{"title":"1957-1971 Dodge W100 W200 W300 4x4 Front Axle","description":"\u003cp\u003eShop now for Dana 44 and Dana 70 4x4 Front Axle Parts, Tools, and Manuals for 1957-1971 Dodge W100, W200, DW300 trucks.\u003c\/p\u003e","products":[{"product_id":"1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket","title":"QT1025 Universal 4 Lug \u0026 6 Lug Spindle Hub Nut Socket","description":"\u003cp\u003e\u003cstrong\u003eQT1025 Universal 4 Lug\/6 Lug Front or Rear Spindle Nut Socket \u003c\/strong\u003e fits all 6 slot Dana Spicer 50\/Model 60 front axles and most 4 slot Dana Spicer Model 30\/Model 44 or GM 10 bolt front spindle nuts on Chevy, Dodge, Ford, GMC, IHC, and Jeep front axles. Also fits 1946-1972 GM H052, H072 Rear Axles, 1973 to 2010 GM 14 Bolt full float rear axles with 6 hole\/slot rear spindle nuts and 2003 to 2018 Dodge Ram 2500 and 3500 trucks which are equipped with AAM 10.50\", 11.50\" or 11.8\" rear axles. Will not work on '85-'96 Ford 1\/2 ton models with ratchet type spindle nut. 1\/2\" drive socket has 4 internal lugs for the lighter axles and 6 external lugs for heavier axles. USA Made. \u003cspan style=\"color: #ff0000\"\u003e\u003cem\u003eNot for impact use. Always Wear safety eye protection!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003ca href=\"#note1\"\u003e\u003cstrong\u003eNut Torque\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eDrive Lugs\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eNut Torque \u003c\/strong\u003e\u003cbr\u003e The spindle nut torque will vary with year and model, refer to the factory shop manual for your vehicle for spindle nut adjustment procedures.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Drive Lugs\u003c\/strong\u003e\u003cbr\u003e This socket has 2 sets of drive lugs. The inner 4 lug set fit front axles with 1-5\/8\" thread, 4 slot double spindle net sets (\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e, \u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e) typically found on Dana 44 and GM 10 Bolt front axles. The 6 outside drive lugs fit 2\" thread, 6 slot double spindle nut sets (\u003ca href=\"\/products\/4728-qk4728-4-piece-spindle-nut-kit-for-dana-60-front-gm-14-bolt-rear-axles\" target=\"_blank\"\u003eQK4728\u003c\/a\u003e) found on some 1977 to 1984 Dana 60 and Dana 50IFS front axles and many 1946 and later GM or AAM full float rear axles with either single or double rear spindle nuts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Matching Parts\u003cbr\u003e\u003c\/strong\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy\/GMC 1 Ton Dana 60 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1009-1980-1983-5-ford-dana-50ifs-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1009 1980-1983.5 Ford Dana 50IFS Front Axle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727\u003c\/a\u003e 3 Piece Front Spindle Nut Kit with 4 Slot Nuts, 1-5\/8\" Thread for Full Time and Manual Hubs\u003cbr\u003e\u003ca href=\"\/products\/4770-qk4770-front-4x4-spindle-nut-and-washer-set\" target=\"_blank\"\u003eQK4770\u003c\/a\u003e 3 Piece Front Spindle Nut Kit with 4 Slot Nuts, 1-5\/8\" Thread and Tabbed Lock Washer for Auto Hubs\u003cbr\u003e\u003ca href=\"\/products\/4728-qk4728-4-piece-spindle-nut-kit-for-dana-60-front-gm-14-bolt-rear-axles\" target=\"_blank\"\u003eQK4728\u003c\/a\u003e 4 Piece, Round, 6 Notch 1977-1984 Front or 1946-1981 Rear Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/10846-qu10846-dodge-aam-spindle-nut\" target=\"_blank\"\u003eQU10846\u003c\/a\u003e Spindle Nut for 2003-2018 Ram AAM 1050, 1150, 1180 Rear Axles\u003cbr\u003e\u003ca href=\"\/products\/10845-qu10845-locking-key-for-spindle-nut\" target=\"_blank\"\u003eQU10845\u003c\/a\u003e Spindle Nut Lock Key for 2003-2018 Ram AAM 1050, 1150, 1180 Rear Axles\u003cbr\u003e\u003ca href=\"\/products\/10866-qu10866-spindle-nut-lock-ring\" target=\"_blank\"\u003eQU10866\u003c\/a\u003e Spindle Nut Lock Ring for 2003-2018 Ram AAM 1050, 1150, 1180 Rear Axles\u003cbr\u003e\u003ca href=\"\/products\/30111-qu30111-rear-hub-spindle-nut-for-aam-gm-full-floating-rear-axles\" target=\"_blank\"\u003eQU30111\u003c\/a\u003e Spindle Nut for 1982-2010 GM and AAM 14 Bolt Full-Floating Rear Axles in Chevy and GMC Trucks\u003cbr\u003e\u003ca href=\"\/products\/30110-qu30110-spindle-nut-lock-key-for-gm-and-aam-full-floating-rear-axles\" target=\"_blank\"\u003eQU30110\u003c\/a\u003e Spindle Nut Lock Key for 1982-2010 GM and AAM 14 Bolt Full-Floating Rear Axles in Chevy and GMC Trucks\u003cbr\u003e\u003ca href=\"\/products\/30109-qu30109-rear-spindle-nut-retainer-ring-for-gm-aam-14-bolt-rear-axles\" target=\"_blank\"\u003eQU30109\u003c\/a\u003e Spindle Nut Retainer Ring for 1982-2010 GM and AAM 14 Bolt Full-Floating Rear Axles in Chevy and GMC Trucks\u003cbr\u003e\u003ca href=\"\/products\/1016-qt1016i-6-lug-spindle-nut-socket-for-front-and-rear-axle-applications\" target=\"_blank\"\u003eQT1016i\u003c\/a\u003e 6 Lug Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003cbr\u003e\u003c\/strong\u003eFront Axle Applications:\u003cbr\u003eK5, K10, K1000, K15, K1500, V1500, K20, K25, K2500, V2500 Dana 44 or GM 10 Bolt Front Axles: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991 \u003cbr\u003eK30, K35 Dana 60 Front Axle: 1977, 1978, 1979, 1980, 1981\u003c\/p\u003e \u003cp\u003eRear Axle Applications:\u003cbr\u003eGM 3\/4 ton or 1 ton H052 and H072 Full Floating Rear Axles: 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003cbr\u003eGM or AAM 10.5\" 14 Bolt Full Floating Rear Axle in C20, K20, C25, K25, C2500, K2500, C30, K30, C35, K35, C3500, K3500, R3500, V3500, Sierra HD 2500\/3500, Silverado HD 2500\/3500: 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010\u003cbr\u003eAAM 11.5\" 14 Bolt Full Floating Rear Axle in Sierra HD 2500\/3500, Silverado HD 2500\/3500: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Ram\u003c\/strong\u003e\u003cbr\u003eFront Axle Applications:\u003cbr\u003eW100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003eW150, W250, Ramcharger Dana 44 Front Axles: 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e\u003cbr\u003eRear Axle Applications: \u003cbr\u003e Full Float Model 60 or Model 70 Rear Axles equipped with TK4000 Spindle Nut Upgrade Kit: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eRam 1500 Mega Cab AAM 10.5\" Rear Axle: 2004, 2005, 2006, 2007, 2008, 2009, 2010\u003cbr\u003eRam 2500, Ram 3500 AAM 10.5\", 11.5\", Chassis Cab 12\" Rear Axles: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF100, F150, F250 Dana 44, Dana 44HD Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003cbr\u003eF150, F250, Bronco Dana 44IFS Front Axle with Double Spindle Nut: 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996\u003cbr\u003eF250 Crew Cab Dana 60 Front Axle: 1974, 1975, 1976, 1977 \u003cbr\u003eF250, F350 Dana 60 Front Axle: 1978, 1979\u003cbr\u003eF250, F350 Dana 50IFS Front Axle: 1980, 1981 1982, 1983, 1984 (Dana only lists for 1980, Ford lists to 1984, My shop experience indicates Ford is correct.)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1100, 1110 Series 1\/2 Ton Dana 44 Front Axle: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eCherokee, Cherokee Chief Dana 44 Front Axle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 1982, 1983\u003cbr\u003eJ10, J20 Truck Dana 44 Front Axle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003cbr\u003eWagoneer, Grand Wagoneer: Dana 44 Front Axle: 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41655849943117,"sku":"1025","price":52.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1025_1600_1__27005_27012__18354.1708621726.1280.1280.png?v=1785479121"},{"product_id":"1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles","title":"QT1041 Inner Axle Shaft Seal Installer with Depth Stop for Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"mimlogo.png\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.png\" title=\"mimlogo.png\" width=\"50\"\u003e\u003cbr\u003eQT1041 Inner Front Axle Shaft Oil Seal Installer for Dana 44 Front Axles \u003c\/strong\u003e installs the \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e current design original equipment CR made seal in many older 4x4 trucks with Dana-Spicer Model 44 axles. Our QT1041 has a depth stop making it easy to install these seals to the correct depth every time. Our custom, CNC Precision Machined, solid steel Seal Installer support these difficult to install seals in 3 locations so the seal cannot cock or get crushed during installation. (Also see \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e). Included in \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Kit and \u003ca href=\"\/products\/4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set\" target=\"_blank\"\u003eTS4871\u003c\/a\u003e Tool Set. Made in U.S.A. by Us Here in Montana.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*Important Note: Our custom Tool is made specifically for the \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e current design original equipment CR made seal. It most likely will NOT fit other make seals! We make our Tool EXACT so it will fit the seal and install super easy \u0026amp; perfectly in the axle housing. We like a professional installation in super quick time with no 'do overs'.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003ePrep\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003eBenefit of Custom Tool\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eFixed Depth Installer\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePrep:\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace the axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBenefit of Custom Tool:\u003c\/strong\u003e\u003cbr\u003eInstalling Dana 44 Inner Axle Shaft Oil Seals without damaging the seal, your axle housing, or your fingers can be difficult UNLESS you have the correct tools for the job. Combine this seal installer with our \u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Press Screw Assembly and \u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Thrust Plate, and you will quickly and easily install those pesky oil seals without mashing your fingers or cussing a blue streak! Plus the Seal will be installed right the first time, with no warranty comebacks!!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFixed Depth Installer:\u003c\/strong\u003e\u003cbr\u003eWe make two types of Seal Installers: Adjustable Depth and Fixed Depth. The QT1041 Installer on this page is a Fixed Depth Installer that will firmly stop at a preset depth (no measuring involved). Choose this Fixed Depth Installer if you want quick, fool-proof seal installation. Choose our \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Adjustable Depth Seal Installer if you want the flexibility to offset the seals to miss grooves worn in your axle shafts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seal\u003cbr\u003e\u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Inner Axle Seal Kit (includes 2 Seals, 1 for each side)\u003cbr\u003e\u003ca href=\"\/products\/4871-ts4871-dana-44-inner-fixed-depth-axle-seal-tool-set\" target=\"_blank\"\u003eTS4871\u003c\/a\u003e Inner Axle Seal Tool Set (no seals)\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications with Dana 44 Front Axle:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972.5, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250: 1967, 1968, 1969\u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC: \u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971.5, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655860854861,"sku":"1041","price":72.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1041_1200_clean__29660_12042__53623.1707817440.1280.1280.jpg?v=1786720054"},{"product_id":"1044-qt1044-inner-pinion-bearing-installer-for-1-5-16-1-3-8-id-bearings","title":"QT1044 Inner Pinion Bearing Installer for 1-5\/16\"-1-3\/8\" ID Bearings","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1044 1-5\/16\"-1-3\/8\" Inner Pinion Bearing Installer\u003c\/strong\u003e for Ford 9\"rear axle, Dana 25, Dana 27, Dana 30, Dana 44, Dana 44IFS, Dana 50, and Dana 50IFS front\/rear drive axles or other applications that require installing bearings with 1-5\/16\" to 1-3\/8\" inside diameters on long shafts. Made of steel construction with Black Oxide finish. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUsing\u003c\/a\u003e \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUsing\u003c\/strong\u003e\u003cbr\u003eWith this tool, you can easily drive on or press on your inner pinion bearing. Using a press is preferred, but regardless of the installation method, be sure to place a piece of stiff cardboard between the pinion and table. Doing so will protect the pinion teeth from getting chipped or damaged.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e Dana 25, Dana 27, Dana 30, Dana 44, Dana 44IFS, Dana 50, and Dana 50IFS\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41655862493261,"sku":"1044","price":43.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1044_1200_clean__26998_22003__66828.1707817543.1280.1280.jpg?v=1786096778"},{"product_id":"90018-qu90018-pyroplex-protection-es-2-synthetic-grease","title":"QU90018 Pyroplex Protection ES 2 Synthetic Grease","description":"\u003cp\u003e\u003cstrong\u003eQU90018 Pyroplex® Protection ES Synthetic Grease\u003c\/strong\u003e provides extended service protection for all chassis, driveshaft, u-joint, and wheel bearing applications under the harshest on and off road conditions! This NLGI #2 GC-LB grease is Hydro-Activated™ to become tackier when exposed to moisture. Offers superior corrosion and wear protection in a variety of environments. Provides excellent low and high-temperature performance. Enhanced extreme pressure performance for greater load carrying ability. This is the grease we use in our shop. Made in U.S.A. 14 oz. tube fits all standard grease guns. (\u003cem\u003eCannot be Air Shipped.)\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003eAlso See Our \u003ca href=\"\/collections\/specialized-lubricants\" target=\"_blank\"\u003eLubricants Web Page\u003c\/a\u003e for Our Complete Selection of Greases\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSynthetic Formula\u003c\/a\u003e \u003cbr\u003e \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSynthetic Formula \u003c\/strong\u003e\u003cbr\u003eThis is my favorite grease to use on almost all automotive and agricultural applications. It resists water washout better than any automotive grease I have ever used, plus the synthetic formula provides long-lasting, high-quality lubrication for both high and low-speed bearings, shafts, and bushings.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eUniversal for most 4x4 chassis and power train components calling for a NLGI #2 EP Grease\u003c\/p\u003e \u003cp\u003e* For a NON-synthetic grease of similar performance, use \u003ca href=\"\/products\/90033-qu90033-lubriplate-high-performance-wheel-bearing-grease-16-oz\" target=\"_blank\"\u003eQU90033\u003c\/a\u003e\u003c\/p\u003e  \u003cp\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Castrol","offers":[{"title":"Default Title","offer_id":41655875371085,"sku":"90018","price":18.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu90018_1200_clean__97521_12233__55944.1707817975.1280.1280.jpg?v=1786097789"},{"product_id":"393-27656-7x-used-right-axle-shaft","title":"27656-7X USED RIGHT AXLE SHAFT","description":"\u003cp\u003e\u003cstrong\u003e27656-7X Good Used Right Inner Axle Shaft\u003c\/strong\u003e for 1969-1970 Dodge W100 Dana 44 closed knuckle front axle. 18.5\" Long.  Can only be purchased with \u003ca href=\"\/products\/394-27656-8x-used-left-inner-shaft\"\u003e27656-8X\u003c\/a\u003e\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41655917281357,"sku":"27656-7X","price":104.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/27656_7x_2__57258_7240__76581.1707818507.1280.1280.jpg?v=1786099025"},{"product_id":"394-27656-8x-used-left-inner-shaft","title":"27656-8X USED LEFT INNER SHAFT","description":"\u003cp\u003e\u003cstrong\u003e27656-8X Good Used Left Inner Axle Shaft\u003c\/strong\u003e for 1969-1970 Dodge W100 Closed Knuckle front axle. Length is 36-31\/32\". See \u003ca href=\"\/products\/393-27656-7x-used-right-axle-shaft\"\u003e27656-7x\u003c\/a\u003e to purchase both shafts\u003c\/p\u003e","brand":"Dana Spicer","offers":[{"title":"Default Title","offer_id":41655917314125,"sku":"27656-8X","price":104.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/27656_8x_2__65164_7241__03356.1707818526.1280.1280.jpg?v=1786098492"},{"product_id":"473-vsg4550-axle-u-joint-with-internal-c-clip-service-dvd-video","title":"VSG4550 Axle U-Joint with Internal C-Clip Service DVD Video","description":"\u003cp\u003e\u003cstrong\u003eVSG4550 Axle U-Joint with Internal C-Clip Service DVD Video\u003c\/strong\u003e featuring both greaseable and non-greaseable u-joints.\u003c\/p\u003e","brand":"Dan the Gear Man","offers":[{"title":"Default Title","offer_id":41655951949901,"sku":"473","price":10.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/1891133873358730495_49963__77192_159__60016.1707819037.1280.1280.jpg?v=1786095511"},{"product_id":"707-qu90017-1-pound-tub-pennzoil-707l-wheel-bearing-and-chassis-grease","title":"QU90017 1 Pound Tub Pennzoil 707L Wheel Bearing and Chassis Grease","description":"\u003cp\u003e\u003cstrong\u003eQU90017 Pennzoil 707L 1 Pound Tub Premium Red Wheel bearing Grease\u003c\/strong\u003e is a premium, extreme pressure, high performance wheel bearing and chassis grease with special additives providing excellent rust protection and high resistance to water washout. QU90017 is a high quality, non-synthetic grease suitable for all 4x4 and light truck disc and drum brake wheel bearing applications, plus it is an ideal grease for chassis lubrication. NLGI rating: #2 GC-LB Made in U.S.A. 16 oz resealable container. (Cannot be Air Shipped.)\u003c\/p\u003e\n\u003cp\u003eAlso available in 14oz tube: \u003cstrong\u003e\u003ca href=\"\/products\/90013-qu90013-14oz-tube-pennzoil-707l-wheel-bearing-and-chassis-grease\"\u003eQU90013 \u003c\/a\u003eTube Red Grease\u003c\/strong\u003e 14 oz tube fits all standard grease guns.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/Pennzoil_707L.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/Pennzoil_707L_MSDS.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Pennzoil","offers":[{"title":"Default Title","offer_id":41656025514061,"sku":"707","price":9.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/707tubclean__26484_10536__80714.1707820017.1280.1280.jpg?v=1786096254"},{"product_id":"1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip","title":"QT1100 1\" X 8\" Driver Handle for Installers \u0026 Removers with 5\/8\" Tip","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1100 1\" x 8\" Standard Duty Installer Driver Handle with 5\/8\" Tip \u003c\/strong\u003eand knurled hand grip is used with \u003ca href=\"\/collections\/wheel-bearing-and-hub-tools\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eQT15XX\u003c\/span\u003e\u003c\/a\u003e series Seal Installers and \u003ca href=\"\/collections\/bearing-cup-installers\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eQT18XX\u003c\/span\u003e\u003c\/a\u003e series Bearing Cup Installers with 5\/8\" center holes. QT1100 will become one of the most used tools in your shop as it fits almost all our time saving seal and bearing cup installers. Give up those part wrecking, time wasting, hand smashing jury-rig installers and do the job quickly and efficiently with QT1100 and the correct seal and cup installers for your application! Black Oxide finish\u003cem\u003e.\u003c\/em\u003e 1\" diameter x 8\" usable length for general purpose use. Made in Montana, U.S.A.\u003c\/p\u003e\n\u003cp\u003eSee \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116 for the Pro-Duty\u003c\/a\u003e 1-1\/4\"x 8\" Driver Handle\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eFor 5\/8\" Center Hole\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eFront Wheel Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eFront Wheel Seal Installers\u003c\/strong\u003e \u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eFront Spindle and Axle Shaft Seal, Bearing, Bushing Installers\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eRear Wheel Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eRear Wheel Bearing Seal Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eSemi-Float Rear Axle Wheel Bearing Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003ePinion Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eDifferential Side Bearing Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note10\"\u003e\u003cstrong\u003eTransmission Bearing Cup Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note11\"\u003e\u003cstrong\u003eTransmission Seal Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note12\"\u003e\u003cstrong\u003eTransfer Case Bearing Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note13\"\u003e\u003cstrong\u003eTransfer Case Seal Installers\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note14\"\u003e\u003cstrong\u003eSteering Gear Bearing and Seal Installers\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFor 5\/8\" Center Hole\u003c\/strong\u003e\u003cbr\u003eMade for QUAD 4x4 Bearing and Seal installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e 8\", \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e 14\" and 1-1\/4\" diameter for professional use (\u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e 8\", \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e 14\").