{"title":"1962-1973 Jeep Truck Dana 44 Closed Front Axles","description":"\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" style=\"float: right;\" title=\"1957-1973-jeep-dana-44-front-cover-500.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/1957-1973-jeep-dana-44-front-cover-500.jpg?v=1742431336\" alt=\"1957-1973-jeep-dana-44-front-cover-500.jpg\" width=\"200\" height=\"167\"\u003eShop now for Parts, Tools, and Manuals to fit 1962-1973 Jeep J-Series 4x4 Trucks with Dana 44 Closed Knuckle Front Axles. Great selection. In stock. Quick shipping.\u003c\/p\u003e\n\u003cp\u003eJeep first used the Dana 44 Closed Knuckle Beam Type Front Axle in the 1957 cab over engine Forward Control (FC) series of 4x4 trucks. The Dana 44 will be found in FC150 trucks with the 57\" wide track option which was basically a 1\/2 ton short bed truck. Also using the Dana 44 axle was the long wheel base FC-170 3\/4 ton to 1 ton truck which was available with either single or dual rear wheels. Jeep built FC series trucks through the 1965 model year. The 1962-1973 Jeep Gladiator line of trucks would also use the Solid Beam Dana 44 closed knuckle axle as the stock axle. A Dana 44IFS axle was available as on option for 1963 to 1965 model years. The Gladiator line was built in 1\/2 ton and 3\/4 ton single rear wheel versions, plus a dual rear wheel 1 ton truck.\u003c\/p\u003e","products":[{"product_id":"1024-qt1024-4x4-triple-metric-and-standard-thread-spindle-puller-usa-made","title":"QT1024 4x4 Triple Metric and Standard Thread Spindle Puller, USA Made","description":"\u003cp\u003e\u003cstrong\u003eQT1024 4x4 Triple Metric and Standard Thread Spindle Puller\u003c\/strong\u003e fits any 5\/8\" Slide Hammer to quickly and easily remove those rusted in front wheel bearing spindles on your 4x4 without damage! Essential for servicing axle u-joints, ball joints, spindle bearings, inner axle seals, and differentials on any domestic 4x4 with serviceable wheel bearings. The business end of this tool is threaded with 3 different thread sizes so you can pull easily spindles on most Ford 4x4s and full size Chevy, Dodge, GMC, IHC, and Jeep 4x4 vehicles. The 38mm metric thread fits Ford Ranger and Bronco II, the midsize 1-5\/8\" thread fits almost all Dana 35 and Dana 44 front axles plus GM 10 bolt front axles. Use the large 2\" thread to pull spindles on the big boys with Dana 50IFS, Dana 60, and Dana 61 front axles. USA Made.\u003c\/p\u003e\n\u003cp\u003eAlso See: \u003ca href=\"\/products\/881024-qt1024i-4x4-triple-metric-and-standard-thread-spindle-puller-imported\" target=\"_blank\"\u003eQT1024i\u003c\/a\u003e 4x4 Triple Metric and Standard Thread Spindle Puller, Imported.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eRusted Spindles Removing rusted in 4x4 Front Sp\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRusted Spindles \u003c\/strong\u003e\u003cbr\u003eRemoving rusted in 4x4 Front Spindles can be a bear, but I have never had one I could not pull with one of our spindle pullers and either \u003ca href=\"\/products\/9302-qt9302-5-pound-slide-hammer\" target=\"_blank\"\u003e\u003cspan\u003eQT9302\u003c\/span\u003e \u003c\/a\u003e5 lb. or \u003ca href=\"\/products\/9303-qt9303-10-pound-slide-hammer\" target=\"_blank\"\u003e\u003cspan\u003eQT9303\u003c\/span\u003e \u003c\/a\u003e10 lb. slide hammer. I have seen a lot of spindles with mashed threads or egg shaped bearing surfaces that were ruined by folks who had a big hammer, but not much common sense.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFits Ford Ranger and Bronco II with metric 38mm x 1.5 pitch spindle threads. 1 5\/8\" for SUV's, 1\/2 ton and most 3\/4 trucks plus 1974, 1975, 1976, 1977 Ford Dana 60, and 2\" for heavy 3\/4 and 1 ton trucks.\u003c\/p\u003e\n\u003cp\u003eApplications include: \u003cbr\u003e\u003cbr\u003eChevy Blazer, GMC Jimmy and GM 1\/2 to 1 ton models 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e\u003cbr\u003eDodge Ram Charger and W100-350 trucks 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cbr\u003eFord Bronco and F-100-F350 trucks 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003e\u003cbr\u003eIHC 1\/2 to 1 ton trucks to 1975 except 1974-1975 100 and 150. 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e\n\u003cp\u003eJeep J-Series J10, J20, Wagoneer, Cherokee, Cherokee Chief: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 \u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655848927309,"sku":"1024","price":160.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT1024_A1-clean-1200-webp-mf__57745.1712352882.1280.1280.jpg?v=1742469579"},{"product_id":"1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made","title":"QT1032 Differential Case Spreader for Dana 25 to Dana 80 Axles USA Made","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1032 USA Made Dana 25-Dana 80 Differential Case Spreader \u003c\/strong\u003efor Dana-Spicer Axles Dana Axles are designed to have a differential bearing preload of .010\"-.015\". With our Case Spreader, removing and installing front and rear differentials on your 4x4 is much easier and will help prevent damage to those expensive differential components. Simply insert the attachment pins into the holes in your differential casting, mount a dial indicator to measure the amount of spread, and turn the adjuster with a wrench to spread your housing up to .020\" depending upon model. This Case Spreader will work on Dana 25, Dana 27, Dana 30, Dana 35, Dana 44, Dana 44HD, Dana 50, Dana 60, Dana 61, Dana 70, Dana 70HD, and Dana 80 front or rear beam axles. Also works on 8.8 Ford and GM 10-12 Bolt Differentials. This Spreader was designed before the advent of the Model 80 axle, so when used on the 80, some bar deflection may occur at the maximum spread. Made in Montana, U.S.A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv2011-dana-80-rear-axle-exploded-view-2000-2002-dodge-ram-2500-ram-3500\" target=\"_blank\"\u003eXV2011 2000-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axle\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eNecessary?\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eMatching Parts-Dana 70HD Rear Axles\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eMatching Parts-Dodge Dana 80 Rear Axles\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eMatching Parts-Ford Dana 80 Rear Axles \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts-Chevy \u0026amp; GMC Dana 80 Rear Axles\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNecessary?\u003c\/strong\u003e\u003cbr\u003eIs a Case Spreader really necessary? Considering that at least 95% of Dana differentials are removed and installed without a Case Spreader the answer must be no. But, if we change your question to: \"Is a Case Spreader really necessary to prevent damage to my parts or myself?\" Then the answer is an unqualified yes. Using a Spreader to relieve the differential bearing preload means it will be much easier to get the diff in and out and there is much less chance of injuring yourself or wrecking parts by using the what we call \"cowboy\" methods. Axles, differentials, and case spreaders are all really heavy if they fall on any portion of your body. Use care and common sense, if you don't know how to safely work on your vehicle, find someone who does!\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Matching Parts-Dana 70HD Rear Axles\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402\u003c\/a\u003e Timken Differential Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Axle Shaft Flange Gasket, most Dodge and Ford\u003cbr\u003e\u003ca href=\"\/products\/30010-qu30010-rear-axle-shaft-flange-gasket-1947-1991-gm-rear-axles\" target=\"_blank\"\u003eQU30010\u003c\/a\u003e Axle Shaft Flange Gasket, Chevy and GMC\u003cbr\u003e\u003ca href=\"\/products\/40577-qu40577-7-16-id-tapered-lock-wedge-or-cone-for-dana-rear-axles\" target=\"_blank\"\u003eQU40577\u003c\/a\u003e Locking Bushing Cone for Vintage Rear Axle Shafts\u003cbr\u003e\u003ca href=\"\/products\/90008-qu90008-gear-marking-compound\" target=\"_blank\"\u003eQU90008\u003c\/a\u003e Gear Marking Compound\u003cbr\u003e\u003ca href=\"\/products\/40367-qu40367-dana-60-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU40367\u003c\/a\u003e Dana 70 Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/42030-qu42030-reusable-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU42030\u003c\/a\u003e Reusable Dana 70 Differential Gasket\u003cbr\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service Manual for Dana Monobeam Axles\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403\u003c\/a\u003e Timken Taper Bearing\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Matchiing Parts-Dodge Dana 80 Rear Axles\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402\u003c\/a\u003e Timken Differential Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/134889-tk4889-dana-80-differential-and-pinion-bearing-only-kit\" target=\"_blank\"\u003eTK4889\u003c\/a\u003e Premium Differential Bearing Kit only 1994-2002\u003cbr\u003e\u003ca href=\"\/products\/4659-tk4659-94-99-dodge-dana-80-diff-bearing-seal-overhaul-kit-with-shims\" target=\"_blank\"\u003eTK4659\u003c\/a\u003e Premium Master Differential Bearing and Seal Kit 1994-1999\u003cbr\u003e\u003ca href=\"\/products\/4778-tk4778-premium-dana-80-rear-diff-overhaul-kit-for-2000-2002-dodge-ram\" target=\"_blank\"\u003eTK4778\u003c\/a\u003e Premium Master Differential Bearing and Seal Kit 2000-2002\u003cbr\u003e\u003ca href=\"\/products\/50437-qu50437-standard-differential-bearing-and-seal-kit-dana-80-rear-axles\" target=\"_blank\"\u003eQU50437\u003c\/a\u003e Standard Differential Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/40213-qu40213-dana-80-differential-shim-kit-for-dodge-and-ford-rear-axles\" target=\"_blank\"\u003eQU40213\u003c\/a\u003e Dana 80 Differential Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/6640260-tk40260-dana-80-outboard-differential-bearing-spacer-set\" target=\"_blank\"\u003eTK40260\u003c\/a\u003e Outboard Differential Bearing Spacer Set\u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Axle Shaft Flange Gasket, most Dodge\u003cbr\u003e\u003ca href=\"\/products\/40491-qu40491-dana-80-bare-fast-ratio-open-differential-case\" target=\"_blank\"\u003eQU40491\u003c\/a\u003e Bare Differential Case for 3.54 Ratio\u003cbr\u003e\u003ca href=\"\/products\/40490-qu40490-dana-80-bare-slow-ratio-open-differential-case\" target=\"_blank\"\u003eQU40490\u003c\/a\u003e Bare Differential Case for 4.10 Ratio\u003cbr\u003e\u003ca href=\"\/products\/42031-qu42031-dana-80-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42031\u003c\/a\u003e Reusable Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service Manual for Dana Monobeam Axles\u003cbr\u003e\u003ca href=\"\/products\/90008-qu90008-gear-marking-compound\" target=\"_blank\"\u003eQU90008\u003c\/a\u003e Gear Marking Compound\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403\u003c\/a\u003e Timken Taper Bearing\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts-Ford Dana 80 Rear Axles\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402\u003c\/a\u003e Timken Differential Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50437-qu50437-standard-differential-bearing-and-seal-kit-dana-80-rear-axles\" target=\"_blank\"\u003eQU50437\u003c\/a\u003e Differential Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/40213-qu40213-dana-80-differential-shim-kit-for-dodge-and-ford-rear-axles\" target=\"_blank\"\u003eQU40213\u003c\/a\u003e Dana 80 Differential Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Axle Shaft Flange Gasket for E350 and E450 Vans\u003cbr\u003e\u003ca href=\"\/products\/40241-qu40241-steel-hub-gasket\" target=\"_blank\"\u003eQU40241\u003c\/a\u003e Axle Shaft Flange Gasket for 1988-1991 F350 and 1995-1998 F450 \u003cbr\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service Manual for Dana Monobeam Axles\u003cbr\u003e\u003ca href=\"\/products\/90008-qu90008-gear-marking-compound\" target=\"_blank\"\u003eQU90008\u003c\/a\u003e Gear Marking Compound\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403\u003c\/a\u003e Timken Taper Bearing\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eMatching Parts-Chevy \u0026amp; GMC Dana 80 Rear Axles\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402\u003c\/a\u003e Timken Differential Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50437-qu50437-standard-differential-bearing-and-seal-kit-dana-80-rear-axles\" target=\"_blank\"\u003eQU50437\u003c\/a\u003e Differential Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/40213-qu40213-dana-80-differential-shim-kit-for-dodge-and-ford-rear-axles\" target=\"_blank\"\u003eQU40213\u003c\/a\u003e Dana 80 Differential Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service Manual for Dana Monobeam Axles\u003cbr\u003e\u003ca href=\"\/products\/90008-qu90008-gear-marking-compound\" target=\"_blank\"\u003eQU90008\u003c\/a\u003e Gear Marking Compound\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403\u003c\/a\u003e Timken Taper Bearing\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eWorks on the following Dana-Spicer Solid Beam Axle Models:\u003cbr\u003eModel 25, Model 27, Model 30, Model 35, Model 44, Model 50, Model 60, Model 61, Model 70, Model 70HD, Model 80\u003c\/p\u003e\n\u003cp\u003eCorporate Axles:\u003cbr\u003e8.8 Ford\u003cbr\u003e10-12 Bolt GM\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655854039117,"sku":"1032","price":304.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1032_2_1200_clean__67005_13812__50856.1707817298.1280.1280.jpg?v=1742469699"},{"product_id":"1035-qt1035-differential-press-step-plate","title":"QT1035 Differential Press Step Plate","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQT1035 Differential Press Step Plate\u003c\/strong\u003e for Dana 44, Dana 50, and Late Ford 9\" axles. QT1035 is used when pulling and\/or installing your differential bearings. These plates fit in the axle shaft hole of your differential. Use as a push plate for bearing removal or to support the differential when pressing on new bearings. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eRemoving Diff Bearings\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eInstalling Diff Bearings\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRemoving Diff Bearings\u003c\/strong\u003e\u003cbr\u003eWhen removing your differential bearings, use this plate between your differential case and press screw or press ram. The tip of your press screw fits in the pilot hole drilled in the plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstalling Diff Bearings\u003c\/strong\u003e\u003cbr\u003eFor installing your diff bearings, place QT1035 Step Plate on your work bench top or press bed. Place your differential on the Step Plate, then press on the first bearing. Flip the diff over and press on the second bearing. Using the Step Plate protects the differential, but the most important function is to keep the outer cage of the first bearing you installed from being crushed against your workbench or press bed as you install the second bearing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eUnder Construction\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655856005197,"sku":"1035","price":23.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1035__50090_7506__23773.1707817348.1280.1280.jpg?v=1742469745"},{"product_id":"1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles","title":"QT1041 Inner Axle Shaft Seal Installer with Depth Stop for Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"mimlogo.png\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.png\" title=\"mimlogo.png\" width=\"50\"\u003e\u003cbr\u003eQT1041 Inner Front Axle Shaft Oil Seal Installer for Dana 44 Front Axles \u003c\/strong\u003e installs the \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e current design original equipment CR made seal in many older 4x4 trucks with Dana-Spicer Model 44 axles. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time. Our custom, CNC Precision Machined, solid steel Seal Installer support these difficult to install seals in 3 locations so the seal cannot cock or get crushed during installation. (Also see \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e). Included in \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Kit and \u003ca href=\"\/products\/4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set\" target=\"_blank\"\u003eTS4871\u003c\/a\u003e Tool Set. Made in U.S.A. by Us Here in Montana.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*Important Note: Our custom Tool is made specifically for the \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e current design original equipment CR made seal. It most likely will NOT fit other make seals! We make our Tool EXACT so it will fit the seal and install super easy \u0026amp; perfectly in the axle housing. We like a professional installation in super quick time with no 'do overs'.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003ePrep\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003eBenefit of Custom Tool\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eFixed Depth Installer\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePrep:\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace the axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBenefit of Custom Tool:\u003c\/strong\u003e\u003cbr\u003eInstalling Dana 44 Inner Axle Shaft Oil Seals without damaging the seal, your axle housing, or your fingers can be difficult UNLESS you have the correct tools for the job. Combine this seal installer with our \u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Press Screw Assembly and \u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Thrust Plate, and you will quickly and easily install those pesky oil seals without mashing your fingers or cussing a blue streak! Plus the Seal will be installed right the first time, with no warranty comebacks!!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFixed Depth Installer:\u003c\/strong\u003e\u003cbr\u003eWe make two types of Seal Installers: Adjustable Depth and Fixed Depth. The QT1041 Installer on this page is a Fixed Depth Installer that will firmly stop at a preset depth (no measuring involved). Choose this Fixed Depth Installer if you want quick, fool-proof seal installation. Choose our \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Adjustable Depth Seal Installer if you want the flexibility to offset the seals to miss grooves worn in your axle shafts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seal\u003cbr\u003e\u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Inner Axle Seal Kit (includes 2 Seals, 1 for each side)\u003cbr\u003e\u003ca href=\"\/products\/4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set\" target=\"_blank\"\u003eTS4871\u003c\/a\u003e Inner Axle Seal Tool Set (no seals)\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications with Dana 44 Front Axle:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972.5, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250: 1967, 1968, 1969\u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC: \u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971.5, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655860854861,"sku":"1041","price":72.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1041_1200_clean__29660_12042__53623.1707817440.1280.1280.jpg?v=1742469822"},{"product_id":"1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings","title":"QT1044 Inner Pinion Bearing Installer for 1-5\/16\"-1-3\/8\" ID Bearings","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1044 1-5\/16\"-1-3\/8\" Inner Pinion Bearing Installer\u003c\/strong\u003e for Ford 9\"rear axle, Dana 25, Dana 27, Dana 30, Dana 44, Dana 44IFS, Dana 50, and Dana 50IFS front\/rear drive axles or other applications that require installing bearings with 1-5\/16\" to 1-3\/8\" inside diameters on long shafts. Made of steel construction with Black Oxide finish. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUsing\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUsing\u003c\/strong\u003e\u003cbr\u003eWith this tool, you can easily drive on or press on your inner pinion bearing. Using a press is preferred, but regardless of the installation method, be sure to place a piece of stiff cardboard between the pinion and table. Doing so will protect the pinion teeth from getting chipped or damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e Dana 25, Dana 27, Dana 30, Dana 44, Dana 44IFS, Dana 50, and Dana 50IFS\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655862493261,"sku":"1044","price":43.