puller","title":"QT1229 HD Differential Bearing Puller","description":"\u003cp\u003e\u003cstrong\u003eQT1229 HD Differential Bearing Puller\u003c\/strong\u003e for most 3\/4 and 1 ton front or rear axles.\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656273502285,"sku":"1229","price":1302.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1229clean__91523_7564__64841.1707826803.1280.1280.jpg?v=1778722604"},{"product_id":"4779-tk4779-3-4-ton-front-wheel-bearing-seal-kit-chevy-ford-gmc-jeep","title":"TK4779 3\/4 Ton Front Wheel Bearing \u0026 Seal Kit Chevy, Ford, GMC, Jeep","description":"\u003cp\u003e\u003cstrong\u003e TK4779 Torque King® 3\/4 Ton Front Wheel Bearing and Seal Kit featuring Timken Bearings for Chevy, Ford, GMC, and Jeep\u003c\/strong\u003e fits 1961-1977.5 Ford F250 Dana 44HD 3500 lb. and 1974-1977.5 Dana 60 3800 lb. 4x4 Front Axles with external mount lockout hubs or drive flanges. TK4779 additionally fits 1974-1977.5 Jeep J20 3\/4 ton Dana 44 with External Mount Wheel Hub as well as 1960 to 1977.5 Chevy and GMC 3\/4 ton 4x4 Suburbans and trucks. Do the job right the first time with premium quality parts!\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/4708-tk4708-master-3-4-ton-4x4-front-wheel-bearing-kit-with-tools-1960-1977\" target=\"_blank\"\u003eTK4708\u003c\/a\u003e Master Kit with Tools\u003cbr\u003eAlso See: \u003ca href=\"\/products\/134899-tk4899-1960-1977-5-3-4-ton-front-wheel-bearing-only-kit-for-dana-44\" target=\"_blank\"\u003eTK4899\u003c\/a\u003e Bearings Only Kit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Includes\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003e1961-1975 Ford Dana 44\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003e1977 Chevy, Ford, GMC, and Jeep\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Tools for All Makes\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note5\"\u003eMatching Parts for Jeep\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note6\"\u003eMatching Parts for Ford\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note7\"\u003eMatching Parts for Chevy\/GMC\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Includes\u003c\/strong\u003e\u003cbr\u003e TK4779 Kit includes these parts: \u003cbr\u003e(2) \u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Timken® Outer Wheel Bearing Cups\u003cbr\u003e(2) \u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Timken® Outer Wheel Bearings \u003cbr\u003e(2) \u003ca href=\"\/products\/50568-qu50568-timken-tapered-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50568\u003c\/a\u003e Timken® Inner Wheel Bearing Cups \u003cbr\u003e(2) \u003ca href=\"\/products\/50569-qu50569-timken-tapered-inner-wheel-roller-bearing\" target=\"_blank\"\u003eQU50569\u003c\/a\u003e Timken® Inner Wheel Bearings\u003cbr\u003e(2) \u003ca href=\"\/products\/50101-qu50101-premium-oe-type-front-inner-wheel-seal\" target=\"_blank\"\u003eQU50101\u003c\/a\u003e Premium Front Wheel Seals\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1961-1975 Ford Dana 44\u003c\/strong\u003e\u003cbr\u003eFor the 1961-1975 model years, Ford used both standard 3300 pound rated and Heavy-Duty Dana 44HD 3500 pound rated closed knuckle front axles. TK4779 ONLY fits the Dana 44HD axle for these years. The Dana 44HD can easily be identified by the following features:\u003cbr\u003e6 Bolt External Mount Hub Lock or Drive Flange (Bolt Size is 3\/8\")\u003cbr\u003e12 Bolt Knuckle Ball Seals\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1977 Chevy, Ford, GMC, and Jeep\u003c\/strong\u003e\u003cbr\u003e1977 was a transition year for the type of front wheel hubs used on 3\/4 ton Ford, General Motors and Jeep 4x4s. TK4779 fits the early production hubs which have 6 Bolt External Mount Hub Locks or Drive Flanges (Bolt Size is 3\/8\"). Later production 1977 axles will have internally splined front wheel hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Tools for All Makes\u003c\/strong\u003e\u003cbr\u003eSpindle Nut Socket, order \u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e, \u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i\u003c\/a\u003e, or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/1802-qt1802-bearing-cup-installer-2-7-8-approximate-outside-diameter\" target=\"_blank\"\u003eQT1802\u003c\/a\u003e Outer Wheel Bearing Cup Installer, \u003cbr\u003e\u003ca href=\"\/products\/1805-qt1805-bearing-cup-installer-3-1-2-approximate-outside-diameter\" target=\"_blank\"\u003eQT1805\u003c\/a\u003e Inner Wheel Bearing Cup Installer \u003cbr\u003e\u003ca href=\"\/products\/1506-qt1506-front-wheel-seal-installer-for-dana-44-dana-60\" target=\"_blank\"\u003eQT1506\u003c\/a\u003e Front Wheel Seal Installer \u003cbr\u003e\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e Driver Handle\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts For Jeep\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Outer Paper Gasket for Lockout Hub \u003cbr\u003e\u003ca href=\"\/products\/40323-qu40323-3-4-ton-dana-44-front-spindle-assembly\" target=\"_blank\"\u003eQU40323\u003c\/a\u003e Spindle, 1974-1977.5 Jeep J20\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Sockets\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts For Ford\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Inner Metal Gasket for Factory Spicer Hub\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Fiber Gasket for Drive Flanges and Lockout Hubs \u003cbr\u003e\u003ca href=\"\/products\/40332-qu40332-front-spindle-kit-for-1976-1977-5-ford-f250-dana-44\" target=\"_blank\"\u003eQU40332\u003c\/a\u003e Spindle, 1976-1977.5 Ford F250\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Sockets\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for Chevy\/GMC\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Inner Metal Gasket for Factory Spicer Hub\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Outer Paper Gasket for Factory Spicer Hub\u003cbr\u003e\u003ca href=\"\/products\/40323-qu40323-3-4-ton-dana-44-front-spindle-assembly\" target=\"_blank\"\u003eQU40323\u003c\/a\u003e Spindle, 1971-1977.5 GM K20, K25\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Sockets\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003e K20, K25, K2500: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e F-250 with the Dana 44HD Closed Knuckle Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e F-250 with Dana 44 Open Knuckle Front Axle: 1976, 1977, 1977.5\u003cbr\u003e F-250 Crew Cab with Closed Knuckle Dana 60 Front Axle: 1973, 1974, 1975\u003cbr\u003e F-250 Crew Cab with Open Knuckle Dana 60 Front Axle: 1976, 1977, 1977.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e J20: 1974, 1975, 1976, 1977, 1977.5\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656277532749,"sku":"4779","price":194.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk4779_1600.png?v=1767913279"},{"product_id":"4834-ts4834-dana-44-depth-control-inner-axle-seal-tool-set","title":"TS4834 Dana 44 Depth Control Inner Axle Seal Tool Set","description":"\u003cp\u003e\u003cstrong\u003eTS4834 Dana 44 Depth Control Inner Axle Seal Tool Set\u003c\/strong\u003e Quickly and easily installs \u003ca href=\"\/products\/40159-qu40159-inner-axle-shaft-seal\" target=\"_blank\"\u003eQU40159\u003c\/a\u003e Inner Axle Seal in vintage Chevy, Dodge, GMC, and Jeep 4x4s with open knuckle Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals to the exact depth and without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Kit Includes \u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Thrust Plate, \u003ca href=\"\/products\/1136-qt1136-dana-60-fixed-depth-front-inner-axle-shaft-seal-installer\" target=\"_blank\"\u003eQT1136\u003c\/a\u003e Installer, and \u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Press Screw. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See \u003ca href=\"\/products\/664834-qk4834-dana-44-inner-axle-seal-kit-with-depth-control-tool-set\" target=\"_blank\"\u003eQK4834\u003c\/a\u003e Seal and Tool Kit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eRemove\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eInner Axle Seals\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eDepth Stop\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSeals and Tools Must Match\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eSeal Remover Tool Set\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRemove\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace your \u003ca href=\"\/products\/40159-qu40159-inner-axle-shaft-seal\" target=\"_blank\"\u003eQU40159\u003c\/a\u003e inner axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInner Axle Seals\u003c\/strong\u003e\u003cbr\u003eThe inner axle seals used on Chevy, Dodge, Ford, GMC, IHC, and Jeep closed and open knuckle Dana Model 44 Front Axles will vary by year and model.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDepth Stop\u003c\/strong\u003e\u003cbr\u003eTS4834 uses \u003ca href=\"\/products\/1136-qt1136-dana-60-fixed-depth-front-inner-axle-shaft-seal-installer\" target=\"_blank\"\u003eQT1136\u003c\/a\u003e application specific Depth Stop Seal Installer which stop against the Dana 44 axle bore chamfer when \u003ca href=\"\/products\/40159-qu40159-inner-axle-shaft-seal\" target=\"_blank\"\u003eQU40159\u003c\/a\u003e seal is at the correct depth.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeals and Tools Must Match\u003c\/strong\u003e\u003cbr\u003eDue to the way we have to make the tool to function, your Seal Installer and Seal MUST match. \u003ca href=\"\/products\/1136-qt1136-dana-60-fixed-depth-front-inner-axle-shaft-seal-installer\" target=\"_blank\"\u003eQT1136\u003c\/a\u003e Installer will only work with original equipment design, NOK manufactured seals such as our \u003ca href=\"\/products\/40159-qu40159-inner-axle-shaft-seal\" target=\"_blank\"\u003eQU40159\u003c\/a\u003e. \u003cstrong\u003eSeals manufactured by other seal manufacturers WILL NOT WORK WITH THIS INSTALLER!!!!\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeal Remover Tool Set\u003c\/strong\u003e\u003cbr\u003eOnce the axle is disassembled, the old seals can be easily removed with our \u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Seal Remover Tool Set or other suitable tool such as a length of sturdy pipe that will fit inside the axle tube. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eVintage Chevy, Dodge, GMC, and Jeep 4x4's with Open Knuckle Dana 44 Front Axles\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656284774477,"sku":"4834","price":174.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/TS4834_2.png?v=1778722684"},{"product_id":"4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set","title":"TS4871 Dana 44 Inner Fixed Depth Axle Seal Tool Set","description":"\u003cp style=\"text-align: left\"\u003e\u003cstrong\u003eTS4871 Dana 44 Inner Fixed Depth Axle Seal Tool Set\u003c\/strong\u003e Quickly and easily installs \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seal in vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press in your new Inner Axle Seals to the exact depth and without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Kit Includes \u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Thrust Plate, \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e Installer, and \u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Press Screw. USA Made.\u003c\/p\u003e \u003cp style=\"text-align: left\"\u003eAlso See \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Seal and Tool Kit.