\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFront Wheel Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1001-exploded-view-1975-1989-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1001 1975-1989 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1004-exploded-view-1990-1993-dodge-w250-w350-dana-60-61-front-axle\" target=\"_blank\"\u003eXV1004 1990-1993 Dodge W250, W350 Dana 60\/61 Front Axle\u003cbr\u003e\u003c\/a\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy\/GMC 1 Ton Dana 60 Front Axle\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e Installs \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e and \u003ca href=\"\/products\/50446-qu50446-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50446\u003c\/a\u003e or Timken Bearing Cups JLM104910 and LM104911\u003cbr\u003e\u003ca href=\"\/products\/1804-qt1804-bearing-cup-installer-3-13-16-approximate-outside-diameter\" target=\"_blank\"\u003eQT1804\u003c\/a\u003e Installs \u003ca href=\"\/products\/50396-qu50396-timken-3-13-16-od-taper-wheel-or-diff-bearing-cup\" target=\"_blank\"\u003eQU50396\u003c\/a\u003e and \u003ca href=\"\/products\/50413-qu50413-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50413\u003c\/a\u003e or Timken Bearing Cups 382A and 28622\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFront Wheel Seal Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xv1006-1977-1991-chevy-gmc-dana-60-front-axle-interactive-exploded-view\" target=\"_blank\"\u003eXV1006 1977-1991 Chevy\/GMC 1 Ton Dana 60 Front Axle\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFront Spindle and Axle Shaft Seal, Bearing, Bushing Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRear Wheel Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003eExploded View \u003ca href=\"\/products\/sku-xvd284-2019-up-ram-4500-5500-drw-rear-hub-aam-12-exploded-view\"\u003eXVD284 2019-up Ram 4500, 5500 DRW Hub\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e Installs \u003ca href=\"\/products\/50412-qu50412-timken-taper-wheel-bearing-for-front-and-rear-axles\" target=\"_blank\"\u003eQU50412\u003c\/a\u003e and \u003ca href=\"\/products\/50732-qu50732-timken-high-performance-outer-wheel-bearing-cup\" target=\"_blank\"\u003eQU50732\u003c\/a\u003e,or Timken Bearing Cups LM104911 and NP913325\u003cbr\u003e\u003ca href=\"\/products\/1804-qt1804-bearing-cup-installer-3-13-16-approximate-outside-diameter\" target=\"_blank\"\u003eQT1804\u003c\/a\u003e Installs \u003ca href=\"\/products\/50396-qu50396-timken-3-13-16-od-taper-wheel-or-diff-bearing-cup\" target=\"_blank\"\u003eQU50396\u003c\/a\u003e, \u003ca href=\"\/products\/50413-qu50413-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50413\u003c\/a\u003e, \u003ca href=\"\/products\/50623-qu50623-inner-rear-wheel-bearing-cup-for-ford-sterling-10-5-rear-axles\" target=\"_blank\"\u003eQU50623\u003c\/a\u003e, and \u003ca href=\"\/products\/50735-qu50735-timken-high-performance-inner-wheel-bearing\" target=\"_blank\"\u003eQU50735\u003c\/a\u003e or Timken Bearing Cups 382A, 28622, NP064306, and NP706218\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRear Wheel Bearing Seal Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSemi-Float Rear Axle Wheel Bearing Installers \u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePinion Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e Installs \u003ca href=\"\/products\/50404-qu50404-timken-inner-or-outer-pinion-bearing-cup\" target=\"_blank\"\u003eQU50404\u003c\/a\u003e or Timken Bearing Cup M802011\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDifferential Side Bearing Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note10\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 10:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransmission Bearing Cup Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003cbr\u003e\u003ca href=\"\/products\/1801-qt1801-bearing-cup-installer-for-82mm-3-1-4-od-taper-bearing-cups\" target=\"_blank\"\u003eQT1801\u003c\/a\u003e installs \u003ca href=\"\/products\/10125-qu10125-timken-nv4500-input-bearing-cup\" target=\"_blank\"\u003eQU10125\u003c\/a\u003e (NV4500) \u003ca href=\"\/products\/10137-qu10137-timken-special-1996-2007-gm-nv4500-input-bearing-cup\" target=\"_blank\"\u003eQU10137\u003c\/a\u003e (NV4500), and \u003ca href=\"\/products\/12051-qu12051-timken-countershaft-center-bearing-cup-for-nv5600-6-speed\" target=\"_blank\"\u003eQU12051\u003c\/a\u003e (NV5600) or Timken Bearing Cups M802011AP, NP728109, NP882000\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note11\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 11:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransmission Seal Installers \u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note12\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 12:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransfer Case Bearing Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note13\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 13:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTransfer Case Seal Installers \u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note14\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 14:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSteering Gear Bearing and Seal Installers\u003c\/strong\u003e\u003cbr\u003eAs we add new Exploded Views to our website, we will be updating the matching Installers\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656049827917,"sku":"1100","price":39.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT1100_094348_1600__42281_29740__36096.1708621796.1280.1280.png?v=1786096490"},{"product_id":"1813-qt1813-knuckle-bearing-or-king-pin-bearing-cup-installer-for-dana-44hd-60-70","title":"QT1813 Knuckle Bearing or King Pin Bearing Cup Installer for Dana 44HD, 60, 70","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQT1813 King Pin or Knuckle Bearing Cup Installer for Dana 44HD, 60, 61, 70 and 1943-1971 Dodge Power Wagon Front Axles\u003c\/strong\u003e is used to install \u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" target=\"_blank\"\u003eQU50601 \u003c\/a\u003eor Timken 23256 Steering Knuckle Bearing Cups in 1958-1982 closed knuckle Dana 44HD, Dana 60, Dana 70 front axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s PLUS 1943-1971 Dodge Civilian and military Power Wagon 8-3\/4\" and 9-5\/8\" Closed Knuckle front axles. QU1813 is also the correct tool to drive in the Lower King Pin Bearing Cups for \u003cstrong\u003e1975-1993\u003c\/strong\u003e Dana 60 and Dana 61 king pin type \u003cstrong\u003eopen knuckle\u003c\/strong\u003e front axles in Chevy, Dodge, Ford, GMC, and International heavy-duty 4x4 trucks. USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eProduct Note\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eTool Handles\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eProduct Note\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cbr\u003eUsing a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTool Handles\u003c\/strong\u003e\u003cbr\u003eI recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for Knuckle Bearing Cup Installation.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eK20, K25 Dana 44HD Closed Knuckle Axle: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e\u003cbr\u003eW200 Dana 44HD Closed Knuckle Front Axle: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eW-250HD, W-350 Dana 60 King Pin Type Open Knuckle Front Axle: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW250HD and W-350 Dana 61 King Pin Type Open Knuckle Front Axle: 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e W-300 Dana 70 Closed Knuckle Front Axle: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 \u003cbr\u003eW-600 Dana 70 Closed Knuckle Front Axle: 1974, 1975, 1976, 1977, 1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003e F-250 Dana 44HD Closed Knuckle Front Axle: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e F-250 Crew Cab Dana 60 Closed Knuckle Front Axle: 1974, 1975\u003cbr\u003e F-250 Dana 60 King Pin Type Open Knuckle Front Axle: 1976, 1977, 1978, 1979\u003cbr\u003eF-350 Dana 60 King Pin Type Open Knuckle Front Axle: 1976, 1977, 1978, 1979, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational\u003c\/strong\u003e\u003cbr\u003e Dana 44HD Closed Knuckle: 3\/4 and 1 ton 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e 1300 Camper Special Dana 60 King Pin Type Open Knuckle Front Axle: 1975\u003cbr\u003e 1400, 1600 Dana 70 Closed Knuckle Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e\u003cbr\u003e M715, M725, M726 1-1\/4 ton Military Dana 60 Closed Knuckle Front Axle: 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative\"\u003e\u003ciframe allowfullscreen=\"\" height=\"240\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" width=\"320\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e \u003cscript src=\"https:\/\/player.vimeo.com\/api\/player.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656069652557,"sku":"1813","price":26.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT1813_clean__21672_25019__36129.1707820707.1280.1280.png?v=1786718424"},{"product_id":"1819-qt1819-knuckle-bearing-cup-installer-for-dana-25-27-30-44-front-axles","title":"QT1819 Knuckle Bearing Cup Installer for Dana 25, 27, 30 \u0026 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1819 Knuckle Bearing Cup Installer for Dana 25, 27, 30 and 44 Front Axles\u003c\/strong\u003e is used to install \u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e Steering Knuckle Bearing Cups in 1953-1975 standard duty Dana 25, 27, 30, 44 closed knuckle front axles in Chevy, Dodge, Ford, GMC, IHC, Jeep, and Studebaker 4x4s. QU1819 is also the correct tool to drive in the King Pin Bearing Cups for 1966-1971 Ford Bronco Dana 30 and 1967-1971 F-100 Dana 44 open knuckle axles. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eCup Installer\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eHandle\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"#video\"\u003eVideo\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCup Installer \u003c\/strong\u003e\u003cbr\u003eUsing a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHandle\u003c\/strong\u003e\u003cbr\u003eI recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for Knuckle Bearing Cup Installation.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e\u003cbr\u003eGM 4x4 Suburban, K10, K15, K20, K25 Dana 44 Standard Closed Knuckle Axle: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e\u003cbr\u003eW100, W200 Dana 44 Standard Closed Knuckle Front Axle: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFord\u003c\/strong\u003e\u003cbr\u003eBronco Dana 30 Open Knuckle King Pin Axle: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eF-250 Dana 44 Closed Knuckle Standard Duty Front Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966 F-100, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eF-100 Dana 44 Open Knuckle King Pin Axle: 1967, 1968, 1969, 1970, 1971\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eInternational\u003c\/strong\u003e\u003cbr\u003eScout Dana 27, Dana 30 Closed Knuckle Front Axles: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eDana 44 Closed Knuckle 1\/2 ton and light 3\/4 ton: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e\u003cbr\u003eDana 25, Dana 27, Dana 44 Closed Knuckle 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eStudebaker\u003c\/strong\u003e\u003cbr\u003eDana 44 Closed Knuckle Front Axles 4x4 Pickups: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative;\"\u003e\u003ciframe width=\"320\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" height=\"240\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656076795981,"sku":"1819","price":26.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT1812_clean__33818_24916__12839.1707820954.1280.1280.png?v=1786722558"},{"product_id":"1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip","title":"QT1101 1\" X 14\" Driver Handle for Installers and Removers. 5\/8\" Tip","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1101 14\" Standard Duty Installer Driver Handle\u003c\/strong\u003e with knurled hand grip are used with \u003ca rel=\"noopener\" href=\"\/collections\/wheel-bearing-and-hub-tools\" target=\"_blank\"\u003e\u003cspan\u003eQT15XX\u003c\/span\u003e \u003c\/a\u003eseries Seal Installers and \u003ca rel=\"noopener\" href=\"\/collections\/bearing-cup-installers\" target=\"_blank\"\u003e\u003cspan\u003eQT18XX\u003c\/span\u003e \u003c\/a\u003eseries Bearing Cup Installers with 5\/8'\" center holes. 1\" diameter x 14\" usable length for deep seated seals and bearings. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eInstallers with 5\/8” Center Hole\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallers With 5\/8” Center Hole \u003c\/strong\u003e\u003cbr\u003eMade for installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003cspan style=\"color: #333333;\"\u003eQT1101\u003c\/span\u003e) and 1-1\/4\" diameter for professional use (\u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656078270541,"sku":"1101","price":42.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1101_1600__60448_29744__44278.1708621800.1280.1280.png?v=1786716972"},{"product_id":"1803-qt1803-front-inner-wheel-taper-bearing-cup-installer","title":"QT1803 Front Inner Wheel Taper Bearing Cup Installer","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1803 Front Inner Wheel Taper Bearing Cup Installer\u003c\/strong\u003e for installing LM603011 Bearing Cups in many 1\/2 ton to 3\/4 ton 4x4 front wheel hubs. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5\/8\" tip. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eBenefits\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eDriver Handles\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBenefits\u003c\/strong\u003e\u003cbr\u003eUsing a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDriver Handles\u003c\/strong\u003e\u003cbr\u003eI recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for most applications and a 14\" handle (\u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e) for deep set inner pinion, rear hub and transmission bearing cups.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eQT1803 Front Inner Wheel Bearing Applications\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e K5 Blazer\/Jimmy, K10\/15 1\/2 ton Pickup \u0026amp; Suburban 1958-early 1977\u003cbr\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e W100 1969-1974\u003cbr\u003e\u003cstrong\u003eFord: Bronco:\u003c\/strong\u003e 1966-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e F100\/150: 1959-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e 1\/2 Ton with 5 bolt wheel and axle models FA16, 17, 46\u003cbr\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e J-Series Full Size Cherokee, Wagoneer, 1\/2 ton Pickup 1974-early 1977\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative;\"\u003e\u003ciframe width=\"320\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" height=\"240\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656078860365,"sku":"1803","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1803_1200_clean__01267_11727__55373.1708621804.1280.1280.jpg?v=1786093888"},{"product_id":"1802-qt1802-bearing-cup-installer-2-7-8-approximate-outside-diameter","title":"QT1802 Bearing Cup Installer 2-7\/8\" Approximate Outside Diameter","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e QT1802 Bearing Cup Installer \u003c\/strong\u003eis specifically machined to fit QU10142, QU10145, QU50447, QU50629, and QU50653 bearing cups commonly used in axle, transmission and wheel applications. Precision CNC machined solid steel tool is drilled to accept any driver handle with a 5\/8\" tip. Made in Montana, U.S.A.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUsing Installer\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eAvailable Handles\u003cbr\u003e\u003c\/a\u003e\u003ca href=\"#note3\"\u003eCompatible with Timken\u003c\/a\u003e\u003c\/strong\u003e\u003ca href=\"#video\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUsing Installer\u003c\/strong\u003e\u003cbr\u003e Using a Bearing Cup Installer not only saves time, but, more importantly, also allows you to install the bearing cup without damaging either the cup or bearing bore. Bearing Cup Installers are the key to damage free bearing cup installation. With one, you can completely seat those bearing cups without nicks or dings. Using the proper Cup Installer and Handle completely eliminates one of the most common causes of premature bearing failure, namely installation with punches or other makeshift tools. See \u003ca href=\"#video\"\u003eVideo\u003c\/a\u003e below.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAvailable Handles\u003c\/strong\u003e\u003cbr\u003e I recommend an 8\" handle (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e) for most applications and a 14\" handle (\u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e) for deep set inner pinion, rear hub and transmission bearing cups.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eCompatible with Timken Numbers\u003c\/strong\u003e\u003cbr\u003e QT1802 is compatible with these Timken or industry standard bearing cups: LM102910, LM102910P, LM501310, LM501310P, and LM501314\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e \u003cspan style=\"color: #ff6600\"\u003eUse QT1802 Cup Installer for These Transmission Countershaft Front Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e\u003cbr\u003eAll with NV4500 5 Speed Manual Transmission (MW3, MT8 codes): 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge\u003c\/strong\u003e:\u003cbr\u003e All Ram 2500, Ram 3500 with NV4500 and NV4500HD 5 Speed Manual Transmission: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff00ff\"\u003eUse QT1802 Cup Installer for These Front Inner Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eIHC\u003c\/strong\u003e:\u003cbr\u003eScout: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e:\u003cbr\u003eCJ5, CJ6, CJ, CJ7, CJ8: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e All Jeepster Commando and Scrambler \u003cbr\u003e J Series Light Duty: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #008000\"\u003eUse QT1802 Cup Installer for These Front Outer Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC\u003c\/strong\u003e: \u003cbr\u003e Full Size Blazer\/ Jimmy and Suburban: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003e 1\/2 Ton K10\/15\/K1500\/V1500: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003cbr\u003e 3\/4 Ton K20\/25\/2500\/V2500: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1978, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord\u003c\/strong\u003e: \u003cbr\u003e Bronco: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e F100, F150: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996-1996 except 1987-1991 Axle Tag #'s 610267, 610309, 610311\u003cbr\u003e F250 Model 44 Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003e W100: 1969, 1970, 1971, 1972, 1973, 1974\u003cbr\u003e W150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003e W250 (Gas): 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC\u003c\/strong\u003e: \u003cbr\u003e Scout: 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep\u003c\/strong\u003e: \u003cbr\u003e CJ5, CJ6, CJ7, CJ8: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986\u003cbr\u003e All Jeepster Commando and Scrambler \u003cbr\u003e J-Series Full Size Cherokee, Wagoneer, Pickup, FC150: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eToyota\u003c\/strong\u003e:\u003cbr\u003eLandcruiser, 4 Runner and Pickup: 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff\"\u003eUse QT1802 Cup Installer for These Rear Outer Wheel Bearing Cup Applications\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eToyota:\u003c\/strong\u003e\u003cbr\u003e Landcruiser with full float rear axle: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 192, 1993, 1994, 1995, 1996, 1997\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003ca name=\"video\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eVideo:\u003c\/strong\u003e\u003c\/span\u003e \u003cdiv style=\"padding: 1.25% 0 0 0; position: relative\"\u003e\u003ciframe allowfullscreen=\"\" height=\"240\" src=\"https:\/\/player.vimeo.com\/video\/806209704?h=626c1032c3\u0026amp;badge=0\u0026amp;autopause=0\u0026amp;player_id=0\u0026amp;app_id=58479\" width=\"320\" style=\"border:0;\" title=\"Bearing Cup Installer Product Video\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e \u003cscript src=\"https:\/\/player.vimeo.com\/api\/player.js\" type=\"text\/javascript\"\u003e\u003c\/script\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656081743949,"sku":"1802","price":32.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1802_1_1200_clean__63711_16535__19685.1707821136.1280.1280.jpg?v=1786722524"},{"product_id":"1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle","title":"QT1116 1-1\/4\" x 8\" Pro Duty Installer Driver Handle","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1116 8\" Pro Duty Installer Driver Handle\u003c\/strong\u003e with knurled hand grip are used with \u003ca href=\"\/collections\/wheel-bearing-and-hub-tools\" target=\"_blank\" rel=\"noopener\"\u003eQT15XX \u003c\/a\u003eseries Seal Installers and \u003ca href=\"\/collections\/bearing-cup-installers\" target=\"_blank\" rel=\"noopener\"\u003eQT18XX \u003c\/a\u003eseries Bearing Cup Installers with 5\/8'\" center holes. Black Oxide finish. 1.25\" diameter x 8\" usable length for general purpose use. Black Oxide Finish. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eFor 5\/8” Center Hole\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFor 5\/8” Center Hole\u003c\/strong\u003e\u003cbr\u003eMade for installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e) and 1-1\/4” diameter for professional use (QT1116, \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656098881613,"sku":"1116","price":39.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1116_clean__59047_29750__09256.1708621816.1280.1280.png?v=1786098795"},{"product_id":"1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles","title":"QT1161 Seal Installer Thrust Plate for Dana 44 Front Axles","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQT1161 Seal Installer Thrust Plate for 1955-2006 Dana 44 Front Axles\u003c\/strong\u003e is used with \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Press Screw and the correct Seal Installer for your axle to install the inner axle shaft oil seals in 1955-2006 Dana 44 4x4 solid beam front axles without vacuum controlled Central Axle Disconnect. Applications include Chevy\/GMC 1960-1980, Dodge 1957-1984, Ford 1959-1979, IHC 1955-1980, and Jeep J-Series 1962-1991, and Jeep Wrangler Rubicon 2003-2006. Made in U.S.A. by Us Here in Montana.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eMust be Removed\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMust be Removed\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace the axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eThrust Plate fits against Differential Bore Face when pressing in opposite axle seal. (Thrust Plate has 5\/8\" ID center hole.)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003eApplications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJ-Series Dana 44 Front Axles: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eWrangler Rubicon Dana 44 Front Axles: 2003, 2004, 2005, 2006\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656112513101,"sku":"1161","price":41.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1161__53255_7535__94303.1707821970.1280.1280.jpg?v=1786097725"},{"product_id":"1504-qt1504-dana-30-dana-44-and-gm-10-bolt-front-wheel-seal-installer","title":"QT1504 Dana 30, Dana 44 and GM 10 Bolt Front Wheel Seal Installer","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Made in Montana logo\" height=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" title=\"Made in Montana logo\" width=\"50\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-md-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eQT1504 Dana 30, Dana 44 and GM 10 Bolt Front Wheel Seal Installer \u003c\/strong\u003e is specifically made to install \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eand \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003einner wheel grease seals to the correct depth without damaging the seal. Applications include many 1960 to early 1990s Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s up to 3\/4 ton class. A relief groove in the installer allows adequate clearance for the outer seal lip on \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091\u003c\/a\u003e, thereby preventing one of the most common causes of premature seal failure. Aluminum Installer is Made in U.S.A. by us here in Roberts, Montana.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eLubricate\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003eDriver Handles\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eRedesign\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubricate\u003c\/strong\u003e\u003cbr\u003eAfter the seal is installed, lubricate the seal lip with clean wheel bearing grease.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDriver Handles\u003c\/strong\u003e\u003cbr\u003eQT1504 has a 5\/8\" center hole for attaching Installer to \u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e, \u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e, or \u003ca href=\"\/products\/1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1119 \u003c\/a\u003eDriver Handles.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRedesign\u003c\/strong\u003e\u003cbr\u003eQT1504 was redesigned in June of 2013 to replace QT1507 and the previous version of QT1504. QT1504 can now be used to install both \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003esingle lip inner wheel grease seal without a garter spring and \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003edouble lip inner wheel grease with a garter spring. \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003ewas used in 1960 to early 1970's hubs with shallow depth seal bores. \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eis used in disc brake hubs with deep seal bores. Although the two seals share the same ID and OD they are not interchangeable due to performance and depth differences.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eApplications\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e(Partial List)\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003cbr\u003e\u003c\/strong\u003eBlazer, Jimmy, K10, K15 pickups and Suburbans with Dana 44 Front Axles: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980\u003cbr\u003eK20, K25 pickups and Suburbans with Dana 44 Front Axles: 1977.5, 1978, 1979, 1980, 1981\u003cbr\u003eBlazer, Jimmy, K10, K15, K1500, K20, K25, K2500 pickups and Suburbans with GM 10 Bolt Front Axles: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100 1\/2 ton 4x4 trucks with Dana 44 Drum Brake front axles: 1969, 1970, 1971\u003cbr\u003eRamcharger, Trailduster, W150, and W250 4x4s with Dana 44 Front Axles: 1980, 1981, 1982, 1983, 1984\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF150 with Dana 44 Front Axles: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF250 with Dana 44 Front Axles up to Serial Number F70000: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1969.5\u003cbr\u003eF250 with Dana 44HD Front Axles: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eFord F150 and Bronco with Dana 44 Front Axles up to Serial Number F70000: 1966, 1967, 1968, 1969, 1969.5\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656118476877,"sku":"1504","price":26.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1504_1600_1__47684.1721681828.1280.1280.png?v=1786730998"},{"product_id":"1119-qt1119-1-1-4-x-14-pro-duty-installer-driver-handle","title":"QT1119 1-1\/4\" x 14\" Pro Duty Installer Driver Handle","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1119 14\" Pro Duty Installer Driver Handle\u003c\/strong\u003e with knurled hand grip are used with \u003ca rel=\"noopener\" href=\"\/collections\/wheel-bearing-and-hub-tools\" target=\"_blank\"\u003eQT15XX \u003c\/a\u003eseries Seal Installers and \u003ca rel=\"noopener\" href=\"\/collections\/bearing-cup-installers\" target=\"_blank\"\u003eQT18XX \u003c\/a\u003eseries Bearing Cup Installers with 5\/8'\" center holes. 1.25\" diameter x 14\" usable length for deep seated seals and bearings. Made in Montana, USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eTech Note 1\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstallers with 5\/8” Center Hole\u003c\/strong\u003e\u003cbr\u003eMade for installers with 5\/8\" center hole. Use 8\" for general purpose use, or 14\" for deep seated bearing cups such as inner pinion and transmission case. Available in 1\" diameter for general purpose use (\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\" target=\"_blank\"\u003eQT1100\u003c\/a\u003e, \u003ca href=\"\/products\/1101-qt1101-1-x-14-driver-handle-for-installers-and-removers-5-8-tip\" target=\"_blank\"\u003eQT1101\u003c\/a\u003e) and 1-1\/4\" diameter for professional use (\u003ca href=\"\/products\/1116-qt1116-1-1-4-x-8-pro-duty-installer-driver-handle\" target=\"_blank\"\u003eQT1116\u003c\/a\u003e, QT1119).\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003eUniversal\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656122081357,"sku":"1119","price":47.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1119_1_clean_cropped_webp__70723_29782__81086.1708621880.1280.1280.jpg?v=1786732321"},{"product_id":"593-tmd67usb-1967-1968-dodge-factory-service-manuals-on-usb","title":"TMD67USB 1967-1968 Dodge Factory Service Manuals on USB","description":"\u003cp\u003e\u003cstrong\u003eTMD67USB 1967-1968 Complete Dodge Factory Service Manuals on USB\u003c\/strong\u003e for D150, W150, D250, W250, D350, and W350 models are your source for complete service, maintenance, and overhaul information for your 1967-1968 Dodge Ram truck. Our Chrysler authorized reproduction Factory Shop Manuals cover almost everything you may need to service on your big Ram truck from alternator testing to wheel bearing replacement. Dodge Factory Manuals include hundreds of black and white illustrations, service procedures, torque specifications, wiring diagrams, and troubleshooting charts. 1967-1968 Dodge Ram Factory Shop Manuals include coverage of axles, body, brakes, clutch, drive shaft, engine, electrical, exhaust, frame, transfer case, transmission, steering, and suspension. All pages are available to print out as an instant reference while working in the garage, away from the computer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTMD67USB supersedes TMD67CD 1967-1968 Complete Dodge Factory Service Manuals on CD\u003c\/em\u003e\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656129159245,"sku":"593","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/Manuals_on_USB_1200_e65708b5-6b04-43e8-b2f2-5ad6f7a4e5b3.jpg?v=1782217645"},{"product_id":"594-tmd66cd-1966-dodge-ld-truck-and-a-100-van-factory-service-manuals-on-cd","title":"TMD66CD 1966 Dodge LD Truck and A-100 Van Factory Service Manuals on CD","description":"\u003cp\u003e\u003cstrong\u003eTMD66CD 1966 Complete Dodge Light Duty Truck and A-100 Van Factory Service Manuals on CD \u003c\/strong\u003eare your source for complete service, maintenance, and overhaul information for your 1966 Dodge truck. Our Chrysler authorized reproduction Factory Shop Manuals cover almost everything you may need to service on your big Dodge truck from alternator testing to wheel bearing replacement. Dodge Factory Manuals include hundreds of black and white illustrations, service procedures, torque specifications, wiring diagrams, and troubleshooting charts. 1966 Dodge truck Factory Shop Manuals include coverage of axles, body, brakes, clutch, drive shaft, engine, electrical, exhaust, frame, transfer case, transmission, steering, and suspension. All pages are available to print out as an instant reference while working in the garage, away from the computer.\u003c\/p\u003e","brand":"OEM Shop Manual","offers":[{"title":"Default Title","offer_id":41656129585229,"sku":"594","price":44.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tmd66cdclean__97780_10336__65542.1707822586.1280.1280.jpg?v=1742475153"},{"product_id":"659-tmd65usb-1965-dodge-d-w-100-700-truck-factory-service-manuals-on-usb","title":"TMD65USB 1965 Dodge D\/W 100-700 Truck Factory Service Manuals on USB","description":"\u003cp\u003e\u003cstrong\u003eTMD65USB 1965 Complete Dodge D\/W 100-700 Light Duty Truck Factory Service Manuals on USB\u003c\/strong\u003e are your source for complete service, maintenance, and overhaul information for your 1965 Dodge truck. Our Chrysler authorized reproduction Factory Shop Manuals cover almost everything you may need to service on your big Dodge truck from alternator testing to wheel bearing replacement. Dodge Factory Manuals include hundreds of black and white illustrations, service procedures, torque specifications, wiring diagrams, and troubleshooting charts. 1965 Dodge Truck Factory Shop Manuals include coverage of axles, body, brakes, clutch, drive shaft, engine, electrical, exhaust, frame, transfer case, transmission, steering, and suspension. All pages are available to print out as an instant reference while working in the garage, away from the computer.\u003c\/p\u003e","brand":"OEM Shop Manual","offers":[{"title":"Default Title","offer_id":41656161894477,"sku":"659","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tmd65cdclean__56939_10335__16186.1707823273.1280.1280.jpg?v=1786726146"},{"product_id":"1130-qt1130-dana-60-dana-70-thrust-plate-for-axle-seal-installer-tools","title":"QT1130 Dana 60, Dana 70 Thrust Plate for Axle Seal Installer Tools","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg width=\"50\" title=\"Made in Montana logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/mimlogo.jpg?v=1742363377\" height=\"50\" alt=\"Made in Montana logo\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQT1130 Inner Axle Seal Installer Thrust Plate for Dana 60, Dana 61, Super 60, and Dana 70 Front Axles\u003c\/strong\u003e Fits all Dana Model 60, Super 60, 61, and Closed Knuckle Model 70 axles from 1957-current. QT1130 is placed against the differential bearing bore face opposite of the side you are pressing in a new seal. QT1130 is included in many Kits \u0026amp; Tool Sets. Custom CNC Machined, Made in U.S.A. by Us Here in Montana.\u003c\/p\u003e\n\u003cp\u003eSee how fine it works on this Ford Axle in the Video in the Product Videos tab!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eService Procedures\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003e5\/8\"ID\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eAvailable Kits\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eRemoving Seals\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eReplacing Seals\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003e4x4 Tech Publications\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eService Procedures \u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace your \u003ca href=\"\/products\/40244-qu40244-inner-axle-shaft-oil-seal-with-slinger-ford-dana-50-60-gm-dana-super-70\" target=\"_blank\"\u003eQU40244\u003c\/a\u003e Inner Axle Shaft Seals. For \u003cstrong\u003eFord 1999-2004 Super Duty®\u003c\/strong\u003e, please refer to these 4x4 Tech Publications for service procedures: \u003cbr\u003e\u003ca href=\"\/products\/164643-tsb4643-inner-axle-seal-replacement-tech-service-bulletin\" target=\"_blank\"\u003eTSB4643\u003c\/a\u003e Includes 5 pages of Step-by-Step procedures with 17 full-color photographs. Covers axle shaft removal, inner axle seal replacement, axle shaft reassembly, differential oil specs, differential gear backlash, torque specs and wrench sizes for fasteners. Explains in text and photos how to change the Inner Axle Shaft Oil Seals located next to the differential. Includes detailed axle shaft oil seal replacement procedures, tool recommendations, and torque specifications that you need to correctly perform inner seal replacement plus check the gear backlash on your Ford Excursion or 1999-2004 Ford F250, F350, F450, or F550 Super Duty® 4x4 Dana Spicer Model 50 or Model 60 front axle. \u003cem\u003e*Note: The \u003ca href=\"\/products\/164643-tsb4643-inner-axle-seal-replacement-tech-service-bulletin\" target=\"_blank\"\u003eTSB4643\u003c\/a\u003e only applies specifically to Ford Excursion and 1999-2004 Super Duty®. For 2005 and newer Super Duty trucks, Inner Seal Replacement is identical. The disassembly and reassembly are different as far as the hub and rotors.\u003c\/em\u003e\u003cbr\u003e\u003ca href=\"\/products\/774637-tm4637-front-axle-tech-manual-for-excursion-1999-2004-super-duty\" target=\"_blank\"\u003eTM4637\u003c\/a\u003e Front Axle Tech Manual for Ford Excursion and 1999-2004 Super Duty is a 17 page, color illustrated, step-by-step printed shop repair manual that includes our four Tech Service Bulletins \u003cstrong\u003eplus Front Axle Exploded Views\u003c\/strong\u003e. \u003ca href=\"\/products\/774637-tm4637-front-axle-tech-manual-for-excursion-1999-2004-super-duty\" target=\"_blank\"\u003eTM4637\u003c\/a\u003e covers: Front Hub Service (\u003ca href=\"\/products\/4594-tsb4594-1999-2004-sd-excursion-front-hub-tech-service-bulletin\" target=\"_blank\"\u003eTSB4594\u003c\/a\u003e), Axle Shaft Service (\u003ca href=\"\/products\/554610-tsb4610-excursion-and-1999-2004-super-duty-front-axle-shaft-service\" target=\"_blank\"\u003eTSB4610\u003c\/a\u003e), Ball Joint Service (\u003ca href=\"\/products\/4591-tsb4591-4x4-ball-joint-replacement-tech-service-bulletin-for-ford\" target=\"_blank\"\u003eTSB4591\u003c\/a\u003e), and Inner Axle Seal Replacement Service (\u003ca href=\"\/products\/164643-tsb4643-inner-axle-seal-replacement-tech-service-bulletin\" target=\"_blank\"\u003eTSB4643\u003c\/a\u003e), including torque specs all in one manual.\u003cbr\u003e\u003ca href=\"\/products\/554688-tm4688-ford-super-duty-excursion-4x4-front-axle-shop-manual\" target=\"_blank\"\u003eTM4688\u003c\/a\u003e 4x4 Hub, Axle Shaft, Ball Joint, and Axle Shaft Seal Service Manual includes 76 full color printed tech pages with precise and detailed service instructions, plus a color photo for every step. (Includes all info in \u003ca href=\"\/products\/774637-tm4637-front-axle-tech-manual-for-excursion-1999-2004-super-duty\" target=\"_blank\"\u003eTM4637\u003c\/a\u003e.) Close to 400 color photographs, \u003cstrong\u003ecolor Exploded Views\u003c\/strong\u003e and Parts Guide. Comprehensive service information for replacing Front Axle Shaft Oil Seals, Axle Universal Joints, Ball Joints, Knuckle Seals, Axle Shaft Needle Bearings, Wheel Hubs, and Hub locks. Also covers basic Front Brake Service. Additionally includes complete torque specs, and tool recommendations.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e 5\/8\"ID\u003c\/strong\u003e\u003cbr\u003eQT1130 Thrust Plate fits against Differential Bore Face when pressing in opposite axle seal on axles without Central Axle Disconnect. (All Thrust Plates have 5\/8\" ID center holes.)\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Available Kits\u003c\/strong\u003e\u003cbr\u003eQT1130 Dana 60 Thrust Plate is a component tool of \u003ca href=\"\/products\/4644-qk4644-front-inner-axle-seal-and-tool-kit-for-ford-dana-60-super-60\" target=\"_blank\"\u003eQK4644\u003c\/a\u003e, \u003ca href=\"\/products\/884644-ts4644-dana-60-adjustable-depth-inner-axle-seal-installer-tool-set\" target=\"_blank\"\u003eTS4644\u003c\/a\u003e, \u003ca href=\"\/products\/4807-qk4807-depth-controlled-ford-dana-60-inner-axle-seal-and-tool-kit\" target=\"_blank\"\u003eQK4807\u003c\/a\u003e, \u003ca href=\"\/products\/994807-ts4807-fixed-depth-ford-dana-60-s60-inner-axle-seal-installer-tool-set\" target=\"_blank\"\u003eTS4807\u003c\/a\u003e, \u003ca href=\"\/products\/4983-qk4983-universal-dana-60-front-inner-axle-seal-and-tool-kit\" target=\"_blank\"\u003eQK4983\u003c\/a\u003e, \u003ca href=\"\/products\/774983-ts4983-axle-seal-installer-tool-set-for-most-dana-60-front-axles\" target=\"_blank\"\u003eTS4983\u003c\/a\u003e, \u003ca href=\"\/products\/4656-qk4656-adjustable-depth-dana-60-front-inner-axle-tool-and-seal-kit\" target=\"_blank\"\u003eQK4656\u003c\/a\u003e, \u003ca href=\"\/products\/884656-ts4656-dana-60-adjustable-depth-inner-axle-seal-tool-set\" target=\"_blank\"\u003eTS4656\u003c\/a\u003e, \u003ca href=\"\/products\/4867-qk4867-fixed-depth-1975-1997-dana-60-inner-axle-seal-kit\" target=\"_blank\"\u003eQK4867\u003c\/a\u003e, \u003ca href=\"\/products\/884867-ts4867-dana-60-fixed-depth-inner-axle-seal-tool-set\" target=\"_blank\"\u003eTS4867\u003c\/a\u003e Kits and more.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Removing Seals\u003c\/strong\u003e\u003cbr\u003eOnce the axle is disassembled, the old seals can be easily removed with our \u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Seal Remover Tool Set or another suitable tool such as a length of sturdy pipe that will fit inside the axle tube and oil guide. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly. For 1999-2004 vehicles, \u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e is made it fit through \u003ca href=\"\/products\/20039-qu20039-f250-f350-excursion-ford-inner-axle-shaft-guide\" target=\"_blank\"\u003eQU20039\u003c\/a\u003e Plastic Axle Shaft Guides which are located in the axle tubes just outboard of the inner axle shaft oil seals.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Replacing Seals\u003c\/strong\u003e\u003cbr\u003eWhen replacing your inner axle seals, ALWAYS inspect your Ball Joints, Axle Universal Joints, Differential Bearings, Outer Axle Shaft Support Bearing, and Wheel Hubs for wear or damage. The extra time needed to replace these components is minimal since you already have the axle apart to do the axle seals. Also, the large diameter seals on each outer axle shaft are not reusable and must be replaced with a new one using a special tool to prevent water infiltration and\/or vacuum loss.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e 4x4 Tech Publications\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40244-qu40244-inner-axle-shaft-oil-seal-with-slinger-ford-dana-50-60-gm-dana-super-70\" target=\"_blank\"\u003eQU40244\u003c\/a\u003e is item 35 in the Differential Parts Full Color Exploded View that is included in these 4x4 Tech Publications for Ford Excursion and 1999-2004 Super Duty®: \u003ca href=\"\/products\/774637-tm4637-front-axle-tech-manual-for-excursion-1999-2004-super-duty\" target=\"_blank\"\u003eTM4637\u003c\/a\u003e, and \u003ca href=\"\/products\/554688-tm4688-ford-super-duty-excursion-4x4-front-axle-shop-manual\" target=\"_blank\"\u003eTM4688\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e \u003cbr\u003eK30, K35, K3500 V3500: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1991\u003cbr\u003eMilitary CUCV: 1984, 1985, 1986, 1987, 1988\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW300: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1975\u003cbr\u003eW600: 1974, 1975, 1976, 1977, 1978\u003cbr\u003eW300, W350: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eW250 with Cummins Diesel: 1989, 1990, 1992, 1993\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eFord:\u003c\/strong\u003e \u003cbr\u003eF-250 Heavy Duty, F-350: 1978, 1979\u003cbr\u003eF-350: 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003cbr\u003eF-350: 1992, 1993, 1994, 1995, 1996, 1997\u003cbr\u003eF-250, F-350SRW (only those with Model 60 axle): 2002, 2003, 2004\u003cbr\u003eF350DRW, F-450, F550: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eIHC:\u003c\/strong\u003e \u003cbr\u003e1300: 1968.5, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e1600: 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1300 Camper Special: 1975\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656218452045,"sku":"1130","price":41.