{"title":"1971-1975 IHC Series Dana 44 Open Front Axle","description":"\u003cp\u003eShop now for Parts and Tools specific to 1971-1975 IHC 1\/2 ton and 3\/4 ton trucks with Open Knuckle Dana 44 Front Axles. Great selection. In stock. Quick shipping.\u003c\/p\u003e\n\u003cp\u003eInternational first used Dana 44 Open Knuckle Front Axles in 1971 for 1972 model year 1110 and 1210 4x4s. The 1972-1973 IHC Axle Codes for the 1\/2 ton Dana 44 axles with Drum Brakes is 02046 or FA46. The 3\/4 tons are designated 02045 or FA45. For 1974-1975 Disc Brake equipped 100 and 150 series 1\/2 ton 4x4s, the Axle Codes 02062 or FA62. 1974-1975 3\/4 ton 200 Series trucks use a Code 02063 or FA63.\u003c\/p\u003e\n\u003cp\u003eWe stock the standard service parts for these axles such as bearings, seals, ball joints, diff parts etc. The IHC specific parts like wheel hubs and axles are now mostly either out of production or in limited production, but often we do have both New Old Stock (NOS) and used parts on the shelf.\u003c\/p\u003e","products":[{"product_id":"1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles","title":"QT1041 Inner Axle Shaft Seal Installer with Depth Stop for Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"mimlogo.png\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.png\" title=\"mimlogo.png\" width=\"50\"\u003e\u003cbr\u003eQT1041 Inner Front Axle Shaft Oil Seal Installer for Dana 44 Front Axles \u003c\/strong\u003e installs the \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e current design original equipment CR made seal in many older 4x4 trucks with Dana-Spicer Model 44 axles. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time. Our custom, CNC Precision Machined, solid steel Seal Installer support these difficult to install seals in 3 locations so the seal cannot cock or get crushed during installation. (Also see \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e). Included in \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Kit and \u003ca href=\"\/products\/4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set\" target=\"_blank\"\u003eTS4871\u003c\/a\u003e Tool Set. Made in U.S.A. by Us Here in Montana.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*Important Note: Our custom Tool is made specifically for the \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e current design original equipment CR made seal. It most likely will NOT fit other make seals! We make our Tool EXACT so it will fit the seal and install super easy \u0026amp; perfectly in the axle housing. We like a professional installation in super quick time with no 'do overs'.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003ePrep\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003eBenefit of Custom Tool\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eFixed Depth Installer\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePrep:\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace the axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBenefit of Custom Tool:\u003c\/strong\u003e\u003cbr\u003eInstalling Dana 44 Inner Axle Shaft Oil Seals without damaging the seal, your axle housing, or your fingers can be difficult UNLESS you have the correct tools for the job. Combine this seal installer with our \u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Press Screw Assembly and \u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Thrust Plate, and you will quickly and easily install those pesky oil seals without mashing your fingers or cussing a blue streak! Plus the Seal will be installed right the first time, with no warranty comebacks!!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFixed Depth Installer:\u003c\/strong\u003e\u003cbr\u003eWe make two types of Seal Installers: Adjustable Depth and Fixed Depth. The QT1041 Installer on this page is a Fixed Depth Installer that will firmly stop at a preset depth (no measuring involved). Choose this Fixed Depth Installer if you want quick, fool-proof seal installation. Choose our \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Adjustable Depth Seal Installer if you want the flexibility to offset the seals to miss grooves worn in your axle shafts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seal\u003cbr\u003e\u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Inner Axle Seal Kit (includes 2 Seals, 1 for each side)\u003cbr\u003e\u003ca href=\"\/products\/4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set\" target=\"_blank\"\u003eTS4871\u003c\/a\u003e Inner Axle Seal Tool Set (no seals)\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications with Dana 44 Front Axle:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972.5, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250: 1967, 1968, 1969\u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC: \u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971.5, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655860854861,"sku":"1041","price":72.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1041_1200_clean__29660_12042__53623.1707817440.1280.1280.jpg?v=1742469822"},{"product_id":"1813-qt1813-knuckle-bearing-or-king-pin-bearing-cup-installer-for-dana-44hd-60-70","title":"QT1813 Knuckle Bearing or King Pin Bearing Cup Installer for Dana 44HD, 60, 70","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQT1813 King Pin or Knuckle Bearing Cup Installer for Dana 44HD, 60, 61, 70 and 1943-1971 Dodge Power Wagon Front Axles\u003c\/strong\u003e is used to install \u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" target=\"_blank\"\u003eQU50601 \u003c\/a\u003eor Timken 23256 Steering Knuckle Bearing Cups in 1958-1982 closed knuckle Dana 44HD, Dana 60, Dana 70 front axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s PLUS 1943-1971 Dodge Civilian and military Power Wagon 8-3\/4\" and 9-5\/8\" Closed Knuckle front axles. QU1813 is also the correct tool to drive in the Lower King Pin Bearing Cups for \u003cstrong\u003e1975-1993\u003c\/strong\u003e Dana 60 and Dana 61 king pin type \u003cstrong\u003eopen knuckle\u003c\/strong\u003e front axles in Chevy, Dodge, Ford, GMC, and International heavy-duty 4x4 trucks. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eProduct Note\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eTool Handles\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003eUsing a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool Handles\u003c\/strong\u003e\u003cbr\u003eI recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for Knuckle Bearing Cup Installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eK20, K25 Dana 44HD Closed Knuckle Axle: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e\u003cbr\u003eW200 Dana 44HD Closed Knuckle Front Axle: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eW-250HD, W-350 Dana 60 King Pin Type Open Knuckle Front Axle: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW250HD and W-350 Dana 61 King Pin Type Open Knuckle Front Axle: 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e W-300 Dana 70 Closed Knuckle Front Axle: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 \u003cbr\u003eW-600 Dana 70 Closed Knuckle Front Axle: 1974, 1975, 1976, 1977, 1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003e F-250 Dana 44HD Closed Knuckle Front Axle: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e F-250 Crew Cab Dana 60 Closed Knuckle Front Axle: 1974, 1975\u003cbr\u003e F-250 Dana 60 King Pin Type Open Knuckle Front Axle: 1976, 1977, 1978, 1979\u003cbr\u003eF-350 Dana 60 King Pin Type Open Knuckle Front Axle: 1976, 1977, 1978, 1979, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational\u003c\/strong\u003e\u003cbr\u003e Dana 44HD Closed Knuckle: 3\/4 and 1 ton 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e 1300 Camper Special Dana 60 King Pin Type Open Knuckle Front Axle: 1975\u003cbr\u003e 1400, 1600 Dana 70 Closed Knuckle Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e\u003cbr\u003e M715, M725, M726 1-1\/4 ton Military Dana 60 Closed Knuckle Front Axle: 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative\"\u003e\u003ciframe allowfullscreen=\"\" height=\"240\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" width=\"320\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e \u003cscript src=\"https:\/\/player.vimeo.com\/api\/player.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656069652557,"sku":"1813","price":26.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT1813_clean__21672_25019__36129.1707820707.1280.1280.png?v=1742473740"},{"product_id":"1802-qt1802-bearing-cup-installer-2-7-8-approximate-outside-diameter","title":"QT1802 Bearing Cup Installer 2-7\/8\" Approximate Outside Diameter","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e QT1802 Bearing Cup Installer \u003c\/strong\u003eis specifically machined to fit QU10142, QU10145, QU50447, QU50629, and QU50653 bearing cups commonly used in axle, transmission and wheel applications. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5\/8\" tip. Made in Montana, U.S.A.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUsing Installer\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eAvailable Handles\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"#note3\"\u003eCompatible with Timken\u003c\/a\u003e\u003c\/strong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUsing Installer\u003c\/strong\u003e\u003cbr\u003e Using a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools. See \u003ca href=\"#video\"\u003eVideo\u003c\/a\u003e below.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAvailable Handles\u003c\/strong\u003e\u003cbr\u003e I recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for most applications and a 14\" handle (\u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e) for deep set inner pinion, rear hub and transmission bearing cups.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCompatible with Timken Numbers\u003c\/strong\u003e\u003cbr\u003e QT1802 is compatible with these Timken or industry standard bearing cups: LM102910, LM102910P, LM501310, LM501310P, and LM501314\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e \u003cspan style=\"color: #ff6600\"\u003eUse QT1802 Cup Installer for These Transmission Countershaft Front Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll with NV4500 5 Speed Manual Transmission (MW3, MT8 codes): 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e:\u003cbr\u003e All Ram 2500, Ram 3500 with NV4500 and NV4500HD 5 Speed Manual Transmission: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff00ff\"\u003eUse QT1802 Cup Installer for These Front Inner Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eIHC\u003c\/strong\u003e:\u003cbr\u003eScout: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e:\u003cbr\u003eCJ5, CJ6, CJ, CJ7, CJ8: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e All Jeepster Commando and Scrambler \u003cbr\u003e J Series Light Duty: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #008000\"\u003eUse QT1802 Cup Installer for These Front Outer Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e: \u003cbr\u003e Full Size Blazer\/ Jimmy and Suburban: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e 1\/2 Ton K10\/15\/K1500\/V1500: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003e 3\/4 Ton K20\/25\/2500\/V2500: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e: \u003cbr\u003e Bronco: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e F100, F150: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e F250 Model 44 Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003e W100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003e W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e W250 (Gas): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC\u003c\/strong\u003e: \u003cbr\u003e Scout: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e: \u003cbr\u003e CJ5, CJ6, CJ7, CJ8: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e All Jeepster Commando and Scrambler \u003cbr\u003e J-Series Full Size Cherokee, Wagoneer, Pickup, FC150: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eToyota\u003c\/strong\u003e:\u003cbr\u003eLandcruiser, 4 Runner and Pickup: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff\"\u003eUse QT1802 Cup Installer for These Rear Outer Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eToyota:\u003c\/strong\u003e\u003cbr\u003e Landcruiser with full float rear axle: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 192, 1993, 1994, 1995, 1996, 1997\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative\"\u003e\u003ciframe allowfullscreen=\"\" height=\"240\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" width=\"320\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e \u003cscript src=\"https:\/\/player.vimeo.com\/api\/player.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656081743949,"sku":"1802","price":32.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1802_1_1200_clean__63711_16535__19685.1707821136.1280.1280.jpg?v=1742474029"},{"product_id":"1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles","title":"QT1161 Seal Installer Thrust Plate for Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQT1161 Seal Installer Thrust Plate for 1955-2006 Dana 44 Front Axles\u003c\/strong\u003e is used with \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Press Screw and the correct Seal Installer for your axle to install the inner axle shaft oil seals in 1955-2006 Dana 44 4x4 solid beam front axles without vacuum controlled Central Axle Disconnect. Applications include Chevy\/GMC 1960-1980, Dodge 1957-1984, Ford 1959-1979, IHC 1955-1980, and Jeep J-Series 1962-1991, and Jeep Wrangler Rubicon 2003-2006. Made in U.S.A. by Us Here in Montana.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMust be Removed\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMust be Removed\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace the axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eThrust Plate fits against Differential Bore Face when pressing in opposite axle seal. (Thrust Plate has 5\/8\" ID center hole.)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJ-Series Dana 44 Front Axles: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eWrangler Rubicon Dana 44 Front Axles: 2003, 2004, 2005, 2006\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656112513101,"sku":"1161","price":41.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1161__53255_7535__94303.1707821970.1280.1280.jpg?v=1742474643"},{"product_id":"1508-qt1508-front-wheel-seal-installer-for-ihc-scout-jeep-cj-scrambler","title":"QT1508 Front Wheel Seal Installer for IHC Scout, Jeep CJ \u0026 Scrambler","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1508 Front Wheel Seal Installer for IHC Scout and Jeep CJ\u003c\/strong\u003e is specifically made to install \u003ca href=\"\/products\/50225-qu50225-inner-front-wheel-seal-for-ihc-1-2-ton-truck-scout-jeep-cj\" target=\"_blank\"\u003eQU50225\u003c\/a\u003e, \u003ca href=\"\/products\/15015-qu15015-inner-front-wheel-seal-for-1981-1983-jeep-cj-scrambler\" target=\"_blank\"\u003eQU15015\u003c\/a\u003e, and \u003ca href=\"\/products\/15016-qu15016-inner-front-wheel-seal-for-1984-1986-jeep-cj-scrambler\" target=\"_blank\"\u003eQU15016\u003c\/a\u003e inner wheel seals to the correct depth without damaging the seal. Applications include 1973-1980 Scout models and to mid 1976-1986 Jeep CJs with Disc Brakes. A relief groove in the installer allows adequate clearance for the outer seal lip, thereby preventing one of the most common causes of premature seal failure. Aluminum Installer is Made in U.S.A. by us here in Roberts, Montana.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eLubricate\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eDriver Handles\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubricate\u003c\/strong\u003e\u003cbr\u003eAfter the seal is installed, lubricate the seal lip with clean wheel bearing grease.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e \u003cstrong\u003eDriver Handles\u003c\/strong\u003e\u003cbr\u003eQT1508 has a 5\/8\" center hole for attaching Installer to \u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e, or \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e Driver Handles.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003eScout II with Front Disc Brakes: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ with Front Disc Brakes: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eScrambler: 1981, 1982, 1983, 1984, 1985, 1986\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656118771789,"sku":"1508","price":27.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1508-a2-clean-1280__23937_25981__97272.1707822149.1280.1280.jpg?v=1742474762"},{"product_id":"1075-qt1075-1-2-drive-ball-joint-adjuster-sleeve-socket-for-dana-30-dana-44-gm-10-bolt-roxor","title":"QT1075 1\/2\" Drive Ball Joint Adjuster Sleeve Socket for Dana 30, Dana 44, GM 10 Bolt, Roxor","description":"\u003cp\u003e\u003cstrong\u003eQT1075 1\/2\" Drive Ball Joint Adjuster Sleeve Socket\u003c\/strong\u003e for a host of domestic 4x4s from 1969 to 1993. QT1075 also fits 2018 and newer Mahindra Roxor 4x4s. Chevy, Dodge, Ford, GMC, International, Jeep all used the \u003ca href=\"\/products\/40187-qu40187-original-equipment-ball-joint-set-for-4x4-front-axles\" target=\"_blank\"\u003eQU40187\u003c\/a\u003e Ball joints on just about every 4x4 they sold with Dana 30, Dana 44, or GM 10 Bolt solid beam axles with serviceable wheel bearings. The USA Made 1\/2\" Drive design of the QT1075 attaches directly to your ratchet or breaker bar making it the easiest to use and most effective Ball Joint Spanner Socket on the market. Cheaper, competitive sockets with a hex body means you have to add a hex socket to drive the ball joint socket. Sounds OK, but the added link makes it very difficult to put direct downward pressure on the socket as you try to turn it. When servicing your vintage 4x4, use the same 1\/2\" Drive socket design Dan the Gear Man has relied upon for over 45 years! Not for Impact Use.\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eUpper Ball Joint Stud\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eLocation\u003c\/strong\u003e\u003c\/a\u003eng\u0026gt;Location The Ball Joints are pressed into the steerin\u003ca href=\"#note3\"\u003e\u003cstrong\u003eQU40187 Includes\u003c\/strong\u003e\u003c\/a\u003eint Set Inc\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eThreaded Adjuster\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed Mor\u003ca href=\"#note4\"\u003e\u003cstrong\u003eThreaded Adjuster\u003c\/strong\u003e\u003c\/a\u003epecific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUpper Ball Joint Stud\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eLocation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eQU40187 Includes\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Upper Ball Joint Stud\u003c\/strong\u003e\u003cbr\u003eFor removal, the upper ball joint stud needs to be driven down to free it BEFORE you try to loosen the adjuster with QT1075 special 1\/2\" drive spanner socket.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLocation\u003c\/strong\u003e\u003cbr\u003eThe Ball Joints are pressed into the steering knuckle so the knuckle needs to be removed from the vehicle in order to replace the Ball Joints.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eQU40187 Includes\u003c\/strong\u003e\u003cbr\u003eEach \u003ca href=\"\/products\/40187-qu40187-original-equipment-ball-joint-set-for-4x4-front-axles\" target=\"_blank\"\u003eQU40187\u003c\/a\u003e Ball Joint Set Includes 1 Each:\u003cbr\u003e Upper Ball Joint, Upper Ball Joint Threaded Adjuster, Upper Ball Joint Nut, Cotter Key for Upper Ball Joint\u003cbr\u003e Lower Ball Joint, Lower Ball Joint Lock Nut, Lower Ball Joint Snap Ring\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThreaded Adjuster\u003c\/strong\u003e\u003cbr\u003eThe Threaded Adjuster is installed in the Axle Yoke AFTER the Lower Ball Joint Nut is tightened. Apply \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" target=\"_blank\"\u003eS9975\u003c\/a\u003e or \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" target=\"_blank\"\u003eS81343\u003c\/a\u003e Anti-Seize Compound to the Adjuster Threads. Torque the Adjuster to 50 lb.-ft. with QT1075 special 1\/2\" drive spanner socket.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(partial listing)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll K5 Blazer, Jimmy, K10, K15, K1500, V1500, K20, K25, K2500, V2500 with Dana 44 or GM 10 Bolt: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eAll Ramcharger, Trailduster, W100, W150, W200, W250 with open knuckle Dana 44 Axles: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco, F-100, F150: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF-250 with open knuckle Dana 44 Axles: 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1100, 1200 with Dana 44 open knuckle front axles: 1971, 1972, 1973, 1974, 1975\u003cbr\u003eScout and Scout Based Vehicles: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ-5, CJ-6, CJ-7, Scrambler: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003cbr\u003eJ-Series Full Size Cherokee, Cherokee Chief, Grand Wagoneer, 1\/2 ton \u0026amp; 3\/4 ton Trucks, Wagoneer: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMahindra:\u003c\/strong\u003e\u003cbr\u003eRoxor 4x4: 2018, 2019, 2020, 2021, 2022, 2023\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656222285901,"sku":"1075","price":94.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/clean_1__65791.1721678534.1280.1280.png?v=1742477506"},{"product_id":"4911-tk4911-master-wheel-bearing-seal-tools-kit-for-vintage-dana-30-44","title":"TK4911 Master Wheel Bearing, Seal, Tools Kit for Vintage Dana 30\/44","description":"\u003cp\u003e\u003cstrong\u003eTK4911 \u003cem\u003eTorque King\u003c\/em\u003e® Master Wheel Bearing and Seal Kit with Tools for Vintage Dana 30 and Dana 44 Front Axles\u003c\/strong\u003e fits many 1959-1976 Chevy, Dodge, Ford, GMC, IHC, and Jeep with with either Dana 30 or Dana 44 axles, Internally Splined Wheel Hubs, and Drum Brakes. Also fits 1971 GM 1\/2 ton 4x4s with Disc Brakes. TK4911 Master Kit includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer and Driver Handle.\u003c\/p\u003e \u003cp\u003eDon't Need the Tools? See: \u003ca href=\"\/products\/4912-tk4912-torque-king-wheel-bearing-and-seal-kit-for-dana-30-dana-44\" target=\"_blank\"\u003eTK4912 \u003c\/a\u003eParts Only Kit\u003cbr\u003eNeed just the Bearings? See: \u003ca href=\"\/products\/134905-tk4905-torque-king-wheel-bearing-kit\" target=\"_blank\"\u003eTK4905\u003c\/a\u003e Bearings Only Kit\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eLubricate\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eFits \u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003e1972 GM\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eTK4911 Master Kit includes:\u003cbr\u003e(2) \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003eWheel Seal\u003cbr\u003e(2) \u003ca href=\"\/products\/50578-qu50578-timken-tapered-wheel-or-diff-bearing\" target=\"_blank\"\u003eQU50578 \u003c\/a\u003eTimken Inner Wheel Bearing\u003cbr\u003e(2) \u003ca href=\"\/products\/50577-qu50577-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50577 \u003c\/a\u003eTimken Inner Wheel Bearing Cup\u003cbr\u003e(2) \u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447 \u003c\/a\u003eTimken Outer Wheel Bearing Cup\u003cbr\u003e(2) \u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/1802-qt1802-bearing-cup-installer-2-7-8-approximate-outside-diameter\" target=\"_blank\"\u003eQT1802 \u003c\/a\u003eOuter Wheel Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1803-qt1803-front-inner-wheel-taper-bearing-cup-installer\" target=\"_blank\"\u003eQT1803 \u003c\/a\u003eInner Wheel Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1504-qt1504-dana-30-dana-44-and-gm-10-bolt-front-wheel-seal-installer\" target=\"_blank\"\u003eQT1504 \u003c\/a\u003eWheel Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\"\u003eQT1100 \u003c\/a\u003eDriver Handle\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubricate\u003c\/strong\u003e\u003cbr\u003eYour New Wheel Bearings must be packed and the wheel seal lip lubricated with NLGI #2 Grease before placing these parts in service.