\u003c\/p\u003e \u003cp style=\"text-align: left\"\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eRemoval\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eTech Note 2\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eDepth Stop\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eSeal\/Tool Match\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eClean\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \n\n\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRemoval\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace your \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e inner axle shaft seals. \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e tyle=\"color: #ff0000\"\u0026gt;\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e \u003cstrong\u003eSeal Variance\u003c\/strong\u003e\u003cbr\u003eThe inner axle seals used on Chevy, Dodge, Ford, GMC, IHC, and Jeep closed and open knuckle Dana Model 44 Front Axles will vary by year and model. Refer to the below to access our  \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e model specific application pages.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDepth Stop\u003c\/strong\u003e\u003cbr\u003eTS4871 uses \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e application specific Depth Stop Seal Installer which has a raised flange on it that will stop against the Dana 44 axle bore face when \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e seal is at the correct depth.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeal\/Tool Match\u003c\/strong\u003e\u003cbr\u003eDue to the way we have to make the tool to function, your Seal Installer and Seal MUST match. \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e Installer will only work with original equipment design, CR manufactured seals such as our \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e. Seals manufactured by other seal manufacturers WILL NOT WORK WITH THIS INSTALLER!!!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eClean\u003c\/strong\u003e\u003cbr\u003eOnce the axle is disassembled, the old seals can be easily removed with our \u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Seal Remover Tool Set or other suitable tool such as a length of sturdy pipe that will fit inside the axle tube. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250: 1967, 1968, 1969\u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972½, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971½, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656289755213,"sku":"4871","price":174.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/ts4871__58209_8619__76559.1707827906.1280.1280.jpg?v=1778720563"},{"product_id":"4872-qk4872-dana-44-axle-seal-kit-with-adjustable-depth-axle-seal-tool-set","title":"QK4872 Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set","description":"\u003cdiv class=\"col-md-8\"\u003e \u003cp\u003e\u003cstrong\u003eQK4872 Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set\u003c\/strong\u003e Quickly and easily installs \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seals in 1950's to 1980's vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See \u003ca href=\"\/products\/994872-ts4872-dana-44-adjustable-depth-inner-axle-seal-tool-set\" target=\"_blank\"\u003eTS4872\u003c\/a\u003e Tool Set only, or See \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e for Fixed Depth Option.\u003c\/p\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMust be Removed\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSee Article\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eAdjustable Depth\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eUse Correct Seals\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eRemoval of Old Seals\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eEarly Dana 44 Axles\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eQK4872 Inner Axle Seal Installation Kit Include:\u003cbr\u003e(2) \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seals\u003cbr\u003e\u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Model 44 Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Model 44 Press Screw Assembly\u003cbr\u003e\u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Model 44 Specific Thrust Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMust be Removed\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace your \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e inner axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSee Article\u003c\/strong\u003e\u003cbr\u003eThe inner axle seals used on Chevy, Dodge, Ford, GMC, IHC, and Jeep closed and open knuckle Dana Model 44 Front Axles will vary by year and model. \u003ca href=\"\/products\/4933-qk4933-dana-44-front-inner-axle-seal-and-install-tool-kit\"\u003eSee Article.\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAdjustable Depth\u003c\/strong\u003e\u003cbr\u003eQK4872 uses \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e application specific adjustable depth installer which allows you to offset the seal to miss a worn spot on the axle shaft. This is a valuable feature, however, YOU have to determine the final depth of the seal. It is unlikely, but possible to seat the seal too deep with \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e installer which can put the seal beyond the machined seal surface of the axle shaft. We also offer \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Seal Installer Set which uses \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e specific Depth Stop Seal Installer which has a raised flange on it that will stop against the axle bore face when the seal is at the correct depth. This is a more fool-proof setup than QK4872, but it is a little more expensive and you can not vary the seal depth to miss a groove worn in the axle shaft.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse Correct Seals\u003c\/strong\u003e\u003cbr\u003eDue to the way we have to make the tool to function, your Seal Installer and Seal MUST match. \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Installer will only work with original equipment design, CR manufactured seals such as our \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e. Seals manufactured by other seal manufacturers WILL NOT WORK WITH THIS INSTALLER!!!!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRemoval of Old Seals\u003c\/strong\u003e\u003cbr\u003eOnce the axle is disassembled, the old seals can be easily removed with our \u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Seal Remover Tool Set or other suitable tool such as a length of sturdy pipe that will fit inside the axle tube. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eEarly Dana 44 Axles\u003c\/strong\u003e\u003cbr\u003eMost closed knuckle and early production Dana 44 axles used a two piece axle seal and guide set that had \u003ca href=\"\/products\/42015-qu42015-inner-front-axle-shaft-seal-for-dana-44-and-dana-60\" target=\"_blank\"\u003eQU42015\u003c\/a\u003e seal and a separate sheet metal guide. \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Seal replaces both parts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250: 1967, 1968, 1969\u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003e\u003c\/strong\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972½, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIHC: \u003cbr\u003e\u003c\/strong\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971½, 1972, 1973, 1974, 1975\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJeep:\u003cbr\u003e\u003c\/strong\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656290082893,"sku":"4872","price":194.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4872_2107_1600__52571_21188__25727.1708622040.1280.1280.png?v=1778718667"},{"product_id":"5500-qt5500-wheel-bearing-packer-with-cover","title":"QT5500 Wheel Bearing Packer With Cover","description":"\u003cp\u003e\u003cstrong\u003eQT5500 Wheel Bearing Packer with Cover\u003c\/strong\u003e takes the mess out of packing wheel bearings, plus it minimizes the chances of getting contaminants mixed with your wheel bearing grease. I have been using mine for many, many years! The QT5500 Bearing Packer does an absolutely beautiful job of forcing grease between the individual bearing rollers. The easiest and most efficient way to repack tapered roller bearings up to 3-47\/64\" maximum width! Includes clear plastic base that will hold up to 1 pound of most greases, lower plate with o-ring seal, a two piece extendable forcing cone, adapters for smaller bearings, and a black plastic cover. Can be refilled using a grease gun attached to the zerk fitting in the center stem (not visible in photo) or by squeezing the contents of a standard 14 oz. grease tube into the base (like a giant tube of toothpaste). USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003cspan\u003e\u003ca href=\"#note1\"\u003e\u003cspan\u003eSave Time\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e \u003cbr\u003e \u003cspan\u003e\u003ca href=\"#note2\"\u003e\u003cspan\u003eClean\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eJust Over 3-3\/4\" Inside Diameter\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eExploded Views\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e \u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSave Time\u003c\/strong\u003e\u003cbr\u003eQT5500 is one of the slickest tools to have on your tool shelf. Not only does it save time, save grease, and do a better, cleaner job compared to hand packing bearings, the QT5500 reduces your exposure to all the chemicals found in modern greases. Did you ever think about the compounds you force into your skin as you push grease between the rollers when hand packing?\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eClean\u003c\/strong\u003e\u003cbr\u003eAfter greasing, clean any grease that might have gotten on the outside of base. Between jobs, keep your QT5500 covered with a clean rag. To refill, thread the outer part of the forcing cone onto the lower plate stem. Pull up with a rocking motion to break the vacuum. Leave the lower plate in the base in if you are refilling with a grease gun or remove the plate to fill from a tube or bulk grease source. To help you remove the lower plate, it is equipped with an assist spring that will push against the base floor when your grease is all used up.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eJust Over 3-3\/4” Inside Diameter \u003c\/strong\u003e\u003cbr\u003e QT5500 has a inside diameter of just over 3-3\/4\" so it will work on almost all 1 ton and smaller truck 4x4 outer wheel bearings, front inner wheel bearings and single rear wheel inner bearings except 1985-1997 Fords with the 10.25\" rear axle (\u003ca href=\"\/products\/50626-qu50626-timken-inner-wheel-bearing-for-1985-1994-ford-10-25-rear\" target=\"_blank\"\u003eQU50626\u003c\/a\u003e). For dual rear wheel trucks, it is large enough for most GM trucks with the 10.5\" or Dana 70 rear axle and most Fords with Dana 70 or Dana 80 rear axles, however, it is not large enough for 1970s to current Dodge dual rear wheel trucks (\u003ca href=\"\/products\/50624-qu50624-timken-inner-wheel-bearing-for-ford-10-1-2-rear-axles\" target=\"_blank\"\u003eQU50624\u003c\/a\u003e), GM dually trucks with 11.5\" rear axles, or 1985-1997 Ford DRW 10.25\" axles (\u003ca href=\"\/products\/50626-qu50626-timken-inner-wheel-bearing-for-1985-1994-ford-10-25-rear\" target=\"_blank\"\u003eQU50626\u003c\/a\u003e).