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt1130_3578_1600__19798_21552__69556.1707824012.1280.1280.png?v=1786724928"},{"product_id":"4765-qa4765-11-piece-king-pin-shim-kit-dana-44hd-dana-60-dana-70-axles","title":"QA4765 11 Piece King Pin Shim Kit - Dana 44HD, Dana 60, Dana 70 Axles","description":"\u003cp\u003e\u003cstrong\u003e QA4765 Dana 44HD, Dana 60, Dana 70 Closed Knuckle Shim Kit\u003c\/strong\u003e for 3\/4 ton to 1-1\/2 ton 4x4 trucks with Dana 44HD, Dana 60, or Dana 70 closed knuckle front axles with 12 Bolt Ball Seals. Kit includes 11 shims total, actual mix may vary, but typically, this Kit has (2) .003\", (4) .005\", (4) .010\", and (1) .030\" shims. Thicknesses are approximate. USA Made. Order 2 Kits per axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eUsing Shims\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eBefore Installing\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUsing Shims\u003c\/strong\u003e\u003cbr\u003e Shims are used between the King Pin Caps and Steering Knuckles to set your Knuckle Bearing\/Bushing turning preload. More shims decreases preload, less shims increases preload.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBefore Installing\u003c\/strong\u003e\u003cbr\u003e King Pin Caps are shimmed to put the specified turning preload on the bearings. The amount of turning preload varies by vehicle and year, but the value is measured by a beam or dial type torque wrench (refer to the vehicle manufacturer Service Manual for your specific model specification). Too loose can cause poor steering or \"Death Wobble\", too tight will lead to rapid bearing failure, broken parts, and possible steering loss.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChevrolet\/GMC:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003e K20\/K25: 1963, 1964, 1965, 1966, 1967, 1968, 1969 \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003e W200: 1969, 1970 \u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e W300: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e W600: 1974, 1975, 1976, 1977, 1978 \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003eF-250 with Heavy-Duty Model 44 Front Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e F-250 Crew Cab: 1974, 1975 \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e200, 1200 with Heavy-Duty Model 44 Front Axle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e300, 1300: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e1600: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1984, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJeep:\u003cbr\u003e Closed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003e M715, M725, M726 Military 1-1\/4 ton: 1967, 1968, 1969\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656275042381,"sku":"4765","price":54.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4765_2__83438_7387__52612.1707826919.1280.1280.jpg?v=1786720541"},{"product_id":"4862-ts4862-inner-axle-remover-set","title":"TS4862 Inner Axle Remover Set","description":"\u003cp\u003e\u003cstrong\u003eTS4862 Front Axle Inner Oil Seal Remover Set for AAM 925 and Most Dana 60 Front Axles\u003c\/strong\u003e is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube inside diameters of 2\" or larger and axle shaft seal inside diameters of 1-3\/4\" or smaller. This handy tool knocks out those tricky inner axle shaft seals in a flash! In addition, our space saving two piece rod threads together for removing the long side seal. Use just the long rod for knocking out the short side seal. Applications include 2003-2018 Dodge RAM AAM 925 Front Axle and Dana 60 Front axles without CAD through the 1997 model year plus 2005-up Ford Super Duty Dana Super 60 Front Axles. Kit includes \u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" rel=\"noopener\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e drive rod, \u003ca href=\"\/products\/1151-qt1151-short-extension-drive-rod-for-inner-axle-seal-removal\" rel=\"noopener\" target=\"_blank\"\u003eQT1151\u003c\/a\u003e extension rod, \u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" rel=\"noopener\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e seal remover, and 2 \u003ca href=\"\/products\/95007-qu95007-3-4-uss-grade-8-hex-nut\" rel=\"noopener\" target=\"_blank\"\u003eQU95007\u003c\/a\u003e Grade 8 jam nuts. Both \u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" rel=\"noopener\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e and \u003ca href=\"\/products\/1151-qt1151-short-extension-drive-rod-for-inner-axle-seal-removal\" rel=\"noopener\" target=\"_blank\"\u003eQT1151\u003c\/a\u003e are made from U.S. produced 1.25\" diameter steel and have wrench flats machined in the shaft. Rods, Remover, and Nuts are USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eInner Axle Seals\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eSeal Installation\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003e\u003cstrong\u003eAvailable Attachments\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003e Front Axle Shaft Oil Seal Remover Tool Sets \u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInner Axle Seals \u003c\/strong\u003e\u003cbr\u003eMost inner axle seals are located right next to the differential and are impossible to replace without disassembling the axle up to and including the differential. Once everything except the pinion gear is removed, you drive the seals inward until they drop into the housing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Seal Installation\u003c\/strong\u003e\u003cbr\u003eOnce the seals are removed, you need to clean any dirt, grit or crud out of the diff housing and axle tubes. After that, you can install your new seals. Seal installation is best done with our tooling made for your specific application. Sometimes you can get by with makeshift installers you cobble together, but in most cases, using makeshift tools just guarantees you get to do the job all over again.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Available Attachments\u003c\/strong\u003e\u003cbr\u003eOur currently available attachments are:\u003cbr\u003e\u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" rel=\"noopener\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e: Fits axle tube inside diameters of 1.75\" and larger. Max seal ID with rubber lip seals is 1.5\", max seal diameter with oil bath type seal is 1-9\/16\" (used on Ford Excursion and Super Duty® Model 50 and 60 monobeam axles from 1999 to 2004). This remover fits most Model 30, Model 44, and GM 10 Bolt front axles. The outside diameter is made to fit through the inner plastic axle guides used on 1999-2004 Ford Super Duty and 2000-2005 Ford Excursion.\u003cbr\u003e\u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" rel=\"noopener\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e: Fits axle tube inside diameters of 2.00\" and larger. Max seal ID 1-3\/4\". This remover fits most Model Model 44, Model 50, Model 60, Model 61, Model 70, AAM 925, and GM 10 Bolt front axles with 3\" or larger outside diameter axle tubes.\u003cbr\u003e\u003ca href=\"\/products\/1216-qt1216-2-25-axle-seal-remover\" rel=\"noopener\" target=\"_blank\"\u003eQT1216\u003c\/a\u003e: Fits axle tube inside diameters of 2.25\" and larger. Max seal ID 2\". This remover is primarily made to remove the large bore, right side seal on 2000-2002 Dodge Ram 2500 and Ram 3500 trucks with vacuum controlled Central Axle Disconnect (CAD). It will also work on all to remove the left seals on the same model trucks, plus either seal on all 2002 and newer Dodge Ram 2500 and Ram 3500 models and all 2005 and newer Ford Super Duty® F-250, F-350, F450, and F-550 4x4s.\u003cbr\u003e\u003cstrong\u003eFor Smaller Axles\u003c\/strong\u003e: For axle tube diameters between 1.50\" and 1.75\", you just use \u003ca href=\"\/products\/95007-qu95007-3-4-uss-grade-8-hex-nut\" rel=\"noopener\" target=\"_blank\"\u003eQU95007\u003c\/a\u003e nut as the remover.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eFront Axle Shaft Oil Seal Remover Tool Sets\u003c\/strong\u003e\u003cbr\u003eOur Front Axle Shaft Oil Seal Remover Tool Sets are:\u003cbr\u003e\u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" rel=\"noopener\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e: Includes TS4563 Rod Assembly and \u003ca href=\"\/products\/1144-qt1144-1-3-4-size-front-axle-shaft-oil-seal-remover\" rel=\"noopener\" target=\"_blank\"\u003eQT1144\u003c\/a\u003e Remover (Most smaller axles plus Ford Excursion and 1999-2004 Super Duty®)\u003cbr\u003e\u003ca href=\"\/products\/1184-ts1184-front-axle-shaft-oil-seal-remover-set-for-dodge-ram-with-cad\" rel=\"noopener\" target=\"_blank\"\u003eTS1184\u003c\/a\u003e: Includes \u003ca href=\"\/products\/1145-qt1145-long-driver-handle-for-removing-inner-axle-seals\" rel=\"noopener\" target=\"_blank\"\u003eQT1145\u003c\/a\u003e Rod, QU95007 Nut, and \u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" rel=\"noopener\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e Remover (Specific Kit for most Dodge with CAD)\u003cbr\u003e\u003ca href=\"\/products\/4862-ts4862-inner-axle-remover-set\" rel=\"noopener\" target=\"_blank\"\u003eTS4862\u003c\/a\u003e: Includes TS4563 Rod Assembly and \u003ca href=\"\/products\/1214-qt1214-2-front-axle-shaft-oil-seal-remover\" rel=\"noopener\" target=\"_blank\"\u003eQT1214\u003c\/a\u003e Remover (Most larger axles except 2000-2002 CAD equipped Ram 2500 and Ram 3500 or Ford Excursion and 1999-2004 Super Duty®)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003c\/strong\u003e \u003cbr\u003eK30, K35, K3500, V3500 Dana 60 Front Axle: 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge and Ram:\u003c\/strong\u003e\u003cbr\u003eW250, W350 with Dana 60 or Dana 61 Front Axles: 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993\u003cbr\u003eRam 2500, Ram 3500: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003cbr\u003eRam 1500 with Mega Cab: 2004, 2005, 2006, 2007, 2008, 2009, 2010\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eF250 with optional Dana 60 Front Axle: 1978, 1979\u003cbr\u003eF350: 1979\u003cbr\u003eF350: 1985.5, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41656288477261,"sku":"4862","price":134.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/ts4862__74783_14229__26212.1707827768.1280.1280.jpg?v=1786096401"},{"product_id":"4872-qk4872-dana-44-axle-seal-kit-with-adjustable-depth-axle-seal-tool-set","title":"QK4872 Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set","description":"\u003cdiv class=\"col-md-8\"\u003e \u003cp\u003e\u003cstrong\u003eQK4872 Dana 44 Axle Seal Kit with Adjustable Depth Axle Seal Tool Set\u003c\/strong\u003e Quickly and easily installs \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seals in 1950's to 1980's vintage Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with Dana 44 front axles. Our unique installer design will press in new your Inner Axle Seals without damage because the CNC Precision Machined Installation Tool cups the seal so force is only applied on the steel seal shell. Axle Shafts worn or rusty? No problem! Our Install Tool allows you to install either or both Inner Axle Seals to a variable depth to miss grooves worn in your inner axle shafts. USA Made.\u003c\/p\u003e \u003cp\u003eAlso See \u003ca href=\"\/products\/994872-ts4872-dana-44-adjustable-depth-inner-axle-seal-tool-set\" target=\"_blank\"\u003eTS4872\u003c\/a\u003e Tool Set only, or See \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e for Fixed Depth Option.\u003c\/p\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eMust be Removed\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eSee Article\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eAdjustable Depth\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eUse Correct Seals\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eRemoval of Old Seals\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eEarly Dana 44 Axles\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eQK4872 Inner Axle Seal Installation Kit Include:\u003cbr\u003e(2) \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Inner Axle Seals\u003cbr\u003e\u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Model 44 Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/1189-qt1189-front-inner-axle-shaft-seal-press-screw-assembly\" target=\"_blank\"\u003eQT1189\u003c\/a\u003e Model 44 Press Screw Assembly\u003cbr\u003e\u003ca href=\"\/products\/1161-qt1161-seal-installer-thrust-plate-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1161\u003c\/a\u003e Model 44 Specific Thrust Plate\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMust be Removed\u003c\/strong\u003e\u003cbr\u003eYour brakes, wheel hubs, axle shafts, and differential must be removed from the housing to replace your \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e inner axle shaft seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSee Article\u003c\/strong\u003e\u003cbr\u003eThe inner axle seals used on Chevy, Dodge, Ford, GMC, IHC, and Jeep closed and open knuckle Dana Model 44 Front Axles will vary by year and model. \u003ca href=\"\/products\/4933-qk4933-dana-44-front-inner-axle-seal-and-install-tool-kit\"\u003eSee Article.\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAdjustable Depth\u003c\/strong\u003e\u003cbr\u003eQK4872 uses \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e application specific adjustable depth installer which allows you to offset the seal to miss a worn spot on the axle shaft. This is a valuable feature, however, YOU have to determine the final depth of the seal. It is unlikely, but possible to seat the seal too deep with \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e installer which can put the seal beyond the machined seal surface of the axle shaft. We also offer \u003ca href=\"\/products\/664871-qk4871-1955-1988-dana-44-fixed-depth-axle-seal-kit\" target=\"_blank\"\u003eQK4871\u003c\/a\u003e Seal Installer Set which uses \u003ca href=\"\/products\/1041-qt1041-inner-axle-shaft-seal-installer-with-depth-stop-for-dana-44-front-axles\" target=\"_blank\"\u003eQT1041\u003c\/a\u003e specific Depth Stop Seal Installer which has a raised flange on it that will stop against the axle bore face when the seal is at the correct depth. This is a more fool-proof setup than QK4872, but it is a little more expensive and you can not vary the seal depth to miss a groove worn in the axle shaft.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse Correct Seals\u003c\/strong\u003e\u003cbr\u003eDue to the way we have to make the tool to function, your Seal Installer and Seal MUST match. \u003ca href=\"\/products\/1165-qt1165-inner-front-axle-shaft-oil-seal-installer-for-gm-10-bolt-dana-44\" target=\"_blank\"\u003eQT1165\u003c\/a\u003e Installer will only work with original equipment design, CR manufactured seals such as our \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e. Seals manufactured by other seal manufacturers WILL NOT WORK WITH THIS INSTALLER!!!!\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eRemoval of Old Seals\u003c\/strong\u003e\u003cbr\u003eOnce the axle is disassembled, the old seals can be easily removed with our \u003ca href=\"\/products\/4647-qk4647-4x4-front-inner-axle-seal-remover-tool-set\" target=\"_blank\"\u003eQK4647\u003c\/a\u003e Seal Remover Tool Set or other suitable tool such as a length of sturdy pipe that will fit inside the axle tube. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eEarly Dana 44 Axles\u003c\/strong\u003e\u003cbr\u003eMost closed knuckle and early production Dana 44 axles used a two piece axle seal and guide set that had \u003ca href=\"\/products\/42015-qu42015-inner-front-axle-shaft-seal-for-dana-44-and-dana-60\" target=\"_blank\"\u003eQU42015\u003c\/a\u003e seal and a separate sheet metal guide. \u003ca href=\"\/products\/40055-qu40055-inner-axle-seal-for-gm-10-bolt-and-many-dana-44-front-axles\" target=\"_blank\"\u003eQU40055\u003c\/a\u003e Seal replaces both parts.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevy\/GMC:\u003c\/strong\u003e\u003cbr\u003eAll: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eK5, K10: 1973, 1974, 1975, 1976, 1977\u003cbr\u003eK20: 1972, 1973, 1974, 1975, 1976, 1977\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003e\u003c\/strong\u003eAll F100, F250: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250: 1967, 1968, 1969\u003cbr\u003eF100, F150, F250: 1975, 1976, 1977\u003cbr\u003eBronco: 1976, 1977\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003e\u003c\/strong\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003eW100, W200: 1972½, 1973, 1974, 1975, 1976, 1977\u003cbr\u003eRamcharger: 1974, 1975, 1976, 1977\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIHC: \u003cbr\u003e\u003c\/strong\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003eScout II: 1973, 1974, 1975, 1976, 1977, 1978\u003cbr\u003e1100, 1200 (except 1200 Heavy Duty): 1971½, 1972, 1973, 1974, 1975\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJeep:\u003cbr\u003e\u003c\/strong\u003eAll Dana 44 Closed Knuckle: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003cbr\u003eCherokee, Wagoneer, J10, J20: 1974, 1975, 1976, 1977\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656290082893,"sku":"4872","price":194.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4872_2107_1600__52571_21188__25727.1708622040.1280.1280.png?v=1785231370"},{"product_id":"4911-tk4911-master-wheel-bearing-seal-tools-kit-for-vintage-dana-30-44","title":"TK4911 Master Wheel Bearing, Seal, Tools Kit for Vintage Dana 30\/44","description":"\u003cp\u003e\u003cstrong\u003eTK4911 \u003cem\u003eTorque King\u003c\/em\u003e® Master Wheel Bearing and Seal Kit with Tools for Vintage Dana 30 and Dana 44 Front Axles\u003c\/strong\u003e fits many 1959-1976 Chevy, Dodge, Ford, GMC, IHC, and Jeep with with either Dana 30 or Dana 44 axles, Internally Splined Wheel Hubs, and Drum Brakes. Also fits 1971 GM 1\/2 ton 4x4s with Disc Brakes. TK4911 Master Kit includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer and Driver Handle.\u003c\/p\u003e \u003cp\u003eDon't Need the Tools? See: \u003ca href=\"\/products\/4912-tk4912-torque-king-wheel-bearing-and-seal-kit-for-dana-30-dana-44\" target=\"_blank\"\u003eTK4912 \u003c\/a\u003eParts Only Kit\u003cbr\u003eNeed just the Bearings? See: \u003ca href=\"\/products\/134905-tk4905-torque-king-wheel-bearing-kit\" target=\"_blank\"\u003eTK4905\u003c\/a\u003e Bearings Only Kit\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eLubricate\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eFits \u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003e1972 GM\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eTK4911 Master Kit includes:\u003cbr\u003e(2) \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003eWheel Seal\u003cbr\u003e(2) \u003ca href=\"\/products\/50578-qu50578-timken-tapered-wheel-or-diff-bearing\" target=\"_blank\"\u003eQU50578 \u003c\/a\u003eTimken Inner Wheel Bearing\u003cbr\u003e(2) \u003ca href=\"\/products\/50577-qu50577-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50577 \u003c\/a\u003eTimken Inner Wheel Bearing Cup\u003cbr\u003e(2) \u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447 \u003c\/a\u003eTimken Outer Wheel Bearing Cup\u003cbr\u003e(2) \u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken Outer Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/1802-qt1802-bearing-cup-installer-2-7-8-approximate-outside-diameter\" target=\"_blank\"\u003eQT1802 \u003c\/a\u003eOuter Wheel Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1803-qt1803-front-inner-wheel-taper-bearing-cup-installer\" target=\"_blank\"\u003eQT1803 \u003c\/a\u003eInner Wheel Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/1504-qt1504-dana-30-dana-44-and-gm-10-bolt-front-wheel-seal-installer\" target=\"_blank\"\u003eQT1504 \u003c\/a\u003eWheel Seal Installer\u003cbr\u003e\u003ca href=\"\/products\/1100-qt1100-1-x-8-driver-handle-for-installers-removers-with-5-8-tip\"\u003eQT1100 \u003c\/a\u003eDriver Handle\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubricate\u003c\/strong\u003e\u003cbr\u003eYour New Wheel Bearings must be packed and the wheel seal lip lubricated with NLGI #2 Grease before placing these parts in service.