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eTK4911 fits 1960-1971 Chevy or GMC 1\/2 ton, 1969-1974 Dodge W100, 1959-1969.5 Ford F100, F250 (standard axle), 1966-1969.5 Ford Bronco, 1964-1973 IHC 1100 1\/2 ton, and 1974-1976 Front Drum Brake equipped Jeep Wagoneer, Cherokee, and J10 truck. \u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1972 GM\u003c\/strong\u003e\u003cbr\u003eSome aftermarket sources list \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003eseal being used as late as 1972, however, my 1972 era Chevy parts book only lists it up to 1971. Disc brakes became standard in 1971 which means hub temperatures are higher than they usually are with drum brakes. Effective with the 1972 model year, the simple \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003eseal was replaced by \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003edouble lip spring seal. My 1967-1972 GMC parts book (which was printed in 1976) shows \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eas the seal to use for both 1971 and 1972. I always installed \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eseal in all GM 1\/2 ton disc brake hubs including 1971. For drum brake applications, I used QU50654 due to a thickness difference that can lead to interference problems with some drum brake hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for TK4911 Master Wheel Bearing\/Seal\/Tools Kit:\u003cbr\u003e\u003ca href=\"\/products\/20267-tka20267-torque-king-dana-44-closed-knuckle-front-spindle\" target=\"_blank\"\u003eTKA20267 \u003c\/a\u003eSpindle for Closed Knuckle Axles\u003cbr\u003e\u003ca href=\"\/products\/40630-qu40630-dana-44-bare-front-spindle-for-open-knuckle-drum-brake-axles-reference-only\" target=\"_blank\"\u003eQU40630 \u003c\/a\u003eSpindle for 1966-1972 Ford and 1969-1970 GM Open Knuckle Axles with Drum Brakes\u003cbr\u003e\u003ca href=\"\/products\/5542103-qu42103u-used-front-spindle-for-1972-1974-dodge-w100-dana-44\"\u003eQU30197U \u003c\/a\u003eSpindle for 1971 GM with Disc Brakes\u003cbr\u003e\u003ca href=\"\/products\/5542103-qu42103u-used-front-spindle-for-1972-1974-dodge-w100-dana-44\" target=\"_blank\"\u003eQU42103U \u003c\/a\u003eUsed Spindle for 1972-1974 Dodge W100\u003cbr\u003e\u003ca href=\"\/products\/9942008-tk42008-torque-king-bare-front-spindle-for-1973-1976-ford-jeep\" target=\"_blank\"\u003eTK42008 \u003c\/a\u003eSpindle for Jeep\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003eDouble Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003ePyroplex Synthetic Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer\u003cbr\u003e\u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i \u003c\/a\u003eImport Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025 \u003c\/a\u003eUniversal Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003ePyroplex ES Synthetic Grease\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003cbr\u003e \u003c\/strong\u003eK5 Blazer, K5 Jimmy, 1\/2 ton Pickups with Drum Front Brakes: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003e 1971 Can also use for 1971 Models with Disc Brakes, instead of TK4711 or TK4746\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100 with Dana 44 Closed Knuckle Front Axle: 1969, 1970, 1971\u003cbr\u003eW100 with Drum Brake Dana 44 Front Axle: 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco Dana 30 Axle: 1966, 1967, 1968\u003cbr\u003eBronco Dana 30 Axle up to serial #F30000: 1969.5\u003cbr\u003eF100 closed knuckle Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF100 open knuckle Dana 44: 1966, 1967, 1968\u003cbr\u003eF100 open knuckle Dana 44 up to serial number F70000: 1969\u003cbr\u003eF-250 closed knuckle Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003eF-250 closed knuckle Dana 44 up to serial number F70000: 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1100 with Front Drum Brakes: 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eWagoneer, Cherokee, J10 with Drum Front Brakes: 1974, 1975, 1976\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656296636493,"sku":"4911","price":289.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/4695625389479917567_49963__52154_677__24053.1707828231.1280.1280.jpg?v=1778722802"},{"product_id":"4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set","title":"QK4918 Hub Service Kit for QU56018 Warn Manual Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQK4918 Hub Service Kit\u003c\/strong\u003e for \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Manual Hub Set.\u003c\/p\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":41656299847757,"sku":"4918","price":66.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4918_1600__41065.1721237300.1280.1280.png?v=1742481179"},{"product_id":"4954-qk4954-hub-service-kit-for-qu51181-warn-premium-manual-hub-set","title":"QK4954 Hub Service Kit for QU51181 Warn Premium Manual Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQK4954 Hub Service Kit\u003c\/strong\u003e for \u003ca href=\"\/products\/51181-qu51181-warn-20990-premium-hub-set-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU51181\u003c\/a\u003e Warn Premium Manual Hub Set on Dana 44 and GM 10 bolt front axles.\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656307384397,"sku":"4954","price":60.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4954_clean__10221_7430__40608.1707828865.1280.1280.jpg?v=1742481730"},{"product_id":"11164-qu11164-1-3-4-thread-spindle-hex-nut-for-dodge-ihc-jeep-dana-44","title":"QU11164 1-3\/4 Thread Spindle Hex Nut for Dodge, IHC, Jeep Dana 44","description":"\u003cp\u003e\u003cstrong\u003e QU11164 1-3\/4 Thread Spindle Hex Nut for Dodge, International, and Jeep Dana 44 Front Axles\u003c\/strong\u003e is an original equipment spec case hardened spindle nut that fits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3\/4\" spindle threads and external mount wheel hubs. Hex size is 2-1\/2\". Use 2 per side, 4 per vehicle. USA Made. Sold individually.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e1.75” Thread\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e This Spindle Nut fits 1957-1974 Dodge, 1956-1975 International, and 1968-1973 Jeep trucks with front spindles that have 1-3\/4' threads and wheel hubs that are drilled and tapped with 6 3\/8\" holes in a 3-3\/4\" bolt circle to mount an external drive flange or lockout hub. Also used for 1966-1975 IHC Dana 60 rear axle applications. \u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e washer is NOT used on 1964-1975 International 1\/2 ton 4x4s or 1969-1974 Dodge W-100 4x4 trucks with 3-3\/8\" diameter internally splined wheel hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1.750” Thread\u003c\/strong\u003e\u003cbr\u003e International and Jeep truck year and model application information is often difficult to precisely list due to the relatively low production numbers and the fact that both manufacturers often built special purpose vehicles for government and vocational applications. Regardless of the application information, if you have a front spindle with 1.750\" thread, QU11164 is the correct part for your 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/11165-qu11165-nla-inner-spindle-thrust-washer-dana-44-front-axles\" target=\"_blank\"\u003eQU11165\u003c\/a\u003e Spindle Nut Thrust Washer\u003cbr\u003e\u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e Spindle Lock Washer (goes between outer and and inner spindle nuts)\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Gasket for Lockout Hub or Drive Flange\u003cbr\u003e\u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704\u003c\/a\u003e Front Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701\u003c\/a\u003e Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702\u003c\/a\u003e Wheel Bearing 1-3\/4\" ID\u003cbr\u003e\u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703\u003c\/a\u003e Wheel Bearing 1-13\/16\" ID \u003cbr\u003e\u003ca href=\"\/products\/4924-tk4924-early-front-wheel-bearing-seal-gasket-kit-for-dana-44-axles\" target=\"_blank\"\u003eTK4924\u003c\/a\u003e Front Wheel Bearing Kit 1957-1968 Dodge and 1956-1971.5 IHC\u003cbr\u003e\u003ca href=\"\/products\/4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late\" target=\"_blank\"\u003eTK4926\u003c\/a\u003e Front Wheel Bearing Kit 1969-1974 Dodge, IHC, and 1968-1973 Jeep\u003cbr\u003e\u003ca href=\"\/products\/1013-qt1013-usa-made-1-2-drive-x-2-5-hex-thin-wall-spindle-nut-socket\" target=\"_blank\"\u003eQT1013\u003c\/a\u003e 2-1\/2\" Hex Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e \u003cstrong\u003eDodge:\u003cbr\u003e\u003c\/strong\u003e W100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 \u003cbr\u003e W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e 100, 1100 1\/2 ton with 6 bolt, external mount hub with 3-3\/4\" bolt circle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963\u003cbr\u003e 120, 1200 3\/4 ton: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003e IHC Dana 60 Rear Axle: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e J4000 with 8000 pound GVW including Camper Special: 1968, 1969, 1970\u003cbr\u003e J4800 with 8000 pound GVW including Camper Special: 1971, 1972, 1973\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656588697677,"sku":"11164","price":29.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11164_1200_clean__87705_11602__26360.1707837905.1280.1280.jpg?v=1742489369"},{"product_id":"11165-qu11165-nla-inner-spindle-thrust-washer-dana-44-front-axles","title":"QU11165 NLA Inner Spindle Thrust Washer Dana 44 Front Axles","description":"\u003cp\u003eDISCONTINUED\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQU11165 Spindle Thrust Washer for Dodge, International, and Jeep Dana 44 Front Axles \u003c\/strong\u003efits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3\/4\" hex spindle nuts and external mount wheel hubs. One of these washers is used on each side between the outer wheel bearing and inner spindle nut. Sold individually.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eTab\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e1.750\" Thread Spindle\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eThis Thrust Washer fits 1957-1974 Dodge, 1956-1975 International, and 1968-1973 Jeep trucks with front spindles that have 1-3\/4' threads and wheel hubs that are drilled and tapped with 6 3\/8\" holes in a 3-3\/4\" bolt circle to mount an external drive flange or lockout hub. \u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576 \u003c\/a\u003ewasher is NOT used on 1964-1975 International 1\/2 ton 4x4s or 1969-1974 Dodge W-100 4x4 trucks with 3-3\/8\" diameter internally splined wheel hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTab\u003c\/strong\u003e\u003cbr\u003eQU11165 Spindle Thrust Washer has an internal tab that fits a 1\/4\" spindle key slot. It is not uncommon to find a spindle with slightly mashed threads at the outboard end which will reduce the slot width. If present, this condition will need to be fixed before you can install the thrust washer.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1.750\" Thread Spindle\u003c\/strong\u003e\u003cbr\u003eInternational and Jeep truck year and model application information is often difficult to precisely list due to the relatively low production numbers and the fact that both manufacturers often built special purpose vehicles for government and vocational applications. Regardless of the application information, if you have a front spindle with 1.750\" thread, QU11165 is the correct part for your 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU11165 Spindle Nut Thrust Washer:\u003cbr\u003e\u003ca href=\"\/products\/11164-qu11164-1-3-4-thread-spindle-hex-nut-for-dodge-ihc-jeep-dana-44\" target=\"_blank\"\u003eQU11164\u003c\/a\u003e Hex Spindle Nut with 1-3\/4\" Thread\u003cbr\u003e\u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e Spindle Lock Washer (goes between outer and and inner spindle nuts)\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Gasket for Lockout Hub or Drive Flange\u003cbr\u003e\u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704\u003c\/a\u003e Front Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701\u003c\/a\u003e Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702\u003c\/a\u003e Wheel Bearing 1-3\/4\" ID\u003cbr\u003e\u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703\u003c\/a\u003e Wheel Bearing 1-13\/16\" ID \u003cbr\u003e\u003ca href=\"\/products\/4924-tk4924-early-front-wheel-bearing-seal-gasket-kit-for-dana-44-axles\" target=\"_blank\"\u003eTK4924\u003c\/a\u003e Front Wheel Bearing Kit 1957-1968 Dodge and 1956-1971.5 IHC\u003cbr\u003e\u003ca href=\"\/products\/4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late\" target=\"_blank\"\u003eTK4926\u003c\/a\u003e Front Wheel Bearing Kit 1969-1974 Dodge, IHC, and 1968-1973 Jeep\u003cbr\u003e\u003ca href=\"\/products\/1013-qt1013-usa-made-1-2-drive-x-2-5-hex-thin-wall-spindle-nut-socket\" target=\"_blank\"\u003eQT1013\u003c\/a\u003e 2-1\/2\" Hex Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003eW200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e100, 1100 1\/2 ton with 6 bolt, external mount hub with 3-3\/4\" bolt circle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963\u003cbr\u003e120, 1200 3\/4 ton: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJ4000 with 8000 pound GVW including Camper Special: 1968, 1969, 1970\u003cbr\u003eJ4800 with 8000 pound GVW including Camper Special: 1971, 1972, 1973\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656588795981,"sku":"11165","price":23.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11165__70856_8041__05434.1707837923.1280.1280.jpg?v=1742489379"},{"product_id":"15029-qu15029-warn-9062-external-mount-6-bolt-27-spline-lockout-hub-set","title":"QU15029 Warn 9062 External Mount, 6 Bolt, 27 Spline Lockout Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU15029 Warn 9062 External Mount, 6 Bolt, 27 Spline Premium Lockout Hubs Set\u003c\/strong\u003e for Jeep and Scout.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003eScout II: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ5: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eCJ6: 1972, 1973, 1974, 1975\u003cbr\u003eCJ7: 1976, 1977, 1978, 1979, 1980\u003cbr\u003eJeepster: 1972, 1973\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656635162701,"sku":"15029","price":314.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15029_1200_clean__22511_14079__63682.1707843285.1280.1280.jpg?v=1742493898"},{"product_id":"4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set","title":"QK4647 4x4 Front Inner Axle Seal Remover Tool Set","description":"\u003cp\u003e\u003cstrong\u003eQK4647 Front Axle Inner Oil Seal Remover Set with 1-3\/4\" Driver Tip\u003c\/strong\u003e for many common front inner axle oil seals is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube inside diameters of 1-3\/4\" or larger and axle shaft seal inside diameters of 1-1\/2\" or smaller. This handy tool knocks out those tricky inner axle shaft seals in a flash! In addition, QK4647 lets you easily remove the 1-9\/16\" ID oil bath type front axle shaft oil seals on 1999-2004 Ford Super Duty and 2000-2005 Ford Excursion 4x4s without removing or damaging the fragile plastic axle tube guides. Space saving, two piece rod, threads together for removing the long side seal. Use just the long rod for knocking out the short side seal. For axles with axle tube  inside diameters of under 1-3\/4\", use the nut as your remover tip. Kit includes \u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e drive rod, \u003ca href=\"\/products\/1151-qt1151-short-extension-drive-rod-for-inner-axle-seal-removal\" target=\"_blank\"\u003eQT1151\u003c\/a\u003e extension rod, \u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e seal remover, and 2 \u003ca href=\"\/products\/95008-qu95008-certified-usa-made-7-8-9-unc-grade-8-coarse-thread-hex-nut\" target=\"_blank\"\u003eQU95008\u003c\/a\u003e Grade 8 jam nuts. Both \u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e and \u003ca href=\"\/products\/1151-qt1151-short-extension-drive-rod-for-inner-axle-seal-removal\" target=\"_blank\"\u003eQT1151\u003c\/a\u003e are made from U.S. produced 1.25\" diameter steel and have wrench flats machined in the shaft. Rods, Remover, and Nuts are USA Made. Finish on either rod may be either light Brown Oil Finish or Black Oxide (no choice)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSeal Installer Tools\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eDesign Change \u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eTo Install\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eTool Attachments\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eTool Sets\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eQK4647 Kit Includes:\u003cbr\u003e\u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e Seal Remover\u003cbr\u003e\u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e Drive Rod\u003cbr\u003e\u003ca href=\"\/products\/1151-qt1151-short-extension-drive-rod-for-inner-axle-seal-removal\" target=\"_blank\"\u003eQT1151\u003c\/a\u003e Extension Rod\u003cbr\u003e(2) \u003ca href=\"\/products\/95008-qu95008-certified-usa-made-7-8-9-unc-grade-8-coarse-thread-hex-nut\" target=\"_blank\"\u003eQU95008\u003c\/a\u003e Grade 8 Jam Nuts\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeal Installer Tools\u003c\/strong\u003e\u003cbr\u003eThe front inner axle shaft seals on Excursions and 1999 to 2004 Super Duty trucks can get really stuck to the housing. One way to break them free without wearing your arm out swinging a hammer is to use our Seal Installer Tools (\u003ca href=\"\/products\/664643-qk4643-adjustable-depth-front-inner-axle-seal-kit-1999-2005-ford-dana-50\" target=\"_blank\"\u003eQK4643\u003c\/a\u003e, \u003ca href=\"\/products\/4643-ts4643-adjustable-inner-axle-seal-tool-set-model-50\" target=\"_blank\"\u003eTS4643\u003c\/a\u003e, \u003ca href=\"\/products\/4644-qk4644-front-inner-axle-seal-and-tool-kit-for-ford-dana-60-super-60\" target=\"_blank\"\u003eQK4644\u003c\/a\u003e, or \u003ca href=\"\/products\/884644-ts4644-dana-60-adjustable-depth-inner-axle-seal-installer-tool-set\" target=\"_blank\"\u003eTS4644\u003c\/a\u003e) to break the old seals free. Once you get them to budge, remove the Installer and use QK4647 Tool Set to drive the seals out of the axle housing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003eOnce the seals are removed, you need to clean any dirt, grit, or crud out of the diff housing and axle tubes. After that, you can install your new seals. Seal installation is best done with our tooling made for your specific application. Sometimes you can get by with makeshift installers you cobble together, but in most cases, using makeshift tools just guarantees you get to do the job all over again!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Install\u003c\/strong\u003e\u003cbr\u003eMost inner axle seals are located right next to the differential and are impossible to replace without disassembling the axle up to and including the differential. Once everything except the pinion gear is removed, you drive the seals inward until they drop into the housing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool Attachments\u003c\/strong\u003e\u003cbr\u003eOur currently available attachments are:\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e:\u003c\/strong\u003e Fits axle tube inside diameters of 1.75\" and larger. Max seal ID with rubber lip seals is 1.5\", max seal diameter with oil bath type seal is 1-9\/16\" (used on Ford Excursion and Super Duty® Model 50 and 60 monobeam axles from 1999 to 2004). This remover fits most Model 30, Model 44, and GM 10 Bolt front axles. The outside diameter is made to fit through the inner plastic axle guides used on 1999-2004 Ford Super Duty and 2000-2005 Ford Excursion.\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e:\u003c\/strong\u003e Fits axle tube inside diameters of 2.00\" and larger. Max seal ID 1-3\/4\". This remover fits most Model Model 44, Model 50, Model 60, Model 61, Model Super 60, Model 70, AAM 925, and GM 10 Bolt front axles with 3\" or larger outside diameter axle tubes.\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"\/products\/1216-qt1216-2-25-axle-seal-remover\" target=\"_blank\"\u003eQT1216\u003c\/a\u003e:\u003c\/strong\u003e Fits axle tube inside diameters of 2.25\" and larger. Max seal ID 2\". This remover is primarily made to remove the large bore, right side seal on 2000-2002 Dodge Ram 2500 and Ram 3500 trucks with vacuum controlled Central Axle Disconnect (CAD). It will also work on all to remove the left seals on the same model trucks, plus either seal on all 2002 and newer Dodge Ram 2500 and Ram 3500 models and all 2005 and newer Ford Super Duty® F-250, F-350, F450, and F-550 4x4s. \u003cbr\u003e\u003cstrong\u003eFor Smaller Axles\u003c\/strong\u003e: For axle tube diameters between 1.50\" and 1.75\", you just use \u003ca href=\"\/products\/95008-qu95008-certified-usa-made-7-8-9-unc-grade-8-coarse-thread-hex-nut\" target=\"_blank\"\u003eQU95008\u003c\/a\u003e nut as the remover.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool Sets\u003c\/strong\u003e\u003cbr\u003eOur Front Axle Shaft Oil Seal Remover Tool Sets are:\u003cbr\u003eQK4647: Includes TS4563 Rod Assembly and \u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e Remover (Most smaller axles plus Ford Excursion and 1999-2004 Super Duty®)\u003cbr\u003e\u003ca href=\"\/products\/1184-ts1184-front-axle-shaft-oil-seal-remover-set-for-dodge-ram-with-cad\" target=\"_blank\"\u003eTS1184\u003c\/a\u003e: Includes \u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e Long Driver Rod, \u003ca href=\"\/products\/95007-qu95007-3-4-uss-grade-8-hex-nut\" target=\"_blank\"\u003eQU95007\u003c\/a\u003e Nut, and \u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e Remover (Specific Kit for most Dodge with CAD)\u003cbr\u003e\u003ca href=\"\/products\/4862-ts4862-inner-axle-remover-set\" target=\"_blank\"\u003eTS4862\u003c\/a\u003e: Includes TS4563 Rod Assembly and \u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e Remover (Most larger axles, Except: 2000-2002 CAD equipped Ram 2500 and Ram 3500 or Ford Excursion and 1999-2004 Super Duty®)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e Universal for most solid front drive axles with inner axle seal with an inside diameter of 1-1\/2\" or less\u003cbr\u003ePLUS: \u003cbr\u003e4x4 Ford Super Duty F-250, F-350, F-450, F-550: 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003eFord Excursion 4x4: 2000, 2001, 2002, 2003, 2004, 2005\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656752570445,"sku":"4647","price":149.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4647__83388_7373__35507.1707849125.1280.1280.jpg?v=1778720430"},{"product_id":"4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts","title":"QK4727 Dana 30 \u0026 Dana 44 Front Spindle Nut Kit with Round 4-Slot \u0026 1-5\/8\" Thread Nuts","description":"\u003cp\u003e\u003cstrong\u003eQK4727 4 Slot Dana 30, Dana 44, GM 10 Bolt Front Spindle Nut Kit \u003c\/strong\u003eincludes one each genuine original equipment \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut, \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e Spindle Nut Lock Washer, and \u003ca href=\"\/products\/40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread\" target=\"_blank\"\u003eQU40031\u003c\/a\u003e Outer Spindle Nut which fit many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC), and 1974-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This nut was used as the inner spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974. Jeep J-series full size 4x4s also used these parts from 1973-1989. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/554727-qa4727u-good-used-4-slot-front-spindle-nut-kit\" target=\"_blank\"\u003eQA4727U\u003c\/a\u003e Used Front Spindle Nut Kit available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFitment\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eTool\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eQK4727 Spindle Nut Kit fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThe pin that protrudes from the outboard face of \u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Inner Spindle Nut is an anti-rotation device that engages with one of the holes in \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e Spindle Lock Washer. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003cbr\u003e\u003c\/strong\u003e1\/2 ton and 3\/4 ton trucks with Dana 44 or GM 10 Bolt front axles with serviceable wheel bearings: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton ton trucks with Dana 44 front axle and serviceable wheel bearings: 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e:\u003cbr\u003eBroncos with Dana 30 front axle: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eF150, F250, Bronco with Dana 44 Front Axle: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF100, F150, F250 1\/2 ton and 3\/4 ton trucks with standard Dana 44 front axle and serviceable wheel bearings: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF250 Crew Cab Dana 60 Front Axle: 1974, 1975, 1976, 1977\u003cbr\u003eF150, Bronco with Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with Dana 44IFS Front Axle, Manual Hubs and Round Spindle Nuts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton 1100 and 1110 series 4x4: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series Full Size 4x4s:\u003c\/strong\u003e\u003cbr\u003eWagoneer, Cherokee, Cherokee Chief, J10, J20 Dana 44 front axles: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656760729677,"sku":"4727","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QK4727_0474_clean__53543_19646__09429.1707849699.1280.1280.png?v=1742500652"},{"product_id":"40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8","title":"QU40004 4x4 Front 4 Slot Inner Spindle Nut with Pin Thread Size 1-5\/8\"","description":"\u003cp\u003e\u003cstrong\u003eQU40004 4x4 Front, 4 Slot Inner Spindle Nut with Pin\u003c\/strong\u003e is a genuine original equipment part for many Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 closed knuckle front drive axles. This nut was used as the inner spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1980 to 1993, Jeep J-series full size 4x4s had it from 1973-1989. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eThread Diameter\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003ePin Engagement\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSocket\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThread Diameter\u003c\/strong\u003e\u003cbr\u003eQU40004 Spindle Nut fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePin Engagement\u003c\/strong\u003e\u003cbr\u003eThe pin that protrudes from the outboard face is an anti-rotation device that engages with one of the holes in either \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e or \u003ca href=\"\/products\/40429-qu40429-tabbed-spindle-nut-lockwasher-for-dana-44-and-gm-10-bolt\" target=\"_blank\"\u003eQU40429\u003c\/a\u003e Spindle Lock Washers. Installing the lock washer without having the pin engage one of the holes will either break or bend the pin. Improperly installed nuts and washer sets can back off during vehicle operation and possibly cause the hub and wheel assembly to fall off which may lead to severe injury or death.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSocket\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMost SUVs\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC GM:\u003cbr\u003e\u003c\/strong\u003e1\/2 Ton \u0026amp; 3\/4 Ton Pickups with Dana 44 Front Axles\u003cbr\u003eGM 10 Bolt Front Axle\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge Dana 44 Front Axles:\u003c\/strong\u003e\u003cbr\u003e1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003e1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003e\u003c\/strong\u003eFord Bronco, Many Dana 30 1978-1979\u003cbr\u003eDana 44 Front Axles 1978-1979\u003cbr\u003eF-150, F-250 Crew Cab Dana 60 Closed Knuckle Front Drive Axles: 1973, 1974, 1975, 1976, 1977, 1978-1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series Full Size 4x4s with Dana 44 Front Axles:\u003c\/strong\u003e\u003cbr\u003e1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656929779789,"sku":"40004","price":19.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40004_clean__38386.1728498941.1280.1280.png?v=1742509568"},{"product_id":"40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread","title":"QU40031 4x4 Front Outer Spindle Nut with 4 Slots and 1-5\/8\" Thread","description":"\u003cp\u003e\u003cstrong\u003eQU40031 Outer 4 Slot 4x4 Front Spindle Nut\u003c\/strong\u003e is a genuine Dana-Spicer original equipment part for Dana 30 (Ford Bronco) Dana 44 (All Makes), GM 10 Bolt (Chevy\/GMC) and 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles. This 1-5\/8\" thread nut was used as the outer spindle nut on most SUV's, 1\/2 ton and 3\/4 ton Chevy, Ford, and GMC trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1980 to 1993, Jeep J-series full-size 4x4s had it from 1973-1989. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e and \u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e Spindle Nut Kits\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540031-qu40031u-used-outer-4-slot-4x4-front-spindle-nut\" target=\"_blank\"\u003eQU40031U\u003c\/a\u003e Used Outer 4 Slot Spindle Nut available while supply lasts\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eSpindle Nut Sockets\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eQU40031 Spindle Nut fits spindles with thread diameters of 1-5\/8\".\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Nut Sockets\u003c\/strong\u003e\u003cbr\u003eUse with \u003ca href=\"\/products\/881012-qt1012-4-lug-4x4-front-spindle-nut-socket\" target=\"_blank\"\u003eQT1012\u003c\/a\u003e or \u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025\u003c\/a\u003e Spindle Nut Sockets. The spindle nut tightening procedure and torque specification varies widely depending upon the year and model. Consult a factory shop manual for your vehicle.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eMost SUV's, 1\/2 ton, and 3\/4 ton with serviceable wheel bearings (late 1950's to early 1990's)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e:\u003cbr\u003eDana 30 (Ford Bronco) and Dana 44 (all makes)\u003cbr\u003eF-250 Crew Cab (Dana 60 front drive axles): 1973, 1974, 1975, 1976, 1977\u003cbr\u003eF150, F250, Bronco, Dana 44 1978-1979 \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e:\u003cbr\u003eGM 10 Bolt\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e:\u003cbr\u003e1\/2 ton and 3\/4 ton: 1969, 1970, 1971, 1972, 1973, 1974, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e:\u003cbr\u003eJ-series full size 4x4s: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656940298317,"sku":"40031","price":10.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40031_clean__56182.1728499195.1280.1280.png?v=1742509884"},{"product_id":"40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts","title":"QU40032 Axle Shaft Snap Ring for 19 Spline Dana Front Outer Axle Shafts","description":"\u003cp\u003e\u003cstrong\u003e QU40032 External Lug Outer Axle Shaft Snap Ring for Dana 19+ Spine Axle Shafts\u003c\/strong\u003e is a genuine original equipment Dana part for 1950's to early 1990's Chevy, Dodge, Ford, GMC, International, and Jeep 4x4s with 1-1\/4' x 19 Spline Outer Axle Shafts. One of these snap rings is used on each outer axle shaft. QU40032 snap rings were used on most Dana 44, GM 10 Bolt, Ford Dana 60 closed Knuckle, and Ford Dana 30 Front axles. QU40032 External Lug Axle Shaft Snap Ring is interchangeable with \u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Inverted Lug Snap Rings for most applications (See Tech Note 2).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003ePurposes\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eInterchangeable with QU40614\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePurpose\u003c\/strong\u003e\u003cbr\u003e This Snap Ring keeps the outer axle shaft engaged with the seal(s) or bushing face in the back of of your spindle. In full time and Central Axle Disconnect (CAD) applications, it keeps the splined hub drive gear from blowing out of the wheel hub. This little guy has a big job, so always replace any bent or twisted Snap Ring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInterchangeable with QU40614\u003c\/strong\u003e\u003cbr\u003e QU40032 and \u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Rings are functionally interchangeable for most applications. QU40032 External Lug Snap Ring has higher profile lugs (the \"ears\" with the holes in them) compared to \u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e which has inverted lugs. Some lockout hub designs such as \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn plastic dial units have minimal clearance around the snap ring groove and require \u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Snap Ring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eChevy, Dodge, Ford, GMC, International and Jeep 4x4s with 19 Spline Outer Axle Shafts: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e Dana 30 Dana 44, GM 10 Bolt, Ford Dana 60 closed Knuckle, and Ford Dana 30 Front axles\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656940658765,"sku":"40032","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40032_2788_1600__83683_21351__39050.1707860951.1280.1280.png?v=1742509907"},{"product_id":"40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs","title":"QU40035 Hub Spring Plate or Spring Cup for Splined 4x4 Wheel Hubs","description":"\u003cp\u003e\u003cstrong\u003eQU40035 Hub Spring Plate or Spring Cup for Splined 4x4 Wheel Hubs\u003c\/strong\u003e fits between the \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e hub spring and the outer wheel bearing cup on SUV's, and pickups with Dana Spicer Model 30, Model 44 or GM 10 Bolt front drive axles equipped with internal mount, Spicer factory lock out hubs or full time drive gears. These Spring Plates were used on most of the late 1960's to mid 1980's Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with internal splined front wheel hubs. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5540035-qu40035u-used-hub-spring-plate\" target=\"_blank\"\u003eQU40035U\u003c\/a\u003e Used Hub Spring Plate or Spring Cup available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eInstallation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eFactory Hub Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpicer ONLY Spring Plate\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThese 2.89\" diameter, cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring! Properly installed, the large diameter end of QU40035 Spring Plate will fit against the outer bearing cup on the inboard side. The function of this part is to protect the outer wheel bearing from the spring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFactory Hub Parts\u003c\/strong\u003e\u003cbr\u003eSpicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring, and QU40035 Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer ONLY Spring Plate\u003c\/strong\u003e\u003cbr\u003eQU40035 Spring Plate is NOT used with Warn or any other aftermarket hub-lock. QU40035 is only used with Spicer factory plastic dial hubs or with full time splined hub drive gears that are held under tension by \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e spring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMatching Parts for QU40035 Hub Plate:\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears \u003cbr\u003e\u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Ring \u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Hub Spring \u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Outer Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cem\u003e(part will fit these models but may not have been original equipment for all years)\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW150, W250 with Dana 44 axle: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW100: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco (Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3330 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979\u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41656945639501,"sku":"40035","price":11.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40035_1200_clean__44057_11651__75894.1707861021.1280.1280.jpg?v=1742509960"},{"product_id":"40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles","title":"QU40050 Spicer Hub Spring for Dana 30, Dana 44, GM 10 Bolt Axles","description":"\u003cp\u003e\u003cstrong\u003e QU40050 Spicer Tapered Hub Spring\u003c\/strong\u003e for SUV's, and pickups with Dana Spicer Model 30, Model 44 or GM 10 Bolt front drive axles equipped with internal mount, Spicer lock out hubs or full time drive gears. These springs were used on most of the late 1960's to mid 1980's Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with internal splined front wheel hubs. USA Made.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAlso Available While Supplies Last: \u003cstrong\u003e\u003ca href=\"\/products\/5540050-qu40050u-used-spicer-hub-spring-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050U\u003c\/a\u003e Used Spicer Tapered Hub Spring\u003c\/strong\u003e.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eTo Install\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eSpring Length\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpicer Factory Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Install\u003c\/strong\u003e\u003cbr\u003e The large, inboard end of QU40050 Spring rests against \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate. If the plate is damaged, replace it at the same time you replace the spring. \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring Length\u003c\/strong\u003e\u003cbr\u003e The free length of these new springs is about 3-11\/16\" (+\/- 1\/8\"). Most used Springs are shorter as they have weakened over time.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Factory Hubs\u003c\/strong\u003e\u003cbr\u003e Spicer factory hubs have been out of production for decades. They were probably the strongest internal mount lockout hub ever made, but unfortunately most parts for them are long gone. As of December 2011, we still have these parts in stock: \u003ca href=\"\/products\/40154-qu40154-hub-cam-body-for-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40154\u003c\/a\u003e Hub Cam, \u003ca href=\"\/products\/40403-qu40558r-recon-10-tooth-axle-shaft-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40558R\u003c\/a\u003e, \u003ca href=\"\/products\/40404-qu40559r-recon-10-tooth-hub-drive-gear-for-2nd-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40559R\u003c\/a\u003e, \u003ca href=\"\/products\/40560-qu40560r-recon-18t-axle-shaft-gear-for-1st-design-spicer-plastic-dial-internal-mount-hubs\" target=\"_blank\"\u003eQU40560R\u003c\/a\u003e, \u003ca href=\"\/products\/40561-qu40561r-recon-18t-hub-drive-gear-for-1st-design-spicer-plastic-dial-hubs\" target=\"_blank\"\u003eQU40561R\u003c\/a\u003e (Hub Gears), \u003ca href=\"\/products\/40374-qu40374u-used-blue-plastic-hub-dial-for-1972-1981-gm-dana-44-or-10-bolt\" target=\"_blank\"\u003eQU40374U\u003c\/a\u003e Hub Dial, \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring, QU40050 Spring, and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e (part will fit these models but may not have been original equipment for all years)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC\u003c\/strong\u003e: \u003cbr\u003e K5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 19067, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003e K20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003e W100: 1969, 1970, 1971, 1972, 1973, 1974 \u003cbr\u003e W150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e F100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003e Bronco (Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979 \u003cbr\u003e F150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989 \u003cbr\u003e F150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003e F250 with 3330 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003e F250 (Dana 44): 1978, 1979 \u003cbr\u003e F250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e 1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e Cherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 \u003cbr\u003e J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 \u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656951767117,"sku":"40050","price":14.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40050__04915_9028__84612.1707861302.1280.1280.jpg?v=1742510187"},{"product_id":"40060-qu40060-round-spindle-lock-washer","title":"QU40060 Round Spindle Lock Washer","description":"\u003cp\u003e\u003cstrong\u003eQU40060 Round Spindle Lock Washer\u003c\/strong\u003e for Dana 28IFS, Dana 30, Dana 35IFS, Dana 44 (All Makes), Dana 44IFS, 1973-1977 Ford F-250 Crew Cab Dana 60 front drive axles, and GM 10 (Chevy\/GM) Bolt Front Axles. This washer was used between the inner and outer spindle nuts on most SUVs, 1\/2 ton and 3\/4 ton Chevy, Ford, and GM trucks with serviceable wheel bearings from the late 1950's to the early 1990's. Dodge used it from 1969-1974 and 1985 to 1993, Jeep J-series full size 4x4s had it from 1974-1991. USA Made.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut Kit.\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540060-qu40060u-good-used-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060U\u003c\/a\u003e Used Round Spindle Lock Washer available while supplies last.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eOlder Ford Tabs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eSize\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOlder Ford Tabs\u003c\/strong\u003e\u003cbr\u003eQU40060 has the correct ID and OD to fit 1971 and prior Ford Broncos with Dana 30 front axles, but the tab that engages the spindle slot is wider than the one on the no longer available washer used by Ford.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003eQU40060 Spindle Washer fits spindles with thread diameters of 1-5\/8\" or 38mm.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/4769-qa4769-spindle-nut-kit-for-dana-28ifs-dana-35ifs-front-axles\" target=\"_blank\"\u003eQA4769\u003c\/a\u003e 1990-1997 Ford Dana 28IFS, 35IFS\u003cbr\u003e\u003ca href=\"\/products\/40108-qu40108-outer-spindle-nut-without-pin-for-dana-35-front-axles\" target=\"_blank\"\u003eQU40108\u003c\/a\u003e Dana 28IFS, Outer Spindle Nut\u003cbr\u003e\u003ca href=\"\/products\/40123-qu40123-inner-spindle-wheel-bearing-nut-with-pin-for-dana-35ifs-front-axles\" target=\"_blank\"\u003eQU40123\u003c\/a\u003e Dana 28IFS Inner Spindle Nut with Pin\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Dana 30, 44, 44HD\u003cbr\u003e\u003ca href=\"\/products\/40004-qu40004-4x4-front-4-slot-inner-spindle-nut-with-pin-thread-size-1-5-8\" target=\"_blank\"\u003eQU40004\u003c\/a\u003e Dana 30, 44 Inner Spindle Nut\u003cbr\u003e\u003ca href=\"\/products\/40031-qu40031-4x4-front-outer-spindle-nut-with-4-slots-and-1-5-8-thread\" target=\"_blank\"\u003eQU40031\u003c\/a\u003e Dana 30, 44 Outer Spindle Nut\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GM:\u003c\/strong\u003e\u003cbr\u003eK10, K20, K15, K25, Standard Dana 44: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eDana 44 HD Closed Knuckle which uses a 3 piece double nut \u0026amp; washer set to adjust \u0026amp; retain wheel bearings: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eBlazer, Jimmy, 1\/2 ton, 3\/4 ton 4x4s Dana 44 Open Knuckle: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eGM 10 Bolt 8.5\" Front Axle: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW-100 Dana 44 4x4s: 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eRamcharger, W-100, W-150, W-200, W-250 4x4s and Plymouth Traildusters with Dana 44 open knuckle: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord Front Axle:\u003c\/strong\u003e\u003cbr\u003eRanger Pickup Dana 28IFS with 27 Spline Manual Lock Hubs: 1993, 1994, 1995, 1996, 1997\u003cbr\u003eBronco Dana 30: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eRanger Pickup, Bronco II, Explorer with Dana 35IFS \u0026amp; 27 Spline Manual Lock Hubs: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003eBronco, F-100, F-150 F-250, Dana 44: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF-100 1\/2 ton 4x4s Regular Cab trucks with Standard Dana 44 Closed Knuckle: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF-250 3\/4 ton 4x4s Regular Cab trucks with Standard Dana 44 Closed Knuckle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF-250 3\/4 ton 4x4s with Dana 44 Open Knuckle: 1976, 1977, 1978, 1979\u003cbr\u003eF-250 3\/4 ton Dana 44HD: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eBronco, F-100, F-150, F-250 4x4s with Dana 44IFS Front Axles with Manual Hub-Locks: 1983.5, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF-250 Crew Cab Dana 60 Front Axles: 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e1100 Dana 44: 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep J-Series:\u003c\/strong\u003e\u003cbr\u003eJ-Series Full-Size 4x4s: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656957599821,"sku":"40060","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40060_1_1200_clean__43163_13998__76512.1707861557.1280.1280.jpg?v=1742510383"},{"product_id":"10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles","title":"QU10576 1-3\/4\" ID Bend Over Tab Lock Washer for 4x4 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e QU10576 Bend Over Tab Lock Washer for Dodge, IHC, and Jeep Dana 44 Front Axles and IHC Rear Axles with 1-3\/4\" Spindle Threads \u003c\/strong\u003efits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3\/4\" hex spindle nuts and external mount wheel hubs. Washer has two pre-bent tabs that fit over the inner spindle nut and 6 bend-over tabs for the outer nut. USA made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installing\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eTo Install\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSingle Use Part\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eIHC1100\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note5\"\u003eInternal Tab\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note6\"\u003e1.75” Thread\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note7\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003e At least one of the six bend over tabs will line up with a flat on the outer spindle nut after it is tightened. Bend that tab over the outer nut flat to lock the nut in place.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Install\u003c\/strong\u003e\u003cbr\u003e The pre-bent tabs on QU10576 Washer go over a flat on the inner nut instead of a corner. This may differ from most original lock washers (refer to photo) which have a compound bend on the tabs that will go over a corner of the nut. QU10576 washers are made so the inner tab ends can be altered to grip a nut corner if you require more precise nut adjustment, but if you modify the washer it cannot be returned.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSingle Use Part\u003c\/strong\u003e\u003cbr\u003e QU10576 Spindle Lock Washer is designed as a \"Single Use\" part. \u003cstrong\u003eFor safety reasons, these parts are intended to be installed once and only once!\u003c\/strong\u003e The key slot tab, which keeps the washer from turning, can become fatigued and break off if the washer is reused or if the outer nut is over torqued. You must discard any \u003ca href=\"\/products\/9940037-qu40037-2-id-bent-tab-spindle-lock-washer-for-chevy-ford-and-gmc\" target=\"_blank\"\u003eQU40037\u003c\/a\u003e lock washer that is removed from the spindle for any reason and replace it with a new QU10576 Spindle Lock Washer.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIHC 1100\u003c\/strong\u003e\u003cbr\u003e This Lock Washer fits 1957-1974 Dodge, 1956-1975 International, and 1968-1973 Jeep trucks with front spindles that have 1-3\/4' threads and wheel hubs that are drilled and tapped with 6 3\/8\" holes in a 3-3\/4\" bolt circle to mount an external drive flange or lockout hub. QU10576 washer is NOT used on 1964-1975 International 1\/2 ton 4x4s or 1969-1974 Dodge W-100 4x4 trucks with 3-3\/8\" diameter internally splined wheel hubs. If you are looking for spindle lock washers for a IHC 1100 or Dodge W-100 with internally splined hubs see \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e Washer or \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut Set.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInternal Tab\u003c\/strong\u003e\u003cbr\u003e QU10576 Spindle Lock Washer has an internal tab that fits a 1\/4\" spindle key slot. It is not uncommon to find a spindle with slightly mashed threads at the outboard end which will reduce the slot width. If present, this condition will need to be fixed before you can install the lock washer.