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1044_1200_clean__26998_22003__66828.1707817543.1280.1280.jpg?v=1742469871"},{"product_id":"473-vsg4550-axle-u-joint-with-internal-c-clip-service-dvd-video","title":"VSG4550 Axle U-Joint with Internal C-Clip Service DVD Video","description":"\u003cp\u003e\u003cstrong\u003eVSG4550 Axle U-Joint with Internal C-Clip Service DVD Video\u003c\/strong\u003e featuring both greaseable and non-greaseable u-joints.\u003c\/p\u003e","brand":"Dan the Gear Man","offers":[{"title":"Default Title","offer_id":41655951949901,"sku":"473","price":10.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/1891133873358730495-49963__77192_159__60016.1707819037.1280.1280.jpg?v=1742471565"},{"product_id":"1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip","title":"QT1100 1\" X 8\" Driver Handle for Installers \u0026 Removers with 5\/8\" Tip","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1100 1\" x 8\" Standard Duty Installer Driver Handle with 5\/8\" Tip \u003c\/strong\u003eand knurled hand grip is used with \u003ca href=\"\/collections\/wheel-bearing-and-hub-tools\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eQT15XX\u003c\/span\u003e\u003c\/a\u003e series Seal Installers and \u003ca href=\"\/collections\/bearing-cup-installers\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eQT18XX\u003c\/span\u003e\u003c\/a\u003e series Bearing Cup Installers with 5\/8\" center holes. QT1100 will become one of the most used tools in your shop as it fits almost all our time saving seal and bearing cup installers. Give up those part wrecking, time wasting, hand smashing jury-rig installers and do the job quickly and efficiently with QT1100 and the correct seal and cup installers for your application! Black Oxide finish\u003cem\u003e.\u003c\/em\u003e 1\" diameter x 8\" usable length for general purpose use. Made in Montana, U.S.A.\u003c\/p\u003e\n\u003cp\u003eSee \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116 for the Pro-Duty\u003c\/a\u003e 1-1\/4\"x 8\" Driver Handle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eFor 5\/8\" Center Hole\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eFront Wheel Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eFront Wheel Seal Installers\u003c\/strong\u003e \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eFront Spindle and Axle Shaft Seal, Bearing, Bushing Installers\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eRear Wheel Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eRear Wheel Bearing Seal Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eSemi-Float Rear Axle Wheel Bearing Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003ePinion Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eDifferential Side Bearing Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note10\"\u003e\u003cstrong\u003eTransmission Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note11\"\u003e\u003cstrong\u003eTransmission Seal Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note12\"\u003e\u003cstrong\u003eTransfer Case Bearing Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note13\"\u003e\u003cstrong\u003eTransfer Case Seal Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note14\"\u003e\u003cstrong\u003eSteering Gear Bearing and Seal Installers\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFor 5\/8\" Center Hole\u003c\/strong\u003e\u003cbr\u003eMade for QUAD 4x4 Bearing and Seal installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e 8\", \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e 14\" and 1-1\/4\" diameter for professional use (\u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e 8\", \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e 14\").\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFront Wheel Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy\/GMC 1 Ton Dana 60 Front Axle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e Installs \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e and \u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50446\u003c\/a\u003e or Timken Bearing Cups JLM104910 and LM104911\u003cbr\u003e\u003ca href=\"\/products\/1804-qt1804-bearing-cup-installer-3-13-16-approximate-outside-diameter\" target=\"_blank\"\u003eQT1804\u003c\/a\u003e Installs \u003ca href=\"\/products\/50396-qu50396-timken-3-13-16-od-taper-wheel-or-diff-bearing-cup\" target=\"_blank\"\u003eQU50396\u003c\/a\u003e and \u003ca href=\"\/products\/50413-qu50413-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50413\u003c\/a\u003e or Timken Bearing Cups 382A and 28622\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFront Wheel Seal Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy\/GMC 1 Ton Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFront Spindle and Axle Shaft Seal, Bearing, Bushing Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRear Wheel Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xvd284-2019-up-ram-4500-5500-drw-rear-hub-aam-12-exploded-view\"\u003eXVD284 2019-up Ram 4500, 5500 DRW Hub\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e Installs \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e and \u003ca href=\"\/products\/50732-qu50732-timken-high-performance-outer-wheel-bearing-cup\" target=\"_blank\"\u003eQU50732\u003c\/a\u003e,or Timken Bearing Cups LM104911 and NP913325\u003cbr\u003e\u003ca href=\"\/products\/1804-qt1804-bearing-cup-installer-3-13-16-approximate-outside-diameter\" target=\"_blank\"\u003eQT1804\u003c\/a\u003e Installs \u003ca href=\"\/products\/50396-qu50396-timken-3-13-16-od-taper-wheel-or-diff-bearing-cup\" target=\"_blank\"\u003eQU50396\u003c\/a\u003e, \u003ca href=\"\/products\/50413-qu50413-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50413\u003c\/a\u003e, \u003ca href=\"\/products\/50623-qu50623-inner-rear-wheel-bearing-cup-for-ford-sterling-10-5-rear-axles\" target=\"_blank\"\u003eQU50623\u003c\/a\u003e, and \u003ca href=\"\/products\/50735-qu50735-timken-high-performance-inner-wheel-bearing\" target=\"_blank\"\u003eQU50735\u003c\/a\u003e or Timken Bearing Cups 382A, 28622, NP064306, and NP706218\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRear Wheel Bearing Seal Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSemi-Float Rear Axle Wheel Bearing Installers \u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePinion Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e Installs \u003ca href=\"\/products\/50404-qu50404-timken-inner-or-outer-pinion-bearing-cup\" target=\"_blank\"\u003eQU50404\u003c\/a\u003e or Timken Bearing Cup M802011\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDifferential Side Bearing Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note10\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 10:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransmission Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e installs \u003ca href=\"\/products\/10125-qu10125-timken-nv4500-input-bearing-cup\" target=\"_blank\"\u003eQU10125\u003c\/a\u003e (NV4500) \u003ca href=\"\/products\/10137-qu10137-timken-special-1996-2007-gm-nv4500-input-bearing-cup\" target=\"_blank\"\u003eQU10137\u003c\/a\u003e (NV4500), and \u003ca href=\"\/products\/12051-qu12051-timken-countershaft-center-bearing-cup-for-nv5600-6-speed\" target=\"_blank\"\u003eQU12051\u003c\/a\u003e (NV5600) or Timken Bearing Cups M802011AP, NP728109, NP882000\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note11\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 11:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransmission Seal Installers \u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note12\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 12:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransfer Case Bearing Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note13\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 13:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransfer Case Seal Installers \u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note14\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 14:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e \u003cstrong\u003eSteering Gear Bearing and Seal Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656049827917,"sku":"1100","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT1100_094348_1600__42281_29740__36096.1708621796.1280.1280.png?v=1742473547"},{"product_id":"1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks","title":"QT1812 Inner\/Outer Bearing Cup Installer for Chevy, Dodge, Ford, GMC, and Jeep SUVs \u0026 Trucks","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1812 Outer Pinion Bearing Cup Installer\u003c\/strong\u003e is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep SUV's, 1\/2, 3\/4 and 1 ton trucks from 1942 to current. QT1812 fits our \u003ca href=\"\/products\/50400-qu50400-timken-outer-pinion-bearing-cup-for-dana-60-61-70-70hd-axles\" target=\"_blank\"\u003eQU50400\u003c\/a\u003e (Dana Axle Outer Pinion), \u003ca href=\"\/products\/50539-qu50539-timken-pinion-bearing-cup\" target=\"_blank\"\u003eQU50539\u003c\/a\u003e (Inner or Outer Axle Pinion), \u003ca href=\"\/products\/50533-qu50533-timken-outer-pinion-bearing-cup\" target=\"_blank\"\u003eQU50533\u003c\/a\u003e (Dana Axle Outer Pinion), and \u003ca href=\"\/products\/50574-qu50574-timken-bearing-cup-for-jeep-rear-wheel-applications\" target=\"_blank\"\u003eQU50574\u003c\/a\u003e (Dana 20, 21, 300 Transfer Cases) bearing cups. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5\/8\" tip. USA Made. Be sure to read Tech Notes below!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eCup Installer\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eDriver Handle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eRedesigned\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCup Installer \u003c\/strong\u003e\u003cbr\u003eUsing a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Driver Handle\u003c\/strong\u003e\u003cbr\u003eI recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for most applications and a 14\" handle (\u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e) for deep set inner pinion, rear hub and transmission bearing cups.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e Redesigned\u003c\/strong\u003e\u003cbr\u003eAs of May 1, 2011, QT1812 was redesigned to fit more applications. The current QT1812 replaces our previous QT1812 and QT1815 tools. The new QT1812 Installer is made to install all these Timken® Taper Bearing Cup numbers: 02820, 25821, HM88510, and HM88610. QT1812 Installers sold before that date only work on 02820, 25821, and HM88510.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eTransfer Case Rear Output Shaft Front Bearing Applications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e Bronco Dana 20 Transfer Case: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F100 with 3 speed transmission and Dana 20 Transfer Case 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F100 with 4 speed transmission and single speed Dana 21 Transfer Case\u003cbr\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e All Scout with Dana 20 Transfer Case\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e All 1972, 1973\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e All models with manual transmissions 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #993366;\"\u003e\u003cstrong\u003eDana Axle Models 25, 27, 30, 44, 50, 53\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e 1942 to Present\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #333300;\"\u003e\u003cstrong\u003eHeavy-Duty Outer Pinion Bearing Cup Applications\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDana Axle:\u003c\/strong\u003e Models 60, 61 and 70 1954-present. These axle models are found in many heavy 1\/2 ton, 3\/4 ton, and 1 ton front and rear axles used by Chevy\/GMC, Dodge, Ford, IHC, and Jeep. The Dana 70 was also used by Dodge and International as a front axle on 1-1\/2 ton trucks. \u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e 1500HD \u0026amp; 2500 with 14 bolt 9.5\" Ring Gear 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #800080;\"\u003e\u003cstrong\u003eFront Outer Pinion Bearing Cup Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e K2500 \u0026amp; K3500 9.25\" Ring Gear IFS Axle 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #993300;\"\u003eFront Inner Pinion Bearing Applications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAMC:\u003c\/strong\u003e Eagle\u003cbr\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e 1500 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F250 with 4600 lb. Dana Model 50 Twin Traction Beam IFS Axle 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F250 All 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F350 with Dana Model 50 Twin Traction Beam IFS Axle 1980, 1981, 1982, 1983, 1984 \u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e Bronco, F-150 Model 44 IFS Axle 1992.5, 1993, 1994, 1995, 1996\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F250, F350 Single Rear Wheel Dana Model 50 Monobeam Axle 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e All CJ, TJ, WJ, XJ, YJ, ZJ with Model 30 Front Axles 1972-up\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative;\"\u003e\u003ciframe width=\"320\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" height=\"240\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656052056141,"sku":"1812","price":23.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1812-clean-1280__13790.1723838131.1280.1280.jpg?v=1742473588"},{"product_id":"1819-qt1819-knuckle-bearing-cup-installer-for-dana-25-27-30-44-front-axles","title":"QT1819 Knuckle Bearing Cup Installer for Dana 25, 27, 30 \u0026 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1819 Knuckle Bearing Cup Installer for Dana 25, 27, 30 and 44 Front Axles\u003c\/strong\u003e is used to install \u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e Steering Knuckle Bearing Cups in 1953-1975 standard duty Dana 25, 27, 30, 44 closed knuckle front axles in Chevy, Dodge, Ford, GMC, IHC, Jeep, and Studebaker 4x4s. QU1819 is also the correct tool to drive in the King Pin Bearing Cups for 1966-1971 Ford Bronco Dana 30 and 1967-1971 F-100 Dana 44 open knuckle axles. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eCup Installer\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eHandle\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"#video\"\u003eVideo\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCup Installer \u003c\/strong\u003e\u003cbr\u003eUsing a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e \u003cstrong\u003eHandle\u003c\/strong\u003e\u003cbr\u003eI recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for Knuckle Bearing Cup Installation.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eGM 4x4 Suburban, K10, K15, K20, K25 Dana 44 Standard Closed Knuckle Axle: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e\u003cbr\u003eW100, W200 Dana 44 Standard Closed Knuckle Front Axle: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eBronco Dana 30 Open Knuckle King Pin Axle: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eF-250 Dana 44 Closed Knuckle Standard Duty Front Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 F-100, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF-100 Dana 44 Open Knuckle King Pin Axle: 1967, 1968, 1969, 1970, 1971\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eInternational\u003c\/strong\u003e\u003cbr\u003eScout Dana 27, Dana 30 Closed Knuckle Front Axles: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eDana 44 Closed Knuckle 1\/2 ton and light 3\/4 ton: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e\u003cbr\u003eDana 25, Dana 27, Dana 44 Closed Knuckle 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eStudebaker\u003c\/strong\u003e\u003cbr\u003eDana 44 Closed Knuckle Front Axles 4x4 Pickups: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative;\"\u003e\u003ciframe width=\"320\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" height=\"240\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656076795981,"sku":"1819","price":26.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT1812_clean__33818_24916__12839.1707820954.1280.1280.png?v=1742473881"},{"product_id":"1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip","title":"QT1101 1\" X 14\" Driver Handle for Installers and Removers. 5\/8\" Tip","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1101 14\" Standard Duty Installer Driver Handle\u003c\/strong\u003e with knurled hand grip are used with \u003ca rel=\"noopener\" href=\"\/collections\/wheel-bearing-and-hub-tools\" target=\"_blank\"\u003e\u003cspan\u003eQT15XX\u003c\/span\u003e \u003c\/a\u003eseries Seal Installers and \u003ca rel=\"noopener\" href=\"\/collections\/bearing-cup-installers\" target=\"_blank\"\u003e\u003cspan\u003eQT18XX\u003c\/span\u003e \u003c\/a\u003eseries Bearing Cup Installers with 5\/8'\" center holes. 1\" diameter x 14\" usable length for deep seated seals and bearings. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eInstallers with 5\/8” Center Hole\u003c\/strong\u003e\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallers With 5\/8” Center Hole \u003c\/strong\u003e\u003cbr\u003eMade for installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003cspan style=\"color: #333333;\"\u003eQT1101\u003c\/span\u003e) and 1-1\/4\" diameter for professional use (\u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656078270541,"sku":"1101","price":42.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1101_1600__60448_29744__44278.1708621800.1280.1280.png?v=1742473932"},{"product_id":"1802-qt1802-bearing-cup-installer-2-7-8-approximate-outside-diameter","title":"QT1802 Bearing Cup Installer 2-7\/8\" Approximate Outside Diameter","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e QT1802 Bearing Cup Installer \u003c\/strong\u003eis specifically machined to fit QU10142, QU10145, QU50447, QU50629, and QU50653 bearing cups commonly used in axle, transmission and wheel applications. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5\/8\" tip. Made in Montana, U.S.A.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUsing Installer\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eAvailable Handles\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"#note3\"\u003eCompatible with Timken\u003c\/a\u003e\u003c\/strong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUsing Installer\u003c\/strong\u003e\u003cbr\u003e Using a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools. See \u003ca href=\"#video\"\u003eVideo\u003c\/a\u003e below.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAvailable Handles\u003c\/strong\u003e\u003cbr\u003e I recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for most applications and a 14\" handle (\u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e) for deep set inner pinion, rear hub and transmission bearing cups.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCompatible with Timken Numbers\u003c\/strong\u003e\u003cbr\u003e QT1802 is compatible with these Timken or industry standard bearing cups: LM102910, LM102910P, LM501310, LM501310P, and LM501314\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e \u003cspan style=\"color: #ff6600\"\u003eUse QT1802 Cup Installer for These Transmission Countershaft Front Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll with NV4500 5 Speed Manual Transmission (MW3, MT8 codes): 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e:\u003cbr\u003e All Ram 2500, Ram 3500 with NV4500 and NV4500HD 5 Speed Manual Transmission: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff00ff\"\u003eUse QT1802 Cup Installer for These Front Inner Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eIHC\u003c\/strong\u003e:\u003cbr\u003eScout: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e:\u003cbr\u003eCJ5, CJ6, CJ, CJ7, CJ8: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e All Jeepster Commando and Scrambler \u003cbr\u003e J Series Light Duty: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #008000\"\u003eUse QT1802 Cup Installer for These Front Outer Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e: \u003cbr\u003e Full Size Blazer\/ Jimmy and Suburban: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e 1\/2 Ton K10\/15\/K1500\/V1500: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003e 3\/4 Ton K20\/25\/2500\/V2500: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e: \u003cbr\u003e Bronco: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e F100, F150: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e F250 Model 44 Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003e W100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003e W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e W250 (Gas): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC\u003c\/strong\u003e: \u003cbr\u003e Scout: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e: \u003cbr\u003e CJ5, CJ6, CJ7, CJ8: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e All Jeepster Commando and Scrambler \u003cbr\u003e J-Series Full Size Cherokee, Wagoneer, Pickup, FC150: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eToyota\u003c\/strong\u003e:\u003cbr\u003eLandcruiser, 4 Runner and Pickup: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff\"\u003eUse QT1802 Cup Installer for These Rear Outer Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eToyota:\u003c\/strong\u003e\u003cbr\u003e Landcruiser with full float rear axle: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 192, 1993, 1994, 1995, 1996, 1997\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative\"\u003e\u003ciframe allowfullscreen=\"\" height=\"240\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" width=\"320\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e \u003cscript src=\"https:\/\/player.vimeo.com\/api\/player.