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eTK4911 fits 1960-1971 Chevy or GMC 1\/2 ton, 1969-1974 Dodge W100, 1959-1969.5 Ford F100, F250 (standard axle), 1966-1969.5 Ford Bronco, 1964-1973 IHC 1100 1\/2 ton, and 1974-1976 Front Drum Brake equipped Jeep Wagoneer, Cherokee, and J10 truck. \u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1972 GM\u003c\/strong\u003e\u003cbr\u003eSome aftermarket sources list \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003eseal being used as late as 1972, however, my 1972 era Chevy parts book only lists it up to 1971. Disc brakes became standard in 1971 which means hub temperatures are higher than they usually are with drum brakes. Effective with the 1972 model year, the simple \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003eseal was replaced by \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003edouble lip spring seal. My 1967-1972 GMC parts book (which was printed in 1976) shows \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eas the seal to use for both 1971 and 1972. I always installed \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eseal in all GM 1\/2 ton disc brake hubs including 1971. For drum brake applications, I used QU50654 due to a thickness difference that can lead to interference problems with some drum brake hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for TK4911 Master Wheel Bearing\/Seal\/Tools Kit:\u003cbr\u003e\u003ca href=\"\/products\/20267-tka20267-torque-king-dana-44-closed-knuckle-front-spindle\" target=\"_blank\"\u003eTKA20267 \u003c\/a\u003eSpindle for Closed Knuckle Axles\u003cbr\u003e\u003ca href=\"\/products\/40630-qu40630-dana-44-bare-front-spindle-for-open-knuckle-drum-brake-axles-reference-only\" target=\"_blank\"\u003eQU40630 \u003c\/a\u003eSpindle for 1966-1972 Ford and 1969-1970 GM Open Knuckle Axles with Drum Brakes\u003cbr\u003e\u003ca href=\"\/products\/5542103-qu42103u-used-front-spindle-for-1972-1974-dodge-w100-dana-44\"\u003eQU30197U \u003c\/a\u003eSpindle for 1971 GM with Disc Brakes\u003cbr\u003e\u003ca href=\"\/products\/5542103-qu42103u-used-front-spindle-for-1972-1974-dodge-w100-dana-44\" target=\"_blank\"\u003eQU42103U \u003c\/a\u003eUsed Spindle for 1972-1974 Dodge W100\u003cbr\u003e\u003ca href=\"\/products\/9942008-tk42008-torque-king-bare-front-spindle-for-1973-1976-ford-jeep\" target=\"_blank\"\u003eTK42008 \u003c\/a\u003eSpindle for Jeep\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003eDouble Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003ePyroplex Synthetic Grease\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer\u003cbr\u003e\u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i \u003c\/a\u003eImport Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025 \u003c\/a\u003eUniversal Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003ePyroplex ES Synthetic Grease\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003cbr\u003e \u003c\/strong\u003eK5 Blazer, K5 Jimmy, 1\/2 ton Pickups with Drum Front Brakes: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003e 1971 Can also use for 1971 Models with Disc Brakes, instead of TK4711 or TK4746\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100 with Dana 44 Closed Knuckle Front Axle: 1969, 1970, 1971\u003cbr\u003eW100 with Drum Brake Dana 44 Front Axle: 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco Dana 30 Axle: 1966, 1967, 1968\u003cbr\u003eBronco Dana 30 Axle up to serial #F30000: 1969.5\u003cbr\u003eF100 closed knuckle Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF100 open knuckle Dana 44: 1966, 1967, 1968\u003cbr\u003eF100 open knuckle Dana 44 up to serial number F70000: 1969\u003cbr\u003eF-250 closed knuckle Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003eF-250 closed knuckle Dana 44 up to serial number F70000: 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1100 with Front Drum Brakes: 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eWagoneer, Cherokee, J10 with Drum Front Brakes: 1974, 1975, 1976\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656296636493,"sku":"4911","price":289.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/4695625389479917567_49963__52154_677__24053.1707828231.1280.1280.jpg?v=1785232007"},{"product_id":"4912-tk4912-torque-king-wheel-bearing-and-seal-kit-for-dana-30-dana-44","title":"TK4912 Torque King® Wheel Bearing and Seal Kit for Dana 30 Dana 44","description":"\u003cp\u003e\u003cstrong\u003eTK4912 \u003cem\u003eTorque King\u003c\/em\u003e® Wheel Bearing and Seal Kit for Vintage Dana 30 and Dana 44 Front Axles\u003c\/strong\u003e fits many 1959-1976 Chevy, Dodge, Ford, GMC, IHC, and Jeep with with either Dana 30 or Dana 44 axles, Internally Splined Wheel Hubs, and Drum Brakes. Also fits 1971 GM 1\/2 ton 4x4s with Disc Brakes. TK4912 Parts Only Kit includes 4 Timken® Bearings with Bearing Cups and 2 Wheel Seals.\u003c\/p\u003e \u003cp\u003eAlso Need the Tools? See: \u003ca href=\"\/products\/4911-tk4911-master-wheel-bearing-seal-tools-kit-for-vintage-dana-30-44\" target=\"_blank\"\u003eTK4911 \u003c\/a\u003eMaster Wheel Bearing\/Seal\/Tools Kit\u003cbr\u003eNeed just the Bearings? See: \u003ca href=\"\/products\/134905-tk4905-torque-king-wheel-bearing-kit\" target=\"_blank\"\u003eTK4905 \u003c\/a\u003eBearings Only Kit\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eLubricate\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eFits \u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003e1972 GM\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eTK4912 Parts Kit includes:\u003cbr\u003e(2) \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003eWheel Seal\u003cbr\u003e(2) \u003ca href=\"\/products\/50578-qu50578-timken-tapered-wheel-or-diff-bearing\" target=\"_blank\"\u003eQU50578 \u003c\/a\u003eTimken Inner Wheel Bearing\u003cbr\u003e(2) \u003ca href=\"\/products\/50577-qu50577-timken-inner-wheel-bearing-cup\" target=\"_blank\"\u003eQU50577 \u003c\/a\u003eTimken Inner Wheel Bearing Cup\u003cbr\u003e(2) \u003ca href=\"\/products\/50447-qu50447-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50447 \u003c\/a\u003eTimken Outer Wheel Bearing Cup\u003cbr\u003e(2) \u003ca href=\"\/products\/50448-qu50448-timken-differential-wheel-bearing\" target=\"_blank\"\u003eQU50448 \u003c\/a\u003eTimken Outer Wheel Bearing\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubricate\u003c\/strong\u003e\u003cbr\u003eYour New Wheel Bearings must be packed and the wheel seal lip lubricated with NLGI #2 Grease before placing these parts in service.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eTK4912 fits 1960-1971 Chevy or GMC 1\/2 ton, 1969-1974 Dodge W100, 1959-1969.5 Ford F100, F250 (standard axle), 1966-1969.5 Ford Bronco, 1964-1973 IHC 1100 1\/2 ton, and 1974-1976 Front Drum Brake equipped Jeep Wagoneer, Cherokee, and J10 truck. \u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1972 GM\u003c\/strong\u003e\u003cbr\u003eSome aftermarket sources list \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003eseal being used as late as 1972, however, my 1972 era Chevy parts book only lists it up to 1971. Disc brakes became standard in 1971 which means hub temperatures are higher than they usually are with drum brakes. Effective with the 1972 model year, the simple \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003eseal was replaced by QU50091 double lip spring seal. My 1967-1972 GMC parts book (which was printed in 1976) shows \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eas the seal to use for both 1971 and 1972. I always installed \u003ca href=\"\/products\/50091-qu50091-front-wheel-seal-for-dana-44-gm-10-bolt-np435\" target=\"_blank\"\u003eQU50091 \u003c\/a\u003eseal in all GM 1\/2 ton disc brake hubs including 1971. For drum brake applications, I used \u003ca href=\"\/products\/50654-qu50654-front-wheel-seal-for-vintage-4x4-dana-front-axles\" target=\"_blank\"\u003eQU50654 \u003c\/a\u003edue to a thickness difference that can lead to interference problems with some drum brake hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for TK4912 Wheel Bearing\/Seal Kit:\u003cbr\u003e\u003ca href=\"\/products\/20267-tka20267-torque-king-dana-44-closed-knuckle-front-spindle\" target=\"_blank\"\u003eTKA20267 \u003c\/a\u003eSpindle for Closed Knuckle Axles\u003cbr\u003e\u003ca href=\"\/products\/40630-qu40630-dana-44-bare-front-spindle-for-open-knuckle-drum-brake-axles-reference-only\" target=\"_blank\"\u003eQU40630 \u003c\/a\u003eSpindle for 1966-1972 Ford and 1969-1970 GM Open Knuckle Axles with Drum Brakes\u003cbr\u003eQU30197 Spindle for 1971 GM with Disc Brakes (NO LONGER AVAILABLE)\u003cbr\u003e\u003ca href=\"\/products\/5542103-qu42103u-used-front-spindle-for-1972-1974-dodge-w100-dana-44\" target=\"_blank\"\u003eQU42103U \u003c\/a\u003eUsed Spindle for 1972-1974 Dodge W100\u003cbr\u003e\u003ca href=\"\/products\/9942008-tk42008-torque-king-bare-front-spindle-for-1973-1976-ford-jeep\" target=\"_blank\"\u003eTK42008 \u003c\/a\u003eSpindle for Jeep\u003cbr\u003e\u003ca href=\"\/products\/4727-qk4727-dana-30-dana-44-front-spindle-nut-kit-with-round-4-slot-1-5-8-thread-nuts\" target=\"_blank\"\u003eQK4727 \u003c\/a\u003eDouble Spindle Nut Kit\u003cbr\u003e\u003ca href=\"\/products\/5500-qt5500-wheel-bearing-packer-with-cover\" target=\"_blank\"\u003eQT5500 \u003c\/a\u003eWheel Bearing Packer\u003cbr\u003e\u003ca href=\"\/products\/991012-qt1012i-4-lug-4x4-front-spindle-nut-socket-for-dana-30-44-gm-10-bolt\" target=\"_blank\"\u003eQT1012i \u003c\/a\u003eImport Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/1025-qt1025-universal-4-lug-and-6-lug-spindle-hub-nut-socket\" target=\"_blank\"\u003eQT1025 \u003c\/a\u003eUniversal Spindle Nut Socket\u003cbr\u003e\u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018 \u003c\/a\u003ePyroplex ES Synthetic Grease\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevy and GMC:\u003cbr\u003e \u003c\/strong\u003eK5 Blazer, K5 Jimmy, 1\/2 ton Pickups with Drum Front Brakes: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970\u003cbr\u003e 1971 Can also use for 1971 Models with Disc Brakes, instead of TK4711 or TK4746\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100 with Dana 44 Closed Knuckle Front Axle: 1969, 1970, 1971\u003cbr\u003eW100 with Drum Brake Dana 44 Front Axle: 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cbr\u003eBronco Dana 30 Axle: 1966, 1967, 1968\u003cbr\u003eBronco Dana 30 Axle up to serial #F30000: 1969.5\u003cbr\u003eF100 closed knuckle Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF100 open knuckle Dana 44: 1966, 1967, 1968\u003cbr\u003eF100 open knuckle Dana 44 up to serial number F70000: 1969\u003cbr\u003eF-250 closed knuckle Dana 44: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003eF-250 closed knuckle Dana 44 up to serial number F70000: 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e1100 with Front Drum Brakes: 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eWagoneer, Cherokee, J10 with Drum Front Brakes: 1974, 1975, 1976\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656296865869,"sku":"4912","price":146.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk4912__25361_9687__96863.1707828252.1280.1280.jpg?v=1785231459"},{"product_id":"4918-qk4918-hub-service-kit-for-qu56018-warn-manual-hub-set","title":"QK4918 Hub Service Kit for QU56018 Warn Manual Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQK4918 Hub Service Kit\u003c\/strong\u003e for \u003ca href=\"\/products\/56018-qu56018-warn-9790-standard-lockout-hub-set\" target=\"_blank\"\u003eQU56018\u003c\/a\u003e Warn Manual Hub Set.\u003c\/p\u003e","brand":"Warn","offers":[{"title":"Default Title","offer_id":41656299847757,"sku":"4918","price":66.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4918_1600__41065.1721237300.1280.1280.png?v=1786089147"},{"product_id":"4924-tk4924-early-front-wheel-bearing-seal-gasket-kit-for-dana-44-axles","title":"TK4924 Early Front Wheel Bearing, Seal, \u0026 Gasket Kit for Dana 44 Axles","description":"\u003cp\u003e\u003cstrong\u003eTK4924 \u003cem\u003e Torque King\u003c\/em\u003e® Front Wheel Bearing, Seal, and Gasket Kit for Dana 44 Front Axles\u003c\/strong\u003e fit 1957 to 1968 Dodge W100 and W200 4x4 pickups with Dana 44 closed knuckle front axles. Also fits 1955-1968 IHC Dana 44 front axles with external mount type wheel hubs. TK4924 Master Kit includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, 2 Spindle Nut Lock Washers, and 2 Hub Gaskets.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eTK4924 Bearing \u0026amp; Seal Kit Includes:\u003cbr\u003e(2) \u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704\u003c\/a\u003e Front Wheel Seal\u003cbr\u003e(4) \u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702\u003c\/a\u003e Timken Wheel Bearing\u003cbr\u003e(4) \u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701\u003c\/a\u003e Timken Wheel Bearing Cup\u003cbr\u003e(2) \u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e Spindle Lock Washer\u003cbr\u003e(2) \u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Front Hub Gasket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100 and W200 4x4 pickups with Dana 44 Closed Knuckle Front Axles: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e \u003cbr\u003eDana 44 Front Axles with External Mount Type Wheel Hubs: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e\u003cbr\u003eDana 44 Front Axles with External Mount Type Wheel Hubs: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656301158477,"sku":"4924","price":429.98,"currency_code":"USD","in_stock":true}]},{"product_id":"4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late","title":"TK4926 Torque King® Front Wheel Bearing and Seal Kit Late","description":"\u003cp\u003e\u003cstrong\u003eTK4926 Torque King® Front Wheel Bearing and Seal Kit\u003c\/strong\u003e fits 1969 to 1974 Dodge and 1969-1973 Jeep Camper Special Dana 44 Front Axles with 1-3\/4\" thread hex spindle nuts and external mount type wheel hubs.\u003c\/p\u003e \u003cp\u003eNon-Stock Special Order. Please allow 4-10 day lead time to ship.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eIncludes\u003c\/a\u003e \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003eTK4926 includes these parts:\u003cbr\u003e2 \u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576 \u003c\/a\u003eBend over Tab Lockwasher\u003cbr\u003e2 \u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573 \u003c\/a\u003eTorque King® 6 Bolt Front Hub Gasket\u003cbr\u003e4 \u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701 \u003c\/a\u003eTimken Wheel Bearing Cup\u003cbr\u003e2 \u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702 \u003c\/a\u003eTimken Outer Wheel Bearing\u003cbr\u003e2 \u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703 \u003c\/a\u003eTimken Inner Wheel Bearing\u003cbr\u003e2 \u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704 \u003c\/a\u003eFront Wheel Seal\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW200 with Dana 44 Front Axles: 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003cbr\u003e\u003c\/strong\u003eJ4000, J4800 and Camper Special Dana 44 Front Axles with External Mount Type Wheel Hubs: 1969, 1970, 1971, 1972, 1973\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656301191245,"sku":"4926","price":419.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tk4926_2015_1600__06773_21174__21671.1707828458.1280.1280.png?v=1785229971"},{"product_id":"4936-qa4936-12-bolt-knuckle-ball-seal-kit-for-dana-44hd-60-70-front-axles","title":"QA4936 12 Bolt Knuckle Ball Seal Kit for Dana 44HD, 60, 70 Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQA4936 Replacement 12 Bolt Knuckle Ball Seal Kit for Dana Spicer Front Axles\u003c\/strong\u003e is for the heavy-duty Dana closed knuckle front axles in 1958-1979 3\/4 ton through 1-1\/2 ton 4x4s with Dana Spicer Model 44HD, Model 60, or Model 70 front drive axles with the large diameter knuckle ball. Kit includes split metal backed ball seal, felt wiper seal, upgraded stainless steel metal backing plates and 12 new serrated, flange head cap screws. Sold individually. \u003cstrong\u003eTwo kits required to service both sides\u003c\/strong\u003e of your front axle assembly. USA Made replacement parts.\u003c\/p\u003e \u003cp\u003e\u003cem\u003eNOTE: QA4936 replaces QU40189 100% Dana Ball Seal Kit which is out of production and no longer available. So far, we have been able to provide this kit for the now, at least, 40 year old vehicles.... \u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info?\u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note2\"\u003eUse\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note3\"\u003eInitial Lubrication\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note4\"\u003eLubricant\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eInstalling Seal Ring\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eInstalling Felt Wiper\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/40421-qu40421-knuckle-seal-for-12-bolt-steering-knuckles\"\u003eQU40421\u003c\/a\u003e Knuckle Seal\u003cbr\u003e\u003ca href=\"\/products\/40425-qu40425-outer-felt-wiper-seal-for-12-bolt-steering-knuckles\"\u003eQU40425\u003c\/a\u003e Felt Wiper Seal\u003cbr\u003e(2) \u003ca href=\"\/products\/40426-tk40426-seal-retainer-half-for-12-bolt-closed-knuckle-front-axles\"\u003eTK40426\u003c\/a\u003e Seal Retainer Half\u003cbr\u003e(12) \u003ca href=\"\/products\/40695-qu40695-knuckle-seal-bolt\"\u003eQU40695\u003c\/a\u003e Knuckle Seal Bolt\u003cbr\u003e\u003ca href=\"\/products\/994936-qa4936-qu40188-instructions\"\u003eQA4936 Instructions\u003c\/a\u003e (optional)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eUse\u003c\/strong\u003e\u003cbr\u003eDana Spicer axles were built with 2 sizes of closed steering knuckles. All Model 25. Model 27, and Model 30 closed knuckle axles use \u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e 8 Bolt Knuckle Seal as did standard duty Model 44 axles. Heavy-duty Model 44 axles have the bigger Knuckle Ball and use QU40189 or QA4936 12 Bolt Seal. All Dana Spicer Model 60 and Model 70 closed knuckle axles use QU40189 or QA4936.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInitial Lubrication\u003c\/strong\u003e\u003cbr\u003eBefore installing your new QU40189 or QA4936 Knuckle Seal, apply a thin coat of grease to the knuckle ball to provide initial lubrication for the Seal. I also like to put a little SAE 250 weight gear lube around the inner circumference of the felt wiper so after it soaks in it will reduce friction between the felt and ball.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubricant\u003c\/strong\u003e\u003cbr\u003eThe lubricant used in steering knuckles must be fairly thick, but still be able to flow a little bit. Straight gear lube will seep past the seal! We recommend our \u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eClosed Knuckle Lube\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstalling Seal Ring\u003c\/strong\u003e\u003cbr\u003eThe metal\/rubber seal ring is split so you can twist it open to clear the axle tube during installation. When you install the seal on the knuckle, place the split joint at the 12:00 o'clock position.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eInstalling Felt Wiper\u003c\/strong\u003e\u003cbr\u003eThe felt wiper needs to be cut before installation. Locate the cut at what will be the the 12:00 o'clock position when installed.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/4765-qa4765-11-piece-king-pin-shim-kit-dana-44hd-dana-60-dana-70-axles\" rel=\"noopener\" target=\"_blank\"\u003eQA4765\u003c\/a\u003e King Pin Shim Kit\u003cbr\u003e\u003ca href=\"\/products\/4618-qk4618-dana-44hd-dana-60-dana-70-large-closed-knuckle-bearing-kit\" rel=\"noopener\" target=\"_blank\"\u003eQK4618\u003c\/a\u003e\/\u003ca href=\"\/products\/50785-tk50785-large-king-pin-timken-bearing-kit\" rel=\"noopener\" target=\"_blank\"\u003eTK50785\u003c\/a\u003e Knuckle Bearing Kits for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/4616-qk4616-dana-44-60-70-large-closed-knuckle-bearing-and-bushing-kit\" rel=\"noopener\" target=\"_blank\"\u003eQK4616\u003c\/a\u003e Knuckle Bearing and Bushing Kit for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" rel=\"noopener\" target=\"_blank\"\u003eQU50601\u003c\/a\u003e King Pin Bearing Cup for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU50600\u003c\/a\u003e King Pin Bearing for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e Keyed Upper King Pin Bushing for Dana 44HD, Dana 60, Dana 70 Closed Knuckle Front Axles\u003cbr\u003e\u003ca href=\"\/products\/40395-qu40395-metal-hub-gasket-for-spicer-6-bolt-external-mount-hublocks\" rel=\"noopener\" target=\"_blank\"\u003eQU40395\u003c\/a\u003e 6 Bolt Inner Metal Hub Gasket for 3\/4 ton trucks with Dana Plastic Dial Factory Lockouts\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e 6 Bolt Hub Gasket for Chevy, Dodge, Ford and GM with External Mount Lockouts\u003cbr\u003e\u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\" rel=\"noopener\" target=\"_blank\"\u003eClosed Knuckle Lube\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" rel=\"noopener\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" rel=\"noopener\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" rel=\"noopener\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" rel=\"noopener\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevrolet\/GM:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003eK20\/K25: 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003eW200: 1963, 1964, 1665, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003eW300: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eW600: 1974, 1975, 1976, 1977, 1978\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFord:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003eF-250 with Heavy-Duty Model 44 Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003eF-250 Crew Cab: 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e200, 1200, 1210 with Heavy-Duty Model 44 Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e300, 1300, 1310, 200: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e1600: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep \u003cbr\u003eClosed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003eM715, M725, M726 Military 1-1\/4 ton: 1967, 1968, 1969\u003c\/p\u003e","brand":"Quad 4x4","offers":[{"title":"Default Title","offer_id":41656303353933,"sku":"4936","price":189.