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eExploded Views:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/collections\/exploded-views-for-4x4s-suvs-light-trucks\" target=\"_blank\"\u003eExploded View Page\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eDodge, GM, Ford, Dana 70, Dana 80\u003cbr\u003e Almost all 1 ton and smaller truck 4x4s (1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018) except 1985-1997 Fords with 10.25” rear axle. \u003cbr\u003e It is not large enough for 1970s to current Dodge dual rear wheel trucks (\u003ca href=\"\/products\/50624-qu50624-timken-inner-wheel-bearing-for-ford-10-1-2-rear-axles\" target=\"_blank\"\u003eQU50624\u003c\/a\u003e), 2011-up GM dually trucks with 11.5\" rear axles, or 1985-1997 Ford 10.25\" axles (\u003ca href=\"\/products\/50626-qu50626-timken-inner-wheel-bearing-for-1985-1994-ford-10-25-rear\" target=\"_blank\"\u003eQU50626\u003c\/a\u003e).\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656344248397,"sku":"5500","price":49.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt5500_1806_1600__04176_21129__85456.1707829536.1280.1280.png?v=1742482411"},{"product_id":"9404-qt9404-application-brush","title":"QT9404 Application Brush","description":"\u003cp\u003e\u003cstrong\u003eQT9404 Application Brush\u003c\/strong\u003e is ideal for applying Gear Marking Compound or Anti-Seize Lubricant to parts. Brush fibers and steel handle are resistant to most automotive chemicals. USA made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBrush Specs\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBrush Specs\u003c\/strong\u003e\u003cbr\u003eQT9404 is approximately 6\" long with a 1\/2\" wide brush.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eUniversal Application\u003c\/p\u003e\n","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656471453773,"sku":"9404","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt9404_clean__16421.1721845243.1280.1280.png?v=1742484546"},{"product_id":"9975-s9975-5-grams-anti-seize-lubricant","title":"S9975 5 grams Anti-Seize Lubricant","description":"\u003cp\u003e\u003cstrong\u003eS9975 Permatex 5 Gram Packet Anti-Seize Lubricant \u003c\/strong\u003ePrevents seizing, galling, corrosion, and withstands high temps. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More? See: \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" target=\"_blank\"\u003eS81343\u003c\/a\u003e Tube\u003c\/strong\u003e, 1 oz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eTo Apply\u003c\/a\u003e \u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#sds\"\u003e\u003cstrong\u003eSafety Data Sheets\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Apply \u003c\/strong\u003e\u003cbr\u003eI use \u003ca href=\"\/products\/9404-qt9404-application-brush\" target=\"_blank\"\u003eQT9404\u003c\/a\u003e Brush to apply Anti-Seize Lubricant on the threads and shanks of fasteners such as crossmember bolts that are subject to rust but are not usually prone to loosening up from vibration. I also use it on bellhousing Dowell Pins and between the mating surfaces of spindles or hubs and steering knuckles to prevent rust bonding.\u003c\/p\u003e\n\u003cp\u003e5 gram size is usually adequate for a single project such as an axle job. For larger jobs, order 1 ounce size \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" target=\"_blank\"\u003eS81343\u003c\/a\u003e which typically has enough material to do more complex projects like a clutch replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eCalifornia Proposition 65 \u003c\/strong\u003e\u003cbr\u003eThis product is not subject to California Proposition 65.\u003cbr\u003eSource: MSDS Version 5; Revision Date 27-Oct-2016\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"sds\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eSafety Data Sheets: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eMaterial Safety Data Sheet \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/81343_Anti_Seize_MSDS.pdf?v=1760973028\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003ca name=\"applications\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eUniversal","brand":"Permatex","offers":[{"title":"Default Title","offer_id":41656477384781,"sku":"9975","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/S9975clean__94533_9180__51405.1707831533.1280.1280.jpg?v=1742484669"},{"product_id":"9978-s9978-medium-strength-blue-242-threadlocker-1-gram","title":"S9978 Medium Strength Blue 242 Threadlocker (1 gram)","description":"\u003cp\u003e\u003cstrong\u003eS9978 Medium Strength Blue 242 Threadlocker\u003c\/strong\u003e is our most widely used Threadlocker for automotive applications. Medium strength Threadlockers are used on most fasteners subject to vibration caused loosening that are not exposed to high heat. Typical applications include axle shaft flange bolts, spindle bolts, hub retaining bolts, ring gear bolts, pinion nuts, transmission fasteners, transfer case hardware, clutch cover bolts, flywheel bolts, and more. \u003cbr\u003eTwo sizes available, S9978 will typically treat 4-8 fasteners depending upon size, \u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003eS24200\u003c\/a\u003e is usually enough to cover all the fasteners of a major component like an axle, transmission, or transfer case. USA Made.\u003c\/p\u003e \u003cp\u003eAlso see our \u003ca href=\"\/collections\/4x4-hardware-tools-automotive-shop-supplies\" target=\"_blank\"\u003eShop Supplies\u003c\/a\u003e web page for more thread treatment chemicals\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eWhen to Use\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#sds\"\u003e\u003cstrong\u003eSafety Data Sheets\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e When To Use\u003c\/strong\u003e\u003cbr\u003e Shop manuals may or may not specify the use of a Threadlocking compound. Most older manuals do not make any reference to any thread treatment, but most recent ones do. With the exception of wheel lug nuts, most threaded fasteners used in automotive drivetrains could be candidates for either a Threadlocker or anti-seize compound. If your service manual gives no guidance, you need to base your decision on both environmental conditions (corrosive and\/or wet) and the consequences that may occur if a fastener backs off. As a basic rule, I apply Threadlocker to most fasteners such as spindle bolts that could cause severe consequences if they loosened up. For things like cross member bolts that usually do not come loose, but are subject to corrosion, I use anti-seize.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eCalifornia Proposition 65\u003c\/strong\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/moved-694e4082f8d8fe1674bebf6b2f576e80.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals, including Titanium Dioxide 13464-67-7 which is known to the State of California to cause cancer. For more information, go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e \u003ctable style=\"height: 38px; width: 360px\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center\"\u003eChemical Name:\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003eCalifornia Proposition 65:\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e Titanium Dioxide – 13463-67-7\u003c\/td\u003e \u003ctd\u003eCarcinogen\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e(source: MSDS Version 2; Revision Date 02-Mar-2016)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"sds\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eSafety Data Sheets: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eMaterial Safety Data Sheet\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/MSDS-BlueThreadlocker-19967.pdf?v=1760728094\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":41656478400589,"sku":"9978","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/s9978_thmb__83979_24446__20813.1707831556.1280.1280.png?v=1742484686"},{"product_id":"4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set","title":"QK4647 4x4 Front Inner Axle Seal Remover Tool Set","description":"\u003cp\u003e\u003cstrong\u003eQK4647 Front Axle Inner Oil Seal Remover Set with 1-3\/4\" Driver Tip\u003c\/strong\u003e for many common front inner axle oil seals is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube inside diameters of 1-3\/4\" or larger and axle shaft seal inside diameters of 1-1\/2\" or smaller. This handy tool knocks out those tricky inner axle shaft seals in a flash! In addition, QK4647 lets you easily remove the 1-9\/16\" ID oil bath type front axle shaft oil seals on 1999-2004 Ford Super Duty and 2000-2005 Ford Excursion 4x4s without removing or damaging the fragile plastic axle tube guides. Space saving, two piece rod, threads together for removing the long side seal. Use just the long rod for knocking out the short side seal. For axles with axle tube  inside diameters of under 1-3\/4\", use the nut as your remover tip. Kit includes \u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e drive rod, \u003ca href=\"\/products\/1151-qt1151-short-extension-drive-rod-for-inner-axle-seal-removal\" target=\"_blank\"\u003eQT1151\u003c\/a\u003e extension rod, \u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e seal remover, and 2 \u003ca href=\"\/products\/95008-qu95008-certified-usa-made-7-8-9-unc-grade-8-coarse-thread-hex-nut\" target=\"_blank\"\u003eQU95008\u003c\/a\u003e Grade 8 jam nuts. Both \u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e and \u003ca href=\"\/products\/1151-qt1151-short-extension-drive-rod-for-inner-axle-seal-removal\" target=\"_blank\"\u003eQT1151\u003c\/a\u003e are made from U.S. produced 1.25\" diameter steel and have wrench flats machined in the shaft. Rods, Remover, and Nuts are USA Made. Finish on either rod may be either light Brown Oil Finish or Black Oxide (no choice)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSeal Installer Tools\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eDesign Change \u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eTo Install\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eTool Attachments\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eTool Sets\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eQK4647 Kit Includes:\u003cbr\u003e\u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e Seal Remover\u003cbr\u003e\u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e Drive Rod\u003cbr\u003e\u003ca href=\"\/products\/1151-qt1151-short-extension-drive-rod-for-inner-axle-seal-removal\" target=\"_blank\"\u003eQT1151\u003c\/a\u003e Extension Rod\u003cbr\u003e(2) \u003ca href=\"\/products\/95008-qu95008-certified-usa-made-7-8-9-unc-grade-8-coarse-thread-hex-nut\" target=\"_blank\"\u003eQU95008\u003c\/a\u003e Grade 8 Jam Nuts\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeal Installer Tools\u003c\/strong\u003e\u003cbr\u003eThe front inner axle shaft seals on Excursions and 1999 to 2004 Super Duty trucks can get really stuck to the housing. One way to break them free without wearing your arm out swinging a hammer is to use our Seal Installer Tools (\u003ca href=\"\/products\/664643-qk4643-adjustable-depth-front-inner-axle-seal-kit-1999-2005-ford-dana-50\" target=\"_blank\"\u003eQK4643\u003c\/a\u003e, \u003ca href=\"\/products\/4643-ts4643-adjustable-inner-axle-seal-tool-set-model-50\" target=\"_blank\"\u003eTS4643\u003c\/a\u003e, \u003ca href=\"\/products\/4644-qk4644-front-inner-axle-seal-and-tool-kit-for-ford-dana-60-super-60\" target=\"_blank\"\u003eQK4644\u003c\/a\u003e, or \u003ca href=\"\/products\/884644-ts4644-dana-60-adjustable-depth-inner-axle-seal-installer-tool-set\" target=\"_blank\"\u003eTS4644\u003c\/a\u003e) to break the old seals free. Once you get them to budge, remove the Installer and use QK4647 Tool Set to drive the seals out of the axle housing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003eOnce the seals are removed, you need to clean any dirt, grit, or crud out of the diff housing and axle tubes. After that, you can install your new seals. Seal installation is best done with our tooling made for your specific application. Sometimes you can get by with makeshift installers you cobble together, but in most cases, using makeshift tools just guarantees you get to do the job all over again!