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656081743949,"sku":"1802","price":32.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1802_1_1200_clean__63711_16535__19685.1707821136.1280.1280.jpg?v=1742474029"},{"product_id":"1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle","title":"QT1116 1-1\/4\" x 8\" Pro Duty Installer Driver Handle","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1116 8\" Pro Duty Installer Driver Handle\u003c\/strong\u003e with knurled hand grip are used with \u003ca href=\"\/collections\/wheel-bearing-and-hub-tools\" target=\"_blank\" rel=\"noopener\"\u003eQT15XX \u003c\/a\u003eseries Seal Installers and \u003ca href=\"\/collections\/bearing-cup-installers\" target=\"_blank\" rel=\"noopener\"\u003eQT18XX \u003c\/a\u003eseries Bearing Cup Installers with 5\/8'\" center holes. Black Oxide finish. 1.25\" diameter x 8\" usable length for general purpose use. Black Oxide Finish. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eFor 5\/8” Center Hole\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFor 5\/8” Center Hole\u003c\/strong\u003e\u003cbr\u003eMade for installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e) and 1-1\/4” diameter for professional use (QT1116, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656098881613,"sku":"1116","price":39.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1116_clean__59047_29750__09256.1708621816.1280.1280.png?v=1742474250"},{"product_id":"1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles","title":"QT1161 Seal Installer Thrust Plate for Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQT1161 Seal Installer Thrust Plate for 1955-2006 Dana 44 Front Axles\u003c\/strong\u003e is used with \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Press Screw and the correct Seal Installer for your axle to install the inner axle shaft oil seals in 1955-2006 Dana 44 4x4 solid beam front axles without vacuum controlled Central Axle Disconnect. Applications include Chevy\/GMC 1960-1980, Dodge 1957-1984, Ford 1959-1979, IHC 1955-1980, and Jeep J-Series 1962-1991, and Jeep Wrangler Rubicon 2003-2006. Made in U.S.A. by Us Here in Montana.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMust be Removed\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMust be Removed\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace the axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eThrust Plate fits against Differential Bore Face when pressing in opposite axle seal. (Thrust Plate has 5\/8\" ID center hole.)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJ-Series Dana 44 Front Axles: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eWrangler Rubicon Dana 44 Front Axles: 2003, 2004, 2005, 2006\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656112513101,"sku":"1161","price":41.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1161__53255_7535__94303.1707821970.1280.1280.jpg?v=1742474643"},{"product_id":"1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle","title":"QT1119 1-1\/4\" x 14\" Pro Duty Installer Driver Handle","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1119 14\" Pro Duty Installer Driver Handle\u003c\/strong\u003e with knurled hand grip are used with \u003ca rel=\"noopener\" href=\"\/collections\/wheel-bearing-and-hub-tools\" target=\"_blank\"\u003eQT15XX \u003c\/a\u003eseries Seal Installers and \u003ca rel=\"noopener\" href=\"\/collections\/bearing-cup-installers\" target=\"_blank\"\u003eQT18XX \u003c\/a\u003eseries Bearing Cup Installers with 5\/8'\" center holes. 1.25\" diameter x 14\" usable length for deep seated seals and bearings. Made in Montana, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eInstallers with 5\/8” Center Hole Made for insta\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallers with 5\/8” Center Hole\u003c\/strong\u003e\u003cbr\u003eMade for installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e) and 1-1\/4\" diameter for professional use (\u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e, QT1119).\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656122081357,"sku":"1119","price":47.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1119_1_clean-cropped-webp__70723_29782__81086.1708621880.1280.1280.jpg?v=1742474911"},{"product_id":"1115-qt1115-dana-44-differential-side-bearing-installer","title":"QT1115 Dana 44 Differential Side Bearing Installer","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1115 Dana 44 Differential Side Bearing Installer \u003c\/strong\u003efor all Dana-Spicer Model 44 front or rear axles. QT1115 features a raised internal ring that contacts the bearing inner face so you can press or drive your diff bearings on without damaging the cage. 5\/8\" center hole accepts our \u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100 \u003c\/a\u003eor \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116 \u003c\/a\u003eDriver Handles or any other driver with a 5\/8\" pilot. Made in Montana, U.S.A.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eTool Benefits\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool Benefits\u003c\/strong\u003e\u003cbr\u003eOver the years, I have seen a lot of diff bearings installed with makeshift methods that failed prematurely. The soft cage and both the hardened rollers and races are easily damaged from rough handling. Bearings are kind of like eggs, they can take tremendous pressures in certain directions, but are easily wrecked by applying impact force in the wrong place. The big difference is a bearing that fails can cause an accident that injures or kills you, while crushing an egg just means you get some shell bits in your omelette! With the QT1115, your installation force is applied entirely to the inner race face, thereby preventing you from harming the cage, races, or rollers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eMost 1965-1999 Dana 44 Front or Rear Axles\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656123752525,"sku":"1115","price":30.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1115__84403_7523__20671.1707822451.1280.1280.jpg?v=1742474957"},{"product_id":"710-tmj73cd-1973-jeep-all-models-factory-service-manual-on-cd","title":"TMJ73USB 1973 Jeep All Models Factory Service Manual on USB","description":"\u003cp\u003e\u003cstrong\u003eTMJ73USB 1973 Jeep All Models Factory Service Manual on USB\u003c\/strong\u003e covers body, chassis, mechanical, and electrical. There are sections on suspension, driveline\/axle, brakes, engine, transmission, body, accessories, etc. This USB includes wiring diagrams. The books are loaded with diagrams and illustrations to show you how to disassemble, repair, and reassemble the various components and frequently gives troubleshooting information. All pages are available to print out as an instant reference while working in the garage, away from the computer. \u003cspan style=\"color: #ff0000\"\u003eIMPORTANT: This Shop Manual does \u003cstrong\u003eNOT\u003c\/strong\u003e cover Major Component Overhaul Procedures!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eTMJ73USB Supersedes TMJ73CD 1973 Jeep All Models Factory Service Manual on CD\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003e1973 Jeep:\u003c\/strong\u003e\u003cbr\u003eCJ-5\u003cbr\u003eCJ-6\u003cbr\u003eDJ-5\u003cbr\u003eDJ-6\u003cbr\u003eCommando\u003cbr\u003eWagoneer\u003cbr\u003eTruck\u003c\/p\u003e\n","brand":"OEM Shop Manual","offers":[{"title":"Default Title","offer_id":41656203444301,"sku":"710","price":44.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/Manuals_on_USB_400_transparent_8c42f35f-e51d-4800-a990-e56190cabfba.png?v=1758916926"},{"product_id":"711-tmj72cd-1972-jeep-all-models-factory-service-manual-on-cd","title":"TMJ72USB 1972 Jeep All Models Factory Service Manual on USB","description":"\u003cp\u003e\u003cstrong\u003eTMJ72USB 1972 Jeep All Models Factory Service Manual on USB\u003c\/strong\u003e covers body, chassis, mechanical, and electrical. There are sections on suspension, driveline\/axle, brakes, engine, transmission, body, accessories, etc. This USB includes wiring diagrams. The books are loaded with diagrams and illustrations to show you how to disassemble, repair, and reassemble the various components and frequently gives troubleshooting information. All pages are available to print out as an instant reference while working in the garage, away from the computer. \u003cspan style=\"color: #ff0000\"\u003eIMPORTANT: This Shop Manual does \u003cstrong\u003eNOT\u003c\/strong\u003e cover Major Component Overhaul Procedures!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eTMJ72USB Supersedes TMJ72CD 1972 Jeep All Models Factory Service Manual on CD\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003e1972 Jeep 4WD:\u003c\/strong\u003e\u003cbr\u003eCJ-5\u003cbr\u003eCJ-6\u003cbr\u003eWagoneer\u003cbr\u003eTruck\u003c\/p\u003e\n","brand":"OEM Shop Manual","offers":[{"title":"Default Title","offer_id":41656204197965,"sku":"711","price":44.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/Manuals_on_USB_400_transparent_966b6e97-149a-436f-9806-a14c76612d11.png?v=1758916534"},{"product_id":"712-tmj67jcd-1967-1971-jeep-j-series-factory-service-manual-on-cd","title":"TMJ67JCD 1967-1971 Jeep J-Series Factory Service Manual on CD","description":"\u003cp\u003e\u003cstrong\u003eTMJ67JCD 1967-1971 Complete Jeep J-Series Factory Service Manual on CD\u003c\/strong\u003e covers body, chassis, mechanical, and electrical. There are sections on suspension, driveline\/axle, brakes, engine, transmission, body, accessories, etc. This CD includes wiring diagrams. The books are loaded with diagrams and illustrations to show you how to disassemble, repair, and reassemble the various components and frequently gives troubleshooting information. All pages are available to print out as an instant reference while working in the garage, away from the computer. \u003cspan style=\"color: #ff0000\"\u003eIMPORTANT: This Shop Manual does \u003cstrong\u003eNOT\u003c\/strong\u003e cover Major Component Overhaul Procedures!\u003c\/span\u003e\u003c\/p\u003e","brand":"OEM Shop Manual","offers":[{"title":"Default Title","offer_id":41656205181005,"sku":"712","price":44.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/67_j_series-712__94830_22604__34656.1707823753.1280.1280.jpg?v=1742477152"},{"product_id":"1200-qt1200i-tie-rod-separator","title":"QT1200i Tie Rod Separator","description":"\u003cp\u003e\u003cstrong\u003eQT1200 Tie Rod Separator\u003c\/strong\u003e separates most tie rods, drag links, \u0026amp; track bars without damaging the stud or seal with this rugged puller. Way better than a \"pickle fork\", A real time saver! Made in Taiwan. \u003cstrong\u003eNOT FOR IMPACT USE!\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy \u0026amp; GMC Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWill Not Damage \u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eLate 1970’s F-250 and F-350\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#safety\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWill Not Damage \u003c\/strong\u003e\u003cbr\u003e Ball Joint and King Pin service almost always includes separating the tie rods and\/or drag link from the steering knuckle. Traditionally, this was done with a wedge shaped \"pickle fork\" type tool that is driven between the steering arm and linkage end. Invariably, these tools tear or destroy the seal on the tie rod or drag link, and as often as not, damage the tie rod itself. On the other hand, as long as there is room to engage the puller jaws on the steering arm, our QT1200 will not damage either the seal or linkage end because the force is applied directly to the tip of the linkage stud. The long and short of the story is this tool will save you money in the long run on the parts you won't have to buy, plus you won't be driving around with steering linkage screwed up by a pickle fork!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Late 1970's F-250 and F-350\u003c\/strong\u003e\u003cbr\u003eThere are a few vehicle models with metal covered compression seals which will call for some ingenuity to use this tool. Included would be some late 1970's F-250 and F-350 4x4's, some of the full size Jeep J-series models, and 1998-1999 Dodge Ram 2500 and 3500 4x4s. On these models, you will need to force the jaw tips between the steering arm and steel seal plate and hold them in place as you tighten the press screw (I use a welding clamp to hold the jaws together). Yes, this will distort the plate, but it is still going to be a lot less damaging than using a pickle fork.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"safety\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eSafety Notes:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cspan style=\"color: #ff0000\"\u003eUsing any puller can be dangerous due to force applied to the tool and parts. \u003cstrong\u003eWearing eye protection is a must.\u003c\/strong\u003e You also need to be aware that both the tool and steering linkage may go flying when the linkage suddenly separates from the steering arm. You can attach a piece of wire between the frame and linkage to keep the linkage from dropping. As for the tool, it is usually not feasible to tie something to it, but keeping your body and face well clear should keep you out of the way as the tool drops to the floor.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eCan be used on auto and truck steering linkages with flexible seals up through 1-1\/2 ton models. \u003cbr\u003e This tool may be difficult but not impossible to use on some vehicles with stacked disc type seals utilizing a steel outer protector. Examples would be 1999, 2000 Dodge Ram 2500 and 3500 trucks and some late 1970's Ford F-250 and F-350 4x4's\u003cbr\u003eF-250 Dana 50IFS: 1995, 1996, 1997\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656247255117,"sku":"1200","price":74.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1200i_1_1200_clean__86672_15807__55378.1707825423.1280.1280.jpg?v=1779173791"},{"product_id":"1229-qt1229-hd-differential-bearing-puller","title":"QT1229 HD Differential Bearing Puller","description":"\u003cp\u003e\u003cstrong\u003eQT1229 HD Differential Bearing Puller\u003c\/strong\u003e for most 3\/4 and 1 ton front or rear axles.\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656273502285,"sku":"1229","price":1302.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1229clean__91523_7564__64841.1707826803.1280.1280.jpg?v=1778722604"},{"product_id":"4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set","title":"TS4871 Dana 44 Inner Fixed Depth Axle Seal Tool Set","description":"\u003cp style=\"text-align: left\"\u003e\u003cstrong\u003eTS4871 Dana 44 Inner Fixed Depth Axle Seal Tool Set\u003c\/strong\u003e Quickly and easily installs \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seal in vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press in your new Inner Axle Seals to the exact depth and without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Kit Includes \u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Thrust Plate, \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e Installer, and \u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Press Screw. USA Made.\u003c\/p\u003e \u003cp style=\"text-align: left\"\u003eAlso See \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Seal and Tool Kit.\u003c\/p\u003e \u003cp style=\"text-align: left\"\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eRemoval\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eTech Note 2\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eDepth Stop\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eSeal\/Tool Match\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eClean\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \n\n\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRemoval\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace your \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e inner axle shaft seals. \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e tyle=\"color: #ff0000\"\u0026gt;\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e \u003cstrong\u003eSeal Variance\u003c\/strong\u003e\u003cbr\u003eThe inner axle seals used on Chevy, Dodge, Ford, GMC, IHC, and Jeep closed and open knuckle Dana Model 44 Front Axles will vary by year and model. Refer to the below to access our  \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e model specific application pages.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDepth Stop\u003c\/strong\u003e\u003cbr\u003eTS4871 uses \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e application specific Depth Stop Seal Installer which has a raised flange on it that will stop against the Dana 44 axle bore face when \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e seal is at the correct depth.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSeal\/Tool Match\u003c\/strong\u003e\u003cbr\u003eDue to the way we have to make the tool to function, your Seal Installer and Seal MUST match. \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e Installer will only work with original equipment design, CR manufactured seals such as our \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e. Seals manufactured by other seal manufacturers WILL NOT WORK WITH THIS INSTALLER!!!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eClean\u003c\/strong\u003e\u003cbr\u003eOnce the axle is disassembled, the old seals can be easily removed with our \u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Seal Remover Tool Set or other suitable tool such as a length of sturdy pipe that will fit inside the axle tube. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250: 1967, 1968, 1969\u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972½, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971½, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656289755213,"sku":"4871","price":174.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/ts4871__58209_8619__76559.1707827906.1280.1280.jpg?v=1778720563"},{"product_id":"4872-qk4872-dana-44-axle-seal-kit-with-adjustable-depth-axle-seal-tool-set","title":"QK4872 Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set","description":"\u003cdiv class=\"col-md-8\"\u003e \u003cp\u003e\u003cstrong\u003eQK4872 Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set\u003c\/strong\u003e Quickly and easily installs \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seals in 1950's to 1980's vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See \u003ca href=\"\/products\/994872-ts4872-dana-44-adjustable-depth-inner-axle-seal-tool-set\" target=\"_blank\"\u003eTS4872\u003c\/a\u003e Tool Set only, or See \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e for Fixed Depth Option.