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QA4936_095824_clean__41462.1715194750.1280.1280.png?v=1785232306"},{"product_id":"4939-tka4939-11-piece-premium-steering-knuckle-shim-kit-dana-25-44-axles","title":"TKA4939 11 Piece Premium Steering Knuckle Shim Kit Dana 25-44 Axles","description":"\u003cp\u003e\u003cstrong\u003eTKA4939 Premium Torque King Knuckle Shim Kit for Dana Closed Knuckle and Ford Open Knuckle Front Axles\u003c\/strong\u003e TKA4939 fits all Dana 25-Dana 44 closed Knuckle Front Axles with 8 Bolt Ball Seals and 1966-197 Ford Dana 30. Dana 44 open knuckle front axles. Kit includes the four shim thicknesses that Dana used for setting precise knuckle rotating preload on 1941-1975 era Dana 25, Dana 27, Dana 30, and Dana 44 closed knuckle front axles in Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s.\u003cbr\u003eEach TKA4939 Shim Kit includes: \u003cbr\u003e(4) 0.003\", (3) 0.005\", (3) 0.010\", and (1) 0.030\" shims so you can precisely adjust your knuckle rotating preload to optimum specifications.\u003c\/p\u003e \u003cp\u003eFor Basic Knuckle Shim Kit, see \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eTKA4939 vs. QU40773\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eTurning Preload\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eTrapezoid Shims\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMeasure\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTKA4939 vs. QU40773\u003c\/strong\u003e\u003cbr\u003eDana originally used 0.003\", 0.005\", 0.010\", and 0.030\" shims to set steering knuckle rotating preload on closed knuckle front axles. Our TKA4939 includes those four sizes which can be used to create almost any required shim pack. Our \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e Kit is inexpensive, but it ONLY includes a single thickness of shims (0.007\" nominal). Used by itself, \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e can only create shim packs in 0.007\" increments which is too great for precise adjustment. If you are on a tight budget AND want to do a good job, I recommend you order 1 each TKA4939 and \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e Kits which will allow you to save money compared to 2 TKA4939 Kits, but still give you the flexibility to make any shim packs needed.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTurning Preload\u003c\/strong\u003e\u003cbr\u003eShims are used between the King Pin Caps and Steering Knuckles to set your Knuckle Bearing\/Bushing turning preload. More shims decreases preload, less shims increases preload. I like to install at least one shim under each bearing cap to act as a gasket. How the shims are distributed between upper and lower caps is up to you. Rotating preload is set by the COMBINED shim pack for each knuckle. If you need a total of 0.050\" shims for your left knuckle, you can split the 0.050\" total between the upper and lower caps as you wish. Most knuckles will require from 0.045\" to 0.065\" of shims. If you need over 0.75\" shims per side, something is probably worn or incorrectly installed.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTrapezoid Shims\u003c\/strong\u003e\u003cbr\u003eSome axles (mainly pickups after 1963) will use Upper King Pin Caps\/Steering Arms with Trapezoid shaped shims. For these axles also see \u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e Product Page. (You will still need either \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e or TKA4939 Kits for the other King Pins.)\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMeasure\u003c\/strong\u003e\u003cbr\u003eKing Pin Caps are shimmed to put the specified turning preload on the bearings. The amount of turning preload varies by vehicle and year but the value is measured by a beam or dial type torque wrench (refer to the vehicle manufacturer Service Manual for your specific model specification). Too loose can cause poor steering or \"Death Wobble\", too tight will lead to rapid bearing failure, broken parts, and possible steering loss.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for Knuckle Shim Kits:\u003cbr\u003e\u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e 8 Bolt Knuckle Ball Seal\u003cbr\u003e\u003ca href=\"\/products\/4617-qk4617-dana-axle-small-knuckle-bearing-and-shim-kit\" target=\"_blank\"\u003eQK4617\u003c\/a\u003e Knuckle Bearing Kit\u003cbr\u003e\u003ca href=\"\/products\/50784-tk50784-small-knuckle-king-pin-bearing-only-kit\" target=\"_blank\"\u003eTK50784\u003c\/a\u003e Torque King® Knuckle Bearing Only Kit\u003cbr\u003e\u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e Trapezoid Knuckle Shim\u003cbr\u003e\u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e Timken® Knuckle Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/8950628-qu50628-king-pin-or-knuckle-bearing-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU50628\u003c\/a\u003e Timken® Knuckle Bearing\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChevrolet\/GMC:\u003cbr\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e\u003cbr\u003eK10\/K15, K20\/K25: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003eClosed Knuckle Dana 25\u003c\/strong\u003e:\u003cbr\u003eGPW military: 1942, 1943, 1944, 1945\u003cbr\u003e\u003cstrong\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e:\u003cbr\u003eF-100: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966\u003cbr\u003eF-250 with standard Model 44 Front Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 27, 30, 44\u003c\/strong\u003e:\u003cbr\u003eScout: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e1\/2 ton and light 3\/4 ton: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003cbr\u003eClosed Knuckle Dana 25, 27, 30, and 44:\u003c\/strong\u003e\u003cbr\u003eMilitary models MB, M38, M38A1, M170: 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957\u003cbr\u003eAll civilian Jeeps: 1945, 1946, 1947, 1948, 1949, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eJeep J-Series full size 4x4s: 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStudebaker:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e:\u003cbr\u003e4x4 Pickups: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656303616077,"sku":"4939","price":54.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/tka4939clean__34759_8648__17747.1707828658.1280.1280.jpg?v=1786089115"},{"product_id":"4954-qk4954-hub-service-kit-for-qu51181-warn-premium-manual-hub-set","title":"QK4954 Hub Service Kit for QU51181 Warn Premium Manual Hub Set","description":"\u003cp\u003e\u003cstrong\u003eQK4954 Hub Service Kit\u003c\/strong\u003e for \u003ca href=\"\/products\/51181-qu51181-warn-20990-premium-hub-set-for-dana-30-dana-44-gm-10-bolt\" target=\"_blank\"\u003eQU51181\u003c\/a\u003e Warn Premium Manual Hub Set on Dana 44 and GM 10 bolt front axles.\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656307384397,"sku":"4954","price":60.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qk4954_clean__10221_7430__40608.1707828865.1280.1280.jpg?v=1786088777"},{"product_id":"5500-qt5500-wheel-bearing-packer-with-cover","title":"QT5500 Wheel Bearing Packer With Cover","description":"\u003cp\u003e\u003cstrong\u003eQT5500 Wheel Bearing Packer with Cover\u003c\/strong\u003e takes the mess out of packing wheel bearings, plus it minimizes the chances of getting contaminants mixed with your wheel bearing grease. I have been using mine for many, many years! The QT5500 Bearing Packer does an absolutely beautiful job of forcing grease between the individual bearing rollers. The easiest and most efficient way to repack tapered roller bearings up to 3-47\/64\" maximum width! Includes clear plastic base that will hold up to 1 pound of most greases, lower plate with o-ring seal, a two piece extendable forcing cone, adapters for smaller bearings, and a black plastic cover. Can be refilled using a grease gun attached to the zerk fitting in the center stem (not visible in photo) or by squeezing the contents of a standard 14 oz. grease tube into the base (like a giant tube of toothpaste). USA Made.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eSave Time\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eClean\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eJust Over 3-3\/4” Inside Diameter\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#xv\"\u003eTech Note 4\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eSave Time\u003c\/strong\u003e\u003cbr\u003eQT5500 is one of the slickest tools to have on your tool shelf. Not only does it save time, save grease, and do a better, cleaner job compared to hand packing bearings, the QT5500 reduces your exposure to all the chemicals found in modern greases. Did you ever think about the compounds you force into your skin as you push grease between the rollers when hand packing?\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eClean\u003c\/strong\u003e\u003cbr\u003eAfter greasing, clean any grease that might have gotten on the outside of base. Between jobs, keep your QT5500 covered with a clean rag. To refill, thread the outer part of the forcing cone onto the lower plate stem. Pull up with a rocking motion to break the vacuum. Leave the lower plate in the base in if you are refilling with a grease gun or remove the plate to fill from a tube or bulk grease source. To help you remove the lower plate, it is equipped with an assist spring that will push against the base floor when your grease is all used up.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eJust Over 3-3\/4” Inside Diameter \u003c\/strong\u003e\u003cbr\u003e QT5500 has a inside diameter of just over 3-3\/4\" so it will work on almost all 1 ton and smaller truck 4x4 outer wheel bearings, front inner wheel bearings and single rear wheel inner bearings except 1985-1997 Fords with the 10.25\" rear axle (\u003ca href=\"\/products\/50626-qu50626-timken-inner-wheel-bearing-for-1985-1994-ford-10-25-rear\" target=\"_blank\"\u003eQU50626\u003c\/a\u003e). For dual rear wheel trucks, it is large enough for most GM trucks with the 10.5\" or Dana 70 rear axle and most Fords with Dana 70 or Dana 80 rear axles, however, it is not large enough for 1970s to current Dodge dual rear wheel trucks (\u003ca href=\"\/products\/50624-qu50624-timken-inner-wheel-bearing-for-ford-10-1-2-rear-axles\" target=\"_blank\"\u003eQU50624\u003c\/a\u003e), GM dually trucks with 11.5\" rear axles, or 1985-1997 Ford DRW 10.25\" axles (\u003ca href=\"\/products\/50626-qu50626-timken-inner-wheel-bearing-for-1985-1994-ford-10-25-rear\" target=\"_blank\"\u003eQU50626\u003c\/a\u003e).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"xv\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eExploded Views:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"\/collections\/exploded-views-for-4x4s-suvs-light-trucks\" target=\"_blank\"\u003eExploded View Page\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003eDodge, GM, Ford, Dana 70, Dana 80\u003cbr\u003e Almost all 1 ton and smaller truck 4x4s (1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018) except 1985-1997 Fords with 10.25” rear axle. \u003cbr\u003e It is not large enough for 1970s to current Dodge dual rear wheel trucks (\u003ca href=\"\/products\/50624-qu50624-timken-inner-wheel-bearing-for-ford-10-1-2-rear-axles\" target=\"_blank\"\u003eQU50624\u003c\/a\u003e), 2011-up GM dually trucks with 11.5\" rear axles, or 1985-1997 Ford 10.25\" axles (\u003ca href=\"\/products\/50626-qu50626-timken-inner-wheel-bearing-for-1985-1994-ford-10-25-rear\" target=\"_blank\"\u003eQU50626\u003c\/a\u003e).\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656344248397,"sku":"5500","price":49.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt5500_1806_1600__04176_21129__85456.1707829536.1280.1280.png?v=1786098416"},{"product_id":"9213-qt9213i-reversible-snap-ring-pliers-with-changeable-tips","title":"QT9213i Reversible Snap Ring Pliers With Changeable Tips","description":"\u003cp\u003e\u003cstrong\u003eQT9213i Reversible Snap Ring Pliers\u003c\/strong\u003e that switches easily with included hex key from internal or external operation. Cushion grips offer storage for spare tips. Includes 1.8mm straight and 1.2mm 90 degree tips. Imported.\u003c\/p\u003e","brand":"Tools - Standard","offers":[{"title":"Default Title","offer_id":41656456544333,"sku":"9213","price":33.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QT9213i_1.png?v=1786097749"},{"product_id":"9404-qt9404-application-brush","title":"QT9404 Application Brush","description":"\u003cp\u003e\u003cstrong\u003eQT9404 Application Brush\u003c\/strong\u003e is ideal for applying Gear Marking Compound or Anti-Seize Lubricant to parts. Brush fibers and steel handle are resistant to most automotive chemicals. USA made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eBrush Specs\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBrush Specs\u003c\/strong\u003e\u003cbr\u003eQT9404 is approximately 6\" long with a 1\/2\" wide brush.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eUniversal Application\u003c\/p\u003e\n","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656471453773,"sku":"9404","price":3.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qt9404_clean__16421.1721845243.1280.1280.png?v=1786098100"},{"product_id":"9975-s9975-5-grams-anti-seize-lubricant","title":"S9975 5 grams Anti-Seize Lubricant","description":"\u003cp\u003e\u003cstrong\u003eS9975 Permatex 5 Gram Packet Anti-Seize Lubricant \u003c\/strong\u003ePrevents seizing, galling, corrosion, and withstands high temps. USA Made.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More? See: \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" target=\"_blank\"\u003eS81343\u003c\/a\u003e Tube\u003c\/strong\u003e, 1 oz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eTo Apply\u003c\/a\u003e \u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#sds\"\u003e\u003cstrong\u003eSafety Data Sheets\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTo Apply \u003c\/strong\u003e\u003cbr\u003eI use \u003ca href=\"\/products\/9404-qt9404-application-brush\" target=\"_blank\"\u003eQT9404\u003c\/a\u003e Brush to apply Anti-Seize Lubricant on the threads and shanks of fasteners such as crossmember bolts that are subject to rust but are not usually prone to loosening up from vibration. I also use it on bellhousing Dowell Pins and between the mating surfaces of spindles or hubs and steering knuckles to prevent rust bonding.\u003c\/p\u003e\n\u003cp\u003e5 gram size is usually adequate for a single project such as an axle job. For larger jobs, order 1 ounce size \u003ca href=\"\/products\/81343-s81343-1oz-tube-permatex-anti-seize-compound\" target=\"_blank\"\u003eS81343\u003c\/a\u003e which typically has enough material to do more complex projects like a clutch replacement.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"prop65\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eCalifornia Proposition 65:\u003c\/strong\u003e\u003c\/span\u003e This product is not subject to California Proposition 65.\u003cbr\u003eSource: MSDS Version 5; Revision Date 27-Oct-2016\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"sds\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eSafety Data Sheets: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eMaterial Safety Data Sheet \u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/81343_Anti_Seize_MSDS.pdf?v=1760973028\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003ca name=\"applications\"\u003e\u003c\/a\u003e \u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eUniversal","brand":"Permatex","offers":[{"title":"Default Title","offer_id":41656477384781,"sku":"9975","price":6.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/S9975clean__94533_9180__51405.1707831533.1280.1280.jpg?v=1786096550"},{"product_id":"9978-s9978-medium-strength-blue-242-threadlocker-1-gram","title":"S9978 Medium Strength Blue 242 Threadlocker (1 gram)","description":"\u003cp\u003e\u003cstrong\u003eS9978 Medium Strength Blue 242 Threadlocker\u003c\/strong\u003e is our most widely used Threadlocker for automotive applications. Medium strength Threadlockers are used on most fasteners subject to vibration caused loosening that are not exposed to high heat. Typical applications include axle shaft flange bolts, spindle bolts, hub retaining bolts, ring gear bolts, pinion nuts, transmission fasteners, transfer case hardware, clutch cover bolts, flywheel bolts, and more. \u003cbr\u003eTwo sizes available, S9978 will typically treat 4-8 fasteners depending upon size, \u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003eS24200\u003c\/a\u003e is usually enough to cover all the fasteners of a major component like an axle, transmission, or transfer case. USA Made.\u003c\/p\u003e \u003cp\u003eAlso see our \u003ca href=\"\/collections\/4x4-hardware-tools-automotive-shop-supplies\" target=\"_blank\"\u003eShop Supplies\u003c\/a\u003e web page for more thread treatment chemicals\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"#note1\"\u003eWhen to Use\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#sds\"\u003e\u003cstrong\u003eSafety Data Sheets\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e When To Use\u003c\/strong\u003e\u003cbr\u003e Shop manuals may or may not specify the use of a Threadlocking compound. Most older manuals do not make any reference to any thread treatment, but most recent ones do. With the exception of wheel lug nuts, most threaded fasteners used in automotive drivetrains could be candidates for either a Threadlocker or anti-seize compound. If your service manual gives no guidance, you need to base your decision on both environmental conditions (corrosive and\/or wet) and the consequences that may occur if a fastener backs off. As a basic rule, I apply Threadlocker to most fasteners such as spindle bolts that could cause severe consequences if they loosened up. For things like cross member bolts that usually do not come loose, but are subject to corrosion, I use anti-seize.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"prop65\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eCalifornia Proposition 65:\u003c\/strong\u003e\u003c\/span\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/moved-694e4082f8d8fe1674bebf6b2f576e80.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals, including Titanium Dioxide 13464-67-7 which is known to the State of California to cause cancer. For more information, go to \u003ca href=\"https:\/\/www.P65Warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e \u003ctable style=\"height: 38px; width: 360px\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: center\"\u003eChemical Name:\u003c\/td\u003e \u003ctd style=\"text-align: center\"\u003eCalifornia Proposition 65:\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e Titanium Dioxide – 13463-67-7\u003c\/td\u003e \u003ctd\u003eCarcinogen\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e(source: MSDS Version 2; Revision Date 02-Mar-2016)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"sds\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eSafety Data Sheets: \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eMaterial Safety Data Sheet\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/MSDS-BlueThreadlocker-19967.pdf?v=1760728094\"\u003eMSDS\u003c\/a\u003e\u003c\/p\u003e","brand":"Permatex","offers":[{"title":"Default Title","offer_id":41656478400589,"sku":"9978","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/s9978_thmb__83979_24446__20813.1707831556.1280.1280.png?v=1786096936"},{"product_id":"11164-qu11164-1-3-4-thread-spindle-hex-nut-for-dodge-ihc-jeep-dana-44","title":"QU11164 1-3\/4 Thread Spindle Hex Nut for Dodge, IHC, Jeep Dana 44","description":"\u003cp\u003e\u003cstrong\u003e QU11164 1-3\/4 Thread Spindle Hex Nut for Dodge, International, and Jeep Dana 44 Front Axles\u003c\/strong\u003e is an original equipment spec case hardened spindle nut that fits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3\/4\" spindle threads and external mount wheel hubs. Hex size is 2-1\/2\". Use 2 per side, 4 per vehicle. USA Made. Sold individually.