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Install\u003c\/strong\u003e\u003cbr\u003eMost inner axle seals are located right next to the differential and are impossible to replace without disassembling the axle up to and including the differential. Once everything except the pinion gear is removed, you drive the seals inward until they drop into the housing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool Attachments\u003c\/strong\u003e\u003cbr\u003eOur currently available attachments are:\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e:\u003c\/strong\u003e Fits axle tube inside diameters of 1.75\" and larger. Max seal ID with rubber lip seals is 1.5\", max seal diameter with oil bath type seal is 1-9\/16\" (used on Ford Excursion and Super Duty® Model 50 and 60 monobeam axles from 1999 to 2004). This remover fits most Model 30, Model 44, and GM 10 Bolt front axles. The outside diameter is made to fit through the inner plastic axle guides used on 1999-2004 Ford Super Duty and 2000-2005 Ford Excursion.\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e:\u003c\/strong\u003e Fits axle tube inside diameters of 2.00\" and larger. Max seal ID 1-3\/4\". This remover fits most Model Model 44, Model 50, Model 60, Model 61, Model Super 60, Model 70, AAM 925, and GM 10 Bolt front axles with 3\" or larger outside diameter axle tubes.\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"\/products\/1216-qt1216-2-25-axle-seal-remover\" target=\"_blank\"\u003eQT1216\u003c\/a\u003e:\u003c\/strong\u003e Fits axle tube inside diameters of 2.25\" and larger. Max seal ID 2\". This remover is primarily made to remove the large bore, right side seal on 2000-2002 Dodge Ram 2500 and Ram 3500 trucks with vacuum controlled Central Axle Disconnect (CAD). It will also work on all to remove the left seals on the same model trucks, plus either seal on all 2002 and newer Dodge Ram 2500 and Ram 3500 models and all 2005 and newer Ford Super Duty® F-250, F-350, F450, and F-550 4x4s. \u003cbr\u003e\u003cstrong\u003eFor Smaller Axles\u003c\/strong\u003e: For axle tube diameters between 1.50\" and 1.75\", you just use \u003ca href=\"\/products\/95008-qu95008-certified-usa-made-7-8-9-unc-grade-8-coarse-thread-hex-nut\" target=\"_blank\"\u003eQU95008\u003c\/a\u003e nut as the remover.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool Sets\u003c\/strong\u003e\u003cbr\u003eOur Front Axle Shaft Oil Seal Remover Tool Sets are:\u003cbr\u003eQK4647: Includes TS4563 Rod Assembly and \u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e Remover (Most smaller axles plus Ford Excursion and 1999-2004 Super Duty®)\u003cbr\u003e\u003ca href=\"\/products\/1184-ts1184-front-axle-shaft-oil-seal-remover-set-for-dodge-ram-with-cad\" target=\"_blank\"\u003eTS1184\u003c\/a\u003e: Includes \u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e Long Driver Rod, \u003ca href=\"\/products\/95007-qu95007-3-4-uss-grade-8-hex-nut\" target=\"_blank\"\u003eQU95007\u003c\/a\u003e Nut, and \u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e Remover (Specific Kit for most Dodge with CAD)\u003cbr\u003e\u003ca href=\"\/products\/4862-ts4862-inner-axle-remover-set\" target=\"_blank\"\u003eTS4862\u003c\/a\u003e: Includes TS4563 Rod Assembly and \u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e Remover (Most larger axles, Except: 2000-2002 CAD equipped Ram 2500 and Ram 3500 or Ford Excursion and 1999-2004 Super Duty®)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e Universal for most solid front drive axles with inner axle seal with an inside diameter of 1-1\/2\" or less\u003cbr\u003ePLUS: \u003cbr\u003e4x4 Ford Super Duty F-250, F-350, F-450, F-550: 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003eFord Excursion 4x4: 2000, 2001, 2002, 2003, 2004, 2005\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656752570445,"sku":"4647","price":149.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4647__83388_7373__35507.1707849125.1280.1280.jpg?v=1778720430"},{"product_id":"4708-tk4708-master-3-4-ton-4x4-front-wheel-bearing-kit-with-tools-1960-1977","title":"TK4708 Master 3\/4 ton 4x4 Front Wheel Bearing Kit with Tools 1960-1977","description":"\u003cp\u003e\u003cstrong\u003e TK4708 Torque King® 3\/4 Ton Front Wheel Bearing Master Kit with Tools and Timken Bearings for Chevy, Ford, GMC, and Jeep\u003c\/strong\u003e combines top-notch parts with time-saving USA Made tools! No more mashed fingers, dinged seals, or nicked bearing cups from using make-shift tools! TK4708 Kit includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer and Driver Handle. This kit will fit 1961-1977.5 Ford F250 Dana 44HD 3500 lb. and 1974-1977.5 Dana 60 3800 lb. 4x4 Front Axles with external mount lockout hubs or drive flanges. TK4708 additionally fits 1974-1977.5 Jeep J20 3\/4 ton Dana 44 with External Mount Wheel Hub as well as 1960 to 1977.5 Chevy and GMC 3\/4 ton 4x4 Suburban's and trucks. Do the job right the first time with premium quality parts and installation tools custom made for the job!\u003c\/p\u003e\n\u003cp\u003eAlso available:\u003cbr\u003e\u003ca href=\"\/products\/4779-tk4779-3-4-ton-front-wheel-bearing-seal-kit-chevy-ford-gmc-jeep\" target=\"_blank\"\u003eTK4779\u003c\/a\u003e Parts Only Kit includes the bearings and seals but no tools.\u003cbr\u003e\u003ca href=\"\/products\/134899-tk4899-1960-1977-5-3-4-ton-front-wheel-bearing-only-kit-for-dana-44\" target=\"_blank\"\u003eTK4899\u003c\/a\u003e Bearings Only Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Includes\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003e1961-1975 Ford Dana 44\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003e1977 Chevy, Ford, GMC, and Jeep\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eSpindle Nut Socket\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note5\"\u003eMatching Parts for Jeep\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note6\"\u003eMatching Parts for Ford\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note7\"\u003eMatching Parts for Chevy\/GMC\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Includes\u003c\/strong\u003e\u003cbr\u003eTK4708 Kit with Installation Tools includes these parts: \u003cbr\u003e(2) \u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Timken® Outer Wheel Bearing Cups\u003cbr\u003e(2) \u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Timken® Outer Wheel Bearings \u003cbr\u003e(2) \u003ca href=\"\/products\/50568-qu50568-timken-tapered-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50568\u003c\/a\u003e Timken® Inner Wheel Bearing Cups \u003cbr\u003e(2) \u003ca href=\"\/products\/50569-qu50569-timken-tapered-inner-wheel-roller-bearing\" target=\"_blank\"\u003eQU50569\u003c\/a\u003e Timken® Inner Wheel Bearings\u003cbr\u003e(2) \u003ca href=\"\/products\/50101-qu50101-premium-oe-type-front-inner-wheel-seal\" target=\"_blank\"\u003eQU50101\u003c\/a\u003e Premium Front Wheel Seals\u003cbr\u003e\u003ca href=\"\/products\/1802-qt1802-bearing-cup-installer-2-7-8-approximate-outside-diameter\" target=\"_blank\"\u003eQT1802\u003c\/a\u003e Outer Wheel Bearing Cup Installer, \u003cbr\u003e\u003ca href=\"\/products\/1805-qt1805-bearing-cup-installer-3-1-2-approximate-outside-diameter\" target=\"_blank\"\u003eQT1805\u003c\/a\u003e Inner Wheel Bearing Cup Installer \u003cbr\u003e\u003ca href=\"\/products\/1506-qt1506-front-wheel-seal-installer-for-dana-44-dana-60\" target=\"_blank\"\u003eQT1506\u003c\/a\u003e Front Wheel Seal Installer \u003cbr\u003e\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e Driver Handle\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1961-1975 Ford Dana 44\u003c\/strong\u003e\u003cbr\u003eFor the 1961-1975 model years, Ford used both standard 3300 pound rated and Heavy-Duty Dana 44HD 3500 pound rated closed knuckle front axles. \u003ca href=\"\/products\/4779-tk4779-3-4-ton-front-wheel-bearing-seal-kit-chevy-ford-gmc-jeep\" target=\"_blank\"\u003eTK4779 \u003c\/a\u003eONLY fits the Dana 44HD axle for these years. The Dana 44HD can easily be identified by the following features:\u003cbr\u003e6 Bolt External Mount Hub Lock or Drive Flange (Bolt Size is 3\/8\")\u003cbr\u003e12 Bolt Knuckle Ball Seals\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1977 Chevy, Ford, GMC, and Jeep\u003c\/strong\u003e\u003cbr\u003e1977 was a transition year for the type of front wheel hubs used on 3\/4 ton Ford, General Motors and Jeep 4x4s. \u003ca href=\"\/products\/4779-tk4779-3-4-ton-front-wheel-bearing-seal-kit-chevy-ford-gmc-jeep\" target=\"_blank\"\u003eTK4779 \u003c\/a\u003efits the early production hubs which have 6 Bolt External Mount Hub Locks or Drive Flanges (Bolt Size is 3\/8\"). Later production 1977 axles will have internally splined front wheel hubs.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Nut Socket\u003c\/strong\u003e\u003cbr\u003eIf you need a Spindle Nut Socket, order \u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e, \u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i\u003c\/a\u003e, or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts For Jeep\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Outer Paper Gasket for Lockout Hub \u003cbr\u003e\u003ca href=\"\/products\/40323-qu40323-3-4-ton-dana-44-front-spindle-assembly\" target=\"_blank\"\u003eQU40323\u003c\/a\u003e Spindle, 1974-1977.5 Jeep J20\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Sockets\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts For Ford\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Inner Metal Gasket for Factory Spicer Hub\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Fiber Gasket for Drive Flanges and Lockout Hubs \u003cbr\u003e\u003ca href=\"\/products\/40332-qu40332-front-spindle-kit-for-1976-1977-5-ford-f250-dana-44\" target=\"_blank\"\u003eQU40332\u003c\/a\u003e Spindle, 1976-1977.5 Ford F250\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Sockets\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for Chevy\/GMC\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Inner Metal Gasket for Factory Spicer Hub\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Outer Paper Gasket for Factory Spicer Hub\u003cbr\u003e\u003ca href=\"\/products\/40323-qu40323-3-4-ton-dana-44-front-spindle-assembly\" target=\"_blank\"\u003eQU40323\u003c\/a\u003e Spindle, 1971-1977.5 GM K20, K25\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Round, 4 Slot Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer \u003cbr\u003e\u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e 4 Lug Spindle Nut Sockets\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eK20, K25, K2500: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF-250 with the Dana 44HD Closed Knuckle Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF-250 with Dana 44 Open Knuckle Front Axle: 1976, 1977, 1977.5\u003cbr\u003eF-250 Crew Cab with Closed Knuckle Dana 60 Front Axle: 1973, 1974, 1975\u003cbr\u003eF-250 Crew Cab with Open Knuckle Dana 60 Front Axle: 1976, 1977, 1977.5\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJ20: 1974, 1975, 1976, 1977, 1977.5\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656759746637,"sku":"4708","price":334.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/TK4708_1.png?v=1778716192"},{"product_id":"4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts","title":"QK4727 Dana 30 \u0026 Dana 44 Front Spindle Nut Kit with Round 4-Slot \u0026 1-5\/8\" Thread Nuts","description":"\u003cp\u003e\u003cstrong\u003eQK4727 4 Slot Dana 30, Dana 44, GM 10 Bolt Front Spindle Nut Kit \u003c\/strong\u003eincludes one each genuine original equipment \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut, \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e Spindle Nut Lock Washer, and \u003ca href=\"\/products\/40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread\" target=\"_blank\"\u003eQU40031\u003c\/a\u003e Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC), and 1974-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This nut was used as the inner spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974. Jeep J-series full size 4x4s also used these parts from 1973-1989. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/554727-qa4727u-good-used-4-slot-front-spindle-nut-kit\" target=\"_blank\"\u003eQA4727U\u003c\/a\u003e Used Front Spindle Nut Kit available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFitment\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eTool\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eQK4727 Spindle Nut Kit fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThe pin that protrudes from the outboard face of \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut is an anti-rotation device that engages with one of the holes in \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003cbr\u003e\u003c\/strong\u003e1\/2 ton and 3\/4 ton trucks with Dana 44 or GM 10 Bolt front axles with serviceable wheel bearings: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton ton trucks with Dana 44 front axle and serviceable wheel bearings: 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e:\u003cbr\u003eBroncos with Dana 30 front axle: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eF150, F250, Bronco with Dana 44 Front Axle: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF100, F150, F250 1\/2 ton and 3\/4 ton trucks with standard Dana 44 front axle and serviceable wheel bearings: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF250 Crew Cab Dana 60 Front Axle: 1974, 1975, 1976, 1977\u003cbr\u003eF150, Bronco with Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with Dana 44IFS Front Axle, Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton 1100 and 1110 series 4x4: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series Full Size 4x4s:\u003c\/strong\u003e\u003cbr\u003eWagoneer, Cherokee, Cherokee Chief, J10, J20 Dana 44 front axles: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656760729677,"sku":"4727","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QK4727_0474_clean__53543_19646__09429.1707849699.1280.1280.png?v=1742500652"},{"product_id":"4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles","title":"QK4734 Pair of Spindle Bearings for Dana 30, Dana 44, GM 10 Bolt Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQK4734 Front Axle Shaft Spindle Bearing Set\u003c\/strong\u003e fits late 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles, plus 1976-1977 Ford F-250 crew Cab Dana 60 axles. One bearing is pressed into each spindle to support the outer axle shaft. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eLittle Bearing, Big Job\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSeals and Thru\u003c\/a\u003est Washers\u003cbr\u003e\u003ca href=\"#note3\"\u003eBearing Depth\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eChevy\/GMC Exploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eDodge\/Plymouth\/Ram Exploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eFord Exploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note7\"\u003eInternational Exploded Views\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eJeep Exploded Views\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLittle Bearing, Big Job\u003c\/strong\u003e\u003cbr\u003eThese little bearings carry almost all the weight of your heavy axle shafts. The only support point inside the axle housing is the differential itself, there are no bearings or bushings in the axle tubes except on the disconnect side of 1989-1993 Dodge Dana 44 axles with vacuum controlled central axle disconnect systems.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeals and Thrust Washers\u003c\/strong\u003e\u003cbr\u003eOver the years, several seal and thrust washer configurations were used to protect this bearing. For mid 1970's and later, all applications will use either \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003e\u003cspan\u003eQU40056\u003c\/span\u003e \u003c\/a\u003eSmall V-Seal or \u003ca href=\"\/products\/40556-qu40556-spindle-seal-thrust-washer-1993-97-ford-d44-ifs\" target=\"_blank\"\u003e\u003cspan\u003eQU40556\u003c\/span\u003e \u003c\/a\u003eUnitized Seal\/Thrust Washer. QK4734 Spindle Bearings must be installed deep enough that the thrust washer will seat against the spindle face. For ALL applications, care must be taken not to seat the bearing too deep as it will bind if pressed beyond the machined bore.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBearing Depth\u003c\/strong\u003e\u003cbr\u003eEarly production Dana 30 and Dana 44 open knuckle axles that used these bearings (generally prior to 1975) did not use \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003e\u003cspan\u003eQU40056\u003c\/span\u003e\u003c\/a\u003e Small Spindle V-Seal between the spindle bearing and axle shaft thrust washer. Spindles from these early axles are not bored deep enough to install both a spindle bearing and a seal. Circa 1975 and later axles do have deeper spindle bearing bores. For these axles, use optional \u003ca href=\"\/products\/1134-qt1134-spindle-bearing-installer-tool-for-dana-30-35ifs-44-44ifs-early-ford-dana-60-and-gm-10-bolt-front-axles\" target=\"_blank\"\u003e\u003cspan\u003eQT1134\u003c\/span\u003e \u003c\/a\u003eSpindle Bearing Installer to seat your new QK4734 Spindle Bearings to the correct depth below the spindle face to permit the installation of \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003e\u003cspan\u003eQU40056\u003c\/span\u003e \u003c\/a\u003eSmall spindle V-Seal\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e =\"color: #ff0000\"\u0026gt;\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e Chevy\/GMC Exploded Views\u003cbr\u003e\u003c\/strong\u003eLinks to our FREE, application specific \u003ca href=\"\/collections\/chevy-and-gmc-4x4-front-axle-exploded-views\" target=\"_blank\"\u003e\u003cspan\u003eexploded views for Chevy or GMC\u003c\/span\u003e\u003c\/a\u003e 4x4 fro \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e nt axles that use QK4734 Spindle Bearings\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cs style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e f0000\"\u0026gt;\u003ca name=\"note5\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge\/Plymouth\/Ram Exploded Views\u003c\/strong\u003e\u003cbr\u003e\u003c\/s\u003e\u003c\/strong\u003eLinks to our FREE, application specific \u003ca href=\"\/collections\/dodge-ram-front-axle-exploded-views\" target=\"_blank\" style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e \u0026gt;\u003cspan\u003eexploded views for Dodge, Plymouth, or Ram\u003c\/span\u003e\u003c\/a\u003e 4x4 front axles tha\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e  Bearings\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFord Exploded Views\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eLinks to our FREE, applica \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e tion specific \u003ca href=\"\/collections\/ford-4x4-front-axle-exploded-views\" target=\"_blank\"\u003e\u003cspan\u003eexplode\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e an\u0026gt;\u003c\/span\u003e\u003c\/a\u003e 4x4 front axles that use QK4734 Spindle Bearings\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInternational Exploded Views\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eLinks to our FREE, application specific \u003ca href=\"\/collections\/international-front-axle-exploded-views\" targ style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e ploded views for IHC\u003c\/a\u003e 4x4 front axles that use QK4734 Spindle Bearings\u003cbr\u003eUnder Construction!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eJeep Exploded Views\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eLinks to our FREE, application specific \u003ca href=\"\/collections\/jeep-front-axle-exploded-views\" target=\"_blank\"\u003e\u003cspan\u003eexploded views for Jeep\u003c\/span\u003e\u003c\/a\u003e 4x4 front axles that use QK4734 Spindle Bearings\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cp\u003e\u003cstrong\u003eSolid Axles:\u003c\/strong\u003e\u003cbr\u003eLate 1960's to 1990's Dana 30, Dana 44, and GM 10 Bolt front axles\u003cbr\u003eFord F-250 crew Cab Dana 60 axles: 1976,1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIFS Axles:\u003c\/strong\u003e\u003cbr\u003e1980-1996 Ford Bronco and F150 Dana 44IFS Front Axles\u003cbr\u003e1990-1997 Ford Expedition and Ranger Dana 35IFS Front Axles\u003cbr\u003e1994-1997 Ford Ranger Dana 28IFS Front Axles\u003c\/p\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656762040397,"sku":"4734","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4734_clean__91883.1721236243.1280.1280.png?v=1742500776"},{"product_id":"4739-qk4739-4x4-front-spindle-seal-and-thrust-washer-kit","title":"QK4739 4x4 Front Spindle Seal and Thrust Washer Kit","description":"\u003cp\u003e\u003cstrong\u003eQK4739 4x4 Front Spindle Seal and Thrust Washer Kit\u003c\/strong\u003e contains genuine original equipment spindle seals and thrust washers to service \u003cstrong\u003eboth\u003c\/strong\u003e sides of your front axle on your 4x4 truck. Fits most Mid 1970's to 1993 SUV, 1\/2, and standard 3\/4 ton Model 30, 44, 44IFS, and GM 10 bolt open knuckle front 4x4 drive axles. These inexpensive parts should be replaced \u003cem\u003e\u003cstrong\u003eanytime\u003c\/strong\u003e\u003c\/em\u003e the spindle is removed. Thrust Washers USA Made, Seals imported.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMatching Slinger\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eKit Contents\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eDead Spindle Design\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003e1985-1993 Dodge\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note5\"\u003eFord\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note6\"\u003e1983.5-1996 Ford\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note7\"\u003eJeep\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003eMatching Parts\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Slinger\u003c\/strong\u003e\u003cbr\u003eThe matching Axle Shaft Slinger is \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Contents\u003c\/strong\u003e\u003cbr\u003eQK4739 includes two each of these genuine original equipment component parts: \u003ca href=\"\/products\/40056-qu40056-small-spindle-to-axle-shaft-v-seal\" target=\"_blank\"\u003eQU40056\u003c\/a\u003e Small V-Seal, \u003ca href=\"\/products\/40070-qu40070-plastic-front-axle-shaft-to-spindle-thrust-washer\" target=\"_blank\"\u003eQU40070\u003c\/a\u003e Axle Shaft Thrust Washer, and \u003ca href=\"\/products\/40071-qu40071-large-outer-axle-shaft-to-spindle-v-seal-dana-30-44-gm-10b\" target=\"_blank\"\u003eQU40071\u003c\/a\u003e Large V-Seal.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDead Spindle Design\u003c\/strong\u003e\u003cbr\u003eThe dead spindle design on many early open knuckle front axles use a needle bearing to support the outer axle shaft. To protect the bearing and control axial thrust, a 4 piece set consisting of an Axle Shaft Slinger, Large V-Seal, Small V-Seal, and Thrust Washer was used. We have Kits and individual exact replacement Dana-Spicer Spindle small parts for your hard-working 4x4s.