\u003c\/p\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMust be Removed\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSee Article\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eAdjustable Depth\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eUse Correct Seals\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eRemoval of Old Seals\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eEarly Dana 44 Axles\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eQK4872 Inner Axle Seal Installation Kit Include:\u003cbr\u003e(2) \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seals\u003cbr\u003e\u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Model 44 Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Model 44 Press Screw Assembly\u003cbr\u003e\u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Model 44 Specific Thrust Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMust be Removed\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace your \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e inner axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSee Article\u003c\/strong\u003e\u003cbr\u003eThe inner axle seals used on Chevy, Dodge, Ford, GMC, IHC, and Jeep closed and open knuckle Dana Model 44 Front Axles will vary by year and model. \u003ca href=\"\/products\/4933-qk4933-dana-44-front-inner-axle-seal-and-install-tool-kit\"\u003eSee Article.\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAdjustable Depth\u003c\/strong\u003e\u003cbr\u003eQK4872 uses \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e application specific adjustable depth installer which allows you to offset the seal to miss a worn spot on the axle shaft. This is a valuable feature, however, YOU have to determine the final depth of the seal. It is unlikely, but possible to seat the seal too deep with \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e installer which can put the seal beyond the machined seal surface of the axle shaft. We also offer \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Seal Installer Set which uses \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e specific Depth Stop Seal Installer which has a raised flange on it that will stop against the axle bore face when the seal is at the correct depth. This is a more fool-proof setup than QK4872, but it is a little more expensive and you can not vary the seal depth to miss a groove worn in the axle shaft.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse Correct Seals\u003c\/strong\u003e\u003cbr\u003eDue to the way we have to make the tool to function, your Seal Installer and Seal MUST match. \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Installer will only work with original equipment design, CR manufactured seals such as our \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e. Seals manufactured by other seal manufacturers WILL NOT WORK WITH THIS INSTALLER!!!!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRemoval of Old Seals\u003c\/strong\u003e\u003cbr\u003eOnce the axle is disassembled, the old seals can be easily removed with our \u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Seal Remover Tool Set or other suitable tool such as a length of sturdy pipe that will fit inside the axle tube. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eEarly Dana 44 Axles\u003c\/strong\u003e\u003cbr\u003eMost closed knuckle and early production Dana 44 axles used a two piece axle seal and guide set that had \u003ca href=\"\/products\/42015-qu42015-inner-front-axle-shaft-seal-for-dana-44-and-dana-60\" target=\"_blank\"\u003eQU42015\u003c\/a\u003e seal and a separate sheet metal guide. \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Seal replaces both parts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250: 1967, 1968, 1969\u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003e\u003c\/strong\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972½, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIHC: \u003cbr\u003e\u003c\/strong\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971½, 1972, 1973, 1974, 1975\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJeep:\u003cbr\u003e\u003c\/strong\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656290082893,"sku":"4872","price":194.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4872_2107_1600__52571_21188__25727.1708622040.1280.1280.png?v=1778718667"},{"product_id":"4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late","title":"TK4926 Torque King® Front Wheel Bearing and Seal Kit Late","description":"\u003cp\u003e\u003cstrong\u003eTK4926 Torque King® Front Wheel Bearing and Seal Kit\u003c\/strong\u003e fits 1969 to 1974 Dodge and 1969-1973 Jeep Camper Special Dana 44 Front Axles with 1-3\/4\" thread hex spindle nuts and external mount type wheel hubs.\u003c\/p\u003e \u003cp\u003eNon-Stock Special Order. Please allow 4-10 day lead time to ship.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eIncludes\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003eTK4926 includes these parts:\u003cbr\u003e2 \u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576 \u003c\/a\u003eBend over Tab Lockwasher\u003cbr\u003e2 \u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573 \u003c\/a\u003eTorque King® 6 Bolt Front Hub Gasket\u003cbr\u003e4 \u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701 \u003c\/a\u003eTimken Wheel Bearing Cup\u003cbr\u003e2 \u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702 \u003c\/a\u003eTimken Outer Wheel Bearing\u003cbr\u003e2 \u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703 \u003c\/a\u003eTimken Inner Wheel Bearing\u003cbr\u003e2 \u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704 \u003c\/a\u003eFront Wheel Seal\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW200 with Dana 44 Front Axles: 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003cbr\u003e\u003c\/strong\u003eJ4000, J4800 and Camper Special Dana 44 Front Axles with External Mount Type Wheel Hubs: 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656301191245,"sku":"4926","price":419.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk4926_2015_1600__06773_21174__21671.1707828458.1280.1280.png?v=1742481308"},{"product_id":"4939-tka4939-11-piece-premium-steering-knuckle-shim-kit-dana-25-44-axles","title":"TKA4939 11 Piece Premium Steering Knuckle Shim Kit Dana 25-44 Axles","description":"\u003cp\u003e\u003cstrong\u003eTKA4939 Premium Torque King Knuckle Shim Kit for Dana Closed Knuckle and Ford Open Knuckle Front Axles\u003c\/strong\u003e TKA4939 fits all Dana 25-Dana 44 closed Knuckle Front Axles with 8 Bolt Ball Seals and 1966-197 Ford Dana 30. Dana 44 open knuckle front axles. Kit includes the four shim thicknesses that Dana used for setting precise knuckle rotating preload on 1941-1975 era Dana 25, Dana 27, Dana 30, and Dana 44 closed knuckle front axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s.\u003cbr\u003eEach TKA4939 Shim Kit includes: \u003cbr\u003e(4) 0.003\", (3) 0.005\", (3) 0.010\", and (1) 0.030\" shims so you can precisely adjust your knuckle rotating preload to optimum specifications.\u003c\/p\u003e \u003cp\u003eFor Basic Knuckle Shim Kit, see \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eTKA4939 vs. QU40773\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eTurning Preload\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eTrapezoid Shims\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMeasure\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTKA4939 vs. QU40773\u003c\/strong\u003e\u003cbr\u003eDana originally used 0.003\", 0.005\", 0.010\", and 0.030\" shims to set steering knuckle rotating preload on closed knuckle front axles. Our TKA4939 includes those four sizes which can be used to create almost any required shim pack. Our \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e Kit is inexpensive, but it ONLY includes a single thickness of shims (0.007\" nominal). Used by itself, \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e can only create shim packs in 0.007\" increments which is too great for precise adjustment. If you are on a tight budget AND want to do a good job, I recommend you order 1 each TKA4939 and \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e Kits which will allow you to save money compared to 2 TKA4939 Kits, but still give you the flexibility to make any shim packs needed.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTurning Preload\u003c\/strong\u003e\u003cbr\u003eShims are used between the King Pin Caps and Steering Knuckles to set your Knuckle Bearing\/Bushing turning preload. More shims decreases preload, less shims increases preload. I like to install at least one shim under each bearing cap to act as a gasket. How the shims are distributed between upper and lower caps is up to you. Rotating preload is set by the COMBINED shim pack for each knuckle. If you need a total of 0.050\" shims for your left knuckle, you can split the 0.050\" total between the upper and lower caps as you wish. Most knuckles will require from 0.045\" to 0.065\" of shims. If you need over 0.75\" shims per side, something is probably worn or incorrectly installed.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTrapezoid Shims\u003c\/strong\u003e\u003cbr\u003eSome axles (mainly pickups after 1963) will use Upper King Pin Caps\/Steering Arms with Trapezoid shaped shims. For these axles also see \u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e Product Page. (You will still need either \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e or TKA4939 Kits for the other King Pins.)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMeasure\u003c\/strong\u003e\u003cbr\u003eKing Pin Caps are shimmed to put the specified turning preload on the bearings. The amount of turning preload varies by vehicle and year but the value is measured by a beam or dial type torque wrench (refer to the vehicle manufacturer Service Manual for your specific model specification). Too loose can cause poor steering or \"Death Wobble\", too tight will lead to rapid bearing failure, broken parts, and possible steering loss.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for Knuckle Shim Kits:\u003cbr\u003e\u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e 8 Bolt Knuckle Ball Seal\u003cbr\u003e\u003ca href=\"\/products\/4617-qk4617-dana-axle-small-knuckle-bearing-and-shim-kit\" target=\"_blank\"\u003eQK4617\u003c\/a\u003e Knuckle Bearing Kit\u003cbr\u003e\u003ca href=\"\/products\/50784-tk50784-small-knuckle-king-pin-bearing-only-kit\" target=\"_blank\"\u003eTK50784\u003c\/a\u003e Torque King® Knuckle Bearing Only Kit\u003cbr\u003e\u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e Trapezoid Knuckle Shim\u003cbr\u003e\u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e Timken® Knuckle Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/8950628-qu50628-king-pin-or-knuckle-bearing-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU50628\u003c\/a\u003e Timken® Knuckle Bearing\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevrolet\/GMC:\u003cbr\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e\u003cbr\u003eK10\/K15, K20\/K25: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003eClosed Knuckle Dana 25\u003c\/strong\u003e:\u003cbr\u003eGPW military: 1942, 1943, 1944, 1945\u003cbr\u003e\u003cstrong\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e:\u003cbr\u003eF-100: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250 with standard Model 44 Front Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 27, 30, 44\u003c\/strong\u003e:\u003cbr\u003eScout: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e1\/2 ton and light 3\/4 ton: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003cbr\u003eClosed Knuckle Dana 25, 27, 30, and 44:\u003c\/strong\u003e\u003cbr\u003eMilitary models MB, M38, M38A1, M170: 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957\u003cbr\u003eAll civilian Jeeps: 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eJeep J-Series full size 4x4s: 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStudebaker:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e:\u003cbr\u003e4x4 Pickups: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656303616077,"sku":"4939","price":54.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tka4939clean__34759_8648__17747.1707828658.1280.1280.jpg?v=1742481482"},{"product_id":"5500-qt5500-wheel-bearing-packer-with-cover","title":"QT5500 Wheel Bearing Packer With Cover","description":"\u003cp\u003e\u003cstrong\u003eQT5500 Wheel Bearing Packer with Cover\u003c\/strong\u003e takes the mess out of packing wheel bearings, plus it minimizes the chances of getting contaminants mixed with your wheel bearing grease. I have been using mine for many, many years! The QT5500 Bearing Packer does an absolutely beautiful job of forcing grease between the individual bearing rollers. The easiest and most efficient way to repack tapered roller bearings up to 3-47\/64\" maximum width! Includes clear plastic base that will hold up to 1 pound of most greases, lower plate with o-ring seal, a two piece extendable forcing cone, adapters for smaller bearings, and a black plastic cover. Can be refilled using a grease gun attached to the zerk fitting in the center stem (not visible in photo) or by squeezing the contents of a standard 14 oz. grease tube into the base (like a giant tube of toothpaste). USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003cspan\u003e\u003ca href=\"#note1\"\u003e\u003cspan\u003eSave Time\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e \u003cbr\u003e \u003cspan\u003e\u003ca href=\"#note2\"\u003e\u003cspan\u003eClean\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eJust Over 3-3\/4\" Inside Diameter\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eExploded Views\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e \u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSave Time\u003c\/strong\u003e\u003cbr\u003eQT5500 is one of the slickest tools to have on your tool shelf. Not only does it save time, save grease, and do a better, cleaner job compared to hand packing bearings, the QT5500 reduces your exposure to all the chemicals found in modern greases. Did you ever think about the compounds you force into your skin as you push grease between the rollers when hand packing?\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eClean\u003c\/strong\u003e\u003cbr\u003eAfter greasing, clean any grease that might have gotten on the outside of base. Between jobs, keep your QT5500 covered with a clean rag. To refill, thread the outer part of the forcing cone onto the lower plate stem. Pull up with a rocking motion to break the vacuum. Leave the lower plate in the base in if you are refilling with a grease gun or remove the plate to fill from a tube or bulk grease source. To help you remove the lower plate, it is equipped with an assist spring that will push against the base floor when your grease is all used up.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eJust Over 3-3\/4” Inside Diameter \u003c\/strong\u003e\u003cbr\u003e QT5500 has a inside diameter of just over 3-3\/4\" so it will work on almost all 1 ton and smaller truck 4x4 outer wheel bearings, front inner wheel bearings and single rear wheel inner bearings except 1985-1997 Fords with the 10.25\" rear axle (\u003ca href=\"\/products\/50626-qu50626-timken-inner-wheel-bearing-for-1985-1994-ford-10-25-rear\" target=\"_blank\"\u003eQU50626\u003c\/a\u003e). For dual rear wheel trucks, it is large enough for most GM trucks with the 10.5\" or Dana 70 rear axle and most Fords with Dana 70 or Dana 80 rear axles, however, it is not large enough for 1970s to current Dodge dual rear wheel trucks (\u003ca href=\"\/products\/50624-qu50624-timken-inner-wheel-bearing-for-ford-10-1-2-rear-axles\" target=\"_blank\"\u003eQU50624\u003c\/a\u003e), GM dually trucks with 11.5\" rear axles, or 1985-1997 Ford DRW 10.25\" axles (\u003ca href=\"\/products\/50626-qu50626-timken-inner-wheel-bearing-for-1985-1994-ford-10-25-rear\" target=\"_blank\"\u003eQU50626\u003c\/a\u003e).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eExploded Views:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/collections\/exploded-views-for-4x4s-suvs-light-trucks\" target=\"_blank\"\u003eExploded View Page\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eDodge, GM, Ford, Dana 70, Dana 80\u003cbr\u003e Almost all 1 ton and smaller truck 4x4s (1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018) except 1985-1997 Fords with 10.25” rear axle. \u003cbr\u003e It is not large enough for 1970s to current Dodge dual rear wheel trucks (\u003ca href=\"\/products\/50624-qu50624-timken-inner-wheel-bearing-for-ford-10-1-2-rear-axles\" target=\"_blank\"\u003eQU50624\u003c\/a\u003e), 2011-up GM dually trucks with 11.5\" rear axles, or 1985-1997 Ford 10.25\" axles (\u003ca href=\"\/products\/50626-qu50626-timken-inner-wheel-bearing-for-1985-1994-ford-10-25-rear\" target=\"_blank\"\u003eQU50626\u003c\/a\u003e).\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656344248397,"sku":"5500","price":49.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt5500_1806_1600__04176_21129__85456.1707829536.1280.1280.png?v=1742482411"},{"product_id":"11164-qu11164-1-3-4-thread-spindle-hex-nut-for-dodge-ihc-jeep-dana-44","title":"QU11164 1-3\/4 Thread Spindle Hex Nut for Dodge, IHC, Jeep Dana 44","description":"\u003cp\u003e\u003cstrong\u003e QU11164 1-3\/4 Thread Spindle Hex Nut for Dodge, International, and Jeep Dana 44 Front Axles\u003c\/strong\u003e is an original equipment spec case hardened spindle nut that fits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3\/4\" spindle threads and external mount wheel hubs. Hex size is 2-1\/2\". Use 2 per side, 4 per vehicle. USA Made. Sold individually.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e1.75” Thread\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e This Spindle Nut fits 1957-1974 Dodge, 1956-1975 International, and 1968-1973 Jeep trucks with front spindles that have 1-3\/4' threads and wheel hubs that are drilled and tapped with 6 3\/8\" holes in a 3-3\/4\" bolt circle to mount an external drive flange or lockout hub. Also used for 1966-1975 IHC Dana 60 rear axle applications. \u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e washer is NOT used on 1964-1975 International 1\/2 ton 4x4s or 1969-1974 Dodge W-100 4x4 trucks with 3-3\/8\" diameter internally splined wheel hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1.750” Thread\u003c\/strong\u003e\u003cbr\u003e International and Jeep truck year and model application information is often difficult to precisely list due to the relatively low production numbers and the fact that both manufacturers often built special purpose vehicles for government and vocational applications. Regardless of the application information, if you have a front spindle with 1.750\" thread, QU11164 is the correct part for your 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/11165-qu11165-nla-inner-spindle-thrust-washer-dana-44-front-axles\" target=\"_blank\"\u003eQU11165\u003c\/a\u003e Spindle Nut Thrust Washer\u003cbr\u003e\u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e Spindle Lock Washer (goes between outer and and inner spindle nuts)\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Gasket for Lockout Hub or Drive Flange\u003cbr\u003e\u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704\u003c\/a\u003e Front Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701\u003c\/a\u003e Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702\u003c\/a\u003e Wheel Bearing 1-3\/4\" ID\u003cbr\u003e\u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703\u003c\/a\u003e Wheel Bearing 1-13\/16\" ID \u003cbr\u003e\u003ca href=\"\/products\/4924-tk4924-early-front-wheel-bearing-seal-gasket-kit-for-dana-44-axles\" target=\"_blank\"\u003eTK4924\u003c\/a\u003e Front Wheel Bearing Kit 1957-1968 Dodge and 1956-1971.5 IHC\u003cbr\u003e\u003ca href=\"\/products\/4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late\" target=\"_blank\"\u003eTK4926\u003c\/a\u003e Front Wheel Bearing Kit 1969-1974 Dodge, IHC, and 1968-1973 Jeep\u003cbr\u003e\u003ca href=\"\/products\/1013-qt1013-usa-made-1-2-drive-x-2-5-hex-thin-wall-spindle-nut-socket\" target=\"_blank\"\u003eQT1013\u003c\/a\u003e 2-1\/2\" Hex Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e \u003cstrong\u003eDodge:\u003cbr\u003e\u003c\/strong\u003e W100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 \u003cbr\u003e W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e 100, 1100 1\/2 ton with 6 bolt, external mount hub with 3-3\/4\" bolt circle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963\u003cbr\u003e 120, 1200 3\/4 ton: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003e IHC Dana 60 Rear Axle: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e J4000 with 8000 pound GVW including Camper Special: 1968, 1969, 1970\u003cbr\u003e J4800 with 8000 pound GVW including Camper Special: 1971, 1972, 1973\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656588697677,"sku":"11164","price":29.