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1.750” Thread\u003c\/strong\u003e\u003cbr\u003e International and Jeep truck year and model application information is often difficult to precisely list due to the relatively low production numbers and the fact that both manufacturers often built special purpose vehicles for government and vocational applications. Regardless of the application information, if you have a front spindle with 1.750\" thread, QU10576 is the correct part for your 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/11164-qu11164-1-3-4-thread-spindle-hex-nut-for-dodge-ihc-jeep-dana-44\" target=\"_blank\"\u003eQU11164\u003c\/a\u003e Hex Spindle Nut with 1-3\/4\" Thread\u003cbr\u003e\u003ca href=\"\/products\/11165-qu11165-nla-inner-spindle-thrust-washer-dana-44-front-axles\" target=\"_blank\"\u003eQU11165\u003c\/a\u003e Spindle Thrust Washer (goes between outer wheel bearing and inner spindle nut)\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Gasket for Lockout Hub or Drive Flange\u003cbr\u003e\u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704\u003c\/a\u003e Front Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701\u003c\/a\u003e Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702\u003c\/a\u003e Wheel Bearing 1-3\/4\" ID\u003cbr\u003e\u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703\u003c\/a\u003e Wheel Bearing 1-13\/16\" ID \u003cbr\u003e\u003ca href=\"\/products\/4924-tk4924-early-front-wheel-bearing-seal-gasket-kit-for-dana-44-axles\" target=\"_blank\"\u003eTK4924\u003c\/a\u003e Front Wheel Bearing Kit 1957-1968 Dodge and 1956-1971.5 IHC\u003cbr\u003e\u003ca href=\"\/products\/4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late\" target=\"_blank\"\u003eTK4926\u003c\/a\u003e Front Wheel Bearing Kit 1969-1974 Dodge, IHC, and 1968-1973 Jeep\u003cbr\u003e\u003ca href=\"\/products\/881013-qt1013i-2-1-2-hex-thin-wall-spindle-nut-socket\" target=\"_blank\"\u003eQT1013i\u003c\/a\u003e 2-1\/2\" Hex Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e \u003cstrong\u003eDodge:\u003cbr\u003e\u003c\/strong\u003e W100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 \u003cbr\u003e W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e 100, 1100 1\/2 ton with 6 bolt, external mount hub with 3-3\/4\" bolt circle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963\u003cbr\u003e 120, 1200, 1210 3\/4 ton: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003e Dana 60 Rear Axle: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e J4000 with 8000 pound GVW including Camper Special: 1968, 1969, 1970\u003cbr\u003e J4800 with 8000 pound GVW including Camper Special: 1971, 1972, 1973\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657146867789,"sku":"10576","price":26.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu10576_1200_clean__89441_11592__82458.1707871362.1280.1280.jpg?v=1742517389"},{"product_id":"40822-qu40822-1-1-16-cap-axle-universal-joint-greaseable","title":"QU40822 1-1\/16\" Cap Axle Universal Joint, Greaseable","description":"\u003cp\u003e\u003cstrong\u003eQU40822 Greaseable Small Axle Universal Joint for Vintage Dana Spicer Open Knuckle Front Axles\u003c\/strong\u003e is a greaseable, front axle u-joint for late 1960s to early 1970s vintage Chevy, Dodge, Ford, GMC, IHC 1\/2 ton and 3\/4 ton light duty 4x4s with Dana 44 open knuckle front drive axles. Also fits Ford Bronco, IHC Scout, and Jeep CJ 4x4s with Dana 30 front axles. QU40822 is cross-drilled and one cap is drilled and tapped for the included flush-type grease fitting. 1310 series. \u003c\/p\u003e \u003cp\u003eAlso See \u003ca href=\"\/products\/40792-qu40792-1-1-16-cup-axle-universal-joint-non-greaseable\" target=\"_blank\"\u003eQU40792\u003c\/a\u003e Non-Greaseable Small Axle Universal Joint\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eU-Joint Specs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eU-Joint Specs \u003c\/strong\u003e\u003cbr\u003eQU40822 is a greaseable, internal c-clip retained, axle universal joint with a cup diameter of 1-1\/16\". The inside span between your axle shaft yoke ears should be 2-3\/16\". This greaseable u-joint is adequate for smaller 4x4s like Jeeps and Broncos with 4 or 6 cylinder engines, but I do not recommend it be used in larger trucks or high performance vehicles with V-8 engines due to the small physical size of 1310 series u-joints. I installed a set of these in my wife's 1978 6-cyl CJ-7 in the early 1980's. They are still in the Jeep which is now owned by our nephew. If installed in the right vehicle and with regular greasing, these greaseable axle u-joints may out last you.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for Axle U-Joints:\u003cbr\u003e\u003ca href=\"\/products\/4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQK4734\u003c\/a\u003e Spindle Axle Shaft Bearing\u003cbr\u003e\u003ca href=\"\/products\/40232-qu40232-early-type-brass-axle-shaft-spindle-thrust-washer\" target=\"_blank\"\u003eQU40232\u003c\/a\u003e Bronze Spindle Thrust Washer for Early Production Vehicles\u003cbr\u003e\u003ca href=\"\/products\/40043-qu40043-early-type-dana-front-axle-one-piece-spindle-seal\"\u003eQU40043\u003c\/a\u003e 2\" ID Spindle Seal for Early Production Axles\u003cbr\u003e\u003ca href=\"\/products\/40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt\" target=\"_blank\"\u003eQU40228\u003c\/a\u003e Spindle Seal and Bearing Kit for Later Production Axles (Large Seal ID is 2-1\/4\")\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003e Blazer with Open Knuckle Front Axle: 1969\u003cbr\u003e GM 4x4 Dana 44 Open Knuckle Axle in Suburban, K10, K15, K20, K25: 1970, 1971, 1972.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e\u003cbr\u003e W100, W200 with Dana 44 Open Knuckle Front Axle and small u-joint: 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eBronco Dana 30 Open Knuckle Axle: 1966, 1967, 1968, 1969, 1970, 1971, 1972 \u003cbr\u003e F-100 Dana 44 Open Knuckle Axle: 1967, 1968, 1969, 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational\u003c\/strong\u003e\u003cbr\u003e Scout with Dana 30 Open Knuckle Front Axles: 1972, 1973, 1974, 1975, 1976, 1977\u003cbr\u003e 1\/2 Ton Truck: 1971.5, 1972, 1973.5\u003cbr\u003e Scout with Dana 44 Front Axle: 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e\u003cbr\u003e CJ Series: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e Partial XJ with Dana 30: 1987, 1988, 1989, 1990, 1991, 1992\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41657314017357,"sku":"40822","price":52.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40822__67327_9474__83045.1707876319.1280.1280.jpg?v=1742521724"},{"product_id":"40598-qu40598-1-1-4-wide-stepped-hub-drive-gear","title":"QU40598 1-1\/4\" Wide Stepped Hub Drive Gear","description":"\u003cp\u003e\u003cstrong\u003eQU40598 1-1\/4\" Wide Stepped Gear\u003c\/strong\u003e for Dana 30, Dana 44, and GM 10 Bolt Front Axles. QU40598 was the original design. Outside spline that engages wheel hub is 27\/32\" wide. These gears are stepped on the outboard side to aid in removal and to space the gear back from the hub cap. QU40598 gears were usually used with \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate. The back edge of the snap ring groove is approximately 5\/16\" from the end. Obsolete part, available while supplies last.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5540598-qu40598u-used-1-1-4-wide-stepped-hub-gear\" target=\"_blank\"\u003eQU40598U\u003c\/a\u003e Used 1-1\/4\" Wide Stepped Gear available while supplies last\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e Used 7\/8\" Wide Single Width Gear available while supplies last\u003cbr\u003eAlso See: \u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Used 7\/8\" Wide Stepped Gear available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSplined Hub Gears\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eProduct Note\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eHistory\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSplined Hub Gears\u003c\/strong\u003e\u003cbr\u003eQU40598\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Front Hub Gears for Dana 30, Dana 44, and GM 10 Bolt Front Axles were used on 4x4s without lockout hubs from 1959 to 1993. These one piece, solid steel splined hub gears provide the strongest connection between your axle shaft and wheel hub. At least five different gears of were used on various vehicles over the years. QU40598\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e are the most common variants.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eQU40598 stepped hub drive gears were mounted outboard of \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate and \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring. The spring pushes the gear against the axle shaft snap ring providing outward tension on the axle shaft, which keeps the axle shaft engaged against the spindle thrust washer. On open knuckle axles, the spring tension also keeps the axle shaft fully seated with the spindle seal(s). The inner edge of the axle shaft snap ring is about 5\/16\" from the end.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHistory\u003c\/strong\u003e\u003cbr\u003eUp until the early 1970s, splined hub gears were the \"stock\" equipment on most lighter 4x4s. If you wanted lockouts, you paid extra. With the advent of full time transfer cases in 1973, splined hub gears were used instead of lockouts on trucks with internally spined wheel hubs. When the full time transfer case fad died out after 1979, splined hub gears were pretty much dropped as factory equipment until Jeep (1982-1984) and Dodge (1985-1993) introduced Dana 44 front axles with vacuum controlled central axle disconnect. Today, splined hub gears are rare and out of production, but still in high demand for competition and severe off road use as they are by far, the strongest choice available for connecting the axle shaft to the wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Plate\u003c\/strong\u003e\u003cbr\u003eThe large, inboard end of \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring rests against \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate. If the plate is damaged, replace it at the same time you replace the spring. \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e cup-shaped plates are often installed backwards which will ruin the plate and outer wheel bearing. Install the plate so the FLAT side is towards the spring!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for Splined Hub Gears:\u003cbr\u003e\u003ca href=\"\/products\/40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40427\u003c\/a\u003e Chrome Hub Cap\u003cbr\u003e\u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/40389-qu40389-1980-1993-dodge-dana-44-outer-axle-shaft\" target=\"_blank\"\u003eQU40389\u003c\/a\u003e Outer Axle Shaft for 1980-1993 Dodge Dana 44 \u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications for QU40598\/QU40428\/QU40657 Splined Hub Gears:\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(part will fit these models but may not have been original equipment for all years):\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3300 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979\u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657408421965,"sku":"40598","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40598_1_1200_clean__87611_16428__74932.1707880683.1280.1280.jpg?v=1742524984"},{"product_id":"40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring","title":"QU40614 Inverted Lug Outer Axle Shaft Snap Ring","description":"\u003cp\u003e\u003cstrong\u003eQU40614 Inverted Lug Outer Axle Shaft Snap Ring\u003c\/strong\u003e is a genuine original equipment Dana part for 1970's to mid 1990's Chevy, Dodge, Ford, GMC, International, and Jeep 4x4s with 19 Spline Outer Axle Shafts. One of these snap rings is used on each outer axle shaft. QU40614 snap rings were used on many later model Dana 44 and GM 10 Bolt Front axles. QU40614 Inverted Lug Axle Shaft Snap Ring is interchangeable with \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e External Lug Snap Rings for most applications (See Tech Note 2).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003ePurpose\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eInterchangeable with QU40032\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePurpose\u003c\/strong\u003e\u003cbr\u003eThis Snap Ring keeps the outer axle shaft engaged with the seal(s) or bushing face in the back of of your spindle. In full time and Central Axle Disconnect (CAD) applications, it keeps the splined hub drive gear from blowing out of the wheel hub. This little guy has a big job, so always replace any bent or twisted Snap Ring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInterchangeable with QU40032\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e and QU40614 Axle Shaft Snap Rings are functionally interchangeable for most applications. \u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e External Lug Snap Ring has higher profile lugs (the \"ears\" with the holes in them) compared to QU40614 which has inverted lugs. Some lockout hub designs such as \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn plastic dial units have minimal clearance around the snap ring groove and require QU40614 Snap Ring.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40614 Axle Shaft Snap Ring:\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eChevy, Dodge, Ford, GMC, International, and Jeep 4x4's with 19 Spline Outer Axle Shafts from the 1970's to mid 1990's\u003cbr\u003eUsed on many later model Dana 44 and GM 10 Bolt Front Axles\u003cbr\u003e\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657410060365,"sku":"40614","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40614_2__59200_9365__71997.1707881044.1280.1280.jpg?v=1742525281"},{"product_id":"40632-qu40632-dana-44-3-73-faster-ratio-empty-open-differential-case-kit","title":"QU40632 Dana 44 3.73 \u0026 faster Ratio Empty Open Differential Case Kit","description":"\u003cp\u003e\u003cstrong\u003eQU40632 New Dana 44 Fast Ratio Empty Open Differential Case Kit \u003c\/strong\u003eis a genuine Dana OEM empty differential case kit for Dana 44 front and rear axles with 3.73 or numerically lower gear ratios AND 30 spline axle shafts. These popular diffs were used by Dodge, Ford, GM, International, and Jeep and they will fit many front\/rear axle applications from 1967 to 1993. Kit includes the bare Diff, ring gear bolts, differential side bearing shims, and differential cover gasket. Assembled in U.S.A with domestic and imported parts. Non-stock, Special Order item.\u003c\/p\u003e\n\u003cp\u003eAlso see \u003ca href=\"\/products\/40633-qu40633-dana-44-fast-ratio-loaded-open-diff-case-assembly-kit\" target=\"_blank\"\u003eQU40633 \u003c\/a\u003eNew Dana 44 Loaded Diff Assembly Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits 2.72-3.73 Ratio Gear Sets\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eOne Time Use\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eTech Article \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits 2.72-3.73 Ratio Gear Sets\u003c\/strong\u003e\u003cbr\u003eQU40632 Differentials fit most 1967-1993 Dana 44 axles with 2.72 to 3.73 ratio gear sets. If you need a differential for 3.92 to 5.89 ratio gear sets, see \u003ca href=\"\/products\/40634-qu40634-dana-44-3-92-up-slow-ratio-empty-open-diff-case-kit\" target=\"_blank\"\u003eQU40634\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOne Time Use\u003c\/strong\u003e\u003cbr\u003eRing Gear Bolts are designed to be used once and only once.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTech Article\u003c\/strong\u003e\u003cbr\u003eFor more information about differences between early and late production Dana 44 differential cases including spline and bearing changes, see my \u003ca href=\"\/pages\/dana-44-differential-tech-1953-1993\"\u003e1953-1993 Dana 44 Diff Tech Page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eRelated items for QU40632 Dana 44 Diff:\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576 \u003c\/a\u003eDifferential Bearing and Seal Kit for 1993 and older axles\u003cbr\u003e\u003ca href=\"\/products\/50537-qu50537-timken-dana-44-differential-side-bearing-cup\" target=\"_blank\"\u003eQU50537 \u003c\/a\u003eTimken® Differential Side Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50538-qu50538-timken-large-bore-dana-44-or-dana-53-diff-side-bearing\" target=\"_blank\"\u003eQU50538 \u003c\/a\u003eTimken® Differential Side Bearing\u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215 \u003c\/a\u003ePinion Seal to 1993\u003cbr\u003e\u003ca href=\"\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger\" target=\"_blank\"\u003eQU40028 \u003c\/a\u003eInner Pinion Bearing Slinger\u003cbr\u003e\u003ca href=\"\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle\" target=\"_blank\"\u003eQU40448 \u003c\/a\u003eInner Pinion Oil Baffle\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002 \u003c\/a\u003eOuter Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311 \u003c\/a\u003eDiff and Pinion Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009 \u003c\/a\u003ePinion Lock Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010 \u003c\/a\u003ePinion Yoke Washer\u003cbr\u003e\u003ca href=\"\/products\/90009-qu90009-universal-axle-service-pack\" target=\"_blank\"\u003eQU90009 \u003c\/a\u003eAxle Service Pack with Gear Marking Compound, Threadlocker, RTV Sealant, Brush\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032 \u003c\/a\u003eDifferential Housing Spreader\u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044 \u003c\/a\u003eInner Pinion Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812 \u003c\/a\u003eInner\/Outer Pinion Bearing Cup Installer \u003cbr\u003e\u003ca href=\"\/products\/1097-qt1097-differential-master-bearings-for-dana-44-axles\" target=\"_blank\"\u003eQT1097 \u003c\/a\u003eDifferential Master Bearing Set\u003cbr\u003e\u003ca href=\"\/products\/1115-qt1115-dana-44-differential-side-bearing-installer\" target=\"_blank\"\u003eQT1115 \u003c\/a\u003eDifferential Side Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1035-qt1035-differential-press-step-plate\" target=\"_blank\"\u003eQT1035 \u003c\/a\u003eDiff Press Plate\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC (Front Axle)\u003c\/strong\u003e: \u003cbr\u003eK20\/K25\/K2500: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK5 Blazer, Jimmy, K10\/K15: 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge (Front Axle):\u003c\/strong\u003e\u003cbr\u003eW100: 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eW200, W250 with Dana 44 axle: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord (Front Axle):\u003cbr\u003e\u003c\/strong\u003eF250 Dana 44 1978, 1979\u003cbr\u003eF250 Regular Cab: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977.5\u003cbr\u003eBronco: 1971, 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Front Axle):\u003c\/strong\u003e\u003cbr\u003e1100, 1200: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Rear Axle):\u003c\/strong\u003e\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Front Axle):\u003c\/strong\u003e\u003cbr\u003eJ-Series Truck: 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Rear Axle):\u003c\/strong\u003e\u003cbr\u003eCJ5, CJ6: 1972, 1973, 1974, 1975\u003cbr\u003eCherokee, Wagoneer, J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657422086221,"sku":"40632","price":200.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40632-cropped-1280__13240.1728686478.1280.1280.png?v=1742525579"},{"product_id":"40633-qu40633-dana-44-fast-ratio-loaded-open-diff-case-assembly-kit","title":"QU40633 Dana 44 Fast Ratio Loaded Open Diff Case Assembly Kit","description":"\u003cp\u003e\u003cstrong\u003eQU40633 New Dana 44 Fast Ratio Loaded Open Differential Case Assembly Kit\u003c\/strong\u003e is a genuine Dana OEM loaded differential case kit for Dana 44 front and rear axles with 2.73 to 3.73 gear ratios and 30 spline axle shafts. These popular diffs were used by Dodge, Ford, GM, International, and Jeep and they will fit many front\/rear axle applications from 1967 to 1993. Includes the Diff with installed \"Spider Gear\" set, differential side bearings, ring gear bolts, differential side bearing shims, and differential cover gasket. Assembled in U.S.A with domestic and imported parts.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/40632-qu40632-dana-44-3-73-faster-ratio-empty-open-differential-case-kit\" target=\"_blank\"\u003eQU40632\u003c\/a\u003e New Dana 44 Empty Diff or \u003ca href=\"\/products\/5540675-qu40675u-used-loaded-dana-44-30-spline-open-diff-assembly\"\u003eQU40675U\u003c\/a\u003e Used Differential Assembly\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSide Gears\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eIncludes\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eFits\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eRing Gear Bolts\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eDiff Tech Page\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSide Gears\u003c\/strong\u003e\u003cbr\u003eQU40633 Differential has 30 spline side gears.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003eQU40633 is a genuine Dana Differential Case Assembly Kit. In addition to the loaded diff case, it includes: \u003cbr\u003e(2) Differential Side Bearings and (2) Differential Side Bearing Cups \u003cbr\u003eSelection of Differential Shims \u003cbr\u003e\u003ca href=\"\/products\/40209-qu40209-dana-44-ring-gear-bolt\" target=\"_blank\"\u003eQU40209\u003c\/a\u003e Ring Gear Bolt (10) \u003cbr\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003eQU40214\u003c\/a\u003e Dana 44 Cover Gasket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eQU40633 Differentials fit most 1967-1993 Dana 44 axles with 2.73 to 3.73 ratio gear sets. If you need a differential for 3.92 to 5.89 ratio gear sets, see \u003ca href=\"\/products\/40635-qu40635-dana-44-slow-ratio-loaded-open-differ-case-assembly-kit\" target=\"_blank\"\u003eQU40635\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRing Gear Bolts\u003c\/strong\u003e\u003cbr\u003eRing Gear Bolts are designed to be used once and only once.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDiff Tech Page\u003c\/strong\u003e\u003cbr\u003eFor more information about differences between early and late production Dana 44 differential cases including spline and bearing changes, see my \u003ca href=\"\/pages\/dana-44-differential-tech-1953-1993\" target=\"_blank\"\u003e1953-1993 Dana 44 Diff Tech\u003c\/a\u003e Page.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eRelated items for QU40633 Dana 44 Diff: \u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Differential Bearing and Seal Kit for 1993 and older axles \u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal to 1993 \u003cbr\u003e\u003ca href=\"\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger\" target=\"_blank\"\u003eQU40028\u003c\/a\u003e Inner Pinion Bearing Slinger \u003cbr\u003e\u003ca href=\"\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle\" target=\"_blank\"\u003eQU40448\u003c\/a\u003e Inner Pinion Oil Baffle \u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger \u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311\u003c\/a\u003e Diff and Pinion Shim Kit \u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Lock Nut \u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Yoke Washer \u003cbr\u003e\u003ca href=\"\/products\/90009-qu90009-universal-axle-service-pack\" target=\"_blank\"\u003eQU90009\u003c\/a\u003e Axle Service Pack with Gear Marking Compound, Threadlocker, RTV Sealant, Brush \u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032\u003c\/a\u003e Differential Housing Spreader \u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044\u003c\/a\u003e Inner Pinion Bearing Installer \u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812\u003c\/a\u003e Pinion Bearing Cup Installer \u003cbr\u003e\u003ca href=\"\/products\/1115-qt1115-dana-44-differential-side-bearing-installer\" target=\"_blank\"\u003eQT1115\u003c\/a\u003e Differential Side Bearing Installer \u003cbr\u003e\u003ca href=\"\/products\/1035-qt1035-differential-press-step-plate\" target=\"_blank\"\u003eQT1035\u003c\/a\u003e Diff Press Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC (Front Axle):\u003c\/strong\u003e \u003cbr\u003eK20\/K25\/K2500: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK5 Blazer, Jimmy, K10\/K15: 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge (Front Axle):\u003c\/strong\u003e \u003cbr\u003eW100: 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eW200, W250 with Dana 44 axle: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord (Front Axle):\u003cbr\u003e\u003c\/strong\u003eF250 Dana 44 1978, 1979\u003cbr\u003eF250 Regular Cab: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977.5 \u003cbr\u003eBronco: 1971, 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC (Front Axle):\u003c\/strong\u003e \u003cbr\u003e1100, 1200: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC (Rear Axle):\u003c\/strong\u003e \u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep (Front Axle):\u003c\/strong\u003e \u003cbr\u003eJ-Series Truck: 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep (Rear Axle):\u003c\/strong\u003e \u003cbr\u003eCJ5, CJ6: 1972, 1973, 1974, 1975\u003cbr\u003eCherokee, Wagoneer, J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657422118989,"sku":"40633","price":723.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/40633.png?v=1776448744"},{"product_id":"40634-qu40634-dana-44-3-92-up-slow-ratio-empty-open-diff-case-kit","title":"QU40634 Dana 44 3.92-up Slow Ratio Empty Open Diff Case Kit","description":"\u003cp\u003e\u003cstrong\u003eQU40634 New Dana 44 Slow Ratio Empty Open Differential Case Kit\u003c\/strong\u003e is a genuine Dana OEM empty differential case kit for Dana 44 front and rear axles with 3.92 or numerically higher gear ratios.\u003c\/p\u003e \u003cp\u003eThese popular diffs were used by Dodge, Ford, GM, International, and Jeep and they will fit many front\/rear axle applications from 1953 to 1993. Kit includes the bare Diff, ring gear bolts, differential side bearing shims, and differential cover gasket. Assembled in U.S.A with domestic and imported parts.