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003e1.750” Thread\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e This Spindle Nut fits 1957-1974 Dodge, 1956-1975 International, and 1968-1973 Jeep trucks with front spindles that have 1-3\/4' threads and wheel hubs that are drilled and tapped with 6 3\/8\" holes in a 3-3\/4\" bolt circle to mount an external drive flange or lockout hub. Also used for 1966-1975 IHC Dana 60 rear axle applications. \u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e washer is NOT used on 1964-1975 International 1\/2 ton 4x4s or 1969-1974 Dodge W-100 4x4 trucks with 3-3\/8\" diameter internally splined wheel hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1.750” Thread\u003c\/strong\u003e\u003cbr\u003e International and Jeep truck year and model application information is often difficult to precisely list due to the relatively low production numbers and the fact that both manufacturers often built special purpose vehicles for government and vocational applications. Regardless of the application information, if you have a front spindle with 1.750\" thread, QU11164 is the correct part for your 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003e \u003ca href=\"\/products\/11165-qu11165-nla-inner-spindle-thrust-washer-dana-44-front-axles\" target=\"_blank\"\u003eQU11165\u003c\/a\u003e Spindle Nut Thrust Washer\u003cbr\u003e\u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e Spindle Lock Washer (goes between outer and and inner spindle nuts)\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Gasket for Lockout Hub or Drive Flange\u003cbr\u003e\u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704\u003c\/a\u003e Front Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701\u003c\/a\u003e Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702\u003c\/a\u003e Wheel Bearing 1-3\/4\" ID\u003cbr\u003e\u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703\u003c\/a\u003e Wheel Bearing 1-13\/16\" ID \u003cbr\u003e\u003ca href=\"\/products\/4924-tk4924-early-front-wheel-bearing-seal-gasket-kit-for-dana-44-axles\" target=\"_blank\"\u003eTK4924\u003c\/a\u003e Front Wheel Bearing Kit 1957-1968 Dodge and 1956-1971.5 IHC\u003cbr\u003e\u003ca href=\"\/products\/4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late\" target=\"_blank\"\u003eTK4926\u003c\/a\u003e Front Wheel Bearing Kit 1969-1974 Dodge, IHC, and 1968-1973 Jeep\u003cbr\u003e\u003ca href=\"\/products\/1013-qt1013-usa-made-1-2-drive-x-2-5-hex-thin-wall-spindle-nut-socket\" target=\"_blank\"\u003eQT1013\u003c\/a\u003e 2-1\/2\" Hex Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e \u003cbr\u003e \u003cstrong\u003eDodge:\u003cbr\u003e\u003c\/strong\u003e W100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968 \u003cbr\u003e W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e 100, 1100 1\/2 ton with 6 bolt, external mount hub with 3-3\/4\" bolt circle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963\u003cbr\u003e 120, 1200 3\/4 ton: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 \u003cbr\u003e IHC Dana 60 Rear Axle: 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003e J4000 with 8000 pound GVW including Camper Special: 1968, 1969, 1970\u003cbr\u003e J4800 with 8000 pound GVW including Camper Special: 1971, 1972, 1973\u003c\/p\u003e","brand":"OEM-MFR","offers":[{"title":"Default Title","offer_id":41656588697677,"sku":"11164","price":29.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11164_1200_clean__87705_11602__26360.1707837905.1280.1280.jpg?v=1786095830"},{"product_id":"11165-qu11165-nla-inner-spindle-thrust-washer-dana-44-front-axles","title":"QU11165 NLA Inner Spindle Thrust Washer Dana 44 Front Axles","description":"\u003cp\u003eDISCONTINUED\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQU11165 Spindle Thrust Washer for Dodge, International, and Jeep Dana 44 Front Axles \u003c\/strong\u003efits 1956-1975 International, 1957-1974 Dodge, and 1968-1973 Jeep 4x4 trucks with 1-3\/4\" hex spindle nuts and external mount wheel hubs. One of these washers is used on each side between the outer wheel bearing and inner spindle nut. Sold individually.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eFits\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eTab\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e1.750\" Thread Spindle\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note4\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eThis Thrust Washer fits 1957-1974 Dodge, 1956-1975 International, and 1968-1973 Jeep trucks with front spindles that have 1-3\/4' threads and wheel hubs that are drilled and tapped with 6 3\/8\" holes in a 3-3\/4\" bolt circle to mount an external drive flange or lockout hub. \u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576 \u003c\/a\u003ewasher is NOT used on 1964-1975 International 1\/2 ton 4x4s or 1969-1974 Dodge W-100 4x4 trucks with 3-3\/8\" diameter internally splined wheel hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eTab\u003c\/strong\u003e\u003cbr\u003eQU11165 Spindle Thrust Washer has an internal tab that fits a 1\/4\" spindle key slot. It is not uncommon to find a spindle with slightly mashed threads at the outboard end which will reduce the slot width. If present, this condition will need to be fixed before you can install the thrust washer.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e1.750\" Thread Spindle\u003c\/strong\u003e\u003cbr\u003eInternational and Jeep truck year and model application information is often difficult to precisely list due to the relatively low production numbers and the fact that both manufacturers often built special purpose vehicles for government and vocational applications. Regardless of the application information, if you have a front spindle with 1.750\" thread, QU11165 is the correct part for your 4x4.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU11165 Spindle Nut Thrust Washer:\u003cbr\u003e\u003ca href=\"\/products\/11164-qu11164-1-3-4-thread-spindle-hex-nut-for-dodge-ihc-jeep-dana-44\" target=\"_blank\"\u003eQU11164\u003c\/a\u003e Hex Spindle Nut with 1-3\/4\" Thread\u003cbr\u003e\u003ca href=\"\/products\/10576-qu10576-1-3-4-id-bend-over-tab-lock-washer-for-4x4-front-axles\" target=\"_blank\"\u003eQU10576\u003c\/a\u003e Spindle Lock Washer (goes between outer and and inner spindle nuts)\u003cbr\u003e\u003ca href=\"\/products\/40573-tk40573-6-bolt-front-hub-gasket-for-dana-44-ford-dana-60-front-axles\" target=\"_blank\"\u003eTK40573\u003c\/a\u003e Gasket for Lockout Hub or Drive Flange\u003cbr\u003e\u003ca href=\"\/products\/50704-qu50704-4x4-front-wheel-seal-for-vintage-dana-44-front-axles\" target=\"_blank\"\u003eQU50704\u003c\/a\u003e Front Wheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50701-qu50701-timken-tapered-wheel-bearing-cup\" target=\"_blank\"\u003eQU50701\u003c\/a\u003e Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50702-qu50702-timken-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50702\u003c\/a\u003e Wheel Bearing 1-3\/4\" ID\u003cbr\u003e\u003ca href=\"\/products\/50703-qu50703-timken-1-13-16-id-tapered-wheel-bearing\" target=\"_blank\"\u003eQU50703\u003c\/a\u003e Wheel Bearing 1-13\/16\" ID \u003cbr\u003e\u003ca href=\"\/products\/4924-tk4924-early-front-wheel-bearing-seal-gasket-kit-for-dana-44-axles\" target=\"_blank\"\u003eTK4924\u003c\/a\u003e Front Wheel Bearing Kit 1957-1968 Dodge and 1956-1971.5 IHC\u003cbr\u003e\u003ca href=\"\/products\/4926-tk4926-torque-king-front-wheel-bearing-and-seal-kit-late\" target=\"_blank\"\u003eTK4926\u003c\/a\u003e Front Wheel Bearing Kit 1969-1974 Dodge, IHC, and 1968-1973 Jeep\u003cbr\u003e\u003ca href=\"\/products\/1013-qt1013-usa-made-1-2-drive-x-2-5-hex-thin-wall-spindle-nut-socket\" target=\"_blank\"\u003eQT1013\u003c\/a\u003e 2-1\/2\" Hex Spindle Nut Socket\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e\u003cbr\u003eW100: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003cbr\u003eW200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e100, 1100 1\/2 ton with 6 bolt, external mount hub with 3-3\/4\" bolt circle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963\u003cbr\u003e120, 1200 3\/4 ton: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eJ4000 with 8000 pound GVW including Camper Special: 1968, 1969, 1970\u003cbr\u003eJ4800 with 8000 pound GVW including Camper Special: 1971, 1972, 1973\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656588795981,"sku":"11165","price":23.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11165__70856_8041__05434.1707837923.1280.1280.jpg?v=1786717785"},{"product_id":"11241-qu11241used-right-d70-axle-shaf","title":"QU11241USED RIGHT D70 AXLE SHAF","description":"\u003cp\u003eUSED RIGHT TRACTA TYPE DANA 70 FRONT AXLE SHAFT ASSEMBLY FOR 1969-1975 DODGE W200 AND W300 4X4 TRUCKS WITH DANA 70 CLOSED KNUCKLE FRONT AXLES INNER SHAFT HAS 35 SPLINES AND OUTER HAS 21 SPLINES\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656599478349,"sku":"5511241","price":499.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11241uassemblyclean__61423_8105__05482.1707839173.1280.1280.jpg?v=1786724902"},{"product_id":"11242-qu11242used-left-d70-axle-shaft","title":"QU11242USED LEFT D70 AXLE SHAFT","description":"\u003cp\u003eUSED LEFT TRACTA TYPE DANA 70 FRONT AXLE SHAFT ASSEMBLY FOR 1969-1975 DODGE W200 AND W300 4X4 TRUCKS WITH DANA 70 CLOSED KNUCKLE FRONT AXLES INNER SHAFT HAS 35 SPLINES AND OUTER HAS 21 SPLINES\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656599576653,"sku":"5511242","price":499.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11242uassemblyclean__34974_8108__63010.1707839233.1280.1280.jpg?v=1786721488"},{"product_id":"11272-qu11272u-right-d70-knuckle","title":"QU11272U RIGHT D70 KNUCKLE","description":"\u003cp\u003eUSED BARE RIGHT DANA 70 STEERING KNUCKLE FOR 1957-1974 DODGE W300 4X4 TRUCKS\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41656605442125,"sku":"5511272","price":204.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11272uclean__29151_8129__09494.1707839748.1280.1280.jpg?v=1742490896"},{"product_id":"11273-qu11273u-left-d70-knuckle","title":"QU11273U LEFT D70 KNUCKLE","description":"\u003cp\u003eUSED BARE LEFT DANA 70 STEERING KNUCKLE FOR 1957-1974 DODGE W300 4X4 TRUCKS\u003c\/p\u003e","brand":"Used","offers":[{"title":"Default Title","offer_id":41656605507661,"sku":"5511273","price":204.75,"currency_code":"USD","in_stock":false}]},{"product_id":"11369-qu11369-new-outer-axle-shaft-for-1957-1968-dodge-dana-44-front","title":"QU11369 New Outer Axle Shaft for 1957-1968 Dodge Dana 44 Front","description":"\u003cp\u003e\u003cstrong\u003eQU11369 New Outer Axle Shaft\u003c\/strong\u003e for 1957-1968 Dodge W100 and W200 Dana 44 closed knuckle front axles. Available while supplies last.\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656615075917,"sku":"11369","price":344.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu11369nos_clean__83596_8181__36302.1707840811.1280.1280.jpg?v=1786733121"},{"product_id":"15006-qu15006-large-6-bolt-front-hub-gasket-for-dana-60-70-4x4-front-axles","title":"QU15006 Large 6 Bolt Front Hub Gasket for Dana 60 \u0026 70 4x4 Front Axles","description":"\u003cp\u003e\u003cstrong\u003eQU15006 Large 6 Bolt Hub Gasket\u003c\/strong\u003e fits 1967-1969 1¼ ton Jeep M715 military series with Dana 60 closed knuckle front axles plus 1958-1968 Dodge W300, and most 1961-1968 International 1 ton trucks with Dana-Spicer Model 70 closed knuckle front axles. 4-3\/8\" Bolt Circle. Limited Supply.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eLockouts on Jeep Military vehicles:\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eMatching Parts for QU15006 Hub Gasket for 1958-1968 Dodge W300 Dana 70 Closed Knuckle Front Axle:\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eMatching Parts for 1961-1968 IHC 1 Ton 4x4 Dana 70 Closed Knuckle Front Axle:\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eMatching Parts for 1967-1969 Jeep M715, M725, M726 Series Dana 60 Closed Knuckle Front Axle:\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLockouts on Jeep Military vehicles:\u003c\/strong\u003e\u003cbr\u003eJeep M715\/M725\/M726 1-1\/4 ton military vehicles all had solid splined hub drive flanges from the factory. Once these vehicles hit the civilian market, many owners elected to replace the drive flanges with lockout hubs for increased fuel economy. Most of these lockouts were made by Dualmatic\/Selectro which were less than 1\/2 the price of a set of Warn hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for QU15006 Hub Gasket for 1958-1968 Dodge W300 Dana 70 Closed Knuckle Front Axle:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/15032-qu15032-selectro-lock-out-hub-set-for-1967-1969-jeep-and-dodge-w300\" target=\"_blank\"\u003eQU15032 \u003c\/a\u003eSelectro Hub Set\u003cbr\u003e\u003ca href=\"\/products\/50645-qu50645-dana-70-front-wheel-seal-for-1958-1974-dodge-w300-1961-1968-ihc\" target=\"_blank\"\u003eQU50645 \u003c\/a\u003eWheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402 \u003c\/a\u003eInner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403 \u003c\/a\u003eInner Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50644-qu50644-timken-outer-wheel-bearing\" target=\"_blank\"\u003eQU50644 \u003c\/a\u003eOuter Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50662-qu50662-timken-taper-bearing-cup\" target=\"_blank\"\u003eQU50662 \u003c\/a\u003eOuter Wheel Bearing Cup\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for 1961-1968 IHC 1 Ton 4x4 Dana 70 Closed Knuckle Front Axle:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/50645-qu50645-dana-70-front-wheel-seal-for-1958-1974-dodge-w300-1961-1968-ihc\" target=\"_blank\"\u003eQU50645 \u003c\/a\u003eWheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402 \u003c\/a\u003eInner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403 \u003c\/a\u003eInner Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50680-qu50680-timken-taper-roller-bearing-for-np200-np201-vintage-wheel-bearing\" target=\"_blank\"\u003eQU50680 \u003c\/a\u003eOuter Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50705-qu50705-timken-bearing-cup\" target=\"_blank\"\u003eQU50705 \u003c\/a\u003eOuter Wheel Bearing Cup\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts for 1967-1969 Jeep M715, M725, M726 Series Dana 60 Closed Knuckle Front Axle:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"\/products\/15032-qu15032-selectro-lock-out-hub-set-for-1967-1969-jeep-and-dodge-w300\" target=\"_blank\"\u003eQU15032 \u003c\/a\u003eSelectro Hub Set\u003cbr\u003e\u003ca href=\"\/products\/50642-qu50642-front-inner-wheel-seal-1967-1969-jeep-m715-m725-m726-military\" target=\"_blank\"\u003eQU50642 \u003c\/a\u003eWheel Seal\u003cbr\u003e\u003ca href=\"\/products\/50398-qu50398-2-1-4-id-timken-wheel-or-differential-side-tapered-bearing\" target=\"_blank\"\u003eQU50398 \u003c\/a\u003eInner Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50396-qu50396-timken-3-13-16-od-taper-wheel-or-diff-bearing-cup\" target=\"_blank\"\u003eQU50396 \u003c\/a\u003eInner Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/50877-qu50877-timken-taper-bearing-for-vintage-truck-applications\" target=\"_blank\"\u003eQU50877 \u003c\/a\u003eOuter Wheel Bearing\u003cbr\u003e\u003ca href=\"\/products\/50876-qu50876-timken-taper-bearing-cup-for-vintage-truck-applications\" target=\"_blank\"\u003eQU50876 \u003c\/a\u003eOuter Wheel Bearing Cup\u003cbr\u003e\u003ca href=\"\/products\/8364-tk8364-front-wheel-bearing-and-seal-kit-for-1967-1969-jeep-m715\" target=\"_blank\"\u003eTK8364 \u003c\/a\u003eFront Wheel Bearing and Seal Kit for 1967-1969 Jeep M715\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003e\u003c\/strong\u003eW300 Dana 70 Closed Knuckle Front Axle: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003cbr\u003e\u003c\/strong\u003eMost 1 Ton 4x4 Dana 70 Closed Knuckle Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e\u003cbr\u003eM715, M725, M726 1-1\/4 ton Military Trucks: 1967, 1968, 1969\u003c\/p\u003e","brand":"Dana Axle","offers":[{"title":"Default Title","offer_id":41656630706253,"sku":"15006","price":8.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15006_1200_clean__63738_11604__07701.1707842868.1280.1280.jpg?v=1782978834"},{"product_id":"15032-qu15032-selectro-lock-out-hub-set-for-1967-1969-jeep-and-dodge-w300","title":"QU15032 Selectro Lock Out Hub Set for 1967-1969 Jeep and Dodge W300","description":"\u003cp\u003e\u003cstrong\u003eQU15032 Selectro Lock Out Hub Set\u003c\/strong\u003e for 1967-1969 Jeep M715, M725, M726 1-1\/4 ton 4x4 Military Trucks and Dodge W300 4x4 Civilian 1 ton.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eHub Change\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eDodge Matching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eJeep Matching Parts\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#applications\"\u003eApplications\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eHub Change\u003c\/strong\u003e\u003cbr\u003eJeep M715\/M725\/M726 1-1\/4 ton military vehicles all had solid splined hub drive flanges from the factory. Once these vehicles hit the civilian market, many owners elected to replace the drive flanges with lockout hubs for increased fuel economy. Most of these lockouts were made by Dualmatic\/Selectro which were less than 1\/2 the price of a set of Warn hubs.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge Matching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU15032 Hub Set for 1958-1968 Dodge W300 Dana 70 Closed Knuckle Front Axle: \u003cbr\u003e\u003ca href=\"\/products\/15006-qu15006-large-6-bolt-front-hub-gasket-for-dana-60-70-4x4-front-axles\" target=\"_blank\"\u003eQU15006\u003c\/a\u003e Hub Gasket \u003cbr\u003e\u003ca href=\"\/products\/50645-qu50645-dana-70-front-wheel-seal-for-1958-1974-dodge-w300-1961-1968-ihc\" target=\"_blank\"\u003eQU50645\u003c\/a\u003e Wheel Seal \u003cbr\u003e\u003ca href=\"\/products\/50402-qu50402-heavy-duty-timken-differential-wheel-bearing-cup\" target=\"_blank\"\u003eQU50402\u003c\/a\u003e Inner Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50403-qu50403-heavy-duty-timken-diff-wheel-taper-bearing\" target=\"_blank\"\u003eQU50403\u003c\/a\u003e inner Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50644-qu50644-timken-outer-wheel-bearing\" target=\"_blank\"\u003eQU50644\u003c\/a\u003e Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50662-qu50662-timken-taper-bearing-cup\" target=\"_blank\"\u003eQU50662\u003c\/a\u003e Outer Wheel Bearing Cup\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eJeep Matching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for QU15032 Hub Set for 1967-1969 Jeep M715, M725, M726 Series Dana 60 Closed Knuckle Front Axle: \u003cbr\u003e\u003ca href=\"\/products\/15006-qu15006-large-6-bolt-front-hub-gasket-for-dana-60-70-4x4-front-axles\" target=\"_blank\"\u003eQU15006\u003c\/a\u003e Hub Gasket \u003cbr\u003e\u003ca href=\"\/products\/50642-qu50642-front-inner-wheel-seal-1967-1969-jeep-m715-m725-m726-military\" target=\"_blank\"\u003eQU50642\u003c\/a\u003e Wheel Seal \u003cbr\u003e\u003ca href=\"\/products\/50398-qu50398-2-1-4-id-timken-wheel-or-differential-side-tapered-bearing\" target=\"_blank\"\u003eQU50398\u003c\/a\u003e Inner Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50396-qu50396-timken-3-13-16-od-taper-wheel-or-diff-bearing-cup\" target=\"_blank\"\u003eQU50396\u003c\/a\u003e Inner Wheel Bearing Cup \u003cbr\u003e\u003ca href=\"\/products\/50877-qu50877-timken-taper-bearing-for-vintage-truck-applications\" target=\"_blank\"\u003eQU50877\u003c\/a\u003e Outer Wheel Bearing \u003cbr\u003e\u003ca href=\"\/products\/50876-qu50876-timken-taper-bearing-cup-for-vintage-truck-applications\" target=\"_blank\"\u003eQU50876\u003c\/a\u003e Outer Wheel Bearing Cup\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003c\/strong\u003e \u003cbr\u003eW300 Dana 70 Closed Knuckle Front Axle: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIHC:\u003c\/strong\u003e \u003cbr\u003eMost 1 Ton 4x4 Dana 70 Closed Knuckle Front Axle: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003c\/strong\u003e \u003cbr\u003eM715, M725, M726 1-1\/4 ton Military Trucks: 1967, 1968, 1969\u003c\/p\u003e","brand":"Torque King","offers":[{"title":"Default Title","offer_id":41656635949133,"sku":"15032","price":384.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/qu15032_1200_clean__53262_12181__35733.1707843306.1280.1280.jpg?v=1742493928"},{"product_id":"1133-qta1133-front-inner-axle-shaft-seal-press-screw-assembly","title":"QTA1133 Front Inner Axle Shaft Seal Press Screw Assembly","description":"\u003cp\u003e\u003cstrong\u003eQTA1133 Front Inner Axle Shaft Seal Press Screw Assembly\u003c\/strong\u003e for Dana\/Spicer Model 50, 60, 61, 70, and GM 10 Bolt Front Axles. Use with the appropriate Seal Installer and Thrust Plate for your application to quickly and easily press the Inner Axle Shaft oil seals in your 4x4 front axle. Rod is CNC machined from a billet of solid high strength U.S. produced steel. Has wrench flats for 7\/8\" end wrench to hold rod steady as you tighten the hardened forcing nut against the seal installer for your application. QTA1133 Assembly includes Press Screw, Hardened Forcing Nut, \u003ca href=\"\/products\/95006-qu95006-5-8-uss-grade-8-hex-nut\" target=\"_blank\"\u003eQU95006\u003c\/a\u003e Grade 8 Nut, 2 \u003ca href=\"\/products\/95051-qu95051-5-8-sae-gr8-flat-washer\" target=\"_blank\"\u003eQU95051\u003c\/a\u003e Grade 8 Flat Washers, and Retaining Clip. Made in U.S.A. by us here in Montana.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003eUse the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"#note1\"\u003e\u003cstrong\u003eAdjustable Dept Installer Sets\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note2\"\u003e\u003cstrong\u003eFixed Depth Installer Sets\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAdjustable Dept Installer Sets\u003c\/strong\u003e\u003cbr\u003eThis Press Screw Assembly is a component part of these \u003cstrong\u003eADJUSTABLE DEPTH\u003c\/strong\u003e Inner Axle Seal Installer Sets: \u003cbr\u003e\u003ca href=\"\/products\/4643-ts4643-adjustable-inner-axle-seal-tool-set-model-50\" target=\"_blank\"\u003eTS4643\u003c\/a\u003e Ford Excursion and 1999-2004 Super Duty® F-250 and F-350 4x4s with Dana 50 Front Axles\u003cbr\u003e\u003ca href=\"\/products\/884644-ts4644-dana-60-adjustable-depth-inner-axle-seal-installer-tool-set\" target=\"_blank\"\u003eTS4644\u003c\/a\u003e 1992-current F-350, 1999-current Super Duty® F-250, F-450, F-550 4x4s with Dana 60 Front Axles\u003cbr\u003e\u003ca href=\"\/products\/884656-ts4656-dana-60-adjustable-depth-inner-axle-seal-tool-set\" target=\"_blank\"\u003eTS4656\u003c\/a\u003e 1975-1993 All Dana 60 and 61 King Pin Axles in Chevy. Dodge, Ford, GM, and IHC 4x4 trucks\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e Fixed Depth Installer Sets\u003c\/strong\u003e\u003cbr\u003eThis Press Screw Assembly is a component part of these \u003cstrong\u003eFIXED DEPTH\u003c\/strong\u003e Inner Axle Seal Installer Sets: \u003cbr\u003e\u003ca href=\"\/products\/84802-ts4802-inner-axle-oil-seal-tool-set-2002-ram-no-cad\" target=\"_blank\"\u003eTS4802\u003c\/a\u003e 1975-1993 All Dana 60 and 61 King Pin Axles in Chevy. Dodge, Ford, GM, and IHC 4x4 trucks\u003cbr\u003e\u003ca href=\"\/products\/994807-ts4807-fixed-depth-ford-dana-60-s60-inner-axle-seal-installer-tool-set\" target=\"_blank\"\u003eTS4807\u003c\/a\u003e 1992-current F-350, 1999-current Super Duty® F-250, F-450, F-550 4x4s with Dana 60 Front Axles\u003cbr\u003e\u003ca href=\"\/products\/994808-ts4808-dana-50-fixed-depth-inner-axle-seal-tool-set-for-1999-2005-ford\" target=\"_blank\"\u003eTS4808\u003c\/a\u003e Ford Excursion and 1999-2004 Super Duty® F-250 and F-350 4x4s with Dana 50 Front Axles\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e  \u003cbr\u003eDana\/Spicer Models 50, 60, 62, 70 and GM Bolt Axles: (1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018)\u003c\/p\u003e","brand":"QuadTool","offers":[{"title":"Default Title","offer_id":41656636080205,"sku":"1133","price":74.