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11164_1200_clean__87705_11602__26360.1707837905.1280.1280.jpg?v=1742489369"},{"product_id":"11165-qu11165-nla-inner-spindle-thrust-washer-dana-44-front-axles","title":"QU11165 NLA Inner Spindle Thrust Washer Dana 44 Front Axles","description":"\u003cp\u003eDISCONTINUED\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQU11165 Spindle Thrust Washer for Dodge, International, and Jeep Dana 44 Front Axles \u003c\/strong\u003efits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3\/4\" hex spindle nuts and external mount wheel hubs. One of these washers is used on each side between the outer wheel bearing and inner spindle nut. Sold individually.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eTab\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e1.750\" Thread Spindle\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eThis Thrust Washer fits 1957-1974 Dodge, 1956-1975 International, and 1968-1973 Jeep trucks with front spindles that have 1-3\/4' threads and wheel hubs that are drilled and tapped with 6 3\/8\" holes in a 3-3\/4\" bolt circle to mount an external drive flange or lockout hub. \u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576 \u003c\/a\u003ewasher is NOT used on 1964-1975 International 1\/2 ton 4x4s or 1969-1974 Dodge W-100 4x4 trucks with 3-3\/8\" diameter internally splined wheel hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTab\u003c\/strong\u003e\u003cbr\u003eQU11165 Spindle Thrust Washer has an internal tab that fits a 1\/4\" spindle key slot. It is not uncommon to find a spindle with slightly mashed threads at the outboard end which will reduce the slot width. If present, this condition will need to be fixed before you can install the thrust washer.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1.750\" Thread Spindle\u003c\/strong\u003e\u003cbr\u003eInternational and Jeep truck year and model application information is often difficult to precisely list due to the relatively low production numbers and the fact that both manufacturers often built special purpose vehicles for government and vocational applications. Regardless of the application information, if you have a front spindle with 1.750\" thread, QU11165 is the correct part for your 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU11165 Spindle Nut Thrust Washer:\u003cbr\u003e\u003ca href=\"\/products\/11164-qu11164-1-3-4-thread-spindle-hex-nut-for-dodge-ihc-jeep-dana-44\" target=\"_blank\"\u003eQU11164\u003c\/a\u003e Hex Spindle Nut with 1-3\/4\" Thread\u003cbr\u003e\u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e Spindle Lock Washer (goes between outer and and inner spindle nuts)\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Gasket for Lockout Hub or Drive Flange\u003cbr\u003e\u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704\u003c\/a\u003e Front Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701\u003c\/a\u003e Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702\u003c\/a\u003e Wheel Bearing 1-3\/4\" ID\u003cbr\u003e\u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703\u003c\/a\u003e Wheel Bearing 1-13\/16\" ID \u003cbr\u003e\u003ca href=\"\/products\/4924-tk4924-early-front-wheel-bearing-seal-gasket-kit-for-dana-44-axles\" target=\"_blank\"\u003eTK4924\u003c\/a\u003e Front Wheel Bearing Kit 1957-1968 Dodge and 1956-1971.5 IHC\u003cbr\u003e\u003ca href=\"\/products\/4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late\" target=\"_blank\"\u003eTK4926\u003c\/a\u003e Front Wheel Bearing Kit 1969-1974 Dodge, IHC, and 1968-1973 Jeep\u003cbr\u003e\u003ca href=\"\/products\/1013-qt1013-usa-made-1-2-drive-x-2-5-hex-thin-wall-spindle-nut-socket\" target=\"_blank\"\u003eQT1013\u003c\/a\u003e 2-1\/2\" Hex Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003eW200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e100, 1100 1\/2 ton with 6 bolt, external mount hub with 3-3\/4\" bolt circle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963\u003cbr\u003e120, 1200 3\/4 ton: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJ4000 with 8000 pound GVW including Camper Special: 1968, 1969, 1970\u003cbr\u003eJ4800 with 8000 pound GVW including Camper Special: 1971, 1972, 1973\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656588795981,"sku":"11165","price":23.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11165__70856_8041__05434.1707837923.1280.1280.jpg?v=1742489379"},{"product_id":"15000-qu15000-spindle-flat-washer-for-jeep-scout-with-1-5-8-spindle-thread","title":"QU15000 Spindle Flat Washer for Jeep \u0026 Scout with 1-5\/8\" Spindle Thread","description":"\u003cp\u003e\u003cstrong\u003eQU15000 Spindle Flat Washer\u003c\/strong\u003e for Jeep and Scout with 1-5\/8\" Spindle threads. Fits Jeep civilian and military Dana 25, Dana 27, Dana 30 from 1941-1986 Also fits most 1954-1971 Jeep Dana 44 Front Axles plus Dana 25 rear axles in WWII military MA, MB, and GPW. Also found on International Scout from 1961 to 1980.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eLocation\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLocation\u003c\/strong\u003e\u003cbr\u003eQU15000 Spindle Thrust Washer is located between your outer wheel bearing and inner spindle nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QK4669 Spindle Nut Kit:\u003cbr\u003e\u003ca href=\"\/products\/sku-xvj110-1977-1978-5-jeep-cj-7-dana-30-front-wheel-hub-exploded-view\"\u003eXVJ110\u003c\/a\u003e 1977-1978.5 Jeep CJ7 Dana 30 Front Wheel Hub Exploded View\u003cbr\u003e\u003ca href=\"\/products\/15002-qu15002-spindle-lock-washer-for-jeep-and-scout\" target=\"_blank\"\u003eQU15002\u003c\/a\u003e Spindle Lock Washer\u003cbr\u003e\u003ca href=\"\/products\/4669-qk4669-hex-spindle-nut-kit-for-jeeps-and-ihc-scouts\" target=\"_blank\"\u003eQK4669\u003c\/a\u003e Spindle Nut and Washer Kit\u003cbr\u003e\u003ca href=\"\/products\/15005-qu15005-6-bolt-front-hub-gasket\" target=\"_blank\"\u003eQU15005\u003c\/a\u003e 6 Bolt Hub Gasket \u003cbr\u003e\u003ca href=\"\/products\/881011-qt1011-2-1-16-hex-front-spindle-nut-socket-jeep-ihc\" target=\"_blank\"\u003eQT1011\u003c\/a\u003e Thin-Wall 2-1\/16\" Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eJeep and Scout with 1-5\/8\" Spindle Threads\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656629428301,"sku":"15000","price":4.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15000_2__07365_8189__60112.1707842702.1280.1280.jpg?v=1742493421"},{"product_id":"15001-qu15001-front-1-5-8-thread-x-2-1-16-hex-spindle-nut-for-jeep-scout","title":"QU15001 Front 1-5\/8\" Thread x 2-1\/16 Hex Spindle Nut for Jeep \u0026 Scout","description":"\u003cp\u003e\u003cstrong\u003eQU15001 Front Spindle Nut for Jeep and Scout\u003c\/strong\u003e 1-5\/8\" Thread X 2-1\/16 Hex Front Spindle Nut for 1941-1986 Jeep and 1961-1980 IHC Scout. These nuts were used on Scouts to 1980 and most Jeep models except the 1 tons up through 1973. They also fit all 1974-1986 Jeep CJ models.\u003c\/p\u003e \u003cp\u003eAlso See: \u003ca href=\"\/products\/4669-qk4669-hex-spindle-nut-kit-for-jeeps-and-ihc-scouts\" target=\"_blank\"\u003eQK4669\u003c\/a\u003e Spindle Nut Kit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eTwo Used\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eFits\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eAfter Adjustment\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTwo Used\u003c\/strong\u003e\u003cbr\u003eTwo QU15001 Nuts are used for each side.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eHex Nuts fit Jeep and Scout spindles with 1-5\/8\" threads and measure 2-1\/16\" across the flats. Vehicles with Warn Lock-O-Matic Hubs use a special Warn supplied lock washer and outer nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAfter Adjustment\u003c\/strong\u003e\u003cbr\u003eAfter your spindle nuts are properly adjusted, bend a portion of the Lock Washer over one of the flats on the outer Spindle Nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU15001 Spindle Nut:\u003cbr\u003e\u003ca href=\"\/products\/sku-xvj110-1977-1978-5-jeep-cj-7-dana-30-front-wheel-hub-exploded-view\"\u003eXVJ110\u003c\/a\u003e 1977-1978.5 Jeep CJ7 Dana 30 Front Wheel Hub Exploded View \u003cbr\u003e\u003ca href=\"\/products\/15000-qu15000-spindle-flat-washer-for-jeep-scout-with-1-5-8-spindle-thread\" target=\"_blank\"\u003eQU15000\u003c\/a\u003e Spindle Thrust Washer \u003cbr\u003e\u003ca href=\"\/products\/15002-qu15002-spindle-lock-washer-for-jeep-and-scout\" target=\"_blank\"\u003eQU15002\u003c\/a\u003e Spindle Lock Washer \u003cbr\u003e\u003ca href=\"\/products\/15005-qu15005-6-bolt-front-hub-gasket\" target=\"_blank\"\u003eQU15005\u003c\/a\u003e 6 Bolt Hub Gasket \u003cbr\u003e\u003ca href=\"\/products\/881011-qt1011-2-1-16-hex-front-spindle-nut-socket-jeep-ihc\" target=\"_blank\"\u003eQT1011\u003c\/a\u003e Thin-Wall 2-1\/16\" Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003e\u003cspan style=\"color: #ff6600\"\u003eMilitary MB and M38 Series including export models:\u003c\/span\u003e 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cspan style=\"color: #0000ff\"\u003eCJ Series up to CJ-8 Scrambler:\u003c\/span\u003e 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e\u003cspan style=\"color: #ff6600\"\u003eUtility Wagon and Truck:\u003c\/span\u003e 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003e\u003cspan style=\"color: #0000ff\"\u003eFC150:\u003c\/span\u003e 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003e\u003cspan style=\"color: #ff6600\"\u003eJ-Series with 1-1\/2\" Spindle Threads:\u003c\/span\u003e 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e \u003cbr\u003e\u003cspan style=\"color: #0000ff\"\u003eScout:\u003c\/span\u003e 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656629493837,"sku":"15001","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15001_2__07487_8190__40188.1707842717.1280.1280.jpg?v=1742493438"},{"product_id":"15002-qu15002-spindle-lock-washer-for-jeep-and-scout","title":"QU15002 Spindle Lock Washer for Jeep and Scout","description":"\u003cp\u003e\u003cstrong\u003eQU15002 Spindle Lock Washer\u003c\/strong\u003e for Jeep and Scout with 1-5\/8\" Spindle threads. Fits Jeep civilian and military Dana 25, Dana 27, Dana 30 from 1941-1986 Also fits most 1954-1971 Jeep Dana 44 Front Axles plus Dana 25 rear axles in WWII military MA, MB, and GPW. Also found on International Scout from 1961 to 1980. Supply Limited.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eAfter Spindle Nut Adjustment\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eMatching Parts for 1972.5-1979 Ram SRW\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAfter Spindle Nut Adjustment \u003c\/strong\u003e\u003cbr\u003eAfter your spindle nuts are properly adjusted, bend a portion of QU15002 Lock Washer over one of the flats on the outer Spindle Nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU15002 Spindle Lock Washer:\u003cbr\u003e\u003ca href=\"\/products\/sku-xvj110-1977-1978-5-jeep-cj-7-dana-30-front-wheel-hub-exploded-view\"\u003eXVJ110\u003c\/a\u003e 1977-1978.5 Jeep CJ7 Dana 30 Front Wheel Hub Exploded View\u003cbr\u003e\u003ca href=\"\/products\/15000-qu15000-spindle-flat-washer-for-jeep-scout-with-1-5-8-spindle-thread\" target=\"_blank\"\u003eQU15000\u003c\/a\u003e Spindle Thrust Washer\u003cbr\u003e\u003ca href=\"\/products\/4669-qk4669-hex-spindle-nut-kit-for-jeeps-and-ihc-scouts\" target=\"_blank\"\u003eQK4669\u003c\/a\u003e Spindle Nut and Washer Kit\u003cbr\u003e\u003ca href=\"\/products\/15005-qu15005-6-bolt-front-hub-gasket\" target=\"_blank\"\u003eQU15005\u003c\/a\u003e 6 Bolt Hub Gasket \u003cbr\u003e\u003ca href=\"\/products\/881011-qt1011-2-1-16-hex-front-spindle-nut-socket-jeep-ihc\" target=\"_blank\"\u003eQT1011\u003c\/a\u003e Thin-Wall 2-1\/16\" Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for 1972.5-1979 Ram SRW\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU15002 in 1972.5-1979 Dodge and Ram Dana SRW Rear Axle Applications:\u003cbr\u003e\u003ca href=\"\/products\/50413-qu50413-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50413\u003c\/a\u003e Inner Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50411-qu50411-timken-taper-wheel-bearing-cup-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50411\u003c\/a\u003e Outer Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/40450-qu40450-rear-wheel-seal-1972-2002-dodge-dana-full-floating-rear-axles\" target=\"_blank\"\u003eQU40450\u003c\/a\u003e Rear Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Steel Axle Shaft Flange Gasket\u003cbr\u003e\u003ca href=\"\/products\/50414-qu50414-timken-inner-wheel-bearing\" target=\"_blank\"\u003eQU50414\u003c\/a\u003e Inner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/40577-qu40577-7-16-id-tapered-lock-wedge-or-cone-for-dana-rear-axles\" target=\"_blank\"\u003eQU40577\u003c\/a\u003e Tapered Locking Bushing Cone for Axle Shaft Drive Studs\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex Synthetic Grease\u003cbr\u003e\u003ca href=\"\/products\/40367-qu40367-dana-60-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU40367\u003c\/a\u003e Dana 70 Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/42030-qu42030-reusable-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU42030\u003c\/a\u003e Dana 70 Reusable Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for 1977-1979.5 Dodge 3\/4 Ton\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU15002 in 1977-1979.5 Dodge 3\/4 ton truck Dana 60 Rear Axle Applications:\u003cbr\u003e\u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/90001-qu90001-flanged-wheel-seal-for-many-dodge-ford-front-rear-axles\" target=\"_blank\"\u003eQU90001\u003c\/a\u003e Rear Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/40078-qu40078-dana-axle-shaft-gasket-for-dana-60-70-80-rear-axles\" target=\"_blank\"\u003eQU40078\u003c\/a\u003e Steel Axle Shaft Flange Gasket\u003cbr\u003e\u003ca href=\"\/products\/20017-tk20017-2-id-spindle-nut-lock-washer-ford-dana-60-d70-rear-axles\" target=\"_blank\"\u003eTK20017\u003c\/a\u003e Spindle Nut Lock Washer for 1969.5-1979 Ford\u003cbr\u003e\u003ca href=\"\/products\/20018-qu20018-rear-hub-2-9-16-rounded-hex-spindle-lock-nut\" target=\"_blank\"\u003eQU20018\u003c\/a\u003e Spindle Nut for 1969.5-1979 Ford (uses 2)\u003cbr\u003e\u003ca href=\"\/products\/50411-qu50411-timken-taper-wheel-bearing-cup-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50411\u003c\/a\u003e Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/40077-qu40077-dana-rear-locking-spindle-nut\" target=\"_blank\"\u003eQU40077\u003c\/a\u003e Spindle Lock Nut for 1979.5-1993 Dodge\u003cbr\u003e\u003ca href=\"\/products\/40089-qu40089-orange-rear-axle-spindle-nut-lock-wedge-for-dodge-ford\" target=\"_blank\"\u003eQU40089\u003c\/a\u003e Spindle Nut Lock Wedge for 1979.5-1993 Dodge\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex Synthetic Grease\u003cbr\u003e\u003ca href=\"\/products\/40367-qu40367-dana-60-dana-70-differential-cover-gasket\" target=\"_blank\"\u003eQU40367\u003c\/a\u003e Dana 60\/70 Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/42029-qu42029-dana-50-60-high-performance-reusable-diff-cover-gasket\" target=\"_blank\"\u003eQU42029\u003c\/a\u003e Dana 60 Reusable Differential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/1502-qt1502-front-and-rear-wheel-seal-installer-for-ford-and-dodge\" target=\"_blank\"\u003eQT1502\u003c\/a\u003e Wheel Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/881009-qt1009i-2-9-16-rounded-hex-rear-spindle-nut-socket-1-2-drive-import\" target=\"_blank\"\u003eQT1009i\u003c\/a\u003e Spindle Nut Socket for 1979.5-2002\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500\u003c\/a\u003e Wheel Bearing Packer\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eJeep and Scout with 1-1\/2\" Spindle Threads\u003cbr\u003e\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656629985357,"sku":"15002","price":4.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15002_2__08379_8191__56417.1707842737.1280.1280.jpg?v=1742493455"},{"product_id":"15005-qu15005-6-bolt-front-hub-gasket","title":"QU15005 6 Bolt Front Hub Gasket","description":"\u003cp\u003e\u003cstrong\u003e QU15005 6 Bolt Front Hub Gasket\u003c\/strong\u003e fits most 1941-1971 Jeeps with 6 bolt external mount hubs and 1972-1980 Jeep CJ-5, CJ-6, CJ-7. 3-7\/16\" Bolt Circle. Also fits IHC Scout 1960-1970, 1971-1980 Scout II, Scout Terra, and Scout Traveler (Does not fit Jeep J20, J4800, or M715 series.)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e QU15005 fits Jeep and International Scout models with 3-7\/16\" bolt circle, 6 bolt front hub mounting faces that use 3\/8\" diameter studs or bolts to attach the hub drive flange to the wheel hub.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/15000-qu15000-spindle-flat-washer-for-jeep-scout-with-1-5-8-spindle-thread\" target=\"_blank\"\u003eQU15000\u003c\/a\u003e Spindle Thrust Washer\u003cbr\u003e\u003ca href=\"\/products\/15002-qu15002-spindle-lock-washer-for-jeep-and-scout\" target=\"_blank\"\u003eQU15002\u003c\/a\u003e Spindle Lock Washer\u003cbr\u003e\u003ca href=\"\/products\/4669-qk4669-hex-spindle-nut-kit-for-jeeps-and-ihc-scouts\" target=\"_blank\"\u003eQK4669\u003c\/a\u003e Spindle Nut and Washer Kit\u003cbr\u003e\u003ca href=\"\/products\/881011-qt1011-2-1-16-hex-front-spindle-nut-socket-jeep-ihc\" target=\"_blank\"\u003eQT1011\u003c\/a\u003e Thin-Wall 2-1\/16\" Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for Warn M2 Hubs\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/sku-xv165-exploded-view-warn-m2-hub\" target=\"_blank\"\u003eXV165\u003c\/a\u003e Warn M2 Hub Exploded View\u003cbr\u003e\u003ca href=\"\/products\/40225-qu40225-snap-ring-for-ihc-scout-jeep-roxor-front-axles\" target=\"_blank\"\u003eQU40225\u003c\/a\u003e Snap Ring\u003cbr\u003e\u003ca href=\"\/products\/40292-qu40292-support-bearing-for-warn-hubs-dodge-front-axles\" target=\"_blank\"\u003eQU40292\u003c\/a\u003e Support Bearing\u003cbr\u003e\u003ca href=\"\/products\/95090-qu95090-1-4-20-thread-1-2-long-torx-screw\" target=\"_blank\"\u003eQU95090\u003c\/a\u003e 1\/2\" Long Torx Screw\u003cbr\u003e\u003ca href=\"\/products\/95091-qu95091-1-4-20-thread-1-2-long-hex-screw\" target=\"_blank\"\u003eQU95091\u003c\/a\u003e 1\/2\" Long Hex Screw\u003cbr\u003e\u003ca href=\"\/products\/15096-tk15096-warn-hub-pin\" target=\"_blank\"\u003eTK15096\u003c\/a\u003e Warn Hub Pin\u003cbr\u003e\u003ca href=\"\/products\/30075-qu30075-warn-hub-and-gm-np205-input-coupling-o-ring\" target=\"_blank\"\u003eQU30075\u003c\/a\u003e Warn Hub O-Ring\u003cbr\u003e\u003ca href=\"\/products\/15095-tk15095-vintage-hub-o-ring\" target=\"_blank\"\u003eTK15095\u003c\/a\u003e Hub O-Ring\u003cbr\u003e\u003ca href=\"\/products\/95088-qu95088-3-8-x-2-1-2-super-grade-8-bolt\" target=\"_blank\"\u003eQU95088\u003c\/a\u003e 3\/8\" x 2-1\/2\" Super Grade 8 Bolt\u003cbr\u003e\u003ca href=\"\/products\/95089-qu95089-3-8-x-3-super-grade-8-bolt\" target=\"_blank\"\u003eQU95089\u003c\/a\u003e 3\/8\" x 3\" Super Grade 8 Bolt\u003cbr\u003e\u003ca href=\"\/products\/4036-tk4036-hub-service-kit-for-warn-m1-and-m2-hubs-for-jeep-and-ihc\" target=\"_blank\"\u003eTK4036\u003c\/a\u003e Hub Service Kit\u003cbr\u003e\u003ca href=\"\/products\/9214-qt9214-t30-torx-bit\" target=\"_blank\"\u003eQT9214\u003c\/a\u003e T30 Torx Bit\u003cbr\u003e\u003ca href=\"\/products\/9215-qt9215-5-32-hex-bit\" target=\"_blank\"\u003eQT9215\u003c\/a\u003e 5\/32\" Hex Bit\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e Scout: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003e Scout II, Scout Terra, Scout Traveler: 1971, 1872, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eWith 6-Bolt External Mount Hubs: 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e CJ's (CJ5, CJ6, CJ7): 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 \u003cbr\u003e\u003cem\u003e*Does not fit Jeep J20, J4800, or M715 series\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep with Warn M2 Hubs:\u003c\/strong\u003e\u003cbr\u003eCJ2A: 1945, 1946, 1947, 1948, 1949\u003cbr\u003eCJ3A: 1949, 1950, 1951, 1952, 1953\u003cbr\u003eCJ3B: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964\u003cbr\u003eCJ5: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e CJ6: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e C101 Jeepster Commando: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e C104 Commando: 1972, 1973\u003cbr\u003eUtility Wagon: 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964\u003cbr\u003e Utility Truck: 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964\u003cbr\u003eFC150, FC170: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eWagoneer:  1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003e Gladiator Truck: 1963,  1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1972\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41656630575181,"sku":"15005","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15005_1200_clean__49312_11999__01509.1707842827.1280.1280.jpg?v=1742493514"},{"product_id":"15027-qu15027-1942-1973-premium-lockout-hub-set-for-jeep-and-scout","title":"QU15027 1942-1973 Premium Lockout Hub Set for Jeep and Scout","description":"\u003cp\u003e\u003cstrong\u003eQU15027 Premium Lockout Hub Set\u003c\/strong\u003e for 1942-1973 Jeep and 1961-1970 Scout with1-1\/8\" 10 spline axle shafts and 3-7\/16\" hub face bolt circle.