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/40635-qu40635-dana-44-slow-ratio-loaded-open-differ-case-assembly-kit\" target=\"_blank\"\u003eQU40635\u003c\/a\u003e New Dana 44 Loaded Diff Assembly Kit \u003cbr\u003eAlso available while supplies last: \u003ca href=\"\/products\/5530170-qu30170u-used-3-92-up-dana-44-loaded-open-diff-case\" target=\"_blank\"\u003eQU30170U\u003c\/a\u003e Used Dana 44 Loaded Diff\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWear\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eTech Manual \u0026amp; Exploded Views\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpecific Tools\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWear\u003c\/strong\u003e\u003cbr\u003eQU40634 Differentials fit most 1967-1993 Dana 44 axles with 3.92 to 5.89 ratio gear sets. If you need a differential for 2.73 to 3.73 ratio gear sets, see \u003ca href=\"\/products\/40632-qu40632-dana-44-3-73-faster-ratio-empty-open-differential-case-kit\" target=\"_blank\"\u003eQU40632\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eRing Gear Bolts are designed to be used once and only once.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTech Manual \u0026amp; Exploded Views\u003c\/strong\u003e\u003cbr\u003eFor more information about differences between early and late production Dana 44 differential cases including spline and bearing changes, see my \u003ca href=\"\/pages\/dana-44-differential-tech-1953-1993\" target=\"_blank\"\u003e1953-1993 Dana 44 Diff Tech Page\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpecific Tools\u003c\/strong\u003e\u003cbr\u003eRelated items for QU40634 Dana 44 Diff: \u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Differential Bearing and Seal Kit for 1993 and older axles \u003cbr\u003e\u003ca href=\"\/products\/50537-qu50537-timken-dana-44-differential-side-bearing-cup\" target=\"_blank\"\u003eQU50537\u003c\/a\u003e Timken® Differential Side Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50538-qu50538-timken-large-bore-dana-44-or-dana-53-diff-side-bearing\" target=\"_blank\"\u003eQU50538\u003c\/a\u003e Timken® Differential Side Bearing \u003cbr\u003e\u003ca href=\"\/products\/40177-qu40177-dana-44-4-09-ratio-spicer-oem-ring-and-pinion-kit\" target=\"_blank\"\u003eQU40177\u003c\/a\u003e New Genuine Dana 4.09 Ratio Gear Set with Pinion Bearings and small parts \u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal to 1993 \u003cbr\u003e\u003ca href=\"\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger\" target=\"_blank\"\u003eQU40028\u003c\/a\u003e Inner Pinion Bearing Slinger\u003cbr\u003e\u003ca href=\"\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle\" target=\"_blank\"\u003eQU40448\u003c\/a\u003e Inner Pinion Oil Baffle \u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger \u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311\u003c\/a\u003e Diff and Pinion Shim Kit \u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Lock Nut \u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Yoke Washer \u003cbr\u003e\u003ca href=\"\/products\/90009-qu90009-universal-axle-service-pack\" target=\"_blank\"\u003eQU90009\u003c\/a\u003e Axle Service Pack with Gear Marking Compound, Threadlocker, RTV Sealant, Brush \u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032\u003c\/a\u003e Differential Housing Spreader \u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044\u003c\/a\u003e Inner Pinion Bearing Installer \u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812\u003c\/a\u003e Pinion Bearing Cup Installer \u003cbr\u003e\u003ca href=\"\/products\/1115-qt1115-dana-44-differential-side-bearing-installer\" target=\"_blank\"\u003eQT1115\u003c\/a\u003e Differential Side Bearing Installer \u003cbr\u003e\u003ca href=\"\/products\/1035-qt1035-differential-press-step-plate\" target=\"_blank\"\u003eQT1035\u003c\/a\u003e Diff Press Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC (Front Axle):\u003c\/strong\u003e \u003cbr\u003eK20\/K25\/K2500: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK5 Blazer, Jimmy, K10\/K15: 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge (Front Axle):\u003c\/strong\u003e \u003cbr\u003eW100: 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eW200, W250 with Dana 44 axle: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord (Front Axle):\u003c\/strong\u003e \u003cbr\u003eF150, F250 Regular Cab: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977.5\u003cbr\u003eF150, Bronco, Dana 44: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC (Front Axle):\u003c\/strong\u003e \u003cbr\u003e1100, 1200: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC (Rear Axle):\u003c\/strong\u003e \u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep (Front Axle):\u003c\/strong\u003e \u003cbr\u003eJ-Series Truck: 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e Jeep (Rear Axle):\u003c\/strong\u003e \u003cbr\u003eCJ5, CJ6: 1972, 1973, 1974, 1975\u003cbr\u003eCherokee, Wagoneer, J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657422348365,"sku":"40634","price":304.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/40634.jpg?v=1776448743"},{"product_id":"40635-qu40635-dana-44-slow-ratio-loaded-open-differ-case-assembly-kit","title":"QU40635 Dana 44 Slow Ratio Loaded Open Differ Case Assembly Kit","description":"\u003cp\u003e\u003cstrong\u003eQU40635 New Dana 44 Slow Ratio Loaded Open Differential Case Assembly Kit\u003c\/strong\u003e is a genuine Dana OEM loaded differential case kit for Dana 44 front and rear axles with 3.92 or numerically higher gear ratios and 30 spline axle shafts.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657422676045,"sku":"40635","price":649.98,"currency_code":"USD","in_stock":true}]},{"product_id":"40177-qu40177-dana-44-4-09-ratio-spicer-oem-ring-and-pinion-kit","title":"QU40177 Dana 44 4.09 Ratio Spicer OEM Ring and Pinion Kit","description":"\u003cp\u003e\u003cstrong\u003eQU40177 Dana 44 4.09 Ratio Ring and Pinion Set\u003c\/strong\u003e is a genuine Dana OEM 4.09 ratio matched gear set with pinion bearings, pinion seal, ring gear bolts, pinion nut, pinion washer, diff cover gasket, shims, and small parts. The pinion shaft has 26 splines. These popular 4.09 ratio gear sets were used by Dodge, Ford, GM, International, and Jeep and it will fit many front\/rear axle applications from 1953 to 1993.\u003cbr\u003e\u003cbr\u003eAlso available while supplies last: \u003ca href=\"\/products\/5530169-qu30169u-used-dana-44-4-09-ratio-ring-and-pinion-set\" target=\"_blank\"\u003eQU30169U\u003c\/a\u003e USED Dana 44 4.09 Ratio Ring and Pinion gears\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eProduct Note\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eWill Not Fit\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eGear Ratio Change\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eRing Gear Bolts\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003ePinion Preload\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eKit Components\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"#note7\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eQU40177 Gear Set has 45 teeth on the ring gear and 11 teeth on the pinion gear. It is a matched, standard cut gear set that fits most Dana 44 axles that have the pinion gear located below the axle center line. The pinion shaft is the 26 spline configuration used on Dana 44 gear sets since the mid 1960s.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWill Not Fit\u003c\/strong\u003e\u003cbr\u003eQU40177 will not fit Dana 44 series axles in 1966-1996 Ford F100, F150, Bronco or 1977.5-1996 F250. These Ford models have pinion gears mounted above the axle center line and require a reverse spiral gear set.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGear Ratio Change\u003c\/strong\u003e\u003cbr\u003eIf you are doing a gear ratio change, you will also need to change your differential case (the part the ring gear bolts to) if your current ratio is 3.73 or faster. Faster gear ratios have a larger diameter pinion gear than slow ratios so they require a differential case with a different offset. For the Dana 44 axles that can use this gear set, the differential cases are different for 3.73 and numerically lower and 3.92 and numerically higher ratios.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRing Gear Bolts\u003c\/strong\u003e\u003cbr\u003eRing Gear Bolts are designed to be used once and only once.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePinion Preload\u003c\/strong\u003e\u003cbr\u003ePinion preload is set using shims on 1993 and older Dana 44 axles.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eKit Includes:\u003cbr\u003eGenuine Dana 4.09 ratio, matched, standard cut gear set\u003cbr\u003eInner and Outer Pinion Bearings with Cups\u003cbr\u003ePinion Seal, Pinion Nut, Pinion Washer\u003cbr\u003ePinion Oil Slingers\u003cbr\u003eRing Gear Bolts\u003cbr\u003ePinion Depth Shims, Pinion Preload Shims, Differential Shims\u003cbr\u003eDifferential Cover Gasket\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eRelated items for QU40177 gear set:\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Differential Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/5530170-qu30170u-used-3-92-up-dana-44-loaded-open-diff-case\" target=\"_blank\"\u003eQU30170U\u003c\/a\u003e Used Loaded Dana 44 Diff Case 3.92-up\u003cbr\u003e\u003ca href=\"\/products\/40634-qu40634-dana-44-3-92-up-slow-ratio-empty-open-diff-case-kit\" target=\"_blank\"\u003eQU40634\u003c\/a\u003e New Empty Dana 44 Diff Case 3.92-up\u003cbr\u003e\u003ca href=\"\/products\/40635-qu40635-dana-44-slow-ratio-loaded-open-differ-case-assembly-kit\" target=\"_blank\"\u003eQU40635\u003c\/a\u003e New Loaded Dana 44 Diff Case Assembly with Diff Bearings for 3.92-up\u003cbr\u003e\u003ca href=\"\/products\/50537-qu50537-timken-dana-44-differential-side-bearing-cup\" target=\"_blank\"\u003eQU50537\u003c\/a\u003e Timken® Differential Side Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50538-qu50538-timken-large-bore-dana-44-or-dana-53-diff-side-bearing\" target=\"_blank\"\u003eQU50538\u003c\/a\u003e Timken® Differential Side Bearing\u003cbr\u003e\u003ca href=\"\/products\/90009-qu90009-universal-axle-service-pack\" target=\"_blank\"\u003eQU90009\u003c\/a\u003e Axle Service Pack with Gear Marking Compound, Threadlocker, RTV Sealant, Brush\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032\u003c\/a\u003e Differential Housing Spreader\u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044\u003c\/a\u003e Inner Pinion Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812\u003c\/a\u003e Inner\/Outer Pinion Bearing Cup Installer \u003cbr\u003e\u003ca href=\"\/products\/1115-qt1115-dana-44-differential-side-bearing-installer\" target=\"_blank\"\u003eQT1115\u003c\/a\u003e Differential Side Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1035-qt1035-differential-press-step-plate\" target=\"_blank\"\u003eQT1035\u003c\/a\u003e Diff Press Plate\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC (Front Axle)\u003c\/strong\u003e: \u003cbr\u003eK10\/K15\/K1500, K20\/K25\/K2500 May require pinion yoke change to 26 spline): 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eK20\/K25\/K2500: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15: 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC (Rear Axle)\u003c\/strong\u003e: \u003cbr\u003eC10\/C1500 Suburban and truck with Dana 44 axle: 1967, 1968\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge (Front Axle):\u003c\/strong\u003e\u003cbr\u003eW100, W200 (May require pinion yoke change to 26 spline): 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eW100: 1967, 1968, 1969, 1970, 1971, 1972 \u003cbr\u003eW200, W250 with Dana 44 axle: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord (Front Axle):\u003c\/strong\u003e\u003cbr\u003eF100 (May require pinion yoke change to 26 spline): 1959, 1960, 1961, 1962, 1963, 1964, 1965 \u003cbr\u003eF250 (May require pinion yoke change to 26 spline): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eF250 Regular Cab: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1977.5 \u003cbr\u003eBronco: 1971, 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Front Axle):\u003c\/strong\u003e\u003cbr\u003e1\/2 ton and 3\/4 ton (May require pinion yoke change to 26 spline): 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003e1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 1100, 1200\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Rear Axle):\u003c\/strong\u003e\u003cbr\u003e1100: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Front Axle):\u003c\/strong\u003e\u003cbr\u003eJ-Series truck (May require pinion yoke change to 26 spline): 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eJ-Series Truck: 1967, 1968, 1969, 1970, 1971, 1972, 1973 \u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Rear Axle):\u003c\/strong\u003e\u003cbr\u003eWagoneer: 1967, 1968, 1969, 1970, 1971 \u003cbr\u003e1\/2 ton truck: 1971, 1972, 1973 \u003cbr\u003eCJ5, CJ6: 1972, 1973, 1974, 1975 \u003cbr\u003eCherokee, Wagoneer, J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657437880397,"sku":"40177","price":659.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/40177_2_clean__50742_19048__41189.1707882089.1280.1280.png?v=1742526221"},{"product_id":"40180-qu40180-dana-25-dana-44-inner-pinion-bearing-set","title":"QU40180 Dana 25, Dana 44 Inner Pinion Bearing Set","description":"\u003cp\u003e\u003cstrong\u003eQU40180 Dana 25, Dana 44 Inner Pinion Bearing Set \u003c\/strong\u003e for most Dana-Spicer Model 25 and Model 44 front or rear drive axles from 1941 to current. This is a Dana Spicer, original equipment quality bearing that meets or exceeds all vehicle manufacturer specifications making it the top choice for heavy-duty applications like yours. Brand and country of origin may vary, Koyo, NTN, or Timken, and made in Japan or the United States.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBearing Installer\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eAlways Replace\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSet Contents\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eTech Help\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBearing Installer\u003c\/strong\u003e\u003cbr\u003eUse \u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044\u003c\/a\u003e Bearing Installer to set this Bearing on your pinion shaft.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAlways Replace\u003c\/strong\u003e\u003cbr\u003eAlways replace the cup and cone at the same time.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSet Contents\u003c\/strong\u003e\u003cbr\u003eQU40180 includes 1 \u003ca href=\"\/products\/50535-qu50535-dana-25-dana-44-inner-timken-pinion-bearing-cup\" target=\"_blank\"\u003eQU50535\u003c\/a\u003e Bearing Cup, and 1 \u003ca href=\"\/products\/50536-qu50536-dana-25-dana-44-inner-timken-pinion-bearing\" target=\"_blank\"\u003eQU50536\u003c\/a\u003e Bearing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTech Help\u003c\/strong\u003e\u003cbr\u003eRebearing service procedures are covered in my \u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service on Dana-Spicer Monobeam Axles.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40180 Inner Pinion Bearing Set:\u003cbr\u003e\u003ca href=\"\/products\/50537-qu50537-timken-dana-44-differential-side-bearing-cup\" target=\"_blank\"\u003eQU50537\u003c\/a\u003e Diff Side Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50538-qu50538-timken-large-bore-dana-44-or-dana-53-diff-side-bearing\" target=\"_blank\"\u003eQU50538\u003c\/a\u003e Large ID Diff Side Bearing\u003cbr\u003e\u003ca href=\"\/products\/50683-qu50683-small-id-timken-tapered-differential-side-bearing-for-dana-44\" target=\"_blank\"\u003eQU50683\u003c\/a\u003e Small ID Diff Side Bearing\u003cbr\u003e\u003ca href=\"\/products\/50533-qu50533-timken-outer-pinion-bearing-cup\" target=\"_blank\"\u003eQU50533\u003c\/a\u003e Outer Pinion Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50534-qu50534-timken-outer-pinion-bearing\" target=\"_blank\"\u003eQU50534\u003c\/a\u003e Outer Pinion Bearing\u003cbr\u003e\u003ca href=\"\/products\/50539-qu50539-timken-pinion-bearing-cup\" target=\"_blank\"\u003eQU50539\u003c\/a\u003e Late Inner Pinion Bearing Cup for 1992-1996.5 Ford Dana 44IFS\u003cbr\u003e\u003ca href=\"\/products\/50540-qu50540-timken-pinion-bearing\" target=\"_blank\"\u003eQU50540\u003c\/a\u003e Late Inner Pinion Bearing for 1992-1996.5 Ford Dana 44IFS\u003cbr\u003e\u003ca href=\"\/products\/52119-qu52119-timken-inner-pinion-bearing-for-1946-1950-jeep-dana-41-rear\" target=\"_blank\"\u003eQU52119\u003c\/a\u003e Inner Pinion Bearing for 1946-1950 Jeep Model 41 Rear Axle\u003cbr\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service Manual\u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044\u003c\/a\u003e Bearing Installer\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications:\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eUnder Construction but fits numerous Dana 25 and Dana 44 front or rear axles from 1941-current\u003cbr\u003e\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41657438568525,"sku":"40180","price":67.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40180_1200_clean__63795_12004__14329.1707882181.1280.1280.jpg?v=1742526289"},{"product_id":"40187-qu40187-original-equipment-ball-joint-set-for-4x4-front-axles","title":"QU40187 Original Equipment Ball Joint Set for 4x4 Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40187 Original Equipment Ball Joint Set for 4x4 Front Axles\u003c\/strong\u003e are the current production, original equipment, factory lubed, Upper and Lower Ball Joints with hardware for a host of domestic 4x4s from 1969 to 1993. Chevy, Dodge, Ford, GMC, International, and Jeep all used these Ball joints on just about every 4x4 they sold with Dana 30, Dana 44, or GM 10 Bolt solid beam axles with serviceable wheel bearings. We have been selling this great Ball Joint Set since the mid 1970s and it always was and still is the best Ball Joint value for the money.\u003c\/p\u003e \u003cp\u003ePrefer Greaseable Ball Joints? See \u003ca href=\"\/products\/52110-qu52110-greasable-upper-ball-joint-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU52110\u003c\/a\u003e Upper Ball Joint and \u003ca href=\"\/products\/50222-qu50222-greasable-lower-ball-joint-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQU50222\u003c\/a\u003e Lower Ball Joint\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUpper Ball Joint Stud\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eLocation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eIncludes\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eThreaded Adjuster\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Upper Ball Joint Stud\u003c\/strong\u003e\u003cbr\u003eFor removal, the upper ball joint stud needs to be driven down to free it BEFORE you try to loosen the adjuster with optional \u003ca href=\"\/products\/1075-qt1075-1-2-drive-ball-joint-adjuster-sleeve-socket-for-dana-30-dana-44-gm-10-bolt-roxor\" target=\"_blank\"\u003eQT1075\u003c\/a\u003e special 1\/2\" drive spanner socket.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLocation\u003c\/strong\u003e\u003cbr\u003eThe Ball Joints are pressed into the steering knuckle so the knuckle needs to be removed from the vehicle in order to replace the Ball Joints.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003eEach QU40187 Ball Joint Set Includes 1 Each:\u003cbr\u003e Upper Ball Joint, Upper Ball Joint Threaded Adjuster, Upper Ball Joint Nut, Cotter Key for Upper Ball Joint\u003cbr\u003e Lower Ball Joint, Lower Ball Joint Lock Nut, Lower Ball Joint Snap Ring\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThreaded Adjuster\u003c\/strong\u003e\u003cbr\u003eThe Threaded Adjuster is installed in the Axle Yoke AFTER the Lower Ball Joint Nut is tightened. Apply \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" target=\"_blank\"\u003eS9975\u003c\/a\u003e or \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" target=\"_blank\"\u003eS81343\u003c\/a\u003e Anti-Seize Compound to the Adjuster Threads. Torque the Adjuster to 50 lb.-ft. with \u003ca href=\"\/products\/1075-qt1075-1-2-drive-ball-joint-adjuster-sleeve-socket-for-dana-30-dana-44-gm-10-bolt-roxor\" target=\"_blank\"\u003eQT1075\u003c\/a\u003e special 1\/2\" drive spanner socket.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(partial listing)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll K5 Blazer, Jimmy, K10, K15, K1500, V1500, K20, K25, K2500, V2500 with Dana 44 or GM 10 Bolt: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eAll Ramcharger, Trailduster, W100, W150, W200, W250 with open knuckle Dana 44 Axles: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco, F-100, F150: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF-250 with open knuckle Dana 44 Axles: 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1100, 1200 with Dana 44 open knuckle front axles: 1971, 1972, 1973, 1974, 1975\u003cbr\u003eScout and Scout Based Vehicles: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ-5, CJ-6, CJ-7, Scrambler: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003cbr\u003eJ-Series Full Size Cherokee, Cherokee Chief, Grand Wagoneer, 1\/2 ton \u0026amp; 3\/4 ton Trucks, Wagoneer: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41657440174157,"sku":"40187","price":194.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40187clean__72021_9111__11370.1707882526.1280.1280.jpg?v=1742526589"},{"product_id":"40214-qu40214-dana-44-differential-cover-gasket","title":"QU40214 Dana 44 Differential Cover Gasket","description":"\u003cp\u003e\u003cstrong\u003e QU40214 Dana 44 Differential Cover Gasket\u003c\/strong\u003e is a genuine original equipment Dana Fiber Gasket for all Dana-Spicer Model 44 axles. Can be used instead of or in conjunction with an RTV sealant. Genuine Dana gasket is precision cut from high grade, crush resistant gasket material with clean die cuts specifically for the Dana 44 series axles. USA Made.\u003c\/p\u003e \u003cp\u003eAlso see: \u003ca href=\"\/products\/42028-qu42028-dana-44-reusable-diff-cover-gasket\"\u003eQU42028 Dana 44 Reusuable Differential Cover Gasket\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eAvailable Gasket Part Numbers\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eDesign\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eReusable Option\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAvailable Gasket Part Numbers\u003c\/strong\u003e\u003cbr\u003eWe stock Spicer High-Performance Reusable gaskets for many applications. Below is a list of both the standard and High Performance gasket numbers for popular axles:\u003c\/p\u003e \u003ctable style=\"border-color: #000000; border-style: solid; border-width: 1px\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center\"\u003e\u003cstrong\u003eAxle Model\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003cstrong\u003eReusable\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eDana 30\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/40236-qu40236-dana-25-dana-27-dana-30-differential-cover-gasket\" target=\"_blank\"\u003eQU40236\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42027-qu42027-dana-25-dana-27-dana-30-reusable-differential-cover-gasket\" target=\"_blank\"\u003eQU42027\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eDana 44\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003eQU40214\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42028-qu42028-dana-44-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42028\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eDana 50 Ford 1999-2005\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/40367-qu40367-dana-60-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU40367\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42029-qu42029-dana-50-60-high-performance-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42029\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eDana 60, Dana 61\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/40367-qu40367-dana-60-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU40367\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42029-qu42029-dana-50-60-high-performance-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42029\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eDana 70, Dana 70HD\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/40367-qu40367-dana-60-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU40367\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42030-qu42030-reusable-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU42030\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eDana 80\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003eRTV \u003ca href=\"\/products\/82194-s82194-3-5oz-ultra-gray-rtv\" target=\"_blank\"\u003eS82194\u003c\/a\u003e\n\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42031-qu42031-dana-80-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42031\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFord Sterling 10.25\" and 10.5\" 1985-up\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/40400-qu40400-rear-differential-cover-gasket\" target=\"_blank\"\u003eQU40400\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42032-qu42032-Reusable-differential-cover-gasket-for-ford-10-25-10-5-rear-axles\" target=\"_blank\"\u003eQU42032\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eGM 10.5\" 14 Bolt Full Float 1973-up\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/50698-qu50698-gm-14-bolt-rear-differential-cover-gasket\" target=\"_blank\"\u003eQU50698\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42036-qu42036-spicer-gm-14b-reusable-high-performance-diff-cover-gasket\" target=\"_blank\"\u003eQU42036\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eChrysler\/Dodge 9.25\" Rear Axle 1974-2007\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/50687-qu50687-rear-differential-cover-gasket-for-chrysler-9-1-4-rear-axles\" target=\"_blank\"\u003eQU50687\u003c\/a\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003e\u003ca href=\"\/products\/42037-qu42037-reusable-high-performance-rear-differential-cover-gasket\" target=\"_blank\"\u003eQU42037\u003c\/a\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e  \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDesign\u003c\/strong\u003e\u003cbr\u003e Starting in the 1970's, Dana-Spicer switched from light gauge steel covers with embossed mating flanges to heavy gauge covers with flat mating flanges. Gaskets were used to seal the early covers, but the late covers used RTV sealant instead of gaskets. Due to the Design of the older covers, you MUST use a cut gasket for a leak proof seal between the cover and diff housing. With the late, flat flange covers, you can use either RTV or a cut gasket or even a combination of gasket and a thin film of RTV sealant. The advantage of RTV, is that properly installed on clean dry surfaces and using a grade of RTV that is resistant to gear lubricants (see \u003ca href=\"\/products\/82194-s82194-3-5oz-ultra-gray-rtv\" target=\"_blank\"\u003eS82194\u003c\/a\u003e RTV), it will not leak. The disadvantage is the covers sealed with RTV are hard to remove at the next service interval and once removed, the RTV residue stuck to the mating flanges must be laboriously cleaned off both surfaces. Many people now use a cut gasket with a thin bead of RTV on each side which simplifies removal and cleaning but still provides a leak-proof seal.