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1985-1993 Dodge\u003c\/strong\u003e\u003cbr\u003eThe dead spindle design of the 1985-1993 Dodge Dana 44 CAD front axle uses a needle bearing to support the right outer axle shaft and on 1988-1993 left outer axle shafts. On 1985-1987 trucks, no spindle bearing is used on the LEFT side as the left inner axle shaft is supported next to the yoke by \u003ca href=\"\/products\/50155-qu50155-front-axle-transmission-and-transfer-case-roller-bearing\" target=\"_blank\"\u003eQU50155\u003c\/a\u003e Bearing. To protect the spindle bearing and control axial thrust, a 4 piece set consisting of an Axle Shaft Slinger, Large V-Seal, Small V-Seal, and Thrust Washer was used. We have both Kits and individual exact replacement Dana-Spicer Spindle small parts for your hard-working 1985-1993 Dodge 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eFord used a single, 2\" ID metal shell Spindle Seal up to 1972. These axles also have a bronze outer axle shaft thrust washer. For most 1973 and newer axles, these parts were replaced by a larger diameter single rubber V-Seal and a plastic trust washer, however Ford does catalog a 2\" ID Rubber V-Seal for some 1973-1976 axles. In 1974, an additional V-Seal was added next to the spindle bearing on most axles. To accommodate the new part, the spindle had to be bored a bit deeper so the spindle bearing could be installed to a slightly greater depth. The 1974 design was used on all subsequent Ford Dana 44 axles through 1979.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1983.5-1996 Ford\u003c\/strong\u003e\u003cbr\u003eThe dead, hollow spindle design of the 1983.5-1996 era Ford Dana 44 IFS axles uses one QK4734.5 needle bearing to support the outer axle shaft. Ford used two different Spindle Seal types for 1983.5-1996 Dana 44IFS Front Axles. A two part Spindle Seal and Thrust Washer design was new for 1993, replacing the earlier four piece set-up used on most trucks from 1983.5-1992. Personally, I prefer the older Seal design which can be retrofitted to 1993-1996 trucks if you order (2) \u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Slingers and (1) \u003ca href=\"\/products\/4739-qk4739-4x4-front-spindle-seal-and-thrust-washer-kit\" target=\"_blank\"\u003eQK4739\u003c\/a\u003e Seal and Thrust Washer Set.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eJeep\u003c\/strong\u003e\u003cbr\u003eAlthough Jeep Parts Books show a 2\" ID V-Seal for 1974-1979, I can not recall seeing any of Jeeps with the 2\" Seal, all had the 2-1\/4\" ID Seal. In the early 1980's, we did get some Spindle Kits for 1974-1976 drum brake Cherokees on a closeout deal from Jeep that did include the 2\" Seal so we sell this and the small Slinger in case you need one for an early production axle, but most if not all 1974-1976 and ALL 1977 and newer J-Series axles have the 2-1\/4\" Seal and Thrust Washer set-up.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40058-qu40058-2-1-4-4x4-outer-axle-shaft-slinger-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40058\u003c\/a\u003e Slinger\u003cbr\u003e\u003ca href=\"\/products\/4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQK4734\u003c\/a\u003e Spindle Bearing Set\u003cbr\u003e\u003ca href=\"\/products\/40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt\" target=\"_blank\"\u003eQU40228\u003c\/a\u003e Spindle Bearing and Seal Kit for 1 side\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GM:\u003c\/strong\u003e\u003cbr\u003e10 Bolt Open Knuckle 4x4 Front Drive Axles: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eRamcharger, W-150, W-250 4x4s with Dana 44 Open Knuckle front axle: 1980, 1981, 1982, 1983, 1984\u003cbr\u003eRamcharger, W-100, W-150, W-200, W-250 4x4x with Dana 44 open knuckle front axle: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003ePlymouth Traildusters with Dana 44 Open Knuckle front axles: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco, F-100, F-150, with Dana 44 front axle with 2nd design V-Seal: 1974, 1975, 1976\u003cbr\u003eBronco, F-100, F-150, with Dana 44 front axle: All 1977, 1978, 1979\u003cbr\u003eF-250 4x4s with Dana 44 open knuckle front axle: 1976, 1977, 1978, 1979\u003cbr\u003eBronco, F-150, F-250 4x4s with Dana 44IFS Twin Traction Beam front axle: 1983.5, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, J10, J20, Wagoneer with Dana 44 open knuckle front axle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656762433613,"sku":"4739","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QK4739-1.png?v=1772222850"},{"product_id":"20054-qu20054-ford-f250-f350-front-disc-brake-caliper-tension-spring","title":"QU20054 Ford F250, F350 Front Disc Brake Caliper Tension Spring","description":"\u003cp\u003e\u003cstrong\u003eQU20054 Ford F250, F350 Front Disc Brake Caliper Tension Spring\u003c\/strong\u003e For 1976-1984 Ford F250 Dana 44, Dana 44IFS, Dana 50IFS, and Dana 60 front axles with dual piston calipers.\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41656780488781,"sku":"20054","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20054__80207_8258__55457.1707851677.1280.1280.jpg?v=1742502230"},{"product_id":"20106-qu20106-2-5-16-o-d-worm-shaft-bearing-cup-for-some-67-77-f250-4x4s","title":"QU20106 2-5\/16\" O.D. Worm Shaft Bearing Cup for some 67-77 F250 4x4's","description":"\u003cp\u003e\u003cstrong\u003eQU20106 2-5\/16\" O.D. Worm Shaft Bearing Cup\u003c\/strong\u003e for most 1967-1977 F250 4x4 trucks with manual steering gears. Limited supply, available while supplies last.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656796020813,"sku":"20106","price":12.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20106__56432_8290__59508.1707852729.1280.1280.jpg?v=1742503087"},{"product_id":"20109-qu20109u-used-spicer-hub-axle-shaft-drive-gear-for-external-mount-hubs","title":"QU20109U Used Spicer Hub Axle Shaft Drive Gear for External Mount Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU20109U USED Spicer Hub Axle Shaft Drive Gear for External Mount Hubs Only \u003c\/strong\u003efor Chevy, Ford and GMC Dana 44 or closed knuckle Dana 60 front drive axles with external mount plastic dial Spicer factory hubs that mount to the wheel hub with 6 long 3\/8\" Allen Head Bolts. Available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/9920109-qu20109-spicer-hub-axle-shaft-drive-gear-for-external-mount-hubs\" target=\"_blank\"\u003eQU20109\u003c\/a\u003e New\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eLimited Parts Supply\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLimited Parts Supply\u003c\/strong\u003e\u003cbr\u003eSpicer made external mount Plastic Dial free-wheel Hub-Locks from 1972 to mid-1977. These Hubs were the factory original equipment parts for both to Ford and GM 3\/4 ton 4x4 trucks with Dana 44 front axles. They were also used on Ford F-250 Crew Cab trucks with Dana 60 closed knuckle front axles from 1974-1975. Most parts for these hubs have been out of production for decades so parts availability is becoming quite limited.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU20109U Axle Shaft Gear are:\u003cbr\u003e\u003ca href=\"\/products\/40602-tk40602-hub-gear-bushing-for-dana-external-mount-hublocks\" target=\"_blank\"\u003eTK40602\u003c\/a\u003e Bushing, Axle Shaft Drive Gear Support \u003cbr\u003e\u003ca href=\"\/products\/20114-qu20114-spicer-hub-clutch-gear\" target=\"_blank\"\u003eQU20114\u003c\/a\u003e Hub Drive Gear\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40546-qu40546uas-used-spicer-external-mount-lockout-hub-chrome-cap\" target=\"_blank\"\u003eQU40546\u003c\/a\u003e Outer Chrome Cap\u003cbr\u003e\u003ca href=\"\/products\/40547-qu40547-spicer-splined-hub-body\" target=\"_blank\"\u003eQU40547\u003c\/a\u003e Splined Hub Body\u003cbr\u003e\u003ca href=\"\/products\/40256-tk40256-red-torque-king-heavy-duty-replacement-hub-dial\" target=\"_blank\"\u003eTK40256\u003c\/a\u003e Red Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/40471-tk40471-hub-dial-o-ring-spicer-plastic-hub-dials-in-ford-gm-3-4-tons\" target=\"_blank\"\u003eTK40471\u003c\/a\u003e Dial Sealing Ring \u003cbr\u003e\u003ca href=\"\/products\/9940406-qu40406-spicer-hub-cam-for-external-mount-front-hubs-on-ford-gm\" target=\"_blank\"\u003eQU40406\u003c\/a\u003e Hub Cam \u003cbr\u003e\u003ca href=\"\/products\/40257-qu40257-allen-head-hub-bolt\" target=\"_blank\"\u003eQU40257\u003c\/a\u003e Hub Bolt\u003cbr\u003e\u003ca href=\"\/products\/40231-qu40231-spicer-hub-sealing-lock-washer\" target=\"_blank\"\u003eQU40231\u003c\/a\u003e Sealing Washer \u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Metal Inner Hub Gasket\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Outer Fiber Hub Gasket\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC 3\/4 ton 4x4:\u003c\/strong\u003e\u003cbr\u003eK20, K25 with External Mount Hubs: 1972, 1973, 1974, 1975, 1976\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord F-250 3\/4 ton 4x4:\u003c\/strong\u003e\u003cbr\u003eClosed Knuckle Dana 44HD 3500# Axle with External Mount Hub: 1972, 1973, 1974, 1975\u003cbr\u003eOpen Knuckle Dana 44 Axle with 6 Bolt External Mount Spicer Hub: 1976, 1977.5\u003cbr\u003eCrew Cab with Dana 60 Closed Knuckle Axle with External Mount Hub: 1973, 1974, 1975\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41656796282957,"sku":"20109","price":85.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20109__18588_8292__21323.1707852779.1280.1280.jpg?v=1742503148"},{"product_id":"20112-qu20112-hub-dial-snap-ring-for-spicer-external-mount-hub-locks","title":"QU20112 Hub Dial Snap Ring for Spicer External Mount Hub Locks","description":"\u003cp\u003e\u003cstrong\u003eQU20112 Spicer Hub Dial Snap Ring\u003c\/strong\u003e for Dana Spicer External Mount Plastic Dial Hubs on 1970 to 1977.5 Chevy and GMC 3\/4 ton 4x4s with Dana 44 front axles plus 1972-1975 Ford F250 Dana 44HD and 1976-1977.5 F250 Dana 44 Front drive axles. QU20112 also fits 1974-1975 Ford F250 Crew Cab Dana 60 front axles. QU20112 is a genuine original equipment Spicer New Old Stock (NOS) Snap Ring that secures the Hub Dial in \u003ca href=\"\/products\/40546-qu40546uas-used-spicer-external-mount-lockout-hub-chrome-cap\" target=\"_blank\"\u003eQU40546\u003c\/a\u003e Chrome Cap. Limited Supply.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eRemoving the Snap Ring\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eLimited Availability\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRemoving the Snap Ring\u003c\/strong\u003e\u003cbr\u003eUnless you have a long reach pair of flat tipped snap ring pliers, spreading this snap ring to remove it can be a real witch.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLimited Availability\u003c\/strong\u003e\u003cbr\u003eSpicer made external mount Plastic Dial free-wheel Hub-Locks from the late 1960's to the mid-1970's. These Hubs were the factory original equipment parts for both to Ford and GM 3\/4 ton 4x4 trucks with Dana 44 front axles. They were also used on Ford F-250 Crew Cab trucks with Dana 60 closed knuckle front axles from 1974-1975. Most parts for these hubs have been out of production for decades so parts availability is becoming quite limited.