\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656634343501,"sku":"15027","price":430.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15027_1200_clean__75772_11123__35842.1707843232.1280.1280.jpg?v=1742493862"},{"product_id":"4617-qk4617-dana-axle-small-knuckle-bearing-and-shim-kit","title":"QK4617 Dana Axle Small Knuckle Bearing and Shim Kit","description":"\u003cp\u003e\u003cstrong\u003eQK4617 Dana Closed Knuckle and 1966-1971 Ford Open Knuckle Dana Axle Small Knuckle Bearing and Shim Kit\u003c\/strong\u003e includes 4 Timken® \u003ca href=\"\/products\/8950628-qu50628-king-pin-or-knuckle-bearing-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU50628\u003c\/a\u003e Knuckle Bearings, 4 Timken® \u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e Knuckle Bearing Cups, and 2 \u003ca href=\"\/products\/4939-tka4939-11-piece-premium-steering-knuckle-shim-kit-dana-25-44-axles\" target=\"_blank\"\u003eTKA4939\u003c\/a\u003e Premium Torque King® Rectangular Knuckle Shim Sets. Fits Chevy, Ford, GMC, International Scout, Jeep, and Studebaker Dana Spicer 25, 27, 30, and standard 44 closed knuckle front drive axles all of which use \u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e 8 bolt knuckle seal. QK4617 Also fits 1966-1971 Ford Bronco Dana 30 and F-100 Dana 44 Open Knuckle Front Axles. \u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e Drivers Side Upper King Pin Shims for vehicles with combination drivers side steering arm\/king pin with a trapezoid bolt pattern.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eDodge and IHC Truck Upper Bushings\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eDoes Not Fit Dana 44HD Axles\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eFord Open Knuckle Dampeners and Seals\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003ePack Bearings\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eLubrication 1\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eLubrication 2\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eShims and Preload 1\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eShims and Preload 2\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note10\"\u003e\u003cstrong\u003eBearing Cup Installer\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note11\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eQK4617 Small Knuckle Bearing and Shim Kit Includes:\u003cbr\u003e(2) \u003ca href=\"\/products\/4939-tka4939-11-piece-premium-steering-knuckle-shim-kit-dana-25-44-axles\" target=\"_blank\"\u003eTKA4939\u003c\/a\u003e Premium Knuckle Shim Kit\u003cbr\u003e(1) \u003ca href=\"\/products\/50784-tk50784-small-knuckle-king-pin-bearing-only-kit\" target=\"_blank\"\u003eTK50784\u003c\/a\u003e King Pin Knuckle Bearing Kit\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge and IHC Truck Upper Bushings \u003c\/strong\u003e\u003cbr\u003e1960-1971 Dodge and IHC 4x4 trucks with standard Dana 44 Closed Knuckle Front Axles use either Keyed (1960-1964\/1965) or Splined 1964\/1965-1971 Bronze Upper Bushings instead of Bearings. The Bronze Bushings are more resistant to impact damage. Both GM and Jeep also had part numbers for the Keyed Upper Bushing, but we have not found a production civilian model that used them.\u003cbr\u003eDodge and IHC with bronze splined upper king pin bushings, also see: \u003ca href=\"\/products\/40569-qu40569-bronze-upper-knuckle-bushing-with-internal-splines\" target=\"_blank\"\u003eQU40569\u003c\/a\u003e.\u003cbr\u003eDodge and IHC with bronze keyed upper king pin bushings, also see: \u003ca href=\"\/products\/40564-qu40564-bronze-upper-knuckle-bushing-with-key-slot\" target=\"_blank\"\u003eQU40564\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDoes Not Fit Dana 44HD Axles\u003c\/strong\u003e\u003cbr\u003eIf you have a Dana 44HD front axle with 12 bolt ball seals, see \u003ca href=\"\/products\/4616-qk4616-dana-44-60-70-large-closed-knuckle-bearing-and-bushing-kit\" target=\"_blank\"\u003eQK4616\u003c\/a\u003e and \u003ca href=\"\/products\/4618-qk4618-dana-44hd-dana-60-dana-70-large-closed-knuckle-bearing-kit\" target=\"_blank\"\u003eQK4618\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFord Open Knuckle Dampeners and Seals\u003c\/strong\u003e\u003cbr\u003e1966-1971 Ford Axles with King Pins may have issues with \"Death Wobble\" an uncontrollable shaking of the steering wheel unless \u003ca href=\"\/products\/20096-qu20096-king-pin-dampener-and-seal-plate-kit\" target=\"_blank\"\u003eQU20096\u003c\/a\u003e 3-piece Dampener Kits are installed for the upper King Pin Bearings in addition to the preload shims. You will also need to use the seal caps from \u003ca href=\"\/products\/20096-qu20096-king-pin-dampener-and-seal-plate-kit\" target=\"_blank\"\u003eQU20096\u003c\/a\u003e Kits for for the lower King Bearing cups. Order 4 \u003ca href=\"\/products\/20096-qu20096-king-pin-dampener-and-seal-plate-kit\" target=\"_blank\"\u003eQU20096\u003c\/a\u003e Kits per vehicle, but only use the dampener Bushing and Washer for the upper King Pins. Ford Open Knuckle Axles also require a \u003ca href=\"\/products\/20231-qu20231-king-pin-bearing-seal-for-1966-1971-ford-bronco-and-f100\" target=\"_blank\"\u003eQU20231\u003c\/a\u003e Seal for each King Pin Bearing (4 Total).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePack Bearings\u003c\/strong\u003e\u003cbr\u003eYou must pack your knuckle bearings with a suitable lubricant such as \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex® Protection ES Synthetic Grease before installation to provide initial lubrication.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubrication 1\u003c\/strong\u003e\u003cbr\u003eIn service, the knuckle bearings are designed to be bathed in a semi-liquid Closed Knuckle Lubricant inside the enclosed steering knuckle. If your 4x4 has lockout hubs, you should drive the vehicle with the hubs engaged at least once monthly so the axle shaft will fling lube to the upper knuckle bearing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubrication 2\u003c\/strong\u003e\u003cbr\u003eWe recommend our \u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\"\u003eClosed Knuckle Lube\u003c\/a\u003e for lubricating your Knuckle Bearings and Axle U-Joints. You can also use whatever lubricant specified in your original Operators Manual. If the vehicle manufacturer recommended steering knuckle lubricant is not available, Dana recommends SAE 140 grade gear lubricant for the knuckles. However, straight gear lube will almost always seep past the knuckle seal which covers the inside of the tires with oil, stains the garage floor and is unacceptable for current environmental standards. What I used to do, was mix SAE 250 weight gear lube with grease to make a semi-liquid lubricant which will flow into the bearings and u-joints, but not seep significantly past the seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eShims \u0026amp; Preload 1 \u003c\/strong\u003e\u003cbr\u003eShims are used between the King Pin Caps and Steering Knuckles to set your Knuckle Bearing\/Bushing turning preload. More shims decreases preload, less shims increases preload. King Pin Caps are shimmed to put the specified turning preload on the bearings. The amount of turning preload on varies by vehicle and year but the value is measured by a beam or dial type torque wrench (refer to the vehicle manufacturer Service Manual for your specific model specification or if a manual is unavailable, see Tech Note 7). Too loose can cause poor steering or \"Death Wobble\", too tight will lead to rapid bearing failure, broken parts, and possible steering loss.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eShims and Preload 2 \u003c\/strong\u003e\u003cbr\u003eThe Knuckle Bearings MUST be shimmed to provide correct knuckle turning preload. The critical measurement is the amount of force required to move the steering knuckle through the turning arc. The measurement is taken by attaching a beam or dial type torque wrench to one of the King Pin Cap screws. Do NOT install the knuckle seal, axle shaft, or tie rod before setting turning preload. Dana recommends the following turning preload for Dana 25, Dana 27, Dana 30, and standard Dana 44 steering knuckles:\u003cbr\u003e5-10 lbs. ft. for axles with tapered roller bearings top and bottom\u003cbr\u003e10-20 lbs. ft. for axles with upper bronze bushings\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note10\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 10:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBearing Cup Installer \u003c\/strong\u003e\u003cbr\u003eThe small size of the bearing cups makes them a bit tricky to install. I recommend you also order optional \u003ca href=\"\/products\/1819-qt1819-knuckle-bearing-cup-installer-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQT1819\u003c\/a\u003e Bearing Cup Installer separately.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note11\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 11:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for King Pin Bearing Kit:\u003cbr\u003e\u003ca href=\"\/products\/50784-tk50784-small-knuckle-king-pin-bearing-only-kit\" target=\"_blank\"\u003eTK50784\u003c\/a\u003e Knuckle Bearing Only Kit\u003cbr\u003e\u003ca href=\"\/products\/40564-qu40564-bronze-upper-knuckle-bushing-with-key-slot\" target=\"_blank\"\u003eQU40564\u003c\/a\u003e Keyed Upper King Pin Bushing for Early Dodge and IHC Dana 44\u003cbr\u003e\u003ca href=\"\/products\/40569-qu40569-bronze-upper-knuckle-bushing-with-internal-splines\" target=\"_blank\"\u003eQU40569\u003c\/a\u003e Splined Upper King Pin Bushing for Dodge and IHC Dana 44\u003cbr\u003e\u003ca href=\"\/products\/4939-tka4939-11-piece-premium-steering-knuckle-shim-kit-dana-25-44-axles\" target=\"_blank\"\u003eTKA4939\u003c\/a\u003e and \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e Rectangular Knuckle Shim Kits\u003cbr\u003e\u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e Trapezoid Knuckle Shim\u003cbr\u003e\u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e 8 Bolt Knuckle Ball Seal Kit Premium Genuine Dana\u003cbr\u003e\u003ca href=\"\/products\/40025-qu40025-axle-shaft-to-spindle-bushing-for-most-dana-closed-knuckles\" target=\"_blank\"\u003eQU40025\u003c\/a\u003e Spindle Bushing for Axle Shaft \u003cbr\u003e\u003ca href=\"\/products\/40507-qa40507-axle-u-joint-for-closed-knuckle-dana-25-27-30-and-44-axles\" target=\"_blank\"\u003eQA40507\u003c\/a\u003e Axle Universal Joint \u003cbr\u003e\u003ca href=\"\/products\/20096-qu20096-king-pin-dampener-and-seal-plate-kit\" target=\"_blank\"\u003eQU20096\u003c\/a\u003e King Pin Dampener Kit for Ford Open Knuckle Axles\u003cbr\u003e\u003ca href=\"\/products\/20231-qu20231-king-pin-bearing-seal-for-1966-1971-ford-bronco-and-f100\" target=\"_blank\"\u003eQU20231\u003c\/a\u003e Seal, For Ford Open Knuckle King Pin Bearings\u003cbr\u003e\u003ca href=\"\/products\/1819-qt1819-knuckle-bearing-cup-installer-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQT1819\u003c\/a\u003e Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\"\u003eClosed Knuckle Lube\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevrolet\/GMC:\u003cbr\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e\u003cbr\u003eK10\/K15, K20\/K25: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003eClosed Knuckle Dana 25\u003c\/strong\u003e:\u003cbr\u003eGPW military: 1942, 1943, 1944, 1945\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Standard Dana 44\u003c\/strong\u003e:\u003cbr\u003eF-100: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF-250 with standard Model 44 Front Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 30\u003c\/strong\u003e:\u003cbr\u003eBronco: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Standard Dana 44\u003c\/strong\u003e:\u003cbr\u003eF-100: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 27, 30, 44\u003c\/strong\u003e:\u003cbr\u003eScout: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e1\/2 ton and light 3\/4 ton: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep \u003cbr\u003eClosed Knuckle Dana 25, 27, 30, and 44:\u003c\/strong\u003e\u003cbr\u003eMilitary models MB, M38, M38A1, M170: 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957\u003cbr\u003eAll civilian Jeeps: 1945, 1946, 1947, 1948, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eJeep J-Series full size 4x4s: 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656723996749,"sku":"4617","price":294.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QK4617-1.png?v=1772640040"},{"product_id":"4649-qk4649-spindle-nut-washer-kit-for-1-5-8-spindle-threads","title":"QK4649 Spindle Nut \u0026 Washer Kit for 1-5\/8\" Spindle Threads","description":"\u003cp\u003e\u003cstrong\u003eQK4649 Spindle Nut and Washer Kit\u003c\/strong\u003e for Jeep, IHC Scout and Mahindra Roxor with 1-5\/8\" Spindle threads. Fits Jeep civilian and military Dana 25, Dana 27, Dana 30 from 1941-1986 Also fits most 1954-1971 Jeep Dana 44 Front Axles plus Dana 25 rear axles in WWII military MA, MB, and GPW. Also found on International Scout from 1961 to 1980. Also fits Mahindra Roxor front axles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eLocation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLocation\u003c\/strong\u003e\u003cbr\u003eQK4649 Spindle Nut and Washer is located between your outer wheel bearing and inner spindle nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/15002-qu15002-spindle-lock-washer-for-jeep-and-scout\" target=\"_blank\"\u003eQU15002\u003c\/a\u003e Spindle Lock Washer\u003cbr\u003e\u003ca href=\"\/products\/4669-qk4669-hex-spindle-nut-kit-for-jeeps-and-ihc-scouts\" target=\"_blank\"\u003eQK4669\u003c\/a\u003e Spindle Nut and Washer Kit\u003cbr\u003e\u003ca href=\"\/products\/15005-qu15005-6-bolt-front-hub-gasket\" target=\"_blank\"\u003eQU15005\u003c\/a\u003e 6 Bolt Hub Gasket\u003cbr\u003e\u003ca href=\"\/products\/881011-qt1011-2-1-16-hex-front-spindle-nut-socket-jeep-ihc\" target=\"_blank\"\u003eQT1011\u003c\/a\u003e Thin-Wall 2-1\/16\" Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003eJeep, IHC Scout, Mahindra Roxor with 1-5\/8\" Spindle Threads\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656752996429,"sku":"4649","price":15.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4649a_8_clean_1280__59079_25465__71330.1707849146.1280.1280.jpg?v=1778720994"},{"product_id":"4669-qk4669-hex-spindle-nut-kit-for-jeeps-and-ihc-scouts","title":"QK4669 Hex Spindle Nut Kit for Jeeps and IHC Scouts","description":"\u003cp\u003e\u003cstrong\u003eQK4669 Hex Spindle Nut Kit for Jeeps and IHC Scouts\u003c\/strong\u003e includes Inner Thrust Washer, Spindle Lock Washer, and two 2-1\/16\" OD Hex Spindle Nuts with 1-5\/8\" threads. Fits all Jeep CJ's through 1986 and most other civilian and military Jeep vehicles from 1941-1971 \u003cem\u003e(Does Not Fit 1967-1969 M715, M725, M726).\u003c\/em\u003e USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHex Nuts\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eThrust Washer\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eLock Washer\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eComponent Parts\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHex Nuts\u003c\/strong\u003e\u003cbr\u003eHex Nuts fit Jeep and Scout spindles with 1.625\" threads and measure 2-1\/16\" across the flats. Vehicles with Warn Lock-O-Matic Hubs use a special Warn supplied lock washer and outer nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eThrust Washer\u003c\/strong\u003e\u003cbr\u003eThe round Spindle Thrust Washer is located between your outer wheel bearing and inner spindle nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLock Washer\u003c\/strong\u003e\u003cbr\u003eAfter your spindle nuts are properly adjusted, bend a portion of the Lock Washer over one of the flats on the outer Spindle Nut.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eComponent Parts\u003c\/strong\u003e\u003cbr\u003eComponent Parts for QK4669 Spindle Nut Kit:\u003cbr\u003e\u003ca href=\"\/products\/15000-qu15000-spindle-flat-washer-for-jeep-scout-with-1-5-8-spindle-thread\" target=\"_blank\"\u003eQU15000\u003c\/a\u003e Spindle Thrust Washer\u003cbr\u003e\u003ca href=\"\/products\/15001-qu15001-front-1-5-8-thread-x-2-1-16-hex-spindle-nut-for-jeep-scout\" target=\"_blank\"\u003eQU15001\u003c\/a\u003e Spindle Nut (2) \u003cbr\u003e\u003ca href=\"\/products\/15002-qu15002-spindle-lock-washer-for-jeep-and-scout\" target=\"_blank\"\u003eQU15002\u003c\/a\u003e Spindle Lock Washer (limited supply)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QK4669 Spindle Nut Kit:\u003cbr\u003e\u003ca href=\"\/products\/sku-xv165-exploded-view-warn-m2-hub\" target=\"_blank\"\u003eXV165\u003c\/a\u003e Warn M2 Hub Exploded View\u003cbr\u003e\u003ca href=\"\/products\/4669-qk4669-hex-spindle-nut-kit-for-jeeps-and-ihc-scouts\"\u003eXVJ110\u003c\/a\u003e 1977-1978.5 Jeep CJ7 Dana 30 Front Wheel Hub Exploded View\u003cbr\u003e\u003ca href=\"\/products\/15005-qu15005-6-bolt-front-hub-gasket\" target=\"_blank\"\u003eQU15005\u003c\/a\u003e 6 Bolt Hub Gasket \u003cbr\u003e\u003ca href=\"\/products\/881011-qt1011-2-1-16-hex-front-spindle-nut-socket-jeep-ihc\" target=\"_blank\"\u003eQT1011\u003c\/a\u003e Thin-Wall 2-1\/16\" Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eMilitary MB and M38 Series including export models: 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eCJ Series up to CJ-8 Scrambler: 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eUtility Wagon and Truck: 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eFC150: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eJ-Series with 1-1\/2\" Spindle Threads: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003eScout: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656756437069,"sku":"4669","price":13.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4669_1_1200_clean__60424_14317__04676.1707849298.1280.1280.jpg?v=1742500202"},{"product_id":"40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles","title":"QU40002 Outer Pinion Bearing Slinger Dana 25, 27, 30, 44, 50, 53 Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40002 Outer Pinion Bearing Slinger\u003c\/strong\u003e for Dana-Spicer Model 25, Model 27, Model 30, Model 44, Model 50, and Model 53 Drive Axles (front or rear). QU40002 is a genuine Dana-Spicer flat, stamped steel Slinger that fits most Model 53 and smaller Spicer drive axles except for the Model 35. This Slinger is installed between the outer pinion bearing and pinion yoke. USA Made.\u003c\/p\u003e \u003cp\u003eInteractive Exploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010DT 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWhen to Replace\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWhen to Replace\u003c\/strong\u003e\u003cbr\u003eQU40002 should be replaced if it is bent, or if the pinion yoke has worn a groove in it.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 CJ Dana 30\u003cbr\u003e1986 CJ Dana 44\u003cbr\u003e1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Wrangler (YJ) Dana 30 and Dana 44\u003cbr\u003e1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Wrangler (TJ) Dana 30 and Dana 44\u003cbr\u003e1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Cherokee (XJ) Dana 30\u003cbr\u003e1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 Cherokee (XJ) Dana 44\u003cbr\u003e1993, 1994, 1995, 1996, 1997, 1998 Grand Cherokee (ZJ) Dana 30\u003cbr\u003e1999, 2000, 2001, 2002, 2003, 2004 Grand Cherokee (WJ) Dana 30\u003cbr\u003e1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 SJ and J Series Dana 44\u003cbr\u003e1986, 1987, 1988, 1989, 1990, 1991, 1992, -1993 Comanche (MJ) Dana 44\u003cbr\u003e1995, 1996, 1997 Dana 50IFS\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656928206925,"sku":"40002","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QU40002_1200__15438_18839__10986.1707860616.1280.1280.png?v=1742509527"},{"product_id":"40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles","title":"QU40009 OEM Dana Pinion Lock Nut for Dana 25, 27, 30, 44, 50, 53 Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40009 Dana Axle Pinion Lock Nut\u003c\/strong\u003e is a genuine Dana-Spicer original equipment replacement part that fits most Dana-Spicer Model 25, Model 27, Model 28, Model 30, Model 44, Model 50, and Model 53 front or rear drive axles. All metal nut is plated for corrosion protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eLocking Ability\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLocking Ability\u003c\/strong\u003e\u003cbr\u003eThese lock nuts are designed to be used only once. The locking ability of the nut is at its maximum on the initial installation. When setting up an axle, I use the old nut until the pinion depth and pinion preload is set. I then apply medium strength Threadlocker (see \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e, \u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003eS24200\u003c\/a\u003e) to a new nut and install it with a 1-1\/8\" socket. See my color illustrated Technical Manual \u003cem\u003e\u003ca href=\"\/products\/174400-tm4400-shop-manual-dana-axle-pinion-differential-bearing-service\" target=\"_blank\"\u003eTM4400\u003c\/a\u003e Pinion and Differential Bearing Service on Dana-Spicer Monobeam Axles\u003c\/em\u003e or your Factory Shop Manual for the correct torque or tightening procedure.