Ford Specific Tools

TM2000P NP205 Shop Manual Printed and Spiral Bound with Clear Plastic Covers High Quality, full color printing on 8-1/2" wide x 11" high paper. Has plastic covers and will open flat so you can have the Manual right next to you as you rebuild your NP205...

TM4400 Pinion & Differential Bearing Service on Dana-Spicer Monobeam Axles. When hard working Dana-Spicer drive axles exceed 125,000-150,000 driving miles, it is time to perform a re-bearing job on the pinion and differential bearings. Covers...

QT1058i 1995-1997 Ford F250, F350 4x4 Auto Hub Rounded Hex Front Spindle Nut Socket fits 1995, 1996, 1997 Ford F-250 Dana 50IFS and F-350 Dana 60 MonoBeam 4x4 front axles with factory installed 3-bolt cap automatic locking hubs which use rounded hex...

QT1801 82mm to 3-1/4" OD Transmission, Pinion, Front or Rear Wheel Bearing Cup Installer is used to install many of the Bearing Cups used in Chevy, Dodge, Ford, GMC, and Jeep full sized SUV's, 1/2, 3/4 and 1-ton trucks from 1968 to current. QT1801 fits...

QT1503 Dana 70 and Dana 80 Rear Wheel Seal Installer for Ford and Dodge is specifically made to install QU40449 and similar flanged inner wheel seals in 1970's to current Ford F-350 trucks and 1994 to 2002 Dodge 3/4 ton Ram 2500 and 1 ton Ram 3500...

QT1804 Front or Rear Inner Wheel Bearing Cup Installer for installing QU50396, QU50413, QU50623, and QU50735 Bearing Cups or similar 3-13-16" approximate outside diameter inner wheel bearing cups in many 3/4 and 1-ton wheel hubs. Precision CNC machined...

QK4807 Inner Axle Seal and Tool Kit for Ford 1999-Current Dana 60 and Super 60 Front Axles include QU40244 seals with slinger that are specific to 1999-2010, but the same tools and seals work equally well on 2011 to current Dana Super 60 axles in...

TS4862 Front Axle Inner Oil Seal Remover Set for AAM 925 and Most Dana 60 Front Axles is a real time saver! Use to remove the inner axle shaft oil seals on any 4x4 solid front drive axle with axle housing tube inside diameters of 2" or larger and axle...

QK4983 Universal Dana 60 Oil Bath Inner Axle Seal and Tool Kit with Ford 2nd design universal fit Dana 60 oil bath type inner axle seals and adjustable depth installer tool set is specific to 2011-up Ford Super Duty, but these excellent seals will also...

QT1116 8" Pro Duty Installer Driver Handle with knurled hand grip are used with QT1500 series Seal Installers and QT1800 series Bearing Cup Installers with 5/8'" center holes. Black Oxide finish. 1.25" diameter x 8" usable length for general purpose...

QT1529 Rear Wheel Seal Installer for Ford and GM for 1999-2016 Ford F-250, F-350 trucks with Sterling 10.5" Rear Axles and 2011-up Chevy/GMC 2500 and 3500 with AAM 10.5"/11.5" 14 Bolt Rear Axles is specifically made to install QU20022 (Ford) and...

QT2013 NP205 Dummy Idler Shaft Tool is required to hold the idler shaft bearings, shims, and sleeve together when removing or installing the idler shaft on New Process NP205 transfer cases. An absolute necessity to keep your blood pressure down...