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QTA1133_1.png?v=1786089793"},{"product_id":"4616-qk4616-dana-44-60-70-large-closed-knuckle-bearing-and-bushing-kit","title":"QK4616 Dana 44, 60, 70 Large Closed Knuckle Bearing and Bushing Kit","description":"\u003cp\u003e\u003cstrong\u003eQK4616 Dana 44, Dana 60, Dana 70 Large Closed Knuckle Bearing and Bushing Kit\u003c\/strong\u003e for ¾ ton to 1½ ton Dodge, GM, IHC trucks and Jeep M715* 1¼ military series Using Dana 44HD, 60, and 70 closed knuckle axles (12 bolt knuckle seals). Kit includes 2 upper \u003ca href=\"\/products\/40327-qu40327-large-bronze-king-pin-bushing-for-closed-knuckle-front-axles\" target=\"_blank\"\u003eQU40327\u003c\/a\u003e bronze upper knuckle bushings, two \u003ca href=\"\/products\/50600-qu50600-timken-king-pin-or-knuckle-bearing-for-dana-44hd-60-70-axles\" target=\"_blank\"\u003eQU50600\u003c\/a\u003e Timken® lower knuckle bearings, four \u003ca href=\"\/products\/50601-qu50601-timken-king-pin-or-knuckle-bearing-cup-for-dana-44hd-60-70\" target=\"_blank\"\u003eQU50601\u003c\/a\u003e Timken® knuckle bearing cups, \u003ca href=\"\/products\/4765-qa4765-11-piece-king-pin-shim-kit-dana-44hd-dana-60-dana-70-axles\" target=\"_blank\"\u003eQA4765\u003c\/a\u003e shim kit, two \u003ca href=\"\/products\/40543-qu40543-woodruff-king-pin-key-for-upper-king-pin-bushings\" target=\"_blank\"\u003eQU40543\u003c\/a\u003e King Pin Keys, and \u003ca href=\"\/products\/24200-s24200-medium-strength-blue-242-threadlocker-6ml\" target=\"_blank\"\u003eS24200\u003c\/a\u003e Threadlocker. USA Made.\u003c\/p\u003e \u003cdiv class=\"col-md-8\"\u003e \u003cp\u003e\u003cstrong\u003eSEE Tech Note 1 BELOW FOR ALTERNATIVE KITS!\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eEXTREMELY LIMITED SUPPLY! \u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eAlternative Kit\u003c\/a\u003e \u003cbr\u003e \u003ca href=\"#note2\"\u003eShims\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003e\u003cstrong\u003e8 Bolt Ball Seals\u003c\/strong\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eAlternative Kit\u003c\/strong\u003e\u003cbr\u003eThe Upper Bushings used in this Kit are in critically short supply and very expensive. For a much less expensive alternative, you can use the \u003ca href=\"\/products\/4618-qk4618-dana-44hd-dana-60-dana-70-large-closed-knuckle-bearing-kit\" target=\"_blank\"\u003eQK4618\u003c\/a\u003e Large Knuckle Bearing Kit.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eShims\u003c\/strong\u003e\u003cbr\u003eShims are used between the King Pin Caps and Steering Knuckles to set your Knuckle Bearing\/Bushing turning preload. More shims decreases preload, less shims increases preload. King Pin Caps are shimmed to put the specified turning preload on the bearings. The amount of turning preload on Model 44 axles varies by vehicle and year but the value is measured by a beam or dial type torque wrench (refer to the vehicle manufacturer Service Manual for your specific model specification). Too loose can cause poor steering or \"Death Wobble\", too tight will lead to rapid bearing failure, broken parts, and possible steering loss.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e8 Bolt Ball Seals\u003c\/strong\u003e\u003cbr\u003eIf you have a Dana 25, Dana 27, Dana 30, or Dana 44 front axle with 8 bolt ball seals, see \u003ca href=\"\/products\/4617-qk4617-dana-axle-small-knuckle-bearing-and-shim-kit\" target=\"_blank\"\u003eQK4617\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevrolet\/GMC:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003eK20\/K25: 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e\u003cbr\u003eW200: 1969, 1970\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003eW300: 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003eW600: 1974, 1975, 1976, 1977, 1978\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 44HD\u003c\/strong\u003e:\u003cbr\u003e200, 1200 with Heavy-Duty Model 44 Front Axle: 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 70\u003c\/strong\u003e\u003cbr\u003e300, 1300: 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e1600: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep:\u003cbr\u003e Closed Knuckle Dana 60:\u003c\/strong\u003e\u003cbr\u003eM715*, M725, M726 Military 1-1\/4 ton: 1967, 1968, 1969\u003c\/p\u003e \u003cp\u003e* Some M715 Jeeps have different lower bearings and will use 2 each of \u003ca href=\"\/products\/52283-qu52283-lower-knuckle-bearing\" target=\"_blank\"\u003eQU52283\u003c\/a\u003e and \u003ca href=\"\/products\/50894-qu50894-timken-pinion-bearing-cup\" target=\"_blank\"\u003eQU50894\u003c\/a\u003e\u003c\/p\u003e","brand":"QuadKit","offers":[{"title":"Default Title","offer_id":41656723767373,"sku":"4616","price":224.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/5156200126548639487_49963__22615_1746__60456.1707848755.1280.1280.jpg?v=1785231418"},{"product_id":"4617-qk4617-dana-axle-small-knuckle-bearing-and-shim-kit","title":"QK4617 Dana Axle Small Knuckle Bearing and Shim Kit","description":"\u003cp\u003e\u003cstrong\u003eQK4617 Dana Closed Knuckle and 1966-1971 Ford Open Knuckle Dana Axle Small Knuckle Bearing and Shim Kit\u003c\/strong\u003e includes 4 Timken® \u003ca href=\"\/products\/8950628-qu50628-king-pin-or-knuckle-bearing-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU50628\u003c\/a\u003e Knuckle Bearings, 4 Timken® \u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e Knuckle Bearing Cups, and 2 \u003ca href=\"\/products\/4939-tka4939-11-piece-premium-steering-knuckle-shim-kit-dana-25-44-axles\" target=\"_blank\"\u003eTKA4939\u003c\/a\u003e Premium Torque King® Rectangular Knuckle Shim Sets. Fits Chevy, Ford, GMC, International Scout, Jeep, and Studebaker Dana Spicer 25, 27, 30, and standard 44 closed knuckle front drive axles all of which use \u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e 8 bolt knuckle seal. QK4617 Also fits 1966-1971 Ford Bronco Dana 30 and F-100 Dana 44 Open Knuckle Front Axles. \u003c\/p\u003e \u003cp\u003eAlso see \u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e Drivers Side Upper King Pin Shims for vehicles with combination drivers side steering arm\/king pin with a trapezoid bolt pattern.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNeed More Info? \u003c\/strong\u003e Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eDan the Gear Man® Tech Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cstrong\u003e\u003ca href=\"#note1\"\u003eKit Components\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note2\"\u003eDodge and IHC Truck Upper Bushings\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note3\"\u003eDoes Not Fit Dana 44HD Axles\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"#note4\"\u003eFord Open Knuckle Dampeners and Seals\u003c\/a\u003e\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"#note5\"\u003e\u003cstrong\u003ePack Bearings\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note6\"\u003e\u003cstrong\u003eLubrication 1\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note7\"\u003e\u003cstrong\u003eLubrication 2\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note8\"\u003e\u003cstrong\u003eShims \u0026amp; Preload 1\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note9\"\u003e\u003cstrong\u003eShims and Preload 2\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note10\"\u003e\u003cstrong\u003eBearing Cup Installer\u003c\/strong\u003e\u003c\/a\u003e \u003cbr\u003e\u003ca href=\"#note11\"\u003e\u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"#applications\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note1\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 1:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eKit Components\u003c\/strong\u003e\u003cbr\u003eQK4617 Small Knuckle Bearing and Shim Kit Includes:\u003cbr\u003e(2) \u003ca href=\"\/products\/4939-tka4939-11-piece-premium-steering-knuckle-shim-kit-dana-25-44-axles\" target=\"_blank\"\u003eTKA4939\u003c\/a\u003e Premium Knuckle Shim Kit\u003cbr\u003e(1) \u003ca href=\"\/products\/50784-tk50784-small-knuckle-king-pin-bearing-only-kit\" target=\"_blank\"\u003eTK50784\u003c\/a\u003e King Pin Knuckle Bearing Kit\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note2\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 2:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDodge and IHC Truck Upper Bushings \u003c\/strong\u003e\u003cbr\u003e1960-1971 Dodge and IHC 4x4 trucks with standard Dana 44 Closed Knuckle Front Axles use either Keyed (1960-1964\/1965) or Splined 1964\/1965-1971 Bronze Upper Bushings instead of Bearings. The Bronze Bushings are more resistant to impact damage. Both GM and Jeep also had part numbers for the Keyed Upper Bushing, but we have not found a production civilian model that used them.\u003cbr\u003eDodge and IHC with bronze splined upper king pin bushings, also see: \u003ca href=\"\/products\/40569-qu40569-bronze-upper-knuckle-bushing-with-internal-splines\" target=\"_blank\"\u003eQU40569\u003c\/a\u003e.\u003cbr\u003eDodge and IHC with bronze keyed upper king pin bushings, also see: \u003ca href=\"\/products\/40564-qu40564-bronze-upper-knuckle-bushing-with-key-slot\" target=\"_blank\"\u003eQU40564\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note3\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 3:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eDoes Not Fit Dana 44HD Axles\u003c\/strong\u003e\u003cbr\u003eIf you have a Dana 44HD front axle with 12 bolt ball seals, see \u003ca href=\"\/products\/4616-qk4616-dana-44-60-70-large-closed-knuckle-bearing-and-bushing-kit\" target=\"_blank\"\u003eQK4616\u003c\/a\u003e and \u003ca href=\"\/products\/4618-qk4618-dana-44hd-dana-60-dana-70-large-closed-knuckle-bearing-kit\" target=\"_blank\"\u003eQK4618\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note4\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 4:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eFord Open Knuckle Dampeners and Seals\u003c\/strong\u003e\u003cbr\u003e1966-1971 Ford Axles with King Pins may have issues with \"Death Wobble\" an uncontrollable shaking of the steering wheel unless \u003ca href=\"\/products\/20096-qu20096-king-pin-dampener-and-seal-plate-kit\" target=\"_blank\"\u003eQU20096\u003c\/a\u003e 3-piece Dampener Kits are installed for the upper King Pin Bearings in addition to the preload shims. You will also need to use the seal caps from \u003ca href=\"\/products\/20096-qu20096-king-pin-dampener-and-seal-plate-kit\" target=\"_blank\"\u003eQU20096\u003c\/a\u003e Kits for for the lower King Bearing cups. Order 4 \u003ca href=\"\/products\/20096-qu20096-king-pin-dampener-and-seal-plate-kit\" target=\"_blank\"\u003eQU20096\u003c\/a\u003e Kits per vehicle, but only use the dampener Bushing and Washer for the upper King Pins. Ford Open Knuckle Axles also require a \u003ca href=\"\/products\/20231-qu20231-king-pin-bearing-seal-for-1966-1971-ford-bronco-and-f100\" target=\"_blank\"\u003eQU20231\u003c\/a\u003e Seal for each King Pin Bearing (4 Total).\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note5\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 5:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003ePack Bearings\u003c\/strong\u003e\u003cbr\u003eYou must pack your knuckle bearings with a suitable lubricant such as \u003ca href=\"\/products\/90018-qu90018-pyroplex-protection-es-2-synthetic-grease\" target=\"_blank\"\u003eQU90018\u003c\/a\u003e Pyroplex® Protection ES Synthetic Grease before installation to provide initial lubrication.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note6\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 6:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubrication 1\u003c\/strong\u003e\u003cbr\u003eIn service, the knuckle bearings are designed to be bathed in a semi-liquid Closed Knuckle Lubricant inside the enclosed steering knuckle. If your 4x4 has lockout hubs, you should drive the vehicle with the hubs engaged at least once monthly so the axle shaft will fling lube to the upper knuckle bearing.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note7\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 7:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eLubrication 2\u003c\/strong\u003e\u003cbr\u003eWe recommend our \u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\"\u003eClosed Knuckle Lube\u003c\/a\u003e for lubricating your Knuckle Bearings and Axle U-Joints. You can also use whatever lubricant specified in your original Operators Manual. If the vehicle manufacturer recommended steering knuckle lubricant is not available, Dana recommends SAE 140 grade gear lubricant for the knuckles. However, straight gear lube will almost always seep past the knuckle seal which covers the inside of the tires with oil, stains the garage floor and is unacceptable for current environmental standards. What I used to do, was mix SAE 250 weight gear lube with grease to make a semi-liquid lubricant which will flow into the bearings and u-joints, but not seep significantly past the seals.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note8\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 8:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eShims \u0026amp; Preload 1 \u003c\/strong\u003e\u003cbr\u003eShims are used between the King Pin Caps and Steering Knuckles to set your Knuckle Bearing\/Bushing turning preload. More shims decreases preload, less shims increases preload. King Pin Caps are shimmed to put the specified turning preload on the bearings. The amount of turning preload on varies by vehicle and year but the value is measured by a beam or dial type torque wrench (refer to the vehicle manufacturer Service Manual for your specific model specification or if a manual is unavailable, see Tech Note 7). Too loose can cause poor steering or \"Death Wobble\", too tight will lead to rapid bearing failure, broken parts, and possible steering loss.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note9\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 9:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eShims and Preload 2 \u003c\/strong\u003e\u003cbr\u003eThe Knuckle Bearings MUST be shimmed to provide correct knuckle turning preload. The critical measurement is the amount of force required to move the steering knuckle through the turning arc. The measurement is taken by attaching a beam or dial type torque wrench to one of the King Pin Cap screws. Do NOT install the knuckle seal, axle shaft, or tie rod before setting turning preload. Dana recommends the following turning preload for Dana 25, Dana 27, Dana 30, and standard Dana 44 steering knuckles:\u003cbr\u003e5-10 lbs. ft. for axles with tapered roller bearings top and bottom\u003cbr\u003e10-20 lbs. ft. for axles with upper bronze bushings\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note10\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 10:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eBearing Cup Installer \u003c\/strong\u003e\u003cbr\u003eThe small size of the bearing cups makes them a bit tricky to install. I recommend you also order optional \u003ca href=\"\/products\/1819-qt1819-knuckle-bearing-cup-installer-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQT1819\u003c\/a\u003e Bearing Cup Installer separately.\u003c\/p\u003e \u003cp\u003e\u003ca name=\"note11\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000\"\u003e\u003cstrong\u003eTech Note 11:\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003eMatching Parts\u003c\/strong\u003e\u003cbr\u003eMatching Parts for King Pin Bearing Kit:\u003cbr\u003e\u003ca href=\"\/products\/50784-tk50784-small-knuckle-king-pin-bearing-only-kit\" target=\"_blank\"\u003eTK50784\u003c\/a\u003e Knuckle Bearing Only Kit\u003cbr\u003e\u003ca href=\"\/products\/40564-qu40564-bronze-upper-knuckle-bushing-with-key-slot\" target=\"_blank\"\u003eQU40564\u003c\/a\u003e Keyed Upper King Pin Bushing for Early Dodge and IHC Dana 44\u003cbr\u003e\u003ca href=\"\/products\/40569-qu40569-bronze-upper-knuckle-bushing-with-internal-splines\" target=\"_blank\"\u003eQU40569\u003c\/a\u003e Splined Upper King Pin Bushing for Dodge and IHC Dana 44\u003cbr\u003e\u003ca href=\"\/products\/4939-tka4939-11-piece-premium-steering-knuckle-shim-kit-dana-25-44-axles\" target=\"_blank\"\u003eTKA4939\u003c\/a\u003e and \u003ca href=\"\/products\/40773-qu40773-basic-closed-knuckle-shim-kit-for-dana-25-27-30-44-axles\" target=\"_blank\"\u003eQU40773\u003c\/a\u003e Rectangular Knuckle Shim Kits\u003cbr\u003e\u003ca href=\"\/products\/20091-qu20091-0-005-trapezoid-king-pin-shim-dana-44-closed-knuckle-axles\" target=\"_blank\"\u003eQU20091\u003c\/a\u003e Trapezoid Knuckle Shim\u003cbr\u003e\u003ca href=\"\/products\/40188-qu40188-8-bolt-spicer-knuckle-seal-kit-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQU40188\u003c\/a\u003e 8 Bolt Knuckle Ball Seal Kit Premium Genuine Dana\u003cbr\u003e\u003ca href=\"\/products\/40025-qu40025-axle-shaft-to-spindle-bushing-for-most-dana-closed-knuckles\" target=\"_blank\"\u003eQU40025\u003c\/a\u003e Spindle Bushing for Axle Shaft \u003cbr\u003e\u003ca href=\"\/products\/40507-qa40507-axle-u-joint-for-closed-knuckle-dana-25-27-30-and-44-axles\" target=\"_blank\"\u003eQA40507\u003c\/a\u003e Axle Universal Joint \u003cbr\u003e\u003ca href=\"\/products\/20096-qu20096-king-pin-dampener-and-seal-plate-kit\" target=\"_blank\"\u003eQU20096\u003c\/a\u003e King Pin Dampener Kit for Ford Open Knuckle Axles\u003cbr\u003e\u003ca href=\"\/products\/20231-qu20231-king-pin-bearing-seal-for-1966-1971-ford-bronco-and-f100\" target=\"_blank\"\u003eQU20231\u003c\/a\u003e Seal, For Ford Open Knuckle King Pin Bearings\u003cbr\u003e\u003ca href=\"\/products\/1819-qt1819-knuckle-bearing-cup-installer-for-dana-25-27-30-44-front-axles\" target=\"_blank\"\u003eQT1819\u003c\/a\u003e Bearing Cup Installer\u003cbr\u003e\u003ca href=\"\/products\/777-closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles\"\u003eClosed Knuckle Lube\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/chevy-gmc-manuals\" target=\"_blank\"\u003eChevy \u0026amp; GMC Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/dodge-ram-manuals\" target=\"_blank\"\u003eDodge \u0026amp; Ram Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/ford-manuals\" target=\"_blank\"\u003eFord Shop Manuals\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/jeep-manuals\" target=\"_blank\"\u003eJeep Shop Manuals\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003ca name=\"applications\"\u003e\u003c\/a\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChevrolet\/GMC:\u003cbr\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e\u003cbr\u003eK10\/K15, K20\/K25: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDodge:\u003cbr\u003eClosed Knuckle standard Dana 44\u003c\/strong\u003e\u003cbr\u003eW100, W200: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFord:\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003eClosed Knuckle Dana 25\u003c\/strong\u003e:\u003cbr\u003eGPW military: 1942, 1943, 1944, 1945\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Standard Dana 44\u003c\/strong\u003e:\u003cbr\u003eF-100: 1959, 1960, 1961, 1962, 1963, 1964, 1965\u003cbr\u003eF-250 with standard Model 44 Front Axle: 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Dana 30\u003c\/strong\u003e:\u003cbr\u003eBronco: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cstrong\u003eOpen Knuckle Standard Dana 44\u003c\/strong\u003e:\u003cbr\u003eF-100: 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInternational:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClosed Knuckle Dana 27, 30, 44\u003c\/strong\u003e:\u003cbr\u003eScout: 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003e1\/2 ton and light 3\/4 ton: 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eJeep \u003cbr\u003eClosed Knuckle Dana 25, 27, 30, and 44:\u003c\/strong\u003e\u003cbr\u003eMilitary models MB, M38, M38A1, M170: 1941, 1942, 1943, 1944, 1945, 1946, 1947, 1948, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957\u003cbr\u003eAll civilian Jeeps: 1945, 1946, 1947, 1948, 1950, 1951, 1952, 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971\u003cbr\u003eJeep J-Series full size 4x4s: 1972, 1973\u003c\/p\u003e \u003cp\u003e\u003ca href=\"\/products\/50627-qu50627-timken-small-knuckle-bearing-cup\" target=\"_blank\"\u003eQU50627\u003c\/a\u003e\u003c\/p\u003e","brand":"Torque King Rebuild Kits","offers":[{"title":"Default Title","offer_id":41656723996749,"sku":"4617","price":294.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/files\/QK4617_1.png?v=1785229997"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0206\/5741\/collections\/4x4-front-axles-blue__45653_7a529361-5164-4c14-8466-67a05e57f011.jpg?v=1773182416","url":"https:\/\/torqueking.com\/collections\/1957-1971-dodge-w100-w200-w300-4x4-front-axle.oembed?page=2","provider":"Torque King 4x4","version":"1.0","type":"link"}