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eReusable Option\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/42028-qu42028-dana-44-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42028\u003c\/a\u003e Dana 44 Reusable Gasket is manufactured by Dana-Spicer. These excellent gaskets feature a woven steel core, non-asbestos facing, and are coated with Teflon® so the gasket does not stick to your axle housing or cover. Do NOT use RTV sealant with reusable gaskets!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/20381-qu20381u-used-1969-5-1975-f250-empty-dana-44-front-axle-housing\" target=\"_blank\"\u003eQU20381U\u003c\/a\u003e Bare Front Axle Housing 73-75 F-250 Dana 44 Closed Knuckle 3300 pound Front Axle\u003cbr\u003e\u003ca href=\"\/products\/82194-s82194-3-5oz-ultra-gray-rtv\" target=\"_blank\"\u003eS82194\u003c\/a\u003e RTV Sealant (Not for use with \u003ca href=\"\/products\/42028-qu42028-dana-44-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42028\u003c\/a\u003e Reusable Gaskets)\u003cbr\u003e\u003ca href=\"\/products\/42015-qu42015-inner-front-axle-shaft-seal-for-dana-44-and-dana-60\" target=\"_blank\"\u003eQU42015\u003c\/a\u003e Seal\u003cbr\u003e\u003ca href=\"\/products\/40367-qu40367-dana-60-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU40367\u003c\/a\u003e Original Equipment Dana Spicer Dana 60 Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/42029-qu42029-dana-50-60-high-performance-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42029\u003c\/a\u003e Spicer Reusable Dana 60 Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Inner Axle Seal Remover Tool Set\u003cbr\u003e\u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Unitized Seal and Guide\u003cbr\u003e\u003ca href=\"\/products\/442051-d442051-1967-1991-dana-44-differential-cover-kit-chevy-ford-jeep\" target=\"_blank\"\u003eD442051\u003c\/a\u003e Dana 44 Differential Cover Pan Kit\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e Specific vehicle applications for these gaskets are to numerous to mention. \u003cbr\u003eThis gasket can be used on all Model 44 and Model 44HD axles\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657452953677,"sku":"40214","price":16.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40214_top_1200_clean__33767_12568__89341.1707883440.1280.1280.jpg?v=1742527400"},{"product_id":"40215-qu40215-dana-axle-pinion-seal","title":"QU40215 Dana Axle Pinion Seal","description":"\u003cp\u003e\u003cstrong\u003eQU40215 Dana Axle Pinion Seal\u003c\/strong\u003e is an original equipment spec pinion double lip pinion yoke seal manufactured by the Dana supplier for this seal since the 1970's. Fits most 1940s to early 1990s Dana 25, Dana 27, Dana 30, or Dana 44 front or rear axles. The inboard face of the seal shell has a bead of pliable factory applied sealant. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eGrease\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eOriginal Equipment\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSeal without Deflector \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGrease\u003c\/strong\u003e\u003cbr\u003eThe seal lip is pre-greased. Lightly grease the pinion yoke seal surface to provide initial lubrication prior to installing the yoke on the axle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOriginal Equipment\u003c\/strong\u003e\u003cbr\u003eQU40215 was original equipment on older axles in which the pinion bearing preload was set by shims.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeal without Deflector\u003c\/strong\u003e\u003cbr\u003eQU40215 features a deflector that matches a groove in the pinion slinger used on older axles. Dana has consolidated Pinion Seal numbers and is now replacing QU40215 Seal with lower cost \u003ca href=\"\/products\/40461-qu40461-dana-30-44-50ifs-oem-pinion-seal\" target=\"_blank\"\u003eQU40461\u003c\/a\u003e Seal which does not have the deflector. I believe the QU40215 deflector provides better protection for the seal lip so we do not use \u003ca href=\"\/products\/40461-qu40461-dana-30-44-50ifs-oem-pinion-seal\" target=\"_blank\"\u003eQU40461\u003c\/a\u003e in place of QU40215 in our Kits but you can do so if you wish.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eThe matching axle parts for QU40215 seal are:\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Washer\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Dana 44 Front Axle Diff Bearing and Seal Kit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eFits most 1940s to early 1990s Dana 25, Dana 27, Dana 30, or Dana 44 Front or Rear Axles\u003cbr\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657453215821,"sku":"40215","price":29.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40215_3294_1600__12404_21496__76922.1707883505.1280.1280.png?v=1742527437"},{"product_id":"40792-qu40792-1-1-16-cup-axle-universal-joint-non-greaseable","title":"QU40792 1-1\/16\" Cup Axle Universal Joint, Non-Greaseable","description":"\u003cp\u003e\u003cstrong\u003eQU40792 Non-Greaseable Small Axle Universal Joint for Vintage Dana Spicer Open Knuckle Front Axles\u003c\/strong\u003e is a genuine original equipment axle manufacturer, solid-cross, non-greaseable, front axle u-joint for late 1960s to early 1970s vintage Chevy, Dodge, Ford, GMC, IHC 1\/2 ton and 3\/4 ton light duty 4x4s with Dana 44 open knuckle front drive axles. Also fits Ford Bronco, IHC Scout, and Jeep CJ 4x4s with Dana 30 front axles.\u003c\/p\u003e \u003cp\u003eAlso See \u003ca href=\"\/products\/40822-qu40822-1-1-16-cap-axle-universal-joint-greaseable\" target=\"_blank\"\u003eQU40822\u003c\/a\u003e Greaseable Small Axle Universal Joint\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eU-Joint Specs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eU-Joint Specs \u003c\/strong\u003e\u003cbr\u003eQU40792 has the heaviest cross we know of for this size of axle u-joint. QU40792 is an internal c-clip retained, axle universal joint with a cup diameter of 1-1\/16\". The inside span between your axle shaft yoke ears should be 2-3\/16\". The physical dimensions of this series of axle joint means is marginal for full size truck applications which is probably why it was only used for a few years in 1\/2 ton and 3\/4 ton class vehicles.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for Axle U-Joints:\u003cbr\u003e\u003ca href=\"\/products\/4734-qk4734-pair-of-spindle-bearings-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQK4734\u003c\/a\u003e Spindle Axle Shaft Bearing\u003cbr\u003e\u003ca href=\"\/products\/40232-qu40232-early-type-brass-axle-shaft-spindle-thrust-washer\" target=\"_blank\"\u003eQU40232\u003c\/a\u003e Bronze Spindle Thrust Washer for Early Production Vehicles\u003cbr\u003e\u003ca href=\"\/products\/40043-qu40043-early-type-dana-front-axle-one-piece-spindle-seal\" target=\"_blank\"\u003eQU40043\u003c\/a\u003e 2\" ID Spindle Seal for Early Production Axles\u003cbr\u003e\u003ca href=\"\/products\/40228-qu40228-spindle-bearing-and-seal-kit-for-dana-30-44-44ifs-gm-10-bolt\" target=\"_blank\"\u003eQU40228\u003c\/a\u003e Spindle Seal and Bearing Kit for Later Production Axles (Large Seal ID is 2-1\/4\")\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eBlazer with Open Knuckle Front Axle: 1969\u003cbr\u003eGM 4x4 Dana 44 Open Knuckle Axle in Suburban, K10, K15, K20, K25: 1970, 1971, 1972.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e\u003cbr\u003eW100, W200 with Dana 44 Open Knuckle Front Axle and small u-joint: 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eBronco Dana 30 Open Knuckle Axle: 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eF-100 Dana 44 Open Knuckle Axle: 1967, 1968, 1969, 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational\u003c\/strong\u003e\u003cbr\u003eScout with Dana 30 Open Knuckle Front Axles: 1972, 1973, 1974, 1975, 1976, 1977\u003cbr\u003e1\/2 Ton Truck: 1971.5, 1972, 1973.5\u003cbr\u003eScout with Dana 44 Front Axle: 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e\u003cbr\u003eCJ Series: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003ePartial XJ with Dana 30: 1987, 1988, 1989, 1990, 1991, 1992\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41657543163981,"sku":"40792","price":53.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40792__38314_9466__46300.1707886458.1280.1280.jpg?v=1742529736"},{"product_id":"52110-qu52110-greasable-upper-ball-joint-for-dana-30-dana-44-gm-10-bolt-axles","title":"QU52110 Greasable Upper Ball Joint for Dana 30, Dana 44, GM 10 Bolt Axles","description":"\u003cp\u003e\u003cstrong\u003eQU52110 Greasable Upper Ball Joint\u003c\/strong\u003e for Most 1970-1993 Dana 44, 1970-1986 Dana 30, and 1977-1991 GM 10 Bolt Solid Beam Axles. Sold individually. Note: Color of Rubber Seal either blue or black, no choice, same brand.\u003c\/p\u003e \u003cp\u003eMatching Lower Ball Joint is \u003ca href=\"\/products\/50222-qu50222-greasable-lower-ball-joint-for-dana-30-dana-44-gm-10-bolt-front-axles\" target=\"_blank\"\u003eQU50222\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003eAlso See \u003ca href=\"\/products\/40187-qu40187-original-equipment-ball-joint-set-for-4x4-front-axles\" target=\"_blank\"\u003eQU40187\u003c\/a\u003e (Non-greaseable) Genuine Dana OEM Ball Joint Set for Dana 30, Dana 44, and GM 10 Bolt Solid Beam Front Axles.\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657620529229,"sku":"52110","price":67.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu52110_thmb__03420_24221__48009.1707889284.1280.1280.png?v=1742532405"},{"product_id":"56018-qu56018-warn-9790-standard-lockout-hub-set","title":"QU56018 WARN 9790 Standard Lockout Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU56018 WARN 9790 Standard Lockout Hub Set\u003c\/strong\u003e is a reliable, original equipment quality 4x4 Free-Wheel Hub Set with rugged, time proven plastic dials for internally splined front wheel hubs on 1957-1994 Ford, 1969-1993 Dodge, 1969-1991 Chevy, 1969-1991 GMC, 1964-1973 IHC, and 1974-1991 Jeep 4x4 vehicles. Warn 9790 Lockout Hub Set was used on many original equipment axles from 1980-1992. Perfect for replacement or upgrade, 9790 Hub Set fits most Dana 30, Dana 44, Dana 44HD, Dana 44IFS, and GM 10 bolt Front Drive Axles equipped with splined front wheel hubs. QU56018 Warn 9790 Hub Set includes 2 M248 Hubs with Hardware.\u003c\/p\u003e \u003cp\u003eWARN 9790 Standard Hubs are the ideal choice for OEM hub replacement. These are the same basic hubs Warn Industries has supplied to OEMs around the world. WARN standard hubs share many features with our premium hubs such as a 4140 steel clutch ring and inner drive gear and a precision cast hub body. Warn 9790 hubs are covered by a lifetime limited warranty.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/5556018-qu56018u-used-warn-internal-spline-mount-manual-hub-set\" target=\"_blank\"\u003eQU56018U\u003c\/a\u003e Used Hub Set available while supplies last\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHub Service Kit\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eBefore Installation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpindle Nuts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eSpring and Spring Plate\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Service Kit\u003c\/strong\u003e\u003cbr\u003eFor QU56018 Hub Service Kit, See: \u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eLightly coat the axle shaft and wheel hub splines with grease before installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpindle Nuts\u003c\/strong\u003e\u003cbr\u003eFord models originally equipped with automatic hubs and a single spindle nut will require replacing the original spindle nuts with two \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Sets.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpring and Spring Plate\u003c\/strong\u003e\u003cbr\u003eIf you are replacing a Spicer factory hub set or Spicer\/GM full time drive gear, you DO NOT reuse the original \u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring and \u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Cupped Spring Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInner Thrust Washers and Snap Rings\u003c\/strong\u003e\u003cbr\u003eSome original axle shafts had an axle shaft snap ring located back by the spindle. Typically, these snap rings retained either a one-piece or three-piece thrust washer against the spindle. On most of these later model applications, the inner thrust washer(s) and snap ring are NOT used with this hub!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU56018 Hub Set:\u003cbr\u003e\u003ca href=\"\/products\/4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set\" target=\"_blank\"\u003eQK4918\u003c\/a\u003e Hub Service Kit\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut and Washer Set\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eBlazer, Jimmy, 1\/2 ton Pickup and Suburban: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e3\/4 ton Pickup and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Plymouth:\u003c\/strong\u003e\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eRamcharger, Trailduster, W100, W200 (with Dana 44 Axle): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150 (except 1987-1989 with flange mount hub-locks): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF250 with standard Dana 44 closed knuckle axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eBronco (except 1987-1989 with flange mount hub-locks): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992\u003cbr\u003eF-250 with Dana 44 or Dana 44IFS Front Axles: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1\/2 ton with internally splined wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eFull Size Wagoneer, Cherokee, Grand Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10 Pickup: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20 Pickup: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":41657643401293,"sku":"56018","price":178.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU56018_Hub_clean__07485_18854__68200.1707889507.1280.1280.jpg?v=1742532621"},{"product_id":"56019-qu56019-1-side-warn-internal-spline-mount-manual-hub-set","title":"QU56019 1 Side Warn Internal Spline Mount Manual Hub Set","description":"\u003cp\u003eTHIS PART HAS BEEN SUPERSEDED BY \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e (does both sides).\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQU56019 1 Side Warn Original Equipment Type Internal Spline Mount Manual Hub Set\u003c\/strong\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657649430605,"sku":"56019","price":85.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/4302553067024381695-49963__20528_3588__94823.1707889517.1280.1280.jpg?v=1742532631"},{"product_id":"50222-qu50222-greasable-lower-ball-joint-for-dana-30-dana-44-gm-10-bolt-front-axles","title":"QU50222 Greasable Lower Ball Joint for Dana 30, Dana 44, GM 10 Bolt Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQU50222 Lower Greaseable Ball Joint\u003c\/strong\u003e for most 1970-1993 Dana 44, 1970-1986 Dana 30, 1977-1991 GM 10 bolt solid beam axles and Ford F150, F250, Bronco, Dana 44 1978-1979, 1980-1996 Ford Dana 44 IFS Front Axles. Sold individually. Note: Color of Rubber Seal either blue or black, no choice, same brand.\u003c\/p\u003e \u003cp\u003eMatching Upper Ball Joint for solid beam front axles is \u003ca href=\"\/products\/52110-qu52110-greasable-upper-ball-joint-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU52110\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003eMatching Upper Ball Joint for 1980-1996 Ford Dana 44IFS Front Axle is \u003ca href=\"\/products\/50095-qa50095-greaseable-upper-ball-joint\" target=\"_blank\"\u003eQA50095\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003eAlso See \u003ca href=\"\/products\/40187-qu40187-original-equipment-ball-joint-set-for-4x4-front-axles\" target=\"_blank\"\u003eQU40187\u003c\/a\u003e (Non-greaseable) Genuine Dana OEM Ball Joint Set for Dana 30, Dana 44, and GM 10 Bolt Solid Beam Front Axles.\u003c\/p\u003e ","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657712410701,"sku":"50222","price":63.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu50222clean__35862_9814__77183.1707890884.1280.1280.jpg?v=1742533947"},{"product_id":"50225-qu50225-inner-front-wheel-seal-for-ihc-1-2-ton-truck-scout-jeep-cj","title":"QU50225 Inner Front Wheel Seal for IHC 1\/2 Ton Truck, Scout, \u0026 Jeep CJ","description":"\u003cp\u003e\u003cstrong\u003eQU50225 Inner Front Wheel Seal for IHC Scout, IHC 1\/2 ton Truck, and Jeep CJ\u003c\/strong\u003e is a premium double lip front wheel grease Seal for 1971.5-1980 International Scout II, 1974-1975 International 100\/150 1\/2 ton 4x4 Truck and 1976-1980 Disc Brake equipped Jeep CJ's. Made in U.S.A. or Mexico.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eInstall Tool\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSeal Features \u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003e1981-1\u003ca href=\"#note5\"\u003e\u003cstrong\u003e1981-1986 Jeep CJ\u003c\/strong\u003e\u003c\/a\u003ean style=\"color: #ff0000\"\u0026gt;\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e \u003cstrong\u003eLubricate Seal Lip \u003c\/strong\u003e\u003cbr\u003eLubricate the Seal Lip with clean grease to provide initial lubrication.\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstall Tool \u003c\/strong\u003e\u003cbr\u003eMore wheel seals are wrecked from poor installation procedures than from any other cause. Use \u003ca href=\"\/products\/1508-qt1508-front-wheel-seal-installer-for-ihc-scout-jeep-cj-scrambler\" target=\"_blank\"\u003eQT1508\u003c\/a\u003e Seal Installer with a \u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e series driver handle to seat the seal square in the hub bore, without damage. After the seal is installed, lubricate the seal lips with clean wheel bearing grease.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeal Features\u003c\/strong\u003e\u003cbr\u003eQU50225 is a 1\/4\" wide Double Lip Grease Seal designed to fit disc brake hubs with shallow seal bores. QU50225 features an outer wiper lip to deflect dust, water, and grit. The inner seal lip retains your wheel bearing grease.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e1971-1980 IHC Scout II, \u003cstrong\u003e1974-1975 IHC 100, 150 1\/2 ton, \u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e1976-1980 \u003cstrong\u003eDisc Brake Equipped \u003c\/strong\u003eJeep CJ Series: \u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU50225 Front Wheel Seal in 1976-1980 Jeep CJ Series with Disc Brakes, 1974-1975 IHC 1\/2 ton Truck, and 1972-1980 IHC Scout II (including Terra and Traveler):\u003cbr\u003e\u003ca href=\"\/products\/sku-xvj110-1977-1978-5-jeep-cj-7-dana-30-front-wheel-hub-exploded-view\"\u003eXVJ110\u003c\/a\u003e 1977-1978.5 Jeep CJ7 Dana 30 Front Wheel Hub Exploded View\u003cbr\u003e\u003ca href=\"\/products\/50629-qu50629-timken-tapered-roller-bearing-cup\" target=\"_blank\"\u003eQU50629\u003c\/a\u003e Inner Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50630-qu50630-timken-taper-bearing-used-for-wheel-diff-and-transmissions\" target=\"_blank\"\u003eQU50630\u003c\/a\u003e Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447\u003c\/a\u003e Outer Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/4669-qk4669-hex-spindle-nut-kit-for-jeeps-and-ihc-scouts\" target=\"_blank\"\u003eQK4669\u003c\/a\u003e Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/15005-qu15005-6-bolt-front-hub-gasket\" target=\"_blank\"\u003eQU15005\u003c\/a\u003e Hub Gasket\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex Synthetic Grease\u003cbr\u003e\u003ca href=\"\/products\/881011-qt1011-2-1-16-hex-front-spindle-nut-socket-jeep-ihc\" target=\"_blank\"\u003eQT1011\u003c\/a\u003e 2-1\/8\" Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/1508-qt1508-front-wheel-seal-installer-for-ihc-scout-jeep-cj-scrambler\" target=\"_blank\"\u003eQT1508\u003c\/a\u003e Wheel Seal Installer\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1981-1986 Jeep CJ\u003c\/strong\u003e\u003cbr\u003eAlthough 1981-1986 Jeep CJ models use the same front wheel bearings as older models, the wheel seals are different:\u003cbr\u003e\u003ca href=\"\/products\/15015-qu15015-inner-front-wheel-seal-for-1981-1983-jeep-cj-scrambler\" target=\"_blank\"\u003eQU15015\u003c\/a\u003e Wheel Seal 1981-1983 Jeep CJ\u003cbr\u003e\u003ca href=\"\/products\/15016-qu15016-inner-front-wheel-seal-for-1984-1986-jeep-cj-scrambler\" target=\"_blank\"\u003eQU15016\u003c\/a\u003e Wheel Seal 1984-1986 Jeep CJ\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e100, 150 1\/2 ton Truck: 1973, 1974, 1975\u003cbr\u003eScout II Front: 1971.5, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eIHC 200 with Dana 44 Open Knuckle Front Axle: 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ-7: 1976, 1977, 1978, 1979, 1980\u003cbr\u003eCJ-5: 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657716244557,"sku":"50225","price":22.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu50225__88651_9816__32029.1707891030.1280.1280.jpg?v=1742534053"},{"product_id":"40427-qu40427-new-front-hub-cap-for-dana-44-and-gm-10-bolt-axles","title":"QU40427 New Front Hub Cap for Dana 44 and GM 10 Bolt Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40427 GM 10 Bolt and Dana 44 Full Time Front End Hub Cap \u003c\/strong\u003eis a genuine Dana replacement part for 1959-1993 Chevy, Dodge, Ford, GMC, and Jeep 4x4 SUVs and trucks with Dana 44 or GM 10 bolt front axles. These steel Caps are the redesigned cap that was introduced in the 1980's and it is the final production Dana replacement part for QU40427 early model cap that was made from a little heavier gauge of steel. Cap is no longer chrome!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eNo Lockouts\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eInstallation and Sealing\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eDesign Change \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNo Lockouts \u003c\/strong\u003e\u003cbr\u003eQU40427 Dana 44 Hub Cap fits the open end of internally splined Dana 44 front wheel hubs that do NOT have locking hubs including 1973-1979 Chevy, Ford, GMC, and Jeep models with full time Dana 44 or GM 10 bolt front axles. Also fits mid 1980s to 1990s Dodge and Jeep 4x4s with vacuum controlled Central Axle Disconnect (CAD) Dana 44 front axles.