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU20112 Hub Dial Snap Ring are:\u003cbr\u003e\u003ca href=\"\/products\/40256-tk40256-red-torque-king-heavy-duty-replacement-hub-dial\" target=\"_blank\"\u003eTK40256\u003c\/a\u003e \u003cem\u003e\u003cstrong\u003eTorque King\u003c\/strong\u003e\u003c\/em\u003e® Heavy-Duty Anodized Aluminum Replacement Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/30198-tk30198-gold-heavy-duty-aluminum-replacement-spicer-d44-hub-dial\" target=\"_blank\"\u003eTK30198\u003c\/a\u003e Yellow (Gold) Aluminum Hub Dial for GM\u003cbr\u003e\u003ca href=\"\/products\/42053-tk42053-blue-anodized-aluminum-replacement-hub-dial-for-spicer-hubs\" target=\"_blank\"\u003eTK42053\u003c\/a\u003e Blue Aluminum Hub Dial for GM\u003cbr\u003e\u003ca href=\"\/products\/9920109-qu20109-spicer-hub-axle-shaft-drive-gear-for-external-mount-hubs\" target=\"_blank\"\u003eQU20109\u003c\/a\u003e Axle Shaft Gear\u003cbr\u003e\u003ca href=\"\/products\/20114-qu20114-spicer-hub-clutch-gear\" target=\"_blank\"\u003eQU20114\u003c\/a\u003e Hub Drive Gear\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40546-qu40546uas-used-spicer-external-mount-lockout-hub-chrome-cap\" target=\"_blank\"\u003eQU40546\u003c\/a\u003e Outer Chrome Cap\u003cbr\u003e\u003ca href=\"\/products\/40547-qu40547-spicer-splined-hub-body\" target=\"_blank\"\u003eQU40547\u003c\/a\u003e Splined Hub Body\u003cbr\u003e\u003ca href=\"\/products\/40471-tk40471-hub-dial-o-ring-spicer-plastic-hub-dials-in-ford-gm-3-4-tons\" target=\"_blank\"\u003eTK40471\u003c\/a\u003e Dial Sealing Ring\u003cbr\u003e\u003ca href=\"\/products\/9940918-qu40918-spicer-hub-dial-pin\" target=\"_blank\"\u003eQU40918\u003c\/a\u003e Hub Dial to Hub Cam Pin\u003cbr\u003e\u003ca href=\"\/products\/9940406-qu40406-spicer-hub-cam-for-external-mount-front-hubs-on-ford-gm\" target=\"_blank\"\u003eQU40406\u003c\/a\u003e Hub Cam \u003cbr\u003e\u003ca href=\"\/products\/40257-qu40257-allen-head-hub-bolt\" target=\"_blank\"\u003eQU40257\u003c\/a\u003e Hub Bolt\u003cbr\u003e\u003ca href=\"\/products\/40231-qu40231-spicer-hub-sealing-lock-washer\" target=\"_blank\"\u003eQU40231\u003c\/a\u003e Sealing Washer \u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Metal Inner Hub Gasket\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Outer Fiber Hub Gasket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC 3\/4 ton 4x4\u003c\/strong\u003e\u003cbr\u003eK20, K25 with Dana 44 Front Axles: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1977.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord F-250 3\/4 ton 4x4:\u003c\/strong\u003e\u003cbr\u003eClosed Knuckle Dana 44HD 3500# Axle: 1972, 1973, 1974, 1975\u003cbr\u003eOpen Knuckle Dana 44 Axle with 6 Bolt External Mount Spicer Hub: 1976, 1977, 1977.5\u003cbr\u003eCrew Cab with Dana 60 Closed Knuckle Axle: 1973, 1974, 1975\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656796545101,"sku":"20112","price":43.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20112__44420_8297__50638.1707852841.1280.1280.jpg?v=1742503197"},{"product_id":"20113-qu20113-manual-steering-gear-worm-shaft-seal-for-1976-1977-f250","title":"QU20113 Manual Steering Gear Worm Shaft Seal for 1976-1977 F250","description":"\u003cp\u003e\u003cstrong\u003eQU20113 Manual Steering Gear Worm Shaft Seal\u003c\/strong\u003e for 1976-1977 F250 with steering gear Tag# D6TA-HA, Ref# 378AS022.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656796905549,"sku":"20113","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20113__54513_8298__11696.1707852858.1280.1280.jpg?v=1742503219"},{"product_id":"20114-qu20114-spicer-hub-clutch-gear","title":"QU20114 Spicer Hub Clutch Gear","description":"\u003cp\u003e\u003cstrong\u003eQU20114 Spicer Hub Clutch Gear\u003c\/strong\u003e is a New Old Stock (NOS) genuine Dana-Spicer part for Chevy, Ford, and GMC Dana 44 or closed knuckle Dana 60 front drive axles with external mount plastic dial Spicer factory hubs that mount to the wheel hub with (6) long 3\/8\" Allen Head Bolts.\u003c\/p\u003e \u003cp\u003eAlso available while supplies last: \u003ca href=\"\/products\/5520114-qu20114u-used-hub-clutch-gear\" target=\"_blank\"\u003eQU20114U\u003c\/a\u003e Used\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eLimited Availability\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLimited Availability\u003c\/strong\u003e\u003cbr\u003eSpicer made external mount Plastic Dial free-wheel Hub-Locks for 1972-1977 3\/4 ton 4x4s. These Hubs were the factory original equipment parts for both Ford and GM 3\/4 ton 4x4 trucks with Dana 44 front axles. They were also used on Ford F-250 Crew Cab trucks with Dana 60 closed knuckle front axles from 1974-1975. Most parts for these hubs have been out of production for decades, so parts availability is becoming quite limited.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU20114 Hub Gear are:\u003cbr\u003e\u003ca href=\"\/products\/40547-qu40547-spicer-splined-hub-body\" target=\"_blank\"\u003eQU40547\u003c\/a\u003e Axle Shaft Gear\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40546-qu40546uas-used-spicer-external-mount-lockout-hub-chrome-cap\" target=\"_blank\"\u003eQU40546\u003c\/a\u003e Outer Chrome Cap\u003cbr\u003e\u003ca href=\"\/products\/40547-qu40547-spicer-splined-hub-body\" target=\"_blank\"\u003eQU40547\u003c\/a\u003e Splined Hub Body\u003cbr\u003e\u003ca href=\"\/products\/40256-tk40256-red-torque-king-heavy-duty-replacement-hub-dial\" target=\"_blank\"\u003eTK40256\u003c\/a\u003e Hub Dial\u003cbr\u003e\u003ca href=\"\/products\/40471-tk40471-hub-dial-o-ring-spicer-plastic-hub-dials-in-ford-gm-3-4-tons\" target=\"_blank\"\u003eTK40471\u003c\/a\u003e Dial Sealing Ring \u003cbr\u003e\u003ca href=\"\/products\/9940406-qu40406-spicer-hub-cam-for-external-mount-front-hubs-on-ford-gm\" target=\"_blank\"\u003eQU40406\u003c\/a\u003e Hub Cam \u003cbr\u003e\u003ca href=\"\/products\/40257-qu40257-allen-head-hub-bolt\" target=\"_blank\"\u003eQU40257\u003c\/a\u003e Hub Bolt\u003cbr\u003e\u003ca href=\"\/products\/40231-qu40231-spicer-hub-sealing-lock-washer\" target=\"_blank\"\u003eQU40231\u003c\/a\u003e Sealing Washer \u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Metal Inner Hub Gasket \u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Outer Fiber Hub Gasket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC 3\/4 ton 4x4:\u003c\/strong\u003e\u003cbr\u003eK20, K25: 1972, 1973, 1974, 1975, 1976\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord F-250 3\/4 ton 4x4:\u003c\/strong\u003e\u003cbr\u003eClosed Knuckle Dana 44HD 3500# Axle: 1972, 1973, 1974, 1975\u003cbr\u003eOpen Knuckle Dana 44 Axle with 6 Bolt External Mount Spicer Hub: 1976, 1977, 1977.5\u003cbr\u003eCrew Cab with Dana 60 Closed Knuckle Axle: 1973, 1974, 1975\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41656797364301,"sku":"20114","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20114__51564_8299__67191.1707852878.1280.1280.jpg?v=1742503238"},{"product_id":"20156-qu20156-caliper-key-bolt-for-1976-1984-ford-f-series-bronco","title":"QU20156 Caliper Key Bolt for 1976-1984 Ford F-Series \u0026 Bronco","description":"\u003cp\u003e\u003cstrong\u003eQU20156 Caliper Key Bolt\u003c\/strong\u003e for 1976-1984 Ford F-Series and Bronco is a Genuine Ford OEM part with tapered shoulder and hex head.\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656805163085,"sku":"20156","price":11.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20156_1_1200_clean__38863_16452__61039.1707853581.1280.1280.jpg?v=1742503865"},{"product_id":"20253-qu20253-hub-cam-lock-ring","title":"QU20253 Hub Cam Lock Ring","description":"\u003cp\u003e\u003cstrong\u003eQU20253 Hub Cam Lock Ring\u003c\/strong\u003e fits in groove in \u003ca href=\"\/products\/9940406-qu40406-spicer-hub-cam-for-external-mount-front-hubs-on-ford-gm\" target=\"_blank\"\u003eQU40406 \u003c\/a\u003eHub Cam.\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656848777293,"sku":"20253","price":11.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu20253_1200_clean__50752_11923__85896.1707855342.1280.1280.jpg?v=1742505360"},{"product_id":"30198-tk30198-gold-heavy-duty-aluminum-replacement-spicer-d44-hub-dial","title":"TK30198 Gold Heavy-Duty Aluminum Replacement Spicer D44 Hub Dial","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"mimlogo.png\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"mimlogo.png\" width=\"50\"\u003e\u003cbr\u003eTK30198 Gold Torque King® Heavy-Duty Anodized Aluminum Replacement Hub Dial for GM 3\/4 ton Spicer 6 Bolt Lockout Hubs\u003c\/strong\u003e Our Torque King 3\/4 ton Dana 44 Replacement Lockout Hub Dial is a precision made, CNC machined anodized aluminum replacement Dial for the big, factory installed, 6 bolt, external mount Spicer lockout hubs used on 1972.5-1977.5 Chevy K20 and 1972.5-1977.5 GMC K25 3\/4 ton 4x4 trucks. These new Gold Dials are made for GM Hubs, but the Dial is functionally interchangeable with \u003ca href=\"\/products\/42053-tk42053-blue-anodized-aluminum-replacement-hub-dial-for-spicer-hubs\" target=\"_blank\"\u003eTK42053\u003c\/a\u003e Blue Dials for GM and \u003ca href=\"\/products\/40256-tk40256-red-torque-king-heavy-duty-replacement-hub-dial\" target=\"_blank\"\u003eTK40256\u003c\/a\u003e Red Dials for Ford. \u003cstrong\u003eSold Individually\u003c\/strong\u003e. USA Made.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/40471-tk40471-hub-dial-o-ring-spicer-plastic-hub-dials-in-ford-gm-3-4-tons\" target=\"_blank\"\u003eTK40471\u003c\/a\u003e Dial Sealing Ring and \u003ca href=\"\/products\/20112-qu20112-hub-dial-snap-ring-for-spicer-external-mount-hub-locks\" target=\"_blank\"\u003eQU20112\u003c\/a\u003e Dial Snap Ring.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWear\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eFitment\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eDana 44, Dana 60\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003ePlastic Dials\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003eMatching Parts\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWear\u003c\/strong\u003e\u003cbr\u003eThe usually reliable, original equipment Spicer Plastic Dial hubs were massive things, but they did have a weak spot with the Dial which may crack around the two small cross pin holes especially in cold weather or when the hubs are packed with excessive grease.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eTK30198 Yellow or Gold Dial will physically fit Spicer original equipment Ford and GM external mount lockout hubs that have the Plastic Dial in \u003ca href=\"\/products\/40546-qu40546uas-used-spicer-external-mount-lockout-hub-chrome-cap\" target=\"_blank\"\u003eQU40546\u003c\/a\u003e Chrome Outer Cap which is bolted to the truck with 6 \u003ca href=\"\/products\/40257-qu40257-allen-head-hub-bolt\" target=\"_blank\"\u003eQU40257\u003c\/a\u003e 3\/8 Hex Socket Bolts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDana 44, Dana 60\u003c\/strong\u003e\u003cbr\u003eSpicer made external mount Plastic Dial free-wheel Hub-Locks from 1972 to mid 1977. These Hubs were the factory original equipment parts for both to Ford and GM 3\/4 ton 4x4 trucks with Dana 44 front axles. They were also used on Ford F-250 Crew Cab trucks with Dana 60 closed knuckle front axles from 1974-1975. Most parts for these hubs have been out of production for decades so parts availability is becoming quite limited.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePlastic Dials\u003c\/strong\u003e\u003cbr\u003eOver the years we went through many hundreds of replacement hub dials for 1972-1977 Dana external mount hublocks. We sold the last plastic dial we had in the fall of 2015. Continued demand for replacement dials made it feasible to introduce our new TK30198 Heavy-Duty Anodized Aluminum Dial which is not only stronger than the original plastic dials, but also less expensive than what we paid for the last few plastic dials we could find.