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eInteractive Exploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010DT 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/torqueking.com\/products\/441975-d441975-drive-gear\"\u003eD441975\u003c\/a\u003e D30, D44 Ring Gear Bolts, Pinion Nut, and Pinion Washer Set\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Washer, \u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311\u003c\/a\u003e Dana 44 Bearing Kit (most 1993 and prior)\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Dana 44 Front Axle Diff Bearing and Seal Kit\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #800080;\"\u003eAll Blazer, Jimmy, 1\/2 Ton, and 3\/4 Ton Dana 44 Front Axles:\u003c\/span\u003e 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge\/Plymouth:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #003366;\"\u003eAll Ramcharger, Trailduster, W100, W150, W200, W250 with Dana 44 Front Axle:\u003c\/span\u003e 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cspan style=\"color: #008080;\"\u003eRam 1500:\u003c\/span\u003e 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003eRam 2500 Dana 44 Front Axles:\u003c\/span\u003e 1994, 1995, 1996, 1997\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #993300;\"\u003eAll Dana 44, Dana 44IFS Front Axles Bronco, F100, F150, F250:\u003c\/span\u003e 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003e\u003cspan style=\"color: #808000;\"\u003eFord Bronco Dana 30 Front Axle:\u003c\/span\u003e 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cspan style=\"color: #003366;\"\u003eBronco II, Ranger with Dana 28 IFS Front Axle:\u003c\/span\u003e 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003e\u003cspan style=\"color: #ff00ff;\"\u003eF250 with Dana 50IFS Front Axle:\u003c\/span\u003e 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003e\u003cspan style=\"color: #008000;\"\u003eF350 with Dana 50 Front Axle:\u003c\/span\u003e 1980, 1981, 1982, 1983, 1984, 1985\u003cbr\u003e\u003cspan style=\"color: #333399;\"\u003eFord Super Duty F250, F350 with Dana 50 Axle:\u003c\/span\u003e 1999, 2000, 2001, 2002\u003cbr\u003e\u003cspan style=\"color: #ff6600;\"\u003eExcursion:\u003c\/span\u003e 2000, 2001, 2002\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #800080;\"\u003eScout Front and Rear Axles:\u003c\/span\u003e 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003e\u003cspan style=\"color: #800000;\"\u003eAll Dana 44 Front and Rear Axles in 1\/2 ton and 3\/4 ton trucks:\u003c\/span\u003e 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003eAll Civilian and 1\/4 ton Military Dana 25, 27, 30, 44 Front Axles:\u003c\/span\u003e 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003cbr\u003e\u003cspan style=\"color: #008080;\"\u003eAll Dana 25, 27, 30, 44, and 53 Rear Axles:\u003c\/span\u003e 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003cbr\u003e\u003cspan style=\"color: #ff6600;\"\u003eSome Dana 30 and Dana 44 Axles:\u003c\/span\u003e 1999-up\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656931647565,"sku":"40009","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40009clean__80733_10535__96563.1707860672.1280.1280.jpg?v=1742509616"},{"product_id":"40010-qu40010-dana-axle-pinion-washer","title":"QU40010 Dana Axle Pinion Washer","description":"\u003cp\u003e\u003cstrong\u003eQU40010 Dana Axle Pinion Washer\u003c\/strong\u003e is a genuine Dana-Spicer flat washer that fits between the pinion nut and pinion yoke on most Dana 25, Dana 27, Dana 30, Dana 44, Dana 50, and Dana 53 Drive Axles.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eWhen to Replace\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWhen to Replace\u003c\/strong\u003e\u003cbr\u003eReplace your Pinion Washer if it is bent, gouged, or damaged in any way.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eInteractive Exploded View \u003ca href=\"\/products\/sku-xv1010-exploded-view-1995-1997-ford-f250-dana-50ifs-front-axle\" target=\"_blank\"\u003eXV1010 1995, 1996, 1997 Ford F250 Dana 50IFS Axle\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576\u003c\/a\u003e Dana 44 Front Axle Diff Bearing and Seal Kit\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCJ Dana 30: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003eCJ Dana 44: 1986\u003cbr\u003eWrangler (YJ) Dana 30 and Dana 44: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995\u003cbr\u003eWrangler (TJ) Dana 30 and Dana 44: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006\u003cbr\u003eCherokee (XJ) Dana 30: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001\u003cbr\u003eCherokee (XJ) Dana 44: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003cbr\u003eGrand Cherokee (ZJ) Dana 30: 1993, 1994, 1995, 1996, 1997, 1998\u003cbr\u003eGrand Cherokee (WJ) Dana 30: 1999, 2000, 2001, 2002, 2003, 2004\u003cbr\u003eSJ and J Series Dana 44: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eComanche (MJ) Dana 44: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003e\u003c\/strong\u003eF150, F250, Bronco, Dana 44: 1978, 1979\u003cbr\u003eDana 50IFS: 1995, 1996, 1997\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41656932008013,"sku":"40010","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40010-clean-1280__29837.1728499041.1280.1280.jpg?v=1742509633"},{"product_id":"40021-qu40021-0-030-thick-diff-side-bearing-shim-for-jeep-dana-44-front-axles","title":"QU40021 0.030 Thick Diff Side Bearing Shim for Jeep Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40021 0.030 Thick Diff Side Bearing Shim\u003c\/strong\u003e for Jeep Dana 44 front axles.\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41656933843021,"sku":"40021","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40021__25320_8996__71115.1707860712.1280.1280.jpg?v=1742509720"},{"product_id":"40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger","title":"QU40028 Dana 44 and Dana 50 Inner Pinion Bearing Slinger","description":"\u003cp\u003e\u003cstrong\u003e QU40028 Dana 44 and Dana 50 Inner Pinion Bearing Slinger\u003c\/strong\u003e is a 4-\/18\" diameter, genuine Dana original equipment, flat steel, Oil Slinger primarily found on front axle applications. QU40028 fits between your Dana 44 or Dana 50IFS axle's inner pinion bearing and pinion head. The large diameter of the slinger picks up and flings oil into the axle housing oil channel for better pinion bearing lubrication. Approximate thickness is 0.030\". USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eDana 44\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eDana 50IFS\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eWhen Installing\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDana 44\u003c\/strong\u003e\u003cbr\u003e QU40028 is not used on all Dana 44 axles. It is primarily found on front axle applications, but it should not be used unless your axle was originally equipped with one.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDana 50IFS\u003c\/strong\u003e\u003cbr\u003e For the Ford Dana 50IFS front axle, QU40028 was used on 1980-1987 axles have QU40028 Slinger under the pinion bearing. 1989-1991 axles used a 4-1\/8\" diameter, selective fit slinger\/shim between the inner pinion bearing and pinion head. 1992-1997 axles have a 2-1\/4\" diameter selective fit shim that goes in the same location. \u003ca href=\"\/products\/40576-qu40576-dana-50ifs-front-axle-pinion-differential-shim-kit-for-ford\" target=\"_blank\"\u003eQU40576 \u003c\/a\u003eDiff and Pinion Shim Kit works on all 1980-1997 Dana 50 IFS front axles. It includes 1992-1997 type, 2-1\/4\" diameter, selective fit, inner pinion shims. The 4-1\/8\" diameter slinger has been eliminated by Dana engineers, but you still need to use \u003ca href=\"\/products\/40527-qu40527-inner-pinion-oil-baffle-for-dana-50-front-axles\" target=\"_blank\"\u003eQU40527 \u003c\/a\u003ebaffle under the inner pinion bearing cup. \u003ca href=\"\/products\/40527-qu40527-inner-pinion-oil-baffle-for-dana-50-front-axles\" target=\"_blank\"\u003eQU40527 \u003c\/a\u003ebaffle is NOT included with this Kit and it must be ordered separately.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eWhen Installing\u003c\/strong\u003e\u003cbr\u003e Since QU40028 fits between the inner pinion bearing and pinion head, you MUST include the thickness of the Slinger when calculating your pinion depth shim pack. Typically axles that use this Slinger will have deeper inner pinion bearing bores compared to axles that do not use the Slinger.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009 \u003c\/a\u003ePinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010 \u003c\/a\u003ePinion Washer \u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002 \u003c\/a\u003eOuter Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311 \u003c\/a\u003eComplete Differential and Pinion Shim Kit \u003cbr\u003e\u003ca href=\"\/products\/40209-qu40209-dana-44-ring-gear-bolt\" target=\"_blank\"\u003eQU40209 \u003c\/a\u003eRing Gear Bolt \u003cbr\u003e\u003ca href=\"\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle\" target=\"_blank\"\u003eQU40448 \u003c\/a\u003eDana 44 Inner Pinion Cup Oil Baffle\u003cbr\u003e\u003ca href=\"\/products\/40527-qu40527-inner-pinion-oil-baffle-for-dana-50-front-axles\" target=\"_blank\"\u003eQU40527 \u003c\/a\u003eDana 50 Inner Pinion Cup Oil Baffle\u003cbr\u003e\u003ca href=\"\/products\/50535-qu50535-dana-25-dana-44-inner-timken-pinion-bearing-cup\" target=\"_blank\"\u003eQU50535 \u003c\/a\u003eInner Pinion Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50536-qu50536-dana-25-dana-44-inner-timken-pinion-bearing\" target=\"_blank\"\u003eQU50536 \u003c\/a\u003eDana 44 Inner Pinion Bearing\u003cbr\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003eQU40214 \u003c\/a\u003eDifferential Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576 \u003c\/a\u003eDana 44 Front Axle Diff Bearing and Seal Kit (most 1967-1993 beam type front axles) \u003cbr\u003eInner Axle Seals will vary by year\/model, see axle specific main page below \u003cbr\u003e\u003ca href=\"\/products\/134885-tk4885-premium-dana-50-differential-pinion-timken-bearing-only-kit\" target=\"_blank\"\u003eTK4885 \u003c\/a\u003eDana 50 Diff and Pinion Bearing only Kit\u003cbr\u003e\u003ca href=\"\/products\/50581-qu50581-dana-50-differential-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50581 \u003c\/a\u003eDana 50 Differential\/Pinion Bearing and Seal Kit\u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044 \u003c\/a\u003eInner Pinion Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812 \u003c\/a\u003eOuter Pinion Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1818-qt1818-taper-bearing-cup-installer\" target=\"_blank\"\u003eQT1818 \u003c\/a\u003eInner Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1097-qt1097-differential-master-bearings-for-dana-44-axles\" target=\"_blank\"\u003eQT1097 \u003c\/a\u003eDana 44 Differential Master Bearings\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032 \u003c\/a\u003eDifferential Case Spreader\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eDana 44: 1980, 1981, 1982, 1983, 1984, 1985, 1986,1987 Dana 50IFS\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656939282509,"sku":"40028","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40028__42012_9013__57554.1707860888.1280.1280.jpg?v=1742509844"},{"product_id":"40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles","title":"QU40055 Inner Axle Seal for GM 10 Bolt and Many Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQU40055 4x4 Inner Axle Shaft Oil Seal\u003c\/strong\u003e fits a number of 1957 to 1978 Dana 44 front drive axles AND 1977-1991 GM 10 Bolt front axles. QU40055 is an original equipment quality Seal made by the primary supplier of axle shaft seals of that era to Dana and GM. Sold individually, order 2 per axle.\u003cbr\u003e\u003cbr\u003e Also See \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e and \u003ca href=\"\/products\/4872-qk4872-dana-44-axle-seal-kit-with-adjustable-depth-axle-seal-tool-set\" target=\"_blank\"\u003eQK4872\u003c\/a\u003e Seal\/Installation Tool Kits\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUnitized Seal\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eRemoval required\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003ePrep\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eRecommended Install Tools\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003eLube\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003eMatching Parts\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUnitized Seal\u003c\/strong\u003e\u003cbr\u003eQU40055 is a unitized seal that combines the seal and axle shaft guide into one part. It is an exact replacement part for the seal GM used in most 1977-1991 GM 10 Bolt front axles and many 1967 to 1978 Dana 44 axles. It is also the replacement part for a number of 1957 to 1972 Dana 44 axles that had \u003ca href=\"\/products\/42015-qu42015-inner-front-axle-shaft-seal-for-dana-44-and-dana-60\" target=\"_blank\"\u003eQU42015\u003c\/a\u003e seal and a separate sheet metal guide.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRemoval Required\u003c\/strong\u003e\u003cbr\u003eLike almost all solid beam axle shaft seals, QU40055 Seals are pressed in the inboard ends of the axle tubes next to the differential. It is impossible to replace the seals from the outside! You must remove the hubs, axle shafts, and differential to replace these seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePrep\u003c\/strong\u003e\u003cbr\u003eOnce the axle is disassembled, the old seals can be easily removed with our \u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Seal Remover Tool Sets or other suitable tool such as a length of sturdy pipe that will fit inside the axle tube. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRecommended Install Tools\u003c\/strong\u003e\u003cbr\u003eInstalling Inner Axle Seal without damaging them can be quite difficult without special installation tools. We make two installers for QU40055 Seal. \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e is a Dana 44 specific Installer that installs your new seals to the precise factory location. \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e is an adjustable depth Installer which works on both Dana 44 and GM 10 Bolt. Both Installers are designed to be used with a Press Screw and Thrust Plate. Dana 44 Axles need \u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Press Screw and \u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Thrust Plate. GM 10 Bolt Axles use \u003ca href=\"\/products\/1133-qta1133-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQTA1133\u003c\/a\u003e Press Screw and \u003ca href=\"\/products\/1186-qt1186-dana-30-and-gm-10-bolt-front-axle-seal-installer-thrust-plate\" target=\"_blank\"\u003eQT1186\u003c\/a\u003e Thrust Plate.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLube\u003c\/strong\u003e\u003cbr\u003eAfter the seals are installed, be sure to grease the lips to provide initial lubrication for the seal lip. Neglecting this step will usually cause the seal to fail the first time you use 4x4 mode. Do NOT grease the axle shafts as the grease will pick up crud as they are slid into the axle housing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40214-qu40214-dana-44-differential-cover-gasket\" target=\"_blank\"\u003eQU40214\u003c\/a\u003e Dana 44 Diff Cover Gasket\u003cbr\u003e\u003ca href=\"\/products\/82194-s82194-3-5oz-ultra-gray-rtv\" target=\"_blank\"\u003eS82194\u003c\/a\u003e Ultra Gray RTV Sealant \u003cbr\u003e\u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Inner Axle Seal Remover Tool Set\u003cbr\u003e\u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Fixed Depth Seal\/Installation Tool Kit for Dana 44\u003cbr\u003e\u003ca href=\"\/products\/4872-qk4872-dana-44-axle-seal-kit-with-adjustable-depth-axle-seal-tool-set\" target=\"_blank\"\u003eQK4872\u003c\/a\u003e Adjustable Depth Seal\/Installation Tool Kit for Dana 44\u003cbr\u003e\u003ca href=\"\/products\/664811-qk4811-front-axle-seal-installer-kit-for-1977-1991-gm-10-bolt-front-axle\" target=\"_blank\"\u003eQK4811\u003c\/a\u003e Seal\/Installation Tool Kit for GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e Fixed Depth Seal Installer for Dana 44\u003cbr\u003e\u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Adjustable Depth Seal Installer for Dana 44 and GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Press Screw for Dana 44 Axles\u003cbr\u003e\u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Thrust Plate for Dana 44 Axles\u003cbr\u003e\u003ca href=\"\/products\/1133-qta1133-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQTA1133\u003c\/a\u003e Press Screw for GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/1186-qt1186-dana-30-and-gm-10-bolt-front-axle-seal-installer-thrust-plate\" target=\"_blank\"\u003eQT1186\u003c\/a\u003e Thrust Plate GM 10 Bolt\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032\u003c\/a\u003e Diff Case Spreader\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eGM 10 Bolt Front Axles\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250 1967, 1968, 1969\u003cbr\u003eF-250 Dana 44 1978, 1979 \u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972.5, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIHC: \u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971.5, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656954224717,"sku":"40055","price":17.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40055__52876_9030__16837.1707861416.1280.1280.jpg?v=1742510282"},{"product_id":"15045-qu15045-front-wheel-seal-for-most-1962-5-1976-jeeps-with-5-bolt-wheels","title":"QU15045 Front Wheel Seal for Most 1962.5-1976 Jeeps with 5 Bolt Wheels","description":"\u003cp\u003e\u003cstrong\u003eQU15045 Front Wheel Seal for Most 1962.5-1976 Jeeps with 5 Bolt Wheels and Drum Front Brakes.\u003c\/strong\u003e QU15045 fits 1962.5-1976 Jeep CJ-5, CJ-6 Universal plus 1962.5-1973 Wagoneer, 1967-1973 Commando, 1962.5-1973 1\/2 ton truck, and 1962.5-1973 light-duty 3\/4 ton truck (5 bolt wheel). Seal Outside Diameter is 3\". QU15045 fits Dana 27( CJ, Commando, Wagoneer), Dana 30 CJ, Commando, Wagneer, and Dana 44 front axles (Jeep truck) with 5 bolt wheels for the year ranges listed. The matching inner wheel bearing number for these axles that use this seal will be either \u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448\u003c\/a\u003e  (all except Jeep SRW truck with GVW Code X or Y or DRW trucks. These heavy-duty modelsh use \u003ca href=\"\/products\/51090-qu51090-timken-wheel-or-differential-bearing\"\u003eQU51090)\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eWagoneer: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1973\u003cbr\u003eGladiator, J-Series Truck with up to 5,000 lb. GVW: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eCJ-3B: 1962.5, 1963, 1964\u003cbr\u003eCJ-5, CJ-5A, CJ-6, CJ-6A, M38A1: 1962.5, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eUtility Truck and Utility Wagon: 1962.5, 1963, 1964\u003cbr\u003eFC-150 and Single Rear Wheel FC-170: 1962.5, 1963, 1964, 1965\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41657088180301,"sku":"15045","price":9.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15045_1200_clean__81729_12183__89627.1707868782.1280.1280.jpg?v=1742515338"},{"product_id":"15062-qu15062-front-spindle-for-1973-jeep-j4800-dana-44-front-axles","title":"QU15062 Front Spindle for 1973 Jeep J4800 Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQU15062 Front Spindle\u003c\/strong\u003e for 1973 Jeep J4800 Dana 44 Closed Knuckle Front Axles. Also fits some 1968-1972 Jeep Trucks.