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallation and Sealing\u003c\/strong\u003e\u003cbr\u003eQU40427 is an interference fit part so it needs to be tapped into position with a soft-faced hammer. To provide maximum sealing, I apply a thin bead of RTV sealant around the outside part of the cap that will fit against the wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDesign Change\u003c\/strong\u003e\u003cbr\u003eQU40427 is a NEW medium gauge cap, it is functionally interchangeable with heavy gauge production caps used in 1960s and 1970s era 4x4s.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU40427 Hub Cap:\u003cbr\u003e\u003ca href=\"\/products\/40598-qu40598-1-1-4-wide-stepped-hub-drive-gear\" target=\"_blank\"\u003eQU40598\u003c\/a\u003e\/\u003ca href=\"\/products\/5540428-qu40428u-used-7-8-wide-single-width-hub-drive-gear\" target=\"_blank\"\u003eQU40428U\u003c\/a\u003e\/\u003ca href=\"\/products\/5540657-qu40657u-used-7-8-wide-hub-gear-with-step\" target=\"_blank\"\u003eQU40657U\u003c\/a\u003e Splined Hub Gears\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e and \u003ca href=\"\/products\/40614-qu40614-inverted-lug-outer-axle-shaft-snap-ring\" target=\"_blank\"\u003eQU40614\u003c\/a\u003e Axle Shaft Snap Rings for manual hubs.\u003cbr\u003e\u003ca href=\"\/products\/40035-qu40035-hub-spring-plate-or-spring-cup-for-splined-4x4-wheel-hubs\" target=\"_blank\"\u003eQU40035\u003c\/a\u003e Spring Plate\u003cbr\u003e\u003ca href=\"\/products\/40050-qu40050-spicer-hub-spring-for-dana-30-dana-44-gm-10-bolt-axles\" target=\"_blank\"\u003eQU40050\u003c\/a\u003e Spring\u003cbr\u003e\u003ca href=\"\/products\/40654-qu40654-1-25-long-split-dana-44-hub-drive-gear-spacer\" target=\"_blank\"\u003eQU40654\u003c\/a\u003e 1-1\/4\" long Split Steel Steel Spacer\u003cbr\u003e\u003ca href=\"\/products\/40221-qu40221-19-spline-outer-front-axle-shaft-for-gm-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU40221\u003c\/a\u003e Outer Axle Shaft for 1973-1991 GM Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Lockout Hub Set (Replaces all the original hub drive parts including this part)\u003cbr\u003e\u003ca href=\"\/products\/90005-qu90005-small-0-5-ounce-tube-ultra-black-rtv-sealant\" target=\"_blank\"\u003eQU90005\u003c\/a\u003e RTV Sealant\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC\u003c\/strong\u003e: \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15\/K1500\/V1500 Truck and Suburban: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eK20\/K25\/K2500\/V2500 Truck and Suburban: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250 with Dana 44 axle: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150 (Dana 44): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003eBronco (Dana 30, Dana 44): 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, Bronco with Splined Wheel Hub (Dana 44IFS): 1988, 1989\u003cbr\u003eF150 and Bronco (Dana 44IFS): 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 with 3330 Pound Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF250 (Dana 44): 1978, 1979 \u003cbr\u003eF250 (Dana 44IFS): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e1100 with internal spline wheel hub: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, Wagoneer: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJ10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eJ20: 1977.5, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657742491725,"sku":"40427","price":27.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40427_114008_1600__89356.1728658099.1280.1280.png?v=1742534805"},{"product_id":"40447-qu40447-genuine-dana-3-54-ratio-ring-and-pinion-kit","title":"QU40447 Genuine Dana 3.54 Ratio Ring and Pinion Kit","description":"\u003cp\u003e\u003cstrong\u003eQU40447 Dana 44 3.54 Ratio Ring and Pinion Set\u003c\/strong\u003e is a replacement 3.54 ratio matched gear set with OE Dana pinion bearings, pinion seal, ring gear bolts, pinion nut, pinion washer, diff cover gasket, shims, and small parts. The pinion shaft has 26 splines. These popular 3.54 ratio gear sets were used by Dodge, Ford, GM, International, and Jeep and it will fit many front\/rear axle applications from 1953 to 1993.\u003cbr\u003e\u003cbr\u003eSee \u003ca href=\"\/products\/441487-d441487-gear-set\"\u003eD441487 for Ring and Pinion\u003c\/a\u003e Only Set\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eProduct Note\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eWill Not Fit\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eGear Ratio Change\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eRing Gear Bolts\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003ePinion Preload\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eKit Components\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"#note7\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eQU40447 Gear Set has 46 teeth on the ring gear and 13 teeth on the pinion gear. It is a matched, standard cut gear set that fits most Dana 44 axles that have the pinion gear located below the axle center line. The pinion shaft is the 26 spline configuration used on Dana 44 gear sets since the mid 1960s.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWill Not Fit\u003c\/strong\u003e\u003cbr\u003eQU40447 will not fit Dana 44 series axles in 1966-1996 Ford F100, F150, Bronco or 1977.5-1996 F250. These Ford models have pinion gears mounted above the axle center line and require a reverse spiral gear set.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGear Ratio Change\u003c\/strong\u003e\u003cbr\u003eIf you are doing a gear ratio change, you will also need to change your differential case (the part the ring gear bolts to) if your current ratio is 3.92 or slower. Slower gear ratios have a smaller diameter pinion gear than fast ratios so they require a differential case with a different offset. For the Dana 44 axles that can use this gear set, the differential cases are different for 3.73 and numerically lower and 3.92 and numerically higher ratios.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRing Gear Bolts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40209-qu40209-dana-44-ring-gear-bolt\"\u003eQU40209 Ring Gear Bolts\u003c\/a\u003e are designed to be used once and only once.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePinion Preload\u003c\/strong\u003e\u003cbr\u003ePinion preload is set using shims on 1993 and older Dana 44 axles.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eKit Includes:\u003cbr\u003eReplament 3.54 ratio, matched, standard cut gear set\u003cbr\u003eInner and Outer Pinion Bearings with Cups\u003cbr\u003ePinion Seal, Pinion Nut, Pinion Washer\u003cbr\u003ePinion Oil Slingers\u003cbr\u003eRing Gear Bolts\u003cbr\u003ePinion Depth Shims, Pinion Preload Shims, Differential Shims\u003cbr\u003eDifferential Cover Gasket\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eRelated items for QU40447 gear set:\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" rel=\"noopener\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Differential Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/5540675-qu40675u-used-loaded-dana-44-30-spline-open-diff-assembly\"\u003eQU40675U\u003c\/a\u003e Used Loaded Dana 44 Diff Case 3.73-down\u003cbr\u003e\u003ca href=\"\/products\/40632-qu40632-dana-44-3-73-faster-ratio-empty-open-differential-case-kit\"\u003eQU40632\u003c\/a\u003e New Empty Dana 44 Diff Case 3.73-down\u003cbr\u003e\u003ca href=\"\/products\/40633-qu40633-dana-44-fast-ratio-loaded-open-diff-case-assembly-kit\"\u003eQU40633\u003c\/a\u003e New Loaded Dana 44 Diff Case Assembly with Diff Bearings for 3.73-down\u003cbr\u003e\u003ca href=\"\/products\/50537-qu50537-timken-dana-44-differential-side-bearing-cup\" rel=\"noopener\" target=\"_blank\"\u003eQU50537\u003c\/a\u003e Timken® Differential Side Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50538-qu50538-timken-large-bore-dana-44-or-dana-53-diff-side-bearing\" rel=\"noopener\" target=\"_blank\"\u003eQU50538\u003c\/a\u003e Timken® Differential Side Bearing\u003cbr\u003e\u003ca href=\"\/products\/90009-qu90009-universal-axle-service-pack\" rel=\"noopener\" target=\"_blank\"\u003eQU90009\u003c\/a\u003e Axle Service Pack with Gear Marking Compound, Threadlocker, RTV Sealant, Brush\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" rel=\"noopener\" target=\"_blank\"\u003eQT1032\u003c\/a\u003e Differential Housing Spreader\u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" rel=\"noopener\" target=\"_blank\"\u003eQT1044\u003c\/a\u003e Inner Pinion Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" rel=\"noopener\" target=\"_blank\"\u003eQT1812\u003c\/a\u003e Inner\/Outer Pinion Bearing Cup Installer \u003cbr\u003e\u003ca href=\"\/products\/1115-qt1115-dana-44-differential-side-bearing-installer\" rel=\"noopener\" target=\"_blank\"\u003eQT1115\u003c\/a\u003e Differential Side Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1035-qt1035-differential-press-step-plate\" rel=\"noopener\" target=\"_blank\"\u003eQT1035\u003c\/a\u003e Diff Press Plate\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC (Front Axle)\u003c\/strong\u003e: \u003cbr\u003eK10\/K15\/K1500, K20\/K25\/K2500 May require pinion yoke change to 26 spline): 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eK20\/K25\/K2500: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15: 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC (Rear Axle)\u003c\/strong\u003e: \u003cbr\u003eC10\/C1500 Suburban and truck with Dana 44 axle: 1967, 1968\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge (Front Axle):\u003c\/strong\u003e\u003cbr\u003eW100, W200 (May require pinion yoke change to 26 spline): 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eW100: 1967, 1968, 1969, 1970, 1971, 1972 \u003cbr\u003eW200, W250 with Dana 44 axle: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord (Front Axle):\u003c\/strong\u003e\u003cbr\u003eF100 (May require pinion yoke change to 26 spline): 1959, 1960, 1961, 1962, 1963, 1964, 1965 \u003cbr\u003eF250 (May require pinion yoke change to 26 spline): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eF250 Regular Cab: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1977.5 \u003cbr\u003eBronco: 1971, 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Front Axle):\u003c\/strong\u003e\u003cbr\u003e1\/2 ton and 3\/4 ton (May require pinion yoke change to 26 spline): 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003e1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 1100, 1200\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Rear Axle):\u003c\/strong\u003e\u003cbr\u003e1100: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Front Axle):\u003c\/strong\u003e\u003cbr\u003eJ-Series truck (May require pinion yoke change to 26 spline): 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eJ-Series Truck: 1967, 1968, 1969, 1970, 1971, 1972, 1973 \u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Rear Axle):\u003c\/strong\u003e\u003cbr\u003eWagoneer: 1967, 1968, 1969, 1970, 1971 \u003cbr\u003e1\/2 ton truck: 1971, 1972, 1973 \u003cbr\u003eCJ5, CJ6: 1972, 1973, 1974, 1975 \u003cbr\u003eCherokee, Wagoneer, J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657750716493,"sku":"40447","price":722.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40177_1200_clean__02260_25742__68442.1707892225.1280.1280.jpg?v=1742535402"},{"product_id":"40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles","title":"TK40573 6 Bolt Front Hub Gasket for Dana 44 \u0026 Ford Dana 60 Front Axles","description":"\u003cp\u003e\u003cstrong\u003eTK40573 \u003cem\u003eTorque King\u003c\/em\u003e® 6 Bolt Front Hub Gasket for Dana 44 and Ford Dana 60 Front Axles\u003c\/strong\u003e is a brand new, precision cut, high-tech gasket made specifically for 1950's to 1977 Chevy, Dodge, Ford, GMC, Jeep Dana 44 and Ford Dana 60 Front Drive axles with external mount lockout hubs or drive flanges secured to the wheel hub with six 3\/8\" bolts. The bolt circle is 3.750\". USA Made. Sold individually.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003ePremium Material\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eInside Diameter\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSpicer Plastic Dial Hubs\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eGasket Use\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePremium Material\u003c\/strong\u003e\u003cbr\u003eThe original paper gasket for these front axle applications was made with vegetable fiber which gets brittle and shrinks with age. Our new gasket does not suffer from those problems, plus is much more durable, can take higher clamp pressures, and it is resistant to torque shear.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInside Diameter\u003c\/strong\u003e\u003cbr\u003eThe inside diameter of TK40573 Gasket is made to fit over the male hub pilot found on solid drive flanges and some lockout hubs such as the Warn M197 series. It will also work fine with unpiloted aftermarket lockout hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSpicer Plastic Dial Hubs\u003c\/strong\u003e\u003cbr\u003eIf you have the big factory Spicer Plastic Dial Hubs on your Ford or GM 4x4, use TK40573 between the Chrome Outer Cap (\u003ca href=\"\/products\/40546-qu40546uas-used-spicer-external-mount-lockout-hub-chrome-cap\" target=\"_blank\"\u003eQU40546UAS\u003c\/a\u003e) and Hub Body (\u003ca href=\"\/products\/40547-qu40547-spicer-splined-hub-body\" target=\"_blank\"\u003eQU40547\u003c\/a\u003e). Order \u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e Metal Gasket to place between the Hub Body (\u003ca href=\"\/products\/40547-qu40547-spicer-splined-hub-body\" target=\"_blank\"\u003eQU40547\u003c\/a\u003e) and Wheel Hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGasket Use\u003c\/strong\u003e\u003cbr\u003eSpicer external mount factory lock-out hubs were designed for use with gaskets of specific thicknesses. Do not use RTV or other sealants in lieu of gaskets!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e 6 Bolt Metal Hub Gasket for Chevy, Dodge, and GMC with External Mount Lockouts\u003cbr\u003e\u003ca href=\"\/products\/40596-qu40596-6-bolt-19-spline-front-hub-drive-flange\" target=\"_blank\"\u003eQU40596\u003c\/a\u003e 6 Bolt Steel Drive Flange \u003cbr\u003e\u003ca href=\"\/products\/50818-qu50818-warn-9072-external-manual-locking-hub-set\" target=\"_blank\"\u003eQU50818\u003c\/a\u003e Warn Lockout Hub Set\u003cbr\u003e\u003ca href=\"\/products\/40256-tk40256-red-torque-king-heavy-duty-replacement-hub-dial\" target=\"_blank\"\u003eTK40256\u003c\/a\u003e Red Hub Dial for Ford Spicer Factory Plastic Dial Hub\u003cbr\u003e\u003ca href=\"\/products\/30198-tk30198-gold-heavy-duty-aluminum-replacement-spicer-d44-hub-dial\" target=\"_blank\"\u003eTK30198\u003c\/a\u003e Yellow (Gold) Hub Dial for GM Spicer Factory Plastic Dial Hub\u003cbr\u003e\u003ca href=\"\/products\/20114-qu20114-spicer-hub-clutch-gear\" target=\"_blank\"\u003eQU20114\u003c\/a\u003e Hub Drive Gear Spicer for Factory Plastic Dial Hub\u003cbr\u003e\u003ca href=\"\/products\/40032-qu40032-axle-shaft-snap-ring-for-19-spline-dana-front-outer-axle-shafts\" target=\"_blank\"\u003eQU40032\u003c\/a\u003e Axle Shaft Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40547-qu40547-spicer-splined-hub-body\" target=\"_blank\"\u003eQU40547\u003c\/a\u003e Splined Hub Body for Spicer Factory Plastic Dial Hub\u003cbr\u003e\u003ca href=\"\/products\/9920109-qu20109-spicer-hub-axle-shaft-drive-gear-for-external-mount-hubs\" target=\"_blank\"\u003eQU20109\u003c\/a\u003e Axle Shaft Gear\u003cbr\u003e\u003ca href=\"\/products\/40471-tk40471-hub-dial-o-ring-spicer-plastic-hub-dials-in-ford-gm-3-4-tons\" target=\"_blank\"\u003eTK40471\u003c\/a\u003e Dial Sealing Ring for Spicer Factory Plastic Dial Hub\u003cbr\u003e\u003ca href=\"\/products\/20112-qu20112-hub-dial-snap-ring-for-spicer-external-mount-hub-locks\" target=\"_blank\"\u003eQU20112\u003c\/a\u003e Hub Dial Snap Ring for Spicer Factory Plastic Dial Hub\u003cbr\u003e\u003ca href=\"\/products\/9940406-qu40406-spicer-hub-cam-for-external-mount-front-hubs-on-ford-gm\" target=\"_blank\"\u003eQU40406\u003c\/a\u003e Hub Cam for Spicer Factory Plastic Dial Hub \u003cbr\u003e\u003ca href=\"\/products\/40257-qu40257-allen-head-hub-bolt\" target=\"_blank\"\u003eQU40257\u003c\/a\u003e Hub Bolt for Spicer Factory Plastic Dial Hub\u003cbr\u003e\u003ca href=\"\/products\/40231-qu40231-spicer-hub-sealing-lock-washer\" target=\"_blank\"\u003eQU40231\u003c\/a\u003e Sealing Washer for Spicer Factory Plastic Dial Hub\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC\u003c\/strong\u003e\u003cbr\u003e3\/4 ton 4x4 K20, K25 with Dana 44 Front Axle and 6 Bolt external mount type hubs: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e\u003cbr\u003eW-100 1\/2 ton Pickup with Dana 44 Front Axle and 6 Bolt external mount type hubs: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eW200 3\/4 ton Pickup with Dana 44 Front Axle and 6 Bolt external mount type hubs: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eF-250 with Dana 44HD Closed Knuckle Front Axle: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF-250 with Dana 44 Open Knuckle Front Axle and external mount type hubs: 1976, 1977.5\u003cbr\u003eF-250 Crew Cab with Dana 60 Front Axle: 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC\u003c\/strong\u003e\u003cbr\u003e1\/2 ton and 3\/4 ton with Dana 44 Closed Knuckle Front Axle and 6 Bolt external mount type hubs: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e\u003cbr\u003eJ-20 3\/4 ton Pickup with Dana 44 Open Knuckle Front Axle and 6 Bolt external mount type hubs: 1974, 1975, 1976, 1977.5\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657902792781,"sku":"40573","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk40573__67866_9101__93357.1707896963.1280.1280.jpg?v=1742541280"},{"product_id":"51050-qu51050-dana-44-basic-pinion-depth-shim-kit","title":"QU51050 Dana 44 Basic Pinion Depth Shim Kit","description":"\u003cp\u003e\u003cstrong\u003eQU51050 Basic Pinion Depth Shim Kit for Dana 44 Axles\u003c\/strong\u003e includes 5 total shims in 4 sizes that can be combined to equal the total pinion depth shim pack required for vintage Dana 44 and Spicer Model 44 axles that use pinion depth shims located between the inner pinion bearing cup and axle housing. QU51050 is a low-cost option for those who just need pinion depth shims for their Dana 44 axle. If you need a complete Dana 44 Pinion and Differential Shim Kit that includes Pinion Depth, Pinion Preload, and Differential Shims, see \u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311.\u003c\/a\u003e \u003cbr\u003eShim Sizes Included:\u003cbr\u003e(1) 0.10\"\u003cbr\u003e(2) 0.012\"\u003cbr\u003e(1) 0.015\"\u003cbr\u003e(1) 0.020\"\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657950830669,"sku":"51050","price":16.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu51050clean__13731_10296__90177.1707898231.1280.1280.jpg?v=1742542722"},{"product_id":"42178-tk42178-left-inner-axle-shaft-for-1974-1975-ihc-200-dana-44-front-axle","title":"TK42178 Left Inner Axle Shaft for 1974-1975 IHC 200 Dana 44 Front Axle","description":"\u003cp\u003e\u003cstrong\u003eTK42178 Torque King Chromoly Left Inner Axle Shaft for 1974-1975 IHC 200\u003c\/strong\u003e 3\/4 ton 4x4's with Dana 44 open knuckle front axles is a USA Made, thru-hardened direct-fit, high performance replacement 1-5\/16\" x 30 Spline Left Inner Axle Shaft for all 1974 and 1975 International 200 3\/4 ton 4x4 trucks with the Dana 44 open-knuckle 4x4 Solid Front Drive Axle. Made in USA from top quality American Chrome-Moly forgings. Build to Order 7-10 day lead time to ship.\u003c\/p\u003e \u003cp\u003eThis shaft is Built to Order therefore your order cannot be canceled once it is placed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eU-Joint Specs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003e1974-1975 IHC 200 Front Axles\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#cad\"\u003eCAD Drawing\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eU-Joint Specs \u003c\/strong\u003e\u003cbr\u003eTK42156 Right (Short Side) Inner Axle Shaft takes universal joints made to Spicer 1350WJ dimensional specifications. The cup diameter for these u-joints is 1-3\/16\". The 4 cups are grooved to accept Inside C-Clip Snap Rings. The installed Clips fit against the machined inner faces of the axle shaft yokes. The distance between the inside of the axle shaft yoke ears is be 2-3\/16\". For matching u-joints, see \u003ca href=\"\/products\/40712-tk40712-torque-king-non-greaseable-axle-shaft-universal-joint\" target=\"_blank\"\u003eTK40712\u003c\/a\u003e and \u003ca href=\"\/products\/90007-qu90007-greaseable-front-axle-u-joint-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU90007\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1974-1975 IHC 200 Front Axles\u003c\/strong\u003eFor the 1974 and 1975 model years, International made both 3\/4 ton and 1 ton 200 series 4x4 trucks. The 3\/4 ton models have a Dana 44 open knuckle, disc brake front axle. The 1 ton versions have Dana 70 closed knuckle, drum brake front axles. According to Spicer, there may have also been a small number of 1975 1 ton trucks with Dana 60 open knuckle disc brake axles, however IHC catalogs do not list a 60 front axle for these years.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eIHC:\u003cbr\u003e\u003c\/strong\u003e200 3\/4 ton: 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca name=\"cad\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eCAD Drawing:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eDrawing is a Large File that may take Longer to Load.\u003ca href=\"\/products\/42178-tk42178-left-inner-axle-shaft-for-1974-1975-ihc-200-dana-44-front-axle\"\u003eClick Here\u003c\/a\u003e to reload drawing\u003c\/strong\u003e\u003c\/p\u003e \u003cscript src=\"https:\/\/cas.zma.gs\/5c12d984dbec8331892fa503\/ssr\/experiences\/652974a62a22914a6a8100dd\/init.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41658553040973,"sku":"42178","price":465.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/TK42178__88674_26358__11311.1707901367.1280.1280.jpg?v=1742554187"},{"product_id":"134884-tk4884-dana-44-timken-differential-and-pinion-bearing-only-kit","title":"TK4884 Dana 44 Timken Differential and Pinion Bearing Only Kit","description":"\u003cp\u003e\u003cstrong\u003eTK4884 Dana 44 Timken Differential and Pinion Bearing Only Kit\u003c\/strong\u003e fits mid 1960s to early 1990s Dana 44 open and closed knuckle front axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s. Kit includes Timken Inner Pinion Bearing and Cup, Outer Pinion Bearing and Cup, and two Differential Side Bearings with Cups.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eTK4884 includes these components:\u003cbr\u003e1 \u003ca href=\"\/products\/50533-qu50533-timken-outer-pinion-bearing-cup\" target=\"_blank\"\u003eQU50533 \u003c\/a\u003eOuter Pinion Bearing Cup\u003cbr\u003e1 \u003ca href=\"\/products\/50534-qu50534-timken-outer-pinion-bearing\" target=\"_blank\"\u003eQU50534 \u003c\/a\u003eOuter Pinion Bearing\u003cbr\u003e1 \u003ca href=\"\/products\/50535-qu50535-dana-25-dana-44-inner-timken-pinion-bearing-cup\" target=\"_blank\"\u003eQU50535 \u003c\/a\u003eInner Pinion Bearing Cup\u003cbr\u003e1 \u003ca href=\"\/products\/50536-qu50536-dana-25-dana-44-inner-timken-pinion-bearing\" target=\"_blank\"\u003eQU50536 \u003c\/a\u003eInner Pinion Bearing\u003cbr\u003e2 \u003ca href=\"\/products\/50537-qu50537-timken-dana-44-differential-side-bearing-cup\" target=\"_blank\"\u003eQU50537 \u003c\/a\u003eDifferential Side Bearing Cup\u003cbr\u003e2 \u003ca href=\"\/products\/50538-qu50538-timken-large-bore-dana-44-or-dana-53-diff-side-bearing\" target=\"_blank\"\u003eQU50538 \u003c\/a\u003eDifferential Side Bearing\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eMid 1960's to early 1990's Dana 44 Open and Closed Knuckle Front Axles in Chevy, Dodge, Ford, GMC, IHC, Jeep 4x4's\u003c\/p\u003e","brand":"Timken","offers":[{"title":"Default Title","offer_id":41658570342477,"sku":"134884","price":217.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk4884__13750_9694__69120.1707901582.1280.1280.jpg?v=1742555041"},{"product_id":"440711-d440711-svl-gear-set","title":"D440711 Dana 44 5.89 Thick Ring and Pinion Gear Set","description":"\u003cp\u003e\u003cstrong\u003eD440711 5.89 Ratio Thick Dual Drilled Ring and Pinion Set\u003c\/strong\u003e with standard rotation for Dana 44 front or rear axles. The pinion shaft has 26 splines and the ring is drilled to fit either 3\/8\" \u003ca href=\"https:\/\/torqueking.com\/products\/40209-qu40209-dana-44-ring-gear-bolt\"\u003eQU40209\u003c\/a\u003e or 7\/16\" Ring Gear Bolts. These popular 5.89 ratio gear sets were used by Dodge, Ford, GM, International, and Jeep and it will fit many front\/rear axle applications from 1953 to 2018. Use D440711 Thick Ring and Pinion Set with a differential for FAST ratios.