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMatching Parts for TK30198 Hub Dial are:\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"\/products\/20114-qu20114-spicer-hub-clutch-gear\" target=\"_blank\"\u003eQU20114\u003c\/a\u003e Hub Drive Gear \u003cbr\u003e\u003ca href=\"\/products\/9940918-qu40918-spicer-hub-dial-pin\" target=\"_blank\"\u003eQU40918\u003c\/a\u003e Hub Dial to Hub Cam Pin \u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring \u003cbr\u003e\u003ca href=\"\/products\/40546-qu40546uas-used-spicer-external-mount-lockout-hub-chrome-cap\" target=\"_blank\"\u003eQU40546\u003c\/a\u003e Outer Chrome Cap\u003cbr\u003e\u003ca href=\"\/products\/40547-qu40547-spicer-splined-hub-body\" target=\"_blank\"\u003eQU40547\u003c\/a\u003e Splined Hub Body \u003cbr\u003e\u003ca href=\"\/products\/9920109-qu20109-spicer-hub-axle-shaft-drive-gear-for-external-mount-hubs\" target=\"_blank\"\u003eQU20109\u003c\/a\u003e Axle Shaft Gear \u003cbr\u003e\u003ca href=\"\/products\/40471-tk40471-hub-dial-o-ring-spicer-plastic-hub-dials-in-ford-gm-3-4-tons\" target=\"_blank\"\u003eTK40471\u003c\/a\u003e Dial Sealing Ring \u003cbr\u003e\u003ca href=\"\/products\/20112-qu20112-hub-dial-snap-ring-for-spicer-external-mount-hub-locks\" target=\"_blank\"\u003eQU20112\u003c\/a\u003e Hub Dial Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/9940406-qu40406-spicer-hub-cam-for-external-mount-front-hubs-on-ford-gm\" target=\"_blank\"\u003eQU40406\u003c\/a\u003e Hub Cam \u003cbr\u003e\u003ca href=\"\/products\/40257-qu40257-allen-head-hub-bolt\" target=\"_blank\"\u003eQU40257\u003c\/a\u003e Hub Bolt \u003cbr\u003e\u003ca href=\"\/products\/40231-qu40231-spicer-hub-sealing-lock-washer\" target=\"_blank\"\u003eQU40231\u003c\/a\u003e Sealing Washer \u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Metal Inner Hub Gasket \u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Outer Fiber Hub Gasket \u003cbr\u003e\u003ca href=\"\/products\/40256-tk40256-red-torque-king-heavy-duty-replacement-hub-dial\" target=\"_blank\"\u003eTK40256\u003c\/a\u003e Red Torque King® Heavy-Duty Anodized Aluminum Replacement Hub Dial \u003cbr\u003e\u003ca href=\"\/products\/42053-tk42053-blue-anodized-aluminum-replacement-hub-dial-for-spicer-hubs\" target=\"_blank\"\u003eTK42053\u003c\/a\u003e Blue Torque King® Heavy-Duty Anodized Aluminum Replacement Hub Dial for GM\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003eSpecific to:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC 3\/4 ton 4x4\u003c\/strong\u003e\u003cbr\u003eK20, K25: 1972.5, 1973, 1974, 1975, 1976, 1977.5\u003c\/p\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003eFunctionally Interchangeable with Blue or Red Dials in:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC 3\/4 ton 4x4\u003c\/strong\u003e \u003cbr\u003eK20, K25: 1970, 1971, 1972.5\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord F-250 3\/4 ton 4x4:\u003c\/strong\u003e \u003cbr\u003eClosed Knuckle Dana 44HD 3500# Axle: 1972, 1973, 1974, 1975\u003cbr\u003eOpen Knuckle Dana 44 Axle with 6 Bolt External Mount Spicer Hub: 1976-1977.5\u003cbr\u003eCrew Cab with Dana 60 Closed Knuckle Axle: 1973, 1974, 1975\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656879743053,"sku":"30198","price":159.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/TK30198_1_clean__14889_19236__04300.1707857979.1280.1280.png?v=1742507392"},{"product_id":"40000-qu40000-dana-44-differential-pinion-mate-gear-thrust-washer","title":"QU40000 Dana 44 Differential Pinion Mate Gear Thrust Washer","description":"\u003cp\u003e\u003cstrong\u003eQU40000 Dana 44 Pinion Mate Thrust Washer\u003c\/strong\u003e is a genuine Dana hardened concave thrust washer that fits between each of the splined differential side gears in your Dodge Dana 44 open differential. Fits all Chevy, Dodge, Ford, GMC, International, and Jeep open differential Dana 44 front or rear axles. Also fits Dana 44 Trac-Loc differentials. Order 2 Thrust Washers per axle. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installation\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpider Gears\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eRing Gear Bolts\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eCoat both sides of the thrust washer with clean grease or petroleum jelly before installation to provide initial lubrication.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpider Gears\u003c\/strong\u003e\u003cbr\u003eMost people call the four small gears in a Dana 44 open differential \"Spider Gears\". The splined bigger gears are the Differential Side Gears. The two small gears held in place by the cross shaft are the Pinion Mate Gears. The Cross Shaft and Thrust Washers are subject to wear and should be replaced when doing any major differential service. Wear can be an be an issue on the gears themselves, but in most cases the \"Spider Gears\" will last the life of the vehicle unless they are subjected to sudden heavy shock loads or excessive power. Always use a new Cross Shaft Retaining Pin to hold the cross shaft in place.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRing Gear Bolts\u003c\/strong\u003e\u003cbr\u003eWith most ratios, you will have to remove the ring gear from the differential to take out the diff cross shaft. Ring Gear bolts are not reusable, so order \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003e\u003cspan\u003eS9978\u003c\/span\u003e \u003c\/a\u003eor \u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003e\u003cspan\u003eS24200\u003c\/span\u003e \u003c\/a\u003eThreadlocker and 10 \u003ca href=\"\/products\/40209-qu40209-dana-44-ring-gear-bolt\" target=\"_blank\"\u003e\u003cspan\u003eQU40209\u003c\/span\u003e \u003c\/a\u003eRing Gear Bolts along with your Thrust Washers.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts and Tools for QU40000 Dana 44 Pinion Mate Thrust Washer:\u003cbr\u003e\u003ca href=\"\/products\/40003-qu40003-differential-cross-shaft-for-dana-44-open-differentials\" target=\"_blank\"\u003e\u003cspan\u003eQU40003\u003c\/span\u003e \u003c\/a\u003eDifferential Cross Shaft\u003cbr\u003e\u003ca href=\"\/products\/40001-qu40001-differential-cross-shaft-retaining-pin-for-dana-30-and-dana-44\" target=\"_blank\"\u003e\u003cspan\u003eQU40001\u003c\/span\u003e \u003c\/a\u003eCross Shaft Retaining Pin\u003cbr\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003e\u003cspan\u003eQU40214\u003c\/span\u003e \u003c\/a\u003eDana 44 Cover Pan Gasket\u003cbr\u003e\u003ca href=\"\/products\/1097-qt1097-differential-master-bearings-for-dana-44-axles\" target=\"_blank\"\u003e\u003cspan\u003eQT1097\u003c\/span\u003e \u003c\/a\u003eDifferential Master Bearings\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003e\u003cspan\u003eQT1032\u003c\/span\u003e \u003c\/a\u003eDifferential Case Spreader\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eChevy, Dodge, Ford, GMC, International, Jeep Open Differential Dana 44 Front Axles or Rear Axles\u003cbr\u003e\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656927256653,"sku":"40000","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40000__43975_8992__15195.1707860594.1280.1280.jpg?v=1742509510"},{"product_id":"40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles","title":"QU40002 Outer Pinion Bearing Slinger Dana 25, 27, 30, 44, 50, 53 Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40002 Outer Pinion Bearing Slinger\u003c\/strong\u003e for Dana-Spicer Model 25, Model 27, Model 30, Model 44, Model 50, and Model 53 Drive Axles (front or rear). QU40002 is a genuine Dana-Spicer flat, stamped steel Slinger that fits most Model 53 and smaller Spicer drive axles except for the Model 35. This Slinger is installed between the outer pinion bearing and pinion yoke. USA Made.\u003c\/p\u003e \u003cp\u003eInteractive Exploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010DT 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWhen to Replace\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWhen to Replace\u003c\/strong\u003e\u003cbr\u003eQU40002 should be replaced if it is bent, or if the pinion yoke has worn a groove in it.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 CJ Dana 30\u003cbr\u003e1986 CJ Dana 44\u003cbr\u003e1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Wrangler (YJ) Dana 30 and Dana 44\u003cbr\u003e1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Wrangler (TJ) Dana 30 and Dana 44\u003cbr\u003e1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Cherokee (XJ) Dana 30\u003cbr\u003e1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 Cherokee (XJ) Dana 44\u003cbr\u003e1993, 1994, 1995, 1996, 1997, 1998 Grand Cherokee (ZJ) Dana 30\u003cbr\u003e1999, 2000, 2001, 2002, 2003, 2004 Grand Cherokee (WJ) Dana 30\u003cbr\u003e1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 SJ and J Series Dana 44\u003cbr\u003e1986, 1987, 1988, 1989, 1990, 1991, 1992, -1993 Comanche (MJ) Dana 44\u003cbr\u003e1995, 1996, 1997 Dana 50IFS\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656928206925,"sku":"40002","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40002_1200__15438_18839__10986.1707860616.1280.1280.png?v=1742509527"},{"product_id":"40003-qu40003-differential-cross-shaft-for-dana-44-open-differentials","title":"QU40003 Differential Cross Shaft for Dana 44 Open Differentials","description":"\u003cp\u003e\u003cstrong\u003eQU40003 Differential Cross Shaft\u003c\/strong\u003e for Dana 44 axles with open differentials.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656928763981,"sku":"40003","price":20.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40003__59389_8994__54152.1707860631.1280.1280.jpg?v=1742509544"},{"product_id":"40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8","title":"QU40004 4x4 Front 4 Slot Inner Spindle Nut with Pin Thread Size 1-5\/8\"","description":"\u003cp\u003e\u003cstrong\u003eQU40004 4x4 Front, 4 Slot Inner Spindle Nut with Pin\u003c\/strong\u003e is a genuine original equipment part for many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 closed knuckle front drive axles. This nut was used as the inner spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1980 to 1993, Jeep J-series full size 4x4s had it from 1973-1989. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eThread Diameter\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003ePin Engagement\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSocket\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThread Diameter\u003c\/strong\u003e\u003cbr\u003eQU40004 Spindle Nut fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePin Engagement\u003c\/strong\u003e\u003cbr\u003eThe pin that protrudes from the outboard face is an anti-rotation device that engages with one of the holes in either \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e or \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Spindle Lock Washers. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSocket\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMost SUVs\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC GM:\u003cbr\u003e\u003c\/strong\u003e1\/2 Ton \u0026amp; 3\/4 Ton Pickups with Dana 44 Front Axles\u003cbr\u003eGM 10 Bolt Front Axle\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge Dana 44 Front Axles:\u003c\/strong\u003e\u003cbr\u003e1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003e1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003e\u003c\/strong\u003eFord Bronco, Many Dana 30 1978-1979\u003cbr\u003eDana 44 Front Axles 1978-1979\u003cbr\u003eF-150, F-250 Crew Cab Dana 60 Closed Knuckle Front Drive Axles: 1973, 1974, 1975, 1976, 1977, 1978-1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series Full Size 4x4s with Dana 44 Front Axles:\u003c\/strong\u003e\u003cbr\u003e1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656929779789,"sku":"40004","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40004_clean__38386.1728498941.1280.1280.png?v=1742509568"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/1976-1977.5-ford-f250-dana-44-front-axle-id-1200__61628_c72278c7-346a-435e-a973-235c5038ae2c.jpg?v=1773182432","url":"https:\/\/torqueking.com\/collections\/1976-1977-5-ford-f250-dana-44-front-axle.oembed?page=10","provider":"Torque King 4x4","version":"1.0","type":"link"}