\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41657096241229,"sku":"15062","price":109.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15062clean__77008_8228__38088.1707868993.1280.1280.jpg?v=1742515456"},{"product_id":"10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles","title":"QU10576 1-3\/4\" ID Bend Over Tab Lock Washer for 4x4 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e QU10576 Bend Over Tab Lock Washer for Dodge, IHC, and Jeep Dana 44 Front Axles and IHC Rear Axles with 1-3\/4\" Spindle Threads \u003c\/strong\u003efits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3\/4\" hex spindle nuts and external mount wheel hubs. Washer has two pre-bent tabs that fit over the inner spindle nut and 6 bend-over tabs for the outer nut. USA made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBefore Installing\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eTo Install\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSingle Use Part\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eIHC1100\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note5\"\u003eInternal Tab\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note6\"\u003e1.75” Thread\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note7\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003e At least one of the six bend over tabs will line up with a flat on the outer spindle nut after it is tightened. Bend that tab over the outer nut flat to lock the nut in place.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Install\u003c\/strong\u003e\u003cbr\u003e The pre-bent tabs on QU10576 Washer go over a flat on the inner nut instead of a corner. This may differ from most original lock washers (refer to photo) which have a compound bend on the tabs that will go over a corner of the nut. QU10576 washers are made so the inner tab ends can be altered to grip a nut corner if you require more precise nut adjustment, but if you modify the washer it cannot be returned.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSingle Use Part\u003c\/strong\u003e\u003cbr\u003e QU10576 Spindle Lock Washer is designed as a \"Single Use\" part. \u003cstrong\u003eFor safety reasons, these parts are intended to be installed once and only once!\u003c\/strong\u003e The key slot tab, which keeps the washer from turning, can become fatigued and break off if the washer is reused or if the outer nut is over torqued. You must discard any \u003ca href=\"\/products\/9940037-qu40037-2-id-bent-tab-spindle-lock-washer-for-chevy-ford-and-gmc\" target=\"_blank\"\u003eQU40037\u003c\/a\u003e lock washer that is removed from the spindle for any reason and replace it with a new QU10576 Spindle Lock Washer.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIHC 1100\u003c\/strong\u003e\u003cbr\u003e This Lock Washer fits 1957-1974 Dodge, 1956-1975 International, and 1968-1973 Jeep trucks with front spindles that have 1-3\/4' threads and wheel hubs that are drilled and tapped with 6 3\/8\" holes in a 3-3\/4\" bolt circle to mount an external drive flange or lockout hub. QU10576 washer is NOT used on 1964-1975 International 1\/2 ton 4x4s or 1969-1974 Dodge W-100 4x4 trucks with 3-3\/8\" diameter internally splined wheel hubs. If you are looking for spindle lock washers for a IHC 1100 or Dodge W-100 with internally splined hubs see \u003ca href=\"\/products\/40060-qu40060-round-spindle-lock-washer\" target=\"_blank\"\u003eQU40060\u003c\/a\u003e Washer or \u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e Spindle Nut Set.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInternal Tab\u003c\/strong\u003e\u003cbr\u003e QU10576 Spindle Lock Washer has an internal tab that fits a 1\/4\" spindle key slot. It is not uncommon to find a spindle with slightly mashed threads at the outboard end which will reduce the slot width. If present, this condition will need to be fixed before you can install the lock washer.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1.750” Thread\u003c\/strong\u003e\u003cbr\u003e International and Jeep truck year and model application information is often difficult to precisely list due to the relatively low production numbers and the fact that both manufacturers often built special purpose vehicles for government and vocational applications. Regardless of the application information, if you have a front spindle with 1.750\" thread, QU10576 is the correct part for your 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/11164-qu11164-1-3-4-thread-spindle-hex-nut-for-dodge-ihc-jeep-dana-44\" target=\"_blank\"\u003eQU11164\u003c\/a\u003e Hex Spindle Nut with 1-3\/4\" Thread\u003cbr\u003e\u003ca href=\"\/products\/11165-qu11165-nla-inner-spindle-thrust-washer-dana-44-front-axles\" target=\"_blank\"\u003eQU11165\u003c\/a\u003e Spindle Thrust Washer (goes between outer wheel bearing and inner spindle nut)\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Gasket for Lockout Hub or Drive Flange\u003cbr\u003e\u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704\u003c\/a\u003e Front Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701\u003c\/a\u003e Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702\u003c\/a\u003e Wheel Bearing 1-3\/4\" ID\u003cbr\u003e\u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703\u003c\/a\u003e Wheel Bearing 1-13\/16\" ID \u003cbr\u003e\u003ca href=\"\/products\/4924-tk4924-early-front-wheel-bearing-seal-gasket-kit-for-dana-44-axles\" target=\"_blank\"\u003eTK4924\u003c\/a\u003e Front Wheel Bearing Kit 1957-1968 Dodge and 1956-1971.5 IHC\u003cbr\u003e\u003ca href=\"\/products\/4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late\" target=\"_blank\"\u003eTK4926\u003c\/a\u003e Front Wheel Bearing Kit 1969-1974 Dodge, IHC, and 1968-1973 Jeep\u003cbr\u003e\u003ca href=\"\/products\/881013-qt1013i-2-1-2-hex-thin-wall-spindle-nut-socket\" target=\"_blank\"\u003eQT1013i\u003c\/a\u003e 2-1\/2\" Hex Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e \u003cstrong\u003eDodge:\u003cbr\u003e\u003c\/strong\u003e W100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 \u003cbr\u003e W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e 100, 1100 1\/2 ton with 6 bolt, external mount hub with 3-3\/4\" bolt circle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963\u003cbr\u003e 120, 1200, 1210 3\/4 ton: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003e Dana 60 Rear Axle: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e J4000 with 8000 pound GVW including Camper Special: 1968, 1969, 1970\u003cbr\u003e J4800 with 8000 pound GVW including Camper Special: 1971, 1972, 1973\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657146867789,"sku":"10576","price":26.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu10576_1200_clean__89441_11592__82458.1707871362.1280.1280.jpg?v=1742517389"},{"product_id":"40849-qu40849-26-spline-1310-series-pinion-yoke","title":"QU40849 26 Spline 1310 Series Pinion Yoke","description":"\u003cp\u003e\u003cstrong\u003eQU40849 1310 Series Pinion Yoke for Dana 30, Dana 44, Dana 44IFS, and Dana 50IFS Axles\u003c\/strong\u003e is a USA Made, 26 spline replacement, u-bolt style pinion yoke for front or rear Dana axles from the 1960s to the 1980s. Use with \u003ca href=\"\/products\/40768-qu40768-1310-1330-driveshaft-u-bolt-kit\" target=\"_blank\"\u003eQU40768\u003c\/a\u003e U-Bolt Kit. Includes pinion slinger made to match \u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal. USA Made.\u003cbr\u003e \u003cbr\u003eAlso available while supplies last: \u003ca href=\"\/products\/5540849-qu40849u-used-26-spline-1310-series-pinion-yoke\" target=\"_blank\"\u003eQU40849U\u003c\/a\u003e Used Yoke \u003cbr\u003e \u003cbr\u003eAlso see \u003ca href=\"\/products\/40734-qu40734-s-b-type-1310-pinion-yoke-for-26-spline-pinion-shafts\" target=\"_blank\"\u003eQU40734\u003c\/a\u003e Strap and Bolt Style Yoke\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eU-Joint Specs\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eAnti-Seize, Threadlocker\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eBefore Installation\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003ePinion Bearing Preload\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eU-Joint Specs\u003c\/strong\u003e\u003cbr\u003eQU40849 takes external snap ring universal joints made to Spicer 1310 series dimensional specifications. The u-joint cup diameter is 1-1\/16\". The overall width is 3-7\/32\". For matching u-joints, see \u003ca href=\"\/products\/40720-tk40720-torque-king-premium-1310-driveshaft-u-joint\" target=\"_blank\"\u003eTK40720\u003c\/a\u003e Torque King® premium non-greaseable universal joint or \u003ca href=\"\/products\/40784-qu40784-greaseable-1310-series-universal-joint\" target=\"_blank\"\u003eQU40784\u003c\/a\u003e greaseable u-joint with metal backed seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAnti-Seize, Threadlocker\u003c\/strong\u003e\u003cbr\u003eTo keep the u-bolts from becoming rust frozen in your new pinion yoke, apply \u003ca href=\"\/products\/9975-s9975-5-grams-anti-seize-lubricant\" target=\"_blank\"\u003eS9975\u003c\/a\u003e Anti-Seize to the unthreaded portion of the legs. Put some \u003ca href=\"\/products\/9978-s9978-medium-strength-blue-242-threadlocker-1-gram\" target=\"_blank\"\u003eS9978\u003c\/a\u003e Threadlocker on the nut threads before installing the nuts on the u-bolts. This is such a minor step, but you will be glad you did!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installation\u003c\/strong\u003e\u003cbr\u003eGrease the seal lip and pinion yoke seal surface to provide initial lubrication prior to installing the yoke on the axle.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Pinion Bearing Preload\u003c\/strong\u003e\u003cbr\u003ePinion bearing preload on axles that would have had this pinion yoke as original equipment was set by shims.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eThe matching parts for QU40849 yoke are: \u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215\u003c\/a\u003e Pinion Seal\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009\u003c\/a\u003e Pinion Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010\u003c\/a\u003e Pinion Washer\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002\u003c\/a\u003e Outer Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40768-qu40768-1310-1330-driveshaft-u-bolt-kit\" target=\"_blank\"\u003eQU40768\u003c\/a\u003e U-Bolt Kit\u003cbr\u003e\u003ca href=\"\/products\/40720-tk40720-torque-king-premium-1310-driveshaft-u-joint\" target=\"_blank\"\u003eTK40720\u003c\/a\u003e or \u003ca href=\"\/products\/40784-qu40784-greaseable-1310-series-universal-joint\" target=\"_blank\"\u003eQU40784\u003c\/a\u003e U-Joints\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll K5 Blazer\/Jimmy, K10\/K15\/K1500 and K20\/K25\/K2500 with 26 spline Dana 44 Front Axle: 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eFront Dana 44 converted to 1310 U-Joint: 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eRamcharger, W100, and W200 with Spicer front CV driveshaft: 1974, 1975.5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco and F100\/F150 with Dana Front Axle and 1310 U-Joint: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF250 with Full Time Transfer Case and 1310 U-Joint: 1973, 1974, 1975, 1976, 1977, 1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003eScout with Dana 30 or Dana 44 Front and\/or Rear Axles and 1310 U-Joints: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Models with Dana 30 or Dana 44 Front and\/or Rear Axles and 1310 U-Joints: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41657344983117,"sku":"40849","price":154.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40849_side_1200_clean__15692_13073__57829.1707877811.1280.1280.jpg?v=1742522652"},{"product_id":"40607-qu40607-0-003-king-pin-shim","title":"QU40607 0.003\" KING PIN SHIM","description":"\u003cp\u003eRECTANGULAR 0.003\" THICK STEEL KING PIN OR STEERING KNUCKLE SHIM FOR DANA SPICER MODEL 25, 27, 30 AND 44 CLOSED KNUCKLE FRONT AXLES WITH 8 BOLT BALL SEALS\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657409536077,"sku":"40607","price":7.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40607_2__72977_9359__13045.1707880920.1280.1280.jpg?v=1742525153"},{"product_id":"40608-qu40608-0-005-king-pin-shim","title":"QU40608 0.005\" KING PIN SHIM","description":"\u003cp\u003eRECTANGULAR 0.005\" THICK STEEL KING PIN OR STEERING KNUCKLE SHIM FOR DANA SPICER MODEL 25, 27, 30 AND 44 CLOSED KNUCKLE FRONT AXLES WITH 8 BOLT BALL SEALS\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657409601613,"sku":"40608","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40608_2__50098_9360__19098.1707880941.1280.1280.jpg?v=1742525171"},{"product_id":"40609-qu40609-0-010-king-pin-shim","title":"QU40609 0.010\" KING PIN SHIM","description":"\u003cp\u003eRECTANGULAR 0.010\" THICK STEEL KING PIN OR STEERING KNUCKLE SHIM FOR DANA SPICER MODEL 25, 27, 30 AND 44 CLOSED KNUCKLE FRONT AXLES WITH 8 BOLT BALL SEALS\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657409667149,"sku":"40609","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40609_2__32366_9361__26466.1707880962.1280.1280.jpg?v=1742525189"},{"product_id":"40610-qu40610-0-030-king-pin-shim","title":"QU40610 0.030\" KING PIN SHIM","description":"\u003cp\u003eRECTANGULAR 0.030\" THICK STEEL KING PIN OR STEERING KNUCKLE SHIM FOR DANA SPICER MODEL 25, 27, 30 AND 44 CLOSED KNUCKLE FRONT AXLES WITH 8 BOLT BALL SEALS\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41657409699917,"sku":"40610","price":5.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40610_2__93445_9362__63285.1707880982.1280.1280.jpg?v=1742525207"},{"product_id":"40632-qu40632-dana-44-3-73-faster-ratio-empty-open-differential-case-kit","title":"QU40632 Dana 44 3.73 \u0026 faster Ratio Empty Open Differential Case Kit","description":"\u003cp\u003e\u003cstrong\u003eQU40632 New Dana 44 Fast Ratio Empty Open Differential Case Kit \u003c\/strong\u003eis a genuine Dana OEM empty differential case kit for Dana 44 front and rear axles with 3.73 or numerically lower gear ratios AND 30 spline axle shafts. These popular diffs were used by Dodge, Ford, GM, International, and Jeep and they will fit many front\/rear axle applications from 1967 to 1993. Kit includes the bare Diff, ring gear bolts, differential side bearing shims, and differential cover gasket. Assembled in U.S.A with domestic and imported parts. Non-stock, Special Order item.\u003c\/p\u003e\n\u003cp\u003eAlso see \u003ca href=\"\/products\/40633-qu40633-dana-44-fast-ratio-loaded-open-diff-case-assembly-kit\" target=\"_blank\"\u003eQU40633 \u003c\/a\u003eNew Dana 44 Loaded Diff Assembly Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits 2.72-3.73 Ratio Gear Sets\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eOne Time Use\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eTech Article \u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits 2.72-3.73 Ratio Gear Sets\u003c\/strong\u003e\u003cbr\u003eQU40632 Differentials fit most 1967-1993 Dana 44 axles with 2.72 to 3.73 ratio gear sets. If you need a differential for 3.92 to 5.89 ratio gear sets, see \u003ca href=\"\/products\/40634-qu40634-dana-44-3-92-up-slow-ratio-empty-open-diff-case-kit\" target=\"_blank\"\u003eQU40634\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eOne Time Use\u003c\/strong\u003e\u003cbr\u003eRing Gear Bolts are designed to be used once and only once.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTech Article\u003c\/strong\u003e\u003cbr\u003eFor more information about differences between early and late production Dana 44 differential cases including spline and bearing changes, see my \u003ca href=\"\/pages\/dana-44-differential-tech-1953-1993\"\u003e1953-1993 Dana 44 Diff Tech Page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eRelated items for QU40632 Dana 44 Diff:\u003cbr\u003e\u003ca href=\"\/products\/50576-qu50576-dana-44-differential-and-pinion-bearing-and-seal-kit\" target=\"_blank\"\u003eQU50576 \u003c\/a\u003eDifferential Bearing and Seal Kit for 1993 and older axles\u003cbr\u003e\u003ca href=\"\/products\/50537-qu50537-timken-dana-44-differential-side-bearing-cup\" target=\"_blank\"\u003eQU50537 \u003c\/a\u003eTimken® Differential Side Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50538-qu50538-timken-large-bore-dana-44-or-dana-53-diff-side-bearing\" target=\"_blank\"\u003eQU50538 \u003c\/a\u003eTimken® Differential Side Bearing\u003cbr\u003e\u003ca href=\"\/products\/40215-qu40215-dana-axle-pinion-seal\" target=\"_blank\"\u003eQU40215 \u003c\/a\u003ePinion Seal to 1993\u003cbr\u003e\u003ca href=\"\/products\/40028-qu40028-dana-44-and-dana-50-inner-pinion-bearing-slinger\" target=\"_blank\"\u003eQU40028 \u003c\/a\u003eInner Pinion Bearing Slinger\u003cbr\u003e\u003ca href=\"\/products\/40448-qu40448-dana-44-inner-pinion-bearing-oil-baffle\" target=\"_blank\"\u003eQU40448 \u003c\/a\u003eInner Pinion Oil Baffle\u003cbr\u003e\u003ca href=\"\/products\/40002-qu40002-outer-pinion-bearing-slinger-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40002 \u003c\/a\u003eOuter Pinion Slinger\u003cbr\u003e\u003ca href=\"\/products\/40311-qu40311-dana-44-differential-and-pinion-shim-kit\" target=\"_blank\"\u003eQU40311 \u003c\/a\u003eDiff and Pinion Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/40009-qu40009-oem-dana-pinion-lock-nut-for-dana-25-27-30-44-50-53-axles\" target=\"_blank\"\u003eQU40009 \u003c\/a\u003ePinion Lock Nut\u003cbr\u003e\u003ca href=\"\/products\/40010-qu40010-dana-axle-pinion-washer\" target=\"_blank\"\u003eQU40010 \u003c\/a\u003ePinion Yoke Washer\u003cbr\u003e\u003ca href=\"\/products\/90009-qu90009-universal-axle-service-pack\" target=\"_blank\"\u003eQU90009 \u003c\/a\u003eAxle Service Pack with Gear Marking Compound, Threadlocker, RTV Sealant, Brush\u003cbr\u003e\u003ca href=\"\/products\/1032-qt1032-differential-case-spreader-for-dana-25-to-dana-80-axles-usa-made\" target=\"_blank\"\u003eQT1032 \u003c\/a\u003eDifferential Housing Spreader\u003cbr\u003e\u003ca href=\"\/products\/1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings\" target=\"_blank\"\u003eQT1044 \u003c\/a\u003eInner Pinion Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1812-qt1812-inner-outer-bearing-cup-installer-for-chevy-dodge-ford-gmc-and-jeep-suvs-trucks\" target=\"_blank\"\u003eQT1812 \u003c\/a\u003eInner\/Outer Pinion Bearing Cup Installer \u003cbr\u003e\u003ca href=\"\/products\/1097-qt1097-differential-master-bearings-for-dana-44-axles\" target=\"_blank\"\u003eQT1097 \u003c\/a\u003eDifferential Master Bearing Set\u003cbr\u003e\u003ca href=\"\/products\/1115-qt1115-dana-44-differential-side-bearing-installer\" target=\"_blank\"\u003eQT1115 \u003c\/a\u003eDifferential Side Bearing Installer\u003cbr\u003e\u003ca href=\"\/products\/1035-qt1035-differential-press-step-plate\" target=\"_blank\"\u003eQT1035 \u003c\/a\u003eDiff Press Plate\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy and GMC (Front Axle)\u003c\/strong\u003e: \u003cbr\u003eK20\/K25\/K2500: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK5 Blazer, Jimmy, K10\/K15: 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge (Front Axle):\u003c\/strong\u003e\u003cbr\u003eW100: 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eW200, W250 with Dana 44 axle: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord (Front Axle):\u003cbr\u003e\u003c\/strong\u003eF250 Dana 44 1978, 1979\u003cbr\u003eF250 Regular Cab: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977.5\u003cbr\u003eBronco: 1971, 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Front Axle):\u003c\/strong\u003e\u003cbr\u003e1100, 1200: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIHC (Rear Axle):\u003c\/strong\u003e\u003cbr\u003eScout: 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Front Axle):\u003c\/strong\u003e\u003cbr\u003eJ-Series Truck: 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep (Rear Axle):\u003c\/strong\u003e\u003cbr\u003eCJ5, CJ6: 1972, 1973, 1974, 1975\u003cbr\u003eCherokee, Wagoneer, J10: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41657422086221,"sku":"40632","price":200.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu40632-cropped-1280__13240.1728686478.1280.1280.png?v=1742525579"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/1957-1973-jeep-dana-44-front-cover-500__25900_52561abd-25c7-4d6e-a980-63a426a9cd69.jpg?v=1773182304","url":"https:\/\/torqueking.com\/collections\/1962-1973-jeep-truck-dana-44-closed-front-axles.oembed?page=2","provider":"Torque King 4x4","version":"1.0","type":"link"}