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eProduct Note\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eWill Not Fit\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eGear Ratio Change\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eRing Gear Bolts\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003ePinion Preload\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eKit Components\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"#note7\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003cbr\u003eD440711 Gear Set has 53 teeth on the ring gear and 9 teeth on the pinion gear. It is a matched, standard cut gear set that fits most Dana 44 axles that have the pinion gear located below the axle center line. The pinion shaft is the 26 spline configuration used on Dana 44 gear sets since the mid 1960s.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWill Not Fit\u003c\/strong\u003e\u003cbr\u003eD440711 will not fit Dana 44 series axles in 1966-1996 Ford F100, F150, Bronco or 1977.5-1996 F250. These Ford models have pinion gears mounted above the axle center line and require a reverse spiral gear set.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eGear Ratio Change\u003c\/strong\u003e\u003cbr\u003eIf you are doing a gear ratio change, you will also need to change your differential case (the part the ring gear bolts to) if your current ratio is 3.73 or faster. Faster gear ratios have a larger diameter pinion gear than slow ratios so they require a differential case with a different offset. For the Dana 44 axles that can use this gear set, the differential cases are different for 3.73 and numerically lower and 3.92 and numerically higher ratios.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRing Gear Bolts\u003c\/strong\u003e\u003cbr\u003eRing Gear Bolts are designed to be used once and only once.\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40209-qu40209-dana-44-ring-gear-bolt\"\u003eQU40209\u003c\/a\u003e 3\/8\" Dana 44 Ring Gear Bolt\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePinion Preload\u003c\/strong\u003e\u003cbr\u003ePinion preload is set using shims on 1993 and older Dana 44 axles.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSet Components\u003c\/strong\u003e\u003cbr\u003eSet Includes:\u003cbr\u003eReplacement 5.89 ratio, matched, standard cut thick dual drilled gear set\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eRelated items for D440711 gear set:\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Differential Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40209-qu40209-dana-44-ring-gear-bolt\"\u003eQU40209\u003c\/a\u003e 3\/8\" Dana 44 Ring Gear Bolt\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\"\u003eQU40009\u003c\/a\u003e OEM Dana Pinion Lock Nut for Dana 25, 27, 30, 44, 50, 53 Axles\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40010-qu40010-dana-axle-pinion-washer\"\u003eQU40010\u003c\/a\u003e Dana Axle Pinion Washer\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/5530170-qu30170u-used-3-92-up-dana-44-loaded-open-diff-case\" target=\"_blank\"\u003eQU30170U\u003c\/a\u003e Used Loaded Dana 44 Diff Case 3.92-up\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/40634-qu40634-dana-44-3-92-up-slow-ratio-empty-open-diff-case-kit\" target=\"_blank\"\u003eQU40634\u003c\/a\u003e New Empty Dana 44 Diff Case 3.92-up\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/40635-qu40635-dana-44-slow-ratio-loaded-open-differ-case-assembly-kit\" target=\"_blank\"\u003eQU40635\u003c\/a\u003e New Loaded Dana 44 Diff Case Assembly with Diff Bearings for 3.92-up\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/50537-qu50537-timken-dana-44-differential-side-bearing-cup\" target=\"_blank\"\u003eQU50537\u003c\/a\u003e Timken® Differential Side Bearing Cup\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/50538-qu50538-timken-large-bore-dana-44-or-dana-53-diff-side-bearing\" target=\"_blank\"\u003eQU50538\u003c\/a\u003e Timken® Differential Side Bearing\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/90009-qu90009-universal-axle-service-pack\" target=\"_blank\"\u003eQU90009\u003c\/a\u003e Axle Service Pack with Gear Marking Compound, Threadlocker, RTV Sealant, Brush\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032\u003c\/a\u003e Differential Housing Spreader\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044\u003c\/a\u003e Inner Pinion Bearing Installer\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812\u003c\/a\u003e Inner\/Outer Pinion Bearing Cup Installer\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/1115-qt1115-dana-44-differential-side-bearing-installer\" target=\"_blank\"\u003eQT1115\u003c\/a\u003e Differential Side Bearing Installer\u003cbr\u003e\u003ca rel=\"noopener\" href=\"\/products\/1035-qt1035-differential-press-step-plate\" target=\"_blank\"\u003eQT1035\u003c\/a\u003e Diff Press Plate\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC (Front Axle)\u003c\/strong\u003e: \u003cbr\u003eK10\/K15\/K1500, K20\/K25\/K2500 May require pinion yoke change to 26 spline): 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eK20\/K25\/K2500: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 \u003cbr\u003eK5 Blazer, Jimmy, K10\/K15: 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC (Rear Axle)\u003c\/strong\u003e: \u003cbr\u003eC10\/C1500 Suburban and truck with Dana 44 axle: 1967, 1968\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge (Front Axle):\u003c\/strong\u003e\u003cbr\u003eW100, W200 (May require pinion yoke change to 26 spline): 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eW100: 1967, 1968, 1969, 1970, 1971, 1972 \u003cbr\u003eW200, W250 with Dana 44 axle: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord (Front Axle):\u003c\/strong\u003e\u003cbr\u003eF100 (May require pinion yoke change to 26 spline): 1959, 1960, 1961, 1962, 1963, 1964, 1965 \u003cbr\u003eF250 (May require pinion yoke change to 26 spline): 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eF250 Regular Cab: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1977.5 \u003cbr\u003eBronco: 1971, 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Front Axle):\u003c\/strong\u003e\u003cbr\u003e1\/2 ton and 3\/4 ton (May require pinion yoke change to 26 spline): 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 \u003cbr\u003e1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 1100, 1200\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Rear Axle):\u003c\/strong\u003e\u003cbr\u003e1100: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Front Axle):\u003c\/strong\u003e\u003cbr\u003eJ-Series truck (May require pinion yoke change to 26 spline): 1962, 1963, 1964, 1965, 1966 \u003cbr\u003eJ-Series Truck: 1967, 1968, 1969, 1970, 1971, 1972, 1973 \u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Rear Axle):\u003c\/strong\u003e\u003cbr\u003eWagoneer: 1967, 1968, 1969, 1970, 1971 \u003cbr\u003e1\/2 ton truck: 1971, 1972, 1973 \u003cbr\u003eCJ5, CJ6: 1972, 1973, 1974, 1975 \u003cbr\u003eCherokee, Wagoneer, J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41658595541069,"sku":"440711","price":290.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/440711.png?v=1776449138"},{"product_id":"50818-qu50818-warn-9072-external-manual-locking-hub-set","title":"QU50818 Warn 9072 External Manual Locking Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQU50818 Warn 9072 Premium, all metal, 6 Bolt, External Mount Free-Wheel Manual Locking Hub Set\u003c\/strong\u003e with ZA alloy dial fits many 1956-1977 1\/2 ton and 3\/4 ton 4x4s with Dana 44 or Dana 44HD front axles. Warn 9072 Hub Set includes 2 M197 Hubs, 12 mounting bolts, 12 lockwashers, 12 flat washers, 12 dial screws, 2 hub dial gaskets, and instructions. Each Hub also features an o-ring to seal between the hub body and your wheel hub. The WARN 9072\/M197 Premium Hub is a no-compromise hub designed for the hardcore off-roader or truck owner who will accept nothing less than the industry standard in performance. 6 Bolt x 3.75\" Bolt Circle. Mates with 1-1\/4\"-19 spline axle shafts. Fits Chevy (1960-1977), Dodge (1957-1975), Ford (1959-1977), GMC (1960-1977), IHC (1956-1972), and Jeep (1974-1977) 3\/4 ton 4x4 front axles with external mount type wheel hubs. Also fits 1957-1968 Dodge W-100 4x4.\u003c\/p\u003e \u003cp\u003eThe heavy-duty dial with dual seals requires a full 9\/10ths of a turn to ensure positive engagement of the inner drive gear to the clutch ring. To make sure they stay engaged, WARN premium hubs use a thick internal wave spring and heavy dial detents. WARN 9072 hubs are covered by a lifetime limited warranty. p\/n QU50818. USA made with domestic and import parts.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eProduct Specs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eThreadlocker\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eWear\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eO-Rings, No Gaskets\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Specs\u003c\/strong\u003e\u003cbr\u003eQU50818 Bolt Circle is 3-3\/4\". Your matching 1-1\/4\" diameter axle shafts will 19 splines. The bolt thread is 3\/8\" coarse.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThreadlocker\u003c\/strong\u003e\u003cbr\u003eApply Blue Threadlocker to the bolt threads for maximum retention.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWear\u003c\/strong\u003e\u003cbr\u003eIt is pretty common to find the bolt holes in a wheel hub are worn from loose bolts. It is also pretty common to have one or more rusted in bolts broken off flush with the wheel hub face. On most of these vintage wheel hubs, you can have a machine shop drill and tap 6 new bolt holes between the original holes. Bolting your new hub set to a wheel hub with damaged holes will just about guarantee you will have problems.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eO-Rings, No Gaskets\u003c\/strong\u003e\u003cbr\u003eQU50818 Hubs use factory installed o-rings instead of gaskets to seal between the lockout hub body and your wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC \u003cbr\u003e\u003c\/strong\u003eK20, K25, K2500: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, early 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e \u003cbr\u003eW-100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003eW-200 with Dana 44 Axle: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e \u003cbr\u003eF-250 with Dana 44HD: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF-250 Crew Cab with Dana 60: 1974, 1975\u003cbr\u003eF250 with Dana 44 Open Knuckle Front Axle: 1976, 1977.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational\u003c\/strong\u003e \u003cbr\u003e3\/4 ton 120, 1200, 200 with 6 bolt external mount hub: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e \u003cbr\u003eJ20 Pickup: 1974, 1975, 1976, early 1977\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41658626146381,"sku":"50818","price":430.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu50818__31579_10502__72017.1707902055.1280.1280.jpg?v=1742557168"},{"product_id":"441975-d441975-drive-gear","title":"D441975 Ring Gear Bolt, Pinion Nut, Pinion Washer Set, D30, D44","description":"\u003cp\u003e\u003cstrong\u003eD441975 Ring Gear Bolt, Pinion Nut, and Pinion Washer Set\u003c\/strong\u003e is an exact fit, Grade 9, genuine Dana-Spicer replacement part for most Dana 44 axles from the mid-1970's on. It also fits most Dana 30 and some Dana 35 axles. The ring gear bolts, have a serrated inner face resists loosening better than smooth-faced, aftermarket or first design Dana original equipment bolts. The bolts have locking teeth under the hex head to prevent loosening under any load conditions. \u003ca href=\"https:\/\/torqueking.com\/products\/40209-qu40209-dana-44-ring-gear-bolt\"\u003eQU40209\u003c\/a\u003e also works great for retrofitting older axles in place of the original bolt as long as you use torque spec given below. USA Made. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e10 \u003ca href=\"https:\/\/torqueking.com\/products\/40209-qu40209-dana-44-ring-gear-bolt\"\u003eQU40209\u003c\/a\u003e Ring Gear Bolts\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\"\u003eQU40009\u003c\/a\u003e Pinion Nut\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/40010-qu40010-dana-axle-pinion-washer\"\u003eQU40010\u003c\/a\u003e Pinion Washer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDan The Gear Man® \u003cspan style=\"color: rgb(255, 42, 0);\"\u003eSafety Note\u003c\/span\u003e:\u003c\/strong\u003e Ring Gear Bolts and Pinion Lock Nuts are designed for a single use. They \u003cem\u003emust\u003c\/em\u003e be replaced after they are removed!!!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eSingle Use Only\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003eFactory Torque\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eThreadlocker\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSingle Use Only\u003c\/strong\u003e\u003cbr\u003eFor your safety, always replace Ring Gear Bolts!! They are designed for a single use. They \u003cem\u003emust\u003c\/em\u003e be replaced after they are removed!!! \u003cbr\u003eThese lock nuts are designed to be used only once. The locking ability of the nut is at its maximum on the initial installation. When setting up an axle, I use the old nut until the pinion depth and pinion preload is set. I then apply medium strength Threadlocker (see \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e, \u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003eS24200\u003c\/a\u003e) to a new nut and install it with a 1-1\/8\" socket. See my color illustrated Technical Manual \u003cem\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service on Dana-Spicer Monobeam Axles\u003c\/em\u003e or your Factory Shop Manual for the correct torque or tightening procedure.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFactory Torque\u003c\/strong\u003e\u003cbr\u003eThe factory recommended torque for \u003ca href=\"https:\/\/torqueking.com\/products\/40209-qu40209-dana-44-ring-gear-bolt\"\u003eQU40209\u003c\/a\u003e Bolt is 80-85 lb.-ft. (108-115 N-m). Tighten Bolts in a Crisscross pattern.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThreadlocker\u003c\/strong\u003e\u003cbr\u003eApply \u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\"\u003e242\u003c\/a\u003e Blue Threadlocker to the Bolt threads before installation.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/sku-xv1085-1976-1977-ford-f100-f150-dana-44-front-axle-exploded-view\"\u003eExploded View XV1085\u003c\/a\u003e 1976-1977 Ford F-100\/F150 Dana 44 Front Axles\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/sku-xv1084-1978-1979-ford-bronco-f150-regular-cab-dana-44-front-axle-exploded-view\"\u003eExploded View XV1084\u003c\/a\u003e 1978-1979 Ford Bronco, F150 Regular Cap Dana 44 Front Axles\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle\" target=\"_blank\"\u003eQU40448\u003c\/a\u003e Inner Pinion Cup Oil Baffle\u003cbr\u003e\u003ca href=\"\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger\" target=\"_blank\"\u003eQU40028\u003c\/a\u003e Inner Pinion Bearing Slinger\u003cbr\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003eQU40214\u003c\/a\u003e Dana 44 Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/42028-qu42028-dana-44-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42028\u003c\/a\u003e Reusable Dana 44 Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/82194-s82194-3-5oz-ultra-gray-rtv\" target=\"_blank\"\u003eS82194\u003c\/a\u003e RTV Sealant\u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311\u003c\/a\u003e Dana 44 Differential \u0026amp; Pinion Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Dana 44 Pinion Seal for 1950's-1990's axles using shims for pinion bearing preload\u003cbr\u003eFront Inner Axle Seals will vary by year\/model, see our axle specific main page\u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044\u003c\/a\u003e Inner Pinion Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812\u003c\/a\u003e Outer Pinion Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1818-qt1818-taper-bearing-cup-installer\" target=\"_blank\"\u003eQT1818\u003c\/a\u003e Inner Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032\u003c\/a\u003e Differential Case Spreader\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC Front Axle:\u003c\/strong\u003e\u003cbr\u003eDana 44 Closed Knuckle: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eDana 44HD Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eDana 44 Open Knuckle: 1969, 1970, 1971, 1972\u003cbr\u003eDana 44 Open Knuckle: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge Front Axle:\u003c\/strong\u003e\u003cbr\u003eDana 44 Closed Knuckle: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eDana 44HD Closed Knuckle: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eDana 44 Open Knuckle: 1972, 1973, 1974, 1975\u003cbr\u003eDana 44 Live Spindle: 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eDana 44 Open Knuckle: 1980, 1981, 1982, 1983, 1984\u003cbr\u003eDana 44 Open Knuckle and Central Axle Disconnect: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eRam 1500 Dana 44: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003eRam 2500 Dana 44: 1994, 1995, 1996, 1997\u003cbr\u003eW150 with Dana 44 1978\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord Front Axle:\u003c\/strong\u003e\u003cbr\u003eDana 44 Closed Knuckle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eDana 44HD Closed Knuckle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eBronco, F-100, F-150 Dana 44 Open Knuckle: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF-250 Dana 44 Open Knuckle: 1976, 1977, 1978, 1979\u003cbr\u003eDana 35IFS: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC Front Axle:\u003c\/strong\u003e\u003cbr\u003eDana 44 Closed Knuckle: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eDana 44HD Closed Knuckle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eDana 44 Open Knuckle: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC Rear Axle:\u003cbr\u003e\u003c\/strong\u003eDana 44: 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep Front Axle:\u003c\/strong\u003e\u003cbr\u003eDana 44 Closed Knuckle: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eDana 44 Open Knuckle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eJK Series Dana Super 30: 2007-Up\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep Rear Axle:\u003c\/strong\u003e\u003cbr\u003eCJ Dana 44: 1972, 1973, 1974, 1975, and 1986\u003cbr\u003eJ-Series Dana 44: 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eSUV Dana 44: 1986-Up\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41658648690765,"sku":"441975","price":24.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/D441975-1.png?v=1775109131"},{"product_id":"440018-d440018-new-dana-44-fast-ratio-empty-open-differential-case","title":"D440018 New Dana 44 Fast Ratio Empty Open Differential Case","description":"\u003cp\u003e\u003cstrong\u003eD440018 New Dana 44 Fast Ratio Empty Open Differential Case\u003c\/strong\u003e is a genuine Dana OEM differential case for Dana 44 front and rear axles with 2.73 to 3.73 gear ratios and 30 spline axle shafts. These popular diffs were used by Dodge, Ford, GM, International, and Jeep and they will fit many front\/rear axle applications from 1967 to 1993. USA Made.\u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/40632-qu40632-dana-44-3-73-faster-ratio-empty-open-differential-case-kit\" target=\"_blank\"\u003eQU40632\u003c\/a\u003e New Dana 44 Empty Diff\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSide Gears\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eIncludes\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eFits\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eRing Gear Bolts\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eDiff Tech Page\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSide Gears\u003c\/strong\u003e\u003cbr\u003eD440018 Differential uses 30 spline side gears.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003eD440018 is a BARE Differential Case only\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eD440018 Differentials fit most 1967-1993 Dana 44 axles with 2.73 to 3.73 ratio gear sets. If you need a differential for 3.92 to 5.89 ratio gear sets, see \u003ca href=\"\/products\/40635-qu40635-dana-44-slow-ratio-loaded-open-differ-case-assembly-kit\" target=\"_blank\"\u003eQU40635\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRing Gear Bolts\u003c\/strong\u003e\u003cbr\u003eRing Gear Bolts, \u003ca href=\"\/products\/40209-qu40209-dana-44-ring-gear-bolt\" target=\"_blank\"\u003eQU40209\u003c\/a\u003e, are designed to be used once and only once.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDiff Tech Page\u003c\/strong\u003e\u003cbr\u003eFor more information about differences between early and late production Dana 44 differential cases including spline and bearing changes, see my \u003ca href=\"\/pages\/dana-44-differential-tech-1953-1993\" target=\"_blank\"\u003e1953-1993 Dana 44 Diff Tech\u003c\/a\u003e Page.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eRelated items for QU40633 Dana 44 Diff: \u003cbr\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003eQU40214 \u003c\/a\u003eDana 44 Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/40209-qu40209-dana-44-ring-gear-bolt\" target=\"_blank\"\u003eQU40209 \u003c\/a\u003eRing Gear Bolts\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Differential Bearing and Seal Kit for 1993 and older axles \u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal to 1993 \u003cbr\u003e\u003ca href=\"\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger\" target=\"_blank\"\u003eQU40028\u003c\/a\u003e Inner Pinion Bearing Slinger \u003cbr\u003e\u003ca href=\"\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle\" target=\"_blank\"\u003eQU40448\u003c\/a\u003e Inner Pinion Oil Baffle \u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger \u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311\u003c\/a\u003e Diff and Pinion Shim Kit \u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Lock Nut \u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Yoke Washer \u003cbr\u003e\u003ca href=\"\/products\/90009-qu90009-universal-axle-service-pack\" target=\"_blank\"\u003eQU90009\u003c\/a\u003e Axle Service Pack with Gear Marking Compound, Threadlocker, RTV Sealant, Brush \u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032\u003c\/a\u003e Differential Housing Spreader \u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044\u003c\/a\u003e Inner Pinion Bearing Installer \u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812\u003c\/a\u003e Pinion Bearing Cup Installer \u003cbr\u003e\u003ca href=\"\/products\/1115-qt1115-dana-44-differential-side-bearing-installer\" target=\"_blank\"\u003eQT1115\u003c\/a\u003e Differential Side Bearing Installer \u003cbr\u003e\u003ca href=\"\/products\/1035-qt1035-differential-press-step-plate\" target=\"_blank\"\u003eQT1035\u003c\/a\u003e Diff Press Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC (Front Axle):\u003c\/strong\u003e \u003cbr\u003eK20\/K25\/K2500: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK5 Blazer, Jimmy, K10\/K15: 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge (Front Axle):\u003c\/strong\u003e \u003cbr\u003eW100: 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eW200, W250 with Dana 44 axle: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord (Front Axle):\u003c\/strong\u003e \u003cbr\u003eF250 Regular Cab: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977.5\u003cbr\u003eBronco: 1971, 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC (Front Axle):\u003c\/strong\u003e \u003cbr\u003e1100, 1200: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC (Rear Axle):\u003c\/strong\u003e \u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep (Front Axle):\u003c\/strong\u003e \u003cbr\u003eJ-Series Truck: 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep (Rear Axle):\u003c\/strong\u003e \u003cbr\u003eCJ5, CJ6: 1972, 1973, 1974, 1975\u003cbr\u003eCherokee, Wagoneer, J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41658654326861,"sku":"440018","price":0.0,"currency_code":"USD","in_stock":false}]},{"product_id":"440039-d440039-ring-adjusting","title":"D440039 RING ADJUSTING","description":"\u003cp\u003e\u003cstrong\u003eD440039 Adjusting Ring\u003c\/strong\u003e\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41658658783309,"sku":"440039","price":49.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/d440039_1594_1600__33260_21027__98237.1707902966.1280.1280.png?v=1742560007"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/1971-1975-ihc-dana-44-front-cover-500__53189_a375e625-0036-44ea-b341-236419d7c991.jpg?v=1774366022","url":"https:\/\/torqueking.com\/collections\/1971-1975-ihc-series-dana-44-open-front-axle.oembed?page=5","provider":"Torque King 4x4","version":"1.0","type":"link"}